This feature can be used for provisioning a limit on the size of the packets
sent by the MS to avoid packet fragmentation in the backbone network between
the MS and the GGSN/PGW and/or across the (S)Gi reference point) when some
of the backbone links does not support packets larger then 1500 octets
(ETSI TS 123 060 V15.5.0 Annex C)
Example of pgw.yaml to use this feature:
logger:
file: @localstatedir@/log/open5gs/pgw.log
parameter:
pgw:
freeDiameter: @sysconfdir@/freeDiameter/pgw.conf
gtpc:
- addr: 127.0.0.3
- addr: ::1
gtpu:
- addr: 127.0.0.3
- addr: ::1
ue_pool:
- addr: 10.45.0.1/16
- addr: cafe::1/64
dns:
- 8.8.8.8
- 8.8.4.4
- 2001:4860:4860::8888
- 2001:4860:4860::8844
mtu: 1400
This feature is useful in scenarios where SGW is run inside in a container or openstack vm i.e. behind 1-to-1 mapping NAT.
In docker/openstack environment, we often have 1-to-1 mapped NAT IP address in order for eNB to reach SGW.
But, this 1-to-1 mapping NAT IP address is not seen on SGW host and hence non UDP socket bindable.
Since SGW can only bind to IP address visible in it's host (usually a private IP beind a NAT),
it advertises the same to UE in S1AP message resulting in eNB not able to reach SGW on Uplink. This commit solves this issue
by providing a means to advertise a different IP address than the one SGW UDP socket is bound to.
Example of sgw.yaml to use this feature:
logger:
file: /root/open5gs/install/var/log/open5gs/sgw.log
level: debug
parameter:
no_ipv6: true
sgw:
gtpc:
addr: 127.0.0.2
gtpu:
dev: ens3
advertise_addr:
- 172.24.15.30
- fe80::f816:3eff:fe15:fe34
* Updated the docs for setting up a working VoLTE testbed
* Fixed docs formatting
* More formatting fixes of doc
* Handling NAS Bearer Resource Modification Request to prevent crashing of mme
* Corrected tutorial with right APN settings required in Mongo DB for VoLTE UE
* Added more steps to enable calling using only USIM
* More changes to VoLTE document based on working setup
* Updated guide with link to a safe and better way to force enable VoLTE on phones
* initial commit: respond with ESM Cause PDN-Type if we only allow IPv4 or IPv6 (not both)
* works as intended, removing debug statement.
* Fix the indentation and add the reference
Co-authored-by: Sukchan Lee <acetcom@gmail.com>
