47 lines
4.1 KiB
YAML
47 lines
4.1 KiB
YAML
amf:
|
|
addr: AMF_IP # The address or hostname of the AMF.
|
|
bind_addr: SRS_GNB_IP # A local IP that the gNB binds to for traffic from the AMF.
|
|
|
|
ru_sdr:
|
|
device_driver: zmq # The RF driver name.
|
|
device_args: tx_port=tcp://SRS_GNB_IP:2000,rx_port=tcp://SRS_UE_IP:2001,base_srate=23.04e6 # Optionally pass arguments to the selected RF driver.
|
|
srate: 23.04 # RF sample rate might need to be adjusted according to selected bandwidth.
|
|
tx_gain: 75 # Transmit gain of the RF might need to adjusted to the given situation.
|
|
rx_gain: 75 # Receive gain of the RF might need to adjusted to the given situation.
|
|
|
|
cell_cfg:
|
|
dl_arfcn: 368500 # ARFCN of the downlink carrier (center frequency).
|
|
band: 3 # The NR band.
|
|
channel_bandwidth_MHz: 20 # Bandwith in MHz. Number of PRBs will be automatically derived.
|
|
common_scs: 15 # Subcarrier spacing in kHz used for data.
|
|
plmn: "PLMN" # PLMN broadcasted by the gNB.
|
|
tac: 1 # Tracking area code (needs to match the core configuration).
|
|
pci: 1 # Physical cell ID.
|
|
pdcch:
|
|
dedicated:
|
|
ss2_type: common # Search Space type, has to be set to common
|
|
dci_format_0_1_and_1_1: false # Set correct DCI format (fallback)
|
|
common:
|
|
ss0_index: 0
|
|
coreset0_index: 13
|
|
prach:
|
|
prach_config_index: 1
|
|
|
|
log:
|
|
filename: /mnt/srsran/gnb.log # Path of the log file.
|
|
all_level: warning # Logging level applied to all layers.
|
|
|
|
pcap:
|
|
mac_enable: false # Set to true to enable MAC-layer PCAPs.
|
|
mac_filename: /mnt/srsran/gnb_mac.pcap # Path where the MAC PCAP is stored.
|
|
ngap_enable: false # Set to true to enable NGAP PCAPs.
|
|
ngap_filename: /mnt/srsran/gnb_ngap.pcap # Path where the NGAP PCAP is stored.
|
|
f1ap_enable: false # Set to true to enable F1AP PCAPs.
|
|
f1ap_filename: /mnt/srsran/gnb_f1ap.pcap # Path where the F1AP PCAP is stored.
|
|
e1ap_enable: false # Set to true to enable E1AP PCAPs.
|
|
e1ap_filename: /mnt/srsran/gnb_e1ap.pcap # Path where the E1AP PCAP is stored.
|
|
e2ap_enable: false # Set to true to enable E2AP PCAPs.
|
|
e2ap_filename: /mnt/srsran/gnb_e2ap.pcap # Path where the E2AP PCAP is stored.
|
|
n3_enable: false # Set to true to enable N3 PCAPs.
|
|
n3_filename: /mnt/srsran/gnb_n3.pcap # Path where the N3 PCAP is stored.
|