50 lines
4.1 KiB
YAML
50 lines
4.1 KiB
YAML
cu_cp:
|
|
amf:
|
|
addr: AMF_IP # The address or hostname of the AMF.
|
|
bind_addr: SRS_GNB_IP # A local IP that the gNB binds to for traffic from the AMF.
|
|
supported_tracking_areas: # Sets the list of tracking areas supported by this AMF.
|
|
- tac: 1 # Tracking area code (needs to match the core configuration).
|
|
plmn_list: # The list of PLMN items supported for this Tracking Area.
|
|
- plmn: "PLMN" # PLMN broadcasted by the gNB.
|
|
tai_slice_support_list: # The list of TAI slices for this PLMN item.
|
|
- sst: 1 # Sets the Slice Service Type.
|
|
|
|
ru_sdr:
|
|
device_driver: uhd # The RF driver name.
|
|
device_args: type=b200,num_recv_frames=64,num_send_frames=64 # Optionally pass arguments to the selected RF driver.
|
|
clock: # Specify the clock source used by the RF.
|
|
sync: # Specify the sync source used by the RF.
|
|
srate: 23.04 # RF sample rate might need to be adjusted according to selected bandwidth.
|
|
otw_format: sc12
|
|
tx_gain: 80 # Transmit gain of the RF might need to adjusted to the given situation.
|
|
rx_gain: 40 # Receive gain of the RF might need to adjusted to the given situation.
|
|
|
|
cell_cfg:
|
|
dl_arfcn: 632628 # ARFCN of the downlink carrier (center frequency).
|
|
band: 78 # The NR band.
|
|
channel_bandwidth_MHz: 20 # Bandwith in MHz. Number of PRBs will be automatically derived.
|
|
common_scs: 30 # Subcarrier spacing in kHz used for data.
|
|
plmn: "PLMN" # PLMN broadcasted by the gNB.
|
|
tac: 1 # Tracking area code (needs to match the core configuration).
|
|
pci: 1 # Physical cell ID.
|
|
|
|
log:
|
|
filename: /mnt/srsran/gnb.log # Path of the log file.
|
|
all_level: warning # Logging level applied to all layers.
|
|
|
|
pcap:
|
|
mac_enable: false # Set to true to enable MAC-layer PCAPs.
|
|
mac_filename: /mnt/srsran/gnb_mac.pcap # Path where the MAC PCAP is stored.
|
|
ngap_enable: false # Set to true to enable NGAP PCAPs.
|
|
ngap_filename: /mnt/srsran/gnb_ngap.pcap # Path where the NGAP PCAP is stored.
|
|
f1ap_enable: false # Set to true to enable F1AP PCAPs.
|
|
f1ap_filename: /mnt/srsran/gnb_f1ap.pcap # Path where the F1AP PCAP is stored.
|
|
e1ap_enable: false # Set to true to enable E1AP PCAPs.
|
|
e1ap_filename: /mnt/srsran/gnb_e1ap.pcap # Path where the E1AP PCAP is stored.
|
|
e2ap_enable: false # Set to true to enable E2AP PCAPs.
|
|
e2ap_cu_cp_filename: /mnt/srsran/cu_cp_e2ap.pcap # Path where E2AP CU-CP PCAP is stored.
|
|
e2ap_cu_up_filename: /mnt/srsran/cu_up_e2ap.pcap # Path where E2AP CU-UP PCAP is stored.
|
|
e2ap_du_filename: /mnt/srsran/du_e2ap.pcap # Path where E2AP CU PCAP is stored.
|
|
n3_enable: false # Set to true to enable N3 PCAPs.
|
|
n3_filename: /mnt/srsran/gnb_n3.pcap # Path where the N3 PCAP is stored.
|