# Dell iDRAC fan controller Docker image
Download Docker image from :
- [Docker Hub](https://hub.docker.com/r/tigerblue77/dell_idrac_fan_controller)
- [GitHub Containers Repository](https://github.com/tigerblue77/Dell_iDRAC_fan_controller_Docker/pkgs/container/dell_idrac_fan_controller)
Table of Contents
- Container console log example
- Usage
- Parameters
- Troubleshooting
- Contributing
## Container console log example
(back to top)
## Prerequisites
### iDRAC version
This Docker container only works on Dell PowerEdge servers that support IPMI commands, i.e. < iDRAC 9 firmware 3.30.30.30.
### To access iDRAC over LAN (not needed in "local" mode) :
1. Log into your iDRAC web console
2. In the left side menu, expand "iDRAC settings", click "Network" then click "IPMI Settings" link at the top of the web page.
3. Check the "Enable IPMI over LAN" checkbox then click "Apply" button.
4. Test access to IPMI over LAN running the following commands :
```bash
apt -y install ipmitool
ipmitool -I lanplus \
-H \
-U \
-P \
sdr elist all
```
(back to top)
## Usage
1. with local iDRAC:
```bash
docker run -d \
--name Dell_iDRAC_fan_controller \
--restart=unless-stopped \
-e IDRAC_HOST=local \
-e FAN_SPEED= \
-e CPU_TEMPERATURE_THRESHOLD= \
-e CHECK_INTERVAL= \
-e DISABLE_THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE= \
--device=/dev/ipmi0:/dev/ipmi0:rw \
tigerblue77/dell_idrac_fan_controller:latest
```
2. with LAN iDRAC:
```bash
docker run -d \
--name Dell_iDRAC_fan_controller \
--restart=unless-stopped \
-e IDRAC_HOST= \
-e IDRAC_USERNAME= \
-e IDRAC_PASSWORD= \
-e FAN_SPEED= \
-e CPU_TEMPERATURE_THRESHOLD= \
-e CHECK_INTERVAL= \
-e DISABLE_THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE= \
tigerblue77/dell_idrac_fan_controller:latest
```
`docker-compose.yml` examples:
1. to use with local iDRAC:
```yml
version: '3'
services:
Dell_iDRAC_fan_controller:
image: tigerblue77/dell_idrac_fan_controller:latest
container_name: Dell_iDRAC_fan_controller
restart: unless-stopped
environment:
- IDRAC_HOST=local
- FAN_SPEED=
- CPU_TEMPERATURE_THRESHOLD=
- CHECK_INTERVAL=
- DISABLE_THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE=
devices:
- /dev/ipmi0:/dev/ipmi0:rw
```
2. to use with LAN iDRAC:
```yml
version: '3'
services:
Dell_iDRAC_fan_controller:
image: tigerblue77/dell_idrac_fan_controller:latest
container_name: Dell_iDRAC_fan_controller
restart: unless-stopped
environment:
- IDRAC_HOST=
- IDRAC_USERNAME=
- IDRAC_PASSWORD=
- FAN_SPEED=
- CPU_TEMPERATURE_THRESHOLD=
- CHECK_INTERVAL=
- DISABLE_THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE=
```
(back to top)
## Parameters
All parameters are optional as they have default values (including default iDRAC username and password).
- `IDRAC_HOST` parameter can be set to "local" or to your distant iDRAC's IP address. **Default** value is "local".
- `IDRAC_USERNAME` parameter is only necessary if you're adressing a distant iDRAC. **Default** value is "root".
- `IDRAC_PASSWORD` parameter is only necessary if you're adressing a distant iDRAC. **Default** value is "calvin".
- `FAN_SPEED` parameter can be set as a decimal (from 0 to 100%) or hexadecimaladecimal value (from 0x00 to 0x64) you want to set the fans to. **Default** value is 5(%).
- `CPU_TEMPERATURE_THRESHOLD` parameter is the T°junction (junction temperature) threshold beyond which the Dell fan mode defined in your BIOS will become active again (to protect the server hardware against overheat). **Default** value is 50(°C).
- `CHECK_INTERVAL` parameter is the time (in seconds) between each temperature check and potential profile change. **Default** value is 60(s).
- `DISABLE_THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE` parameter is a boolean that allows to disable third-party PCIe card Dell default cooling response. **Default** value is false.
(back to top)
## Troubleshooting
If your server frequently switches back to the default Dell fan mode:
1. Check `Tcase` (case temperature) of your CPU on Intel Ark website and then set `CPU_TEMPERATURE_THRESHOLD` to a slightly lower value. Example with my CPUs ([Intel Xeon E5-2630L v2](https://www.intel.com/content/www/us/en/products/sku/75791/intel-xeon-processor-e52630l-v2-15m-cache-2-40-ghz/specifications.html)) : Tcase = 63°C, I set `CPU_TEMPERATURE_THRESHOLD` to 60(°C).
2. If it's already good, adapt your `FAN_SPEED` value to increase the airflow and thus further decrease the temperature of your CPU(s)
3. If neither increasing the fan speed nor increasing the threshold solves your problem, then it may be time to replace your thermal paste
(back to top)
## Contributing
Contributions are what make the open source community such an amazing place to learn, inspire, and create. Any contributions you make are **greatly appreciated**.
If you have a suggestion that would make this better, please fork the repo and create a pull request. You can also simply open an issue with the tag "enhancement".
Don't forget to give the project a star! Thanks again!
1. Fork the Project
2. Create your Feature Branch (`git checkout -b feature/AmazingFeature`)
3. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
4. Push to the Branch (`git push origin feature/AmazingFeature`)
5. Open a Pull Request
(back to top)