bump version to 1.0.9

To avoid confusion and because umsel now has a dedicated support object.

README

@@ -42,3 +42,83 @@ If MAP fails when remaking the UmTRX FPGA bitstream under Ubuntu Linux for ISE v
 after sourcing the Xilinx settings and before issuing:
 
     make -f Makefile.UmTRX
+
+Changes April 2014
+====
+
+The UMTRX repository builds against stock UHD HEAD as a runtime loadable module.
+ * The host/ directory contains all files needed to build the loadable module.
+ * The fpga/ directory contains all files needed to build the FPGA bin file.
+ * the zpu/ directory contains all files needed to build the firmware bin file.
+
+The host contains a missing/ folder for symbols missing from libuhd library.
+These calls were declared in a public header, but not exported with UHD_API.
+Someone should upstream a patch to the UHD maintainers.
+
+The host contains a cores/ folder for configuring common FPGA cores
+and interfacing with receive and transmit VITA streaming interfaces.
+The cores are copied from mainline UHD and should be versioned with the FPGA code.
+
+The host build installs umtrx_net_burner in the bin/ directory.
+The umtrx_net_burner is the usrp2 net burner with umtrx support.
+
+The host build installs a umtrx_test_chains executable into the bin/ directory.
+The umtrx_test_chains utility is used to confirm configuration and communication
+for each RX and TX VITA streaming interface and multi-channel/MIMO streaming.
+The MIMO RX test fails when a small number of samples is specified (--nsamps=100).
+(FIXME reason unknown)
+
+Reimplemented db_lms.cpp as lms6002d_ctrl.cpp and lms6002d_ctrl.hpp files.
+The lms6002d_ctrl class is directly instantiated inside the umtrx_impl constructor.
+Previously dboard_iface.cpp had modifications to write identical values to both SPI_SS_AUX1 and SPI_SS_AUX1.
+This modifcation was lost in the update and may need to be restored if deemed necessary.
+
+The older u2plus_umtrx.v (non v2) has not been updated with the v2 changes and is currently unbuildable.
+
+The UmTRX now support fast commands and timed commands through settings_fifo_ctrl.v
+This includes fast and timed SPI which now hangs off the same fast setting bus.
+
+The fpga core and top level are no longer ifdef'd from the old u2plus code.
+The ifdefs and extraneous code not related to UmTRX has been removed.
+
+The umtrx_core.v now has 3 major clock domains.
+ * sys_clk - 104 MHz for the packet router and fifo signals
+ * dsp_clk - 26 MHz for ADC/DAC, VITA time, VITA de/framer
+ * fe_clk - 13 MHz for DSP chain and frontend corrections
+
+The host master clock rate now reports 26 MHz for the tick_rate.
+
+ADC/DAC signals are registered in the lms_clk without combinatorial logic
+to guarantee that all signals are driven directly by the flops in the IOBs.
+
+Updated fpga/timing/time_64bit.v which may have removed PPS pipeline changes.
+
+Replaced packet_router.v with umtrx_router.v and umtrx_packet_dispatcher.v modules.
+The new router supports ZPU, FIFO control port, quad RX DSP ports, and dual TX DSP ports.
+The umtrx_packet_dispatcher uses VITA SID to determine the output destination.
+The outgoing router mux may require buffering between RX VITA fifos and mux --
+for worst case buffering when all four RX DSPs are streaming to the router.
+
+The tx protocol framer has been expanded to frame up to 8 unique UDP destinations.
+The protocol framer has its own dedicated settings bus on a dedicated wishbone slave.
+Modified add_routing_header.v and gen_context_pkt.v to accept arbitrary framer destinations.
+
+Created umtrx_rx_chain.v to contain ddc core, vita framer, and clock crossing.
+Four instantiations exist in umtrx_core.v, with instance 2 and 3 commented out.
+All instantiations are connected to the router, ADC lines, and frontend switch.
+The RX frontend switch is configurable with the host's RX subdevice specification.
+The host code has only been partially modified to support all 4 RX DSP chains.
+
+Created umtrx_tx_chain.v to contain duc core, vita deframer, and clock crossing.
+This module also contains the tx_frontend corrections module.
+TX chains are hard-tied to a particular DAC bus -- no frontend switch.
+However, the software API should support DSP selection via stream_args_t.
+
+The RXIQSEL signals are not synchronized between LMS A and B.
+If the RXIQSEL signals are used to drive a valid sample strobe,
+then RX VITA time alignment will not be possible due to ambiguity.
+Currently, the adc sample strobes are driven from a common sigal.
+
+simple_gemac_wrapper.v was modified to have an axi_packet_gate in the eth transmit direction.
+This guarantees thats a packet is 100% buffered before being send out over ethernet.
+This avoid in-packet underflow when the mac is fed from a slower clock domain.

debian/changelog

@@ -0,0 +1,73 @@
+umtrx (1.0.9) trusty; urgency=low
+
+  * collectd: osmo-nitb counter collection plugin
+
+ -- Kirill Zakharenko <earwin@gmail.com>  Mon, 24 Feb 2016 19:35:56 +0300
+
+umtrx (1.0.8) trusty; urgency=low
+
+  * host: integrate support class for umsel2
+  * host: integrate support class for umsel2
+  * host: implement selection for umsel2 + lms
+  * host: umsel2 register work for adf355-2
+  * host: umsel2 adf355-2 tuning algorithm
+  * host: freq update sequence, copied registers from gui
+  * host: print locked for debugging
+  * umsel: device args for enabling umsel2 and verbose
+  * add lmsvga1 device args parameter to override VGA1_DEF
+  * autodetect DCDC translation version on startup
+  * add lmsvga2 args parameter to override UMTRX_VGA2_DEF
+  * turn off vin bypass to amplifiers by default
+  * throw exception if incorrect DCDC version were provided
+
+ -- Kirill Zakharenko <earwin@gmail.com>  Mon, 28 Dec 2015 15:07:56 +0300
+
+umtrx (1.0.7) trusty; urgency=low
+
+  * host: Properly handle most corner cases in VSWR calculations
+  * host: Add "STRING" to umtrx_monitor error output
+  * host: Add string getters/setters to the Python property tree library
+  * host: Checking in umtrx_query_versions.py
+  * debian: packaged python utils in host/utils
+
+ -- Kirill Zakharenko <earwin@gmail.com>  Mon, 25 Dec 2015 19:35:56 +0100
+
+umtrx (1.0.6) trusty; urgency=low
+
+  * host: make boost property tree thread safe
+  * host: support string type in JSON query
+  * debian: build now produces an additional package with debug symbols
+  * umtrx_firmware: fixed typo preventing it from working
+
+ -- Kirill Zakharenko <earwin@gmail.com>  Mon, 21 Dec 2015 14:23:56 +0300
+
+umtrx (1.0.5) trusty; urgency=low
+
+  * host: disable umtrx_fifo_ctrl cache of spi config
+  * host: Fix getters in umtrx_property_tree.py.
+  * debian: added firmware to package and umtrx_firmware script to handle it
+  * fpga: created axi stream controled spi core
+  * fpga: use axi stream spi core (still single dest)
+  * fpga: connect both spi settings drivers
+  * fpga: simplify spi setting regs with generate loop
+  * fpga: updated 4x ddc image for spi work
+
+ -- Kirill Zakharenko <earwin@gmail.com>  Mon, 23 Nov 2015 15:51:56 +0300
+
+umtrx (1.0.4) unstable; urgency=low
+
+  * Do not add 'g' to a git id when creating a version string.
+  * Proper debianization.
+  * Add ability to set diversity switches position from UHD args.
+  * By default route each Rx channel to it's own antenna.
+  * JSON API to question/control property tree of a running UHD app. Useful for querying sensors and for debugging purposes.
+  * Python utility to query VSWR from a running UHD app in real time using JSON API.
+  * Fix DC and IQ calibration utilities.
+
+ -- Alexander Chemeris <Alexander.Chemeris@fairwaves.co>  Tue, 21 Jul 2015 18:51:56 -0400
+
+umtrx (1.0.3) unstable; urgency=low
+
+  * Created debian control files for 1.0.3 release of umtrx
+
+ -- Josh Blum <josh@pothosware.com>  Sat, 20 Jun 2015 16:31:24 -0700

debian/compat

@@ -0,0 +1 @@
+9

debian/control

@@ -0,0 +1,40 @@
+Source: umtrx
+Section: libs
+Priority: optional
+Maintainer: Josh Blum <josh@pothosware.com>
+Build-Depends:
+    debhelper (>= 9.0.0),
+    cmake (>= 2.8),
+    libboost-all-dev,
+    libuhd-dev (>= 3.7)
+Standards-Version: 3.9.5
+Homepage: http://umtrx.org/
+Vcs-Git: https://github.com/fairwaves/UHD-Fairwaves.git
+Vcs-Browser: https://github.com/fairwaves/UHD-Fairwaves
+
+Package: umtrx
+Section: libs
+Architecture: any
+Pre-Depends: multiarch-support, ${misc:Pre-Depends}
+Depends: ${shlibs:Depends}, ${misc:Depends}, uhd-umtrx
+Conflicts: umtrx-uhd
+Replaces: umtrx-uhd
+Recommends: python
+Description: Fairwaves UmTRX driver - runtime utilities
+ The industrial grade dual-channel wide-band SDR transceiver.
+
+Package: uhd-umtrx
+Section: libs
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Conflicts: umtrx-uhd
+Replaces: umtrx-uhd
+Description: Fairwaves UmTRX driver - UHD plugin module
+ The industrial grade dual-channel wide-band SDR transceiver.
+
+Package: umtrx-dbg
+Section: debug
+Architecture: any
+Depends: umtrx, uhd-umtrx, ${misc:Depends}
+Description: Fairwaves UmTRX driver - debug symbols
+ The industrial grade dual-channel wide-band SDR transceiver.

debian/copyright

@@ -0,0 +1,12 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: umtrx
+Source: https://github.com/fairwaves/UHD-Fairwaves
+
+Files: *
+Copyright:
+    Copyright 2012-2015 Fairwaves LLC
+    Copyright 2010-2012 Ettus Research LLC
+License: GPL-3
+ On Debian systems, the full text of the GNU General Public
+ License version 3 can be found in the file
+ `/usr/share/common-licenses/GPL-3'.

debian/docs

@@ -0,0 +1 @@
+README

debian/rules

@@ -0,0 +1,21 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+
+DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)
+export DEB_HOST_MULTIARCH
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# This has to be exported to make some magic below work.
+export DH_OPTIONS
+
+
+%:
+	dh $@ --buildsystem=cmake --parallel --sourcedirectory=host
+
+override_dh_auto_configure:
+	dh_auto_configure -- -DLIB_SUFFIX="/$(DEB_HOST_MULTIARCH)"
+
+override_dh_strip:
+	dh_strip --dbg-package=umtrx-dbg

debian/source/format

@@ -0,0 +1 @@
+3.0 (native)

debian/uhd-umtrx.install

@@ -0,0 +1 @@
+usr/lib/*/uhd/modules/

debian/umtrx.install

@@ -0,0 +1,8 @@
+usr/bin
+images/u2plus_umtrx_v2.bin images/umtrx_txrx_uhd.bin usr/share/umtrx/firmware
+host/utils/umtrx_property_tree.py host/utils/umtrx_vswr.py usr/share/umtrx
+host/utils/umtrx_query_sensors.py host/utils/umtrx_query_versions.py host/utils/umtrx_net_burner.py usr/share/umtrx
+
+host/utils/collectd/umtrx.types.db usr/share/collectd
+host/utils/collectd/umtrx2collectd.py usr/share/umtrx
+host/utils/collectd/umtrx.conf etc/collectd/collectd.conf.d

debian/umtrx.links

@@ -0,0 +1,3 @@
+/usr/share/umtrx/umtrx_net_burner.py /usr/bin/umtrx_net_burner
+/usr/share/umtrx/umtrx_query_sensors.py /usr/bin/umtrx_query_sensors
+/usr/share/umtrx/umtrx_query_versions.py /usr/bin/umtrx_query_versions

firmware/README

@@ -1,6 +0,0 @@
-########################################################################
-# Firmware for USRP devices
-########################################################################
-
-fx2 - firmware for USRP1
-zpu - firmware for USRP2 and N Series

firmware/fx2/.gitignore

@@ -1,2 +0,0 @@
-/build
-*.sym

firmware/fx2/AUTHORS

@@ -1,4 +0,0 @@
-Eric Blossom <eb@comsec.org>
-Josh Blum <josh@joshknows.com>
-Thomas Tsou <ttsou@vt.edu>
-Nick Foster <nick@nerdnetworks.org>

firmware/fx2/CMakeLists.txt

@@ -1,49 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-CMAKE_MINIMUM_REQUIRED(VERSION 2.6)
-set(CMAKE_TOOLCHAIN_FILE ${CMAKE_SOURCE_DIR}/config/Toolchain-sdcc.cmake)
-PROJECT(USRP1 C)
-set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/config/")
-INCLUDE(FindPythonInterp)
-
-########################################################################
-# Set toolchain to use SDCC
-########################################################################
-# we're doing mixed ASM and C
-ENABLE_LANGUAGE(ASM_SDCC)
-
-########################################################################
-# C flags and linking flags
-########################################################################
-ADD_DEFINITIONS(-DHAVE_USRP2)
-set(CMAKE_C_LINK_FLAGS "--code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000'")
-set(CMAKE_C_FLAGS "--no-xinit-opt")
-
-########################################################################
-# Setup precompile tools
-########################################################################
-set(REG_GENERATOR ${CMAKE_SOURCE_DIR}/utils/generate_regs.py)
-set(EDIT_GPIF_USRP1 ${CMAKE_SOURCE_DIR}/utils/edit-gpif.py)
-set(EDIT_GPIF_B100 ${CMAKE_SOURCE_DIR}/utils/edit-gpif-b100.py)
-set(BUILD_EEPROM ${CMAKE_SOURCE_DIR}/utils/build_eeprom.py)
-
-########################################################################
-# Add the subdirectories
-########################################################################
-ADD_SUBDIRECTORY(usrp1)
-ADD_SUBDIRECTORY(b100)

firmware/fx2/b100/.gitignore

@@ -1,19 +0,0 @@
-/*.ihx
-/*.lnk
-/*.lst
-/*.map
-/*.mem
-/*.rel
-/*.rst
-/*.sym
-/blink_leds.asm
-/usrp_common.asm
-/command_loop.asm
-/fpga.asm
-/*.asm
-/Makefile
-/Makefile.in
-/usrp_gpif.c
-/usrp_gpif_inline.h
-/Makefile.in
-/burn-usrp1p-eeprom

firmware/fx2/b100/CMakeLists.txt

@@ -1,88 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-include_directories(${CMAKE_SOURCE_DIR}/common)
-
-#for usrp_common.h and the regs files...
-set(CMAKE_INCLUDE_CURRENT_DIR ON)
-
-#now make a lib to link against
-set(libb100_sources 
-    ${CMAKE_SOURCE_DIR}/common/delay.c
-    ${CMAKE_SOURCE_DIR}/common/fx2utils.c
-    ${CMAKE_SOURCE_DIR}/common/i2c.c
-    ${CMAKE_SOURCE_DIR}/common/init_gpif.c
-    ${CMAKE_SOURCE_DIR}/common/isr.c
-    ${CMAKE_SOURCE_DIR}/common/timer.c
-    ${CMAKE_SOURCE_DIR}/common/usb_common.c
-#    ${CMAKE_SOURCE_DIR}/common/spi.c
-)
-
-#file(GLOB libb100_c_sources ${CMAKE_SOURCE_DIR}/common/*.c)
-#file(GLOB libb100_a51_sources ${CMAKE_SOURCE_DIR}/common/*.a51)
-#list(APPEND libb100_sources ${libb100_c_sources} ${libb100_a51_sources})
-
-add_library(libb100 STATIC ${libb100_sources})
-
-# edit-gpif hacks up gpif.c for our purposes. no major surgery, just moving stuff around.
-set(GPIF_SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/gpif.c)
-set(GPIF_SOURCE_OUTPUT ${CMAKE_CURRENT_SOURCE_DIR}/usrp_gpif.c)
-set(GPIF_HEADER_OUTPUT ${CMAKE_CURRENT_SOURCE_DIR}/usrp_gpif_inline.h)
-
-add_custom_command(
-        OUTPUT ${GPIF_SOURCE_OUTPUT}
-        DEPENDS ${EDIT_GPIF_B100}
-        COMMAND ${PYTHON_EXECUTABLE} ${EDIT_GPIF_B100} ${GPIF_SOURCE} ${GPIF_SOURCE_OUTPUT} ${GPIF_HEADER_OUTPUT}
-        COMMENT "Generating ${GPIF_SOURCE_OUTPUT}"
-)
-
-#file(GLOB b100_sources *.c)
-set(b100_sources 
-    ${CMAKE_SOURCE_DIR}/common/vectors.a51
-    usrp_main.c
-    usrp_common.c 
-    board_specific.c 
-    fpga_load.c 
-    fpga_rev2.c 
-    usrp_gpif.c 
-    usb_descriptors.a51
-    eeprom_io.c
-    ${CMAKE_SOURCE_DIR}/common/_startup.a51
-)
-
-set_source_files_properties(
-    ${CMAKE_CURRENT_SOURCE_DIR}/usrp_main.c
-    PROPERTIES COMPILE_FLAGS "--std-sdcc99 --opt-code-speed --fommit-frame-pointer"
-)
-
-add_executable(b100_fw ${b100_sources})
-target_link_libraries(b100_fw libb100)
-
-set(eeprom1p_sources
-    ${CMAKE_SOURCE_DIR}/common/eeprom_boot.a51
-    ${CMAKE_SOURCE_DIR}/common/eeprom_init.c
-    ${CMAKE_SOURCE_DIR}/common/_startup.a51
-)
-
-add_custom_target(b100_eeprom ALL
-    DEPENDS b100_boot
-    COMMAND objcopy -I ihex -O binary b100_boot.ihx b100_boot.bin
-    COMMAND ${PYTHON_EXECUTABLE} ${BUILD_EEPROM} -r2 b100_boot.bin b100_eeprom.bin
-)
-
-add_executable(b100_boot ${eeprom1p_sources})
-target_link_libraries(b100_boot libb100)

firmware/fx2/b100/board_specific.c

@@ -1,70 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "usrp_common.h"
-
-void
-set_led_0 (unsigned char on)
-{
-  if (!on)			// active low
-    USRP_PC |= bmPC_LED0;
-  else
-    USRP_PC &= ~bmPC_LED0;
-}
-
-void 
-set_led_1 (unsigned char on)
-{
-  if (!on)			// active low
-    USRP_PC |= bmPC_LED1;
-  else
-    USRP_PC &= ~bmPC_LED1;
-}
-
-void
-toggle_led_0 (void)
-{
-  USRP_PC ^= bmPC_LED0;
-}
-
-void
-toggle_led_1 (void)
-{
-  USRP_PC ^= bmPC_LED1;
-}
-
-void
-set_sleep_bits (unsigned char bits, unsigned char mask)
-{
-  // NOP on usrp1
-}
-
-static xdata unsigned char xbuf[1];
-
-void
-init_board (void)
-{
-  //init_spi ();
-
-  //USRP_PC &= ~bmPC_nRESET;	// active low reset
-  //USRP_PC |= bmPC_nRESET;
-}

firmware/fx2/b100/eeprom_io.c

@@ -1,65 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2006 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "eeprom_io.h"
-#include "i2c.h"
-#include "delay.h"
-
-// returns non-zero if successful, else 0
-unsigned char
-eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
-	     xdata unsigned char *buf, unsigned char len)
-{
-  // We setup a random read by first doing a "zero byte write".
-  // Writes carry an address.  Reads use an implicit address.
-
-  static xdata unsigned char cmd[1];
-  cmd[0] = eeprom_offset;
-  if (!i2c_write(i2c_addr, cmd, 1))
-    return 0;
-
-  return i2c_read(i2c_addr, buf, len);
-}
-
-
-#if 0
-
-// returns non-zero if successful, else 0
-unsigned char
-eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
-	      const xdata unsigned char *buf, unsigned char len)
-{
-  static xdata unsigned char cmd[2];
-  unsigned char ok;
-
-  while (len-- > 0){
-    cmd[0] = eeprom_offset++;
-    cmd[1] = *buf++;
-    ok = i2c_write(i2c_addr, cmd, 2);
-    mdelay(10);		// delay 10ms worst case write time
-    if (!ok)
-      return 0;
-  }
-  return 1;
-}
-
-#endif

firmware/fx2/b100/eeprom_io.h

@@ -1,38 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2006 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef INCLUDED_EEPROM_IO_H
-#define INCLUDED_EEPROM_IO_H
-
-
-// returns non-zero if successful, else 0
-unsigned char
-eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
-	     xdata unsigned char *buf, unsigned char len);
-
-// returns non-zero if successful, else 0
-unsigned char
-eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
-	      const xdata unsigned char *buf, unsigned char len);
-
-
-#endif /* INCLUDED_EEPROM_IO_H */

firmware/fx2/b100/fpga_load.c

@@ -1,183 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-#include "fpga_load.h"
-#include "delay.h"
-
-/*
- * setup altera FPGA serial load (PS).
- *
- * On entry:
- *	don't care
- *
- * On exit:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- */
-unsigned char
-fpga_load_begin (void)
-{
-  USRP_ALTERA_CONFIG &= ~bmALTERA_BITS;		// clear all bits (NCONFIG low)
-  udelay (40);					// wait 40 us
-  USRP_ALTERA_CONFIG |= bmALTERA_NCONFIG;	// set NCONFIG high
-
-  // ready to xfer now
-
-  return 1;
-}
-
-/*
- * clock out the low bit of bits.
- *
- * On entry:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- *
- * On exit:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- */
-
-
-#if 0
-
-static void
-clock_out_config_byte (unsigned char bits)
-{
-  unsigned char i;
-
-  // clock out configuration byte, least significant bit first
-
-  for (i = 0; i < 8; i++){
-
-    bitALTERA_DATA0 = bits & 1;
-    bitALTERA_DCLK = 1;		/* set DCLK to 1 */
-    bitALTERA_DCLK = 0;		/* set DCLK to 0 */
-
-    bits = bits >> 1;
-  }
-}
-	
-#else
-
-static void 
-clock_out_config_byte (unsigned char bits) _naked
-{
-    _asm
-	mov	a, dpl
-	
-	rlc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rlc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rlc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rlc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rlc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rlc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rlc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rlc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	ret	
-
-    _endasm;
-}
-
-#endif
-
-static void
-clock_out_bytes (unsigned char bytecount,
-		 unsigned char xdata *p)
-{
-  while (bytecount-- > 0)
-    clock_out_config_byte (*p++);
-}
-
-/*
- * Transfer block of bytes from packet to FPGA serial configuration port
- *
- * On entry:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- *
- * On exit:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- */
-unsigned char
-fpga_load_xfer (xdata unsigned char *p, unsigned char bytecount)
-{
-  clock_out_bytes (bytecount, p);
-  return 1;
-}
-
-/*
- * check for successful load...
- */
-unsigned char
-fpga_load_end (void)
-{
-  unsigned char status = USRP_ALTERA_CONFIG;
-
-  if (!UC_BOARD_HAS_FPGA)			// always true if we don't have FPGA
-    return 1;
-
-  if (bitALTERA_CONF_DONE)
-    return 1;					// everything's cool
-
-  // I don't think this should happen.  It indicates that
-  // programming is still in progress.
-
-  return 0;
-}

firmware/fx2/b100/fpga_rev2.c

@@ -1,51 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "fpga.h"
-#include "fpga_regs_common.h"
-#include "usrp_common.h"
-#include "usrp_globals.h"
-
-unsigned char g_tx_reset = 0;
-unsigned char g_rx_reset = 0;
-
-void
-fpga_write_reg (unsigned char regno, const xdata unsigned char *regval)
-{
-	//nop
-}
-
-
-static xdata unsigned char regval[4] = {0, 0, 0, 0};
-
-// Resets both AD9862's and the FPGA serial bus interface.
-
-void
-fpga_set_reset (unsigned char on)
-{
-  on &= 0x1;
-
-  if (on){
-  }
-  else
-    ;
-}

firmware/fx2/b100/fpga_rev2.h

@@ -1,44 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003,2004 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#ifndef INCLUDED_FPGA_REV1_H
-#define INCLUDED_FPGA_REV1_H
-
-/*
- * return TRUE if FPGA internal fifo has room for a single packet
- */
-#define fpga_has_room_for_data_packet()	(!(GPIFREADYSTAT & bmDATA_FIFO_FULL))
-#define fpga_has_room_for_ctrl_packet()	(!(GPIFREADYSTAT & bmCTRL_FIFO_FULL))
-
-/*
- * return TRUE if FPGA internal fifo has at least one packet available
- */
-#define fpga_has_data_packet_avail()		(!(GPIFREADYSTAT & bmDATA_EMPTY))
-#define fpga_has_ctrl_packet_avail()            (!(GPIFREADYSTAT & bmCTRL_EMPTY))
-
-#define fx2_has_ctrl_packet_avail()         (!(EP24FIFOFLGS & EP4FIFOEMPTY))
-#define fx2_has_data_packet_avail()         (!(EP24FIFOFLGS & EP2FIFOEMPTY))
-
-#define fx2_has_room_for_ctrl_packet()      (!(EP8CS & bmEPFULL))
-#define fx2_has_room_for_data_packet()      (!(EP6CS & bmEPFULL))
-
-#define fx2_gpif_is_idle()                  (GPIFTRIG & bmGPIF_IDLE) 
-
-#endif /* INCLUDED_FPGA_REV1_H */

firmware/fx2/b100/gpif.c

@@ -1,292 +0,0 @@
-// This program configures the General Programmable Interface (GPIF) for FX2.     
-// Please do not modify sections of text which are marked as "DO NOT EDIT ...". 
-//                                                                                
-// DO NOT EDIT ...                  
-// GPIF Initialization              
-// Interface Timing      Async        
-// Internal Ready Init   IntRdy=1     
-// CTL Out Tristate-able Binary       
-// SingleWrite WF Select     1     
-// SingleRead WF Select      0     
-// FifoWrite WF Select       3     
-// FifoRead WF Select        2     
-// Data Bus Idle Drive   Tristate     
-// END DO NOT EDIT                  
-                                    
-// DO NOT EDIT ...       
-// GPIF Wave Names       
-// Wave 0   = singlerd     
-// Wave 1   = singlewr     
-// Wave 2   = FIFORd       
-// Wave 3   = FIFOWr       
-                         
-// GPIF Ctrl Outputs   Level   
-// CTL 0    = WEN#     CMOS        
-// CTL 1    = REN#     CMOS        
-// CTL 2    = OE#      CMOS        
-// CTL 3    = EP       CMOS        
-// CTL 4    = unused   CMOS        
-// CTL 5    = unused   CMOS        
-                               
-// GPIF Rdy Inputs         
-// RDY0     = EF#            
-// RDY1     = FF#            
-// RDY2     = DRDY         
-// RDY3     = CRDY         
-// RDY4     = unused         
-// RDY5     = TCXpire        
-// FIFOFlag = FIFOFlag       
-// IntReady = IntReady       
-// END DO NOT EDIT         
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 0: singlerd                                                                
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data            
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A                                                                                
-//   LFunc                                                                                 
-//   Term B                                                                                
-// Branch1                                                                                 
-// Branch0                                                                                 
-// Re-Exec                                                                                 
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 1: singlewr                                                                
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate           
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A           EF#                                                                  
-//   LFunc            AND                                                                  
-//   Term B           EF#                                                                  
-// Branch1            ThenIdle                                                             
-// Branch0            ElseIdle                                                             
-// Re-Exec            No                                                                   
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         1         1         1         1         1         1         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 2: FIFORd                                                                  
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data            
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1             
-//   Term A           TCXpire             TCXpire                                          
-//   LFunc            AND                 AND                                              
-//   Term B           TCXpire             TCXpire                                          
-// Branch1            Then 2              ThenIdle                                         
-// Branch0            Else 1              ElseIdle                                         
-// Re-Exec            No                  No                                               
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         1         0         0         0         0         0         0         0    
-// OE#          1         1         1         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 3: FIFOWr                                                                  
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate           
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A           TCXpire                                                              
-//   LFunc            AND                                                                  
-//   Term B           TCXpire                                                              
-// Branch1            ThenIdle                                                             
-// Branch0            Else 1                                                               
-// Re-Exec            No                                                                   
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-                                              
-// GPIF Program Code                          
-                                              
-// DO NOT EDIT ...                            
-#include "fx2.h"                            
-#include "fx2regs.h"                        
-#include "fx2sdly.h"     // SYNCDELAY macro 
-// END DO NOT EDIT                            
-                                              
-// DO NOT EDIT ...                     
-const char xdata WaveData[128] =     
-{                                      
-// Wave 0 
-/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-// Wave 1 
-/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
-/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,
-/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-// Wave 2 
-/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,
-/* Output*/ 0x06,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,
-// Wave 3 
-/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
-/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-};                     
-// END DO NOT EDIT     
-                       
-// DO NOT EDIT ...                     
-const char xdata FlowStates[36] =   
-{                                      
-/* Wave 0 FlowStates */ 0x81,0x2D,0x0E,0x00,0x00,0x04,0x03,0x02,0x00,
-/* Wave 1 FlowStates */ 0x81,0x2D,0x09,0x00,0x00,0x04,0x03,0x02,0x00,
-/* Wave 2 FlowStates */ 0x81,0x2D,0x06,0x00,0x00,0x04,0x03,0x02,0x00,
-/* Wave 3 FlowStates */ 0x81,0x2D,0x01,0x00,0x00,0x04,0x03,0x02,0x00,
-};                     
-// END DO NOT EDIT     
-                       
-// DO NOT EDIT ...                                               
-const char xdata InitData[7] =                                   
-{                                                                
-/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00     
-};                                                               
-// END DO NOT EDIT                                               
-                                                                 
-// TO DO: You may add additional code below.
-
-void GpifInit( void )
-{
-  BYTE i;
- 
-  // Registers which require a synchronization delay, see section 15.14
-  // FIFORESET        FIFOPINPOLAR
-  // INPKTEND         OUTPKTEND
-  // EPxBCH:L         REVCTL
-  // GPIFTCB3         GPIFTCB2
-  // GPIFTCB1         GPIFTCB0
-  // EPxFIFOPFH:L     EPxAUTOINLENH:L
-  // EPxFIFOCFG       EPxGPIFFLGSEL
-  // PINFLAGSxx       EPxFIFOIRQ
-  // EPxFIFOIE        GPIFIRQ
-  // GPIFIE           GPIFADRH:L
-  // UDMACRCH:L       EPxGPIFTRIG
-  // GPIFTRIG
-  
-  // Note: The pre-REVE EPxGPIFTCH/L register are affected, as well...
-  //      ...these have been replaced by GPIFTC[B3:B0] registers
- 
-  // 8051 doesn't have access to waveform memories 'til
-  // the part is in GPIF mode.
- 
-  IFCONFIG = 0xEE;
-  // IFCLKSRC=1   , FIFOs executes on internal clk source
-  // xMHz=1       , 48MHz internal clk rate
-  // IFCLKOE=0    , Don't drive IFCLK pin signal at 48MHz
-  // IFCLKPOL=0   , Don't invert IFCLK pin signal from internal clk
-  // ASYNC=1      , master samples asynchronous
-  // GSTATE=1     , Drive GPIF states out on PORTE[2:0], debug WF
-  // IFCFG[1:0]=10, FX2 in GPIF master mode
- 
-  GPIFABORT = 0xFF;  // abort any waveforms pending
- 
-  GPIFREADYCFG = InitData[ 0 ];
-  GPIFCTLCFG = InitData[ 1 ];
-  GPIFIDLECS = InitData[ 2 ];
-  GPIFIDLECTL = InitData[ 3 ];
-  GPIFWFSELECT = InitData[ 5 ];
-  GPIFREADYSTAT = InitData[ 6 ];
- 
-  // use dual autopointer feature... 
-  AUTOPTRSETUP = 0x07;          // inc both pointers, 
-                                // ...warning: this introduces pdata hole(s)
-                                // ...at E67B (XAUTODAT1) and E67C (XAUTODAT2)
-  
-  // source
-  AUTOPTRH1 = MSB( &WaveData );
-  AUTOPTRL1 = LSB( &WaveData );
-  
-  // destination
-  AUTOPTRH2 = 0xE4;
-  AUTOPTRL2 = 0x00;
- 
-  // transfer
-  for ( i = 0x00; i < 128; i++ )
-  {
-    EXTAUTODAT2 = EXTAUTODAT1;
-  }
- 
-// Configure GPIF Address pins, output initial value,
-  PORTCCFG = 0xFF;    // [7:0] as alt. func. GPIFADR[7:0]
-  OEC = 0xFF;         // and as outputs
-  PORTECFG |= 0x80;   // [8] as alt. func. GPIFADR[8]
-  OEE |= 0x80;        // and as output
- 
-// ...OR... tri-state GPIFADR[8:0] pins
-//  PORTCCFG = 0x00;  // [7:0] as port I/O
-//  OEC = 0x00;       // and as inputs
-//  PORTECFG &= 0x7F; // [8] as port I/O
-//  OEE &= 0x7F;      // and as input
- 
-// GPIF address pins update when GPIFADRH/L written
-  SYNCDELAY;                    // 
-  GPIFADRH = 0x00;    // bits[7:1] always 0
-  SYNCDELAY;                    // 
-  GPIFADRL = 0x00;    // point to PERIPHERAL address 0x0000
- 
-// Configure GPIF FlowStates registers for Wave 0 of WaveData
-  FLOWSTATE = FlowStates[ 0 ];
-  FLOWLOGIC = FlowStates[ 1 ];
-  FLOWEQ0CTL = FlowStates[ 2 ];
-  FLOWEQ1CTL = FlowStates[ 3 ];
-  FLOWHOLDOFF = FlowStates[ 4 ];
-  FLOWSTB = FlowStates[ 5 ];
-  FLOWSTBEDGE = FlowStates[ 6 ];
-  FLOWSTBHPERIOD = FlowStates[ 7 ];
-}
- 

firmware/fx2/b100/usb_descriptors.a51

@@ -1,500 +0,0 @@
-;;; -*- asm -*-
-;;;
-;;; Copyright 2003 Free Software Foundation, Inc.
-;;; 
-;;; This file is part of GNU Radio
-;;; 
-;;; GNU Radio is free software; you can redistribute it and/or modify
-;;; it under the terms of the GNU General Public License as published by
-;;; the Free Software Foundation; either version 3, or (at your option)
-;;; any later version.
-;;; 
-;;; GNU Radio is distributed in the hope that it will be useful,
-;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;;; GNU General Public License for more details.
-;;; 
-;;; You should have received a copy of the GNU General Public License
-;;; along with GNU Radio; see the file COPYING.  If not, write to
-;;; the Free Software Foundation, Inc., 51 Franklin Street,
-;;; Boston, MA 02110-1301, USA.
-;;;
-	
-;;; USB Descriptor table for the B100
-;;; 
-;;; We're a high-speed only device (480 Mb/sec) with 1 configuration
-;;; and 5 interfaces.  
-;;; 
-;;;	interface 0:	command and status (ep0 COMMAND)
-;;;	interface 1:	Transmit path (ep2 OUT BULK)
-;;;	interface 2:	Receive path (ep6 IN BULK)
-
-;;; interface 3:  Command transmit path (ep4 OUT BULK) for FPGA comms
-;;; interface 4:  Command receive path (ep8 IN BULK) for FPGA comms
-
-	.module usb_descriptors
-	
-	VID_FREE	 = 0x2500	; Ettus Research, LLC.
-	PID_USRP	 = 0x0002	; B100
-
-	;; We distinguish configured from unconfigured USRPs using the Device ID.
-	;; If the MSB of the DID is 0, the device is unconfigured.
-	;; The LSB of the DID is reserved for hardware revs.
-	
-	DID_USRP	 = 0x0100	; Device ID (bcd)
-
-	
-	DSCR_DEVICE	 =   1	; Descriptor type: Device
-	DSCR_CONFIG	 =   2	; Descriptor type: Configuration
-	DSCR_STRING	 =   3	; Descriptor type: String
-	DSCR_INTRFC	 =   4	; Descriptor type: Interface
-	DSCR_ENDPNT	 =   5	; Descriptor type: Endpoint
-	DSCR_DEVQUAL	 =   6	; Descriptor type: Device Qualifier
-	
-	DSCR_DEVICE_LEN	 =  18
-	DSCR_CONFIG_LEN  =   9
-	DSCR_INTRFC_LEN  =   9
-	DSCR_ENDPNT_LEN  =   7
-	DSCR_DEVQUAL_LEN =  10
-	
-	ET_CONTROL	 =   0	; Endpoint type: Control
-	ET_ISO		 =   1	; Endpoint type: Isochronous
-	ET_BULK		 =   2	; Endpoint type: Bulk
-	ET_INT		 =   3	; Endpoint type: Interrupt
-	
-	
-	;; configuration attributes
-	bmSELF_POWERED	=	1 << 6
-
-;;; --------------------------------------------------------
-;;;	external ram data
-;;;--------------------------------------------------------
-	
-	.area USBDESCSEG    (XDATA)
-	
-;;; ----------------------------------------------------------------
-;;; descriptors used when operating at high speed (480Mb/sec)
-;;; ----------------------------------------------------------------
-	
-	.even	; descriptors must be 2-byte aligned for SUDPTR{H,L} to work
-
-	;; The .even directive isn't really honored by the linker.  Bummer!
-	;; (There's no way to specify an alignment requirement for a given area,
-	;; hence when they're concatenated together, even doesn't work.)
-	;; 
-	;; We work around this by telling the linker to put USBDESCSEG
-	;; at 0xE000 absolute.  This means that the maximimum length of this
-	;; segment is 480 bytes, leaving room for the two hash slots 
-	;; at 0xE1EO to 0xE1FF.  
-	;; 
-	;; As of July 7, 2004, this segment is 326 bytes long
-  ;; As of Sept 2, 2010, this segment is 416 bytes long
-	
-_high_speed_device_descr::
-	.db	DSCR_DEVICE_LEN
-	.db	DSCR_DEVICE
-	.db	<0x0200		; Specification version (LSB)
-	.db	>0x0200		; Specification version (MSB)
-	.db	0xff		; device class (vendor specific)
-	.db	0xff		; device subclass (vendor specific)
-	.db	0xff		; device protocol (vendor specific)
-	.db	64		; bMaxPacketSize0 for endpoint 0
-	.db	<VID_FREE	; idVendor
-	.db	>VID_FREE	; idVendor
-	.db	<PID_USRP	; idProduct
-	.db	>PID_USRP	; idProduct
-_usb_desc_hw_rev_binary_patch_location_0::
-	.db	<DID_USRP	; bcdDevice
-	.db	>DID_USRP	; bcdDevice
-	.db	SI_VENDOR	; iManufacturer (string index)
-	.db	SI_PRODUCT	; iProduct (string index)
-	.db	SI_SERIAL	; iSerial number (string index)
-	.db	1		; bNumConfigurations
-	
-;;; describes the other speed (12Mb/sec)
-	.even
-_high_speed_devqual_descr::
-	.db	DSCR_DEVQUAL_LEN
-	.db	DSCR_DEVQUAL
-	.db	<0x0200		; bcdUSB (LSB)
-	.db	>0x0200		; bcdUSB (MSB)
-	.db	0xff		; bDeviceClass
-	.db	0xff		; bDeviceSubClass
-	.db	0xff		; bDeviceProtocol
-	.db	64		; bMaxPacketSize0
-	.db	1		; bNumConfigurations (one config at 12Mb/sec)
-	.db	0		; bReserved
-	
-	.even
-_high_speed_config_descr::	
-	.db	DSCR_CONFIG_LEN
-	.db	DSCR_CONFIG
-	.db	<(_high_speed_config_descr_end - _high_speed_config_descr) ; LSB
-	.db	>(_high_speed_config_descr_end - _high_speed_config_descr) ; MSB
-	.db	5		; bNumInterfaces
-	.db	1		; bConfigurationValue
-	.db	0		; iConfiguration
-	.db	0x80 | bmSELF_POWERED ; bmAttributes
-	.db	0		; bMaxPower
-
-	;; interface descriptor 0 (command & status, ep0 COMMAND)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	0		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	0		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
-
-	;; interface descriptor 1 (transmit path, ep2 OUT BULK)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	1		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	1		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_TX_PATH	; iInterface (description)
-
-	;; interface 1's end point
-
-	.db	DSCR_ENDPNT_LEN
-	.db	DSCR_ENDPNT
-	.db	0x02		; bEndpointAddress (ep 2 OUT)
-	.db	ET_BULK		; bmAttributes
-	.db	<512		; wMaxPacketSize (LSB)
-	.db	>512		; wMaxPacketSize (MSB)
-	.db	0		; bInterval (iso only)
-
-	;; interface descriptor 2 (receive path, ep6 IN BULK)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	2		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	1		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_RX_PATH	; iInterface (description)
-
-	;; interface 2's end point
-
-	.db	DSCR_ENDPNT_LEN
-	.db	DSCR_ENDPNT
-	.db	0x86		; bEndpointAddress (ep 6 IN)
-	.db	ET_BULK		; bmAttributes
-	.db	<512		; wMaxPacketSize (LSB)
-	.db	>512		; wMaxPacketSize (MSB)
-	.db	0		; bInterval (iso only)
-
-	;; interface descriptor 3 (FPGA command OUT path, ep4 OUT BULK)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	3		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	1		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_FPGA_COMMAND_OUT_PATH	; iInterface (description)
-
-	;; interface 3's end point
-
-	.db	DSCR_ENDPNT_LEN
-	.db	DSCR_ENDPNT
-	.db	0x04		; bEndpointAddress (ep 4 OUT)
-	.db	ET_BULK		; bmAttributes
-	.db	<32		; wMaxPacketSize (LSB)
-	.db	>32		; wMaxPacketSize (MSB)
-	.db	0		; bInterval (iso only)
-
-	;; interface descriptor 4 (FPGA command IN path, ep8 IN BULK)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	4		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	1		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_FPGA_COMMAND_IN_PATH	; iInterface (description)
-
-	;; interface 4's end point
-
-	.db	DSCR_ENDPNT_LEN
-	.db	DSCR_ENDPNT
-	.db	0x88		; bEndpointAddress (ep 8 IN)
-	.db	ET_BULK		; bmAttributes
-	.db	<32		; wMaxPacketSize (LSB)
-	.db	>32		; wMaxPacketSize (MSB)
-	.db	0		; bInterval (iso only)
-
-
-_high_speed_config_descr_end:		
-
-;;; ----------------------------------------------------------------
-;;; descriptors used when operating at full speed (12Mb/sec)
-;;; ----------------------------------------------------------------
-
-	.even
-_full_speed_device_descr::	
-	.db	DSCR_DEVICE_LEN
-	.db	DSCR_DEVICE
-	.db	<0x0200		; Specification version (LSB)
-	.db	>0x0200		; Specification version (MSB)
-	.db	0xff		; device class (vendor specific)
-	.db	0xff		; device subclass (vendor specific)
-	.db	0xff		; device protocol (vendor specific)
-	.db	64		; bMaxPacketSize0 for endpoint 0
-	.db	<VID_FREE	; idVendor
-	.db	>VID_FREE	; idVendor
-	.db	<PID_USRP	; idProduct
-	.db	>PID_USRP	; idProduct
-_usb_desc_hw_rev_binary_patch_location_1::
-	.db	<DID_USRP	; bcdDevice
-	.db	>DID_USRP	; bcdDevice
-	.db	SI_VENDOR	; iManufacturer (string index)
-	.db	SI_PRODUCT	; iProduct (string index)
-	.db	SI_NONE		; iSerial number (None)
-	.db	1		; bNumConfigurations
-	
-	
-;;; describes the other speed (480Mb/sec)
-	.even
-_full_speed_devqual_descr::
-	.db	DSCR_DEVQUAL_LEN
-	.db	DSCR_DEVQUAL
-	.db	<0x0200		; bcdUSB
-	.db	>0x0200		; bcdUSB
-	.db	0xff		; bDeviceClass
-	.db	0xff		; bDeviceSubClass
-	.db	0xff		; bDeviceProtocol
-	.db	64		; bMaxPacketSize0
-	.db	1		; bNumConfigurations (one config at 480Mb/sec)
-	.db	0		; bReserved
-	
-	.even
-_full_speed_config_descr::	
-	.db	DSCR_CONFIG_LEN
-	.db	DSCR_CONFIG
-	.db	<(_full_speed_config_descr_end - _full_speed_config_descr) ; LSB
-	.db	>(_full_speed_config_descr_end - _full_speed_config_descr) ; MSB
-	.db	1		; bNumInterfaces
-	.db	1		; bConfigurationValue
-	.db	0		; iConfiguration
-	.db	0x80 | bmSELF_POWERED ; bmAttributes
-	.db	0		; bMaxPower
-
-	;; interface descriptor 0 (command & status, ep0 COMMAND)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	0		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	0		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
-	
-_full_speed_config_descr_end:	
-	
-;;; ----------------------------------------------------------------
-;;;			string descriptors
-;;; ----------------------------------------------------------------
-
-_nstring_descriptors::
-	.db	(_string_descriptors_end - _string_descriptors) / 2
-
-_string_descriptors::
-	.db	<str0, >str0
-	.db	<str1, >str1
-	.db	<str2, >str2
-	.db	<str3, >str3
-	.db	<str4, >str4
-	.db	<str5, >str5
-	.db	<str6, >str6
-	.db <str7, >str7
-	.db <str8, >str8
-_string_descriptors_end:
-
-	SI_NONE = 0
-	;; str0 contains the language ID's.
-	.even
-str0:	.db	str0_end - str0
-	.db	DSCR_STRING
-	.db	0
-	.db	0
-	.db	<0x0409		; magic code for US English (LSB)
-	.db	>0x0409		; magic code for US English (MSB)
-str0_end:
-
-	SI_VENDOR = 1
-	.even
-str1:	.db	str1_end - str1
-	.db	DSCR_STRING
-	.db	'F, 0		; 16-bit unicode
-	.db	'r, 0
-	.db	'e, 0
-	.db	'e, 0
-	.db	' , 0
-	.db	'S, 0
-	.db	'o, 0
-	.db	'f, 0
-	.db	't, 0
-	.db	'w, 0
-	.db	'a, 0
-	.db	'r, 0
-	.db	'e, 0
-	.db	' , 0
-	.db	'F, 0
-	.db	'o, 0
-	.db	'l, 0
-	.db	'k, 0
-	.db	's, 0
-str1_end:
-
-	SI_PRODUCT = 2
-	.even
-str2:	.db	str2_end - str2
-	.db	DSCR_STRING
-	.db	'U, 0
-	.db	'S, 0
-	.db	'R, 0
-	.db	'P, 0
-	.db '1, 0
-	.db 'P, 0
-	.db	' , 0
-	.db	'R, 0
-	.db	'e, 0
-	.db	'v, 0
-	.db	' , 0
-_usb_desc_hw_rev_ascii_patch_location_0::
-	.db	'?, 0
-str2_end:
-
-	SI_COMMAND_AND_STATUS = 3
-	.even
-str3:	.db	str3_end - str3
-	.db	DSCR_STRING
-	.db	'C, 0
-	.db	'o, 0
-	.db	'm, 0
-	.db	'm, 0
-	.db	'a, 0
-	.db	'n, 0
-	.db	'd, 0
-	.db	' , 0
-	.db	'&, 0
-	.db	' , 0
-	.db	'S, 0
-	.db	't, 0
-	.db	'a, 0
-	.db	't, 0
-	.db	'u, 0
-	.db	's, 0
-str3_end:
-
-	SI_TX_PATH = 4
-	.even
-str4:	.db	str4_end - str4
-	.db	DSCR_STRING
-	.db	'T, 0
-	.db	'r, 0
-	.db	'a, 0
-	.db	'n, 0
-	.db	's, 0
-	.db	'm, 0
-	.db	'i, 0
-	.db	't, 0
-	.db	' , 0
-	.db	'P, 0
-	.db	'a, 0
-	.db	't, 0
-	.db	'h, 0
-str4_end:
-
-	SI_RX_PATH = 5
-	.even
-str5:	.db	str5_end - str5
-	.db	DSCR_STRING
-	.db	'R, 0
-	.db	'e, 0
-	.db	'c, 0
-	.db	'e, 0
-	.db	'i, 0
-	.db	'v, 0
-	.db	'e, 0
-	.db	' , 0
-	.db	'P, 0
-	.db	'a, 0
-	.db	't, 0
-	.db	'h, 0
-str5_end:
-
-	SI_SERIAL = 6
-	.even
-str6:	.db	str6_end - str6
-	.db	DSCR_STRING
-_usb_desc_serial_number_ascii::
-	.db	'3, 0
-	.db	'., 0
-	.db	'1, 0
-	.db	'4, 0
-	.db	'1, 0
-	.db	'5, 0
-	.db	'9, 0
-	.db	'2, 0
-	.db	'7, 0
-str6_end:
-
-	SI_FPGA_COMMAND_OUT_PATH = 7
-	.even
-str7:	.db	str7_end - str7
-	.db	DSCR_STRING
-	.db	'F, 0
-	.db	'P, 0
-	.db	'G, 0
-	.db	'A, 0
-	.db	' , 0
-	.db	'C, 0
-	.db	'o, 0
-	.db	'm, 0
-	.db	'm, 0
-	.db	'a, 0
-	.db	'n, 0
-	.db	'd, 0
-	.db	' , 0
-	.db	'O, 0
-	.db	'u, 0
-	.db	't, 0
-str7_end:
-
-	SI_FPGA_COMMAND_IN_PATH = 8
-	.even
-str8:	.db	str8_end - str8
-	.db	DSCR_STRING
-	.db	'F, 0
-	.db	'P, 0
-	.db	'G, 0
-	.db	'A, 0
-	.db	' , 0
-	.db	'C, 0
-	.db	'o, 0
-	.db	'm, 0
-	.db	'm, 0
-	.db	'a, 0
-	.db	'n, 0
-	.db	'd, 0
-	.db	' , 0
-	.db	'I, 0
-	.db	'n, 0
-str8_end:

firmware/fx2/b100/usrp_common.c

@@ -1,108 +0,0 @@
-/*
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-/* 
- * common code for USRP
- */
-
-#include "usrp_common.h"
-
-void init_board (void);
-
-void
-init_usrp (void)
-{
-  CPUCS = bmCLKSPD1;	// CPU runs @ 48 MHz
-  CKCON = 0;		// MOVX takes 2 cycles
-
-  // IFCLK is generated internally and runs at 48 MHz; GPIF "master mode"
-
-  IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE | bmIFCLKPOL | bmIFGPIF;
-  SYNCDELAY;
-
-  // configure IO ports (B and D are used by GPIF)
-
-  IOA = bmPORT_A_INITIAL;	// Port A initial state
-  OEA = bmPORT_A_OUTPUTS;	// Port A direction register
-
-  IOC = bmPORT_C_INITIAL;	// Port C initial state
-  OEC = bmPORT_C_OUTPUTS;	// Port C direction register
-
-  IOE = bmPORT_E_INITIAL;	// Port E initial state
-  OEE = bmPORT_E_OUTPUTS;	// Port E direction register
-
-
-  //REVCTL = bmDYN_OUT | bmENH_PKT;			// highly recommended by docs
-  // SYNCDELAY;
-  
-  // configure end points
-
-  EP1OUTCFG = bmVALID | bmBULK;				SYNCDELAY;
-  EP1INCFG  = bmVALID | bmBULK | bmIN;			SYNCDELAY;
-
-  EP2CFG    = bmVALID | bmBULK | bmDOUBLEBUF;		SYNCDELAY;	// 512 dbl bulk OUT
-  EP4CFG    = bmVALID | bmBULK | bmDOUBLEBUF;		SYNCDELAY;	// 512 dbl bulk OUT
-  EP6CFG    = bmVALID | bmBULK | bmDOUBLEBUF | bmIN;	SYNCDELAY;	// 512 dbl bulk IN
-  EP8CFG    = bmVALID | bmBULK | bmDOUBLEBUF | bmIN;	SYNCDELAY;	// 512 dbl bulk IN
-
-  // reset FIFOs
-
-  FIFORESET = bmNAKALL;					SYNCDELAY;
-  FIFORESET = 2;					SYNCDELAY;
-  FIFORESET = 4;					SYNCDELAY;
-  FIFORESET = 6;					SYNCDELAY;
-  FIFORESET = 8;					SYNCDELAY;
-  FIFORESET = 0;					SYNCDELAY;
-  
-  // configure end point FIFOs
-
-  // let core see 0 to 1 transistion of autoout bit
-
-  EP2FIFOCFG =             bmWORDWIDE;			SYNCDELAY;
-  EP2FIFOCFG = bmAUTOOUT | bmWORDWIDE;			SYNCDELAY;
-  EP6FIFOCFG = bmZEROLENIN | bmWORDWIDE;			SYNCDELAY;
-  //EP6FIFOCFG = bmWORDWIDE;			SYNCDELAY;
-  EP4FIFOCFG =             bmWORDWIDE;      SYNCDELAY;
-  EP4FIFOCFG = bmAUTOOUT | bmWORDWIDE;      SYNCDELAY;
-  EP8FIFOCFG = bmAUTOIN  | bmWORDWIDE;      SYNCDELAY;
-
-  EP0BCH = 0;			SYNCDELAY;
-
-  // arm EP1OUT so we can receive "out" packets (TRM pg 8-8)
-
-  EP1OUTBC = 0;			SYNCDELAY;
-
-  EP2GPIFFLGSEL = 0x00;		SYNCDELAY; // For EP2OUT, GPIF uses EF flag
-  EP6GPIFFLGSEL = 0x00;		SYNCDELAY; // For EP6IN,  GPIF uses FF flag
-  EP4GPIFFLGSEL = 0x00;   SYNCDELAY;
-  EP8GPIFFLGSEL = 0x00;   SYNCDELAY;
-
-  // set autoin length for EP6
-  // FIXME should be f(enumeration)
-
-  EP6AUTOINLENH = (512) >> 8;	SYNCDELAY;  // this is the length for high speed
-  EP6AUTOINLENL = (512) & 0xff; SYNCDELAY;
-
-  EP8AUTOINLENH = (32) >> 8; SYNCDELAY;
-  EP8AUTOINLENL = (32) & 0xff; SYNCDELAY;
-
-  init_board ();
-}
-

firmware/fx2/b100/usrp_main.c

@@ -1,394 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003,2004 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-#include "usrp_commands.h"
-#include "fpga.h"
-#include "usrp_gpif_inline.h"
-#include "timer.h"
-#include "i2c.h"
-#include "isr.h"
-#include "usb_common.h"
-#include "fx2utils.h"
-#include "usrp_globals.h"
-#include "usrp_i2c_addr.h"
-#include <string.h>
-#include "eeprom_io.h"
-#include "usb_descriptors.h"
-
-/*
- * offsets into boot eeprom for configuration values
- */
-#define	HW_REV_OFFSET		  5
-#define SERIAL_NO_OFFSET	247
-#define SERIAL_NO_LEN		  9
-
-
-#define	bRequestType	SETUPDAT[0]
-#define	bRequest	SETUPDAT[1]
-#define	wValueL		SETUPDAT[2]
-#define	wValueH		SETUPDAT[3]
-#define	wIndexL		SETUPDAT[4]
-#define	wIndexH		SETUPDAT[5]
-#define	wLengthL	SETUPDAT[6]
-#define	wLengthH	SETUPDAT[7]
-
-
-unsigned char g_tx_enable = 0;
-unsigned char g_rx_enable = 0;
-unsigned char g_rx_overrun = 0;
-unsigned char g_tx_underrun = 0;
-bit enable_gpif = 0;
-
-/*
- * the host side fpga loader code pushes an MD5 hash of the bitstream
- * into hash1.
- */
-#define	  USRP_HASH_SIZE      16
-xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
-
-void clear_fpga_data_fifo(void);
-
-static void
-get_ep0_data (void)
-{
-  EP0BCL = 0;			// arm EP0 for OUT xfer.  This sets the busy bit
-
-  while (EP0CS & bmEPBUSY)	// wait for busy to clear
-    ;
-}
-
-static void initialize_gpif_buffer(int ep) {
-  //clear the GPIF buffers on startup to keep crap out of the data path
-  FIFORESET = 0x80; SYNCDELAY; //activate NAKALL
-  FIFORESET = ep; SYNCDELAY;
-  FIFORESET = 0x00; SYNCDELAY;
-}
-
-/*
- * Handle our "Vendor Extension" commands on endpoint 0.
- * If we handle this one, return non-zero.
- */
-unsigned char
-app_vendor_cmd (void)
-{
-  if (bRequestType == VRT_VENDOR_IN){
-
-    /////////////////////////////////
-    //    handle the IN requests
-    /////////////////////////////////
-
-    switch (bRequest){
-
-    case VRQ_GET_STATUS: //this is no longer done via FX2 -- the FPGA will be queried instead
-      return 0;
-      break;
-
-    case VRQ_I2C_READ:
-      if (!i2c_read (wValueL, EP0BUF, wLengthL)) return 0;
-        EP0BCH = 0;
-        EP0BCL = wLengthL;
-        break;
-      
-    case VRQ_SPI_READ:
-      return 0;
-
-    case VRQ_FW_COMPAT:
-        EP0BCH = 0;
-        EP0BCL = 2;
-        break;
-
-    default:
-      return 0;
-    }
-  }
-
-  else if (bRequestType == VRT_VENDOR_OUT){
-
-    /////////////////////////////////
-    //    handle the OUT requests
-    /////////////////////////////////
-
-    switch (bRequest){
-
-    case VRQ_SET_LED:
-      switch (wIndexL){
-      case 0:
-        set_led_0 (wValueL);
-        break;
-	
-      case 1:
-        set_led_1 (wValueL);
-        break;
-	
-      default:
-        return 0;
-      }
-      break;
-      
-    case VRQ_FPGA_LOAD:
-      switch (wIndexL){			// sub-command
-      case FL_BEGIN:
-        return fpga_load_begin ();
-	
-      case FL_XFER:
-        get_ep0_data ();
-        return fpga_load_xfer (EP0BUF, EP0BCL);
-	
-      case FL_END:
-        return fpga_load_end ();
-	
-      default:
-        return 0;
-      }
-      break;
-
-    case VRQ_FPGA_SET_RESET:
-      //fpga_set_reset (wValueL);
-      break;
-
-    case VRQ_I2C_WRITE:
-      get_ep0_data ();
-      if (!i2c_write (wValueL, EP0BUF, EP0BCL)) return 0;
-      //USRP_LED_REG ^= bmLED1;
-      break;
-      
-    case VRQ_RESET_GPIF:
-      initialize_gpif_buffer(wValueL);
-      break;
-      
-    case VRQ_ENABLE_GPIF:
-      enable_gpif = (wValueL != 0) ? 1 : 0;
-      set_led_1(enable_gpif);
-      break;
-    
-    case VRQ_CLEAR_FPGA_FIFO:
-        clear_fpga_data_fifo();
-        break;
-
-    default:
-      return 0;
-    }
-
-  }
-  else
-    return 0;    // invalid bRequestType
-
-  return 1;
-}
-
-static int short_pkt_state = 0;
-#define SHORT_PACKET_DETECTED (short_pkt_state != bitSHORT_PACKET_SIGNAL)
-
-//yes, this is a little opaque
-//basically this is necessary because while all the logic to inform the FPGA
-//of what we're trying to do via the CTL pins is contained within the flowstates,
-//we need to assert the endpoint select pin one clock cycle before the flowstate starts.
-//this is the job of the wave descriptor. rather than switch between waves, since that
-//involves a little more setup, we just modify the wave table on the fly.
-inline static void setup_wave_data_read(void) {
-    GPIF_WAVE_DATA[80] = 0x06;
-    GPIF_WAVE_DATA[81] = 0x06;
-}
-
-inline static void setup_wave_ctrl_read(void) {
-    GPIF_WAVE_DATA[80] = 0x0E;
-    GPIF_WAVE_DATA[81] = 0x0E;
-}
-
-inline static void setup_wave_data_write(void) {
-    GPIF_WAVE_DATA[112] = 0x00;
-    GPIF_WAVE_DATA[113] = 0x00;
-}
-
-inline static void setup_wave_ctrl_write(void) {
-    GPIF_WAVE_DATA[112] = 0x08;
-    GPIF_WAVE_DATA[113] = 0x08;
-}
-
-inline static void handle_data_write(void) {
-    GPIFTCB1 = 0x01;	//SYNCDELAY;
-    GPIFTCB0 = 0x00;
-    setup_flowstate_data_write ();
-    setup_wave_data_write();
-    GPIFTRIG = bmGPIF_EP2_START | bmGPIF_WRITE; 	// start the xfer
-    SYNCDELAY;
-    while (!(GPIFTRIG & bmGPIF_IDLE));
-}
-
-inline static void handle_ctrl_write(void) {
-    GPIFTCB1 = 0x00;
-    GPIFTCB0 = 0x10;
-    setup_flowstate_ctrl_write ();
-    setup_wave_ctrl_write();
-    GPIFTRIG = bmGPIF_EP4_START | bmGPIF_WRITE; 	// start the xfer
-    SYNCDELAY;
-    while (!(GPIFTRIG & bmGPIF_IDLE));
-}
-
-inline static void handle_data_read(void) {
-    GPIFTCB1 = 0x01;
-    GPIFTCB0 = 0x00;
-    setup_flowstate_data_read ();
-    setup_wave_data_read();
-    short_pkt_state = bitSHORT_PACKET_SIGNAL;
-    GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; 	// start the xfer
-    SYNCDELAY;
-    while (!(GPIFTRIG & bmGPIF_IDLE));
-    INPKTEND = 0x06;	// tell USB we filled buffer (6 is our endpoint num)
-    SYNCDELAY;
-    if(SHORT_PACKET_DETECTED) {
-        while(!(EP6CS & bmEPEMPTY)); //wait for packet to send
-        INPKTEND = 0x06; //send a ZLP
-        //toggle_led_1(); //FIXME DEBUG
-    }
-}
-
-inline static void handle_ctrl_read(void) {
-    GPIFTCB1 = 0x00;
-    GPIFTCB0 = 0x10;
-    setup_flowstate_ctrl_read ();
-    setup_wave_ctrl_read();
-    GPIFTRIG = bmGPIF_EP8_START | bmGPIF_READ; 	// start the xfer
-    SYNCDELAY;
-    while (!(GPIFTRIG & bmGPIF_IDLE));
-    INPKTEND = 8;	// tell USB we filled buffer (8 is our endpoint num)
-}
-
-//clear the FPGA datapath by reading but not submitting, instead clearing the FIFO after each transaction
-void clear_fpga_data_fifo(void) {
-    while(fpga_has_data_packet_avail()) {
-        GPIFTCB1 = 0x01;
-        GPIFTCB0 = 0x00;
-        setup_flowstate_data_read ();
-        setup_wave_data_read();
-        GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; 	// start the xfer
-        SYNCDELAY;
-        while (!(GPIFTRIG & bmGPIF_IDLE));
-        initialize_gpif_buffer(6); //reset the FIFO instead of committing it
-    }
-}
-
-static void
-main_loop (void)
-{
-  while (1){
-    if (usb_setup_packet_avail ())
-      usb_handle_setup_packet ();
-
-    if(enable_gpif){
-        if  (fx2_has_ctrl_packet_avail()    && fpga_has_room_for_ctrl_packet()) handle_ctrl_write();
-        if  (fx2_has_room_for_ctrl_packet() && fpga_has_ctrl_packet_avail())    handle_ctrl_read();
-        
-        //we do this
-        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
-        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
-        //five times so that
-        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
-        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
-        //we can piggyback
-        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
-        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
-        //data transfers
-        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
-        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
-        //without loop overhead
-        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
-        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
-    }
-  }
-}
-
-/*
- * called at 100 Hz from timer2 interrupt
- *
- * Toggle led 0
- */
-void
-isr_tick (void) interrupt
-{
-  static unsigned char	count = 1;
-  
-  if (--count == 0){
-    count = 50;
-    USRP_LED_REG ^= bmLED0;
-  }
-
-  clear_timer_irq ();
-}
-
-/*
- * Read h/w rev code and serial number out of boot eeprom and
- * patch the usb descriptors with the values.
- */
-void
-patch_usb_descriptors(void)
-{
-  static xdata unsigned char hw_rev;
-  static xdata unsigned char serial_no[SERIAL_NO_LEN];
-  unsigned char i;
-
-  eeprom_read(I2C_ADDR_BOOT, HW_REV_OFFSET, &hw_rev, 1);	// LSB of device id
-  usb_desc_hw_rev_binary_patch_location_0[0] = hw_rev;
-  usb_desc_hw_rev_binary_patch_location_1[0] = hw_rev;
-  usb_desc_hw_rev_ascii_patch_location_0[0] = hw_rev + '0';     // FIXME if we get > 9
-
-  eeprom_read(I2C_ADDR_BOOT, SERIAL_NO_OFFSET, serial_no, SERIAL_NO_LEN);
-
-  for (i = 0; i < SERIAL_NO_LEN; i++){
-    unsigned char ch = serial_no[i];
-    if (ch == 0xff)	// make unprogrammed EEPROM default to '0'
-      ch = '0';
-    usb_desc_serial_number_ascii[i << 1] = ch;
-  }
-}
-
-void
-main (void)
-{
-  enable_gpif = 0;
-
-  memset (hash1, 0, USRP_HASH_SIZE);	// zero fpga bitstream hash.  This forces reload
-  
-  init_usrp ();
-  init_gpif ();
-  
-  // if (UC_START_WITH_GSTATE_OUTPUT_ENABLED)
-  //IFCONFIG |= bmGSTATE;			// no conflict, start with it on
-
-  set_led_0 (0);
-  set_led_1 (0);
-  
-  EA = 0;		// disable all interrupts
-
-  patch_usb_descriptors();
-
-  setup_autovectors ();
-  usb_install_handlers ();
-  //hook_timer_tick ((unsigned short) isr_tick);
-
-  EIEX4 = 1;		// disable INT4 FIXME
-  EA = 1;		// global interrupt enable
-
-  fx2_renumerate ();	// simulates disconnect / reconnect
-
-  setup_flowstate_common();
-  main_loop ();
-}

firmware/fx2/b100/usrp_regs.h

@@ -1,130 +0,0 @@
-/*
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-/*
- * These are the register definitions for the Rev 1 USRP prototype
- * The Rev 1 is the version with the AD9862's and daughterboards
- */
-
-#ifndef _B100_REGS_H_
-#define _B100_REGS_H_
-
-#include "fx2regs.h"
-
-/*
- * Port A (bit addressable):
- */
-
-#define USRP_PA			IOA		// Port A
-#define	USRP_PA_OE		OEA		// Port A direction register
-
-#define	USRP_ALTERA_CONFIG	USRP_PA   // Now on port A, not C
-
-#define bmALTERA_DCLK		bmBIT0
-#define bmALTERA_NCONFIG	bmBIT1
-#define bmALTERA_DATA0		bmBIT3
-#define bmALTERA_NSTATUS	bmBIT4
-#define bmRESET_FPGA_FIFOS  bmBIT7
-
-
-#define	bmALTERA_BITS		(bmALTERA_DCLK			\
-				 | bmALTERA_NCONFIG		\
-				 | bmALTERA_DATA0		\
-				 | bmALTERA_NSTATUS		\
-				)
-
-
-#define	bmPORT_A_OUTPUTS	(bmALTERA_DCLK			\
-			 	 | bmALTERA_NCONFIG		\
-				 | bmALTERA_DATA0		\
-				)
-
-#define	bmPORT_A_INITIAL	0
-
-#define PORT_A_ADDR 0x80
-#define PORT_C_ADDR 0xA0
-
-sbit at PORT_A_ADDR+0 bitALTERA_DCLK;	// 0x80 is the bit address of PORT A
-sbit at PORT_A_ADDR+1 bitALTERA_NCONFIG;
-sbit at PORT_A_ADDR+3 bitALTERA_DATA0;
-sbit at PORT_A_ADDR+6 bitSHORT_PACKET_SIGNAL;
-
-sbit at PORT_C_ADDR+7 bitALTERA_CONF_DONE;
-
-
-/* Port B: GPIF	FD[7:0]			*/
-
-/*
- * Port C (bit addressable):
- *    5:1 FPGA configuration
- */
-
-#define	USRP_PC			IOC		// Port C
-#define	USRP_PC_OE		OEC		// Port C direction register
-
-#define	bmPC_nRESET		0 //bmBIT0		// reset line to codecs (active low)
-#define	bmPC_LED0		bmBIT0		// active low
-#define	bmPC_LED1		bmBIT1		// active low
-
-#define	bmPORT_C_OUTPUTS	(bmPC_LED0 | bmPC_LED1)
-#define	bmPORT_C_INITIAL	(bmPC_LED0 | bmPC_LED1)
-
-
-#define	USRP_LED_REG		USRP_PC
-#define	bmLED0			bmPC_LED0
-#define	bmLED1			bmPC_LED1
-
-
-/* Port D: GPIF	FD[15:8]		*/
-
-/* Port E: not bit addressible		*/
-
-#define	USRP_PE			IOE		// Port E
-#define	USRP_PE_OE		OEE		// Port E direction register
-
-#define	bmPORT_E_OUTPUTS	(0)
-#define	bmPORT_E_INITIAL	(0)
-
-/*
- * FPGA output lines that are tied to FX2 RDYx inputs.
- * These are readable using GPIFREADYSTAT.
- */
-//#define	bmFPGA_HAS_SPACE		bmBIT0	// usbrdy[0] has room for 512 byte packet
-//#define	bmFPGA_PKT_AVAIL		bmBIT1	// usbrdy[1] has >= 512 bytes available
-
-#define bmDATA_EMPTY            bmBIT0 //data output FIFO has no data ready
-#define bmDATA_FIFO_FULL        bmBIT1 //data input FIFO is full
-#define bmCTRL_EMPTY            bmBIT2 //control output FIFO has no data ready
-#define bmCTRL_FIFO_FULL        bmBIT3 //control input FIFO is full
-
-// #define	bmTX_UNDERRUN			bmBIT2  // usbrdy[2] D/A ran out of data
-// #define	bmRX_OVERRUN			bmBIT3	// usbrdy[3] A/D ran out of buffer
-
-/*
- * FPGA input lines that are tied to the FX2 CTLx outputs.
- *
- * These are controlled by the GPIF microprogram...
- */
-// WE					bmBIT0	// usbctl[0] write enable
-// RE					bmBIT1	// usbctl[1] read enable
-// OE					bmBIT2	// usbctl[2] output enable
-// EP                   bmBIT3  // usbctl[3] endpoint select (data/ctrl)
-
-#endif /* _USRP_REV1_REGS_H_ */

firmware/fx2/common/.gitignore

@@ -1,18 +0,0 @@
-/*.ihx
-/*.lnk
-/*.lst
-/*.map
-/*.mem
-/*.rel
-/*.rst
-/*.sym
-/blink_leds.asm
-/usrp_common.asm
-/command_loop.asm
-/fpga.asm
-/*.asm
-/usrp_gpif.c
-/usrp_gpif_inline.h
-/*.lib
-/Makefile
-/Makefile.in

firmware/fx2/common/_startup.a51

@@ -1,80 +0,0 @@
-;;; -*- asm -*-
-;;;
-;;; Copyright 2003,2004 Free Software Foundation, Inc.
-;;; 
-;;; This file is part of GNU Radio
-;;; 
-;;; GNU Radio is free software; you can redistribute it and/or modify
-;;; it under the terms of the GNU General Public License as published by
-;;; the Free Software Foundation; either version 3, or (at your option)
-;;; any later version.
-;;; 
-;;; GNU Radio is distributed in the hope that it will be useful,
-;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;;; GNU General Public License for more details.
-;;; 
-;;; You should have received a copy of the GNU General Public License
-;;; along with GNU Radio; see the file COPYING.  If not, write to
-;;; the Free Software Foundation, Inc., 51 Franklin Street,
-;;; Boston, MA 02110-1301, USA.
-
-    
-;;; The default external memory initialization provided by sdcc is not
-;;; appropriate to the FX2.  This is derived from the sdcc code, but uses 
-;;; the FX2 specific _MPAGE sfr.
-
-
-	;; .area XISEG   (XDATA)  ; the initialized external data area
-	;; .area XINIT   (CODE)	  ; the code space consts to init XISEG
-	.area XSEG    (XDATA)	  ; zero initialized xdata
-	.area USBDESCSEG (XDATA)  ; usb descriptors
-
-	
-	.area CSEG    (CODE)
-
-	;; sfr that sets upper address byte of MOVX using @r0 or @r1
-	_MPAGE	=	0x0092
-
-__sdcc_external_startup::
-	;; This system is now compiled with the --no-xinit-opt 
-	;; which means that any initialized XDATA is handled
-	;; inline by code in the GSINIT segs emitted for each file.
-	;; 
-	;; We zero XSEG and all of the internal ram to ensure 
-	;; a known good state for uninitialized variables.
-
-;	_mcs51_genRAMCLEAR() start
-	mov	r0,#l_XSEG
-	mov	a,r0
-	orl	a,#(l_XSEG >> 8)
-	jz	00002$
-	mov	r1,#((l_XSEG + 255) >> 8)
-	mov	dptr,#s_XSEG
-	clr     a
-	
-00001$:	movx	@dptr,a
-	inc	dptr
-	djnz	r0,00001$
-	djnz	r1,00001$
-	
-	;; We're about to clear internal memory.  This will overwrite
-	;; the stack which contains our return address.
-	;; Pop our return address into DPH, DPL
-00002$:	pop	dph
-	pop	dpl
-	
-	;; R0 and A contain 0.  This loop will execute 256 times.
-	;; 
-	;; FWIW the first iteration writes direct address 0x00,
-	;; which is the location of r0.  We get lucky, we're 
-	;; writing the correct value (0)
-	
-00003$:	mov	@r0,a
-	djnz	r0,00003$
-
-	push	dpl		; restore our return address
-	push	dph
-
-	mov	dpl,#0		; indicate that data init is still required
-	ret

firmware/fx2/common/_startup.a51.brittle

@@ -1,78 +0,0 @@
-;;; -*- asm -*-
-;;;
-;;; Copyright 2003 Free Software Foundation, Inc.
-;;; 
-;;; This file is part of GNU Radio
-;;; 
-;;; GNU Radio is free software; you can redistribute it and/or modify
-;;; it under the terms of the GNU General Public License as published by
-;;; the Free Software Foundation; either version 3, or (at your option)
-;;; any later version.
-;;; 
-;;; GNU Radio is distributed in the hope that it will be useful,
-;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;;; GNU General Public License for more details.
-;;; 
-;;; You should have received a copy of the GNU General Public License
-;;; along with GNU Radio; see the file COPYING.  If not, write to
-;;; the Free Software Foundation, Inc., 51 Franklin Street,
-;;; Boston, MA 02110-1301, USA.
-
-    
-;;; The default external memory initialization provided by sdcc is not
-;;; appropriate to the FX2.  This is derived from the sdcc code, but uses 
-;;; the FX2 specific _MPAGE sfr.
-
-
-	.area XISEG   (XDATA)	; the initialized external data area
-	.area XINIT   (CODE)	; the code space consts to init XISEG
-	.area XSEG    (XDATA)	; zero initialized xdata
-	.area USBDESCSEG (XDATA); usb descriptors
-
-	
-	;; BIG TIME KLUDGE!
-	;; Look at usrp_main.rst and count the bytes from our
-	;; "normal return location" to the first instruction following
-	;; the comment:	"_mcs51_getRAMCLEAR () start"
-	
-	INSTRUCTION_BYTES_TO_SKIP = 0x29	 ; valid for sdcc 2.4.0 
-	
-
-	.area CSEG    (CODE)
-
-	;; sfr that sets upper address byte of MOVX using @r0 or @r1
-	_MPAGE	=	0x0092
-
-__sdcc_external_startup::
-;	_mcs51_genXINIT() start
-	mov	r1,#l_XINIT
-	mov	a,r1
-	orl	a,#(l_XINIT >> 8)
-	jz	00003$
-	mov	r2,#((l_XINIT+255) >> 8)
-	mov	dptr,#s_XINIT
-	mov	r0,#s_XISEG
-	mov	_MPAGE,#(s_XISEG >> 8)
-00001$:	clr	a
-	movc	a,@a+dptr
-	movx	@r0,a
-	inc	dptr
-	inc	r0
-	cjne	r0,#0,00002$
-	inc	_MPAGE
-00002$:	djnz	r1,00001$
-	djnz	r2,00001$
-	mov	_MPAGE,#0xFF
-00003$:
-
-	;; Danger! Total KLUDGE!
-	;; We pop the return address, add a magic number to it
-	;; then jump to that address.  Believe it or not, this
-	;; looks like the least kludgy way to handle this,
-	;; short of patching the compiler...
-
-	pop	dph
-	pop	dpl
-	mov	a,#INSTRUCTION_BYTES_TO_SKIP
-	jmp	@a+dptr

firmware/fx2/common/delay.c

@@ -1,76 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-/*
- * Delay approximately 1 microsecond (including overhead in udelay).
- */
-static void
-udelay1 (void) _naked
-{
-  _asm				; lcall that got us here took 4 bus cycles
-	ret			; 4 bus cycles
-  _endasm;
-}
-
-/*
- * delay for approximately usecs microseconds
- */
-void
-udelay (unsigned char usecs)
-{
-  do {
-    udelay1 ();
-  } while (--usecs != 0);
-}
-
-
-/*
- * Delay approximately 1 millisecond.
- * We're running at 48 MHz, so we need 48,000 clock cycles.
- *
- * Note however, that each bus cycle takes 4 clock cycles (not obvious,
- * but explains the factor of 4 problem below).
- */
-static void
-mdelay1 (void) _naked
-{
-  _asm
-	mov	dptr,#(-1200 & 0xffff)
-002$:	
-	inc	dptr		; 3 bus cycles
-	mov	a, dpl		; 2 bus cycles
-	orl	a, dph		; 2 bus cycles
-	jnz	002$		; 3 bus cycles
-
-	ret
-  _endasm;
-}
-
-void
-mdelay (unsigned int msecs)
-{
-  do {
-    mdelay1 ();
-  } while (--msecs != 0);
-}
-
-	

firmware/fx2/common/delay.h

@@ -1,38 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef _DELAY_H_
-#define _DELAY_H_
-
-/*
- * delay for approximately usecs microseconds
- * Note limit of 255 usecs.
- */
-void udelay (unsigned char usecs);
-
-/*
- * delay for approximately msecs milliseconds
- */
-void mdelay (unsigned short msecs);
-
-
-#endif /* _DELAY_H_ */

firmware/fx2/common/eeprom_boot.a51

@@ -1,573 +0,0 @@
-;--------------------------------------------------------
-; Hand tweaked minimal eeprom boot code
-;--------------------------------------------------------
-	.module eeprom_boot
-	.optsdcc -mmcs51 --model-small
-	
-;--------------------------------------------------------
-; Public variables in this module
-;--------------------------------------------------------
-	.globl _eeprom_init
-	.globl _EP8FIFOBUF
-	.globl _EP6FIFOBUF
-	.globl _EP4FIFOBUF
-	.globl _EP2FIFOBUF
-	.globl _EP1INBUF
-	.globl _EP1OUTBUF
-	.globl _EP0BUF
-	.globl _CT4
-	.globl _CT3
-	.globl _CT2
-	.globl _CT1
-	.globl _USBTEST
-	.globl _TESTCFG
-	.globl _DBUG
-	.globl _UDMACRCQUAL
-	.globl _UDMACRCL
-	.globl _UDMACRCH
-	.globl _GPIFHOLDAMOUNT
-	.globl _FLOWSTBHPERIOD
-	.globl _FLOWSTBEDGE
-	.globl _FLOWSTB
-	.globl _FLOWHOLDOFF
-	.globl _FLOWEQ1CTL
-	.globl _FLOWEQ0CTL
-	.globl _FLOWLOGIC
-	.globl _FLOWSTATE
-	.globl _GPIFABORT
-	.globl _GPIFREADYSTAT
-	.globl _GPIFREADYCFG
-	.globl _XGPIFSGLDATLNOX
-	.globl _XGPIFSGLDATLX
-	.globl _XGPIFSGLDATH
-	.globl _EP8GPIFTRIG
-	.globl _EP8GPIFPFSTOP
-	.globl _EP8GPIFFLGSEL
-	.globl _EP6GPIFTRIG
-	.globl _EP6GPIFPFSTOP
-	.globl _EP6GPIFFLGSEL
-	.globl _EP4GPIFTRIG
-	.globl _EP4GPIFPFSTOP
-	.globl _EP4GPIFFLGSEL
-	.globl _EP2GPIFTRIG
-	.globl _EP2GPIFPFSTOP
-	.globl _EP2GPIFFLGSEL
-	.globl _GPIFTCB0
-	.globl _GPIFTCB1
-	.globl _GPIFTCB2
-	.globl _GPIFTCB3
-	.globl _GPIFADRL
-	.globl _GPIFADRH
-	.globl _GPIFCTLCFG
-	.globl _GPIFIDLECTL
-	.globl _GPIFIDLECS
-	.globl _GPIFWFSELECT
-	.globl _SETUPDAT
-	.globl _SUDPTRCTL
-	.globl _SUDPTRL
-	.globl _SUDPTRH
-	.globl _EP8FIFOBCL
-	.globl _EP8FIFOBCH
-	.globl _EP6FIFOBCL
-	.globl _EP6FIFOBCH
-	.globl _EP4FIFOBCL
-	.globl _EP4FIFOBCH
-	.globl _EP2FIFOBCL
-	.globl _EP2FIFOBCH
-	.globl _EP8FIFOFLGS
-	.globl _EP6FIFOFLGS
-	.globl _EP4FIFOFLGS
-	.globl _EP2FIFOFLGS
-	.globl _EP8CS
-	.globl _EP6CS
-	.globl _EP4CS
-	.globl _EP2CS
-	.globl _EP1INCS
-	.globl _EP1OUTCS
-	.globl _EP0CS
-	.globl _EP8BCL
-	.globl _EP8BCH
-	.globl _EP6BCL
-	.globl _EP6BCH
-	.globl _EP4BCL
-	.globl _EP4BCH
-	.globl _EP2BCL
-	.globl _EP2BCH
-	.globl _EP1INBC
-	.globl _EP1OUTBC
-	.globl _EP0BCL
-	.globl _EP0BCH
-	.globl _FNADDR
-	.globl _MICROFRAME
-	.globl _USBFRAMEL
-	.globl _USBFRAMEH
-	.globl _TOGCTL
-	.globl _WAKEUPCS
-	.globl _SUSPEND
-	.globl _USBCS
-	.globl _XAUTODAT2
-	.globl _XAUTODAT1
-	.globl _I2CTL
-	.globl _I2DAT
-	.globl _I2CS
-	.globl _PORTECFG
-	.globl _PORTCCFG
-	.globl _PORTACFG
-	.globl _INTSETUP
-	.globl _INT4IVEC
-	.globl _INT2IVEC
-	.globl _CLRERRCNT
-	.globl _ERRCNTLIM
-	.globl _USBERRIRQ
-	.globl _USBERRIE
-	.globl _GPIFIRQ
-	.globl _GPIFIE
-	.globl _EPIRQ
-	.globl _EPIE
-	.globl _USBIRQ
-	.globl _USBIE
-	.globl _NAKIRQ
-	.globl _NAKIE
-	.globl _IBNIRQ
-	.globl _IBNIE
-	.globl _EP8FIFOIRQ
-	.globl _EP8FIFOIE
-	.globl _EP6FIFOIRQ
-	.globl _EP6FIFOIE
-	.globl _EP4FIFOIRQ
-	.globl _EP4FIFOIE
-	.globl _EP2FIFOIRQ
-	.globl _EP2FIFOIE
-	.globl _OUTPKTEND
-	.globl _INPKTEND
-	.globl _EP8ISOINPKTS
-	.globl _EP6ISOINPKTS
-	.globl _EP4ISOINPKTS
-	.globl _EP2ISOINPKTS
-	.globl _EP8FIFOPFL
-	.globl _EP8FIFOPFH
-	.globl _EP6FIFOPFL
-	.globl _EP6FIFOPFH
-	.globl _EP4FIFOPFL
-	.globl _EP4FIFOPFH
-	.globl _EP2FIFOPFL
-	.globl _EP2FIFOPFH
-	.globl _EP8AUTOINLENL
-	.globl _EP8AUTOINLENH
-	.globl _EP6AUTOINLENL
-	.globl _EP6AUTOINLENH
-	.globl _EP4AUTOINLENL
-	.globl _EP4AUTOINLENH
-	.globl _EP2AUTOINLENL
-	.globl _EP2AUTOINLENH
-	.globl _EP8FIFOCFG
-	.globl _EP6FIFOCFG
-	.globl _EP4FIFOCFG
-	.globl _EP2FIFOCFG
-	.globl _EP8CFG
-	.globl _EP6CFG
-	.globl _EP4CFG
-	.globl _EP2CFG
-	.globl _EP1INCFG
-	.globl _EP1OUTCFG
-	.globl _REVCTL
-	.globl _REVID
-	.globl _FIFOPINPOLAR
-	.globl _UART230
-	.globl _BPADDRL
-	.globl _BPADDRH
-	.globl _BREAKPT
-	.globl _FIFORESET
-	.globl _PINFLAGSCD
-	.globl _PINFLAGSAB
-	.globl _IFCONFIG
-	.globl _CPUCS
-	.globl _RES_WAVEDATA_END
-	.globl _GPIF_WAVE_DATA
-;--------------------------------------------------------
-; special function registers
-;--------------------------------------------------------
-_IOA	=	0x0080
-_SP	=	0x0081
-_DPL	=	0x0082
-_DPH	=	0x0083
-_DPL1	=	0x0084
-_DPH1	=	0x0085
-_DPS	=	0x0086
-_PCON	=	0x0087
-_TCON	=	0x0088
-_TMOD	=	0x0089
-_TL0	=	0x008a
-_TL1	=	0x008b
-_TH0	=	0x008c
-_TH1	=	0x008d
-_CKCON	=	0x008e
-_IOB	=	0x0090
-_EXIF	=	0x0091
-_MPAGE	=	0x0092
-_SCON0	=	0x0098
-_SBUF0	=	0x0099
-_APTR1H	=	0x009a
-_APTR1L	=	0x009b
-_AUTODAT1	=	0x009c
-_AUTOPTRH2	=	0x009d
-_AUTOPTRL2	=	0x009e
-_AUTODAT2	=	0x009f
-_IOC	=	0x00a0
-_INT2CLR	=	0x00a1
-_INT4CLR	=	0x00a2
-_IE	=	0x00a8
-_EP2468STAT	=	0x00aa
-_EP24FIFOFLGS	=	0x00ab
-_EP68FIFOFLGS	=	0x00ac
-_AUTOPTRSETUP	=	0x00af
-_IOD	=	0x00b0
-_IOE	=	0x00b1
-_OEA	=	0x00b2
-_OEB	=	0x00b3
-_OEC	=	0x00b4
-_OED	=	0x00b5
-_OEE	=	0x00b6
-_IP	=	0x00b8
-_EP01STAT	=	0x00ba
-_GPIFTRIG	=	0x00bb
-_GPIFSGLDATH	=	0x00bd
-_GPIFSGLDATLX	=	0x00be
-_GPIFSGLDATLNOX	=	0x00bf
-_SCON1	=	0x00c0
-_SBUF1	=	0x00c1
-_T2CON	=	0x00c8
-_RCAP2L	=	0x00ca
-_RCAP2H	=	0x00cb
-_TL2	=	0x00cc
-_TH2	=	0x00cd
-_PSW	=	0x00d0
-_EICON	=	0x00d8
-_ACC	=	0x00e0
-_EIE	=	0x00e8
-_B	=	0x00f0
-_EIP	=	0x00f8
-;--------------------------------------------------------
-; special function bits 
-;--------------------------------------------------------
-_SEL	=	0x0086
-_IT0	=	0x0088
-_IE0	=	0x0089
-_IT1	=	0x008a
-_IE1	=	0x008b
-_TR0	=	0x008c
-_TF0	=	0x008d
-_TR1	=	0x008e
-_TF1	=	0x008f
-_RI	=	0x0098
-_TI	=	0x0099
-_RB8	=	0x009a
-_TB8	=	0x009b
-_REN	=	0x009c
-_SM2	=	0x009d
-_SM1	=	0x009e
-_SM0	=	0x009f
-_EX0	=	0x00a8
-_ET0	=	0x00a9
-_EX1	=	0x00aa
-_ET1	=	0x00ab
-_ES0	=	0x00ac
-_ET2	=	0x00ad
-_ES1	=	0x00ae
-_EA	=	0x00af
-_PX0	=	0x00b8
-_PT0	=	0x00b9
-_PX1	=	0x00ba
-_PT1	=	0x00bb
-_PS0	=	0x00bc
-_PT2	=	0x00bd
-_PS1	=	0x00be
-_RI1	=	0x00c0
-_TI1	=	0x00c1
-_RB81	=	0x00c2
-_TB81	=	0x00c3
-_REN1	=	0x00c4
-_SM21	=	0x00c5
-_SM11	=	0x00c6
-_SM01	=	0x00c7
-_CP_RL2	=	0x00c8
-_C_T2	=	0x00c9
-_TR2	=	0x00ca
-_EXEN2	=	0x00cb
-_TCLK	=	0x00cc
-_RCLK	=	0x00cd
-_EXF2	=	0x00ce
-_TF2	=	0x00cf
-_P	=	0x00d0
-_FL	=	0x00d1
-_OV	=	0x00d2
-_RS0	=	0x00d3
-_RS1	=	0x00d4
-_F0	=	0x00d5
-_AC	=	0x00d6
-_CY	=	0x00d7
-_INT6	=	0x00db
-_RESI	=	0x00dc
-_ERESI	=	0x00dd
-_SMOD1	=	0x00df
-_EIUSB	=	0x00e8
-_EI2C	=	0x00e9
-_EIEX4	=	0x00ea
-_EIEX5	=	0x00eb
-_EIEX6	=	0x00ec
-_PUSB	=	0x00f8
-_PI2C	=	0x00f9
-_EIPX4	=	0x00fa
-_EIPX5	=	0x00fb
-_EIPX6	=	0x00fc
-_bitS_CLK	=	0x0080
-_bitS_OUT	=	0x0081
-_bitS_IN	=	0x0082
-_bitALTERA_DATA0	=	0x00a1
-_bitALTERA_DCLK	=	0x00a3
-;--------------------------------------------------------
-; overlayable register banks 
-;--------------------------------------------------------
-	.area REG_BANK_0	(REL,OVR,DATA)
-	.ds 8
-;--------------------------------------------------------
-; internal ram data
-;--------------------------------------------------------
-	.area DSEG    (DATA)
-;--------------------------------------------------------
-; overlayable items in internal ram 
-;--------------------------------------------------------
-	.area OSEG    (OVR,DATA)
-;--------------------------------------------------------
-; Stack segment in internal ram 
-;--------------------------------------------------------
-	.area	SSEG	(DATA)
-__start__stack:
-	.ds	1
-
-;--------------------------------------------------------
-; indirectly addressable internal ram data
-;--------------------------------------------------------
-	.area ISEG    (DATA)
-;--------------------------------------------------------
-; bit data
-;--------------------------------------------------------
-	.area BSEG    (BIT)
-;--------------------------------------------------------
-; external ram data
-;--------------------------------------------------------
-	.area XSEG    (XDATA)
-_GPIF_WAVE_DATA	=	0xe400
-_RES_WAVEDATA_END	=	0xe480
-_CPUCS	=	0xe600
-_IFCONFIG	=	0xe601
-_PINFLAGSAB	=	0xe602
-_PINFLAGSCD	=	0xe603
-_FIFORESET	=	0xe604
-_BREAKPT	=	0xe605
-_BPADDRH	=	0xe606
-_BPADDRL	=	0xe607
-_UART230	=	0xe608
-_FIFOPINPOLAR	=	0xe609
-_REVID	=	0xe60a
-_REVCTL	=	0xe60b
-_EP1OUTCFG	=	0xe610
-_EP1INCFG	=	0xe611
-_EP2CFG	=	0xe612
-_EP4CFG	=	0xe613
-_EP6CFG	=	0xe614
-_EP8CFG	=	0xe615
-_EP2FIFOCFG	=	0xe618
-_EP4FIFOCFG	=	0xe619
-_EP6FIFOCFG	=	0xe61a
-_EP8FIFOCFG	=	0xe61b
-_EP2AUTOINLENH	=	0xe620
-_EP2AUTOINLENL	=	0xe621
-_EP4AUTOINLENH	=	0xe622
-_EP4AUTOINLENL	=	0xe623
-_EP6AUTOINLENH	=	0xe624
-_EP6AUTOINLENL	=	0xe625
-_EP8AUTOINLENH	=	0xe626
-_EP8AUTOINLENL	=	0xe627
-_EP2FIFOPFH	=	0xe630
-_EP2FIFOPFL	=	0xe631
-_EP4FIFOPFH	=	0xe632
-_EP4FIFOPFL	=	0xe633
-_EP6FIFOPFH	=	0xe634
-_EP6FIFOPFL	=	0xe635
-_EP8FIFOPFH	=	0xe636
-_EP8FIFOPFL	=	0xe637
-_EP2ISOINPKTS	=	0xe640
-_EP4ISOINPKTS	=	0xe641
-_EP6ISOINPKTS	=	0xe642
-_EP8ISOINPKTS	=	0xe643
-_INPKTEND	=	0xe648
-_OUTPKTEND	=	0xe649
-_EP2FIFOIE	=	0xe650
-_EP2FIFOIRQ	=	0xe651
-_EP4FIFOIE	=	0xe652
-_EP4FIFOIRQ	=	0xe653
-_EP6FIFOIE	=	0xe654
-_EP6FIFOIRQ	=	0xe655
-_EP8FIFOIE	=	0xe656
-_EP8FIFOIRQ	=	0xe657
-_IBNIE	=	0xe658
-_IBNIRQ	=	0xe659
-_NAKIE	=	0xe65a
-_NAKIRQ	=	0xe65b
-_USBIE	=	0xe65c
-_USBIRQ	=	0xe65d
-_EPIE	=	0xe65e
-_EPIRQ	=	0xe65f
-_GPIFIE	=	0xe660
-_GPIFIRQ	=	0xe661
-_USBERRIE	=	0xe662
-_USBERRIRQ	=	0xe663
-_ERRCNTLIM	=	0xe664
-_CLRERRCNT	=	0xe665
-_INT2IVEC	=	0xe666
-_INT4IVEC	=	0xe667
-_INTSETUP	=	0xe668
-_PORTACFG	=	0xe670
-_PORTCCFG	=	0xe671
-_PORTECFG	=	0xe672
-_I2CS	=	0xe678
-_I2DAT	=	0xe679
-_I2CTL	=	0xe67a
-_XAUTODAT1	=	0xe67b
-_XAUTODAT2	=	0xe67c
-_USBCS	=	0xe680
-_SUSPEND	=	0xe681
-_WAKEUPCS	=	0xe682
-_TOGCTL	=	0xe683
-_USBFRAMEH	=	0xe684
-_USBFRAMEL	=	0xe685
-_MICROFRAME	=	0xe686
-_FNADDR	=	0xe687
-_EP0BCH	=	0xe68a
-_EP0BCL	=	0xe68b
-_EP1OUTBC	=	0xe68d
-_EP1INBC	=	0xe68f
-_EP2BCH	=	0xe690
-_EP2BCL	=	0xe691
-_EP4BCH	=	0xe694
-_EP4BCL	=	0xe695
-_EP6BCH	=	0xe698
-_EP6BCL	=	0xe699
-_EP8BCH	=	0xe69c
-_EP8BCL	=	0xe69d
-_EP0CS	=	0xe6a0
-_EP1OUTCS	=	0xe6a1
-_EP1INCS	=	0xe6a2
-_EP2CS	=	0xe6a3
-_EP4CS	=	0xe6a4
-_EP6CS	=	0xe6a5
-_EP8CS	=	0xe6a6
-_EP2FIFOFLGS	=	0xe6a7
-_EP4FIFOFLGS	=	0xe6a8
-_EP6FIFOFLGS	=	0xe6a9
-_EP8FIFOFLGS	=	0xe6aa
-_EP2FIFOBCH	=	0xe6ab
-_EP2FIFOBCL	=	0xe6ac
-_EP4FIFOBCH	=	0xe6ad
-_EP4FIFOBCL	=	0xe6ae
-_EP6FIFOBCH	=	0xe6af
-_EP6FIFOBCL	=	0xe6b0
-_EP8FIFOBCH	=	0xe6b1
-_EP8FIFOBCL	=	0xe6b2
-_SUDPTRH	=	0xe6b3
-_SUDPTRL	=	0xe6b4
-_SUDPTRCTL	=	0xe6b5
-_SETUPDAT	=	0xe6b8
-_GPIFWFSELECT	=	0xe6c0
-_GPIFIDLECS	=	0xe6c1
-_GPIFIDLECTL	=	0xe6c2
-_GPIFCTLCFG	=	0xe6c3
-_GPIFADRH	=	0xe6c4
-_GPIFADRL	=	0xe6c5
-_GPIFTCB3	=	0xe6ce
-_GPIFTCB2	=	0xe6cf
-_GPIFTCB1	=	0xe6d0
-_GPIFTCB0	=	0xe6d1
-_EP2GPIFFLGSEL	=	0xe6d2
-_EP2GPIFPFSTOP	=	0xe6d3
-_EP2GPIFTRIG	=	0xe6d4
-_EP4GPIFFLGSEL	=	0xe6da
-_EP4GPIFPFSTOP	=	0xe6db
-_EP4GPIFTRIG	=	0xe6dc
-_EP6GPIFFLGSEL	=	0xe6e2
-_EP6GPIFPFSTOP	=	0xe6e3
-_EP6GPIFTRIG	=	0xe6e4
-_EP8GPIFFLGSEL	=	0xe6ea
-_EP8GPIFPFSTOP	=	0xe6eb
-_EP8GPIFTRIG	=	0xe6ec
-_XGPIFSGLDATH	=	0xe6f0
-_XGPIFSGLDATLX	=	0xe6f1
-_XGPIFSGLDATLNOX	=	0xe6f2
-_GPIFREADYCFG	=	0xe6f3
-_GPIFREADYSTAT	=	0xe6f4
-_GPIFABORT	=	0xe6f5
-_FLOWSTATE	=	0xe6c6
-_FLOWLOGIC	=	0xe6c7
-_FLOWEQ0CTL	=	0xe6c8
-_FLOWEQ1CTL	=	0xe6c9
-_FLOWHOLDOFF	=	0xe6ca
-_FLOWSTB	=	0xe6cb
-_FLOWSTBEDGE	=	0xe6cc
-_FLOWSTBHPERIOD	=	0xe6cd
-_GPIFHOLDAMOUNT	=	0xe60c
-_UDMACRCH	=	0xe67d
-_UDMACRCL	=	0xe67e
-_UDMACRCQUAL	=	0xe67f
-_DBUG	=	0xe6f8
-_TESTCFG	=	0xe6f9
-_USBTEST	=	0xe6fa
-_CT1	=	0xe6fb
-_CT2	=	0xe6fc
-_CT3	=	0xe6fd
-_CT4	=	0xe6fe
-_EP0BUF	=	0xe740
-_EP1OUTBUF	=	0xe780
-_EP1INBUF	=	0xe7c0
-_EP2FIFOBUF	=	0xf000
-_EP4FIFOBUF	=	0xf400
-_EP6FIFOBUF	=	0xf800
-_EP8FIFOBUF	=	0xfc00
-;--------------------------------------------------------
-; external initialized ram data
-;--------------------------------------------------------
-;--------------------------------------------------------
-; interrupt vector 
-;--------------------------------------------------------
-	.area CSEG    (CODE)
-__interrupt_vect:
-	ljmp	__sdcc_gsinit_startup
-;--------------------------------------------------------
-; global & static initialisations
-;--------------------------------------------------------
-	.area GSINIT  (CODE)
-	.area GSFINAL (CODE)
-	.area GSINIT  (CODE)
-__sdcc_gsinit_startup:
-	mov	sp,#__start__stack - 1
-	lcall	__sdcc_external_startup
-	mov	a,dpl
-	jz	__sdcc_init_data
-	ljmp	__sdcc_program_startup
-__sdcc_init_data:
-	.area GSFINAL (CODE)
-	ljmp	__sdcc_program_startup
-;--------------------------------------------------------
-; Home
-;--------------------------------------------------------
-	.area HOME    (CODE)
-	.area CSEG    (CODE)
-;--------------------------------------------------------
-; code
-;--------------------------------------------------------
-	.area CSEG    (CODE)
-__sdcc_program_startup:
-	lcall	_eeprom_init
-;	return from _eeprom_init will spin here
-	sjmp .
-	.area CSEG    (CODE)

firmware/fx2/common/eeprom_init.c

@@ -1,75 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "usrp_common.h"
-#include "usrp_commands.h"
-
-/*
- * the host side fpga loader code pushes an MD5 hash of the bitstream
- * into hash1.
- */
-#define	  USRP_HASH_SIZE      16
-xdata at USRP_HASH_SLOT_0_ADDR unsigned char hash0[USRP_HASH_SIZE];
-
-
-#define REG_RX_PWR_DN		 1
-#define	REG_TX_PWR_DN		 8
-#define	REG_TX_MODULATOR	20
-
-void eeprom_init (void)
-{
-  unsigned short counter;
-  unsigned char	 i;
-
-  // configure IO ports (B and D are used by GPIF)
-
-  IOA = bmPORT_A_INITIAL;	// Port A initial state
-  OEA = bmPORT_A_OUTPUTS;	// Port A direction register
-
-  IOC = bmPORT_C_INITIAL;	// Port C initial state
-  OEC = bmPORT_C_OUTPUTS;	// Port C direction register
-
-  IOE = bmPORT_E_INITIAL;	// Port E initial state
-  OEE = bmPORT_E_OUTPUTS;	// Port E direction register
-
-  EP0BCH = 0;			SYNCDELAY;
-
-  // USBCS &= ~bmRENUM;		// chip firmware handles commands
-  USBCS = 0;			// chip firmware handles commands
-
-  //USRP_PC &= ~bmPC_nRESET;	// active low reset
-  //USRP_PC |=  bmPC_nRESET;
-
-  // zero firmware hash slot
-  i = 0;
-  do {
-    hash0[i] = 0;
-    i++;
-  } while (i != USRP_HASH_SIZE);
-
-  counter = 0;
-  while (1){
-    counter++;
-    if (counter & 0x8000)
-      IOC ^= bmPC_LED0;
-  }
-}

firmware/fx2/common/fpga.h

@@ -1,31 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-#ifndef INCLUDED_FPGA_H
-#define INCLUDED_FPGA_H
-
-#include "fpga_load.h"
-
-#if defined(HAVE_USRP2)
-#include "fpga_rev2.h"
-#endif
-
-#endif /* INCLUDED_FPGA_H */

firmware/fx2/common/fpga_load.h

@@ -1,28 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#ifndef INCLUDED_FPGA_LOAD_H
-#define INCLUDED_FPGA_LOAD_H
-
-unsigned char fpga_load_begin (void);
-unsigned char fpga_load_xfer (xdata unsigned char *p, unsigned char len);
-unsigned char fpga_load_end (void);
-
-#endif /* INCLUDED_FPGA_LOAD_H */

firmware/fx2/common/fpga_regs0.h

@@ -1,42 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef _FPGA_REGS0_H_
-#define _FPGA_REGS0_H_
-
-#define FR_RX_FREQ_0	   0
-#define FR_RX_FREQ_1	   1
-#define FR_RX_FREQ_2	   2
-#define FR_RX_FREQ_3	   3
-#define FR_TX_FREQ_0	   4
-#define FR_TX_FREQ_1	   5
-#define FR_TX_FREQ_2	   6
-#define FR_TX_FREQ_3	   7
-#define FR_COMBO	   8
-
-
-#define FR_ADC_CLK_DIV   128	// pseudo regs mapped to FR_COMBO by f/w
-#define FR_EXT_CLK_DIV	 129	
-#define FR_INTERP	 130
-#define FR_DECIM	 131
-
-#endif

firmware/fx2/common/fpga_regs_common.h

@@ -1,150 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003,2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.	If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-#ifndef INCLUDED_FPGA_REGS_COMMON_H
-#define INCLUDED_FPGA_REGS_COMMON_H
-
-// This file defines registers common to all FPGA configurations.
-// Registers 0 to 31 are reserved for use in this file.
-
-
-// The FPGA needs to know the rate that samples are coming from and
-// going to the A/D's and D/A's.  div = 128e6 / sample_rate
-
-#define	FR_TX_SAMPLE_RATE_DIV	 0
-#define	FR_RX_SAMPLE_RATE_DIV	 1
-
-// 2 and 3 are defined in the ATR section
-
-#define	FR_MASTER_CTRL		 4	// master enable and reset controls
-#  define  bmFR_MC_ENABLE_TX		(1 << 0)
-#  define  bmFR_MC_ENABLE_RX		(1 << 1)
-#  define  bmFR_MC_RESET_TX		(1 << 2)
-#  define  bmFR_MC_RESET_RX		(1 << 3)
-
-// i/o direction registers for pins that go to daughterboards.
-// Setting the bit makes it an output from the FPGA to the d'board.
-// top 16 is mask, low 16 is value
-
-#define	FR_OE_0			 5	// slot 0
-#define	FR_OE_1			 6
-#define	FR_OE_2			 7
-#define	FR_OE_3			 8
-
-// i/o registers for pins that go to daughterboards.
-// top 16 is a mask, low 16 is value
-
-#define	FR_IO_0			 9	// slot 0
-#define	FR_IO_1			10
-#define	FR_IO_2			11
-#define	FR_IO_3			12
-
-#define	FR_MODE			13
-#  define  bmFR_MODE_NORMAL		      0
-#  define  bmFR_MODE_LOOPBACK		(1 << 0)	// enable digital loopback
-#  define  bmFR_MODE_RX_COUNTING	(1 << 1)	// Rx is counting
-#  define  bmFR_MODE_RX_COUNTING_32BIT	(1 << 2)	// Rx is counting with a 32 bit counter
-                                                    // low and high 16 bits are multiplexed across channel I and Q
-
-
-// If the corresponding bit is set, internal FPGA debug circuitry
-// controls the i/o pins for the associated bank of daughterboard
-// i/o pins.  Typically used for debugging FPGA designs.
-
-#define FR_DEBUG_EN             14
-#  define bmFR_DEBUG_EN_TX_A           (1 << 0)        // debug controls TX_A i/o
-#  define bmFR_DEBUG_EN_RX_A           (1 << 1)        // debug controls RX_A i/o
-#  define bmFR_DEBUG_EN_TX_B           (1 << 2)        // debug controls TX_B i/o
-#  define bmFR_DEBUG_EN_RX_B           (1 << 3)        // debug controls RX_B i/o
-
-
-// If the corresponding bit is set, enable the automatic DC
-// offset correction control loop.
-//
-// The 4 low bits are significant:
-//
-//   ADC0 = (1 << 0)
-//   ADC1 = (1 << 1)
-//   ADC2 = (1 << 2)
-//   ADC3 = (1 << 3)
-//
-// This control loop works if the attached daugherboard blocks DC.
-// Currently all daughterboards do block DC.  This includes:
-// basic rx, dbs_rx, tv_rx, flex_xxx_rx.
-
-#define FR_DC_OFFSET_CL_EN	15			// DC Offset Control Loop Enable
-
-
-// offset corrections for ADC's and DAC's (2's complement)
-
-#define	FR_ADC_OFFSET_0	 	16
-#define	FR_ADC_OFFSET_1		17
-#define	FR_ADC_OFFSET_2	 	18
-#define	FR_ADC_OFFSET_3		19
-
-
-// ------------------------------------------------------------------------
-// Automatic Transmit/Receive switching
-//
-// If automatic transmit/receive (ATR) switching is enabled in the
-// FR_ATR_CTL register, the presence or absence of data in the FPGA
-// transmit fifo selects between two sets of values for each of the 4
-// banks of daughterboard i/o pins.
-//
-// Each daughterboard slot has 3 16-bit registers associated with it:
-//   FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_*
-//
-// FR_ATR_MASK_{0,1,2,3}: 
-//
-//   These registers determine which of the daugherboard i/o pins are
-//   affected by ATR switching.  If a bit in the mask is set, the
-//   corresponding i/o bit is controlled by ATR, else it's output
-//   value comes from the normal i/o pin output register:
-//   FR_IO_{0,1,2,3}.
-//
-// FR_ATR_TXVAL_{0,1,2,3}:
-// FR_ATR_RXVAL_{0,1,2,3}:
-//
-//   If the Tx fifo contains data, then the bits from TXVAL that are
-//   selected by MASK are output.  Otherwise, the bits from RXVAL that
-//   are selected by MASK are output.
-                      
-#define FR_ATR_MASK_0		20	// slot 0
-#define	FR_ATR_TXVAL_0		21
-#define FR_ATR_RXVAL_0		22
-
-#define FR_ATR_MASK_1		23	// slot 1
-#define	FR_ATR_TXVAL_1		24
-#define FR_ATR_RXVAL_1		25
-
-#define FR_ATR_MASK_2		26	// slot 2
-#define	FR_ATR_TXVAL_2		27
-#define FR_ATR_RXVAL_2		28
-
-#define FR_ATR_MASK_3		29	// slot 3
-#define	FR_ATR_TXVAL_3		30
-#define FR_ATR_RXVAL_3		31
-
-// Clock ticks to delay rising and falling edge of T/R signal
-#define FR_ATR_TX_DELAY          2
-#define FR_ATR_RX_DELAY          3
-
-#endif /* INCLUDED_FPGA_REGS_COMMON_H */

firmware/fx2/common/fpga_regs_common.v

@@ -1,117 +0,0 @@
-//
-// This file is machine generated from ./fpga_regs_common.h
-// Do not edit by hand; your edits will be overwritten.
-//
-
-// This file defines registers common to all FPGA configurations.
-// Registers 0 to 31 are reserved for use in this file.
-
-
-// The FPGA needs to know the rate that samples are coming from and
-// going to the A/D's and D/A's.  div = 128e6 / sample_rate
-
-`define FR_TX_SAMPLE_RATE_DIV     7'd0
-`define FR_RX_SAMPLE_RATE_DIV     7'd1
-
-// 2 and 3 are defined in the ATR section
-
-`define FR_MASTER_CTRL            7'd4	// master enable and reset controls
-
-// i/o direction registers for pins that go to daughterboards.
-// Setting the bit makes it an output from the FPGA to the d'board.
-// top 16 is mask, low 16 is value
-
-`define FR_OE_0                   7'd5	// slot 0
-`define FR_OE_1                   7'd6
-`define FR_OE_2                   7'd7
-`define FR_OE_3                   7'd8
-
-// i/o registers for pins that go to daughterboards.
-// top 16 is a mask, low 16 is value
-
-`define FR_IO_0                   7'd9	// slot 0
-`define FR_IO_1                   7'd10
-`define FR_IO_2                   7'd11
-`define FR_IO_3                   7'd12
-
-`define FR_MODE                   7'd13
-
-
-// If the corresponding bit is set, internal FPGA debug circuitry
-// controls the i/o pins for the associated bank of daughterboard
-// i/o pins.  Typically used for debugging FPGA designs.
-
-`define FR_DEBUG_EN               7'd14
-
-
-// If the corresponding bit is set, enable the automatic DC
-// offset correction control loop.
-//
-// The 4 low bits are significant:
-//
-//   ADC0 = (1 << 0)
-//   ADC1 = (1 << 1)
-//   ADC2 = (1 << 2)
-//   ADC3 = (1 << 3)
-//
-// This control loop works if the attached daugherboard blocks DC.
-// Currently all daughterboards do block DC.  This includes:
-// basic rx, dbs_rx, tv_rx, flex_xxx_rx.
-
-`define FR_DC_OFFSET_CL_EN        7'd15			// DC Offset Control Loop Enable
-
-
-// offset corrections for ADC's and DAC's (2's complement)
-
-`define FR_ADC_OFFSET_0           7'd16
-`define FR_ADC_OFFSET_1           7'd17
-`define FR_ADC_OFFSET_2           7'd18
-`define FR_ADC_OFFSET_3           7'd19
-
-
-// ------------------------------------------------------------------------
-// Automatic Transmit/Receive switching
-//
-// If automatic transmit/receive (ATR) switching is enabled in the
-// FR_ATR_CTL register, the presence or absence of data in the FPGA
-// transmit fifo selects between two sets of values for each of the 4
-// banks of daughterboard i/o pins.
-//
-// Each daughterboard slot has 3 16-bit registers associated with it:
-//   FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_*
-//
-// FR_ATR_MASK_{0,1,2,3}: 
-//
-//   These registers determine which of the daugherboard i/o pins are
-//   affected by ATR switching.  If a bit in the mask is set, the
-//   corresponding i/o bit is controlled by ATR, else it's output
-//   value comes from the normal i/o pin output register:
-//   FR_IO_{0,1,2,3}.
-//
-// FR_ATR_TXVAL_{0,1,2,3}:
-// FR_ATR_RXVAL_{0,1,2,3}:
-//
-//   If the Tx fifo contains data, then the bits from TXVAL that are
-//   selected by MASK are output.  Otherwise, the bits from RXVAL that
-//   are selected by MASK are output.
-                      
-`define FR_ATR_MASK_0             7'd20	// slot 0
-`define FR_ATR_TXVAL_0            7'd21
-`define FR_ATR_RXVAL_0            7'd22
-
-`define FR_ATR_MASK_1             7'd23	// slot 1
-`define FR_ATR_TXVAL_1            7'd24
-`define FR_ATR_RXVAL_1            7'd25
-
-`define FR_ATR_MASK_2             7'd26	// slot 2
-`define FR_ATR_TXVAL_2            7'd27
-`define FR_ATR_RXVAL_2            7'd28
-
-`define FR_ATR_MASK_3             7'd29	// slot 3
-`define FR_ATR_TXVAL_3            7'd30
-`define FR_ATR_RXVAL_3            7'd31
-
-// Clock ticks to delay rising and falling edge of T/R signal
-`define FR_ATR_TX_DELAY           7'd2
-`define FR_ATR_RX_DELAY           7'd3
-

firmware/fx2/common/fpga_regs_standard.h

@@ -1,300 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003,2004,2006 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.	If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-#ifndef INCLUDED_FPGA_REGS_STANDARD_H
-#define INCLUDED_FPGA_REGS_STANDARD_H
-
-// Register numbers 0 to 31 are reserved for use in fpga_regs_common.h.
-// Registers 64 to 79 are available for custom FPGA builds.
-
-
-// DDC / DUC
-
-#define	FR_INTERP_RATE		32	// [1,1024]
-#define	FR_DECIM_RATE		33	// [1,256]
-
-// DDC center freq
-
-#define FR_RX_FREQ_0		34
-#define FR_RX_FREQ_1		35
-#define FR_RX_FREQ_2		36
-#define FR_RX_FREQ_3		37
-
-// See below for DDC Starting Phase
-
-// ------------------------------------------------------------------------
-//  configure FPGA Rx mux
-//
-//    3                   2                   1                       
-//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-// +-----------------------+-------+-------+-------+-------+-+-----+
-// |      must be zero     | Q3| I3| Q2| I2| Q1| I1| Q0| I0|Z| NCH |
-// +-----------------------+-------+-------+-------+-------+-+-----+
-//
-// There are a maximum of 4 digital downconverters in the the FPGA.
-// Each DDC has two 16-bit inputs, I and Q, and two 16-bit outputs, I & Q.
-//
-// DDC I inputs are specified by the two bit fields I3, I2, I1 & I0
-//
-//   0 = DDC input is from ADC 0
-//   1 = DDC input is from ADC 1
-//   2 = DDC input is from ADC 2
-//   3 = DDC input is from ADC 3
-//
-// If Z == 1, all DDC Q inputs are set to zero
-// If Z == 0, DDC Q inputs are specified by the two bit fields Q3, Q2, Q1 & Q0
-//
-// NCH specifies the number of complex channels that are sent across
-// the USB.  The legal values are 1, 2 or 4, corresponding to 2, 4 or
-// 8 16-bit values.
-
-#define	FR_RX_MUX		38
-
-// ------------------------------------------------------------------------
-//  configure FPGA Tx Mux.
-//
-//    3                   2                   1                       
-//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-// +-----------------------+-------+-------+-------+-------+-+-----+
-// |                       | DAC3  | DAC2  | DAC1  |  DAC0 |0| NCH |
-// +-----------------------------------------------+-------+-+-----+
-//
-// NCH specifies the number of complex channels that are sent across
-// the USB.  The legal values are 1 or 2, corresponding to 2 or 4
-// 16-bit values.
-//
-// There are two interpolators with complex inputs and outputs.
-// There are four DACs.  (We use the DUC in each AD9862.)
-//
-// Each 4-bit DACx field specifies the source for the DAC and
-// whether or not that DAC is enabled.  Each subfield is coded
-// like this: 
-//
-//    3 2 1 0
-//   +-+-----+
-//   |E|  N  |
-//   +-+-----+
-//
-// Where E is set if the DAC is enabled, and N specifies which
-// interpolator output is connected to this DAC.
-//
-//  N   which interp output
-// ---  -------------------
-//  0   chan 0 I
-//  1   chan 0 Q
-//  2   chan 1 I
-//  3   chan 1 Q
-
-#define	FR_TX_MUX		39
-
-// ------------------------------------------------------------------------
-// REFCLK control
-//
-// Control whether a reference clock is sent to the daughterboards,
-// and what frequency.  The refclk is sent on d'board i/o pin 0.
-//
-//    3                   2                   1                       
-//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-// +-----------------------------------------------+-+------------+
-// |             Reserved (Must be zero)           |E|   DIVISOR  |
-// +-----------------------------------------------+-+------------+
-
-//
-// Bit 7  -- 1 turns on refclk, 0 allows IO use
-// Bits 6:0 Divider value
-
-#define FR_TX_A_REFCLK          40
-#define FR_RX_A_REFCLK          41
-#define FR_TX_B_REFCLK          42
-#define FR_RX_B_REFCLK          43
-
-#  define bmFR_REFCLK_EN	   0x80
-#  define bmFR_REFCLK_DIVISOR_MASK 0x7f
-
-// ------------------------------------------------------------------------
-// DDC Starting Phase
-
-#define FR_RX_PHASE_0		44
-#define FR_RX_PHASE_1		45
-#define FR_RX_PHASE_2		46
-#define FR_RX_PHASE_3		47
-
-// ------------------------------------------------------------------------
-// Tx data format control register
-//
-//    3                   2                   1                       
-//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-// +-------------------------------------------------------+-------+
-// |                    Reserved (Must be zero)            |  FMT  |
-// +-------------------------------------------------------+-------+
-//
-//  FMT values:
-
-#define FR_TX_FORMAT		48
-#  define bmFR_TX_FORMAT_16_IQ		0	// 16-bit I, 16-bit Q
-
-// ------------------------------------------------------------------------
-// Rx data format control register
-//
-//    3                   2                   1                       
-//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-// +-----------------------------------------+-+-+---------+-------+
-// |          Reserved (Must be zero)        |B|Q|  WIDTH  | SHIFT |
-// +-----------------------------------------+-+-+---------+-------+
-//
-//  FMT values:
-
-#define FR_RX_FORMAT		49
-
-#  define bmFR_RX_FORMAT_SHIFT_MASK	(0x0f <<  0)	// arithmetic right shift [0, 15]
-#  define bmFR_RX_FORMAT_SHIFT_SHIFT	0
-#  define bmFR_RX_FORMAT_WIDTH_MASK	(0x1f <<  4)    // data width in bits [1, 16] (not all valid)
-#  define bmFR_RX_FORMAT_WIDTH_SHIFT    4
-#  define bmFR_RX_FORMAT_WANT_Q		(0x1  <<  9)    // deliver both I & Q, else just I
-#  define bmFR_RX_FORMAT_BYPASS_HB	(0x1  << 10)    // bypass half-band filter
-
-// The valid combinations currently are:
-//
-//   B  Q  WIDTH  SHIFT
-//   0  1    16     0
-//   0  1     8     8
-
-
-// Possible future values of WIDTH = {4, 2, 1}
-// 12 takes a bit more work, since we need to know packet alignment.
-
-// ------------------------------------------------------------------------
-// FIXME register numbers 50 to 63 are available
-
-// ------------------------------------------------------------------------
-// Registers 64 to 95 are reserved for user custom FPGA builds.
-// The standard USRP software will not touch these.
-
-#define FR_USER_0	64
-#define FR_USER_1	65
-#define FR_USER_2	66
-#define FR_USER_3	67
-#define FR_USER_4	68
-#define FR_USER_5	69
-#define FR_USER_6	70
-#define FR_USER_7	71
-#define FR_USER_8	72
-#define FR_USER_9	73
-#define FR_USER_10	74
-#define FR_USER_11	75
-#define FR_USER_12	76
-#define FR_USER_13	77
-#define FR_USER_14	78
-#define FR_USER_15	79
-#define FR_USER_16	80
-#define FR_USER_17	81
-#define FR_USER_18	82
-#define FR_USER_19	83
-#define FR_USER_20	84
-#define FR_USER_21	85
-#define FR_USER_22	86
-#define FR_USER_23	87
-#define FR_USER_24	88
-#define FR_USER_25	89
-#define FR_USER_26	90
-#define FR_USER_27	91
-#define FR_USER_28	92
-#define FR_USER_29	93
-#define FR_USER_30	94
-#define FR_USER_31	95
-
-//Registers needed for multi usrp master/slave configuration
-//
-//Rx Master/slave control register (FR_RX_MASTER_SLAVE = FR_USER_0)
-//
-#define FR_RX_MASTER_SLAVE		64
-#define bitnoFR_RX_SYNC			0
-#define bitnoFR_RX_SYNC_MASTER		1
-#define bitnoFR_RX_SYNC_SLAVE		2
-#  define bmFR_RX_SYNC          (1 <<bitnoFR_RX_SYNC) //1 If this is a master "sync now" and send sync to slave.
-                                                      //  If this is a slave "sync now" (testing purpose only)
-                                                      //  Sync is allmost the same as reset (clear all counters and buffers) 
-                                                      //  except that the io outputs and settings don't get reset (otherwise it couldn't send the sync to the slave)
-                                                      //0 Normal operation
-
-#  define bmFR_RX_SYNC_MASTER (1 <<bitnoFR_RX_SYNC_MASTER) //1 This is a rx sync master, output sync_rx on rx_a_io[15]
-                                                           //0 This is not a rx sync master
-#  define bmFR_RX_SYNC_SLAVE  (1 <<bitnoFR_RX_SYNC_SLAVE) //1 This is a rx sync slave, follow sync_rx on rx_a_io[bitnoFR_RX_SYNC_INPUT_IOPIN]
-                                                          //0 This is not an rx sync slave.
-
-//Caution The master settings will output values on the io lines.
-//They inheritely enable these lines as output. If you have a daughtercard which uses these lines also as output then you will burn your usrp and daughtercard.
-//If you set the slave bits then your usrp won't do anything if you don't connect a master.
-// Rx Master/slave control register
-//
-// The way this is supposed to be used is connecting a (short) 16pin flatcable from an rx daughterboard in RXA master io_rx[8..15] to slave io_rx[8..15] on RXA of slave usrp
-// This can be done with basic_rx boards or dbsrx boards
-//dbsrx: connect master-J25 to slave-J25
-//basic rx: connect J25 to slave-J25
-//CAUTION: pay attention to the lineup of your connector.
-//The red line (pin1) should be at the same side of the daughterboards on master and slave.
-//If you turnaround the cable on one end you will burn your usrp.
-
-//You cannot use a 16pin flatcable if you are using FLEX400 or FLEX2400 daughterboards, since these use a lot of the io pins.
-//You can still link them but you must use only a 2pin or 1pin cable
-//You can also use a 2-wire link. put a 2pin header on io[15],gnd of the master RXA daughterboard and connect it to io15,gnd of the slave RXA db.
-//You can use a cable like the ones found with the leds on the mainbord of a PC.
-//Make sure you don't twist the cable, otherwise you connect the sync output to ground.
-//To be save you could also just use a single wire from master io[15] to slave io[15], but this is not optimal for signal integrity.
-
-
-// Since rx_io[0] can normally be used as a refclk and is not exported on all daughterboards this line
-// still has the refclk function if you use the master/slave setup (it is not touched by the master/slave settings).
-// The master/slave circuitry will only use io pin 15 and does not touch any of the other io pins.
-#define bitnoFR_RX_SYNC_INPUT_IOPIN		15
-#define bmFR_RX_SYNC_INPUT_IOPIN		(1<<bitnoFR_RX_SYNC_INPUT_IOPIN)
-//TODO the output pin is still hardcoded in the verilog code, make it listen to the following define
-#define bitnoFR_RX_SYNC_OUTPUT_IOPIN	15
-#define bmFR_RX_SYNC_OUTPUT_IOPIN	(1<<bitnoFR_RX_SYNC_OUTPUT_IOPIN)
-// =======================================================================
-// READBACK Registers
-// =======================================================================
-
-#define FR_RB_IO_RX_A_IO_TX_A	1	// read back a-side i/o pins
-#define	FR_RB_IO_RX_B_IO_TX_B	2	// read back b-side i/o pins
-
-// ------------------------------------------------------------------------
-// FPGA Capability register
-//
-//    3                   2                   1                       
-//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-// +-----------------------------------------------+-+-----+-+-----+
-// |                    Reserved (Must be zero)    |T|NDUC |R|NDDC |
-// +-----------------------------------------------+-+-----+-+-----+
-//
-// Bottom 4-bits are Rx capabilities
-// Next   4-bits are Tx capabilities
-
-#define	FR_RB_CAPS	3
-#  define bmFR_RB_CAPS_NDDC_MASK	(0x7 << 0)   // # of digital down converters 0,1,2,4
-#  define bmFR_RB_CAPS_NDDC_SHIFT	0
-#  define bmFR_RB_CAPS_RX_HAS_HALFBAND	(0x1 << 3)
-#  define bmFR_RB_CAPS_NDUC_MASK        (0x7 << 4)   // # of digital up converters 0,1,2
-#  define bmFR_RB_CAPS_NDUC_SHIFT	4
-#  define bmFR_RB_CAPS_TX_HAS_HALFBAND	(0x1 << 7)
-
-
-#endif /* INCLUDED_FPGA_REGS_STANDARD_H */

firmware/fx2/common/fpga_regs_standard.v

@@ -1,256 +0,0 @@
-//
-// This file is machine generated from ./fpga_regs_standard.h
-// Do not edit by hand; your edits will be overwritten.
-//
-
-// Register numbers 0 to 31 are reserved for use in fpga_regs_common.h.
-// Registers 64 to 79 are available for custom FPGA builds.
-
-
-// DDC / DUC
-
-`define FR_INTERP_RATE            7'd32	// [1,1024]
-`define FR_DECIM_RATE             7'd33	// [1,256]
-
-// DDC center freq
-
-`define FR_RX_FREQ_0              7'd34
-`define FR_RX_FREQ_1              7'd35
-`define FR_RX_FREQ_2              7'd36
-`define FR_RX_FREQ_3              7'd37
-
-// See below for DDC Starting Phase
-
-// ------------------------------------------------------------------------
-//  configure FPGA Rx mux
-//
-//    3                   2                   1                       
-//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-// +-----------------------+-------+-------+-------+-------+-+-----+
-// |      must be zero     | Q3| I3| Q2| I2| Q1| I1| Q0| I0|Z| NCH |
-// +-----------------------+-------+-------+-------+-------+-+-----+
-//
-// There are a maximum of 4 digital downconverters in the the FPGA.
-// Each DDC has two 16-bit inputs, I and Q, and two 16-bit outputs, I & Q.
-//
-// DDC I inputs are specified by the two bit fields I3, I2, I1 & I0
-//
-//   0 = DDC input is from ADC 0
-//   1 = DDC input is from ADC 1
-//   2 = DDC input is from ADC 2
-//   3 = DDC input is from ADC 3
-//
-// If Z == 1, all DDC Q inputs are set to zero
-// If Z == 0, DDC Q inputs are specified by the two bit fields Q3, Q2, Q1 & Q0
-//
-// NCH specifies the number of complex channels that are sent across
-// the USB.  The legal values are 1, 2 or 4, corresponding to 2, 4 or
-// 8 16-bit values.
-
-`define FR_RX_MUX                 7'd38
-
-// ------------------------------------------------------------------------
-//  configure FPGA Tx Mux.
-//
-//    3                   2                   1                       
-//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-// +-----------------------+-------+-------+-------+-------+-+-----+
-// |                       | DAC3  | DAC2  | DAC1  |  DAC0 |0| NCH |
-// +-----------------------------------------------+-------+-+-----+
-//
-// NCH specifies the number of complex channels that are sent across
-// the USB.  The legal values are 1 or 2, corresponding to 2 or 4
-// 16-bit values.
-//
-// There are two interpolators with complex inputs and outputs.
-// There are four DACs.  (We use the DUC in each AD9862.)
-//
-// Each 4-bit DACx field specifies the source for the DAC and
-// whether or not that DAC is enabled.  Each subfield is coded
-// like this: 
-//
-//    3 2 1 0
-//   +-+-----+
-//   |E|  N  |
-//   +-+-----+
-//
-// Where E is set if the DAC is enabled, and N specifies which
-// interpolator output is connected to this DAC.
-//
-//  N   which interp output
-// ---  -------------------
-//  0   chan 0 I
-//  1   chan 0 Q
-//  2   chan 1 I
-//  3   chan 1 Q
-
-`define FR_TX_MUX                 7'd39
-
-// ------------------------------------------------------------------------
-// REFCLK control
-//
-// Control whether a reference clock is sent to the daughterboards,
-// and what frequency.  The refclk is sent on d'board i/o pin 0.
-//
-//    3                   2                   1                       
-//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-// +-----------------------------------------------+-+------------+
-// |             Reserved (Must be zero)           |E|   DIVISOR  |
-// +-----------------------------------------------+-+------------+
-
-//
-// Bit 7  -- 1 turns on refclk, 0 allows IO use
-// Bits 6:0 Divider value
-
-`define FR_TX_A_REFCLK            7'd40
-`define FR_RX_A_REFCLK            7'd41
-`define FR_TX_B_REFCLK            7'd42
-`define FR_RX_B_REFCLK            7'd43
-
-
-// ------------------------------------------------------------------------
-// DDC Starting Phase
-
-`define FR_RX_PHASE_0             7'd44
-`define FR_RX_PHASE_1             7'd45
-`define FR_RX_PHASE_2             7'd46
-`define FR_RX_PHASE_3             7'd47
-
-// ------------------------------------------------------------------------
-// Tx data format control register
-//
-//    3                   2                   1                       
-//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-// +-------------------------------------------------------+-------+
-// |                    Reserved (Must be zero)            |  FMT  |
-// +-------------------------------------------------------+-------+
-//
-//  FMT values:
-
-`define FR_TX_FORMAT              7'd48
-
-// ------------------------------------------------------------------------
-// Rx data format control register
-//
-//    3                   2                   1                       
-//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-// +-----------------------------------------+-+-+---------+-------+
-// |          Reserved (Must be zero)        |B|Q|  WIDTH  | SHIFT |
-// +-----------------------------------------+-+-+---------+-------+
-//
-//  FMT values:
-
-`define FR_RX_FORMAT              7'd49
-
-
-// The valid combinations currently are:
-//
-//   B  Q  WIDTH  SHIFT
-//   0  1    16     0
-//   0  1     8     8
-
-
-// Possible future values of WIDTH = {4, 2, 1}
-// 12 takes a bit more work, since we need to know packet alignment.
-
-// ------------------------------------------------------------------------
-// FIXME register numbers 50 to 63 are available
-
-// ------------------------------------------------------------------------
-// Registers 64 to 95 are reserved for user custom FPGA builds.
-// The standard USRP software will not touch these.
-
-`define FR_USER_0                 7'd64
-`define FR_USER_1                 7'd65
-`define FR_USER_2                 7'd66
-`define FR_USER_3                 7'd67
-`define FR_USER_4                 7'd68
-`define FR_USER_5                 7'd69
-`define FR_USER_6                 7'd70
-`define FR_USER_7                 7'd71
-`define FR_USER_8                 7'd72
-`define FR_USER_9                 7'd73
-`define FR_USER_10                7'd74
-`define FR_USER_11                7'd75
-`define FR_USER_12                7'd76
-`define FR_USER_13                7'd77
-`define FR_USER_14                7'd78
-`define FR_USER_15                7'd79
-`define FR_USER_16                7'd80
-`define FR_USER_17                7'd81
-`define FR_USER_18                7'd82
-`define FR_USER_19                7'd83
-`define FR_USER_20                7'd84
-`define FR_USER_21                7'd85
-`define FR_USER_22                7'd86
-`define FR_USER_23                7'd87
-`define FR_USER_24                7'd88
-`define FR_USER_25                7'd89
-`define FR_USER_26                7'd90
-`define FR_USER_27                7'd91
-`define FR_USER_28                7'd92
-`define FR_USER_29                7'd93
-`define FR_USER_30                7'd94
-`define FR_USER_31                7'd95
-
-//Registers needed for multi usrp master/slave configuration
-//
-//Rx Master/slave control register (FR_RX_MASTER_SLAVE = FR_USER_0)
-//
-`define FR_RX_MASTER_SLAVE        7'd64
-`define bitnoFR_RX_SYNC           0
-`define bitnoFR_RX_SYNC_MASTER    1
-`define bitnoFR_RX_SYNC_SLAVE     2
-
-
-//Caution The master settings will output values on the io lines.
-//They inheritely enable these lines as output. If you have a daughtercard which uses these lines also as output then you will burn your usrp and daughtercard.
-//If you set the slave bits then your usrp won't do anything if you don't connect a master.
-// Rx Master/slave control register
-//
-// The way this is supposed to be used is connecting a (short) 16pin flatcable from an rx daughterboard in RXA master io_rx[8..15] to slave io_rx[8..15] on RXA of slave usrp
-// This can be done with basic_rx boards or dbsrx boards
-//dbsrx: connect master-J25 to slave-J25
-//basic rx: connect J25 to slave-J25
-//CAUTION: pay attention to the lineup of your connector.
-//The red line (pin1) should be at the same side of the daughterboards on master and slave.
-//If you turnaround the cable on one end you will burn your usrp.
-
-//You cannot use a 16pin flatcable if you are using FLEX400 or FLEX2400 daughterboards, since these use a lot of the io pins.
-//You can still link them but you must use only a 2pin or 1pin cable
-//You can also use a 2-wire link. put a 2pin header on io[15],gnd of the master RXA daughterboard and connect it to io15,gnd of the slave RXA db.
-//You can use a cable like the ones found with the leds on the mainbord of a PC.
-//Make sure you don't twist the cable, otherwise you connect the sync output to ground.
-//To be save you could also just use a single wire from master io[15] to slave io[15], but this is not optimal for signal integrity.
-
-
-// Since rx_io[0] can normally be used as a refclk and is not exported on all daughterboards this line
-// still has the refclk function if you use the master/slave setup (it is not touched by the master/slave settings).
-// The master/slave circuitry will only use io pin 15 and does not touch any of the other io pins.
-`define bitnoFR_RX_SYNC_INPUT_IOPIN 15
-`define bmFR_RX_SYNC_INPUT_IOPIN  (1<<bitnoFR_RX_SYNC_INPUT_IOPIN)
-//TODO the output pin is still hardcoded in the verilog code, make it listen to the following define
-`define bitnoFR_RX_SYNC_OUTPUT_IOPIN 15
-`define bmFR_RX_SYNC_OUTPUT_IOPIN (1<<bitnoFR_RX_SYNC_OUTPUT_IOPIN)
-// =======================================================================
-// READBACK Registers
-// =======================================================================
-
-`define FR_RB_IO_RX_A_IO_TX_A     7'd1	// read back a-side i/o pins
-`define FR_RB_IO_RX_B_IO_TX_B     7'd2	// read back b-side i/o pins
-
-// ------------------------------------------------------------------------
-// FPGA Capability register
-//
-//    3                   2                   1                       
-//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-// +-----------------------------------------------+-+-----+-+-----+
-// |                    Reserved (Must be zero)    |T|NDUC |R|NDDC |
-// +-----------------------------------------------+-+-----+-+-----+
-//
-// Bottom 4-bits are Rx capabilities
-// Next   4-bits are Tx capabilities
-
-`define FR_RB_CAPS                7'd3
-
-

firmware/fx2/common/fx2regs.h

@@ -1,720 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-/*
-//-----------------------------------------------------------------------------
-//   File:      FX2regs.h
-//   Contents:   EZ-USB FX2 register declarations and bit mask definitions.
-//
-// $Archive: /USB/Target/Inc/fx2regs.h $
-// $Date$
-// $Revision$
-//
-//
-//   Copyright (c) 2000 Cypress Semiconductor, All rights reserved
-//-----------------------------------------------------------------------------
-*/
-
-
-#ifndef FX2REGS_H   /* Header Sentry */
-#define FX2REGS_H
-
-#define ALLOCATE_EXTERN		// required for "right thing to happen" with fx2regs.h
-
-/*
-//-----------------------------------------------------------------------------
-// FX2 Related Register Assignments
-//-----------------------------------------------------------------------------
-
-// The Ez-USB FX2 registers are defined here. We use FX2regs.h for register 
-// address allocation by using "#define ALLOCATE_EXTERN". 
-// When using "#define ALLOCATE_EXTERN", you get (for instance): 
-// xdata volatile BYTE OUT7BUF[64]   _at_   0x7B40;
-// Such lines are created from FX2.h by using the preprocessor. 
-// Incidently, these lines will not generate any space in the resulting hex 
-// file; they just bind the symbols to the addresses for compilation. 
-// You just need to put "#define ALLOCATE_EXTERN" in your main program file; 
-// i.e. fw.c or a stand-alone C source file. 
-// Without "#define ALLOCATE_EXTERN", you just get the external reference: 
-// extern xdata volatile BYTE OUT7BUF[64]   ;//   0x7B40;
-// This uses the concatenation operator "##" to insert a comment "//" 
-// to cut off the end of the line, "_at_   0x7B40;", which is not wanted.
-*/
-
-
-#ifdef ALLOCATE_EXTERN
-#define EXTERN
-#define _AT_(a) at a
-#else
-#define EXTERN extern
-#define _AT_ ;/ ## /
-#endif
-
-typedef unsigned char BYTE;
-typedef unsigned short WORD;
-
-EXTERN xdata _AT_(0xE400) volatile BYTE GPIF_WAVE_DATA[128];
-EXTERN xdata _AT_(0xE480) volatile BYTE RES_WAVEDATA_END  ;
-
-// General Configuration
-
-EXTERN xdata _AT_(0xE600) volatile BYTE CPUCS             ;  // Control & Status
-EXTERN xdata _AT_(0xE601) volatile BYTE IFCONFIG          ;  // Interface Configuration
-EXTERN xdata _AT_(0xE602) volatile BYTE PINFLAGSAB        ;  // FIFO FLAGA and FLAGB Assignments
-EXTERN xdata _AT_(0xE603) volatile BYTE PINFLAGSCD        ;  // FIFO FLAGC and FLAGD Assignments
-EXTERN xdata _AT_(0xE604) volatile BYTE FIFORESET         ;  // Restore FIFOS to default state
-EXTERN xdata _AT_(0xE605) volatile BYTE BREAKPT           ;  // Breakpoint
-EXTERN xdata _AT_(0xE606) volatile BYTE BPADDRH           ;  // Breakpoint Address H
-EXTERN xdata _AT_(0xE607) volatile BYTE BPADDRL           ;  // Breakpoint Address L
-EXTERN xdata _AT_(0xE608) volatile BYTE UART230           ;  // 230 Kbaud clock for T0,T1,T2
-EXTERN xdata _AT_(0xE609) volatile BYTE FIFOPINPOLAR      ;  // FIFO polarities
-EXTERN xdata _AT_(0xE60A) volatile BYTE REVID             ;  // Chip Revision
-EXTERN xdata _AT_(0xE60B) volatile BYTE REVCTL            ;  // Chip Revision Control
-
-// Endpoint Configuration
-
-EXTERN xdata _AT_(0xE610) volatile BYTE EP1OUTCFG         ;  // Endpoint 1-OUT Configuration
-EXTERN xdata _AT_(0xE611) volatile BYTE EP1INCFG          ;  // Endpoint 1-IN Configuration
-EXTERN xdata _AT_(0xE612) volatile BYTE EP2CFG            ;  // Endpoint 2 Configuration
-EXTERN xdata _AT_(0xE613) volatile BYTE EP4CFG            ;  // Endpoint 4 Configuration
-EXTERN xdata _AT_(0xE614) volatile BYTE EP6CFG            ;  // Endpoint 6 Configuration
-EXTERN xdata _AT_(0xE615) volatile BYTE EP8CFG            ;  // Endpoint 8 Configuration
-EXTERN xdata _AT_(0xE618) volatile BYTE EP2FIFOCFG        ;  // Endpoint 2 FIFO configuration
-EXTERN xdata _AT_(0xE619) volatile BYTE EP4FIFOCFG        ;  // Endpoint 4 FIFO configuration
-EXTERN xdata _AT_(0xE61A) volatile BYTE EP6FIFOCFG        ;  // Endpoint 6 FIFO configuration
-EXTERN xdata _AT_(0xE61B) volatile BYTE EP8FIFOCFG        ;  // Endpoint 8 FIFO configuration
-EXTERN xdata _AT_(0xE620) volatile BYTE EP2AUTOINLENH     ;  // Endpoint 2 Packet Length H (IN only)
-EXTERN xdata _AT_(0xE621) volatile BYTE EP2AUTOINLENL     ;  // Endpoint 2 Packet Length L (IN only)
-EXTERN xdata _AT_(0xE622) volatile BYTE EP4AUTOINLENH     ;  // Endpoint 4 Packet Length H (IN only)
-EXTERN xdata _AT_(0xE623) volatile BYTE EP4AUTOINLENL     ;  // Endpoint 4 Packet Length L (IN only)
-EXTERN xdata _AT_(0xE624) volatile BYTE EP6AUTOINLENH     ;  // Endpoint 6 Packet Length H (IN only)
-EXTERN xdata _AT_(0xE625) volatile BYTE EP6AUTOINLENL     ;  // Endpoint 6 Packet Length L (IN only)
-EXTERN xdata _AT_(0xE626) volatile BYTE EP8AUTOINLENH     ;  // Endpoint 8 Packet Length H (IN only)
-EXTERN xdata _AT_(0xE627) volatile BYTE EP8AUTOINLENL     ;  // Endpoint 8 Packet Length L (IN only)
-EXTERN xdata _AT_(0xE630) volatile BYTE EP2FIFOPFH        ;  // EP2 Programmable Flag trigger H
-EXTERN xdata _AT_(0xE631) volatile BYTE EP2FIFOPFL        ;  // EP2 Programmable Flag trigger L
-EXTERN xdata _AT_(0xE632) volatile BYTE EP4FIFOPFH        ;  // EP4 Programmable Flag trigger H
-EXTERN xdata _AT_(0xE633) volatile BYTE EP4FIFOPFL        ;  // EP4 Programmable Flag trigger L
-EXTERN xdata _AT_(0xE634) volatile BYTE EP6FIFOPFH        ;  // EP6 Programmable Flag trigger H
-EXTERN xdata _AT_(0xE635) volatile BYTE EP6FIFOPFL        ;  // EP6 Programmable Flag trigger L
-EXTERN xdata _AT_(0xE636) volatile BYTE EP8FIFOPFH        ;  // EP8 Programmable Flag trigger H
-EXTERN xdata _AT_(0xE637) volatile BYTE EP8FIFOPFL        ;  // EP8 Programmable Flag trigger L
-EXTERN xdata _AT_(0xE640) volatile BYTE EP2ISOINPKTS      ;  // EP2 (if ISO) IN Packets per frame (1-3)
-EXTERN xdata _AT_(0xE641) volatile BYTE EP4ISOINPKTS      ;  // EP4 (if ISO) IN Packets per frame (1-3)
-EXTERN xdata _AT_(0xE642) volatile BYTE EP6ISOINPKTS      ;  // EP6 (if ISO) IN Packets per frame (1-3)
-EXTERN xdata _AT_(0xE643) volatile BYTE EP8ISOINPKTS      ;  // EP8 (if ISO) IN Packets per frame (1-3)
-EXTERN xdata _AT_(0xE648) volatile BYTE INPKTEND          ;  // Force IN Packet End
-EXTERN xdata _AT_(0xE649) volatile BYTE OUTPKTEND         ;  // Force OUT Packet End
-
-// Interrupts
-
-EXTERN xdata _AT_(0xE650) volatile BYTE EP2FIFOIE         ;  // Endpoint 2 Flag Interrupt Enable
-EXTERN xdata _AT_(0xE651) volatile BYTE EP2FIFOIRQ        ;  // Endpoint 2 Flag Interrupt Request
-EXTERN xdata _AT_(0xE652) volatile BYTE EP4FIFOIE         ;  // Endpoint 4 Flag Interrupt Enable
-EXTERN xdata _AT_(0xE653) volatile BYTE EP4FIFOIRQ        ;  // Endpoint 4 Flag Interrupt Request
-EXTERN xdata _AT_(0xE654) volatile BYTE EP6FIFOIE         ;  // Endpoint 6 Flag Interrupt Enable
-EXTERN xdata _AT_(0xE655) volatile BYTE EP6FIFOIRQ        ;  // Endpoint 6 Flag Interrupt Request
-EXTERN xdata _AT_(0xE656) volatile BYTE EP8FIFOIE         ;  // Endpoint 8 Flag Interrupt Enable
-EXTERN xdata _AT_(0xE657) volatile BYTE EP8FIFOIRQ        ;  // Endpoint 8 Flag Interrupt Request
-EXTERN xdata _AT_(0xE658) volatile BYTE IBNIE             ;  // IN-BULK-NAK Interrupt Enable
-EXTERN xdata _AT_(0xE659) volatile BYTE IBNIRQ            ;  // IN-BULK-NAK interrupt Request
-EXTERN xdata _AT_(0xE65A) volatile BYTE NAKIE             ;  // Endpoint Ping NAK interrupt Enable
-EXTERN xdata _AT_(0xE65B) volatile BYTE NAKIRQ            ;  // Endpoint Ping NAK interrupt Request
-EXTERN xdata _AT_(0xE65C) volatile BYTE USBIE             ;  // USB Int Enables
-EXTERN xdata _AT_(0xE65D) volatile BYTE USBIRQ            ;  // USB Interrupt Requests
-EXTERN xdata _AT_(0xE65E) volatile BYTE EPIE              ;  // Endpoint Interrupt Enables
-EXTERN xdata _AT_(0xE65F) volatile BYTE EPIRQ             ;  // Endpoint Interrupt Requests
-EXTERN xdata _AT_(0xE660) volatile BYTE GPIFIE            ;  // GPIF Interrupt Enable
-EXTERN xdata _AT_(0xE661) volatile BYTE GPIFIRQ           ;  // GPIF Interrupt Request
-EXTERN xdata _AT_(0xE662) volatile BYTE USBERRIE          ;  // USB Error Interrupt Enables
-EXTERN xdata _AT_(0xE663) volatile BYTE USBERRIRQ         ;  // USB Error Interrupt Requests
-EXTERN xdata _AT_(0xE664) volatile BYTE ERRCNTLIM         ;  // USB Error counter and limit
-EXTERN xdata _AT_(0xE665) volatile BYTE CLRERRCNT         ;  // Clear Error Counter EC[3..0]
-EXTERN xdata _AT_(0xE666) volatile BYTE INT2IVEC          ;  // Interupt 2 (USB) Autovector
-EXTERN xdata _AT_(0xE667) volatile BYTE INT4IVEC          ;  // Interupt 4 (FIFOS & GPIF) Autovector
-EXTERN xdata _AT_(0xE668) volatile BYTE INTSETUP          ;  // Interrupt 2&4 Setup
-
-// Input/Output
-
-EXTERN xdata _AT_(0xE670) volatile BYTE PORTACFG          ;  // I/O PORTA Alternate Configuration
-EXTERN xdata _AT_(0xE671) volatile BYTE PORTCCFG          ;  // I/O PORTC Alternate Configuration
-EXTERN xdata _AT_(0xE672) volatile BYTE PORTECFG          ;  // I/O PORTE Alternate Configuration
-EXTERN xdata _AT_(0xE678) volatile BYTE I2CS              ;  // Control & Status
-EXTERN xdata _AT_(0xE679) volatile BYTE I2DAT             ;  // Data
-EXTERN xdata _AT_(0xE67A) volatile BYTE I2CTL             ;  // I2C Control
-EXTERN xdata _AT_(0xE67B) volatile BYTE XAUTODAT1         ;  // Autoptr1 MOVX access
-EXTERN xdata _AT_(0xE67C) volatile BYTE XAUTODAT2         ;  // Autoptr2 MOVX access
-
-#define EXTAUTODAT1 XAUTODAT1
-#define EXTAUTODAT2 XAUTODAT2
-
-// USB Control
-
-EXTERN xdata _AT_(0xE680) volatile BYTE USBCS             ;  // USB Control & Status
-EXTERN xdata _AT_(0xE681) volatile BYTE SUSPEND           ;  // Put chip into suspend
-EXTERN xdata _AT_(0xE682) volatile BYTE WAKEUPCS          ;  // Wakeup source and polarity
-EXTERN xdata _AT_(0xE683) volatile BYTE TOGCTL            ;  // Toggle Control
-EXTERN xdata _AT_(0xE684) volatile BYTE USBFRAMEH         ;  // USB Frame count H
-EXTERN xdata _AT_(0xE685) volatile BYTE USBFRAMEL         ;  // USB Frame count L
-EXTERN xdata _AT_(0xE686) volatile BYTE MICROFRAME        ;  // Microframe count, 0-7
-EXTERN xdata _AT_(0xE687) volatile BYTE FNADDR            ;  // USB Function address
-
-// Endpoints
-
-EXTERN xdata _AT_(0xE68A) volatile BYTE EP0BCH            ;  // Endpoint 0 Byte Count H
-EXTERN xdata _AT_(0xE68B) volatile BYTE EP0BCL            ;  // Endpoint 0 Byte Count L
-EXTERN xdata _AT_(0xE68D) volatile BYTE EP1OUTBC          ;  // Endpoint 1 OUT Byte Count
-EXTERN xdata _AT_(0xE68F) volatile BYTE EP1INBC           ;  // Endpoint 1 IN Byte Count
-EXTERN xdata _AT_(0xE690) volatile BYTE EP2BCH            ;  // Endpoint 2 Byte Count H
-EXTERN xdata _AT_(0xE691) volatile BYTE EP2BCL            ;  // Endpoint 2 Byte Count L
-EXTERN xdata _AT_(0xE694) volatile BYTE EP4BCH            ;  // Endpoint 4 Byte Count H
-EXTERN xdata _AT_(0xE695) volatile BYTE EP4BCL            ;  // Endpoint 4 Byte Count L
-EXTERN xdata _AT_(0xE698) volatile BYTE EP6BCH            ;  // Endpoint 6 Byte Count H
-EXTERN xdata _AT_(0xE699) volatile BYTE EP6BCL            ;  // Endpoint 6 Byte Count L
-EXTERN xdata _AT_(0xE69C) volatile BYTE EP8BCH            ;  // Endpoint 8 Byte Count H
-EXTERN xdata _AT_(0xE69D) volatile BYTE EP8BCL            ;  // Endpoint 8 Byte Count L
-EXTERN xdata _AT_(0xE6A0) volatile BYTE EP0CS             ;  // Endpoint  Control and Status
-EXTERN xdata _AT_(0xE6A1) volatile BYTE EP1OUTCS          ;  // Endpoint 1 OUT Control and Status
-EXTERN xdata _AT_(0xE6A2) volatile BYTE EP1INCS           ;  // Endpoint 1 IN Control and Status
-EXTERN xdata _AT_(0xE6A3) volatile BYTE EP2CS             ;  // Endpoint 2 Control and Status
-EXTERN xdata _AT_(0xE6A4) volatile BYTE EP4CS             ;  // Endpoint 4 Control and Status
-EXTERN xdata _AT_(0xE6A5) volatile BYTE EP6CS             ;  // Endpoint 6 Control and Status
-EXTERN xdata _AT_(0xE6A6) volatile BYTE EP8CS             ;  // Endpoint 8 Control and Status
-EXTERN xdata _AT_(0xE6A7) volatile BYTE EP2FIFOFLGS       ;  // Endpoint 2 Flags
-EXTERN xdata _AT_(0xE6A8) volatile BYTE EP4FIFOFLGS       ;  // Endpoint 4 Flags
-EXTERN xdata _AT_(0xE6A9) volatile BYTE EP6FIFOFLGS       ;  // Endpoint 6 Flags
-EXTERN xdata _AT_(0xE6AA) volatile BYTE EP8FIFOFLGS       ;  // Endpoint 8 Flags
-EXTERN xdata _AT_(0xE6AB) volatile BYTE EP2FIFOBCH        ;  // EP2 FIFO total byte count H
-EXTERN xdata _AT_(0xE6AC) volatile BYTE EP2FIFOBCL        ;  // EP2 FIFO total byte count L
-EXTERN xdata _AT_(0xE6AD) volatile BYTE EP4FIFOBCH        ;  // EP4 FIFO total byte count H
-EXTERN xdata _AT_(0xE6AE) volatile BYTE EP4FIFOBCL        ;  // EP4 FIFO total byte count L
-EXTERN xdata _AT_(0xE6AF) volatile BYTE EP6FIFOBCH        ;  // EP6 FIFO total byte count H
-EXTERN xdata _AT_(0xE6B0) volatile BYTE EP6FIFOBCL        ;  // EP6 FIFO total byte count L
-EXTERN xdata _AT_(0xE6B1) volatile BYTE EP8FIFOBCH        ;  // EP8 FIFO total byte count H
-EXTERN xdata _AT_(0xE6B2) volatile BYTE EP8FIFOBCL        ;  // EP8 FIFO total byte count L
-EXTERN xdata _AT_(0xE6B3) volatile BYTE SUDPTRH           ;  // Setup Data Pointer high address byte
-EXTERN xdata _AT_(0xE6B4) volatile BYTE SUDPTRL           ;  // Setup Data Pointer low address byte
-EXTERN xdata _AT_(0xE6B5) volatile BYTE SUDPTRCTL         ;  // Setup Data Pointer Auto Mode
-EXTERN xdata _AT_(0xE6B8) volatile BYTE SETUPDAT[8]       ;  // 8 bytes of SETUP data
-
-// GPIF
-
-EXTERN xdata _AT_(0xE6C0) volatile BYTE GPIFWFSELECT      ;  // Waveform Selector
-EXTERN xdata _AT_(0xE6C1) volatile BYTE GPIFIDLECS        ;  // GPIF Done, GPIF IDLE drive mode
-EXTERN xdata _AT_(0xE6C2) volatile BYTE GPIFIDLECTL       ;  // Inactive Bus, CTL states
-EXTERN xdata _AT_(0xE6C3) volatile BYTE GPIFCTLCFG        ;  // CTL OUT pin drive
-EXTERN xdata _AT_(0xE6C4) volatile BYTE GPIFADRH          ;  // GPIF Address H
-EXTERN xdata _AT_(0xE6C5) volatile BYTE GPIFADRL          ;  // GPIF Address L
-
-EXTERN xdata _AT_(0xE6CE) volatile BYTE GPIFTCB3          ;  // GPIF Transaction Count Byte 3
-EXTERN xdata _AT_(0xE6CF) volatile BYTE GPIFTCB2          ;  // GPIF Transaction Count Byte 2
-EXTERN xdata _AT_(0xE6D0) volatile BYTE GPIFTCB1          ;  // GPIF Transaction Count Byte 1
-EXTERN xdata _AT_(0xE6D1) volatile BYTE GPIFTCB0          ;  // GPIF Transaction Count Byte 0
-
-#define EP2GPIFTCH GPIFTCB1   // these are here for backwards compatibility
-#define EP2GPIFTCL GPIFTCB0   // before REVE silicon (ie. REVB and REVD)
-#define EP4GPIFTCH GPIFTCB1   // these are here for backwards compatibility
-#define EP4GPIFTCL GPIFTCB0   // before REVE silicon (ie. REVB and REVD)
-#define EP6GPIFTCH GPIFTCB1   // these are here for backwards compatibility
-#define EP6GPIFTCL GPIFTCB0   // before REVE silicon (ie. REVB and REVD)
-#define EP8GPIFTCH GPIFTCB1   // these are here for backwards compatibility
-#define EP8GPIFTCL GPIFTCB0   // before REVE silicon (ie. REVB and REVD)
-
-// EXTERN xdata volatile BYTE EP2GPIFTCH     _AT_ 0xE6D0;  // EP2 GPIF Transaction Count High
-// EXTERN xdata volatile BYTE EP2GPIFTCL     _AT_ 0xE6D1;  // EP2 GPIF Transaction Count Low
-EXTERN xdata _AT_(0xE6D2) volatile BYTE EP2GPIFFLGSEL     ;  // EP2 GPIF Flag select
-EXTERN xdata _AT_(0xE6D3) volatile BYTE EP2GPIFPFSTOP     ;  // Stop GPIF EP2 transaction on prog. flag
-EXTERN xdata _AT_(0xE6D4) volatile BYTE EP2GPIFTRIG       ;  // EP2 FIFO Trigger
-// EXTERN xdata volatile BYTE EP4GPIFTCH     _AT_ 0xE6D8;  // EP4 GPIF Transaction Count High
-// EXTERN xdata volatile BYTE EP4GPIFTCL     _AT_ 0xE6D9;  // EP4 GPIF Transactionr Count Low
-EXTERN xdata _AT_(0xE6DA) volatile BYTE EP4GPIFFLGSEL     ;  // EP4 GPIF Flag select
-EXTERN xdata _AT_(0xE6DB) volatile BYTE EP4GPIFPFSTOP     ;  // Stop GPIF EP4 transaction on prog. flag
-EXTERN xdata _AT_(0xE6DC) volatile BYTE EP4GPIFTRIG       ;  // EP4 FIFO Trigger
-// EXTERN xdata volatile BYTE EP6GPIFTCH     _AT_ 0xE6E0;  // EP6 GPIF Transaction Count High
-// EXTERN xdata volatile BYTE EP6GPIFTCL     _AT_ 0xE6E1;  // EP6 GPIF Transaction Count Low
-EXTERN xdata _AT_(0xE6E2) volatile BYTE EP6GPIFFLGSEL     ;  // EP6 GPIF Flag select
-EXTERN xdata _AT_(0xE6E3) volatile BYTE EP6GPIFPFSTOP     ;  // Stop GPIF EP6 transaction on prog. flag
-EXTERN xdata _AT_(0xE6E4) volatile BYTE EP6GPIFTRIG       ;  // EP6 FIFO Trigger
-// EXTERN xdata volatile BYTE EP8GPIFTCH     _AT_ 0xE6E8;  // EP8 GPIF Transaction Count High
-// EXTERN xdata volatile BYTE EP8GPIFTCL     _AT_ 0xE6E9;  // EP8GPIF Transaction Count Low
-EXTERN xdata _AT_(0xE6EA) volatile BYTE EP8GPIFFLGSEL     ;  // EP8 GPIF Flag select
-EXTERN xdata _AT_(0xE6EB) volatile BYTE EP8GPIFPFSTOP     ;  // Stop GPIF EP8 transaction on prog. flag
-EXTERN xdata _AT_(0xE6EC) volatile BYTE EP8GPIFTRIG       ;  // EP8 FIFO Trigger
-EXTERN xdata _AT_(0xE6F0) volatile BYTE XGPIFSGLDATH      ;  // GPIF Data H (16-bit mode only)
-EXTERN xdata _AT_(0xE6F1) volatile BYTE XGPIFSGLDATLX     ;  // Read/Write GPIF Data L & trigger transac
-EXTERN xdata _AT_(0xE6F2) volatile BYTE XGPIFSGLDATLNOX   ;  // Read GPIF Data L, no transac trigger
-EXTERN xdata _AT_(0xE6F3) volatile BYTE GPIFREADYCFG      ;  // Internal RDY,Sync/Async, RDY5CFG
-EXTERN xdata _AT_(0xE6F4) volatile BYTE GPIFREADYSTAT     ;  // RDY pin states
-EXTERN xdata _AT_(0xE6F5) volatile BYTE GPIFABORT         ;  // Abort GPIF cycles
-
-// UDMA
-
-EXTERN xdata _AT_(0xE6C6) volatile BYTE FLOWSTATE         ; //Defines GPIF flow state
-EXTERN xdata _AT_(0xE6C7) volatile BYTE FLOWLOGIC         ; //Defines flow/hold decision criteria
-EXTERN xdata _AT_(0xE6C8) volatile BYTE FLOWEQ0CTL        ; //CTL states during active flow state
-EXTERN xdata _AT_(0xE6C9) volatile BYTE FLOWEQ1CTL        ; //CTL states during hold flow state
-EXTERN xdata _AT_(0xE6CA) volatile BYTE FLOWHOLDOFF       ;
-EXTERN xdata _AT_(0xE6CB) volatile BYTE FLOWSTB           ; //CTL/RDY Signal to use as master data strobe 
-EXTERN xdata _AT_(0xE6CC) volatile BYTE FLOWSTBEDGE       ; //Defines active master strobe edge
-EXTERN xdata _AT_(0xE6CD) volatile BYTE FLOWSTBHPERIOD    ; //Half Period of output master strobe
-EXTERN xdata _AT_(0xE60C) volatile BYTE GPIFHOLDAMOUNT    ; //Data delay shift 
-EXTERN xdata _AT_(0xE67D) volatile BYTE UDMACRCH          ; //CRC Upper byte
-EXTERN xdata _AT_(0xE67E) volatile BYTE UDMACRCL          ; //CRC Lower byte
-EXTERN xdata _AT_(0xE67F) volatile BYTE UDMACRCQUAL       ; //UDMA In only, host terminated use only
-
-
-// Debug/Test
-
-EXTERN xdata _AT_(0xE6F8) volatile BYTE DBUG              ;  // Debug
-EXTERN xdata _AT_(0xE6F9) volatile BYTE TESTCFG           ;  // Test configuration
-EXTERN xdata _AT_(0xE6FA) volatile BYTE USBTEST           ;  // USB Test Modes
-EXTERN xdata _AT_(0xE6FB) volatile BYTE CT1               ;  // Chirp Test--Override
-EXTERN xdata _AT_(0xE6FC) volatile BYTE CT2               ;  // Chirp Test--FSM
-EXTERN xdata _AT_(0xE6FD) volatile BYTE CT3               ;  // Chirp Test--Control Signals
-EXTERN xdata _AT_(0xE6FE) volatile BYTE CT4               ;  // Chirp Test--Inputs
-
-// Endpoint Buffers
-
-EXTERN xdata _AT_(0xE740) volatile BYTE EP0BUF[64]        ;  // EP0 IN-OUT buffer
-EXTERN xdata _AT_(0xE780) volatile BYTE EP1OUTBUF[64]     ;  // EP1-OUT buffer
-EXTERN xdata _AT_(0xE7C0) volatile BYTE EP1INBUF[64]      ;  // EP1-IN buffer
-EXTERN xdata _AT_(0xF000) volatile BYTE EP2FIFOBUF[1024]  ;  // 512/1024-byte EP2 buffer (IN or OUT)
-EXTERN xdata _AT_(0xF400) volatile BYTE EP4FIFOBUF[1024]  ;  // 512 byte EP4 buffer (IN or OUT)
-EXTERN xdata _AT_(0xF800) volatile BYTE EP6FIFOBUF[1024]  ;  // 512/1024-byte EP6 buffer (IN or OUT)
-EXTERN xdata _AT_(0xFC00) volatile BYTE EP8FIFOBUF[1024]  ;  // 512 byte EP8 buffer (IN or OUT)
-
-#undef EXTERN
-#undef _AT_
-
-/*-----------------------------------------------------------------------------
-   Special Function Registers (SFRs)
-   The byte registers and bits defined in the following list are based
-   on the Synopsis definition of the 8051 Special Function Registers for EZ-USB. 
-    If you modify the register definitions below, please regenerate the file 
-    "ezregs.inc" which includes the same basic information for assembly inclusion.
------------------------------------------------------------------------------*/
-
-sfr at 0x80 IOA;
-sfr at 0x81 SP;
-sfr at 0x82 DPL;
-sfr at 0x83 DPH;
-sfr at 0x84 DPL1;
-sfr at 0x85 DPH1;
-sfr at 0x86 DPS;
-         /*  DPS  */
-         sbit at 0x86+0 SEL;
-sfr at 0x87 PCON;   /*  PCON  */
-         //sbit IDLE   = 0x87+0;
-         //sbit STOP   = 0x87+1;
-         //sbit GF0    = 0x87+2;
-         //sbit GF1    = 0x87+3;
-         //sbit SMOD0  = 0x87+7;
-sfr at 0x88 TCON;
-         /*  TCON  */
-         sbit at 0x88+0 IT0;
-         sbit at 0x88+1 IE0;
-         sbit at 0x88+2 IT1;
-         sbit at 0x88+3 IE1;
-         sbit at 0x88+4 TR0;
-         sbit at 0x88+5 TF0;
-         sbit at 0x88+6 TR1;
-         sbit at 0x88+7 TF1;
-sfr at 0x89 TMOD;
-         /*  TMOD  */
-         //sbit M00    = 0x89+0;
-         //sbit M10    = 0x89+1;
-         //sbit CT0    = 0x89+2;
-         //sbit GATE0  = 0x89+3;
-         //sbit M01    = 0x89+4;
-         //sbit M11    = 0x89+5;
-         //sbit CT1    = 0x89+6;
-         //sbit GATE1  = 0x89+7;
-sfr at 0x8A TL0;
-sfr at 0x8B TL1;
-sfr at 0x8C TH0;
-sfr at 0x8D TH1;
-sfr at 0x8E CKCON;
-         /*  CKCON  */
-         //sbit MD0    = 0x89+0;
-         //sbit MD1    = 0x89+1;
-         //sbit MD2    = 0x89+2;
-         //sbit T0M    = 0x89+3;
-         //sbit T1M    = 0x89+4;
-         //sbit T2M    = 0x89+5;
-// sfr at 0x8F SPC_FNC; // Was WRS in Reg320
-         /*  CKCON  */
-         //sbit WRS    = 0x8F+0;
-sfr at 0x90 IOB;
-sfr at 0x91 EXIF; // EXIF Bit Values differ from Reg320
-         /*  EXIF  */
-         //sbit USBINT = 0x91+4;
-         //sbit I2CINT = 0x91+5;
-         //sbit IE4    = 0x91+6;
-         //sbit IE5    = 0x91+7;
-sfr at 0x92 MPAGE;
-sfr at 0x98 SCON0;
-         /*  SCON0  */
-         sbit at 0x98+0 RI;
-         sbit at 0x98+1 TI;
-         sbit at 0x98+2 RB8;
-         sbit at 0x98+3 TB8;
-         sbit at 0x98+4 REN;
-         sbit at 0x98+5 SM2;
-         sbit at 0x98+6 SM1;
-         sbit at 0x98+7 SM0;
-sfr at 0x99 SBUF0;
-
-sfr at 0x9A APTR1H;
-sfr at 0x9B APTR1L;
-sfr at 0x9C AUTODAT1; 
-sfr at 0x9D AUTOPTRH2;
-sfr at 0x9E AUTOPTRL2; 
-sfr at 0x9F AUTODAT2;
-sfr at 0xA0 IOC;
-sfr at 0xA1 INT2CLR;
-sfr at 0xA2 INT4CLR;
-
-#define	AUTOPTRH1	APTR1H
-#define	AUTOPTRL1	APTR1L
-
-sfr at 0xA8 IE;
-         /*  IE  */
-         sbit at 0xA8+0 EX0;
-         sbit at 0xA8+1 ET0;
-         sbit at 0xA8+2 EX1;
-         sbit at 0xA8+3 ET1;
-         sbit at 0xA8+4 ES0;
-         sbit at 0xA8+5 ET2;
-         sbit at 0xA8+6 ES1;
-         sbit at 0xA8+7 EA;
-
-sfr at 0xAA EP2468STAT;
-         /* EP2468STAT */
-         //sbit EP2E   = 0xAA+0;
-         //sbit EP2F   = 0xAA+1;
-         //sbit EP4E   = 0xAA+2;
-         //sbit EP4F   = 0xAA+3;
-         //sbit EP6E   = 0xAA+4;
-         //sbit EP6F   = 0xAA+5;
-         //sbit EP8E   = 0xAA+6;
-         //sbit EP8F   = 0xAA+7;
-
-sfr at 0xAB EP24FIFOFLGS;
-sfr at 0xAC EP68FIFOFLGS;
-sfr at 0xAF AUTOPTRSETUP;
-            /* AUTOPTRSETUP */
-            // sbit EXTACC  = 0xAF+0;
-            // sbit APTR1FZ = 0xAF+1;
-            // sbit APTR2FZ = 0xAF+2;
-
-sfr at 0xB0 IOD;
-sfr at 0xB1 IOE;
-sfr at 0xB2 OEA;
-sfr at 0xB3 OEB;
-sfr at 0xB4 OEC;
-sfr at 0xB5 OED;
-sfr at 0xB6 OEE;
-
-sfr at 0xB8 IP;
-         /*  IP  */
-         sbit at 0xB8+0 PX0;
-         sbit at 0xB8+1 PT0;
-         sbit at 0xB8+2 PX1;
-         sbit at 0xB8+3 PT1;
-         sbit at 0xB8+4 PS0;
-         sbit at 0xB8+5 PT2;
-         sbit at 0xB8+6 PS1;
-
-sfr at 0xBA EP01STAT;
-sfr at 0xBB GPIFTRIG;
-                
-sfr at 0xBD GPIFSGLDATH;
-sfr at 0xBE GPIFSGLDATLX;
-sfr at 0xBF GPIFSGLDATLNOX;
-
-sfr at 0xC0 SCON1;
-         /*  SCON1  */
-         sbit at 0xC0+0 RI1;
-         sbit at 0xC0+1 TI1;
-         sbit at 0xC0+2 RB81;
-         sbit at 0xC0+3 TB81;
-         sbit at 0xC0+4 REN1;
-         sbit at 0xC0+5 SM21;
-         sbit at 0xC0+6 SM11;
-         sbit at 0xC0+7 SM01;
-sfr at 0xC1 SBUF1;
-sfr at 0xC8 T2CON;
-         /*  T2CON  */
-	 sbit at 0xC8+0 CP_RL2;
-	 sbit at 0xC8+1 C_T2;
-         sbit at 0xC8+2 TR2;
-         sbit at 0xC8+3 EXEN2;
-         sbit at 0xC8+4 TCLK;
-         sbit at 0xC8+5 RCLK;
-         sbit at 0xC8+6 EXF2;
-         sbit at 0xC8+7 TF2;
-sfr at 0xCA RCAP2L;
-sfr at 0xCB RCAP2H;
-sfr at 0xCC TL2;
-sfr at 0xCD TH2;
-sfr at 0xD0 PSW;
-         /*  PSW  */
-         sbit at 0xD0+0 P;
-         sbit at 0xD0+1 FL;
-         sbit at 0xD0+2 OV;
-         sbit at 0xD0+3 RS0;
-         sbit at 0xD0+4 RS1;
-         sbit at 0xD0+5 F0;
-         sbit at 0xD0+6 AC;
-         sbit at 0xD0+7 CY;
-sfr at 0xD8 EICON; // Was WDCON in DS80C320 EICON; Bit Values differ from Reg320
-         /*  EICON  */
-         sbit at 0xD8+3 INT6;
-         sbit at 0xD8+4 RESI;
-         sbit at 0xD8+5 ERESI;
-         sbit at 0xD8+7 SMOD1;
-sfr at 0xE0 ACC;
-sfr at 0xE8 EIE; // EIE Bit Values differ from Reg320
-                        /*  EIE  */
-         sbit at 0xE8+0 EIUSB;
-         sbit at 0xE8+1 EI2C;
-         sbit at 0xE8+2 EIEX4;
-         sbit at 0xE8+3 EIEX5;
-         sbit at 0xE8+4 EIEX6;
-sfr at 0xF0 B;
-sfr at 0xF8 EIP; // EIP Bit Values differ from Reg320
-                        /*  EIP  */
-         sbit at 0xF8+0 PUSB;
-         sbit at 0xF8+1 PI2C;
-         sbit at 0xF8+2 EIPX4;
-         sbit at 0xF8+3 EIPX5;
-         sbit at 0xF8+4 EIPX6;
-
-/*-----------------------------------------------------------------------------
-   Bit Masks
------------------------------------------------------------------------------*/
-
-#define bmBIT0	1
-#define bmBIT1	2
-#define bmBIT2	4
-#define bmBIT3	8
-#define bmBIT4	16
-#define bmBIT5	32
-#define bmBIT6	64
-#define bmBIT7	128
-
-/* CPU Control & Status Register (CPUCS) */
-#define bmPRTCSTB    bmBIT5
-#define bmCLKSPD     (bmBIT4 | bmBIT3)
-#define bmCLKSPD1    bmBIT4
-#define bmCLKSPD0    bmBIT3
-#define bmCLKINV     bmBIT2
-#define bmCLKOE      bmBIT1
-#define bm8051RES    bmBIT0
-/* Port Alternate Configuration Registers */
-/* Port A (PORTACFG) */
-#define bmFLAGD      bmBIT7
-#define bmINT1       bmBIT1
-#define bmINT0       bmBIT0
-/* Port C (PORTCCFG) */
-#define bmGPIFA7     bmBIT7
-#define bmGPIFA6     bmBIT6
-#define bmGPIFA5     bmBIT5
-#define bmGPIFA4     bmBIT4
-#define bmGPIFA3     bmBIT3
-#define bmGPIFA2     bmBIT2
-#define bmGPIFA1     bmBIT1
-#define bmGPIFA0     bmBIT0
-/* Port E (PORTECFG) */
-#define bmGPIFA8     bmBIT7
-#define bmT2EX       bmBIT6
-#define bmINT6       bmBIT5
-#define bmRXD1OUT    bmBIT4
-#define bmRXD0OUT    bmBIT3
-#define bmT2OUT      bmBIT2
-#define bmT1OUT      bmBIT1
-#define bmT0OUT      bmBIT0
-
-/* I2C Control & Status Register (I2CS) */
-#define bmSTART      bmBIT7
-#define bmSTOP       bmBIT6
-#define bmLASTRD     bmBIT5
-#define bmID         (bmBIT4 | bmBIT3)
-#define bmBERR       bmBIT2
-#define bmACK        bmBIT1
-#define bmDONE       bmBIT0
-/* I2C Control Register (I2CTL) */
-#define bmSTOPIE     bmBIT1
-#define bm400KHZ     bmBIT0
-/* Interrupt 2 (USB) Autovector Register (INT2IVEC) */
-#define bmIV4        bmBIT6
-#define bmIV3        bmBIT5
-#define bmIV2        bmBIT4
-#define bmIV1        bmBIT3
-#define bmIV0        bmBIT2
-/* USB Interrupt Request & Enable Registers (USBIE/USBIRQ) */
-#define bmEP0ACK     bmBIT6
-#define bmHSGRANT    bmBIT5
-#define bmURES       bmBIT4
-#define bmSUSP       bmBIT3
-#define bmSUTOK      bmBIT2
-#define bmSOF        bmBIT1
-#define bmSUDAV      bmBIT0
-/* Breakpoint register (BREAKPT) */
-#define bmBREAK      bmBIT3
-#define bmBPPULSE    bmBIT2
-#define bmBPEN       bmBIT1
-/* Interrupt 2 & 4 Setup (INTSETUP) */
-#define bmAV2EN      bmBIT3
-#define bmINT4IN     bmBIT1
-#define bmAV4EN      bmBIT0
-/* USB Control & Status Register (USBCS) */
-#define bmHSM        bmBIT7
-#define bmDISCON     bmBIT3
-#define bmNOSYNSOF   bmBIT2
-#define bmRENUM      bmBIT1
-#define bmSIGRESUME  bmBIT0
-/* Wakeup Control and Status Register (WAKEUPCS) */
-#define bmWU2        bmBIT7
-#define bmWU         bmBIT6
-#define bmWU2POL     bmBIT5
-#define bmWUPOL      bmBIT4
-#define bmDPEN       bmBIT2
-#define bmWU2EN      bmBIT1
-#define bmWUEN       bmBIT0
-/* End Point 0 Control & Status Register (EP0CS) */
-#define bmHSNAK      bmBIT7
-/* End Point 0-1 Control & Status Registers (EP0CS/EP1OUTCS/EP1INCS) */
-#define bmEPBUSY     bmBIT1
-#define bmEPSTALL    bmBIT0
-/* End Point 2-8 Control & Status Registers (EP2CS/EP4CS/EP6CS/EP8CS) */
-#define bmNPAK       (bmBIT6 | bmBIT5 | bmBIT4)
-#define bmEPFULL     bmBIT3
-#define bmEPEMPTY    bmBIT2
-/* Endpoint Status (EP2468STAT) SFR bits */
-#define bmEP8FULL    bmBIT7
-#define bmEP8EMPTY   bmBIT6
-#define bmEP6FULL    bmBIT5
-#define bmEP6EMPTY   bmBIT4
-#define bmEP4FULL    bmBIT3
-#define bmEP4EMPTY   bmBIT2
-#define bmEP2FULL    bmBIT1
-#define bmEP2EMPTY   bmBIT0
-/* SETUP Data Pointer Auto Mode (SUDPTRCTL) */
-#define bmSDPAUTO    bmBIT0
-/* Endpoint Data Toggle Control (TOGCTL) */
-#define bmQUERYTOGGLE  bmBIT7
-#define bmSETTOGGLE    bmBIT6
-#define bmRESETTOGGLE  bmBIT5
-#define bmTOGCTLEPMASK bmBIT3 | bmBIT2 | bmBIT1 | bmBIT0
-/* IBN (In Bulk Nak) enable and request bits (IBNIE/IBNIRQ) */
-#define bmEP8IBN     bmBIT5
-#define bmEP6IBN     bmBIT4
-#define bmEP4IBN     bmBIT3
-#define bmEP2IBN     bmBIT2
-#define bmEP1IBN     bmBIT1
-#define bmEP0IBN     bmBIT0
-
-/* PING-NAK enable and request bits (NAKIE/NAKIRQ) */
-#define bmEP8PING     bmBIT7
-#define bmEP6PING     bmBIT6
-#define bmEP4PING     bmBIT5
-#define bmEP2PING     bmBIT4
-#define bmEP1PING     bmBIT3
-#define bmEP0PING     bmBIT2
-#define bmIBN         bmBIT0
-
-/* Interface Configuration bits (IFCONFIG) */
-#define bmIFCLKSRC    bmBIT7		// set == INTERNAL
-#define bm3048MHZ     bmBIT6		// set == 48 MHz
-#define bmIFCLKOE     bmBIT5
-#define bmIFCLKPOL    bmBIT4
-#define bmASYNC       bmBIT3
-#define bmGSTATE      bmBIT2
-#define bmIFCFG1      bmBIT1
-#define bmIFCFG0      bmBIT0
-#define bmIFCFGMASK   (bmIFCFG0 | bmIFCFG1)
-#define bmIFGPIF      bmIFCFG1
-
-/* EP 2468 FIFO Configuration bits (EP2FIFOCFG,EP4FIFOCFG,EP6FIFOCFG,EP8FIFOCFG) */
-#define bmINFM       bmBIT6
-#define bmOEP        bmBIT5
-#define bmAUTOOUT    bmBIT4
-#define bmAUTOIN     bmBIT3
-#define bmZEROLENIN  bmBIT2
-//   must be zero    bmBIT1
-#define bmWORDWIDE   bmBIT0
-
-/* EP 24 FIFO Flag bits (EP24FIFOFLGS) */
-#define EP2FIFOEMPTY bmBIT1
-#define EP4FIFOEMPTY bmBIT5
-
-/*
- * Chip Revision Control Bits (REVCTL) - used to ebable/disable revision specific features
- */ 
-#define bmNOAUTOARM    bmBIT1	// these don't match the docs
-#define bmSKIPCOMMIT   bmBIT0	// these don't match the docs
-
-#define	bmDYN_OUT      bmBIT1	// these do...
-#define	bmENH_PKT      bmBIT0
-
-
-/* Fifo Reset bits (FIFORESET) */
-#define bmNAKALL       bmBIT7
-
-/* Endpoint Configuration (EPxCFG) */
-#define	bmVALID		bmBIT7
-#define	bmIN		bmBIT6
-#define	bmTYPE1		bmBIT5
-#define	bmTYPE0		bmBIT4
-#define	  bmISOCHRONOUS		bmTYPE0
-#define	  bmBULK		bmTYPE1
-#define	  bmINTERRUPT	       (bmTYPE1 | bmTYPE0)
-#define	bm1KBUF		bmBIT3
-#define	bmBUF1		bmBIT1
-#define	bmBUF0		bmBIT0
-#define	  bmQUADBUF		0
-#define	  bmINVALIDBUF		bmBUF0
-#define	  bmDOUBLEBUF		bmBUF1
-#define	  bmTRIPLEBUF		(bmBUF1 | bmBUF0)
-
-/* OUTPKTEND */
-#define	bmSKIP		bmBIT7	// low 4 bits specify which end point
-
-/* GPIFTRIG defs */
-#define	bmGPIF_IDLE		bmBIT7		// status bit
-
-#define	bmGPIF_EP2_START     	     0
-#define	bmGPIF_EP4_START             1
-#define	bmGPIF_EP6_START             2
-#define	bmGPIF_EP8_START             3
-#define	bmGPIF_READ		bmBIT2
-#define	bmGPIF_WRITE		     0
-
-/* EXIF bits */
-#define	bmEXIF_USBINT		bmBIT4
-#define	bmEXIF_I2CINT		bmBIT5
-#define	bmEXIF_IE4		bmBIT6
-#define	bmEXIF_IE5		bmBIT7
-
-
-#endif   /* FX2REGS_H */

firmware/fx2/common/fx2utils.c

@@ -1,54 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "fx2utils.h"
-#include "fx2regs.h"
-#include "delay.h"
-
-void
-fx2_stall_ep0 (void)
-{
-  EP0CS |= bmEPSTALL;
-}
-
-void
-fx2_reset_data_toggle (unsigned char ep)
-{
-  TOGCTL = ((ep & 0x80) >> 3 | (ep & 0x0f));
-  TOGCTL |= bmRESETTOGGLE;
-}
-
-void
-fx2_renumerate (void)
-{
-  USBCS |= bmDISCON | bmRENUM;
-
-  // mdelay (1500);		// FIXME why 1.5 seconds?
-  mdelay (250);			// FIXME why 1.5 seconds?
-  
-  USBIRQ = 0xff;		// clear any pending USB irqs...
-  EPIRQ =  0xff;		//   they're from before the renumeration
-
-  EXIF &= ~bmEXIF_USBINT;
-
-  USBCS &= ~bmDISCON;		// reconnect USB
-}

firmware/fx2/common/fx2utils.h

@@ -1,31 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-#ifndef _FX2UTILS_H_
-#define _FX2UTILS_H_
-
-void fx2_stall_ep0 (void);
-void fx2_reset_data_toggle (unsigned char ep);
-void fx2_renumerate (void);
-
-
-
-#endif /* _FX2UTILS_H_ */

firmware/fx2/common/i2c.c

@@ -1,123 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "i2c.h"
-#include "fx2regs.h"
-#include <string.h>
-
-
-// issue a stop bus cycle and wait for completion
-
-
-// returns non-zero if successful, else 0
-unsigned char
-i2c_read (unsigned char addr, xdata unsigned char *buf, unsigned char len)
-{
-  volatile unsigned char	junk;
-  
-  if (len == 0)			// reading zero bytes always works
-    return 1;
-  
-  while (I2CS & bmSTOP)		// wait for stop to clear
-    ;
-
-  I2CS = bmSTART;
-  I2DAT = (addr << 1) | 1;	// write address and direction (1's the read bit)
-
-  while ((I2CS & bmDONE) == 0)
-    ;
-
-  if ((I2CS & bmBERR) || (I2CS & bmACK) == 0)	// no device answered...
-    goto fail;
-
-  if (len == 1)
-    I2CS |= bmLASTRD;		
-
-  junk = I2DAT;			// trigger the first read cycle
-
-  while (--len != 0){
-    while ((I2CS & bmDONE) == 0)
-      ;
-
-    if (I2CS & bmBERR)
-      goto fail;
-
-    if (len == 1)
-      I2CS |= bmLASTRD;
-    
-    *buf++ = I2DAT;		// get data, trigger another read
-  }
-
-  // wait for final byte
-  
-  while ((I2CS & bmDONE) == 0)
-    ;
-  
-  if (I2CS & bmBERR)
-    goto fail;
-
-  I2CS |= bmSTOP;
-  *buf = I2DAT;
-
-  return 1;
-
- fail:
-  I2CS |= bmSTOP;
-  return 0;
-}
-
-
-
-// returns non-zero if successful, else 0
-unsigned char
-i2c_write (unsigned char addr, xdata const unsigned char *buf, unsigned char len)
-{
-  while (I2CS & bmSTOP)		// wait for stop to clear
-    ;
-
-  I2CS = bmSTART;
-  I2DAT = (addr << 1) | 0;	// write address and direction (0's the write bit)
-
-  while ((I2CS & bmDONE) == 0)
-    ;
-
-  if ((I2CS & bmBERR) || (I2CS & bmACK) == 0)	// no device answered...
-    goto fail;
-
-  while (len > 0){
-    I2DAT = *buf++;
-    len--;
-
-    while ((I2CS & bmDONE) == 0)
-      ;
-
-    if ((I2CS & bmBERR) || (I2CS & bmACK) == 0)	// no device answered...
-      goto fail;
-  }
-
-  I2CS |= bmSTOP;
-  return 1;
-
- fail:
-  I2CS |= bmSTOP;
-  return 0;
-}

firmware/fx2/common/i2c.h

@@ -1,32 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef _I2C_H_
-#define _I2C_H_
-
-// returns non-zero if successful, else 0
-unsigned char i2c_read (unsigned char addr, xdata unsigned char *buf, unsigned char len);
-
-// returns non-zero if successful, else 0
-unsigned char i2c_write (unsigned char addr, xdata const unsigned char *buf, unsigned char len);
-
-#endif /* _I2C_H_ */

firmware/fx2/common/init_gpif.c

@@ -1,59 +0,0 @@
-/*
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-
-// These are the tables generated by the Cypress GPIF Designer
-
-extern const char WaveData[128];
-extern const char FlowStates[36];
-extern const char InitData[7];
-
-// The tool is kind of screwed up, in that it doesn't configure some
-// of the ports correctly.  We just use their tables and handle the
-// initialization ourselves.  They also declare that their static
-// initialized data is in xdata, which screws us too.
-
-void
-init_gpif (void)
-{
-  // we've already setup IFCONFIG before calling this...
-
-  GPIFABORT = 0xFF;  // abort any waveforms pending
-  SYNCDELAY;
- 
-  GPIFREADYCFG = InitData[ 0 ];
-  GPIFCTLCFG = InitData[ 1 ];
-  GPIFIDLECS = InitData[ 2 ];
-  GPIFIDLECTL = InitData[ 3 ];
-  // Hmmm, what's InitData[ 4 ] ...
-  GPIFWFSELECT = InitData[ 5 ];
-  // GPIFREADYSTAT = InitData[ 6 ];	// I think this register is read only...
- 
-  {
-    BYTE i;
-    
-    for (i = 0; i < 128; i++){
-      GPIF_WAVE_DATA[i] = WaveData[i];
-    }
-  }
- 
-  FLOWSTATE = 0;		/* ensure it's off */
-}

firmware/fx2/common/isr.c

@@ -1,167 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "isr.h"
-#include "fx2regs.h"
-#include "syncdelay.h"
-
-extern xdata unsigned char _standard_interrupt_vector[];
-extern xdata unsigned char _usb_autovector[];
-extern xdata unsigned char _fifo_gpif_autovector[];
-
-#define LJMP_OPCODE	0x02
-
-/*
- * Hook standard interrupt vector.
- *
- * vector_number is from the SV_<foo> list.
- * addr is the address of the interrupt service routine.
- */
-void 
-hook_sv (unsigned char vector_number, unsigned short addr)
-{
-  bit	t;
-  
-  // sanity checks
-
-  if (vector_number < SV_MIN || vector_number > SV_MAX)
-    return;
-
-  if ((vector_number & 0x0f) != 0x03 && (vector_number & 0x0f) != 0x0b)
-    return;
-
-  t = EA;
-  EA = 0;
-  _standard_interrupt_vector[vector_number] = LJMP_OPCODE;
-  _standard_interrupt_vector[vector_number + 1] = addr >> 8;
-  _standard_interrupt_vector[vector_number + 2] = addr & 0xff;
-  EA = t;
-}
-
-/*
- * Hook usb interrupt vector.
- *
- * vector_number is from the UV_<foo> list.
- * addr is the address of the interrupt service routine.
- */
-void 
-hook_uv (unsigned char vector_number, unsigned short addr)
-{
-  bit	t;
-  
-  // sanity checks
-
-  if (vector_number < UV_MIN || vector_number > UV_MAX)
-    return;
-
-  if ((vector_number & 0x3) != 0)
-    return;
-
-  t = EA;
-  EA = 0;
-  _usb_autovector[vector_number] = LJMP_OPCODE;
-  _usb_autovector[vector_number + 1] = addr >> 8;
-  _usb_autovector[vector_number + 2] = addr & 0xff;
-  EA = t;
-}
-
-/*
- * Hook fifo/gpif interrupt vector.
- *
- * vector_number is from the FGV_<foo> list.
- * addr is the address of the interrupt service routine.
- */
-void 
-hook_fgv (unsigned char vector_number, unsigned short addr)
-{
-  bit	t;
-  
-  // sanity checks
-
-  if (vector_number < FGV_MIN || vector_number > FGV_MAX)
-    return;
-
-  if ((vector_number & 0x3) != 0)
-    return;
-
-  t = EA;
-  EA = 0;
-  _fifo_gpif_autovector[vector_number] = LJMP_OPCODE;
-  _fifo_gpif_autovector[vector_number + 1] = addr >> 8;
-  _fifo_gpif_autovector[vector_number + 2] = addr & 0xff;
-  EA = t;
-}
-
-/*
- * One time call to enable autovectoring for both USB and FIFO/GPIF.
- *
- * This disables all USB and FIFO/GPIF interrupts and clears
- * any pending interrupts too.  It leaves the master USB and FIFO/GPIF
- * interrupts enabled.
- */
-void
-setup_autovectors (void)
-{
-  // disable master usb and fifo/gpif interrupt enables
-  EIUSB = 0;
-  EIEX4 = 0;
-
-  hook_sv (SV_INT_2, (unsigned short) _usb_autovector);
-  hook_sv (SV_INT_4, (unsigned short) _fifo_gpif_autovector);
-
-  // disable all fifo interrupt enables
-  SYNCDELAY;
-  EP2FIFOIE = 0;	SYNCDELAY;
-  EP4FIFOIE = 0;	SYNCDELAY;
-  EP6FIFOIE = 0;	SYNCDELAY;
-  EP8FIFOIE = 0;	SYNCDELAY;
-
-  // clear all pending fifo irqs	
-  EP2FIFOIRQ = 0xff;	SYNCDELAY;
-  EP4FIFOIRQ = 0xff;	SYNCDELAY;
-  EP6FIFOIRQ = 0xff;	SYNCDELAY;
-  EP8FIFOIRQ = 0xff;	SYNCDELAY;
-
-  IBNIE  = 0;
-  IBNIRQ = 0xff;
-  NAKIE  = 0;
-  NAKIRQ = 0xff;
-  USBIE  = 0;
-  USBIRQ = 0xff;
-  EPIE   = 0;
-  EPIRQ  = 0xff;
-  SYNCDELAY;	GPIFIE = 0;		
-  SYNCDELAY;	GPIFIRQ = 0xff;
-  USBERRIE = 0;
-  USBERRIRQ = 0xff;
-  CLRERRCNT = 0;
-  
-  INTSETUP = bmAV2EN | bmAV4EN | bmINT4IN;
-
-  // clear master irq's for usb and fifo/gpif
-  EXIF &= ~bmEXIF_USBINT;
-  EXIF &= ~bmEXIF_IE4;
-  
-  // enable master usb and fifo/gpif interrrupts
-  EIUSB = 1;
-  EIEX4 = 1;
-}

firmware/fx2/common/isr.h

@@ -1,172 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef _ISR_H_
-#define _ISR_H_
-
-/*
- * ----------------------------------------------------------------
- *	routines for managing interrupt services routines
- * ----------------------------------------------------------------
- */
-
-/*
- * The FX2 has three discrete sets of interrupt vectors.
- * The first set is the standard 8051 vector (13 8-byte entries).
- * The second set is USB interrupt autovector (32 4-byte entries).
- * The third set is the FIFO/GPIF autovector (14 4-byte entries).
- *
- * Since all the code we're running in the FX2 is ram based, we
- * forego the typical "initialize the interrupt vectors at link time"
- * strategy, in favor of calls at run time that install the correct
- * pointers to functions.
- */
-
-/*
- * Standard Vector numbers
- */
-
-#define	SV_INT_0		0x03
-#define	SV_TIMER_0		0x0b
-#define	SV_INT_1		0x13
-#define	SV_TIMER_1		0x1b
-#define	SV_SERIAL_0		0x23
-#define	SV_TIMER_2		0x2b
-#define	SV_RESUME		0x33
-#define	SV_SERIAL_1		0x3b
-#define	SV_INT_2		0x43		// (INT_2) points at USB autovector
-#define	SV_I2C			0x4b
-#define	SV_INT_4		0x53		// (INT_4) points at FIFO/GPIF autovector
-#define	SV_INT_5		0x5b
-#define	SV_INT_6		0x63
-
-#define	SV_MIN			SV_INT_0
-#define	SV_MAX			SV_INT_6
-
-/*
- * USB Auto Vector numbers
- */
-
-#define	UV_SUDAV		0x00
-#define	UV_SOF			0x04
-#define	UV_SUTOK		0x08
-#define	UV_SUSPEND		0x0c
-#define	UV_USBRESET		0x10
-#define	UV_HIGHSPEED		0x14
-#define	UV_EP0ACK		0x18
-#define	UV_SPARE_1C		0x1c
-#define	UV_EP0IN		0x20
-#define	UV_EP0OUT		0x24
-#define	UV_EP1IN		0x28
-#define	UV_EP1OUT		0x2c
-#define	UV_EP2			0x30
-#define	UV_EP4			0x34
-#define	UV_EP6			0x38
-#define	UV_EP8			0x3c
-#define	UV_IBN			0x40
-#define	UV_SPARE_44		0x44
-#define	UV_EP0PINGNAK		0x48
-#define	UV_EP1PINGNAK		0x4c
-#define	UV_EP2PINGNAK		0x50
-#define	UV_EP4PINGNAK		0x54
-#define	UV_EP6PINGNAK		0x58
-#define	UV_EP8PINGNAK		0x5c
-#define	UV_ERRLIMIT		0x60
-#define	UV_SPARE_64		0x64
-#define	UV_SPARE_68		0x68
-#define	UV_SPARE_6C		0x6c
-#define	UV_EP2ISOERR		0x70
-#define	UV_EP4ISOERR		0x74
-#define	UV_EP6ISOERR		0x78
-#define	UV_EP8ISOERR		0x7c
-
-#define	UV_MIN			UV_SUDAV
-#define	UV_MAX			UV_EP8ISOERR
-
-/*
- * FIFO/GPIF Auto Vector numbers
- */
-
-#define	FGV_EP2PF		0x00
-#define	FGV_EP4PF		0x04
-#define	FGV_EP6PF		0x08
-#define	FGV_EP8PF		0x0c
-#define	FGV_EP2EF		0x10
-#define	FGV_EP4EF		0x14
-#define	FGV_EP6EF		0x18
-#define	FGV_EP8EF		0x1c
-#define	FGV_EP2FF		0x20
-#define	FGV_EP4FF		0x24
-#define	FGV_EP6FF		0x28
-#define	FGV_EP8FF		0x2c
-#define	FGV_GPIFDONE		0x30
-#define	FGV_GPIFWF		0x34
-
-#define	FGV_MIN			FGV_EP2PF
-#define	FGV_MAX			FGV_GPIFWF
-
-
-/*
- * Hook standard interrupt vector.
- *
- * vector_number is from the SV_<foo> list above.
- * addr is the address of the interrupt service routine.
- */
-void hook_sv (unsigned char vector_number, unsigned short addr);
-
-/*
- * Hook usb interrupt vector.
- *
- * vector_number is from the UV_<foo> list above.
- * addr is the address of the interrupt service routine.
- */
-void hook_uv (unsigned char vector_number, unsigned short addr);
-
-/*
- * Hook fifo/gpif interrupt vector.
- *
- * vector_number is from the FGV_<foo> list above.
- * addr is the address of the interrupt service routine.
- */
-void hook_fgv (unsigned char vector_number, unsigned short addr);
-
-/*
- * One time call to enable autovectoring for both USB and FIFO/GPIF
- */
-void setup_autovectors (void);
-
-
-/*
- * Must be called in each usb interrupt handler
- */
-#define	clear_usb_irq()			\
-	EXIF &= ~bmEXIF_USBINT;		\
-	INT2CLR = 0
-
-/*
- * Must be calledin each fifo/gpif interrupt handler
- */
-#define	clear_fifo_gpif_irq()		\
-	EXIF &= ~bmEXIF_IE4;		\
-	INT4CLR = 0
-
-#endif /* _ISR_H_ */

firmware/fx2/common/spi.c

@@ -1,381 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004,2006 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "spi.h"
-#include "usrp_regs.h"
-
-static void
-setup_enables (unsigned char enables)
-{
-  // Software eanbles are active high.
-  // Hardware enables are active low.
-
-  // Uhh, the CODECs are active low, but the FPGA is active high...
-  enables ^= SPI_ENABLE_FPGA;
-
-  // KLUDGE: This code is fragile, but reasonably fast...
-  // low three bits of enables go into port A
-  USRP_PA = USRP_PA | (0x7 << 3);	// disable FPGA, CODEC_A, CODEC_B
-  USRP_PA ^= (enables & 0x7) << 3;	// enable specified devs
-
-  // high four bits of enables go into port E
-  USRP_PE = USRP_PE | (0xf << 4);	// disable TX_A, RX_A, TX_B, RX_B
-  USRP_PE ^= (enables & 0xf0);		// enable specified devs
-}
-
-#define disable_all()	setup_enables (0)
-
-void
-init_spi (void)
-{
-  disable_all ();		/* disable all devs	  */
-  bitS_OUT = 0;			/* idle state has CLK = 0 */
-}
-
-#if 0
-static unsigned char
-count_bits8 (unsigned char v)
-{
-  static unsigned char count4[16] = {
-    0,	// 0
-    1,	// 1
-    1,	// 2
-    2,	// 3
-    1,	// 4
-    2,	// 5
-    2,	// 6
-    3,	// 7
-    1,	// 8
-    2,	// 9
-    2,	// a
-    3,	// b
-    2,	// c
-    3,	// d
-    3,	// e
-    4	// f
-  };
-  return count4[v & 0xf] + count4[(v >> 4) & 0xf];
-}
-
-#else
-
-static unsigned char
-count_bits8 (unsigned char v)
-{
-  unsigned char count = 0;
-  if (v & (1 << 0)) count++;
-  if (v & (1 << 1)) count++;
-  if (v & (1 << 2)) count++;
-  if (v & (1 << 3)) count++;
-  if (v & (1 << 4)) count++;
-  if (v & (1 << 5)) count++;
-  if (v & (1 << 6)) count++;
-  if (v & (1 << 7)) count++;
-  return count;
-}
-#endif
-
-static void
-write_byte_msb (unsigned char v);
-
-static void
-write_bytes_msb (const xdata unsigned char *buf, unsigned char len);
-
-static void
-read_bytes_msb (xdata unsigned char *buf, unsigned char len);
-
-  
-// returns non-zero if successful, else 0
-unsigned char
-spi_read (unsigned char header_hi, unsigned char header_lo,
-	  unsigned char enables, unsigned char format,
-	  xdata unsigned char *buf, unsigned char len)
-{
-  if (count_bits8 (enables) > 1)
-    return 0;		// error, too many enables set
-
-  setup_enables (enables);
-
-  if (format & SPI_FMT_LSB){		// order: LSB
-#if 1
-    return 0;		// error, not implemented
-#else
-    switch (format & SPI_FMR_HDR_MASK){
-    case SPI_FMT_HDR_0:
-      break;
-    case SPI_FMT_HDR_1:
-      write_byte_lsb (header_lo);
-      break;
-    case SPI_FMT_HDR_2:
-      write_byte_lsb (header_lo);
-      write_byte_lsb (header_hi);
-      break;
-    default:
-      return 0;		// error
-    }
-    if (len != 0)
-      read_bytes_lsb (buf, len);
-#endif
-  }
-
-  else {		// order: MSB
-
-    switch (format & SPI_FMT_HDR_MASK){
-    case SPI_FMT_HDR_0:
-      break;
-    case SPI_FMT_HDR_1:
-      write_byte_msb (header_lo);
-      break;
-    case SPI_FMT_HDR_2:
-      write_byte_msb (header_hi);
-      write_byte_msb (header_lo);
-      break;
-    default:
-      return 0;		// error
-    }
-    if (len != 0)
-      read_bytes_msb (buf, len);
-  }
-
-  disable_all ();
-  return 1;		// success
-}
-
-
-// returns non-zero if successful, else 0
-unsigned char
-spi_write (unsigned char header_hi, unsigned char header_lo,
-	   unsigned char enables, unsigned char format,
-	   const xdata unsigned char *buf, unsigned char len)
-{
-  setup_enables (enables);
-
-  if (format & SPI_FMT_LSB){		// order: LSB
-#if 1
-    return 0;		// error, not implemented
-#else
-    switch (format & SPI_FMR_HDR_MASK){
-    case SPI_FMT_HDR_0:
-      break;
-    case SPI_FMT_HDR_1:
-      write_byte_lsb (header_lo);
-      break;
-    case SPI_FMT_HDR_2:
-      write_byte_lsb (header_lo);
-      write_byte_lsb (header_hi);
-      break;
-    default:
-      return 0;		// error
-    }
-    if (len != 0)
-      write_bytes_lsb (buf, len);
-#endif
-  }
-
-  else {		// order: MSB
-
-    switch (format & SPI_FMT_HDR_MASK){
-    case SPI_FMT_HDR_0:
-      break;
-    case SPI_FMT_HDR_1:
-      write_byte_msb (header_lo);
-      break;
-    case SPI_FMT_HDR_2:
-      write_byte_msb (header_hi);
-      write_byte_msb (header_lo);
-      break;
-    default:
-      return 0;		// error
-    }
-    if (len != 0)
-      write_bytes_msb (buf, len);
-  }
-
-  disable_all ();
-  return 1;		// success
-}
-
-// ----------------------------------------------------------------
-
-static void
-write_byte_msb (unsigned char v)
-{
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-}
-
-static void
-write_bytes_msb (const xdata unsigned char *buf, unsigned char len)
-{
-  while (len-- != 0){
-    write_byte_msb (*buf++);
-  }
-}
-
-#if 0
-/*
- * This is incorrectly compiled by SDCC 2.4.0
- */
-static unsigned char
-read_byte_msb (void)
-{
-  unsigned char v = 0;
-
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  return v;
-}
-#else
-static unsigned char
-read_byte_msb (void) _naked
-{
-  _asm
-	clr	a
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	mov	dpl,a
-	ret
-  _endasm;
-}
-#endif
-
-static void
-read_bytes_msb (xdata unsigned char *buf, unsigned char len)
-{
-  while (len-- != 0){
-    *buf++ = read_byte_msb ();
-  }
-}
-

firmware/fx2/common/spi.h

@@ -1,43 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef INCLUDED_SPI_H
-#define INCLUDED_SPI_H
-
-#include "usrp_spi_defs.h"
-
-void init_spi (void);		// one time call to init
-
-// returns non-zero if successful, else 0
-unsigned char
-spi_read (unsigned char header_hi, unsigned char header_lo,
-	  unsigned char enables, unsigned char format,
-	  xdata unsigned char *buf, unsigned char len);
-
-// returns non-zero if successful, else 0
-unsigned char
-spi_write (unsigned char header_hi, unsigned char header_lo,
-	   unsigned char enables, unsigned char format,
-	   const xdata unsigned char *buf, unsigned char len);
-
-
-#endif /* INCLUDED_SPI_H */

firmware/fx2/common/syncdelay.h

@@ -1,65 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-#ifndef _SYNCDELAY_H_
-#define _SYNCDELAY_H_
-
-/*
- * Magic delay required between access to certain xdata registers (TRM page 15-106).
- * For our configuration, 48 MHz FX2 / 48 MHz IFCLK, we need three cycles.  Each
- * NOP is a single cycle....
- *
- * From TRM page 15-105:
- *
- * Under certain conditions, some read and write access to the FX2 registers must
- * be separated by a "synchronization delay".  The delay is necessary only under the
- * following conditions:
- *
- *   - between a write to any register in the 0xE600 - 0xE6FF range and a write to one
- *     of the registers listed below.
- *
- *   - between a write to one of the registers listed below and a read from any register
- *     in the 0xE600 - 0xE6FF range.
- *
- *   Registers which require a synchronization delay:
- *
- *	FIFORESET			FIFOPINPOLAR
- *	INPKTEND			EPxBCH:L
- *	EPxFIFOPFH:L			EPxAUTOINLENH:L
- *	EPxFIFOCFG			EPxGPIFFLGSEL
- *	PINFLAGSAB			PINFLAGSCD
- *	EPxFIFOIE			EPxFIFOIRQ
- *	GPIFIE				GPIFIRQ
- *	UDMACRCH:L			GPIFADRH:L
- *	GPIFTRIG			EPxGPIFTRIG
- *	OUTPKTEND			REVCTL
- *	GPIFTCB3			GPIFTCB2
- *	GPIFTCB1			GPIFTCB0
- */
-
-/*
- * FIXME ensure that the peep hole optimizer isn't screwing us
- */
-#define	SYNCDELAY	_asm nop; nop; nop; _endasm
-#define	NOP		_asm nop; _endasm
-
-
-#endif /* _SYNCDELAY_H_ */

firmware/fx2/common/timer.c

@@ -1,49 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "timer.h"
-#include "fx2regs.h"
-#include "isr.h"
-
-/*
- * Arrange to have isr_tick_handler called at 100 Hz.
- *
- * The cpu clock is running at 48e6.  The input to the timer
- * is 48e6 / 12 = 4e6.
- *
- * We arrange to have the timer overflow every 40000 clocks == 100 Hz
- */
-
-#define	RELOAD_VALUE	((unsigned short) -40000)
-
-void 
-hook_timer_tick (unsigned short isr_tick_handler)
-{
-  ET2 = 0;			// disable timer 2 interrupts
-  hook_sv (SV_TIMER_2, isr_tick_handler);
-  
-  RCAP2H = RELOAD_VALUE >> 8;	// setup the auto reload value
-  RCAP2L = RELOAD_VALUE;
-
-  T2CON = 0x04;			// interrupt on overflow; reload; run
-  ET2 = 1;			// enable timer 2 interrupts
-}

firmware/fx2/common/timer.h

@@ -1,35 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef _TIMER_H_
-#define _TIMER_H_
-
-/*
- * Arrange to have isr_tick_handler called at 100 Hz
- */
-void hook_timer_tick (unsigned short isr_tick_handler);
-
-#define clear_timer_irq()  				\
-	TF2 = 0 	/* clear overflow flag */
-
-
-#endif /* _TIMER_H_ */

firmware/fx2/common/usb_common.c

@@ -1,386 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "usb_common.h"
-#include "fx2regs.h"
-#include "syncdelay.h"
-#include "fx2utils.h"
-#include "isr.h"
-#include "usb_descriptors.h"
-#include "usb_requests.h"
-
-extern xdata char str0[];
-extern xdata char str1[];
-extern xdata char str2[];
-extern xdata char str3[];
-extern xdata char str4[];
-extern xdata char str5[];
-
-
-#define	bRequestType	SETUPDAT[0]
-#define	bRequest	SETUPDAT[1]
-#define	wValueL		SETUPDAT[2]
-#define	wValueH		SETUPDAT[3]
-#define	wIndexL		SETUPDAT[4]
-#define	wIndexH		SETUPDAT[5]
-#define	wLengthL	SETUPDAT[6]
-#define	wLengthH	SETUPDAT[7]
-
-#define MSB(x)	(((unsigned short) x) >> 8)
-#define LSB(x)	(((unsigned short) x) & 0xff)
-
-volatile bit _usb_got_SUDAV;
-
-unsigned char	_usb_config = 0;
-unsigned char	_usb_alt_setting = 0;	// FIXME really 1/interface
-
-xdata unsigned char *current_device_descr;
-xdata unsigned char *current_devqual_descr;
-xdata unsigned char *current_config_descr;
-xdata unsigned char *other_config_descr;
-
-static void
-setup_descriptors (void)
-{
-  if (USBCS & bmHSM){		// high speed mode
-    current_device_descr  = high_speed_device_descr;
-    current_devqual_descr = high_speed_devqual_descr;
-    current_config_descr  = high_speed_config_descr;
-    other_config_descr    = full_speed_config_descr;
-  }
-  else {
-    current_device_descr  = full_speed_device_descr;
-    current_devqual_descr = full_speed_devqual_descr;
-    current_config_descr  = full_speed_config_descr;
-    other_config_descr    = high_speed_config_descr;
-  }
-
-  // whack the type fields
-  // FIXME, may not be required.
-  // current_config_descr[1] = DT_CONFIG;
-  // other_config_descr[1]   = DT_OTHER_SPEED;
-}
-
-static void
-isr_SUDAV (void) interrupt
-{
-  clear_usb_irq ();
-  _usb_got_SUDAV = 1;
-}
-
-static void
-isr_USBRESET (void) interrupt
-{
-  clear_usb_irq ();
-  setup_descriptors ();
-}
-
-static void
-isr_HIGHSPEED (void) interrupt
-{
-  clear_usb_irq ();
-  setup_descriptors ();
-}
-
-void
-usb_install_handlers (void)
-{
-  setup_descriptors ();	    // ensure that they're set before use
-
-  hook_uv (UV_SUDAV,     (unsigned short) isr_SUDAV);
-  hook_uv (UV_USBRESET,  (unsigned short) isr_USBRESET);
-  hook_uv (UV_HIGHSPEED, (unsigned short) isr_HIGHSPEED);
-
-  USBIE = bmSUDAV | bmURES | bmHSGRANT;
-}
-
-// On the FX2 the only plausible endpoints are 0, 1, 2, 4, 6, 8
-// This doesn't check to see that they're enabled
-
-unsigned char
-plausible_endpoint (unsigned char ep)
-{
-  ep &= ~0x80;	// ignore direction bit
-
-  if (ep > 8)
-    return 0;
-
-  if (ep == 1)
-    return 1;
-
-  return (ep & 0x1) == 0;	// must be even
-}
-
-// return pointer to control and status register for endpoint.
-// only called with plausible_endpoints
-
-xdata volatile unsigned char *
-epcs (unsigned char ep)
-{
-  if (ep == 0x01)		// ep1 has different in and out CS regs
-    return EP1OUTCS;
-
-  if (ep == 0x81)
-    return EP1INCS;
-
-  ep &= ~0x80;			// ignore direction bit
-
-  if (ep == 0x00)		// ep0
-    return EP0CS;
-
-  return EP2CS + (ep >> 1);	// 2, 4, 6, 8 are consecutive
-}
-
-void
-usb_handle_setup_packet (void)
-{
-  _usb_got_SUDAV = 0;
-
-  // handle the standard requests...
-
-  switch (bRequestType & bmRT_TYPE_MASK){
-
-  case bmRT_TYPE_CLASS:
-  case bmRT_TYPE_RESERVED:
-    fx2_stall_ep0 ();		// we don't handle these.  indicate error
-    break;
-    
-  case bmRT_TYPE_VENDOR:
-    // call the application code.
-    // If it handles the command it returns non-zero
-
-    if (!app_vendor_cmd ())	
-      fx2_stall_ep0 ();
-    break;
-
-  case bmRT_TYPE_STD:
-    // these are the standard requests...
-
-    if ((bRequestType & bmRT_DIR_MASK) == bmRT_DIR_IN){
-
-      ////////////////////////////////////
-      //    handle the IN requests
-      ////////////////////////////////////
-
-      switch (bRequest){
-
-      case RQ_GET_CONFIG:
-	EP0BUF[0] = _usb_config;	// FIXME app should handle
-	EP0BCH = 0;
-	EP0BCL = 1;
-	break;
-	
-      // --------------------------------
-
-      case RQ_GET_INTERFACE:
-	EP0BUF[0] = _usb_alt_setting;	// FIXME app should handle
-	EP0BCH = 0;
-	EP0BCL = 1;
-	break;
-
-      // --------------------------------
-
-      case RQ_GET_DESCR:
-	switch (wValueH){
-
-	case DT_DEVICE:
-	  SUDPTRH = MSB (current_device_descr);
-	  SUDPTRL = LSB (current_device_descr);
-	  break;
-	  
-	case DT_DEVQUAL:
-	  SUDPTRH = MSB (current_devqual_descr);
-	  SUDPTRL = LSB (current_devqual_descr);
-	  break;
-
-	case DT_CONFIG:
-	  if (0 && wValueL != 1)	// FIXME only a single configuration
-	    fx2_stall_ep0 ();
-	  else {
-	    SUDPTRH = MSB (current_config_descr);
-	    SUDPTRL = LSB (current_config_descr);
-	  }
-	  break;
-
-	case DT_OTHER_SPEED:
-	  if (0 && wValueL != 1)	// FIXME only a single configuration
-	    fx2_stall_ep0 ();
-	  else {
-	    SUDPTRH = MSB (other_config_descr);
-	    SUDPTRL = LSB (other_config_descr);
-	  }
-	  break;
-
-	case DT_STRING:
-	  if (wValueL >= nstring_descriptors)
-	    fx2_stall_ep0 ();
-	  else {
-	    xdata char *p = string_descriptors[wValueL];
-	    SUDPTRH = MSB (p);
-	    SUDPTRL = LSB (p);
-	  }
-	  break;
-
-	default:
-	  fx2_stall_ep0 ();	// invalid request
-	  break;
-	}
-	break;
-	
-      // --------------------------------
-
-      case RQ_GET_STATUS:
-	switch (bRequestType & bmRT_RECIP_MASK){
-	case bmRT_RECIP_DEVICE:
-	  EP0BUF[0] = bmGSDA_SELF_POWERED;	// FIXME app should handle
-	  EP0BUF[1] = 0;
-	  EP0BCH = 0;
-	  EP0BCL = 2;
-	  break;
-
-	case bmRT_RECIP_INTERFACE:
-	  EP0BUF[0] = 0;
-	  EP0BUF[1] = 0;
-	  EP0BCH = 0;
-	  EP0BCL = 2;
-	  break;
-
-	case bmRT_RECIP_ENDPOINT:
-	  if (plausible_endpoint (wIndexL)){
-	    EP0BUF[0] = *epcs (wIndexL) & bmEPSTALL;
-	    EP0BUF[1] = 0;
-	    EP0BCH = 0;
-	    EP0BCL = 2;
-	  }
-	  else
-	    fx2_stall_ep0 ();
-	  break;
-
-	default:
-	  fx2_stall_ep0 ();
-	  break;
-	}
-	break;
-
-      // --------------------------------
-
-      case RQ_SYNCH_FRAME:	// not implemented
-      default:
-	fx2_stall_ep0 ();
-	break;
-      }
-    }
-
-    else {
-
-      ////////////////////////////////////
-      //    handle the OUT requests
-      ////////////////////////////////////
-
-      switch (bRequest){
-
-      case RQ_SET_CONFIG:
-	_usb_config = wValueL;		// FIXME app should handle
-	break;
-
-      case RQ_SET_INTERFACE:
-	_usb_alt_setting = wValueL;	// FIXME app should handle
-	break;
-
-      // --------------------------------
-
-      case RQ_CLEAR_FEATURE:
-	switch (bRequestType & bmRT_RECIP_MASK){
-
-	case bmRT_RECIP_DEVICE:
-	  switch (wValueL){
-	  case FS_DEV_REMOTE_WAKEUP:
-	  default:
-	    fx2_stall_ep0 ();
-	  }
-	  break;
-
-	case bmRT_RECIP_ENDPOINT:
-	  if (wValueL == FS_ENDPOINT_HALT && plausible_endpoint (wIndexL)){
-	    *epcs (wIndexL) &= ~bmEPSTALL;
-	    fx2_reset_data_toggle (wIndexL);
-	  }
-	  else
-	    fx2_stall_ep0 ();
-	  break;
-
-	default:
-	  fx2_stall_ep0 ();
-	  break;
-	}
-	break;
-
-      // --------------------------------
-
-      case RQ_SET_FEATURE:
-	switch (bRequestType & bmRT_RECIP_MASK){
-
-	case bmRT_RECIP_DEVICE:
-	  switch (wValueL){
-	  case FS_TEST_MODE:
-	    // hardware handles this after we complete SETUP phase handshake
-	    break;
-
-	  case FS_DEV_REMOTE_WAKEUP:
-	  default:
-	    fx2_stall_ep0 ();
-	    break;
-	  }
-	}
-	break;
-
-      case bmRT_RECIP_ENDPOINT:
-	switch (wValueL){
-	case FS_ENDPOINT_HALT:
-	  if (plausible_endpoint (wIndexL))
-	    *epcs (wIndexL) |= bmEPSTALL;
-	  else
-	    fx2_stall_ep0 ();
-	  break;
-
-	default:
-	  fx2_stall_ep0 ();
-	  break;
-	}
-	break;
-
-      // --------------------------------
-
-      case RQ_SET_ADDRESS:	// handled by fx2 hardware
-      case RQ_SET_DESCR:	// not implemented
-      default:
-	fx2_stall_ep0 ();
-      }
-
-    }
-    break;
-
-  }	// bmRT_TYPE_MASK
-
-  // ack handshake phase of device request
-  EP0CS |= bmHSNAK;
-}

firmware/fx2/common/usb_common.h

@@ -1,37 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef _USB_COMMON_H_
-#define _USB_COMMON_H_
-
-extern volatile bit _usb_got_SUDAV;
-
-// Provided by user application to handle VENDOR commands.
-// returns non-zero if it handled the command.
-unsigned char app_vendor_cmd (void);
-
-void usb_install_handlers (void);
-void usb_handle_setup_packet (void);
-
-#define usb_setup_packet_avail()	_usb_got_SUDAV
-
-#endif /* _USB_COMMON_H_ */

firmware/fx2/common/usb_descriptors.h

@@ -1,40 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-extern xdata const char high_speed_device_descr[];
-extern xdata const char high_speed_devqual_descr[];
-extern xdata const char high_speed_config_descr[];
-
-extern xdata const char full_speed_device_descr[];
-extern xdata const char full_speed_devqual_descr[];
-extern xdata const char full_speed_config_descr[];
-
-extern xdata unsigned char nstring_descriptors;
-extern xdata char * xdata string_descriptors[];
-
-/*
- * We patch these locations with info read from the usrp config eeprom
- */
-extern xdata char usb_desc_hw_rev_binary_patch_location_0[];
-extern xdata char usb_desc_hw_rev_binary_patch_location_1[];
-extern xdata char usb_desc_hw_rev_ascii_patch_location_0[];
-extern xdata char usb_desc_serial_number_ascii[];

firmware/fx2/common/usb_requests.h

@@ -1,88 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-// Standard USB requests.
-// These are contained in end point 0 setup packets
-
-
-#ifndef _USB_REQUESTS_H_
-#define _USB_REQUESTS_H_
-
-// format of bmRequestType byte
-
-#define	bmRT_DIR_MASK		(0x1 << 7)
-#define	bmRT_DIR_IN		(1 << 7)
-#define	bmRT_DIR_OUT		(0 << 7)
-
-#define	bmRT_TYPE_MASK		(0x3 << 5)
-#define	bmRT_TYPE_STD		(0 << 5)
-#define	bmRT_TYPE_CLASS		(1 << 5)
-#define	bmRT_TYPE_VENDOR	(2 << 5)
-#define	bmRT_TYPE_RESERVED	(3 << 5)
-
-#define	bmRT_RECIP_MASK		(0x1f << 0)
-#define	bmRT_RECIP_DEVICE	(0 << 0)
-#define	bmRT_RECIP_INTERFACE	(1 << 0)
-#define	bmRT_RECIP_ENDPOINT	(2 << 0)
-#define	bmRT_RECIP_OTHER	(3 << 0)
-
-
-// standard request codes (bRequest)
-
-#define	RQ_GET_STATUS		0
-#define	RQ_CLEAR_FEATURE	1
-#define	RQ_RESERVED_2		2
-#define	RQ_SET_FEATURE		3
-#define	RQ_RESERVED_4		4
-#define	RQ_SET_ADDRESS		5
-#define	RQ_GET_DESCR		6
-#define	RQ_SET_DESCR		7
-#define	RQ_GET_CONFIG		8
-#define	RQ_SET_CONFIG		9
-#define	RQ_GET_INTERFACE       10
-#define	RQ_SET_INTERFACE       11
-#define	RQ_SYNCH_FRAME	       12
-
-// standard descriptor types
-
-#define	DT_DEVICE		1
-#define	DT_CONFIG		2
-#define	DT_STRING		3
-#define	DT_INTERFACE		4
-#define	DT_ENDPOINT		5
-#define	DT_DEVQUAL		6
-#define	DT_OTHER_SPEED		7
-#define	DT_INTERFACE_POWER	8
-
-// standard feature selectors
-
-#define	FS_ENDPOINT_HALT	0	// recip: endpoint
-#define	FS_DEV_REMOTE_WAKEUP	1	// recip: device
-#define	FS_TEST_MODE		2	// recip: device
-
-// Get Status device attributes
-
-#define	bmGSDA_SELF_POWERED	0x01
-#define	bmGSDA_REM_WAKEUP	0x02
-
-
-#endif /* _USB_REQUESTS_H_ */

firmware/fx2/common/usrp_commands.h

@@ -1,105 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003,2004 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#ifndef _USRP_COMMANDS_H_
-#define _USRP_COMMANDS_H_
-
-#include <usrp_interfaces.h>
-#include <usrp_spi_defs.h>
-
-#define	MAX_EP0_PKTSIZE		       64	// max size of EP0 packet on FX2
-
-// ----------------------------------------------------------------
-//			Vendor bmRequestType's
-// ----------------------------------------------------------------
-
-#define	VRT_VENDOR_IN			0xC0
-#define	VRT_VENDOR_OUT			0x40
-
-// ----------------------------------------------------------------
-//			  USRP Vendor Requests
-//
-// Note that Cypress reserves [0xA0,0xAF].
-// 0xA0 is the firmware load function.
-// ----------------------------------------------------------------
-
-
-// IN commands
-
-#define	VRQ_GET_STATUS			0x80
-#define		GS_TX_UNDERRUN			0	// wIndexL	// returns 1 byte
-#define		GS_RX_OVERRUN			1	// wIndexL	// returns 1 byte
-
-#define	VRQ_I2C_READ			0x81		// wValueL: i2c address; length: how much to read
-
-#define	VRQ_SPI_READ			0x82		// wValue: optional header bytes
-							// wIndexH:	enables
-							// wIndexL:	format
-							// len: how much to read
-
-#define VRQ_FW_COMPAT 0x83 //low 16 bits
-
-// OUT commands
-
-#define	VRQ_SET_LED			0x01		// wValueL off/on {0,1}; wIndexL: which {0,1}
-
-#define	VRQ_FPGA_LOAD			0x02
-#  define	FL_BEGIN			0	// wIndexL: begin fpga programming cycle.  stalls if trouble.
-#  define	FL_XFER				1	// wIndexL: xfer up to 64 bytes of data
-#  define	FL_END				2	// wIndexL: end programming cycle, check for success.
-							//          stalls endpoint if trouble.
-
-#define	VRQ_FPGA_WRITE_REG		0x03		// wIndexL: regno; data: 32-bit regval MSB first
-#define	VRQ_FPGA_SET_RESET		0x04		// wValueL: {0,1}
-#define	VRQ_FPGA_SET_TX_ENABLE		0x05		// wValueL: {0,1}
-#define	VRQ_FPGA_SET_RX_ENABLE		0x06		// wValueL: {0,1}
-// see below VRQ_FPGA_SET_{TX,RX}_RESET
-
-#define	VRQ_SET_SLEEP_BITS		0x07		// wValueH: mask; wValueL: bits.  set bits given by mask to bits
-
-#  define	SLEEP_ADC0			0x01
-#  define	SLEEP_ADC1			0x02
-#  define	SLEEP_DAC0			0x04
-#  define	SLEEP_DAC1			0x08
-
-#define	VRQ_I2C_WRITE			0x08		// wValueL: i2c address; data: data
-
-#define	VRQ_SPI_WRITE			0x09		// wValue: optional header bytes
-							// wIndexH:	enables
-							// wIndexL:	format
-							// len: how much to write
-
-#define	VRQ_FPGA_SET_TX_RESET		0x0a		// wValueL: {0, 1}
-#define	VRQ_FPGA_SET_RX_RESET		0x0b		// wValueL: {0, 1}
-
-#define VRQ_RESET_GPIF			0x0c
-#define VRQ_ENABLE_GPIF			0x0d
-#define VRQ_CLEAR_FPGA_FIFO     0x0e
-
-
-// -------------------------------------------------------------------
-// we store the hashes at fixed addresses in the FX2 internal memory
-
-#define	  USRP_HASH_SLOT_0_ADDR			0xe1e0
-#define	  USRP_HASH_SLOT_1_ADDR			0xe1f0
-
-
-
-#endif /* _USRP_COMMANDS_H_ */

firmware/fx2/common/usrp_common.h

@@ -1,77 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003,2006 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-/*
- * common defines and prototypes for USRP
- *
- * In comments below "TRM" refers to the EZ-USB FX2 Technical Reference Manual
- */
-
-#ifndef _USRPCOMMON_H_
-#define _USRPCOMMON_H_
-
-#include "usrp_config.h"
-#include "usrp_regs.h"
-#include "syncdelay.h"
-
-/*
- * From TRM page 15-105:
- *
- * Under certain conditions, some read and write access to the FX2
- * registers must be separated by a "synchronization delay".  The
- * delay is necessary only under the following conditions:
- *
- *   - between a write to any register in the 0xE600 - 0xE6FF range 
- *     and a write to one of the registers listed below.
- *
- *   - between a write to one of the registers listed below and a read 
- *     from any register in the 0xE600 - 0xE6FF range.
- *
- *   Registers which require a synchronization delay:
- *
- *	FIFORESET			FIFOPINPOLAR
- *	INPKTEND			EPxBCH:L
- *	EPxFIFOPFH:L			EPxAUTOINLENH:L
- *	EPxFIFOCFG			EPxGPIFFLGSEL
- *	PINFLAGSAB			PINFLAGSCD
- *	EPxFIFOIE			EPxFIFOIRQ
- *	GPIFIE				GPIFIRQ
- *	UDMACRCH:L			GPIFADRH:L
- *	GPIFTRIG			EPxGPIFTRIG
- *	OUTPKTEND			REVCTL
- *	GPIFTCB3			GPIFTCB2
- *	GPIFTCB1			GPIFTCB0
- */
-
-#define	TRUE		1
-#define	FALSE		0
-
-
-void init_usrp (void);
-void init_gpif (void);
-
-void set_led_0 (unsigned char on);
-void set_led_1 (unsigned char on);
-void toggle_led_0 (void);
-void toggle_led_1 (void);
-
-#define la_trace(v)
-
-#endif /* _USRPCOMMON_H_ */

firmware/fx2/common/usrp_config.h

@@ -1,44 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-/*
- * configuration stuff for debugging
- */
-
-/*
- * Define to 0 for normal use of port A, i.e., FPGA control bus.
- * Define to 1 to write trace to port A for scoping with logic analyzer.
- */
-#define	UC_TRACE_USING_PORT_A			0
-
-
-/*
- * Define to 0 for normal use of low 3 bits of port E, i.e., A/D, D/A SLEEP bits.
- * Define to 1 to enable by default driving the GPIF state to the
- * low three bits of port E.
- */
-#define UC_START_WITH_GSTATE_OUTPUT_ENABLED	0
-
-
-/*
- * Define to 1 for normal use (the board really has an FPGA on it).
- * Define to 0 for debug use on board without FPGA.
- */
-#define UC_BOARD_HAS_FPGA			1

firmware/fx2/common/usrp_globals.h

@@ -1,32 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-#ifndef _USRP_GLOBALS_H_
-#define _USRP_GLOBALS_H_
-
-extern unsigned char g_tx_enable;
-extern unsigned char g_rx_enable;
-extern unsigned char g_fpga_reset;
-extern unsigned char g_rx_overrun;
-extern unsigned char g_tx_underrun;
-
-
-#endif /* _USRP_GLOBALS_H_ */

firmware/fx2/common/usrp_i2c_addr.h

@@ -1,78 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-#ifndef INCLUDED_USRP_I2C_ADDR_H
-#define INCLUDED_USRP_I2C_ADDR_H
-
-// I2C addresses
-
-#define I2C_DEV_EEPROM	0x50		// 24LC02[45]:  7-bits 1010xxx
-
-#define	I2C_ADDR_BOOT	(I2C_DEV_EEPROM	| 0x0)
-#define	I2C_ADDR_TX_A	(I2C_DEV_EEPROM | 0x4)
-#define	I2C_ADDR_RX_A	(I2C_DEV_EEPROM | 0x5)
-#define	I2C_ADDR_TX_B	(I2C_DEV_EEPROM	| 0x6)
-#define	I2C_ADDR_RX_B	(I2C_DEV_EEPROM | 0x7)
-
-
-// format of FX2 BOOT EEPROM
-//	00: 0xC0	code for ``Read IDs from EEPROM''
-//	01: 0xFE	USB Vendor ID (LSB)
-//	02: 0xFF	USB Vendor ID (MSB)
-//	03: 0x02	USB Product ID (LSB)
-//	04: 0x00	USB Product ID (MSB)
-//	05: 0x01	USB Device ID (LSB)	// rev1
-//	06: 0x00	USB Device ID (MSB)	// 0 = unconfig'd (no firmware)
-//	07: 0x00	option byte
-
-
-// format of daughterboard EEPROM
-//	00: 0xDB	code for ``I'm a daughterboard''
-//	01:   ..	Daughterboard ID (LSB)
-//	02:   ..	Daughterboard ID (MSB)
-//	03:   ..	io bits  7-0 direction (bit set if it's an output from m'board)
-//	04:   ..	io bits 15-8 direction (bit set if it's an output from m'board)
-//	05:   ..	ADC0 DC offset correction (LSB)
-//	06:   ..	ADC0 DC offset correction (MSB)
-//	07:   ..	ADC1 DC offset correction (LSB)
-//	08:   ..	ADC1 DC offset correction (MSB)
-// 	...
-//	1f:   ..	negative of the sum of bytes [0x00, 0x1e]
-
-#define	DB_EEPROM_MAGIC		0x00
-#define	  DB_EEPROM_MAGIC_VALUE			0xDB
-#define	DB_EEPROM_ID_LSB		0x01
-#define	DB_EEPROM_ID_MSB		0x02
-#define	DB_EEPROM_OE_LSB		0x03
-#define	DB_EEPROM_OE_MSB		0x04
-#define	DB_EEPROM_OFFSET_0_LSB		0x05	// offset correction for ADC or DAC 0
-#define	DB_EEPROM_OFFSET_0_MSB		0x06
-#define	DB_EEPROM_OFFSET_1_LSB		0x07	// offset correction for ADC or DAC 1
-#define	DB_EEPROM_OFFSET_1_MSB		0x08
-#define	DB_EEPROM_CHKSUM		0x1f
-
-#define	DB_EEPROM_CLEN			0x20	// length of common portion of eeprom
-
-#define	DB_EEPROM_CUSTOM_BASE		DB_EEPROM_CLEN	// first avail offset for
-							//   daughterboard specific use
-
-#endif /* INCLUDED_USRP_I2C_ADDR_H */
-

firmware/fx2/common/usrp_ids.h

@@ -1,68 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003,2006,2007 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-/*
- * USB Vendor and Product IDs that we use
- *
- * (keep in sync with usb_descriptors.a51)
- */
-
-#ifndef _USRP_IDS_H_
-#define _USRP_IDS_H_
-
-#define	USB_VID_CYPRESS			0x04b4
-#define	USB_PID_CYPRESS_FX2		0x8613
-
-
-#define	USB_VID_FSF			0xfffe	  // Free Software Folks
-#define	USB_PID_FSF_EXP_0		0x0000	  // Experimental 0
-#define	USB_PID_FSF_EXP_1		0x0001	  // Experimental 1
-#define	USB_PID_FSF_USRP		0x0002	  // Universal Software Radio Peripheral
-#define	USB_PID_FSF_USRP1P	0x0003	  // USRP1P
-#define	USB_PID_FSF_SSRP		0x0004	  // Simple Software Radio Peripheral
-#define	USB_PID_FSF_SSRP_reserved	0x0005	  // Simple Software Radio Peripheral
-#define USB_PID_FSF_HPSDR               0x0006    // High Performance Software Defined Radio (Internal Boot)
-#define USB_PID_FSF_HPSDR_HA    	0x0007    // High Performance Software Defined Radio (Host Assisted Boot)
-#define USB_PID_FSF_QS1R	    	0x0008    // QS1R HF receiver
-#define USB_PID_FSF_EZDOP	    	0x0009    // ezdop <jcorgan@aeinet.com>
-#define USB_PID_FSF_BDALE_0		0x000a	  // Bdale Garbee <bdale@gag.com>
-#define USB_PID_FSF_BDALE_1		0x000b	  // Bdale Garbee <bdale@gag.com>
-#define USB_PID_FSF_BDALE_2		0x000c	  // Bdale Garbee <bdale@gag.com>
-#define USB_PID_FSF_BDALE_3		0x000d	  // Bdale Garbee <bdale@gag.com>
-#define USB_PID_FSF_BDALE_4		0x000e	  // Bdale Garbee <bdale@gag.com>
-#define USB_PID_FSF_BDALE_5		0x000f	  // Bdale Garbee <bdale@gag.com>
-#define USB_PID_FSF_BDALE_6		0x0010	  // Bdale Garbee <bdale@gag.com>
-#define USB_PID_FSF_BDALE_7		0x0011	  // Bdale Garbee <bdale@gag.com>
-#define USB_PID_FSF_BDALE_8		0x0012	  // Bdale Garbee <bdale@gag.com>
-#define USB_PID_FSF_BDALE_9		0x0013	  // Bdale Garbee <bdale@gag.com>
-#define USB_PID_FSF_HPSDR_HERMES	0x0014	  // HPSDR Hermes
-#define USB_PID_FSF_THINKRF		0x0015	  // Catalin Patulea <catalin.patulea@thinkrf.com>
-#define USB_PID_FSF_MSA			0x0016	  // Hans de Bok <hdbok@dionaea.demon.nl> Scotty's Modular Spectrum Analyzer
-
-#define USB_PID_FSF_LBNL_UXO            0x0018    // http://recycle.lbl.gov/~ldoolitt/uxo/
-
-
-#define	USB_DID_USRP_0			0x0000	  // unconfigured rev 0 USRP
-#define	USB_DID_USRP_1			0x0001	  // unconfigured rev 1 USRP
-#define	USB_DID_USRP_2			0x0002	  // unconfigured rev 2 USRP
-
-#endif /* _USRP_IDS_H_ */

firmware/fx2/common/usrp_interfaces.h

@@ -1,47 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef _USRP_INTERFACES_H_
-#define _USRP_INTERFACES_H_
-
-/*
- * We've now split the USRP into 3 separate interfaces.
- *
- * Interface 0 contains only ep0 and is used for command and status.
- * Interface 1 is the Tx path and it uses ep2 OUT BULK.
- * Interface 2 is the Rx path and it uses ep6 IN BULK.
- */
- 
-#define	USRP_CMD_INTERFACE		0
-#define	USRP_CMD_ALTINTERFACE		0
-#define	USRP_CMD_ENDPOINT		0
-
-#define	USRP_TX_INTERFACE		1
-#define	USRP_TX_ALTINTERFACE		0
-#define	USRP_TX_ENDPOINT		2	// streaming data from host to FPGA
-
-#define	USRP_RX_INTERFACE		2
-#define	USRP_RX_ALTINTERFACE		0
-#define	USRP_RX_ENDPOINT		6	// streaming data from FPGA to host
-
-
-#endif /* _USRP_INTERFACES_H_ */

firmware/fx2/common/usrp_spi_defs.h

@@ -1,86 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef INCLUDED_USRP_SPI_DEFS_H
-#define INCLUDED_USRP_SPI_DEFS_H
-
-/*
- * defines for the VRQ_SPI_READ and VRQ_SPI_WRITE commands
- *
- * SPI == "Serial Port Interface".  SPI is a 3 wire bus plus a
- * separate enable for each peripheral.  The common lines are SCLK,
- * SDI and SDO.  The FX2 always drives SCLK and SDI, the clock and
- * data lines from the FX2 to the peripheral.  When enabled, a
- * peripheral may drive SDO, the data line from the peripheral to the
- * FX2.
- *
- * The SPI_READ and SPI_WRITE commands are formatted identically.
- * Each specifies which peripherals to enable, whether the bits should
- * be transmistted Most Significant Bit first or Least Significant Bit
- * first, the number of bytes in the optional header, and the number
- * of bytes to read or write in the body.
- *
- * The body is limited to 64 bytes.  The optional header may contain
- * 0, 1 or 2 bytes.  For an SPI_WRITE, the header bytes are
- * transmitted to the peripheral followed by the the body bytes.  For
- * an SPI_READ, the header bytes are transmitted to the peripheral,
- * then len bytes are read back from the peripheral.
- */
-
-/*
- * SPI_FMT_* goes in wIndexL
- */
-#define SPI_FMT_xSB_MASK	(1 << 7)
-#  define	SPI_FMT_LSB	(1 << 7)	// least signficant bit first
-#  define	SPI_FMT_MSB	(0 << 7)	// most significant bit first
-#define	SPI_FMT_HDR_MASK	(3 << 5)
-#  define	SPI_FMT_HDR_0	(0 << 5)	// 0 header bytes
-#  define	SPI_FMT_HDR_1	(1 << 5)	// 1 header byte
-#  define	SPI_FMT_HDR_2	(2 << 5)	// 2 header bytes
-
-/*
- * SPI_ENABLE_*  goes in wIndexH
- *
- * For the software interface, the enables are active high.
- * For reads, it's an error to have more than one enable set.
- *
- * [FWIW, the hardware implements them as active low.  Don't change the
- * definitions of these.  They are related to usrp_rev1_regs.h]
- */
-#define	SPI_ENABLE_FPGA		0x01	// select FPGA
-#define	SPI_ENABLE_CODEC_A	0x02	// select AD9862 A
-#define	SPI_ENABLE_CODEC_B	0x04	// select AD9862 B
-#define	SPI_ENABLE_reserved	0x08
-#define	SPI_ENABLE_TX_A		0x10	// select d'board TX A
-#define	SPI_ENABLE_RX_A		0x20	// select d'board RX A
-#define	SPI_ENABLE_TX_B		0x40	// select d'board TX B
-#define	SPI_ENABLE_RX_B		0x80	// select d'board RX B
-
-/*
- * If there's one header byte, it goes in wValueL.
- *
- * If there are two header bytes, they go in wValueH | wValueL.
- * The transmit order of the bytes (and bits within them) is 
- * determined by SPI_FMT_*SB
- */
- 
-#endif /* INCLUDED_USRP_SPI_DEFS_H */

firmware/fx2/common/vectors.a51

@@ -1,179 +0,0 @@
-;;; -*- asm -*-
-;;;
-;;; Copyright 2003 Free Software Foundation, Inc.
-;;; 
-;;; This file is part of GNU Radio
-;;; 
-;;; GNU Radio is free software; you can redistribute it and/or modify
-;;; it under the terms of the GNU General Public License as published by
-;;; the Free Software Foundation; either version 3, or (at your option)
-;;; any later version.
-;;; 
-;;; GNU Radio is distributed in the hope that it will be useful,
-;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;;; GNU General Public License for more details.
-;;; 
-;;; You should have received a copy of the GNU General Public License
-;;; along with GNU Radio; see the file COPYING.  If not, write to
-;;; the Free Software Foundation, Inc., 51 Franklin Street,
-;;; Boston, MA 02110-1301, USA.
-;;; 
-
-;;; Interrupt vectors.
-
-;;; N.B. This object module must come first in the list of modules
-
-	.module vectors
-
-;;; ----------------------------------------------------------------
-;;;		  standard FX2 interrupt vectors
-;;; ----------------------------------------------------------------
-	.area CSEG (CODE)
-	.area GSINIT (CODE)
-	.area CSEG (CODE)
-__standard_interrupt_vector::
-__reset_vector::
-	ljmp	s_GSINIT
-	
-	;; 13 8-byte entries.  We point them all at __isr_nop
-	ljmp	__isr_nop	; 3 bytes
-	.ds	5		; + 5 = 8 bytes for vector slot
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-
-__isr_nop::
-	reti
-
-;;; ----------------------------------------------------------------
-;;; the FIFO/GPIF autovector.  14 4-byte entries.
-;;; must start on a 128 byte boundary.
-;;; ----------------------------------------------------------------
-	
-	. = __reset_vector + 0x0080
-		
-__fifo_gpif_autovector::
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-
-	
-;;; ----------------------------------------------------------------
-;;; the USB autovector.  32 4-byte entries.
-;;; must start on a 256 byte boundary.
-;;; ----------------------------------------------------------------
-
-	. = __reset_vector + 0x0100
-	
-__usb_autovector::
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop

firmware/fx2/config/CMakeASM_SDCCInformation.cmake

@@ -1,28 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-# support for the SDCC assembler, asx8051
-SET( ASM_DIALECT "_SDCC" )
-SET( CMAKE_ASM${ASM_DIALECT}_SOURCE_FILE_EXTENSIONS a51 )
-
-#i don't want to talk about it. i had such high hopes for CMake.
-SET( CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <FLAGS> -plosgff <SOURCE>" "${CMAKE_COMMAND} -DFILE=<OBJECT> -DSOURCE=<SOURCE> -P ${CMAKE_SOURCE_DIR}/config/Rename.cmake")
-
-INCLUDE( CMakeASMInformation )
-SET( CMAKE_ASM${ASM_DIALECT}_OUTPUT_EXTENSION ".rel" ) #must go here because the include appears to overwrite it, although it shouldn't
-# for future use
-SET( ASM_DIALECT )

firmware/fx2/config/CMakeDetermineASM_SDCCCompiler.cmake

@@ -1,22 +0,0 @@
-
-#=============================================================================
-# Copyright 2008-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distributed this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Find the MS assembler (masm or masm64)
-
-SET(ASM_DIALECT "_SDCC")
-
-SET(CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT asx8051)
-
-INCLUDE(CMakeDetermineASMCompiler)
-SET(ASM_DIALECT)

firmware/fx2/config/CMakeTestASM_SDCCCompiler.cmake

@@ -1,23 +0,0 @@
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distributed this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This file is used by EnableLanguage in cmGlobalGenerator to
-# determine that that selected ASM-ATT compiler can actually compile
-# and link the most basic of programs.   If not, a fatal error
-# is set and cmake stops processing commands and will not generate
-# any makefiles or projects.
-
-SET(ASM_DIALECT "_SDCC")
-INCLUDE(CMakeTestASMCompiler)
-SET(ASM_DIALECT)

firmware/fx2/config/Rename.cmake

@@ -1,37 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-#go and fetch the real compiler outputs because the compiler does things wrong and CMake is too damn brittle to cope
-#just incidentally, why the heck does aslink look for a .lst input? why should it care?
-
-#first the .rel
-get_filename_component(source_noext ${SOURCE} NAME_WE)
-get_filename_component(source_path ${SOURCE} PATH)
-set(compiled_ext .rel)
-list(APPEND compiled_filepath ${source_path}/${source_noext}${compiled_ext})
-#EXECUTE_PROCESS(COMMAND echo Moving ${compiled_filepath} to ${FILE})
-EXECUTE_PROCESS(COMMAND ${CMAKE_COMMAND} -E rename ${compiled_filepath} ${FILE})
-
-#now do the same for the .lst
-set(compiled_lst .lst)
-get_filename_component(src_ext ${SOURCE} EXT)
-get_filename_component(lst_noext ${FILE} NAME_WE)
-get_filename_component(lst_path ${FILE} PATH)
-list(APPEND compiled_lstpath ${source_path}/${source_noext}${compiled_lst})
-list(APPEND compiled_outputlstpath ${lst_path}/${lst_noext}${src_ext}${compiled_lst})
-#EXECUTE_PROCESS(COMMAND echo Moving ${compiled_lstpath} to ${compiled_outputlstpath})
-EXECUTE_PROCESS(COMMAND ${CMAKE_COMMAND} -E rename ${compiled_lstpath} ${compiled_outputlstpath})

firmware/fx2/config/Toolchain-sdcc.cmake

@@ -1,32 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-# the name of the target operating system
-SET(CMAKE_SYSTEM_NAME Generic)
-# which compilers to use for C and C++
-SET(CMAKE_C_COMPILER sdcc)
-
-# here is where the target environment is located
-SET(CMAKE_FIND_ROOT_PATH  /usr/bin /usr/share/sdcc)
-
-# adjust the default behaviour of the FIND_XXX() commands:
-# search headers and libraries in the target environment, search 
-# programs in the host environment
-set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
-set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
-set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
-

firmware/fx2/usrp1/CMakeLists.txt

@@ -1,84 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-include_directories(${CMAKE_SOURCE_DIR}/common)
-
-#for usrp_common.h and the regs files...
-set(CMAKE_INCLUDE_CURRENT_DIR ON)
-
-#now make a lib to link against
-set(libusrp1_sources 
-    ${CMAKE_SOURCE_DIR}/common/delay.c
-    ${CMAKE_SOURCE_DIR}/common/fx2utils.c
-    ${CMAKE_SOURCE_DIR}/common/i2c.c
-    ${CMAKE_SOURCE_DIR}/common/init_gpif.c
-    ${CMAKE_SOURCE_DIR}/common/isr.c
-    ${CMAKE_SOURCE_DIR}/common/timer.c
-    ${CMAKE_SOURCE_DIR}/common/usb_common.c
-#    ${CMAKE_SOURCE_DIR}/common/spi.c
-#    ${CMAKE_SOURCE_DIR}/common/vectors.a51
-)
-
-#file(GLOB libusrp1_c_sources ${CMAKE_SOURCE_DIR}/common/*.c)
-#file(GLOB libusrp1_a51_sources ${CMAKE_SOURCE_DIR}/common/*.a51)
-#list(APPEND libusrp1_sources ${libusrp1_c_sources} ${libusrp1_a51_sources})
-
-add_library(libusrp1 STATIC ${libusrp1_sources})
-
-# edit-gpif hacks up gpif.c for our purposes. no major surgery, just moving stuff around.
-set(GPIF_SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/gpif.c)
-set(GPIF_SOURCE_OUTPUT ${CMAKE_CURRENT_SOURCE_DIR}/usrp_gpif.c)
-set(GPIF_HEADER_OUTPUT ${CMAKE_CURRENT_SOURCE_DIR}/usrp_gpif_inline.h)
-
-add_custom_command(
-        OUTPUT ${GPIF_SOURCE_OUTPUT}
-        DEPENDS ${EDIT_GPIF_USRP1}
-        COMMAND ${PYTHON_EXECUTABLE} ${EDIT_GPIF_USRP1} ${GPIF_SOURCE} ${GPIF_SOURCE_OUTPUT} ${GPIF_HEADER_OUTPUT}
-        COMMENT "Generating ${GPIF_SOURCE_OUTPUT}"
-)
-
-#file(GLOB usrp1_sources *.c)
-set(usrp1_sources 
-    ${CMAKE_SOURCE_DIR}/common/vectors.a51
-    board_specific.c 
-    eeprom_io.c 
-    fpga_load.c 
-    fpga_rev2.c 
-    usrp_common.c 
-    usrp_gpif.c 
-    usrp_main.c 
-    usb_descriptors.a51 
-    ${CMAKE_SOURCE_DIR}/common/spi.c
-    ${CMAKE_SOURCE_DIR}/common/_startup.a51
-)
-add_executable(usrp1_fw ${usrp1_sources})
-target_link_libraries(usrp1_fw libusrp1)
-
-set(eeprom1_sources
-    ${CMAKE_SOURCE_DIR}/common/eeprom_boot.a51
-    ${CMAKE_SOURCE_DIR}/common/eeprom_init.c
-    ${CMAKE_SOURCE_DIR}/common/_startup.a51
-)
-
-add_custom_target(usrp1_eeprom ALL
-    DEPENDS usrp1_boot
-    COMMAND objcopy -I ihex -O binary usrp1_boot.ihx usrp1_boot.bin
-    COMMAND ${PYTHON_EXECUTABLE} ${BUILD_EEPROM} -r1 usrp1_boot.bin usrp1_eeprom.bin
-)
-
-add_executable(usrp1_boot ${eeprom1_sources})
-target_link_libraries(usrp1_boot libusrp1)

firmware/fx2/usrp1/board_specific.c

@@ -1,113 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "usrp_common.h"
-#include "spi.h"
-
-void
-set_led_0 (unsigned char on)
-{
-  if (!on)			// active low
-    USRP_PC |= bmPC_LED0;
-  else
-    USRP_PC &= ~bmPC_LED0;
-}
-
-void 
-set_led_1 (unsigned char on)
-{
-  if (!on)			// active low
-    USRP_PC |= bmPC_LED1;
-  else
-    USRP_PC &= ~bmPC_LED1;
-}
-
-void
-toggle_led_0 (void)
-{
-  USRP_PC ^= bmPC_LED0;
-}
-
-void
-toggle_led_1 (void)
-{
-  USRP_PC ^= bmPC_LED1;
-}
-
-void
-la_trace_init (void)
-{
-}
-
-void
-set_sleep_bits (unsigned char bits, unsigned char mask)
-{
-  // NOP on usrp1
-}
-
-static xdata unsigned char xbuf[1];
-
-void
-write_9862 (unsigned char which, unsigned char regno, unsigned char value)
-{
-  xbuf[0] = value;
-  
-  spi_write (0, regno & 0x3f,
-	     which == 0 ? SPI_ENABLE_CODEC_A : SPI_ENABLE_CODEC_B,
-	     SPI_FMT_MSB | SPI_FMT_HDR_1,
-	     xbuf, 1);
-}
-
-void
-write_both_9862s (unsigned char regno, unsigned char value)
-{
-  xbuf[0] = value;
-  
-  spi_write (0, regno & 0x3f,
-	     SPI_ENABLE_CODEC_A | SPI_ENABLE_CODEC_B,
-	     SPI_FMT_MSB | SPI_FMT_HDR_1,
-	     xbuf, 1);
-}
-
-#define REG_RX_PWR_DN		 1
-#define	REG_TX_PWR_DN		 8
-#define	REG_TX_MODULATOR	20
-
-static void
-power_down_9862s (void)
-{
-  write_both_9862s (REG_RX_PWR_DN,    0x01);
-  write_both_9862s (REG_TX_PWR_DN,    0x0f);	// pwr dn digital and analog_both
-  write_both_9862s (REG_TX_MODULATOR, 0x00);	// coarse & fine modulators disabled
-}
-
-void
-init_board (void)
-{
-  la_trace_init ();
-  init_spi ();
-
-  USRP_PC &= ~bmPC_nRESET;	// active low reset
-  USRP_PC |= bmPC_nRESET;
-
-  power_down_9862s ();
-}

firmware/fx2/usrp1/eeprom_io.c

@@ -1,65 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2006 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "eeprom_io.h"
-#include "i2c.h"
-#include "delay.h"
-
-// returns non-zero if successful, else 0
-unsigned char
-eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
-	     xdata unsigned char *buf, unsigned char len)
-{
-  // We setup a random read by first doing a "zero byte write".
-  // Writes carry an address.  Reads use an implicit address.
-
-  static xdata unsigned char cmd[1];
-  cmd[0] = eeprom_offset;
-  if (!i2c_write(i2c_addr, cmd, 1))
-    return 0;
-
-  return i2c_read(i2c_addr, buf, len);
-}
-
-
-#if 0
-
-// returns non-zero if successful, else 0
-unsigned char
-eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
-	      const xdata unsigned char *buf, unsigned char len)
-{
-  static xdata unsigned char cmd[2];
-  unsigned char ok;
-
-  while (len-- > 0){
-    cmd[0] = eeprom_offset++;
-    cmd[1] = *buf++;
-    ok = i2c_write(i2c_addr, cmd, 2);
-    mdelay(10);		// delay 10ms worst case write time
-    if (!ok)
-      return 0;
-  }
-  return 1;
-}
-
-#endif

firmware/fx2/usrp1/eeprom_io.h

@@ -1,38 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2006 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef INCLUDED_EEPROM_IO_H
-#define INCLUDED_EEPROM_IO_H
-
-
-// returns non-zero if successful, else 0
-unsigned char
-eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
-	     xdata unsigned char *buf, unsigned char len);
-
-// returns non-zero if successful, else 0
-unsigned char
-eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
-	      const xdata unsigned char *buf, unsigned char len);
-
-
-#endif /* INCLUDED_EEPROM_IO_H */

firmware/fx2/usrp1/fpga_load.c

@@ -1,193 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-#include "fpga_load.h"
-#include "delay.h"
-
-/*
- * setup altera FPGA serial load (PS).
- *
- * On entry:
- *	don't care
- *
- * On exit:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- */
-unsigned char
-fpga_load_begin (void)
-{
-  USRP_ALTERA_CONFIG &= ~bmALTERA_BITS;		// clear all bits (NCONFIG low)
-  udelay (40);					// wait 40 us
-  USRP_ALTERA_CONFIG |= bmALTERA_NCONFIG;	// set NCONFIG high
-
-  if (UC_BOARD_HAS_FPGA){
-    // FIXME should really cap this loop with a counter so we
-    //   don't hang forever on a hardware failure.
-    while ((USRP_ALTERA_CONFIG & bmALTERA_NSTATUS) == 0) // wait for NSTATUS to go high
-      ;
-  }
-
-  // ready to xfer now
-
-  return 1;
-}
-
-/*
- * clock out the low bit of bits.
- *
- * On entry:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- *
- * On exit:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- */
-
-
-#if 0
-
-static void
-clock_out_config_byte (unsigned char bits)
-{
-  unsigned char i;
-
-  // clock out configuration byte, least significant bit first
-
-  for (i = 0; i < 8; i++){
-
-    USRP_ALTERA_CONFIG = ((USRP_ALTERA_CONFIG & ~bmALTERA_DATA0) | ((bits & 1) ? bmALTERA_DATA0 : 0));
-    USRP_ALTERA_CONFIG |= bmALTERA_DCLK;		/* set DCLK to 1 */
-    USRP_ALTERA_CONFIG &= ~bmALTERA_DCLK;		/* set DCLK to 0 */
-
-    bits = bits >> 1;
-  }
-}
-	
-#else
-
-static void 
-clock_out_config_byte (unsigned char bits) _naked
-{
-    _asm
-	mov	a, dpl
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	ret	
-
-    _endasm;
-}
-
-#endif
-
-static void
-clock_out_bytes (unsigned char bytecount,
-		 unsigned char xdata *p)
-{
-  while (bytecount-- > 0)
-    clock_out_config_byte (*p++);
-}
-
-/*
- * Transfer block of bytes from packet to FPGA serial configuration port
- *
- * On entry:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- *
- * On exit:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- */
-unsigned char
-fpga_load_xfer (xdata unsigned char *p, unsigned char bytecount)
-{
-  clock_out_bytes (bytecount, p);
-  return 1;
-}
-
-/*
- * check for successful load...
- */
-unsigned char
-fpga_load_end (void)
-{
-  unsigned char status = USRP_ALTERA_CONFIG;
-
-  if (!UC_BOARD_HAS_FPGA)			// always true if we don't have FPGA
-    return 1;
-
-  if ((status & bmALTERA_NSTATUS) == 0)		// failed to program
-    return 0;
-
-  if ((status & bmALTERA_CONF_DONE) == bmALTERA_CONF_DONE)
-    return 1;					// everything's cool
-
-  // I don't think this should happen.  It indicates that
-  // programming is still in progress.
-
-  return 0;
-}

firmware/fx2/usrp1/fpga_rev2.c

@@ -1,122 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "fpga.h"
-#include "fpga_regs_common.h"
-#include "usrp_common.h"
-#include "usrp_globals.h"
-#include "spi.h"
-
-unsigned char g_tx_reset = 0;
-unsigned char g_rx_reset = 0;
-
-void
-fpga_write_reg (unsigned char regno, const xdata unsigned char *regval)
-{
-  spi_write (0, 0x00 | (regno & 0x7f),
-	     SPI_ENABLE_FPGA,
-	     SPI_FMT_MSB | SPI_FMT_HDR_1,
-	     regval, 4);
-}
-
-
-static xdata unsigned char regval[4] = {0, 0, 0, 0};
-
-static void
-write_fpga_master_ctrl (void)
-{
-  unsigned char v = 0;
-  if (g_tx_enable)
-    v |= bmFR_MC_ENABLE_TX;
-  if (g_rx_enable)
-    v |= bmFR_MC_ENABLE_RX;
-  if (g_tx_reset)
-    v |= bmFR_MC_RESET_TX;
-  if (g_rx_reset)
-    v |= bmFR_MC_RESET_RX;
-  regval[3] = v;
-
-  fpga_write_reg (FR_MASTER_CTRL, regval);
-}
-
-// Resets both AD9862's and the FPGA serial bus interface.
-
-void
-fpga_set_reset (unsigned char on)
-{
-  on &= 0x1;
-
-  if (on){
-    USRP_PC &= ~bmPC_nRESET;		// active low
-    g_tx_enable = 0;
-    g_rx_enable = 0;
-    g_tx_reset = 0;
-    g_rx_reset = 0;
-  }
-  else
-    USRP_PC |= bmPC_nRESET;
-}
-
-void
-fpga_set_tx_enable (unsigned char on)
-{
-  on &= 0x1;
-  g_tx_enable = on;
-
-  write_fpga_master_ctrl ();
-
-  if (on){
-    g_tx_underrun = 0;
-    fpga_clear_flags ();
-  }
-}
-
-void
-fpga_set_rx_enable (unsigned char on)
-{
-  on &= 0x1;
-  g_rx_enable = on;
-  
-  write_fpga_master_ctrl ();
-  if (on){
-    g_rx_overrun = 0;
-    fpga_clear_flags ();
-  }
-}
-
-void
-fpga_set_tx_reset (unsigned char on)
-{
-  on &= 0x1;
-  g_tx_reset = on;
-
-  write_fpga_master_ctrl ();
-}
-
-void
-fpga_set_rx_reset (unsigned char on)
-{
-  on &= 0x1;
-  g_rx_reset = on;
-  
-  write_fpga_master_ctrl ();
-}

firmware/fx2/usrp1/fpga_rev2.h

@@ -1,58 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003,2004 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#ifndef INCLUDED_FPGA_REV1_H
-#define INCLUDED_FPGA_REV1_H
-
-void fpga_set_reset (unsigned char v);
-void fpga_set_tx_enable (unsigned char v);
-void fpga_set_rx_enable (unsigned char v);
-void fpga_set_tx_reset (unsigned char v);
-void fpga_set_rx_reset (unsigned char v);
-
-unsigned char fpga_has_room_for_packet (void);
-unsigned char fpga_has_packet_avail (void);
-
-#if (UC_BOARD_HAS_FPGA)
-/*
- * return TRUE iff FPGA internal fifo has room for 512 bytes.
- */
-#define fpga_has_room_for_packet()	(GPIFREADYSTAT & bmFPGA_HAS_SPACE)
-
-/*
- * return TRUE iff FPGA internal fifo has at least 512 bytes available.
- */
-#define fpga_has_packet_avail()		(GPIFREADYSTAT & bmFPGA_PKT_AVAIL)
-
-#else	/* no FPGA on board.  fake it. */
-
-#define fpga_has_room_for_packet()	TRUE
-#define	fpga_has_packet_avail()		TRUE
-
-#endif
-
-#define	fpga_clear_flags()				\
-	do {						\
-	  USRP_PE |= bmPE_FPGA_CLR_STATUS;		\
-	  USRP_PE &= ~bmPE_FPGA_CLR_STATUS;		\
-        } while (0)
-
-
-#endif /* INCLUDED_FPGA_REV1_H */

firmware/fx2/usrp1/gpif.c

@@ -1,292 +0,0 @@
-// This program configures the General Programmable Interface (GPIF) for FX2.     
-// Please do not modify sections of text which are marked as "DO NOT EDIT ...". 
-//                                                                                
-// DO NOT EDIT ...                  
-// GPIF Initialization              
-// Interface Timing      Async        
-// Internal Ready Init   IntRdy=1     
-// CTL Out Tristate-able Binary       
-// SingleWrite WF Select     1     
-// SingleRead WF Select      0     
-// FifoWrite WF Select       3     
-// FifoRead WF Select        2     
-// Data Bus Idle Drive   Tristate     
-// END DO NOT EDIT                  
-                                    
-// DO NOT EDIT ...       
-// GPIF Wave Names       
-// Wave 0   = singlerd     
-// Wave 1   = singlewr     
-// Wave 2   = FIFORd       
-// Wave 3   = FIFOWr       
-                         
-// GPIF Ctrl Outputs   Level   
-// CTL 0    = WEN#     CMOS        
-// CTL 1    = REN#     CMOS        
-// CTL 2    = OE#      CMOS        
-// CTL 3    = CLRST    CMOS        
-// CTL 4    = unused   CMOS        
-// CTL 5    = BOGUS    CMOS        
-                               
-// GPIF Rdy Inputs         
-// RDY0     = EF#            
-// RDY1     = FF#            
-// RDY2     = unused         
-// RDY3     = unused         
-// RDY4     = unused         
-// RDY5     = TCXpire        
-// FIFOFlag = FIFOFlag       
-// IntReady = IntReady       
-// END DO NOT EDIT         
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 0: singlerd                                                                
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data            
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A                                                                                
-//   LFunc                                                                                 
-//   Term B                                                                                
-// Branch1                                                                                 
-// Branch0                                                                                 
-// Re-Exec                                                                                 
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 1: singlewr                                                                
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate           
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A           EF#                                                                  
-//   LFunc            AND                                                                  
-//   Term B           EF#                                                                  
-// Branch1            ThenIdle                                                             
-// Branch0            ElseIdle                                                             
-// Re-Exec            No                                                                   
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         1         1         1         1         1         1         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 2: FIFORd                                                                  
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data            
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1             
-//   Term A           TCXpire             TCXpire                                          
-//   LFunc            AND                 AND                                              
-//   Term B           TCXpire             TCXpire                                          
-// Branch1            Then 2              ThenIdle                                         
-// Branch0            Else 1              ElseIdle                                         
-// Re-Exec            No                  No                                               
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         1         0         0         0         0         0         0         0    
-// OE#          1         1         1         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 3: FIFOWr                                                                  
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate           
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A           TCXpire                                                              
-//   LFunc            AND                                                                  
-//   Term B           TCXpire                                                              
-// Branch1            ThenIdle                                                             
-// Branch0            Else 1                                                               
-// Re-Exec            No                                                                   
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-                                              
-// GPIF Program Code                          
-                                              
-// DO NOT EDIT ...                            
-#include "fx2.h"                            
-#include "fx2regs.h"                        
-#include "fx2sdly.h"     // SYNCDELAY macro 
-// END DO NOT EDIT                            
-                                              
-// DO NOT EDIT ...                     
-const char xdata WaveData[128] =     
-{                                      
-// Wave 0 
-/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-// Wave 1 
-/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
-/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,
-/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-// Wave 2 
-/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,
-/* Output*/ 0x06,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,
-// Wave 3 
-/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
-/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-};                     
-// END DO NOT EDIT     
-                       
-// DO NOT EDIT ...                     
-const char xdata FlowStates[36] =   
-{                                      
-/* Wave 0 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* Wave 1 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* Wave 2 FlowStates */ 0x81,0x2D,0x26,0x00,0x04,0x04,0x03,0x02,0x00,
-/* Wave 3 FlowStates */ 0x81,0x2D,0x21,0x00,0x04,0x04,0x03,0x02,0x00,
-};                     
-// END DO NOT EDIT     
-                       
-// DO NOT EDIT ...                                               
-const char xdata InitData[7] =                                   
-{                                                                
-/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00     
-};                                                               
-// END DO NOT EDIT                                               
-                                                                 
-// TO DO: You may add additional code below.
-
-void GpifInit( void )
-{
-  BYTE i;
- 
-  // Registers which require a synchronization delay, see section 15.14
-  // FIFORESET        FIFOPINPOLAR
-  // INPKTEND         OUTPKTEND
-  // EPxBCH:L         REVCTL
-  // GPIFTCB3         GPIFTCB2
-  // GPIFTCB1         GPIFTCB0
-  // EPxFIFOPFH:L     EPxAUTOINLENH:L
-  // EPxFIFOCFG       EPxGPIFFLGSEL
-  // PINFLAGSxx       EPxFIFOIRQ
-  // EPxFIFOIE        GPIFIRQ
-  // GPIFIE           GPIFADRH:L
-  // UDMACRCH:L       EPxGPIFTRIG
-  // GPIFTRIG
-  
-  // Note: The pre-REVE EPxGPIFTCH/L register are affected, as well...
-  //      ...these have been replaced by GPIFTC[B3:B0] registers
- 
-  // 8051 doesn't have access to waveform memories 'til
-  // the part is in GPIF mode.
- 
-  IFCONFIG = 0xEE;
-  // IFCLKSRC=1   , FIFOs executes on internal clk source
-  // xMHz=1       , 48MHz internal clk rate
-  // IFCLKOE=0    , Don't drive IFCLK pin signal at 48MHz
-  // IFCLKPOL=0   , Don't invert IFCLK pin signal from internal clk
-  // ASYNC=1      , master samples asynchronous
-  // GSTATE=1     , Drive GPIF states out on PORTE[2:0], debug WF
-  // IFCFG[1:0]=10, FX2 in GPIF master mode
- 
-  GPIFABORT = 0xFF;  // abort any waveforms pending
- 
-  GPIFREADYCFG = InitData[ 0 ];
-  GPIFCTLCFG = InitData[ 1 ];
-  GPIFIDLECS = InitData[ 2 ];
-  GPIFIDLECTL = InitData[ 3 ];
-  GPIFWFSELECT = InitData[ 5 ];
-  GPIFREADYSTAT = InitData[ 6 ];
- 
-  // use dual autopointer feature... 
-  AUTOPTRSETUP = 0x07;          // inc both pointers, 
-                                // ...warning: this introduces pdata hole(s)
-                                // ...at E67B (XAUTODAT1) and E67C (XAUTODAT2)
-  
-  // source
-  AUTOPTRH1 = MSB( &WaveData );
-  AUTOPTRL1 = LSB( &WaveData );
-  
-  // destination
-  AUTOPTRH2 = 0xE4;
-  AUTOPTRL2 = 0x00;
- 
-  // transfer
-  for ( i = 0x00; i < 128; i++ )
-  {
-    EXTAUTODAT2 = EXTAUTODAT1;
-  }
- 
-// Configure GPIF Address pins, output initial value,
-  PORTCCFG = 0xFF;    // [7:0] as alt. func. GPIFADR[7:0]
-  OEC = 0xFF;         // and as outputs
-  PORTECFG |= 0x80;   // [8] as alt. func. GPIFADR[8]
-  OEE |= 0x80;        // and as output
- 
-// ...OR... tri-state GPIFADR[8:0] pins
-//  PORTCCFG = 0x00;  // [7:0] as port I/O
-//  OEC = 0x00;       // and as inputs
-//  PORTECFG &= 0x7F; // [8] as port I/O
-//  OEE &= 0x7F;      // and as input
- 
-// GPIF address pins update when GPIFADRH/L written
-  SYNCDELAY;                    // 
-  GPIFADRH = 0x00;    // bits[7:1] always 0
-  SYNCDELAY;                    // 
-  GPIFADRL = 0x00;    // point to PERIPHERAL address 0x0000
- 
-// Configure GPIF FlowStates registers for Wave 0 of WaveData
-  FLOWSTATE = FlowStates[ 0 ];
-  FLOWLOGIC = FlowStates[ 1 ];
-  FLOWEQ0CTL = FlowStates[ 2 ];
-  FLOWEQ1CTL = FlowStates[ 3 ];
-  FLOWHOLDOFF = FlowStates[ 4 ];
-  FLOWSTB = FlowStates[ 5 ];
-  FLOWSTBEDGE = FlowStates[ 6 ];
-  FLOWSTBHPERIOD = FlowStates[ 7 ];
-}
- 

firmware/fx2/usrp1/usb_descriptors.a51

@@ -1,404 +0,0 @@
-;;; -*- asm -*-
-;;;
-;;; Copyright 2003 Free Software Foundation, Inc.
-;;; 
-;;; This file is part of GNU Radio
-;;; 
-;;; GNU Radio is free software; you can redistribute it and/or modify
-;;; it under the terms of the GNU General Public License as published by
-;;; the Free Software Foundation; either version 3, or (at your option)
-;;; any later version.
-;;; 
-;;; GNU Radio is distributed in the hope that it will be useful,
-;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;;; GNU General Public License for more details.
-;;; 
-;;; You should have received a copy of the GNU General Public License
-;;; along with GNU Radio; see the file COPYING.  If not, write to
-;;; the Free Software Foundation, Inc., 51 Franklin Street,
-;;; Boston, MA 02110-1301, USA.
-;;;
-	
-;;; USB Descriptor table for the USRP
-;;; 
-;;; We're a high-speed only device (480 Mb/sec) with 1 configuration
-;;; and 3 interfaces.  
-;;; 
-;;;	interface 0:	command and status (ep0 COMMAND)
-;;;	interface 1:	Transmit path (ep2 OUT BULK)
-;;;	interface 2:	Receive path (ep6 IN BULK)
-
-	.module usb_descriptors
-	
-	VID_FREE	 = 0xfffe	; Free Software Folks
-	PID_USRP	 = 0x0002	; USRP
-
-	;; We distinguish configured from unconfigured USRPs using the Device ID.
-	;; If the MSB of the DID is 0, the device is unconfigured.
-	;; The LSB of the DID is reserved for hardware revs.
-	
-	DID_USRP	 = 0x0100	; Device ID (bcd)
-
-	
-	DSCR_DEVICE	 =   1	; Descriptor type: Device
-	DSCR_CONFIG	 =   2	; Descriptor type: Configuration
-	DSCR_STRING	 =   3	; Descriptor type: String
-	DSCR_INTRFC	 =   4	; Descriptor type: Interface
-	DSCR_ENDPNT	 =   5	; Descriptor type: Endpoint
-	DSCR_DEVQUAL	 =   6	; Descriptor type: Device Qualifier
-	
-	DSCR_DEVICE_LEN	 =  18
-	DSCR_CONFIG_LEN  =   9
-	DSCR_INTRFC_LEN  =   9
-	DSCR_ENDPNT_LEN  =   7
-	DSCR_DEVQUAL_LEN =  10
-	
-	ET_CONTROL	 =   0	; Endpoint type: Control
-	ET_ISO		 =   1	; Endpoint type: Isochronous
-	ET_BULK		 =   2	; Endpoint type: Bulk
-	ET_INT		 =   3	; Endpoint type: Interrupt
-	
-	
-	;; configuration attributes
-	bmSELF_POWERED	=	1 << 6
-
-;;; --------------------------------------------------------
-;;;	external ram data
-;;;--------------------------------------------------------
-	
-	.area USBDESCSEG    (XDATA)
-	
-;;; ----------------------------------------------------------------
-;;; descriptors used when operating at high speed (480Mb/sec)
-;;; ----------------------------------------------------------------
-	
-	.even	; descriptors must be 2-byte aligned for SUDPTR{H,L} to work
-
-	;; The .even directive isn't really honored by the linker.  Bummer!
-	;; (There's no way to specify an alignment requirement for a given area,
-	;; hence when they're concatenated together, even doesn't work.)
-	;; 
-	;; We work around this by telling the linker to put USBDESCSEG
-	;; at 0xE000 absolute.  This means that the maximimum length of this
-	;; segment is 480 bytes, leaving room for the two hash slots 
-	;; at 0xE1EO to 0xE1FF.  
-	;; 
-	;; As of July 7, 2004, this segment is 326 bytes long
-	
-_high_speed_device_descr::
-	.db	DSCR_DEVICE_LEN
-	.db	DSCR_DEVICE
-	.db	<0x0200		; Specification version (LSB)
-	.db	>0x0200		; Specification version (MSB)
-	.db	0xff		; device class (vendor specific)
-	.db	0xff		; device subclass (vendor specific)
-	.db	0xff		; device protocol (vendor specific)
-	.db	64		; bMaxPacketSize0 for endpoint 0
-	.db	<VID_FREE	; idVendor
-	.db	>VID_FREE	; idVendor
-	.db	<PID_USRP	; idProduct
-	.db	>PID_USRP	; idProduct
-_usb_desc_hw_rev_binary_patch_location_0::
-	.db	<DID_USRP	; bcdDevice
-	.db	>DID_USRP	; bcdDevice
-	.db	SI_VENDOR	; iManufacturer (string index)
-	.db	SI_PRODUCT	; iProduct (string index)
-	.db	SI_SERIAL	; iSerial number (string index)
-	.db	1		; bNumConfigurations
-	
-;;; describes the other speed (12Mb/sec)
-	.even
-_high_speed_devqual_descr::
-	.db	DSCR_DEVQUAL_LEN
-	.db	DSCR_DEVQUAL
-	.db	<0x0200		; bcdUSB (LSB)
-	.db	>0x0200		; bcdUSB (MSB)
-	.db	0xff		; bDeviceClass
-	.db	0xff		; bDeviceSubClass
-	.db	0xff		; bDeviceProtocol
-	.db	64		; bMaxPacketSize0
-	.db	1		; bNumConfigurations (one config at 12Mb/sec)
-	.db	0		; bReserved
-	
-	.even
-_high_speed_config_descr::	
-	.db	DSCR_CONFIG_LEN
-	.db	DSCR_CONFIG
-	.db	<(_high_speed_config_descr_end - _high_speed_config_descr) ; LSB
-	.db	>(_high_speed_config_descr_end - _high_speed_config_descr) ; MSB
-	.db	3		; bNumInterfaces
-	.db	1		; bConfigurationValue
-	.db	0		; iConfiguration
-	.db	0x80 | bmSELF_POWERED ; bmAttributes
-	.db	0		; bMaxPower
-
-	;; interface descriptor 0 (command & status, ep0 COMMAND)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	0		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	0		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
-
-	;; interface descriptor 1 (transmit path, ep2 OUT BULK)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	1		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	1		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_TX_PATH	; iInterface (description)
-
-	;; interface 1's end point
-
-	.db	DSCR_ENDPNT_LEN
-	.db	DSCR_ENDPNT
-	.db	0x02		; bEndpointAddress (ep 2 OUT)
-	.db	ET_BULK		; bmAttributes
-	.db	<512		; wMaxPacketSize (LSB)
-	.db	>512		; wMaxPacketSize (MSB)
-	.db	0		; bInterval (iso only)
-
-	;; interface descriptor 2 (receive path, ep6 IN BULK)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	2		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	1		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_RX_PATH	; iInterface (description)
-
-	;; interface 2's end point
-
-	.db	DSCR_ENDPNT_LEN
-	.db	DSCR_ENDPNT
-	.db	0x86		; bEndpointAddress (ep 6 IN)
-	.db	ET_BULK		; bmAttributes
-	.db	<512		; wMaxPacketSize (LSB)
-	.db	>512		; wMaxPacketSize (MSB)
-	.db	0		; bInterval (iso only)
-
-_high_speed_config_descr_end:		
-
-;;; ----------------------------------------------------------------
-;;; descriptors used when operating at full speed (12Mb/sec)
-;;; ----------------------------------------------------------------
-
-	.even
-_full_speed_device_descr::	
-	.db	DSCR_DEVICE_LEN
-	.db	DSCR_DEVICE
-	.db	<0x0200		; Specification version (LSB)
-	.db	>0x0200		; Specification version (MSB)
-	.db	0xff		; device class (vendor specific)
-	.db	0xff		; device subclass (vendor specific)
-	.db	0xff		; device protocol (vendor specific)
-	.db	64		; bMaxPacketSize0 for endpoint 0
-	.db	<VID_FREE	; idVendor
-	.db	>VID_FREE	; idVendor
-	.db	<PID_USRP	; idProduct
-	.db	>PID_USRP	; idProduct
-_usb_desc_hw_rev_binary_patch_location_1::
-	.db	<DID_USRP	; bcdDevice
-	.db	>DID_USRP	; bcdDevice
-	.db	SI_VENDOR	; iManufacturer (string index)
-	.db	SI_PRODUCT	; iProduct (string index)
-	.db	SI_NONE		; iSerial number (None)
-	.db	1		; bNumConfigurations
-	
-	
-;;; describes the other speed (480Mb/sec)
-	.even
-_full_speed_devqual_descr::
-	.db	DSCR_DEVQUAL_LEN
-	.db	DSCR_DEVQUAL
-	.db	<0x0200		; bcdUSB
-	.db	>0x0200		; bcdUSB
-	.db	0xff		; bDeviceClass
-	.db	0xff		; bDeviceSubClass
-	.db	0xff		; bDeviceProtocol
-	.db	64		; bMaxPacketSize0
-	.db	1		; bNumConfigurations (one config at 480Mb/sec)
-	.db	0		; bReserved
-	
-	.even
-_full_speed_config_descr::	
-	.db	DSCR_CONFIG_LEN
-	.db	DSCR_CONFIG
-	.db	<(_full_speed_config_descr_end - _full_speed_config_descr) ; LSB
-	.db	>(_full_speed_config_descr_end - _full_speed_config_descr) ; MSB
-	.db	1		; bNumInterfaces
-	.db	1		; bConfigurationValue
-	.db	0		; iConfiguration
-	.db	0x80 | bmSELF_POWERED ; bmAttributes
-	.db	0		; bMaxPower
-
-	;; interface descriptor 0 (command & status, ep0 COMMAND)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	0		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	0		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
-	
-_full_speed_config_descr_end:	
-	
-;;; ----------------------------------------------------------------
-;;;			string descriptors
-;;; ----------------------------------------------------------------
-
-_nstring_descriptors::
-	.db	(_string_descriptors_end - _string_descriptors) / 2
-
-_string_descriptors::
-	.db	<str0, >str0
-	.db	<str1, >str1
-	.db	<str2, >str2
-	.db	<str3, >str3
-	.db	<str4, >str4
-	.db	<str5, >str5
-	.db	<str6, >str6
-_string_descriptors_end:
-
-	SI_NONE = 0
-	;; str0 contains the language ID's.
-	.even
-str0:	.db	str0_end - str0
-	.db	DSCR_STRING
-	.db	0
-	.db	0
-	.db	<0x0409		; magic code for US English (LSB)
-	.db	>0x0409		; magic code for US English (MSB)
-str0_end:
-
-	SI_VENDOR = 1
-	.even
-str1:	.db	str1_end - str1
-	.db	DSCR_STRING
-	.db	'F, 0		; 16-bit unicode
-	.db	'r, 0
-	.db	'e, 0
-	.db	'e, 0
-	.db	' , 0
-	.db	'S, 0
-	.db	'o, 0
-	.db	'f, 0
-	.db	't, 0
-	.db	'w, 0
-	.db	'a, 0
-	.db	'r, 0
-	.db	'e, 0
-	.db	' , 0
-	.db	'F, 0
-	.db	'o, 0
-	.db	'l, 0
-	.db	'k, 0
-	.db	's, 0
-str1_end:
-
-	SI_PRODUCT = 2
-	.even
-str2:	.db	str2_end - str2
-	.db	DSCR_STRING
-	.db	'U, 0
-	.db	'S, 0
-	.db	'R, 0
-	.db	'P, 0
-	.db	' , 0
-	.db	'R, 0
-	.db	'e, 0
-	.db	'v, 0
-	.db	' , 0
-_usb_desc_hw_rev_ascii_patch_location_0::
-	.db	'?, 0
-str2_end:
-
-	SI_COMMAND_AND_STATUS = 3
-	.even
-str3:	.db	str3_end - str3
-	.db	DSCR_STRING
-	.db	'C, 0
-	.db	'o, 0
-	.db	'm, 0
-	.db	'm, 0
-	.db	'a, 0
-	.db	'n, 0
-	.db	'd, 0
-	.db	' , 0
-	.db	'&, 0
-	.db	' , 0
-	.db	'S, 0
-	.db	't, 0
-	.db	'a, 0
-	.db	't, 0
-	.db	'u, 0
-	.db	's, 0
-str3_end:
-
-	SI_TX_PATH = 4
-	.even
-str4:	.db	str4_end - str4
-	.db	DSCR_STRING
-	.db	'T, 0
-	.db	'r, 0
-	.db	'a, 0
-	.db	'n, 0
-	.db	's, 0
-	.db	'm, 0
-	.db	'i, 0
-	.db	't, 0
-	.db	' , 0
-	.db	'P, 0
-	.db	'a, 0
-	.db	't, 0
-	.db	'h, 0
-str4_end:
-
-	SI_RX_PATH = 5
-	.even
-str5:	.db	str5_end - str5
-	.db	DSCR_STRING
-	.db	'R, 0
-	.db	'e, 0
-	.db	'c, 0
-	.db	'e, 0
-	.db	'i, 0
-	.db	'v, 0
-	.db	'e, 0
-	.db	' , 0
-	.db	'P, 0
-	.db	'a, 0
-	.db	't, 0
-	.db	'h, 0
-str5_end:
-
-	SI_SERIAL = 6
-	.even
-str6:	.db	str6_end - str6
-	.db	DSCR_STRING
-_usb_desc_serial_number_ascii::
-	.db	'3, 0
-	.db	'., 0
-	.db	'1, 0
-	.db	'4, 0
-	.db	'1, 0
-	.db	'5, 0
-	.db	'9, 0
-	.db	'3, 0
-str6_end:
-

firmware/fx2/usrp1/usrp_common.c

@@ -1,109 +0,0 @@
-/*
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-/* 
- * common code for USRP
- */
-
-#include "usrp_common.h"
-
-void init_board (void);
-
-void
-init_usrp (void)
-{
-  CPUCS = bmCLKSPD1;	// CPU runs @ 48 MHz
-  CKCON = 0;		// MOVX takes 2 cycles
-
-  // IFCLK is generated internally and runs at 48 MHz; GPIF "master mode"
-
-  IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE | bmIFCLKPOL | bmIFGPIF;
-  SYNCDELAY;
-
-  // configure IO ports (B and D are used by GPIF)
-
-  IOA = bmPORT_A_INITIAL;	// Port A initial state
-  OEA = bmPORT_A_OUTPUTS;	// Port A direction register
-
-  IOC = bmPORT_C_INITIAL;	// Port C initial state
-  OEC = bmPORT_C_OUTPUTS;	// Port C direction register
-
-  IOE = bmPORT_E_INITIAL;	// Port E initial state
-  OEE = bmPORT_E_OUTPUTS;	// Port E direction register
-
-
-  // REVCTL = bmDYN_OUT | bmENH_PKT;			// highly recommended by docs
-  // SYNCDELAY;
-  
-  // configure end points
-
-  EP1OUTCFG = bmVALID | bmBULK;				SYNCDELAY;
-  EP1INCFG  = bmVALID | bmBULK | bmIN;			SYNCDELAY;
-
-  EP2CFG    = bmVALID | bmBULK | bmQUADBUF;		SYNCDELAY;	// 512 quad bulk OUT
-  EP4CFG    = 0;					SYNCDELAY;	// disabled
-  EP6CFG    = bmVALID | bmBULK | bmQUADBUF | bmIN;	SYNCDELAY;	// 512 quad bulk IN
-  EP8CFG    = 0;					SYNCDELAY;	// disabled
-
-  // reset FIFOs
-
-  FIFORESET = bmNAKALL;					SYNCDELAY;
-  FIFORESET = 2;					SYNCDELAY;
-  // FIFORESET = 4;					SYNCDELAY;
-  FIFORESET = 6;					SYNCDELAY;
-  // FIFORESET = 8;					SYNCDELAY;
-  FIFORESET = 0;					SYNCDELAY;
-  
-  // configure end point FIFOs
-
-  // let core see 0 to 1 transistion of autoout bit
-
-  EP2FIFOCFG =             bmWORDWIDE;			SYNCDELAY;
-  EP2FIFOCFG = bmAUTOOUT | bmWORDWIDE;			SYNCDELAY;
-  EP6FIFOCFG = bmAUTOIN  | bmWORDWIDE;			SYNCDELAY;
-
-
-  // prime the pump 
-
-#if 0
-  EP2BCL  = 0x80;		SYNCDELAY;
-  EP2BCL  = 0x80;		SYNCDELAY;
-  EP2BCL  = 0x80;		SYNCDELAY;
-  EP2BCL  = 0x80;		SYNCDELAY;
-#endif
-
-  EP0BCH = 0;			SYNCDELAY;
-
-  // arm EP1OUT so we can receive "out" packets (TRM pg 8-8)
-
-  EP1OUTBC = 0;			SYNCDELAY;
-
-  EP2GPIFFLGSEL = 0x01;		SYNCDELAY; // For EP2OUT, GPIF uses EF flag
-  EP6GPIFFLGSEL = 0x02;		SYNCDELAY; // For EP6IN,  GPIF uses FF flag
-
-  // set autoin length for EP6
-  // FIXME should be f(enumeration)
-
-  EP6AUTOINLENH = (512) >> 8;	SYNCDELAY;  // this is the length for high speed
-  EP6AUTOINLENL = (512) & 0xff; SYNCDELAY;
-
-  init_board ();
-}
-

firmware/fx2/usrp1/usrp_gpif.c

@@ -1,206 +0,0 @@
-/*
- * Machine generated by "edit-gpif".  Do not edit by hand.
- */
-
-// This program configures the General Programmable Interface (GPIF) for FX2.
-// Please do not modify sections of text which are marked as "DO NOT EDIT ...".
-//
-// DO NOT EDIT ...
-// GPIF Initialization
-// Interface Timing      Async
-// Internal Ready Init   IntRdy=1
-// CTL Out Tristate-able Binary
-// SingleWrite WF Select     1
-// SingleRead WF Select      0
-// FifoWrite WF Select       3
-// FifoRead WF Select        2
-// Data Bus Idle Drive   Tristate
-// END DO NOT EDIT
-
-// DO NOT EDIT ...
-// GPIF Wave Names
-// Wave 0   = singlerd
-// Wave 1   = singlewr
-// Wave 2   = FIFORd
-// Wave 3   = FIFOWr
-
-// GPIF Ctrl Outputs   Level
-// CTL 0    = WEN#     CMOS
-// CTL 1    = REN#     CMOS
-// CTL 2    = OE#      CMOS
-// CTL 3    = CLRST    CMOS
-// CTL 4    = unused   CMOS
-// CTL 5    = BOGUS    CMOS
-
-// GPIF Rdy Inputs
-// RDY0     = EF#
-// RDY1     = FF#
-// RDY2     = unused
-// RDY3     = unused
-// RDY4     = unused
-// RDY5     = TCXpire
-// FIFOFlag = FIFOFlag
-// IntReady = IntReady
-// END DO NOT EDIT
-// DO NOT EDIT ...
-//
-// GPIF Waveform 0: singlerd
-//
-// Interval     0         1         2         3         4         5         6     Idle (7)
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val
-// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int
-// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1
-//   Term A
-//   LFunc
-//   Term B
-// Branch1
-// Branch0
-// Re-Exec
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default
-// WEN#         0         0         0         0         0         0         0         0
-// REN#         0         0         0         0         0         0         0         0
-// OE#          0         0         0         0         0         0         0         0
-// CLRST        0         0         0         0         0         0         0         0
-// unused       0         0         0         0         0         0         0         0
-// BOGUS        0         0         0         0         0         0         0         0
-//
-// END DO NOT EDIT
-// DO NOT EDIT ...
-//
-// GPIF Waveform 1: singlewr
-//
-// Interval     0         1         2         3         4         5         6     Idle (7)
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val
-// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int
-// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1
-//   Term A           EF#
-//   LFunc            AND
-//   Term B           EF#
-// Branch1            ThenIdle
-// Branch0            ElseIdle
-// Re-Exec            No
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default
-// WEN#         0         1         1         1         1         1         1         0
-// REN#         0         0         0         0         0         0         0         0
-// OE#          0         0         0         0         0         0         0         0
-// CLRST        0         0         0         0         0         0         0         0
-// unused       0         0         0         0         0         0         0         0
-// BOGUS        0         0         0         0         0         0         0         0
-//
-// END DO NOT EDIT
-// DO NOT EDIT ...
-//
-// GPIF Waveform 2: FIFORd
-//
-// Interval     0         1         2         3         4         5         6     Idle (7)
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val
-// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int
-// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1
-//   Term A           TCXpire             TCXpire
-//   LFunc            AND                 AND
-//   Term B           TCXpire             TCXpire
-// Branch1            Then 2              ThenIdle
-// Branch0            Else 1              ElseIdle
-// Re-Exec            No                  No
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default
-// WEN#         0         0         0         0         0         0         0         0
-// REN#         1         0         0         0         0         0         0         0
-// OE#          1         1         1         0         0         0         0         0
-// CLRST        0         0         0         0         0         0         0         0
-// unused       0         0         0         0         0         0         0         0
-// BOGUS        0         0         0         0         0         0         0         0
-//
-// END DO NOT EDIT
-// DO NOT EDIT ...
-//
-// GPIF Waveform 3: FIFOWr
-//
-// Interval     0         1         2         3         4         5         6     Idle (7)
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val
-// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int
-// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1
-//   Term A           TCXpire
-//   LFunc            AND
-//   Term B           TCXpire
-// Branch1            ThenIdle
-// Branch0            Else 1
-// Re-Exec            No
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default
-// WEN#         0         0         0         0         0         0         0         0
-// REN#         0         0         0         0         0         0         0         0
-// OE#          0         0         0         0         0         0         0         0
-// CLRST        0         0         0         0         0         0         0         0
-// unused       0         0         0         0         0         0         0         0
-// BOGUS        0         0         0         0         0         0         0         0
-//
-// END DO NOT EDIT
-
-// GPIF Program Code
-
-// DO NOT EDIT ...
-// #include "fx2.h"
-// #include "fx2regs.h"
-// #include "fx2sdly.h"     // SYNCDELAY macro
-// END DO NOT EDIT
-
-// DO NOT EDIT ...
-const char WaveData[128] =
-{
-// Wave 0
-/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-// Wave 1
-/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
-/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,
-/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-// Wave 2
-/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,
-/* Output*/ 0x06,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,
-// Wave 3
-/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
-/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-};
-// END DO NOT EDIT
-
-// DO NOT EDIT ...
-const char FlowStates[36] =
-{
-/* Wave 0 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* Wave 1 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* Wave 2 FlowStates */ 0x81,0x2D,0x26,0x00,0x04,0x04,0x03,0x02,0x00,
-/* Wave 3 FlowStates */ 0x81,0x2D,0x21,0x00,0x04,0x04,0x03,0x02,0x00,
-};
-// END DO NOT EDIT
-
-// DO NOT EDIT ...
-const char InitData[7] =
-{
-/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00
-};
-// END DO NOT EDIT
-
-// TO DO: You may add additional code below.
-

firmware/fx2/usrp1/usrp_gpif_inline.h

@@ -1,27 +0,0 @@
-/*
- * Machine generated by "edit-gpif".  Do not edit by hand.
- */
-
-#define setup_flowstate_common()	\
-do {					\
-     FLOWSTATE = 0x81;			\
-     FLOWLOGIC = 0x2d;			\
-    FLOWEQ0CTL = 0x26;			\
-    FLOWEQ1CTL = 0x00;			\
-   FLOWHOLDOFF = 0x04;			\
-       FLOWSTB = 0x04;			\
-   FLOWSTBEDGE = 0x03;			\
-FLOWSTBHPERIOD = 0x02;			\
-GPIFHOLDAMOUNT = 0x00;			\
-} while (0)
-
-#define setup_flowstate_read()	\
-do {					\
-    FLOWEQ0CTL = 0x26;			\
-} while (0)
-
-#define setup_flowstate_write()	\
-do {					\
-    FLOWEQ0CTL = 0x21;			\
-} while (0)
-

firmware/fx2/usrp1/usrp_main.c

@@ -1,381 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003,2004 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-#include "usrp_regs.h"
-#include "usrp_commands.h"
-#include "fpga.h"
-#include "usrp_gpif_inline.h"
-#include "timer.h"
-#include "i2c.h"
-#include "isr.h"
-#include "usb_common.h"
-#include "fx2utils.h"
-#include "usrp_globals.h"
-#include "usrp_i2c_addr.h"
-#include <string.h>
-#include "spi.h"
-#include "eeprom_io.h"
-#include "usb_descriptors.h"
-
-/*
- * offsets into boot eeprom for configuration values
- */
-#define	HW_REV_OFFSET		  5
-#define SERIAL_NO_OFFSET	248
-#define SERIAL_NO_LEN		  8
-
-
-#define	bRequestType	SETUPDAT[0]
-#define	bRequest	SETUPDAT[1]
-#define	wValueL		SETUPDAT[2]
-#define	wValueH		SETUPDAT[3]
-#define	wIndexL		SETUPDAT[4]
-#define	wIndexH		SETUPDAT[5]
-#define	wLengthL	SETUPDAT[6]
-#define	wLengthH	SETUPDAT[7]
-
-
-unsigned char g_tx_enable = 0;
-unsigned char g_rx_enable = 0;
-unsigned char g_rx_overrun = 0;
-unsigned char g_tx_underrun = 0;
-
-/*
- * the host side fpga loader code pushes an MD5 hash of the bitstream
- * into hash1.
- */
-#define	  USRP_HASH_SIZE      16
-xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
-
-static void
-get_ep0_data (void)
-{
-  EP0BCL = 0;			// arm EP0 for OUT xfer.  This sets the busy bit
-
-  while (EP0CS & bmEPBUSY)	// wait for busy to clear
-    ;
-}
-
-/*
- * Handle our "Vendor Extension" commands on endpoint 0.
- * If we handle this one, return non-zero.
- */
-unsigned char
-app_vendor_cmd (void)
-{
-  if (bRequestType == VRT_VENDOR_IN){
-
-    /////////////////////////////////
-    //    handle the IN requests
-    /////////////////////////////////
-
-    switch (bRequest){
-
-    case VRQ_GET_STATUS:
-      switch (wIndexL){
-
-      case GS_TX_UNDERRUN:
-	EP0BUF[0] = g_tx_underrun;
-	g_tx_underrun = 0;
-	EP0BCH = 0;
-	EP0BCL = 1;
-	break;
-
-      case GS_RX_OVERRUN:
-	EP0BUF[0] = g_rx_overrun;
-	g_rx_overrun = 0;
-	EP0BCH = 0;
-	EP0BCL = 1;
-	break;
-
-      default:
-	return 0;
-      }
-      break;
-
-    case VRQ_I2C_READ:
-      if (!i2c_read (wValueL, EP0BUF, wLengthL))
-	return 0;
-
-      EP0BCH = 0;
-      EP0BCL = wLengthL;
-      break;
-      
-    case VRQ_SPI_READ:
-      if (!spi_read (wValueH, wValueL, wIndexH, wIndexL, EP0BUF, wLengthL))
-	return 0;
-
-      EP0BCH = 0;
-      EP0BCL = wLengthL;
-      break;
-
-    default:
-      return 0;
-    }
-  }
-
-  else if (bRequestType == VRT_VENDOR_OUT){
-
-    /////////////////////////////////
-    //    handle the OUT requests
-    /////////////////////////////////
-
-    switch (bRequest){
-
-    case VRQ_SET_LED:
-      switch (wIndexL){
-      case 0:
-	set_led_0 (wValueL);
-	break;
-	
-      case 1:
-	set_led_1 (wValueL);
-	break;
-	
-      default:
-	return 0;
-      }
-      break;
-      
-    case VRQ_FPGA_LOAD:
-      switch (wIndexL){			// sub-command
-      case FL_BEGIN:
-	return fpga_load_begin ();
-	
-      case FL_XFER:
-	get_ep0_data ();
-	return fpga_load_xfer (EP0BUF, EP0BCL);
-	
-      case FL_END:
-	return fpga_load_end ();
-	
-      default:
-	return 0;
-      }
-      break;
-      
-
-    case VRQ_FPGA_SET_RESET:
-      fpga_set_reset (wValueL);
-      break;
-      
-    case VRQ_FPGA_SET_TX_ENABLE:
-      fpga_set_tx_enable (wValueL);
-      break;
-      
-    case VRQ_FPGA_SET_RX_ENABLE:
-      fpga_set_rx_enable (wValueL);
-      break;
-
-    case VRQ_FPGA_SET_TX_RESET:
-      fpga_set_tx_reset (wValueL);
-      break;
-      
-    case VRQ_FPGA_SET_RX_RESET:
-      fpga_set_rx_reset (wValueL);
-      break;
-
-    case VRQ_I2C_WRITE:
-      get_ep0_data ();
-      if (!i2c_write (wValueL, EP0BUF, EP0BCL))
-	return 0;
-      break;
-
-    case VRQ_SPI_WRITE:
-      get_ep0_data ();
-      if (!spi_write (wValueH, wValueL, wIndexH, wIndexL, EP0BUF, EP0BCL))
-	return 0;
-      break;
-
-    default:
-      return 0;
-    }
-
-  }
-  else
-    return 0;    // invalid bRequestType
-
-  return 1;
-}
-
-
-
-static void
-main_loop (void)
-{
-  setup_flowstate_common ();
-
-  while (1){
-
-    if (usb_setup_packet_avail ())
-      usb_handle_setup_packet ();
-    
-  
-    if (GPIFTRIG & bmGPIF_IDLE){
-
-      // OK, GPIF is idle.  Let's try to give it some work.
-
-      // First check for underruns and overruns
-
-      if (UC_BOARD_HAS_FPGA && (USRP_PA & (bmPA_TX_UNDERRUN | bmPA_RX_OVERRUN))){
-      
-	// record the under/over run
-	if (USRP_PA & bmPA_TX_UNDERRUN)
-	  g_tx_underrun = 1;
-
-	if (USRP_PA & bmPA_RX_OVERRUN)
-	  g_rx_overrun = 1;
-
-	// tell the FPGA to clear the flags
-	fpga_clear_flags ();
-      }
-
-      // Next see if there are any "OUT" packets waiting for our attention,
-      // and if so, if there's room in the FPGA's FIFO for them.
-
-      if (g_tx_enable && !(EP24FIFOFLGS & 0x02)){  // USB end point fifo is not empty...
-
-	if (fpga_has_room_for_packet ()){	   // ... and FPGA has room for packet
-
-	  GPIFTCB1 = 0x01;	SYNCDELAY;
-	  GPIFTCB0 = 0x00;	SYNCDELAY;
-
-	  setup_flowstate_write ();
-
-	  SYNCDELAY;
-	  GPIFTRIG = bmGPIF_EP2_START | bmGPIF_WRITE; 	// start the xfer
-	  SYNCDELAY;
-
-	  while (!(GPIFTRIG & bmGPIF_IDLE)){
-	    // wait for the transaction to complete
-	  }
-	}
-      }
-
-      // See if there are any requests for "IN" packets, and if so
-      // whether the FPGA's got any packets for us.
-
-      if (g_rx_enable && !(EP6CS & bmEPFULL)){	// USB end point fifo is not full...
-
-	if (fpga_has_packet_avail ()){		// ... and FPGA has packet available
-
-	  GPIFTCB1 = 0x01;	SYNCDELAY;
-	  GPIFTCB0 = 0x00;	SYNCDELAY;
-
-	  setup_flowstate_read ();
-
-	  SYNCDELAY;
-	  GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; 	// start the xfer
-	  SYNCDELAY;
-
-	  while (!(GPIFTRIG & bmGPIF_IDLE)){
-	    // wait for the transaction to complete
-	  }
-
-	  SYNCDELAY;
-	  INPKTEND = 6;	// tell USB we filled buffer (6 is our endpoint num)
-	}
-      }
-    }
-  }
-}
-
-
-/*
- * called at 100 Hz from timer2 interrupt
- *
- * Toggle led 0
- */
-void
-isr_tick (void) interrupt
-{
-  static unsigned char	count = 1;
-  
-  if (--count == 0){
-    count = 50;
-    USRP_LED_REG ^= bmLED0;
-  }
-
-  clear_timer_irq ();
-}
-
-/*
- * Read h/w rev code and serial number out of boot eeprom and
- * patch the usb descriptors with the values.
- */
-void
-patch_usb_descriptors(void)
-{
-  static xdata unsigned char hw_rev;
-  static xdata unsigned char serial_no[8];
-  unsigned char i;
-
-  eeprom_read(I2C_ADDR_BOOT, HW_REV_OFFSET, &hw_rev, 1);	// LSB of device id
-  usb_desc_hw_rev_binary_patch_location_0[0] = hw_rev;
-  usb_desc_hw_rev_binary_patch_location_1[0] = hw_rev;
-  usb_desc_hw_rev_ascii_patch_location_0[0] = hw_rev + '0';     // FIXME if we get > 9
-
-  eeprom_read(I2C_ADDR_BOOT, SERIAL_NO_OFFSET, serial_no, SERIAL_NO_LEN);
-
-  for (i = 0; i < SERIAL_NO_LEN; i++){
-    unsigned char ch = serial_no[i];
-    if (ch == 0xff)	// make unprogrammed EEPROM default to '0'
-      ch = '0';
-    usb_desc_serial_number_ascii[i << 1] = ch;
-  }
-}
-
-void
-main (void)
-{
-#if 0
-  g_rx_enable = 0;	// FIXME (work around initialization bug)
-  g_tx_enable = 0;
-  g_rx_overrun = 0;
-  g_tx_underrun = 0;
-#endif
-
-  memset (hash1, 0, USRP_HASH_SIZE);	// zero fpga bitstream hash.  This forces reload
-  
-  init_usrp ();
-  init_gpif ();
-  
-  // if (UC_START_WITH_GSTATE_OUTPUT_ENABLED)
-  IFCONFIG |= bmGSTATE;			// no conflict, start with it on
-
-  set_led_0 (0);
-  set_led_1 (0);
-  
-  EA = 0;		// disable all interrupts
-
-  patch_usb_descriptors();
-
-  setup_autovectors ();
-  usb_install_handlers ();
-  hook_timer_tick ((unsigned short) isr_tick);
-
-  EIEX4 = 1;		// disable INT4 FIXME
-  EA = 1;		// global interrupt enable
-
-  fx2_renumerate ();	// simulates disconnect / reconnect
-
-  main_loop ();
-}

firmware/fx2/usrp1/usrp_regs.h

@@ -1,163 +0,0 @@
-/*
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-/*
- * These are the register definitions for the Rev 1 USRP prototype
- * The Rev 1 is the version with the AD9862's and daughterboards
- */
-
-#ifndef _USRP_REV1_REGS_H_
-#define _USRP_REV1_REGS_H_
-
-#include "fx2regs.h"
-
-/*
- * Port A (bit addressable):
- */
-
-#define USRP_PA			IOA		// Port A
-#define	USRP_PA_OE		OEA		// Port A direction register
-
-#define bmPA_S_CLK		bmBIT0		// SPI serial clock
-#define	bmPA_S_DATA_TO_PERIPH	bmBIT1		// SPI SDI (peripheral rel name)
-#define bmPA_S_DATA_FROM_PERIPH	bmBIT2		// SPI SDO (peripheral rel name)
-#define bmPA_SEN_FPGA		bmBIT3		// serial enable for FPGA (active low)
-#define	bmPA_SEN_CODEC_A	bmBIT4		// serial enable AD9862 A (active low)
-#define	bmPA_SEN_CODEC_B	bmBIT5		// serial enable AD9862 B (active low)
-//#define bmPA_FX2_2		bmBIT6		// misc pin to FPGA (overflow)
-//#define bmPA_FX2_3		bmBIT7		// misc pin to FPGA (underflow)
-#define	bmPA_RX_OVERRUN		bmBIT6		// misc pin to FPGA (overflow)
-#define	bmPA_TX_UNDERRUN	bmBIT7		// misc pin to FPGA (underflow)
-
-
-sbit at 0x80+0 bitS_CLK;		// 0x80 is the bit address of PORT A
-sbit at 0x80+1 bitS_OUT;		// out from FX2 point of view
-sbit at 0x80+2 bitS_IN;			// in from FX2 point of view
-
-
-/* all outputs except S_DATA_FROM_PERIPH, FX2_2, FX2_3 */
-
-#define	bmPORT_A_OUTPUTS  (bmPA_S_CLK			\
-			   | bmPA_S_DATA_TO_PERIPH	\
-			   | bmPA_SEN_FPGA		\
-			   | bmPA_SEN_CODEC_A		\
-			   | bmPA_SEN_CODEC_B		\
-			   )
-
-#define	bmPORT_A_INITIAL   (bmPA_SEN_FPGA | bmPA_SEN_CODEC_A | bmPA_SEN_CODEC_B)
-
-
-/* Port B: GPIF	FD[7:0]			*/
-
-/*
- * Port C (bit addressable):
- *    5:1 FPGA configuration
- */
-
-#define	USRP_PC			IOC		// Port C
-#define	USRP_PC_OE		OEC		// Port C direction register
-
-#define	USRP_ALTERA_CONFIG	USRP_PC
-
-#define	bmPC_nRESET		bmBIT0		// reset line to codecs (active low)
-#define bmALTERA_DATA0		bmBIT1
-#define bmALTERA_NCONFIG	bmBIT2
-#define bmALTERA_DCLK		bmBIT3
-#define bmALTERA_CONF_DONE	bmBIT4
-#define bmALTERA_NSTATUS	bmBIT5
-#define	bmPC_LED0		bmBIT6		// active low
-#define	bmPC_LED1		bmBIT7		// active low
-
-sbit at 0xA0+1 bitALTERA_DATA0;		// 0xA0 is the bit address of PORT C
-sbit at 0xA0+3 bitALTERA_DCLK;
-
-
-#define	bmALTERA_BITS		(bmALTERA_DATA0			\
-				 | bmALTERA_NCONFIG		\
-				 | bmALTERA_DCLK		\
-				 | bmALTERA_CONF_DONE		\
-				 | bmALTERA_NSTATUS)
-
-#define	bmPORT_C_OUTPUTS	(bmPC_nRESET			\
-				 | bmALTERA_DATA0 		\
-				 | bmALTERA_NCONFIG		\
-				 | bmALTERA_DCLK		\
-				 | bmPC_LED0			\
-				 | bmPC_LED1			\
-				 )
-
-#define	bmPORT_C_INITIAL	(bmPC_LED0 | bmPC_LED1)
-
-
-#define	USRP_LED_REG		USRP_PC
-#define	bmLED0			bmPC_LED0
-#define	bmLED1			bmPC_LED1
-
-
-/* Port D: GPIF	FD[15:8]		*/
-
-/* Port E: not bit addressible		*/
-
-#define	USRP_PE			IOE		// Port E
-#define	USRP_PE_OE		OEE		// Port E direction register
-
-#define bmPE_PE0		bmBIT0		// GPIF debug output
-#define	bmPE_PE1		bmBIT1		// GPIF debug output
-#define	bmPE_PE2		bmBIT2		// GPIF debug output
-#define	bmPE_FPGA_CLR_STATUS	bmBIT3		// misc pin to FPGA (clear status)
-#define	bmPE_SEN_TX_A		bmBIT4		// serial enable d'board TX A (active low)
-#define	bmPE_SEN_RX_A		bmBIT5		// serial enable d'board RX A (active low)
-#define	bmPE_SEN_TX_B		bmBIT6		// serial enable d'board TX B (active low)
-#define bmPE_SEN_RX_B		bmBIT7		// serial enable d'board RX B (active low)
-
-
-#define	bmPORT_E_OUTPUTS	(bmPE_FPGA_CLR_STATUS	\
-				 | bmPE_SEN_TX_A 	\
-				 | bmPE_SEN_RX_A	\
-				 | bmPE_SEN_TX_B	\
-				 | bmPE_SEN_RX_B	\
-				 )
-
-
-#define	bmPORT_E_INITIAL	(bmPE_SEN_TX_A 		\
-				 | bmPE_SEN_RX_A	\
-				 | bmPE_SEN_TX_B	\
-				 | bmPE_SEN_RX_B	\
-				 )
-
-/*
- * FPGA output lines that are tied to FX2 RDYx inputs.
- * These are readable using GPIFREADYSTAT.
- */
-#define	bmFPGA_HAS_SPACE		bmBIT0	// usbrdy[0] has room for 512 byte packet
-#define	bmFPGA_PKT_AVAIL		bmBIT1	// usbrdy[1] has >= 512 bytes available
-// #define	bmTX_UNDERRUN			bmBIT2  // usbrdy[2] D/A ran out of data
-// #define	bmRX_OVERRUN			bmBIT3	// usbrdy[3] A/D ran out of buffer
-
-/*
- * FPGA input lines that are tied to the FX2 CTLx outputs.
- *
- * These are controlled by the GPIF microprogram...
- */
-// WR					bmBIT0	// usbctl[0]
-// RD					bmBIT1	// usbctl[1]
-// OE					bmBIT2	// usbctl[2]
-
-#endif /* _USRP_REV1_REGS_H_ */

firmware/fx2/utils/build_eeprom.py

@@ -1,116 +0,0 @@
-#!/usr/bin/env python
-#
-# Copyright 2004,2006 Free Software Foundation, Inc.
-# 
-# This file is part of GNU Radio
-# 
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-# 
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-# 
-
-import re
-import sys
-import os, os.path
-from optparse import OptionParser
-
-# USB Vendor and Product ID's
-
-USRP1VID = 0xfffe                            # Free Software Folks
-USRP1PID = 0x0002
-USRP1PVID= 0x2500                            # Ettus Research
-USRP1PPID= 0x0002
-    
-def msb (x):
-    return (x >> 8) & 0xff
-
-def lsb (x):
-    return x & 0xff
-
-def build_eeprom_image (filename, rev):
-    """Build a ``C2 Load'' EEPROM image.
-
-    For details on this format, see section 3.4.3 of
-    the EZ-USB FX2 Technical Reference Manual
-    """
-    # get the code we want to run
-    f = open(filename, 'rb')
-    bytes = f.read()
-
-    devid = 4 #for compatibility
-    start_addr = 0 #prove me wrong
-
-    if(rev == 1):
-      VID = USRP1VID
-      PID = USRP1PID
-    else:
-      VID = USRP1PVID
-      PID = USRP1PPID
-
-    rom_header = [
-        0xC2,                           # boot from EEPROM
-        lsb (VID),
-        msb (VID),
-        lsb (PID),
-        msb (PID),
-        lsb (devid),
-        msb (devid),
-        0                               # configuration byte
-        ]
-    
-    # 4 byte header that indicates where to load
-    # the immediately follow code bytes.
-    code_header = [
-        msb (len (bytes)),
-        lsb (len (bytes)),
-        msb (start_addr),
-        lsb (start_addr)
-        ]
-
-    # writes 0 to CPUCS reg (brings FX2 out of reset)
-    trailer = [
-        0x80,
-        0x01,
-        0xe6,
-        0x00,
-        0x00
-        ]
-
-    image = rom_header + code_header + [ord(c) for c in bytes] + trailer
-
-    assert (len (image) <= 256)
-    return image 
-
-if __name__ == '__main__':
-    usage = "usage: %prog -r REV [options] bootfile.bin outfile.bin"
-    parser = OptionParser (usage=usage)
-    parser.add_option ("-r", "--rev", type="int", default=-1,
-                       help="Specify USRP revision, 1 for USRP1, 2 for USRP1P")
-    (options, args) = parser.parse_args ()
-    if len (args) != 2:
-        parser.print_help ()
-        sys.exit (1)
-    if options.rev < 0:
-        sys.stderr.write (
-            "You must specify the USRP revision number (2 or 4) with -r REV\n")
-        sys.exit (1)
-
-    infile = args[0]
-    outfile = args[1]
-
-    image = "".join(chr(c) for c in build_eeprom_image(infile, options.rev))
-
-    f = open(outfile, 'wb')
-    f.write(str(image))
-    f.close()  

firmware/fx2/utils/edit-gpif-b100.py

@@ -1,120 +0,0 @@
-#!/usr/bin/env python
-# -*- Python -*-
-#
-# Copyright 2003 Free Software Foundation, Inc.
-# 
-# This file is part of GNU Radio
-# 
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-# 
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-# 
-
-
-# Edit the gpif.c file generated by the Cypress GPIF Designer Tool and
-# produce usrp_gpif.c, and usrp_gpif_inline.h, files suitable for our
-# uses.
-
-import re
-import string
-import sys
-
-def check_flow_state (line, flow_state_dict):
-    mo = re.match (r'/\* Wave (\d) FlowStates \*/ (.*),', line)
-    if mo:
-        wave = int (mo.group (1))
-        data = mo.group (2)
-        split = data.split (',', 8)
-        v = map (lambda x : int (x, 16), split)
-        # print "%s, %s" % (wave, data)
-        # print "split: ", split
-        # print "v    : ", v
-        flow_state_dict[wave] = v
-
-
-def delta (xseq, yseq):
-    # set subtraction
-    z = []
-    for x in xseq:
-        if x not in yseq:
-            z.append (x)
-    return z
-    
-
-def write_define (output, name, pairs):
-    output.write ('#define %s()\t\\\n' % name)
-    output.write ('do {\t\t\t\t\t\\\n')
-    for reg, val in pairs:
-        output.write ('%14s = 0x%02x;\t\t\t\\\n' % (reg, val))
-    output.write ('} while (0)\n\n')
-    
-def write_inlines (output, dict):
-    regs = ['FLOWSTATE', 'FLOWLOGIC', 'FLOWEQ0CTL', 'FLOWEQ1CTL', 'FLOWHOLDOFF',
-            'FLOWSTB', 'FLOWSTBEDGE', 'FLOWSTBHPERIOD', 'GPIFHOLDAMOUNT']
-
-    READ_CTRL_FLOW_STATE = 0
-    WRITE_CTRL_FLOW_STATE = 1
-    READ_DATA_FLOW_STATE = 2
-    WRITE_DATA_FLOW_STATE = 3
-
-    read_data_info = zip (regs, dict[READ_DATA_FLOW_STATE])
-    write_data_info = zip (regs, dict[WRITE_DATA_FLOW_STATE])
-    read_ctrl_info = zip (regs, dict[READ_CTRL_FLOW_STATE])
-    write_ctrl_info = zip (regs, dict[WRITE_CTRL_FLOW_STATE])
-    
-    output.write ('''/*
- * Machine generated by "edit-gpif".  Do not edit by hand.
- */
-
-''')
-    write_define (output, 'setup_flowstate_common', read_data_info) #assumes that the same registers will change, this isn't really good
-    write_define (output, 'setup_flowstate_data_read', delta (read_data_info, write_data_info))
-    write_define (output, 'setup_flowstate_data_write', delta (write_data_info, read_data_info))
-    write_define (output, 'setup_flowstate_ctrl_read', delta (read_ctrl_info, write_ctrl_info))
-    write_define (output, 'setup_flowstate_ctrl_write', delta (write_ctrl_info, read_ctrl_info))
-    
-
-def edit_gpif (input_name, output_name, inline_name):
-    input = open (input_name, 'r')
-    output = open (output_name, 'w')
-    inline = open (inline_name, 'w')
-    flow_state_dict = {}
-
-    output.write ('''/*
- * Machine generated by "edit-gpif".  Do not edit by hand.
- */
-
-''')
-    
-    while 1:
-        line = input.readline ()
-        line = string.replace (line, '\r','')
-        line = re.sub (r' *$', r'', line)
-
-        check_flow_state (line, flow_state_dict)
-
-        line = re.sub (r'#include', r'// #include', line)
-        line = re.sub (r'xdata ', r'', line)
-        if re.search (r'GpifInit', line):
-            break
-        
-        output.write (line)
-
-    output.close ()
-    write_inlines (inline, flow_state_dict)
-    inline.close ()
-
-
-# gpif.c usrp_gpif.c usrp_gpif_inline.h
-edit_gpif (sys.argv[1], sys.argv[2], sys.argv[3])

firmware/fx2/utils/edit-gpif.py

@@ -1,114 +0,0 @@
-#!/usr/bin/env python
-# -*- Python -*-
-#
-# Copyright 2003 Free Software Foundation, Inc.
-# 
-# This file is part of GNU Radio
-# 
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-# 
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-# 
-
-
-# Edit the gpif.c file generated by the Cypress GPIF Designer Tool and
-# produce usrp_gpif.c, and usrp_gpif_inline.h, files suitable for our
-# uses.
-
-import re
-import string
-import sys
-
-def check_flow_state (line, flow_state_dict):
-    mo = re.match (r'/\* Wave (\d) FlowStates \*/ (.*),', line)
-    if mo:
-        wave = int (mo.group (1))
-        data = mo.group (2)
-        split = data.split (',', 8)
-        v = map (lambda x : int (x, 16), split)
-        # print "%s, %s" % (wave, data)
-        # print "split: ", split
-        # print "v    : ", v
-        flow_state_dict[wave] = v
-
-
-def delta (xseq, yseq):
-    # set subtraction
-    z = []
-    for x in xseq:
-        if x not in yseq:
-            z.append (x)
-    return z
-    
-
-def write_define (output, name, pairs):
-    output.write ('#define %s()\t\\\n' % name)
-    output.write ('do {\t\t\t\t\t\\\n')
-    for reg, val in pairs:
-        output.write ('%14s = 0x%02x;\t\t\t\\\n' % (reg, val))
-    output.write ('} while (0)\n\n')
-    
-def write_inlines (output, dict):
-    regs = ['FLOWSTATE', 'FLOWLOGIC', 'FLOWEQ0CTL', 'FLOWEQ1CTL', 'FLOWHOLDOFF',
-            'FLOWSTB', 'FLOWSTBEDGE', 'FLOWSTBHPERIOD', 'GPIFHOLDAMOUNT']
-
-    READ_FLOW_STATE = 2
-    WRITE_FLOW_STATE = 3
-
-    read_info = zip (regs, dict[READ_FLOW_STATE])
-    write_info = zip (regs, dict[WRITE_FLOW_STATE])
-    
-    output.write ('''/*
- * Machine generated by "edit-gpif".  Do not edit by hand.
- */
-
-''')
-    write_define (output, 'setup_flowstate_common', read_info)
-    write_define (output, 'setup_flowstate_read', delta (read_info, write_info))
-    write_define (output, 'setup_flowstate_write', delta (write_info, read_info))
-    
-
-def edit_gpif (input_name, output_name, inline_name):
-    input = open (input_name, 'r')
-    output = open (output_name, 'w')
-    inline = open (inline_name, 'w')
-    flow_state_dict = {}
-
-    output.write ('''/*
- * Machine generated by "edit-gpif".  Do not edit by hand.
- */
-
-''')
-    
-    while 1:
-        line = input.readline ()
-        line = string.replace (line, '\r','')
-        line = re.sub (r' *$', r'', line)
-
-        check_flow_state (line, flow_state_dict)
-
-        line = re.sub (r'#include', r'// #include', line)
-        line = re.sub (r'xdata ', r'', line)
-        if re.search (r'GpifInit', line):
-            break
-        
-        output.write (line)
-
-    output.close ()
-    write_inlines (inline, flow_state_dict)
-    inline.close ()
-
-
-# gpif.c usrp_gpif.c usrp_gpif_inline.h
-edit_gpif (sys.argv[1], sys.argv[2], sys.argv[3])

firmware/fx2/utils/generate_regs.py

@@ -1,57 +0,0 @@
-#!/usr/bin/env python
-
-import os, os.path
-import re
-import sys
-
-
-# set srcdir to the directory that contains Makefile.am
-try:
-    srcdir = os.environ['srcdir']
-except KeyError, e:
-    srcdir = "."
-srcdir = srcdir + '/'
-
-def open_src (name, mode):
-    global srcdir
-    return open (os.path.join (srcdir, name), mode)
-
-
-def generate_fpga_regs (h_filename, v_filename):
-    const_width = 7                  # bit width of constants
-    
-    h_file = open_src (h_filename, 'r')
-    v_file = open (v_filename, 'w')
-    v_file.write (
-    '''//
-// This file is machine generated from %s
-// Do not edit by hand; your edits will be overwritten.
-//
-''' % (h_filename,))
-
-    pat = re.compile (r'^#define\s*(FR_\w*)\s*(\w*)(.*)$')
-    pat_bitno = re.compile (r'^#define\s*(bitno\w*)\s*(\w*)(.*)$')
-    pat_bm = re.compile (r'^#define\s*(bm\w*)\s*(\w*)(.*)$')
-    for line in h_file:
-        if re.match ('//|\s*$', line):  # comment or blank line
-            v_file.write (line)
-        mo = pat.search (line)
-        mo_bitno =pat_bitno.search (line)
-        mo_bm =pat_bm.search (line)
-        if mo:
-            v_file.write ('`define %-25s %d\'d%s%s\n' % (
-                mo.group (1), const_width, mo.group (2), mo.group (3)))
-        elif mo_bitno:
-            v_file.write ('`define %-25s %s%s\n' % (
-                mo_bitno.group (1), mo_bitno.group (2), mo_bitno.group (3)))
-        elif mo_bm:
-            v_file.write ('`define %-25s %s%s\n' % (
-                mo_bm.group (1), mo_bm.group (2), mo_bm.group (3)))
-    
-
-if __name__ == '__main__':
-    if len (sys.argv) != 3:
-        sys.stderr.write ('usage: %s file.h file.v\n' % (sys.argv[0]))
-        sys.exit (1)
-    generate_fpga_regs (sys.argv[1], sys.argv[2])
-    

firmware/zpu/lib/spi.c

@@ -1,110 +0,0 @@
-/*
- * Copyright 2007,2008 Free Software Foundation, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "spi.h"
-#include "memory_map.h"
-#include "pic.h"
-#include "nonstdio.h"
-
-//void (*volatile spi_callback)(void); //SPI callback when xfer complete.
-
-//static void spi_irq_handler(unsigned irq);
-
-void
-spi_init(void) 
-{
-  /*
-   * f_sclk = f_wb / ((div + 1) * 2)
-   */
-  spi_regs->div = 1;  // 0 = Div by 2 (25 MHz); 1 = Div-by-4 (12.5 MHz)
-}
-
-void
-spi_wait(void) 
-{
-  while (spi_regs->ctrl & SPI_CTRL_GO_BSY)
-    ;
-}
-
-uint32_t
-spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags) 
-{
-  flags &= (SPI_CTRL_TXNEG | SPI_CTRL_RXNEG);
-  int ctrl = SPI_CTRL_ASS | (SPI_CTRL_CHAR_LEN_MASK & length) | flags;
-
-  spi_wait();
-
-  // Tell it which SPI slave device to access
-  spi_regs->ss = slave & 0xffff;
-
-  // Data we will send
-  spi_regs->txrx0 = data;
-
-  // Run it -- write once and rewrite with GO set
-  spi_regs->ctrl = ctrl;
-  spi_regs->ctrl = ctrl | SPI_CTRL_GO_BSY;
-
-  if(readback) {
-    spi_wait();
-    return spi_regs->txrx0;
-  }
-  else
-    return 0;
-}
-
-/*
-void spi_register_callback(void (*volatile callback)(void)) {
-  spi_callback = callback;
-}
-
-static void spi_irq_handler(unsigned irq) {
-//  printf("SPI IRQ handler\n");
-//  uint32_t wat = spi_regs->ctrl; //read a register just to clear the interrupt
-  //spi_regs->ctrl &= ~SPI_CTRL_IE;
-  if(spi_callback) spi_callback(); //we could just use the PIC to register the user's callback, but this provides the ability to do other things later
-}
-
-uint32_t spi_get_data(void) {
-  return spi_regs->txrx0;
-}
-
-bool 
-spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (*volatile callback)(void)) {
-  flags &= (SPI_CTRL_TXNEG | SPI_CTRL_RXNEG);
-  int ctrl = SPI_CTRL_ASS | SPI_CTRL_IE | (SPI_CTRL_CHAR_LEN_MASK & length) | flags;
-
-  if(spi_regs->ctrl & SPI_CTRL_GO_BSY) {
-    printf("Async SPI busy!\n");
-    return false; //we don't wait on busy, we just return failure. we count on the host to not set up another transaction before the last one finishes.
-  }
-
-  // Tell it which SPI slave device to access
-  spi_regs->ss = slave & 0xffff;
-
-  // Data we will send
-  spi_regs->txrx0 = data;
-
-  spi_register_callback(callback);
-  pic_register_handler(IRQ_SPI, spi_irq_handler);
-
-  // Run it -- write once and rewrite with GO set
-  spi_regs->ctrl = ctrl;
-  spi_regs->ctrl = ctrl | SPI_CTRL_GO_BSY;
-
-  return true;
-}
-*/

firmware/zpu/lib/spi.h

@@ -1,77 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2006,2007 Free Software Foundation, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef INCLUDED_SPI_H
-#define INCLUDED_SPI_H
-
-#include <memory_map.h>
-#include <stdbool.h>
-
-/*!
- * \brief One time call to initialize SPI
- */
-void spi_init(void);
-
-/*! 
- * \brief Wait for last SPI transaction to complete.
- * Unless you need to know it completed, it's not necessary to call this.
- */
-void spi_wait(void);
-
-#define SPI_TXONLY false	// readback: no
-#define SPI_TXRX   true		// readback: yes
-
-/*
- * Flags for spi_transact
- */
-#define SPIF_PUSH_RISE   0		// push tx data on rising edge of SCLK
-#define SPIF_PUSH_FALL   SPI_CTRL_TXNEG	// push tx data on falling edge of SCLK
-#define SPIF_LATCH_RISE  0		// latch rx data on rising edge of SCLK
-#define SPIF_LATCH_FALL  SPI_CTRL_RXNEG	// latch rx data on falling edge of SCLK
-
-
-uint32_t
-spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags);
-
-//uint32_t spi_get_data(void);
-//static void spi_irq_handler(unsigned irq);
-//void spi_register_callback(void (*volatile callback)(void));
-
-//bool 
-//spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (*volatile callback)(void));
-
-// ----------------------------------------------------------------
-// Routines that manipulate the FLASH SPI BUS
-// ----------------------------------------------------------------
-
-/*!
- * \brief One time call to initialize SPI
- */
-void spif_init(void);
-
-/*! 
- * \brief Wait for last SPI transaction to complete.
- * Unless you need to know it completed, it's not necessary to call this.
- */
-void spif_wait(void);
-
-uint32_t
-spif_transact(bool readback_, int slave, uint32_t data, int length, uint32_t flags);
-
-
-#endif /* INCLUDED_SPI_H */

firmware/zpu/usrp2/CMakeLists.txt

@@ -1,37 +0,0 @@
-#
-# Copyright 2010-2011 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-########################################################################
-INCLUDE(${CMAKE_SOURCE_DIR}/lib/CMakeLists.txt)
-INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR})
-
-ADD_DEFINITIONS(-DUSRP2)
-ADD_DEFINITIONS(-DUDP_UART_MASK=0)
-
-ADD_LIBRARY(libusrp2fw STATIC
-    ${COMMON_SRCS}
-    sd.c
-    ethernet.c
-)
-
-########################################################################
-SET(GEN_OUTPUTS_BIN_SIZE 0x3fff)
-
-ADD_EXECUTABLE(usrp2_txrx_uhd.elf ${CMAKE_SOURCE_DIR}/apps/txrx_uhd.c)
-TARGET_LINK_LIBRARIES(usrp2_txrx_uhd.elf libusrp2fw)
-GEN_OUTPUTS(usrp2_txrx_uhd.elf)
-

firmware/zpu/usrp2/eth_phy.h

@@ -1,219 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2007 Free Software Foundation, Inc.
- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/* Much of this was extracted from the Linux e1000_hw.h file */
-
-#ifndef INCLUDED_ETH_PHY_H
-#define INCLUDED_ETH_PHY_H
-
-/* PHY 1000 MII Register/Bit Definitions */
-/* PHY Registers defined by IEEE */
-
-#define PHY_CTRL         0x00 /* Control Register */
-#define PHY_STATUS       0x01 /* Status Regiser */
-#define PHY_ID1          0x02 /* Phy Id Reg (word 1) */
-#define PHY_ID2          0x03 /* Phy Id Reg (word 2) */
-#define PHY_AUTONEG_ADV  0x04 /* Autoneg Advertisement */
-#define PHY_LP_ABILITY   0x05 /* Link Partner Ability (Base Page) */
-#define PHY_AUTONEG_EXP  0x06 /* Autoneg Expansion Reg */
-#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
-#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
-#define PHY_1000T_CTRL   0x09 /* 1000Base-T Control Reg */
-#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
-#define PHY_EXT_STATUS   0x0F /* Extended Status Reg */
-
-/* PHY 1000 MII Register additions in DP83856 */
-/* The part implements 0x00 thru 0x1f; we use these. */
-
-#define	PHY_LINK_AN	 0x11 /* Link and Auto Negotiation Status Reg */
-#define PHY_INT_STATUS	 0x14 /* Interupt Status Reg (RO) */
-#define PHY_INT_MASK	 0x15 /* Interrupt Mask Reg  (RW) */
-#define PHY_INT_CLEAR    0x17 /* Interrupt Clear Reg (RW) */
-
-
-/* Bit definitions for some of the registers above */
-
-/* PHY Control Register (PHY_CTRL) */
-#define MII_CR_SPEED_SELECT_MSB 0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_COLL_TEST_ENABLE 0x0080  /* Collision test enable */
-#define MII_CR_FULL_DUPLEX      0x0100  /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG 0x0200  /* Restart auto negotiation */
-#define MII_CR_ISOLATE          0x0400  /* Isolate PHY from MII */
-#define MII_CR_POWER_DOWN       0x0800  /* Power down */
-#define MII_CR_AUTO_NEG_EN      0x1000  /* Auto Neg Enable */
-#define MII_CR_SPEED_SELECT_LSB 0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_LOOPBACK         0x4000  /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET            0x8000  /* 0 = normal, 1 = PHY reset */
-
-/* PHY Status Register (PHY_STATUS) */
-#define MII_SR_EXTENDED_CAPS     0x0001 /* Extended register capabilities */
-#define MII_SR_JABBER_DETECT     0x0002 /* Jabber Detected */
-#define MII_SR_LINK_STATUS       0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_CAPS      0x0008 /* Auto Neg Capable */
-#define MII_SR_REMOTE_FAULT      0x0010 /* Remote Fault Detect */
-#define MII_SR_AUTONEG_COMPLETE  0x0020 /* Auto Neg Complete */
-#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
-#define MII_SR_EXTENDED_STATUS   0x0100 /* Ext. status info in Reg 0x0F */
-#define MII_SR_100T2_HD_CAPS     0x0200 /* 100T2 Half Duplex Capable */
-#define MII_SR_100T2_FD_CAPS     0x0400 /* 100T2 Full Duplex Capable */
-#define MII_SR_10T_HD_CAPS       0x0800 /* 10T   Half Duplex Capable */
-#define MII_SR_10T_FD_CAPS       0x1000 /* 10T   Full Duplex Capable */
-#define MII_SR_100X_HD_CAPS      0x2000 /* 100X  Half Duplex Capable */
-#define MII_SR_100X_FD_CAPS      0x4000 /* 100X  Full Duplex Capable */
-#define MII_SR_100T4_CAPS        0x8000 /* 100T4 Capable */
-
-/* Autoneg Advertisement Register (PHY_AUTONEG_ADV) */
-#define NWAY_AR_SELECTOR_FIELD 0x0001   /* indicates IEEE 802.3 CSMA/CD */
-#define NWAY_AR_10T_HD_CAPS    0x0020   /* 10T   Half Duplex Capable */
-#define NWAY_AR_10T_FD_CAPS    0x0040   /* 10T   Full Duplex Capable */
-#define NWAY_AR_100TX_HD_CAPS  0x0080   /* 100TX Half Duplex Capable */
-#define NWAY_AR_100TX_FD_CAPS  0x0100   /* 100TX Full Duplex Capable */
-#define NWAY_AR_100T4_CAPS     0x0200   /* 100T4 Capable */
-#define NWAY_AR_PAUSE          0x0400   /* Pause operation desired */
-#define NWAY_AR_ASM_DIR        0x0800   /* Asymmetric Pause Direction bit */
-#define NWAY_AR_REMOTE_FAULT   0x2000   /* Remote Fault detected */
-#define NWAY_AR_NEXT_PAGE      0x8000   /* Next Page ability supported */
-
-/* Link Partner Ability Register (Base Page) (PHY_LP_ABILITY) */
-#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
-#define NWAY_LPAR_10T_HD_CAPS    0x0020 /* LP is 10T   Half Duplex Capable */
-#define NWAY_LPAR_10T_FD_CAPS    0x0040 /* LP is 10T   Full Duplex Capable */
-#define NWAY_LPAR_100TX_HD_CAPS  0x0080 /* LP is 100TX Half Duplex Capable */
-#define NWAY_LPAR_100TX_FD_CAPS  0x0100 /* LP is 100TX Full Duplex Capable */
-#define NWAY_LPAR_100T4_CAPS     0x0200 /* LP is 100T4 Capable */
-#define NWAY_LPAR_PAUSE          0x0400 /* LP Pause operation desired */
-#define NWAY_LPAR_ASM_DIR        0x0800 /* LP Asymmetric Pause Direction bit */
-#define NWAY_LPAR_REMOTE_FAULT   0x2000 /* LP has detected Remote Fault */
-#define NWAY_LPAR_ACKNOWLEDGE    0x4000 /* LP has rx'd link code word */
-#define NWAY_LPAR_NEXT_PAGE      0x8000 /* Next Page ability supported */
-
-/* Autoneg Expansion Register (PHY_AUTONEG_EXP) */
-#define NWAY_ER_LP_NWAY_CAPS      0x0001 /* LP has Auto Neg Capability */
-#define NWAY_ER_PAGE_RXD          0x0002 /* LP is 10T   Half Duplex Capable */
-#define NWAY_ER_NEXT_PAGE_CAPS    0x0004 /* LP is 10T   Full Duplex Capable */
-#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
-#define NWAY_ER_PAR_DETECT_FAULT  0x0010 /* LP is 100TX Full Duplex Capable */
-
-/* Next Page TX Register (PHY_NEXT_PAGE_TX) */
-#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
-#define NPTX_TOGGLE         0x0800 /* Toggles between exchanges
-                                    * of different NP
-                                    */
-#define NPTX_ACKNOWLDGE2    0x1000 /* 1 = will comply with msg
-                                    * 0 = cannot comply with msg
-                                    */
-#define NPTX_MSG_PAGE       0x2000 /* formatted(1)/unformatted(0) pg */
-#define NPTX_NEXT_PAGE      0x8000 /* 1 = addition NP will follow
-                                    * 0 = sending last NP
-                                    */
-
-/* Link Partner Next Page Register (PHY_LP_NEXT_PAGE) */
-#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
-#define LP_RNPR_TOGGLE         0x0800 /* Toggles between exchanges
-                                       * of different NP
-                                       */
-#define LP_RNPR_ACKNOWLDGE2    0x1000 /* 1 = will comply with msg
-                                       * 0 = cannot comply with msg
-                                       */
-#define LP_RNPR_MSG_PAGE       0x2000  /* formatted(1)/unformatted(0) pg */
-#define LP_RNPR_ACKNOWLDGE     0x4000  /* 1 = ACK / 0 = NO ACK */
-#define LP_RNPR_NEXT_PAGE      0x8000  /* 1 = addition NP will follow
-                                        * 0 = sending last NP
-                                        */
-
-/* 1000BASE-T Control Register (PHY_1000T_CTRL) */
-#define CR_1000T_ASYM_PAUSE      0x0080 /* Advertise asymmetric pause bit */
-#define CR_1000T_HD_CAPS         0x0100 /* Advertise 1000T HD capability */
-#define CR_1000T_FD_CAPS         0x0200 /* Advertise 1000T FD capability  */
-#define CR_1000T_REPEATER_DTE    0x0400 /* 1=Repeater/switch device port */
-                                        /* 0=DTE device */
-#define CR_1000T_MS_VALUE        0x0800 /* 1=Configure PHY as Master */
-                                        /* 0=Configure PHY as Slave */
-#define CR_1000T_MS_ENABLE       0x1000 /* 1=Master/Slave manual config value */
-                                        /* 0=Automatic Master/Slave config */
-#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
-#define CR_1000T_TEST_MODE_1     0x2000 /* Transmit Waveform test */
-#define CR_1000T_TEST_MODE_2     0x4000 /* Master Transmit Jitter test */
-#define CR_1000T_TEST_MODE_3     0x6000 /* Slave Transmit Jitter test */
-#define CR_1000T_TEST_MODE_4     0x8000 /* Transmitter Distortion test */
-
-/* 1000BASE-T Status Register (PHY_1000T_STATUS) */
-#define SR_1000T_IDLE_ERROR_CNT   0x00FF /* Num idle errors since last read */
-#define SR_1000T_ASYM_PAUSE_DIR   0x0100 /* LP asymmetric pause direction bit */
-#define SR_1000T_LP_HD_CAPS       0x0400 /* LP is 1000T HD capable */
-#define SR_1000T_LP_FD_CAPS       0x0800 /* LP is 1000T FD capable */
-#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
-#define SR_1000T_LOCAL_RX_STATUS  0x2000 /* Local receiver OK */
-#define SR_1000T_MS_CONFIG_RES    0x4000 /* 1=Local TX is Master, 0=Slave */
-#define SR_1000T_MS_CONFIG_FAULT  0x8000 /* Master/Slave config fault */
-#define SR_1000T_REMOTE_RX_STATUS_SHIFT          12
-#define SR_1000T_LOCAL_RX_STATUS_SHIFT           13
-#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT    5
-#define FFE_IDLE_ERR_COUNT_TIMEOUT_20            20
-#define FFE_IDLE_ERR_COUNT_TIMEOUT_100           100
-
-/* Extended Status Register (PHY_EXT_STATUS) */
-#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
-#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
-#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
-#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
-
-#define PHY_TX_POLARITY_MASK   0x0100 /* register 10h bit 8 (polarity bit) */
-#define PHY_TX_NORMAL_POLARITY 0      /* register 10h bit 8 (normal polarity) */
-
-#define AUTO_POLARITY_DISABLE  0x0010 /* register 11h bit 4 */
-                                      /* (0=enable, 1=disable) */
-
-/* Link and Auto Negotiation Status Reg (PHY_LINK_AN) [READ-ONLY] */
-#define	LANSR_MASTER           0x0001 /* 1=PHY is currently in master mode */
-#define	LANSR_FULL_DUPLEX      0x0002 /* 1=PHY is currently full duplex */
-#define LANSR_LINK_GOOD        0x0004 /* 1=a good link is established */
-#define LANSR_SPEED_MASK       0x0018
-#define	  LANSR_SPEED_10       0x0000 /*   10Mb/s */
-#define	  LANSR_SPEED_100      0x0008 /*  100Mb/s */
-#define	  LANSR_SPEED_1000     0x0010 /* 1000Mb/s */
-#define	  LANSR_SPEED_RSRVD    0x0018 /* reserved */
-#define LANSR_NON_COMP_MODE    0x0020 /* 1=detects only in non-compliant mode */
-#define	LANSR_DEEP_LOOPBACK    0x0040 /* 1=the PHY operates in deep loopback mode */
-#define	LANSR_SHALLOW_LOOPBACK 0x0080 /* 1=the PHY operates in shallow loopback mode */
-#define LANSR_RSRVD_8	       0x0100 /* reserved */
-#define LANSR_FIFO_ERR	       0x0200 /* 1=FIFO error occurred */
-#define	LANSR_MDIX_XOVER       0x0400 /* 1=PHY's MDI is in cross-over mode */
-#define	LANSR_RSRVD_11	       0x0800 /* resevered */
-#define	LANSR_TP_POLARITY_REV  0xf000 /* Twisted pair polarity status A:D([15:12]) 1=reversed */
-
-/* Interrupt status, mask and clear regs (PHY_INT_{STATUS,MASK,CLEAR}) */
-#define	PHY_INT_RSRVD_0	       0x0001 /* reserved */
-#define	PHY_INT_RSRVD_1	       0x0002 /* reserved */
-#define	PHY_INT_RSRVD_2	       0x0004 /* reserved */
-#define	PHY_INT_REM_FLT_CNG    0x0008 /* Remote Fault Changed */
-#define	PHY_INT_AN_CMPL	       0x0010 /* Auto-negotiation completion */
-#define	PHY_INT_NXT_PG_RCVD    0x0020 /* Next Page Received */
-#define PHY_INT_JABBER_CNG     0x0040 /* Jabber Changed */
-#define PHY_INT_NO_LINK	       0x0080 /* No link after auto-negotiation */
-#define PHY_INT_NO_HCD	       0x0100 /* AN couldn't determine highest common denominator */
-#define PHY_INT_MAS_SLA_ERR    0x0200 /* Master / Slave Error: couldn't resolve */
-#define PHY_INT_PRL_DET_FLT    0x0400 /* Parallel detection fault */
-#define PHY_INT_POL_CNG	       0x0800 /* Polarity of any channel changed */
-#define	PHY_INT_MDIX_CNG       0x1000 /* MDIX changed.  A pair swap occurred. */
-#define PHY_INT_DPLX_CNG       0x2000 /* Duplex changed */
-#define PHY_INT_LNK_CNG	       0x4000 /* Link changed (asserted when a link is established or broken) */
-#define PHY_INT_SPD_CNG	       0x8000 /* Speed changed */
-
-#endif /* INCLUDED_ETH_PHY_H */

firmware/zpu/usrp2/ethernet.c

@@ -1,290 +0,0 @@
-/*
- * Copyright 2011 Ettus Research LLC
- * Copyright 2007 Free Software Foundation, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "ethernet.h"
-#include "eth_phy.h"
-#include "eth_mac.h"
-#include "pic.h"
-#include "hal_io.h"
-#include "nonstdio.h"
-
-#define VERBOSE 1
-
-static ethernet_t ed_state;
-static ethernet_link_changed_callback_t ed_callback = 0;
-
-void 
-ethernet_register_link_changed_callback(ethernet_link_changed_callback_t new_callback)
-{
-  ed_callback = new_callback;
-}
-
-
-static void
-ed_set_mac_speed(int speed)
-{
-  printf("Speed set to %d\n",speed);
-  /*
-  switch(speed){
-  case 10:
-    eth_mac->speed = 1;
-    break;
-  case 100:
-    eth_mac->speed = 2;
-    break;
-  case 1000:
-    eth_mac->speed = 4;
-    break;
-  default:
-    break;
-  }
-  */
-}
-
-static void
-ed_link_up(int speed)
-{
-  // putstr("ed_link_up: "); puthex16_nl(speed);
-
-  ed_set_mac_speed(speed);
-
-  if (ed_callback)		// fire link changed callback
-    (*ed_callback)(speed);
-}
-
-static void
-ed_link_down(void)
-{
-  // putstr("ed_link_down\n");
-
-  if (ed_callback)		// fire link changed callback
-    (*ed_callback)(0);
-}
-
-
-static void
-ed_link_speed_change(int speed)
-{
-  ed_link_down();
-  ed_link_up(speed);
-}
-
-static void
-print_flow_control(int flow_control)
-{
-  static const char *flow_control_msg[4] = {
-    "NONE", "WE_TX", "WE_RX", "SYMMETRIC"
-  };
-  putstr("ethernet flow control: ");
-  puts(flow_control_msg[flow_control & 0x3]);
-}
-
-static void
-check_flow_control_resolution(void)
-{
-  static const unsigned char table[16] = {
-    // index = {local_asm, local_pause, partner_asm, partner_pause}
-    FC_NONE,  FC_NONE,  FC_NONE,  FC_NONE,
-    FC_NONE,  FC_SYMM,  FC_NONE,  FC_SYMM,
-    FC_NONE,  FC_NONE,  FC_NONE,  FC_WE_TX,
-    FC_NONE,  FC_SYMM,  FC_WE_RX, FC_SYMM
-  };
-
-  int us = eth_mac_miim_read(PHY_AUTONEG_ADV);
-  int lp = eth_mac_miim_read(PHY_LP_ABILITY);
-  int index = (((us >> 10) & 0x3) << 2) | ((lp >> 10) & 0x3);
-  ed_state.flow_control = table[index];
-
-  if (1)
-    print_flow_control(ed_state.flow_control);
-}
-
-/*
- * Read the PHY state register to determine link state and speed
- */
-static void
-ed_check_phy_state(void)
-{
-  int lansr = eth_mac_miim_read(PHY_LINK_AN);
-  eth_link_state_t new_state = LS_UNKNOWN;
-  int new_speed = S_UNKNOWN;
-
-  if (VERBOSE){
-    putstr("LANSR: ");
-    puthex16_nl(lansr);
-  }
-
-  if (lansr & LANSR_LINK_GOOD){		// link's up
-    if (VERBOSE)
-      puts("  LINK_GOOD");
-
-    new_state = LS_UP;
-    switch (lansr & LANSR_SPEED_MASK){
-    case LANSR_SPEED_10:
-      new_speed = 10;
-      break;
-      
-    case LANSR_SPEED_100:
-      new_speed = 100;
-      break;
-      
-    case LANSR_SPEED_1000:
-      new_speed = 1000;
-      break;
-
-    default:
-      new_speed = S_UNKNOWN;
-      break;
-    }
-
-    check_flow_control_resolution();
-  }
-  else {				// link's down
-    if (VERBOSE)
-      puts("  NOT LINK_GOOD");
-    
-    new_state = LS_DOWN;
-    new_speed = S_UNKNOWN;
-  }
-
-  if (new_state != ed_state.link_state){
-    ed_state.link_state = new_state;		// remember new state
-    if (new_state == LS_UP)
-      ed_link_up(new_speed);
-    else if (new_state == LS_DOWN)
-      ed_link_down();
-  }
-  else if (new_state == LS_UP && new_speed != ed_state.link_speed){
-    ed_state.link_speed = new_speed;		// remember new speed
-    ed_link_speed_change(new_speed);
-  }
-}
-
-/*
- * This is fired when the ethernet PHY state changes
- */
-static void
-eth_phy_irq_handler(unsigned irq)
-{
-  ed_check_phy_state();
-  eth_mac_miim_write(PHY_INT_CLEAR, ~0);	// clear all ints
-}
-
-void
-ethernet_init(void)
-{
-  eth_mac_init(ethernet_mac_addr());
-
-  ed_state.link_state = LS_UNKNOWN;
-  ed_state.link_speed = S_UNKNOWN;
-
-  // initialize MAC registers
-  //  eth_mac->tx_hwmark = 0x1e;
-  //eth_mac->tx_lwmark = 0x19;
-
-  //eth_mac->crc_chk_en = 1;
-  //eth_mac->rx_max_length = 2048;
-
-  // configure PAUSE frame stuff
-  //eth_mac->tx_pause_en = 1;		// pay attn to pause frames sent to us
-
-  //eth_mac->pause_quanta_set = 38;	// a bit more than 1 max frame 16kb/512 + fudge
-  //eth_mac->pause_frame_send_en = 1;	// enable sending pause frames
-
-
-  // setup PHY to interrupt on changes
-
-  unsigned mask =
-    (PHY_INT_AN_CMPL		// auto-neg completed
-     | PHY_INT_NO_LINK		// no link after auto-neg
-     | PHY_INT_NO_HCD		// no highest common denominator
-     | PHY_INT_MAS_SLA_ERR	// couldn't resolve master/slave 
-     | PHY_INT_PRL_DET_FLT	// parallel detection fault
-     | PHY_INT_LNK_CNG		// link established or broken
-     | PHY_INT_SPD_CNG		// speed changed
-     );
-
-  eth_mac_miim_write(PHY_INT_CLEAR, ~0);	// clear all pending interrupts
-  eth_mac_miim_write(PHY_INT_MASK, mask);	// enable the ones we want
-
-  pic_register_handler(IRQ_PHY, eth_phy_irq_handler);
-
-  // Advertise our flow control configuation.
-  //
-  // We and the link partner each specify two bits in the base page
-  // related to autoconfiguration: NWAY_AR_PAUSE and NWAY_AR_ASM_DIR.
-  // The bits say what a device is "willing" to do, not what may actually
-  // happen as a result of the negotiation.  There are 4 cases:
-  //
-  // PAUSE  ASM_DIR
-  //
-  //  0        0        I have no flow control capability.
-  //
-  //  1        0        I both assert and respond to flow control.
-  //
-  //  0        1        I assert flow control, but cannot respond.  That is,
-  //                    I want to be able to send PAUSE frames, but will ignore any
-  //		 	you send to me.  (This is our configuration.)
-  //
-  //  1        1        I can both assert and respond to flow control AND I am willing
-  //                    to operate symmetrically OR asymmetrically in EITHER direction.
-  //                    (We hope the link partner advertises this, otherwise we don't
-  //			get what we want.)
-
-  int t = eth_mac_miim_read(PHY_AUTONEG_ADV);
-  t &= ~(NWAY_AR_PAUSE | NWAY_AR_ASM_DIR);
-  t |= NWAY_AR_ASM_DIR;
-
-  // Say we can't to 10BASE-T or 100BASE-TX, half or full duplex
-  t &= ~(NWAY_AR_10T_HD_CAPS | NWAY_AR_10T_FD_CAPS | NWAY_AR_100TX_HD_CAPS | NWAY_AR_100TX_FD_CAPS);
-
-  eth_mac_miim_write(PHY_AUTONEG_ADV, t);
-  int r = eth_mac_miim_read(PHY_AUTONEG_ADV);  		// DEBUG, read back
-  if (t != r){
-    printf("PHY_AUTONEG_ADV: wrote 0x%x, got 0x%x\n", t, r);
-  }
-
-  // Restart autonegotation.  
-  // We want to ensure that we're advertising our PAUSE capabilities.
-  t = eth_mac_miim_read(PHY_CTRL);
-  eth_mac_miim_write(PHY_CTRL, t | MII_CR_RESTART_AUTO_NEG);
-}
-
-int
-ethernet_check_errors(void)
-{
-  // these registers are reset when read
-  
-  int	r = 0;
-  /*
-  if (eth_mac_read_rmon(0x05) != 0)
-    r |= RME_RX_CRC;
-  if (eth_mac_read_rmon(0x06) != 0)
-    r |= RME_RX_FIFO_FULL;
-  if (eth_mac_read_rmon(0x07) != 0)
-    r |= RME_RX_2SHORT_2LONG;
-  
-  if (eth_mac_read_rmon(0x25) != 0)
-    r |= RME_TX_JAM_DROP;
-  if (eth_mac_read_rmon(0x26) != 0)
-    r |= RME_TX_FIFO_UNDER;
-  if (eth_mac_read_rmon(0x27) != 0)
-    r |= RME_TX_FIFO_OVER;
-  */
-  return r;
-}

firmware/zpu/usrp2/sd.c

@@ -1,197 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2008-2011 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "sd.h"
-#include "memory_map.h"
-#include "stdint.h"
-#include "stdio.h"
-
-static inline void
-sd_packarg(unsigned char *argument,unsigned int value)
-{
-  argument[3] = (unsigned char)(value >> 24);
-  argument[2] = (unsigned char)(value >> 16);
-  argument[1] = (unsigned char)(value >> 8);
-  argument[0] = (unsigned char)(value);
-}
-
-int
-sd_init(void)
-{
-  unsigned char response[5];
-  unsigned char argument[4];
-  int i,j;
-
-  for(i=0;i<4;i++)
-    argument[i] = 0;
-
-  // Set clock to less than 400 kHz to start out
-  sdspi_regs->clkdiv = 128;
-
-  // Delay at least 74 cycles
-  sd_assert_cs();
-  for(i = 0; i < 100; i++)
-    sd_send_byte(SD_IDLE);
-  sd_deassert_cs();
-  
-  // Initialization Sequence -- CMD0 CMD55 ACMD41 CMD58
-  // Put card in idle state
-  if(sd_send_command(SD_CMD0,SD_CMD0_R,response,argument)==0)
-    return 0;  // Something went wrong in command
-
-  j = 0;
-  do {
-    j++;
-    if(sd_send_command(SD_CMD55,SD_CMD55_R,response,argument)==1)
-      sd_send_command(SD_ACMD41,SD_ACMD41_R,response,argument);
-    else
-      j = SD_IDLE_WAIT_MAX;
-  }
-  while(((response[0] & SD_MSK_IDLE) == SD_MSK_IDLE) && (j < SD_IDLE_WAIT_MAX));
-
-  if(j>= SD_IDLE_WAIT_MAX)  // IDLE timeout exceeded, card asleep
-    return 0;
-  
-  // CMD58 reads the SD card capabilities
-  if(sd_send_command(SD_CMD58,SD_CMD58_R,response,argument)==0)
-    return 0;  // CMD58 FAIL
-
-  if((response[2] & SD_MSK_OCR_33) != SD_MSK_OCR_33)
-    return 0;  // Card doesn't do 3.3V
-
-  //printf("OCR = %x %x %x %x\n",response[0],response[1],response[2],response[3]);
-
-  // Set blocklen here
-  sd_packarg(argument,SD_BLOCKLEN);
-  if(sd_send_command(SD_CMD16,SD_CMD16_R,response,argument)==0)
-    return 0;    // Set Blocklen failed
-  
-  // Reset back to high speed
-  sdspi_regs->clkdiv = 4;
-  //puts("finished init\n");
-  return 1;
-}
-
-int sd_send_command(unsigned char cmd,unsigned char response_type,
-		    unsigned char *response,unsigned char *argument)
-{
-  int i;
-  char response_length;
-  unsigned char tmp;
-
-  sd_assert_cs();
-  sd_send_byte((cmd & 0x3F) | 0x40);
-  for(i=3;i>=0;i--)
-    sd_send_byte(argument[i]);
-  sd_send_byte(SD_CRC);   // Always the same
-
-  response_length = 0;
-  switch(response_type)
-    {
-    case SD_R1:
-    case SD_R1B:
-      response_length = 1;
-      break;
-    case SD_R2:
-      response_length = 2;
-      break;
-    case SD_R3:
-      response_length = 5;
-      break;
-    default:
-      break;
-    }
-
-  // Wait for a response, which will have a 0 start bit
-  i = 0;
-  do
-    {
-      tmp = sd_rcv_byte();
-      i++;
-    }
-  while(((tmp & 0x80) != 0) && i < SD_CMD_TIMEOUT);
-
-  if(i>= SD_CMD_TIMEOUT)
-    {
-      sd_deassert_cs();
-      //puts("cmd send timeout\n");
-      return 0;
-    }
-
-  for(i=response_length-1; i>=0; i--)
-    {
-      response[i] = tmp;
-      tmp = sd_rcv_byte();
-    }
-  i = 0;
-  if(response_type == SD_R1B)
-    {
-      do
-	{
-	  i++;
-	  tmp = sd_rcv_byte();
-	}
-      while(tmp != SD_IDLE);
-      sd_send_byte(SD_IDLE);
-    }
-  
-  //puts("send cmd success\n");
-  sd_deassert_cs();
-  return 1;
-}
-
-int
-sd_read_block (unsigned int blockaddr, unsigned char *buf)
-{
-  unsigned char response[5];
-  unsigned char argument[4];
-  unsigned int i = 0;
-  unsigned char tmp;
-
-  blockaddr <<= SD_BLOCKLEN_NBITS;
-  sd_packarg(argument,blockaddr);
-  if(sd_send_command(SD_CMD17,SD_CMD17_R,response,argument)==0)
-    return 0;    //Failed READ;
-  if(response[0] != 0)
-    return 0;    //Misaligned READ
-
-  sd_assert_cs();
-  i = 0;
-  do
-    {
-      tmp = sd_rcv_byte();
-      i++;
-    }
-  while((tmp == 0xFF) && (i < SD_RD_TIMEOUT));
-  if((i>= SD_RD_TIMEOUT) ||((tmp & SD_MSK_TOK_DATAERROR) == 0))
-    {
-      sd_send_byte(SD_IDLE);  // Send a dummy before quitting
-      return 0;   // Data ERROR
-    }
-  for(i=0;i<SD_BLOCKLEN;i++)
-    buf[i] = sd_rcv_byte();
-  return 1;
-
-}
-
-int
-sd_write_block(unsigned int blockaddr, const unsigned char *buf)
-{
-  // FIXME not implemented yet
-  return 0;
-}

firmware/zpu/usrp2/sd.h

@@ -1,122 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2008-2011 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef INCLUDED_SD_H
-#define INCLUDED_SD_H
-
-#include "memory_map.h"
-
-#define SD_READY 1
-#define SD_IDLE_WAIT_MAX 100
-#define SD_CMD_TIMEOUT 100
-#define SD_RD_TIMEOUT 1000
-
-#define SD_CMD0 0
-#define SD_CMD1 1
-#define SD_CMD9 9
-#define SD_CMD10 10
-#define SD_CMD12 12
-#define SD_CMD13 13
-#define SD_CMD16 16
-#define SD_CMD17 17 
-#define SD_CMD18 18
-#define SD_CMD24 24
-#define SD_CMD25 25
-#define SD_CMD27 27
-#define SD_CMD28 28
-#define SD_CMD29 29
-#define SD_CMD30 30
-#define SD_CMD32 32
-#define SD_CMD33 33
-#define SD_CMD38 38
-#define SD_CMD55 55
-#define SD_CMD58 58
-#define SD_CMD59 59
-#define SD_ACMD41 41
-#define SD_IDLE 0xFF
-#define SD_CRC 0x95
-
-#define SD_R1 1
-#define SD_R1B 2
-#define SD_R2 3
-#define SD_R3 4
-
-#define SD_CMD0_R SD_R1
-#define SD_CMD16_R SD_R1
-#define SD_CMD17_R SD_R1
-#define SD_CMD55_R SD_R1
-#define SD_ACMD41_R SD_R1
-#define SD_CMD58_R SD_R3
-
-#define SD_BLOCKLEN 512
-#define SD_BLOCKLEN_NBITS 9
-
-#define SD_MSK_IDLE 0x01
-#define SD_MSK_OCR_33 0xC0
-#define SD_MSK_TOK_DATAERROR 0xE0
-
-
-int sd_init(void);
-
-static inline void
-sd_assert_cs(void)
-{
-  // Wait for idle before doing anything
-  while(sdspi_regs->status != SD_READY)
-    ;
-  sdspi_regs->status = 1;
-}
-
-static inline void
-sd_deassert_cs(void)
-{
-  // Wait for idle before doing anything
-  while(sdspi_regs->status != SD_READY)
-    ;
-  sdspi_regs->status = 0;
-}
-
-static inline char
-sd_rcv_byte(void)
-{
-  // Wait for idle before doing anything
-  while(sdspi_regs->status != SD_READY)
-    ;
-  sdspi_regs->send_dat = SD_IDLE;
-  while(sdspi_regs->status != SD_READY)
-    ;
-  return sdspi_regs-> receive_dat;
-}
-
-static inline void
-sd_send_byte(char dat)
-{
-  // Wait for idle before doing anything
-  while(sdspi_regs->status != SD_READY)
-    ;      // Wait for status = 1 (ready)
-  sdspi_regs->send_dat = dat;
-}
-
-
-int sd_send_command(unsigned char cmd,unsigned char response_type,
-		    unsigned char *response,unsigned char *argument);
-
-int sd_read_block (unsigned int blockaddr, unsigned char *buf);
-int sd_write_block(unsigned int blockaddr, const unsigned char *buf);
-
-#endif /* INCLUDED_SD_H */

fix-copyright-years

@@ -1,71 +0,0 @@
-#!/usr/bin/env python
-
-import re
-import optparse
-import datetime
-import subprocess
-import multiprocessing
-
-co_line_matcher = re.compile('^.*Copyright (.*) Ettus Research LLC$')
-
-def command(*args): return subprocess.Popen(args, stdout=subprocess.PIPE).communicate()[0]
-
-def get_co_line(lines):
-    for i, line in enumerate(lines[:5]):
-        if co_line_matcher.match(line): return line, i
-    return None, None
-
-def fix_co_years(files, keep_years):
-    for file in files:
-        print file
-        lines = open(file).readlines()
-        line, num = get_co_line(lines)
-        if line is None: continue
-
-        #extract the years from the git history
-        log_years = map(
-            lambda l: int(l.split()[-2]),
-            filter(
-                lambda l: l.startswith('Date'),
-                command('git', 'log', file).splitlines(),
-            ),
-        )
-        log_years = min(log_years), max(log_years)
-
-        #extract years from co string
-        try:
-            co_years_str = co_line_matcher.match(line).groups()[0]
-            co_years = map(int, co_years_str.split('-'))
-            co_years = min(co_years), max(co_years)
-        except Exception, e:
-            print '    format error on line %d: "%s"'%(num, line), e
-            continue
-
-        #keep years means log years is a superset
-        if keep_years: log_years = min(co_years+log_years), max(co_years+log_years)
-
-        if log_years != co_years:
-            print '    log years: %s != copyright years: %s'%(log_years, co_years)
-            year_now = datetime.datetime.now().year
-            all_years = min(log_years), max(list(log_years)+[year_now]) #add the current year
-            all_years_str = '%s-%s'%all_years
-            if all_years[0] == all_years[1]: all_years_str = str(all_years[0])
-            new_text = ''.join(lines[:num] + [line.replace(co_years_str, all_years_str)] + lines[num+1:])
-            open(file, 'w').write(new_text)
-
-if __name__ == "__main__":
-    parser = optparse.OptionParser(usage="usage: %prog [options] path")
-    parser.add_option("-k", "--keep", action="store_true", help="keep copyright years", default=False)
-    (options, args) = parser.parse_args()
-
-    #get recursive list of files in the repo
-    files = command('git', 'ls-tree', '--name-only', 'HEAD', '-r', args[0]).splitlines()
-
-    #start n+1 processes to handle the files
-    num_procs = multiprocessing.cpu_count()
-    procs = [multiprocessing.Process(
-        target=lambda *files: fix_co_years(files, keep_years=options.keep),
-        args=files[num::num_procs],
-    ) for num in range(num_procs)]
-    map(multiprocessing.Process.start, procs)
-    map(multiprocessing.Process.join, procs)