Changes as per release 22.04 of srsRAN
This commit is contained in:
herlesupreeth
@@ -17,6 +17,8 @@ services:
|
||||
- /etc/localtime:/etc/localtime:ro
|
||||
env_file:
|
||||
- .env
|
||||
environment:
|
||||
- COMPONENT_NAME=enb
|
||||
expose:
|
||||
- "36412/sctp"
|
||||
- "2152/udp"
|
||||
|
||||
@@ -35,30 +35,16 @@ RUN apt-get update && \
|
||||
software-properties-common g++ make pkg-config libpython2-dev python-numpy swig libi2c-dev \
|
||||
libboost-program-options-dev libconfig++-dev
|
||||
|
||||
# Install dependencies to build SoapySDR and Lime Suite
|
||||
# Install SoapySDR and Lime Suite
|
||||
RUN add-apt-repository -y ppa:myriadrf/drivers && \
|
||||
add-apt-repository -y ppa:pothosware/framework && \
|
||||
add-apt-repository -y ppa:pothosware/support && \
|
||||
apt update && \
|
||||
apt -y install libi2c-dev libusb-1.0-0-dev git g++ cmake libsqlite3-dev libwxgtk3.0-gtk3-dev freeglut3-dev \
|
||||
python3-distutils gnuplot libfltk1.3-dev liboctave-dev
|
||||
|
||||
# Install SoapySDR from Source
|
||||
RUN git clone https://github.com/pothosware/SoapySDR.git && \
|
||||
cd SoapySDR && \
|
||||
git checkout tags/soapy-sdr-0.7.2 -b soapy-sdr-0.7.2 && \
|
||||
mkdir build && cd build && cmake .. && \
|
||||
make -j`nproc` && make install && ldconfig
|
||||
|
||||
# Install LimeSuite
|
||||
RUN git clone https://github.com/myriadrf/LimeSuite.git && \
|
||||
cd LimeSuite && \
|
||||
git checkout tags/v20.10.0 -b v20.10.0 && \
|
||||
mkdir builddir && cd builddir && cmake .. && \
|
||||
make -j`nproc` && make install && ldconfig && \
|
||||
cd ../udev-rules && sh ./install.sh
|
||||
apt -y install limesuite liblimesuite-dev limesuite-udev limesuite-images soapysdr-tools soapysdr-module-lms7
|
||||
|
||||
# UHD drivers for USRP
|
||||
RUN add-apt-repository ppa:ettusresearch/uhd && \
|
||||
apt update && apt -y install libuhd-dev libuhd3.15.0 uhd-host && \
|
||||
apt update && apt -y install libuhd-dev libuhd4.2.0 uhd-host && \
|
||||
uhd_images_downloader
|
||||
|
||||
# Get srsGUI, compile and install
|
||||
@@ -72,7 +58,7 @@ RUN git clone https://github.com/srsran/srsGUI && \
|
||||
# Get srsLTE, compile and install
|
||||
RUN git clone https://github.com/srsran/srsRAN.git && \
|
||||
cd srsRAN && \
|
||||
git checkout tags/release_21_04 && \
|
||||
git checkout tags/release_22_04 && \
|
||||
mkdir build && cd build && \
|
||||
cmake ../ && make -j`nproc` && make install && \
|
||||
ldconfig
|
||||
|
||||
194
srslte/enb.conf
194
srslte/enb.conf
@@ -12,6 +12,7 @@
|
||||
# gtp_bind_addr: Local IP address to bind for GTP connection
|
||||
# gtp_advertise_addr: IP address of eNB to advertise for DL GTP-U Traffic
|
||||
# s1c_bind_addr: Local IP address to bind for S1AP connection
|
||||
# s1c_bind_port: Source port for S1AP connection (0 means any)
|
||||
# n_prb: Number of Physical Resource Blocks (6,15,25,50,75,100)
|
||||
# tm: Transmission mode 1-4 (TM1 default)
|
||||
# nof_ports: Number of Tx ports (1 port default, set to 2 for TM2/3/4)
|
||||
@@ -24,7 +25,8 @@ mnc = MNC
|
||||
mme_addr = MME_IP
|
||||
gtp_bind_addr = SRS_ENB_IP
|
||||
s1c_bind_addr = SRS_ENB_IP
|
||||
n_prb = 25
|
||||
s1c_bind_port = 0
|
||||
n_prb = 50
|
||||
#tm = 4
|
||||
#nof_ports = 2
|
||||
|
||||
@@ -32,14 +34,14 @@ n_prb = 25
|
||||
# eNB configuration files
|
||||
#
|
||||
# sib_config: SIB1, SIB2 and SIB3 configuration file
|
||||
# note: when enabling mbms, use the sib.conf.mbsfn configuration file which includes SIB13
|
||||
# note: When enabling MBMS, use the sib.conf.mbsfn configuration file which includes SIB13
|
||||
# rr_config: Radio Resources configuration file
|
||||
# drb_config: DRB configuration file
|
||||
# rb_config: SRB/DRB configuration file
|
||||
#####################################################################
|
||||
[enb_files]
|
||||
sib_config = sib.conf
|
||||
rr_config = rr.conf
|
||||
drb_config = drb.conf
|
||||
sib_config = /etc/srsran/sib.conf
|
||||
rr_config = /etc/srsran/rr.conf
|
||||
rb_config = /etc/srsran/rb.conf
|
||||
|
||||
#####################################################################
|
||||
# RF configuration
|
||||
@@ -51,20 +53,19 @@ drb_config = drb.conf
|
||||
# Optional parameters:
|
||||
# dl_freq: Override DL frequency corresponding to dl_earfcn
|
||||
# ul_freq: Override UL frequency corresponding to dl_earfcn (must be set if dl_freq is set)
|
||||
# device_name: Device driver family.
|
||||
# Supported options: "auto" (uses first found), "UHD", "bladeRF", "soapy" or "zmq".
|
||||
# device_name: Device driver family
|
||||
# Supported options: "auto" (uses first driver found), "UHD", "bladeRF", "soapy", "zmq" or "Sidekiq"
|
||||
# device_args: Arguments for the device driver. Options are "auto" or any string.
|
||||
# Default for UHD: "recv_frame_size=9232,send_frame_size=9232"
|
||||
# Default for bladeRF: ""
|
||||
# time_adv_nsamples: Transmission time advance (in number of samples) to compensate for RF delay
|
||||
# from antenna to timestamp insertion.
|
||||
# Default "auto". B210 USRP: 100 samples, bladeRF: 27.
|
||||
# Default "auto". B210 USRP: 100 samples, bladeRF: 27
|
||||
#####################################################################
|
||||
[rf]
|
||||
# dl_earfcn = 3150
|
||||
#dl_earfcn = 3150
|
||||
tx_gain = 80
|
||||
rx_gain = 40
|
||||
#dl_earfcn = 6300
|
||||
#tx_gain = 56
|
||||
#rx_gain = 38
|
||||
#device_name = soapy
|
||||
@@ -90,8 +91,8 @@ rx_gain = 40
|
||||
#####################################################################
|
||||
# Packet capture configuration
|
||||
#
|
||||
# MAC-layer packets are captured to file a the compact format decoded
|
||||
# by the Wireshark. For decoding, use the UDP dissector and the UDP
|
||||
# MAC-layer packets are captured to a file in the compact format which can
|
||||
# be decoded by Wireshark. For decoding, use the UDP dissector and the UDP
|
||||
# heuristic dissection. Edit the preferences (Edit > Preferences >
|
||||
# Protocols > DLT_USER) for DLT_USER to add an entry for DLT=149 with
|
||||
# Protocol=udp. Further, enable the heuristic dissection in UDP under:
|
||||
@@ -105,33 +106,35 @@ rx_gain = 40
|
||||
# WRITE_SIB_PCAP enabled in srsenb/src/stack/mac/mac.cc if you want
|
||||
# SIB to be part of the MAC pcap file.
|
||||
#
|
||||
# S1AP Packets are captured to file in the compact format decoded by
|
||||
# the Wireshark s1ap dissector and with DLT 150.
|
||||
# S1AP Packets are captured to a file in the compact format which can
|
||||
# be decoded by the Wireshark s1ap dissector with DLT 150.
|
||||
# To use the dissector, edit the preferences for DLT_USER to
|
||||
# add an entry with DLT=150, Payload Protocol=s1ap.
|
||||
#
|
||||
# mac_enable: Enable MAC layer packet captures (true/false)
|
||||
# mac_filename: File path to use for packet captures
|
||||
# mac_enable: Enable MAC layer packet captures (true/false)
|
||||
# filename: File path to use for LTE MAC packet captures
|
||||
# nr_filename: File path to use for NR MAC packet captures
|
||||
# s1ap_enable: Enable or disable the PCAP.
|
||||
# s1ap_filename: File name where to save the PCAP.
|
||||
#
|
||||
# mac_net_enable: Enable MAC layer packet captures sent over the network (true/false default: false)
|
||||
# bind_ip: Bind IP address for MAC network trace (default: "0.0.0.0")
|
||||
# bind_port: Bind port for MAC network trace (default: 5687)
|
||||
# client_ip: Client IP address for MAC network trace (default "127.0.0.1")
|
||||
# client_ip: Client IP address for MAC network trace (default: "127.0.0.1")
|
||||
# client_port Client IP address for MAC network trace (default: 5847)
|
||||
#####################################################################
|
||||
[pcap]
|
||||
enable = false
|
||||
filename = /mnt/srslte/enb.pcap
|
||||
s1ap_enable = false
|
||||
s1ap_filename = /mnt/srslte/enb_s1ap.pcap
|
||||
#enable = false
|
||||
#filename = /mnt/srslte/enb_mac.pcap
|
||||
#nr_filename = /mnt/srslte/enb_mac_nr.pcap
|
||||
#s1ap_enable = false
|
||||
#s1ap_filename = /mnt/srslte/enb_s1ap.pcap
|
||||
|
||||
mac_net_enable = false
|
||||
bind_ip = 0.0.0.0
|
||||
bind_port = 5687
|
||||
client_ip = 127.0.0.1
|
||||
client_port = 5847
|
||||
#mac_net_enable = false
|
||||
#bind_ip = 0.0.0.0
|
||||
#bind_port = 5687
|
||||
#client_ip = 127.0.0.1
|
||||
#client_port = 5847
|
||||
|
||||
#####################################################################
|
||||
# Log configuration
|
||||
@@ -166,19 +169,40 @@ enable = false
|
||||
# Scheduler configuration options
|
||||
#
|
||||
# sched_policy: User MAC scheduling policy (E.g. time_rr, time_pf)
|
||||
# min_aggr_level: Optional minimum aggregation level index (l=log2(L) can be 0, 1, 2 or 3)
|
||||
# max_aggr_level: Optional maximum aggregation level index (l=log2(L) can be 0, 1, 2 or 3)
|
||||
# adaptive_aggr_level: Boolean flag to enable/disable adaptive aggregation level based on target BLER
|
||||
# pdsch_mcs: Optional fixed PDSCH MCS (ignores reported CQIs if specified)
|
||||
# pdsch_max_mcs: Optional PDSCH MCS limit
|
||||
# pusch_mcs: Optional fixed PUSCH MCS (ignores reported CQIs if specified)
|
||||
# pusch_max_mcs: Optional PUSCH MCS limit
|
||||
# min_nof_ctrl_symbols: Minimum number of control symbols
|
||||
# max_nof_ctrl_symbols: Maximum number of control symbols
|
||||
# pucch_multiplex_enable: Allow PUCCH HARQ to collide with PUSCH and other PUCCH
|
||||
# pucch_harq_max_rb: Maximum number of RB to be used for PUCCH on the edges of the grid.
|
||||
# If defined and greater than 0, the scheduler will avoid DL PDCCH allocations if
|
||||
# PUCCH HARQ falls outside this region
|
||||
# target_bler: Target BLER (in decimal) to achieve via adaptive link
|
||||
# max_delta_dl_cqi: Maximum shift in CQI for adaptive DL link
|
||||
# max_delta_ul_snr: Maximum shift in UL SNR for adaptive UL link
|
||||
# adaptive_dl_mcs_step_size: Step size or learning rate used in adaptive DL MCS link
|
||||
# adaptive_ul_mcs_step_size: Step size or learning rate used in adaptive UL MCS link
|
||||
# min_tpc_tti_interval: Minimum TTI interval between TPCs different than 1
|
||||
# ul_snr_avg_alpha: Exponential Average alpha coefficient used in estimation of UL SNR
|
||||
# init_ul_snr_value: Initial UL SNR value used for computing MCS in the first UL grant
|
||||
# init_dl_cqi: DL CQI value used before any CQI report is available to the eNB
|
||||
# max_sib_coderate: Upper bound on SIB and RAR grants coderate
|
||||
# pdcch_cqi_offset: CQI offset in derivation of PDCCH aggregation level
|
||||
# nr_pdsch_mcs: Optional fixed NR PDSCH MCS (ignores reported CQIs if specified)
|
||||
# nr_pusch_mcs: Optional fixed NR PUSCH MCS (ignores reported CQIs if specified)
|
||||
#
|
||||
#####################################################################
|
||||
[scheduler]
|
||||
#policy = time_pf
|
||||
#policy_args = 2
|
||||
#max_aggr_level = -1
|
||||
#min_aggr_level = 0
|
||||
#max_aggr_level = 3
|
||||
#adaptive_aggr_level = false
|
||||
#pdsch_mcs = -1
|
||||
#pdsch_max_mcs = -1
|
||||
#pusch_mcs = -1
|
||||
@@ -186,14 +210,28 @@ enable = false
|
||||
#min_nof_ctrl_symbols = 1
|
||||
#max_nof_ctrl_symbols = 3
|
||||
#pucch_multiplex_enable = false
|
||||
#pucch_harq_max_rb = 0
|
||||
#target_bler = 0.05
|
||||
#max_delta_dl_cqi = 5
|
||||
#max_delta_ul_snr = 5
|
||||
#adaptive_dl_mcs_step_size = 0.001
|
||||
#adaptive_ul_mcs_step_size = 0.001
|
||||
#min_tpc_tti_interval = 1
|
||||
#ul_snr_avg_alpha=0.05
|
||||
#init_ul_snr_value=5
|
||||
#init_dl_cqi=5
|
||||
#max_sib_coderate=0.3
|
||||
#pdcch_cqi_offset=0
|
||||
nr_pdsch_mcs=28
|
||||
#nr_pusch_mcs=28
|
||||
|
||||
#####################################################################
|
||||
# eMBMS configuration options
|
||||
#
|
||||
# enable: Enable MBMS transmission in the eNB
|
||||
# m1u_multiaddr: Multicast addres the M1-U socket will register to
|
||||
# m1u_if_addr: Address of the inteferface the M1-U interface will listen for multicast packets.
|
||||
# mcs: Modulation and Coding scheme for MBMS traffic.
|
||||
# m1u_multiaddr: Multicast address the M1-U socket will register to
|
||||
# m1u_if_addr: Address of the interface the M1-U interface will listen to for multicast packets
|
||||
# mcs: Modulation and Coding scheme for MBMS traffic
|
||||
#
|
||||
#####################################################################
|
||||
[embms]
|
||||
@@ -206,7 +244,7 @@ enable = false
|
||||
|
||||
#####################################################################
|
||||
# Channel emulator options:
|
||||
# enable: Enable/Disable internal Downlink/Uplink channel emulator
|
||||
# enable: Enable/disable internal Downlink/Uplink channel emulator
|
||||
#
|
||||
# -- AWGN Generator
|
||||
# awgn.enable: Enable/disable AWGN generator
|
||||
@@ -219,8 +257,8 @@ enable = false
|
||||
# -- Delay Emulator delay(t) = delay_min + (delay_max - delay_min) * (1 + sin(2pi*t/period)) / 2
|
||||
# Maximum speed [m/s]: (delay_max - delay_min) * pi * 300 / period
|
||||
# delay.enable: Enable/disable delay simulator
|
||||
# delay.period_s: Delay period in seconds.
|
||||
# delay.init_time_s: Delay initial time in seconds.
|
||||
# delay.period_s: Delay period in seconds
|
||||
# delay.init_time_s: Delay initial time in seconds
|
||||
# delay.maximum_us: Maximum delay in microseconds
|
||||
# delay.minumum_us: Minimum delay in microseconds
|
||||
#
|
||||
@@ -230,7 +268,7 @@ enable = false
|
||||
# rlf.t_off_ms: Time for Off state of the channel (ms)
|
||||
#
|
||||
# -- High Speed Train Doppler model simulator
|
||||
# hst.enable: Enable/Disable HST simulator
|
||||
# hst.enable: Enable/disable HST simulator
|
||||
# hst.period_s: HST simulation period in seconds
|
||||
# hst.fd_hz: Doppler frequency in Hz
|
||||
# hst.init_time_s: Initial time in seconds
|
||||
@@ -293,29 +331,72 @@ enable = false
|
||||
#fd_hz = -750.0
|
||||
#init_time_s = 0.0
|
||||
|
||||
#####################################################################
|
||||
# CFR configuration options
|
||||
#
|
||||
# The CFR module provides crest factor reduction for the transmitted signal.
|
||||
#
|
||||
# enable: Enable or disable the CFR. Default: disabled
|
||||
#
|
||||
# mode: manual: CFR threshold is set by cfr_manual_thres (default).
|
||||
# auto_ema: CFR threshold is adaptive based on the signal PAPR. Power avg. with Exponential Moving Average.
|
||||
# The time constant of the averaging can be tweaked with the ema_alpha parameter.
|
||||
# auto_cma: CFR threshold is adaptive based on the signal PAPR. Power avg. with Cumulative Moving Average.
|
||||
# Use with care, as CMA's increasingly slow response may be unsuitable for most use cases.
|
||||
#
|
||||
# strength: Ratio between amplitude-limited vs unprocessed signal (0 to 1). Default: 1
|
||||
# manual_thres: Fixed manual clipping threshold for CFR manual mode. Default: 0.5
|
||||
# auto_target_papr: Signal PAPR target (in dB) in CFR auto modes. output PAPR can be higher due to peak smoothing. Default: 8
|
||||
# ema_alpha: Alpha coefficient for the power average in auto_ema mode. Default: 1/7
|
||||
#
|
||||
#####################################################################
|
||||
[cfr]
|
||||
#enable = false
|
||||
#mode = manual
|
||||
#manual_thres = 0.5
|
||||
#strength = 1
|
||||
#auto_target_papr = 8
|
||||
#ema_alpha = 0.0143
|
||||
|
||||
#####################################################################
|
||||
# Expert configuration options
|
||||
#
|
||||
# pusch_max_its: Maximum number of turbo decoder iterations (Default 4)
|
||||
# pusch_8bit_decoder: Use 8-bit for LLR representation and turbo decoder trellis computation (Experimental)
|
||||
# nof_phy_threads: Selects the number of PHY threads (maximum 4, minimum 1, default 3)
|
||||
# metrics_period_secs: Sets the period at which metrics are requested from the eNB.
|
||||
# pusch_max_its: Maximum number of turbo decoder iterations (default: 4)
|
||||
# nr_pusch_max_its: Maximum number of LDPC iterations for NR (Default 10)
|
||||
# pusch_8bit_decoder: Use 8-bit for LLR representation and turbo decoder trellis computation (experimental)
|
||||
# nof_phy_threads: Selects the number of PHY threads (maximum: 4, minimum: 1, default: 3)
|
||||
# metrics_period_secs: Sets the period at which metrics are requested from the eNB
|
||||
# metrics_csv_enable: Write eNB metrics to CSV file.
|
||||
# metrics_csv_filename: File path to use for CSV metrics.
|
||||
# tracing_enable: Write source code tracing information to a file.
|
||||
# tracing_filename: File path to use for tracing information.
|
||||
# tracing_buffcapacity: Maximum capacity in bytes the tracing framework can store.
|
||||
# pregenerate_signals: Pregenerate uplink signals after attach. Improves CPU performance.
|
||||
# metrics_csv_filename: File path to use for CSV metrics
|
||||
# report_json_enable: Write eNB report to JSON file (default: disabled)
|
||||
# report_json_filename: Report JSON filename (default: /mnt/srslte/enb_report.json)
|
||||
# report_json_asn1_oct: Prints ASN1 messages encoded as an octet string instead of plain text in the JSON report file
|
||||
# alarms_log_enable: Enable Alarms logging (default: disabled)
|
||||
# alarms_filename: Alarms logging filename (default: /mnt/srslte/alarms.log)
|
||||
# tracing_enable: Write source code tracing information to a file
|
||||
# tracing_filename: File path to use for tracing information
|
||||
# tracing_buffcapacity: Maximum capacity in bytes the tracing framework can store
|
||||
# stdout_ts_enable: Prints once per second the timestamp into stdout
|
||||
# tx_amplitude: Transmit amplitude factor (set 0-1 to reduce PAPR)
|
||||
# rrc_inactivity_timer Inactivity timeout used to remove UE context from RRC (in milliseconds).
|
||||
# rrc_inactivity_timer Inactivity timeout used to remove UE context from RRC (in milliseconds)
|
||||
# max_mac_dl_kos: Maximum number of consecutive KOs in DL before triggering the UE's release (default: 100)
|
||||
# max_mac_ul_kos: Maximum number of consecutive KOs in UL before triggering the UE's release (default: 100)
|
||||
# max_prach_offset_us: Maximum allowed RACH offset (in us)
|
||||
# eea_pref_list: Ordered preference list for the selection of encryption algorithm (EEA) (default: EEA0, EEA2, EEA1).
|
||||
# eia_pref_list: Ordered preference list for the selection of integrity algorithm (EIA) (default: EIA2, EIA1, EIA0).
|
||||
#
|
||||
# nof_prealloc_ues: Number of UE memory resources to preallocate during eNB initialization for faster UE creation (default: 8)
|
||||
# rlf_release_timer_ms: Time taken by eNB to release UE context after it detects an RLF
|
||||
# eea_pref_list: Ordered preference list for the selection of encryption algorithm (EEA) (default: EEA0, EEA2, EEA1)
|
||||
# eia_pref_list: Ordered preference list for the selection of integrity algorithm (EIA) (default: EIA2, EIA1, EIA0)
|
||||
# gtpu_tunnel_timeout: Time that GTPU takes to release indirect forwarding tunnel since the last received GTPU PDU (0 for no timer)
|
||||
# ts1_reloc_prep_timeout: S1AP TS 36.413 TS1RelocPrep Expiry Timeout value in milliseconds
|
||||
# ts1_reloc_overall_timeout: S1AP TS 36.413 TS1RelocOverall Expiry Timeout value in milliseconds
|
||||
# rlf_release_timer_ms: Time taken by eNB to release UE context after it detects a RLF
|
||||
# rlf_min_ul_snr_estim: SNR threshold in dB below which the enb is notified with RLF ko
|
||||
# s1_setup_max_retries: Maximum amount of retries to setup the S1AP connection. If this value is exceeded, an alarm is written to the log. -1 means infinity.
|
||||
# rx_gain_offset: RX Gain offset to add to rx_gain to calibrate RSRP readings
|
||||
#####################################################################
|
||||
[expert]
|
||||
#pusch_max_its = 8 # These are half iterations
|
||||
#nr_pusch_max_its = 10
|
||||
#pusch_8bit_decoder = false
|
||||
#nof_phy_threads = 3
|
||||
#metrics_period_secs = 1
|
||||
@@ -323,15 +404,28 @@ enable = false
|
||||
#metrics_csv_filename = /mnt/srslte/enb_metrics.csv
|
||||
#report_json_enable = true
|
||||
#report_json_filename = /mnt/srslte/enb_report.json
|
||||
#report_json_asn1_oct = false
|
||||
#alarms_log_enable = true
|
||||
#alarms_filename = /mnt/srslte/enb_alarms.log
|
||||
#tracing_enable = true
|
||||
#tracing_filename = /mnt/srslte/enb_tracing.log
|
||||
#tracing_buffcapacity = 1000000
|
||||
#pregenerate_signals = false
|
||||
#stdout_ts_enable = false
|
||||
#tx_amplitude = 0.6
|
||||
#rrc_inactivity_timer = 30000
|
||||
#max_nof_kos = 100
|
||||
#max_mac_dl_kos = 100
|
||||
#max_mac_ul_kos = 100
|
||||
#max_prach_offset_us = 30
|
||||
#nof_prealloc_ues = 8
|
||||
#rlf_release_timer_ms = 4000
|
||||
#lcid_padding = 3
|
||||
#eea_pref_list = EEA0, EEA2, EEA1
|
||||
#eia_pref_list = EIA2, EIA1, EIA0
|
||||
#gtpu_tunnel_timeout = 0
|
||||
#extended_cp = false
|
||||
#ts1_reloc_prep_timeout = 10000
|
||||
#ts1_reloc_overall_timeout = 10000
|
||||
#rlf_release_timer_ms = 4000
|
||||
#rlf_min_ul_snr_estim = -2
|
||||
#s1_setup_max_retries = -1
|
||||
#rx_gain_offset = 62
|
||||
|
||||
@@ -31,16 +31,25 @@ export IP_ADDR=$(awk 'END{print $1}' /etc/hosts)
|
||||
mkdir -p /etc/srsran
|
||||
|
||||
cp /mnt/srslte/enb.conf /etc/srsran
|
||||
cp /mnt/srslte/drb.conf /etc/srsran
|
||||
cp /mnt/srslte/epc.conf /etc/srsran
|
||||
cp /mnt/srslte/mbms.conf /etc/srsran
|
||||
cp /mnt/srslte/rr.conf /etc/srsran
|
||||
cp /mnt/srslte/rb.conf /etc/srsran
|
||||
cp /mnt/srslte/sib.conf /etc/srsran
|
||||
cp /mnt/srslte/ue.conf /etc/srsran
|
||||
cp /mnt/srslte/user_db.csv /etc/srsran
|
||||
|
||||
if [[ -z "$COMPONENT_NAME" ]]; then
|
||||
echo "Error: COMPONENT_NAME environment variable not set"; exit 1;
|
||||
elif [[ "$COMPONENT_NAME" =~ ^(gnb$) ]]; then
|
||||
echo "Deploying component: '$COMPONENT_NAME'"
|
||||
cp /mnt/srslte/rr_gnb.conf /etc/srsran/rr.conf
|
||||
sed -i 's|MME_IP|'$AMF_IP'|g' /etc/srsran/enb.conf
|
||||
elif [[ "$COMPONENT_NAME" =~ ^(enb$) ]]; then
|
||||
echo "Deploying component: '$COMPONENT_NAME'"
|
||||
cp /mnt/srslte/rr.conf /etc/srsran
|
||||
sed -i 's|MME_IP|'$MME_IP'|g' /etc/srsran/enb.conf
|
||||
else
|
||||
echo "Error: Invalid component name: '$COMPONENT_NAME'"
|
||||
fi
|
||||
|
||||
sed -i 's|MNC|'$MNC'|g' /etc/srsran/enb.conf
|
||||
sed -i 's|MCC|'$MCC'|g' /etc/srsran/enb.conf
|
||||
sed -i 's|MME_IP|'$MME_IP'|g' /etc/srsran/enb.conf
|
||||
sed -i 's|SRS_ENB_IP|'$SRS_ENB_IP'|g' /etc/srsran/enb.conf
|
||||
|
||||
# Sync docker time
|
||||
|
||||
106
srslte/epc.conf
106
srslte/epc.conf
@@ -1,106 +0,0 @@
|
||||
#####################################################################
|
||||
# srsEPC configuration file
|
||||
#####################################################################
|
||||
|
||||
#####################################################################
|
||||
# MME configuration
|
||||
#
|
||||
# mme_code: 8-bit MME code identifies the MME within a group.
|
||||
# mme_group: 16-bit MME group identifier.
|
||||
# tac: 16-bit Tracking Area Code.
|
||||
# mcc: Mobile Country Code
|
||||
# mnc: Mobile Network Code
|
||||
# apn: Set Access Point Name (APN)
|
||||
# mme_bind_addr: IP bind addr to listen for eNB S1-MME connnections
|
||||
# dns_addr: DNS server address for the UEs
|
||||
# encryption_algo: Preferred encryption algorithm for NAS layer
|
||||
# (supported: EEA0 (default), EEA1, EEA2, EEA3)
|
||||
# integrity_algo: Preferred integrity protection algorithm for NAS
|
||||
# (supported: EIA0 (rejected by most UEs), EIA1 (default), EIA2, EIA3
|
||||
# paging_timer: Value of paging timer in seconds (T3413)
|
||||
#
|
||||
#####################################################################
|
||||
[mme]
|
||||
mme_code = 0x1a
|
||||
mme_group = 0x0001
|
||||
tac = 0x0007
|
||||
mcc = 001
|
||||
mnc = 01
|
||||
mme_bind_addr = 127.0.1.100
|
||||
apn = srsapn
|
||||
dns_addr = 8.8.8.8
|
||||
encryption_algo = EEA0
|
||||
integrity_algo = EIA1
|
||||
paging_timer = 2
|
||||
|
||||
#####################################################################
|
||||
# HSS configuration
|
||||
#
|
||||
# db_file: Location of .csv file that stores UEs information.
|
||||
#
|
||||
#####################################################################
|
||||
[hss]
|
||||
db_file = user_db.csv
|
||||
|
||||
#####################################################################
|
||||
# SP-GW configuration
|
||||
#
|
||||
# gtpu_bind_addr: GTP-U bind address.
|
||||
# sgi_if_addr: SGi TUN interface IP address.
|
||||
# sgi_if_name: SGi TUN interface name.
|
||||
# max_paging_queue: Maximum packets in paging queue (per UE).
|
||||
#
|
||||
#####################################################################
|
||||
|
||||
[spgw]
|
||||
gtpu_bind_addr = 127.0.1.100
|
||||
sgi_if_addr = 172.16.0.1
|
||||
sgi_if_name = srs_spgw_sgi
|
||||
max_paging_queue = 100
|
||||
|
||||
####################################################################
|
||||
# PCAP configuration
|
||||
#
|
||||
# Packets are captured to file in the compact format decoded by
|
||||
# the Wireshark s1ap dissector and with DLT 150.
|
||||
# To use the dissector, edit the preferences for DLT_USER to
|
||||
# add an entry with DLT=150, Payload Protocol=s1ap.
|
||||
#
|
||||
# enable: Enable or disable the PCAP.
|
||||
# filename: File name where to save the PCAP.
|
||||
#
|
||||
####################################################################
|
||||
[pcap]
|
||||
enable = false
|
||||
filename = /tmp/epc.pcap
|
||||
|
||||
####################################################################
|
||||
# Log configuration
|
||||
#
|
||||
# Log levels can be set for individual layers. "all_level" sets log
|
||||
# level for all layers unless otherwise configured.
|
||||
# Format: e.g. s1ap_level = info
|
||||
#
|
||||
# In the same way, packet hex dumps can be limited for each level.
|
||||
# "all_hex_limit" sets the hex limit for all layers unless otherwise
|
||||
# configured.
|
||||
# Format: e.g. s1ap_hex_limit = 32
|
||||
#
|
||||
# Logging layers: nas, s1ap, mme_gtpc, spgw_gtpc, gtpu, spgw, hss, all
|
||||
# Logging levels: debug, info, warning, error, none
|
||||
#
|
||||
# filename: File path to use for log output. Can be set to stdout
|
||||
# to print logs to standard output
|
||||
#####################################################################
|
||||
[log]
|
||||
all_level = info
|
||||
all_hex_limit = 32
|
||||
filename = /tmp/epc.log
|
||||
|
||||
#nas_level = debug
|
||||
#s1ap_level = debug
|
||||
#mme_gtpc_level = debug
|
||||
#spgw_gtpc_level = debug
|
||||
#gtpu_level = debug
|
||||
#spgw_level = debug
|
||||
#hss_level = debug
|
||||
@@ -1,47 +0,0 @@
|
||||
#####################################################################
|
||||
# srsMBMS configuration file
|
||||
#####################################################################
|
||||
|
||||
#####################################################################
|
||||
# MBMS-GW configuration
|
||||
#
|
||||
# name: MBMS-GW name
|
||||
# sgi_mb_if_name: SGi-mb TUN interface name
|
||||
# sgi_mb_if_addr: SGi-mb interface IP address
|
||||
# sgi_mb_if_mask: SGi-mb interface IP mask
|
||||
# m1u_multi_addr: Multicast group for eNBs (TODO this should be setup with M2/M3)
|
||||
# m1u_multi_if: IP of local interface for multicast traffic
|
||||
# m1u_multi_ttl: TTL for M1-U multicast traffic
|
||||
#
|
||||
#####################################################################
|
||||
[mbms_gw]
|
||||
name = srsmbmsgw01
|
||||
sgi_mb_if_name = sgi_mb
|
||||
sgi_mb_if_addr = 172.16.0.254
|
||||
sgi_mb_if_mask = 255.255.255.255
|
||||
m1u_multi_addr = 239.255.0.1
|
||||
m1u_multi_if = 127.0.1.200
|
||||
m1u_multi_ttl = 1
|
||||
|
||||
####################################################################
|
||||
# Log configuration
|
||||
#
|
||||
# Log levels can be set for individual layers. "all_level" sets log
|
||||
# level for all layers unless otherwise configured.
|
||||
# Format: e.g. s1ap_level = info
|
||||
#
|
||||
# In the same way, packet hex dumps can be limited for each level.
|
||||
# "all_hex_limit" sets the hex limit for all layers unless otherwise
|
||||
# configured.
|
||||
# Format: e.g. s1ap_hex_limit = 32
|
||||
#
|
||||
# Logging layers: mbms_gw, all
|
||||
# Logging levels: debug, info, warning, error, none
|
||||
#
|
||||
# filename: File path to use for log output. Can be set to stdout
|
||||
# to print logs to standard output
|
||||
#####################################################################
|
||||
[log]
|
||||
all_level = debug
|
||||
all_hex_limit = 32
|
||||
filename = /tmp/mbms.log
|
||||
@@ -1,8 +1,44 @@
|
||||
|
||||
// All times are in ms. Use -1 for infinity, where available
|
||||
|
||||
qci_config = (
|
||||
// 4G Section
|
||||
|
||||
// srb1_config = {
|
||||
// rlc_config = {
|
||||
// ul_am = {
|
||||
// t_poll_retx = 45;
|
||||
// poll_pdu = -1;
|
||||
// poll_byte = -1;
|
||||
// max_retx_thresh = 4;
|
||||
// };
|
||||
// dl_am = {
|
||||
// t_reordering = 35;
|
||||
// t_status_prohibit = 0;
|
||||
// };
|
||||
// enb_specific = {
|
||||
// dl_max_retx_thresh = 32;
|
||||
// };
|
||||
// };
|
||||
// }
|
||||
|
||||
// srb2_config = {
|
||||
// rlc_config = {
|
||||
// ul_am = {
|
||||
// t_poll_retx = 45;
|
||||
// poll_pdu = -1;
|
||||
// poll_byte = -1;
|
||||
// max_retx_thresh = 4;
|
||||
// };
|
||||
// dl_am = {
|
||||
// t_reordering = 35;
|
||||
// t_status_prohibit = 0;
|
||||
// };
|
||||
// enb_specific = {
|
||||
// dl_max_retx_thresh = 32;
|
||||
// };
|
||||
// };
|
||||
// }
|
||||
|
||||
qci_config = (
|
||||
{
|
||||
qci=1;
|
||||
pdcp_config = {
|
||||
@@ -24,6 +60,9 @@ qci_config = (
|
||||
bucket_size_duration = 100;
|
||||
log_chan_group = 1;
|
||||
};
|
||||
enb_specific = {
|
||||
dl_max_retx_thresh = 32;
|
||||
};
|
||||
},
|
||||
{
|
||||
qci=2;
|
||||
@@ -46,6 +85,9 @@ qci_config = (
|
||||
bucket_size_duration = 100;
|
||||
log_chan_group = 1;
|
||||
};
|
||||
enb_specific = {
|
||||
dl_max_retx_thresh = 32;
|
||||
};
|
||||
},
|
||||
{
|
||||
qci=5;
|
||||
@@ -71,9 +113,12 @@ qci_config = (
|
||||
bucket_size_duration = 100;
|
||||
log_chan_group = 2;
|
||||
};
|
||||
enb_specific = {
|
||||
dl_max_retx_thresh = 32;
|
||||
};
|
||||
},
|
||||
{
|
||||
qci=7;
|
||||
qci = 7;
|
||||
pdcp_config = {
|
||||
discard_timer = -1;
|
||||
pdcp_sn_size = 12;
|
||||
@@ -93,9 +138,12 @@ qci_config = (
|
||||
bucket_size_duration = 100;
|
||||
log_chan_group = 2;
|
||||
};
|
||||
enb_specific = {
|
||||
dl_max_retx_thresh = 32;
|
||||
};
|
||||
},
|
||||
{
|
||||
qci=9;
|
||||
qci = 9;
|
||||
pdcp_config = {
|
||||
discard_timer = 150;
|
||||
status_report_required = true;
|
||||
@@ -118,6 +166,62 @@ qci_config = (
|
||||
bucket_size_duration = 100;
|
||||
log_chan_group = 3;
|
||||
};
|
||||
enb_specific = {
|
||||
dl_max_retx_thresh = 32;
|
||||
};
|
||||
}
|
||||
|
||||
);
|
||||
|
||||
// 5G Section
|
||||
five_qi_config = (
|
||||
{
|
||||
five_qi = 7;
|
||||
pdcp_nr_config = {
|
||||
drb = {
|
||||
discard_timer = 50;
|
||||
pdcp_sn_size_ul = 18;
|
||||
pdcp_sn_size_dl = 18;
|
||||
};
|
||||
t_reordering = 50;
|
||||
};
|
||||
rlc_config = {
|
||||
um_bi_dir = {
|
||||
ul_um = {
|
||||
sn_field_len = 12;
|
||||
};
|
||||
dl_um = {
|
||||
sn_field_len = 12;
|
||||
t_reassembly = 50;
|
||||
};
|
||||
};
|
||||
};
|
||||
},
|
||||
{
|
||||
five_qi = 9;
|
||||
pdcp_nr_config = {
|
||||
drb = {
|
||||
discard_timer = 50;
|
||||
pdcp_sn_size_ul = 18;
|
||||
pdcp_sn_size_dl = 18;
|
||||
};
|
||||
t_reordering = 50;
|
||||
};
|
||||
rlc_config = {
|
||||
am = {
|
||||
ul_am = {
|
||||
sn_field_len = 12;
|
||||
t_poll_retx = 50;
|
||||
poll_pdu = 4;
|
||||
poll_byte = 3000;
|
||||
max_retx_thres = 4;
|
||||
};
|
||||
dl_am = {
|
||||
sn_field_len = 12;
|
||||
t_reassembly = 50;
|
||||
t_status_prohibit = 50;
|
||||
};
|
||||
};
|
||||
};
|
||||
}
|
||||
);
|
||||
|
||||
@@ -45,8 +45,8 @@ phy_cnfg =
|
||||
simultaneousAckCQI = true;
|
||||
period = 40; // in ms
|
||||
//subframe = [0, 10, 20, 30]; // Optional vector of subframe indices every period where CQI resources will be allocated (default uses all)
|
||||
nof_prb = 1;
|
||||
m_ri = 8; // RI period in CQI period
|
||||
//subband_k = 1; // If enabled and > 0, configures sub-band CQI reporting and defines K (see 36.213 7.2.2). If disabled, configures wideband CQI
|
||||
};
|
||||
};
|
||||
|
||||
@@ -59,12 +59,17 @@ cell_list =
|
||||
pci = 1;
|
||||
// root_seq_idx = 204;
|
||||
dl_earfcn = 3150;
|
||||
//dl_earfcn = 6300;
|
||||
//ul_earfcn = 21400;
|
||||
ho_active = false;
|
||||
//meas_gap_period = 0; // 0 (inactive), 40 or 80
|
||||
//meas_gap_offset_subframe = [6, 12, 18, 24, 30];
|
||||
// target_pusch_sinr = -1;
|
||||
// target_pucch_sinr = -1;
|
||||
// enable_phr_handling = false;
|
||||
// min_phr_thres = 0;
|
||||
// allowed_meas_bw = 6;
|
||||
// t304 = 2000; // in msec. possible values: 50, 100, 150, 200, 500, 1000, 2000
|
||||
|
||||
// CA cells
|
||||
scell_list = (
|
||||
@@ -80,17 +85,34 @@ cell_list =
|
||||
pci = 2;
|
||||
//direct_forward_path_available = false;
|
||||
//allowed_meas_bw = 6;
|
||||
//cell_individual_offset = 0;
|
||||
}
|
||||
);
|
||||
|
||||
// ReportCfg (only A3 supported)
|
||||
meas_report_desc = {
|
||||
a3_report_type = "RSRP";
|
||||
a3_offset = 6;
|
||||
a3_hysteresis = 0;
|
||||
a3_time_to_trigger = 480;
|
||||
rsrq_config = 4;
|
||||
};
|
||||
// Select measurement report configuration (all reports are combined with all measurement objects)
|
||||
meas_report_desc =
|
||||
(
|
||||
{
|
||||
eventA = 3
|
||||
a3_offset = 6;
|
||||
hysteresis = 0;
|
||||
time_to_trigger = 480;
|
||||
trigger_quant = "RSRP";
|
||||
max_report_cells = 1;
|
||||
report_interv = 120;
|
||||
report_amount = 1;
|
||||
}
|
||||
);
|
||||
meas_quant_desc = {
|
||||
// averaging filter coefficient
|
||||
rsrq_config = 4;
|
||||
rsrp_config = 4;
|
||||
};
|
||||
}
|
||||
// Add here more cells
|
||||
);
|
||||
|
||||
nr_cell_list =
|
||||
(
|
||||
// no NR cells
|
||||
);
|
||||
69
srslte/rr_gnb.conf
Normal file
69
srslte/rr_gnb.conf
Normal file
@@ -0,0 +1,69 @@
|
||||
mac_cnfg =
|
||||
{
|
||||
phr_cnfg =
|
||||
{
|
||||
dl_pathloss_change = "dB3"; // Valid: 1, 3, 6 or INFINITY
|
||||
periodic_phr_timer = 50;
|
||||
prohibit_phr_timer = 0;
|
||||
};
|
||||
ulsch_cnfg =
|
||||
{
|
||||
max_harq_tx = 4;
|
||||
periodic_bsr_timer = 20; // in ms
|
||||
retx_bsr_timer = 320; // in ms
|
||||
};
|
||||
|
||||
time_alignment_timer = -1; // -1 is infinity
|
||||
};
|
||||
|
||||
phy_cnfg =
|
||||
{
|
||||
phich_cnfg =
|
||||
{
|
||||
duration = "Normal";
|
||||
resources = "1/6";
|
||||
};
|
||||
|
||||
pusch_cnfg_ded =
|
||||
{
|
||||
beta_offset_ack_idx = 6;
|
||||
beta_offset_ri_idx = 6;
|
||||
beta_offset_cqi_idx = 6;
|
||||
};
|
||||
|
||||
// PUCCH-SR resources are scheduled on time-frequeny domain first, then multiplexed in the same resource.
|
||||
sched_request_cnfg =
|
||||
{
|
||||
dsr_trans_max = 64;
|
||||
period = 20; // in ms
|
||||
//subframe = [1, 11]; // Optional vector of subframe indices allowed for SR transmissions (default uses all)
|
||||
nof_prb = 1; // number of PRBs on each extreme used for SR (total prb is twice this number)
|
||||
};
|
||||
cqi_report_cnfg =
|
||||
{
|
||||
mode = "periodic";
|
||||
simultaneousAckCQI = true;
|
||||
period = 40; // in ms
|
||||
//subframe = [0, 10, 20, 30]; // Optional vector of subframe indices every period where CQI resources will be allocated (default uses all)
|
||||
m_ri = 8; // RI period in CQI period
|
||||
//subband_k = 1; // If enabled and > 0, configures sub-band CQI reporting and defines K (see 36.213 7.2.2). If disabled, configures wideband CQI
|
||||
};
|
||||
};
|
||||
|
||||
cell_list =
|
||||
(
|
||||
|
||||
);
|
||||
|
||||
nr_cell_list =
|
||||
(
|
||||
{
|
||||
rf_port = 0;
|
||||
cell_id = 1;
|
||||
root_seq_idx = 1;
|
||||
tac = 1;
|
||||
pci = 500;
|
||||
dl_arfcn = 368500;
|
||||
band = 3;
|
||||
}
|
||||
);
|
||||
416
srslte/ue.conf
416
srslte/ue.conf
@@ -1,416 +0,0 @@
|
||||
#####################################################################
|
||||
# srsUE configuration file
|
||||
#####################################################################
|
||||
|
||||
#####################################################################
|
||||
# RF configuration
|
||||
#
|
||||
# freq_offset: Uplink and Downlink optional frequency offset (in Hz)
|
||||
# tx_gain: Transmit gain (dB).
|
||||
# rx_gain: Optional receive gain (dB). If disabled, AGC if enabled
|
||||
#
|
||||
# nof_antennas: Number of antennas per carrier (all carriers have the same number of antennas)
|
||||
# device_name: Device driver family. Supported options: "auto" (uses first found), "UHD" or "bladeRF"
|
||||
# device_args: Arguments for the device driver. Options are "auto" or any string.
|
||||
# Default for UHD: "recv_frame_size=9232,send_frame_size=9232"
|
||||
# Default for bladeRF: ""
|
||||
# device_args_2: Arguments for the RF device driver 2.
|
||||
# device_args_3: Arguments for the RF device driver 3.
|
||||
# time_adv_nsamples: Transmission time advance (in number of samples) to compensate for RF delay
|
||||
# from antenna to timestamp insertion.
|
||||
# Default "auto". B210 USRP: 100 samples, bladeRF: 27.
|
||||
# continuous_tx: Transmit samples continuously to the radio or on bursts (auto/yes/no).
|
||||
# Default is auto (yes for UHD, no for rest)
|
||||
#####################################################################
|
||||
[rf]
|
||||
freq_offset = 0
|
||||
tx_gain = 80
|
||||
#rx_gain = 40
|
||||
|
||||
#nof_antennas = 1
|
||||
|
||||
# For best performance in 2x2 MIMO and >= 15 MHz use the following device_args settings:
|
||||
# USRP B210: num_recv_frames=64,num_send_frames=64
|
||||
|
||||
# For best performance when BW<5 MHz (25 PRB), use the following device_args settings:
|
||||
# USRP B210: send_frame_size=512,recv_frame_size=512
|
||||
|
||||
#device_args = auto
|
||||
#time_adv_nsamples = auto
|
||||
#continuous_tx = auto
|
||||
|
||||
# Example for ZMQ-based operation with TCP transport for I/Q samples
|
||||
#device_name = zmq
|
||||
#device_args = tx_port=tcp://*:2001,rx_port=tcp://localhost:2000,id=ue,base_srate=23.04e6
|
||||
|
||||
#####################################################################
|
||||
# EUTRA RAT configuration
|
||||
#
|
||||
# dl_earfcn: Downlink EARFCN list.
|
||||
#
|
||||
# Optional parameters:
|
||||
# dl_freq: Override DL frequency corresponding to dl_earfcn
|
||||
# ul_freq: Override UL frequency corresponding to dl_earfcn
|
||||
# nof_carriers: Number of carriers
|
||||
#####################################################################
|
||||
[rat.eutra]
|
||||
dl_earfcn = 3350
|
||||
#nof_carriers = 1
|
||||
|
||||
#####################################################################
|
||||
# NR RAT configuration
|
||||
#
|
||||
# Optional parameters:
|
||||
# bands: List of support NR bands seperated by a comma (default 78)
|
||||
# nof_carriers: Number of NR carriers (must be at least 1 for NR support)
|
||||
#####################################################################
|
||||
[rat.nr]
|
||||
# bands = 78
|
||||
# nof_carriers = 0
|
||||
|
||||
#####################################################################
|
||||
# Packet capture configuration
|
||||
#
|
||||
# Packet capture is supported at the MAC, MAC_NR, and NAS layer.
|
||||
# MAC-layer packets are captured to file a the compact format decoded
|
||||
# by the Wireshark. For decoding, use the UDP dissector and the UDP
|
||||
# heuristic dissection. Edit the preferences (Edit > Preferences >
|
||||
# Protocols > DLT_USER) for DLT_USER to add an entry for DLT=149 with
|
||||
# Protocol=udp. Further, enable the heuristic dissection in UDP under:
|
||||
# Analyze > Enabled Protocols > MAC-LTE > mac_lte_udp and MAC-NR > mac_nr_udp
|
||||
# For more information see: https://wiki.wireshark.org/MAC-LTE
|
||||
# Using the same filename for mac_filename and mac_nr_filename writes both
|
||||
# MAC-LTE and MAC-NR to the same file allowing a better analysis.
|
||||
# NAS-layer packets are dissected with DLT=148, and Protocol = nas-eps.
|
||||
#
|
||||
# enable: Enable packet captures of layers (mac/mac_nr/nas/none) multiple option list
|
||||
# mac_filename: File path to use for MAC packet capture
|
||||
# mac_nr_filename: File path to use for MAC NR packet capture
|
||||
# nas_filename: File path to use for NAS packet capture
|
||||
#####################################################################
|
||||
[pcap]
|
||||
enable = none
|
||||
mac_filename = /tmp/ue_mac.pcap
|
||||
mac_nr_filename = /tmp/ue_mac_nr.pcap
|
||||
nas_filename = /tmp/ue_nas.pcap
|
||||
|
||||
#####################################################################
|
||||
# Log configuration
|
||||
#
|
||||
# Log levels can be set for individual layers. "all_level" sets log
|
||||
# level for all layers unless otherwise configured.
|
||||
# Format: e.g. phy_level = info
|
||||
#
|
||||
# In the same way, packet hex dumps can be limited for each level.
|
||||
# "all_hex_limit" sets the hex limit for all layers unless otherwise
|
||||
# configured.
|
||||
# Format: e.g. phy_hex_limit = 32
|
||||
#
|
||||
# Logging layers: rf, phy, mac, rlc, pdcp, rrc, nas, gw, usim, stack, all
|
||||
# Logging levels: debug, info, warning, error, none
|
||||
#
|
||||
# filename: File path to use for log output. Can be set to stdout
|
||||
# to print logs to standard output
|
||||
# file_max_size: Maximum file size (in kilobytes). When passed, multiple files are created.
|
||||
# If set to negative, a single log file will be created.
|
||||
#####################################################################
|
||||
[log]
|
||||
all_level = warning
|
||||
phy_lib_level = none
|
||||
all_hex_limit = 32
|
||||
filename = /tmp/ue.log
|
||||
file_max_size = -1
|
||||
|
||||
#####################################################################
|
||||
# USIM configuration
|
||||
#
|
||||
# mode: USIM mode (soft/pcsc)
|
||||
# algo: Authentication algorithm (xor/milenage)
|
||||
# op/opc: 128-bit Operator Variant Algorithm Configuration Field (hex)
|
||||
# - Specify either op or opc (only used in milenage)
|
||||
# k: 128-bit subscriber key (hex)
|
||||
# imsi: 15 digit International Mobile Subscriber Identity
|
||||
# imei: 15 digit International Mobile Station Equipment Identity
|
||||
# pin: PIN in case real SIM card is used
|
||||
# reader: Specify card reader by it's name as listed by 'pcsc_scan'. If empty, try all available readers.
|
||||
#####################################################################
|
||||
[usim]
|
||||
mode = soft
|
||||
algo = xor
|
||||
#opc = 63BFA50EE6523365FF14C1F45F88737D
|
||||
k = 00112233445566778899aabbccddeeff
|
||||
imsi = 001010123456789
|
||||
imei = 353490069873319
|
||||
#reader =
|
||||
#pin = 1234
|
||||
|
||||
#####################################################################
|
||||
# RRC configuration
|
||||
#
|
||||
# ue_category: Sets UE category (range 1-5). Default: 4
|
||||
# release: UE Release (8 to 15)
|
||||
# feature_group: Hex value of the featureGroupIndicators field in the
|
||||
# UECapabilityInformation message. Default 0xe6041000
|
||||
# mbms_service_id: MBMS service id for autostarting MBMS reception
|
||||
# (default -1 means disabled)
|
||||
# mbms_service_port: Port of the MBMS service
|
||||
# nr_measurement_pci: NR PCI for the simulated NR measurement. Default: 500
|
||||
# nr_short_sn_support: Announce PDCP short SN support. Default: true
|
||||
#####################################################################
|
||||
[rrc]
|
||||
#ue_category = 4
|
||||
#release = 15
|
||||
#feature_group = 0xe6041000
|
||||
#mbms_service_id = -1
|
||||
#mbms_service_port = 4321
|
||||
|
||||
#####################################################################
|
||||
# NAS configuration
|
||||
#
|
||||
# apn: Set Access Point Name (APN)
|
||||
# apn_protocol: Set APN protocol (IPv4, IPv6 or IPv4v6.)
|
||||
# user: Username for CHAP authentication
|
||||
# pass: Password for CHAP authentication
|
||||
# force_imsi_attach: Whether to always perform an IMSI attach
|
||||
# eia: List of integrity algorithms included in UE capabilities
|
||||
# Supported: 1 - Snow3G, 2 - AES
|
||||
# eea: List of ciphering algorithms included in UE capabilities
|
||||
# Supported: 0 - NULL, 1 - Snow3G, 2 - AES
|
||||
#####################################################################
|
||||
[nas]
|
||||
#apn = internetinternet
|
||||
#apn_protocol = ipv4
|
||||
#user = srsuser
|
||||
#pass = srspass
|
||||
#force_imsi_attach = false
|
||||
#eia = 1,2
|
||||
#eea = 0,1,2
|
||||
|
||||
#####################################################################
|
||||
# GW configuration
|
||||
#
|
||||
# netns: Network namespace to create TUN device. Default: empty
|
||||
# ip_devname: Name of the tun_srsue device. Default: tun_srsue
|
||||
# ip_netmask: Netmask of the tun_srsue device. Default: 255.255.255.0
|
||||
#####################################################################
|
||||
[gw]
|
||||
#netns =
|
||||
#ip_devname = tun_srsue
|
||||
#ip_netmask = 255.255.255.0
|
||||
|
||||
#####################################################################
|
||||
# GUI configuration
|
||||
#
|
||||
# Simple GUI displaying PDSCH constellation and channel freq response.
|
||||
# (Requires building with srsGUI)
|
||||
# enable: Enable the graphical interface (true/false)
|
||||
#####################################################################
|
||||
[gui]
|
||||
enable = false
|
||||
|
||||
#####################################################################
|
||||
# Channel emulator options:
|
||||
# enable: Enable/Disable internal Downlink/Uplink channel emulator
|
||||
#
|
||||
# -- AWGN Generator
|
||||
# awgn.enable: Enable/disable AWGN generator
|
||||
# awgn.snr: SNR in dB
|
||||
# awgn.signal_power: Received signal power in decibels full scale (dBfs)
|
||||
#
|
||||
# -- Fading emulator
|
||||
# fading.enable: Enable/disable fading simulator
|
||||
# fading.model: Fading model + maximum doppler (E.g. none, epa5, eva70, etu300, etc)
|
||||
#
|
||||
# -- Delay Emulator delay(t) = delay_min + (delay_max - delay_min) * (1 + sin(2pi*t/period)) / 2
|
||||
# Maximum speed [m/s]: (delay_max - delay_min) * pi * 300 / period
|
||||
# delay.enable: Enable/disable delay simulator
|
||||
# delay.period_s: Delay period in seconds.
|
||||
# delay.init_time_s: Delay initial time in seconds.
|
||||
# delay.maximum_us: Maximum delay in microseconds
|
||||
# delay.minumum_us: Minimum delay in microseconds
|
||||
#
|
||||
# -- Radio-Link Failure (RLF) Emulator
|
||||
# rlf.enable: Enable/disable RLF simulator
|
||||
# rlf.t_on_ms: Time for On state of the channel (ms)
|
||||
# rlf.t_off_ms: Time for Off state of the channel (ms)
|
||||
#
|
||||
# -- High Speed Train Doppler model simulator
|
||||
# hst.enable: Enable/Disable HST simulator
|
||||
# hst.period_s: HST simulation period in seconds
|
||||
# hst.fd_hz: Doppler frequency in Hz
|
||||
# hst.init_time_s: Initial time in seconds
|
||||
#####################################################################
|
||||
[channel.dl]
|
||||
#enable = false
|
||||
|
||||
[channel.dl.awgn]
|
||||
#enable = false
|
||||
#snr = 30
|
||||
|
||||
[channel.dl.fading]
|
||||
#enable = false
|
||||
#model = none
|
||||
|
||||
[channel.dl.delay]
|
||||
#enable = false
|
||||
#period_s = 3600
|
||||
#init_time_s = 0
|
||||
#maximum_us = 100
|
||||
#minimum_us = 10
|
||||
|
||||
[channel.dl.rlf]
|
||||
#enable = false
|
||||
#t_on_ms = 10000
|
||||
#t_off_ms = 2000
|
||||
|
||||
[channel.dl.hst]
|
||||
#enable = false
|
||||
#period_s = 7.2
|
||||
#fd_hz = 750.0
|
||||
#init_time_s = 0.0
|
||||
|
||||
[channel.ul]
|
||||
#enable = false
|
||||
|
||||
[channel.ul.awgn]
|
||||
#enable = false
|
||||
#n0 = -30
|
||||
|
||||
[channel.ul.fading]
|
||||
#enable = false
|
||||
#model = none
|
||||
|
||||
[channel.ul.delay]
|
||||
#enable = false
|
||||
#period_s = 3600
|
||||
#init_time_s = 0
|
||||
#maximum_us = 100
|
||||
#minimum_us = 10
|
||||
|
||||
[channel.ul.rlf]
|
||||
#enable = false
|
||||
#t_on_ms = 10000
|
||||
#t_off_ms = 2000
|
||||
|
||||
[channel.ul.hst]
|
||||
#enable = false
|
||||
#period_s = 7.2
|
||||
#fd_hz = -750.0
|
||||
#init_time_s = 0.0
|
||||
|
||||
#####################################################################
|
||||
# PHY configuration options
|
||||
#
|
||||
# rx_gain_offset: RX Gain offset to add to rx_gain to calibrate RSRP readings
|
||||
# prach_gain: PRACH gain (dB). If defined, forces a gain for the tranmsission of PRACH only.,
|
||||
# Default is to use tx_gain in [rf] section.
|
||||
# cqi_max: Upper bound on the maximum CQI to be reported. Default 15.
|
||||
# cqi_fixed: Fixes the reported CQI to a constant value. Default disabled.
|
||||
# snr_ema_coeff: Sets the SNR exponential moving average coefficient (Default 0.1)
|
||||
# snr_estim_alg: Sets the noise estimation algorithm. (Default refs)
|
||||
# Options: pss: use difference between received and known pss signal,
|
||||
# refs: use difference between noise references and noiseless (after filtering)
|
||||
# empty: use empty subcarriers in the boarder of pss/sss signal
|
||||
# pdsch_max_its: Maximum number of turbo decoder iterations (Default 4)
|
||||
# pdsch_meas_evm: Measure PDSCH EVM, increases CPU load (default false)
|
||||
# nof_phy_threads: Selects the number of PHY threads (maximum 4, minimum 1, default 3)
|
||||
# equalizer_mode: Selects equalizer mode. Valid modes are: "mmse", "zf" or any
|
||||
# non-negative real number to indicate a regularized zf coefficient.
|
||||
# Default is MMSE.
|
||||
# correct_sync_error: Channel estimator measures and pre-compensates time synchronization error. Increases CPU usage,
|
||||
# improves PDSCH decoding in high SFO and high speed UE scenarios.
|
||||
# sfo_ema: EMA coefficient to average sample offsets used to compute SFO
|
||||
# sfo_correct_period: Period in ms to correct sample time to adjust for SFO
|
||||
# sss_algorithm: Selects the SSS estimation algorithm. Can choose between
|
||||
# {full, partial, diff}.
|
||||
# estimator_fil_auto: The channel estimator smooths the channel estimate with an adaptative filter.
|
||||
# estimator_fil_stddev: Sets the channel estimator smooth gaussian filter standard deviation.
|
||||
# estimator_fil_order: Sets the channel estimator smooth gaussian filter order (even values perform better).
|
||||
# The taps are [w, 1-2w, w]
|
||||
#
|
||||
# snr_to_cqi_offset: Sets an offset in the SNR to CQI table. This is used to adjust the reported CQI.
|
||||
#
|
||||
# interpolate_subframe_enabled: Interpolates in the time domain the channel estimates within 1 subframe. Default is to average.
|
||||
#
|
||||
# pdsch_csi_enabled: Stores the Channel State Information and uses it for weightening the softbits. It is only
|
||||
# used in TM1. It is True by default.
|
||||
#
|
||||
# pdsch_8bit_decoder: Use 8-bit for LLR representation and turbo decoder trellis computation (Experimental)
|
||||
# force_ul_amplitude: Forces the peak amplitude in the PUCCH, PUSCH and SRS (set 0.0 to 1.0, set to 0 or negative for disabling)
|
||||
#
|
||||
# in_sync_rsrp_dbm_th: RSRP threshold (in dBm) above which the UE considers to be in-sync
|
||||
# in_sync_snr_db_th: SNR threshold (in dB) above which the UE considers to be in-sync
|
||||
# nof_in_sync_events: Number of PHY in-sync events before sending an in-sync event to RRC
|
||||
# nof_out_of_sync_events: Number of PHY out-sync events before sending an out-sync event to RRC
|
||||
#
|
||||
#####################################################################
|
||||
[phy]
|
||||
#rx_gain_offset = 62
|
||||
#prach_gain = 30
|
||||
#cqi_max = 15
|
||||
#cqi_fixed = 10
|
||||
#snr_ema_coeff = 0.1
|
||||
#snr_estim_alg = refs
|
||||
#pdsch_max_its = 8 # These are half iterations
|
||||
#pdsch_meas_evm = false
|
||||
#nof_phy_threads = 3
|
||||
#equalizer_mode = mmse
|
||||
#correct_sync_error = false
|
||||
#sfo_ema = 0.1
|
||||
#sfo_correct_period = 10
|
||||
#sss_algorithm = full
|
||||
#estimator_fil_auto = false
|
||||
#estimator_fil_stddev = 1.0
|
||||
#estimator_fil_order = 4
|
||||
#snr_to_cqi_offset = 0.0
|
||||
#interpolate_subframe_enabled = false
|
||||
#pdsch_csi_enabled = true
|
||||
#pdsch_8bit_decoder = false
|
||||
#force_ul_amplitude = 0
|
||||
|
||||
#in_sync_rsrp_dbm_th = -130.0
|
||||
#in_sync_snr_db_th = 3.0
|
||||
#nof_in_sync_events = 10
|
||||
#nof_out_of_sync_events = 20
|
||||
|
||||
#####################################################################
|
||||
# Simulation configuration options
|
||||
#
|
||||
# The UE simulation supports turning on and off airplane mode in the UE.
|
||||
# The actions are carried periodically until the UE is stopped.
|
||||
#
|
||||
# airplane_t_on_ms: Time to leave airplane mode turned on (in ms)
|
||||
#
|
||||
# airplane_t_off_ms: Time to leave airplane mode turned off (in ms)
|
||||
#
|
||||
#####################################################################
|
||||
[sim]
|
||||
#airplane_t_on_ms = -1
|
||||
#airplane_t_off_ms = -1
|
||||
|
||||
#####################################################################
|
||||
# General configuration options
|
||||
#
|
||||
# metrics_csv_enable: Write UE metrics to CSV file.
|
||||
#
|
||||
# metrics_period_secs: Sets the period at which metrics are requested from the UE.
|
||||
#
|
||||
# metrics_csv_filename: File path to use for CSV metrics.
|
||||
#
|
||||
# tracing_enable: Write source code tracing information to a file.
|
||||
#
|
||||
# tracing_filename: File path to use for tracing information.
|
||||
#
|
||||
# tracing_buffcapacity: Maximum capacity in bytes the tracing framework can store.
|
||||
#
|
||||
# have_tti_time_stats: Calculate TTI execution statistics using system clock
|
||||
#
|
||||
#####################################################################
|
||||
[general]
|
||||
#metrics_csv_enable = false
|
||||
#metrics_period_secs = 1
|
||||
#metrics_csv_filename = /tmp/ue_metrics.csv
|
||||
#have_tti_time_stats = true
|
||||
#tracing_enable = true
|
||||
#tracing_filename = /tmp/ue_tracing.log
|
||||
#tracing_buffcapacity = 1000000
|
||||
@@ -1,21 +0,0 @@
|
||||
#
|
||||
# .csv to store UE's information in HSS
|
||||
# Kept in the following format: "Name,Auth,IMSI,Key,OP_Type,OP/OPc,AMF,SQN,QCI,IP_alloc"
|
||||
#
|
||||
# Name: Human readable name to help distinguish UE's. Ignored by the HSS
|
||||
# Auth: Authentication algorithm used by the UE. Valid algorithms are XOR
|
||||
# (xor) and MILENAGE (mil)
|
||||
# IMSI: UE's IMSI value
|
||||
# Key: UE's key, where other keys are derived from. Stored in hexadecimal
|
||||
# OP_Type: Operator's code type, either OP or OPc
|
||||
# OP/OPc: Operator Code/Cyphered Operator Code, stored in hexadecimal
|
||||
# AMF: Authentication management field, stored in hexadecimal
|
||||
# SQN: UE's Sequence number for freshness of the authentication
|
||||
# QCI: QoS Class Identifier for the UE's default bearer.
|
||||
# IP_alloc: IP allocation stratagy for the SPGW.
|
||||
# With 'dynamic' the SPGW will automatically allocate IPs
|
||||
# With a valid IPv4 (e.g. '172.16.0.2') the UE will have a statically assigned IP.
|
||||
#
|
||||
# Note: Lines starting by '#' are ignored and will be overwritten
|
||||
ue1,xor,001010123456789,00112233445566778899aabbccddeeff,opc,63bfa50ee6523365ff14c1f45f88737d,9001,000000001234,7,dynamic
|
||||
ue2,mil,001010123456780,00112233445566778899aabbccddeeff,opc,63bfa50ee6523365ff14c1f45f88737d,8000,000000001234,7,dynamic
|
||||
|
Can't render this file because it contains an unexpected character in line 3 and column 33.
|
Reference in New Issue
Block a user