When the UE sends a Tracking Area Update (TAU) Request with active_flag=0,
the MME previously sent TAU Accept without verifying the EPS Bearer Context
Status (EBCS). This caused stale bearer sessions to remain in the MME even
if the UE had already released them.
According to 3GPP TS 24.301 §5.5.3.2, the MME should release any bearer
not reported in the UE’s EBCS when active_flag=0. This patch introduces
mme_send_delete_session_or_tau_accept(), which compares the UE’s EBCS bitmask
with the MME session list and deletes any missing default bearer session
before sending TAU Accept.
If no mismatch is found, TAU Accept is sent immediately. The Delete Session
response triggers TAU Accept when deletions are required. This ensures that
the TAU Accept message reflects the UE’s current bearer context accurately.
Also includes:
- Added OGS_GTP_DELETE_SEND_TAU_ACCEPT handling in mme-s11-handler.c
- Simplified EBCS structure (uint16_t value) for bitmask comparison
- Updated TAU-related tests with realistic EBI bitmasks (0x20, 0x60)
This change aligns TAU handling with 3GPP 24.301 and prevents bearer
mismatch issues between UE and EPC during TAU.
If the UE continuously attempts to Attach while changing PDN Type,
it will cause the wrong IP to be assigned.
(e.g PDU-Type : IPv4v6 -> IPv4 -> IPv4v6)
This is because we use two variables at the same time,
one to read and store the Static IP from the Subscriber DB and
one to store the IP assigned from SMF, called session->paa.
When the UE attaches with PDN-Type set to IPv4v6,
MME saves the allocated IP in session->paa.
However, MME thinks it has been assigned a static IP based on the information
in session->paa, so changing the PDN-Type may result in the wrong IP
being assigned.
To solve this problem, I separated the variable(session->paa) that stores
the allocated IP received from SMF and the variable(session->ue_ip) that stores
the Static IP read from the Subscriber DB.
Therefore, the information read from the Subscriber DB
(session->session_type and session->ue_ip) should not be modified.
First of all, it crashes when creating a Dedicated Bearer
on the default Session that is created for the first time.
This behavior should be possible, so the related ASSERT is removed.
Next, the InitialContextRequest is modified
during the Attach Request to include the first Bearer.
Finally, there was an issue where trying to create a Dedicated Bearer
with SGsAP enabled resulted in an InitialContextSetupRequest message
with a PTI of zero. This is because MME initializes the PTI to 0
upon receiving the Create Bearer Request while processing SGsAP.
All of these issues has been fixed.
* [AMF/MME] UEContextReleaseCommand in Integrity (#2786)
Modified not to send UEContextReleaseCommand in Integrity Unprotected
NAS message such like Registration or Service request.
* [AMF/MME] UEContextReleaseCommand after Interity Protected (#2786)
Modified not to send UEContextReleaseCommand in Integrity Unprotected
NAS message such like Registration or Service request.
o Generate the private key as below.
$ openssl genpkey -algorithm X25519 -out /etc/open5gs/hnet/curve25519-1.key
$ openssl ecparam -name prime256v1 -genkey -conv_form compressed -out /etc/open5gs/hnet/secp256r1-2.key
o The private and public keys can be viewed with the command.
The public key is used when creating the SIM.
$ openssl pkey -in /etc/open5gs/hnet/curve25519-1.key -text
$ openssl ec -in /etc/open5gs/hnet/secp256r1-2.key -conv_form compressed -text
In ausf/udm.yaml
hnet:
o Home network public key identifier(PKI) value : 1
Protection scheme identifier : ECIES scheme profile A
- id: 1
scheme: 1
key: /etc/open5gs/hnet/curve25519-1.key
o Home network public key identifier(PKI) value : 2
Protection scheme identifier : ECIES scheme profile B
- id: 2
scheme: 2
key: /etc/open5gs/hnet/secp256r1-2.key
o Home network public key identifier(PKI) value : 3
Protection scheme identifier : ECIES scheme profile A
- id: 3
scheme: 1
key: /etc/open5gs/hnet/curve25519-1.key
o Home network public key identifier(PKI) value : 4
Protection scheme identifier : ECIES scheme profile B
- id: 4
scheme: 2
key: /etc/open5gs/hnet/secp256r1-2.key
Related to #1779
In the past only GTPv2C was supported, and had the "gtp" generic prefix.
Later on, GTPv1C support was added, and "gtp1" prefix was used.
Let's move GTPv2C specific bits to have "gtp2" prefix too, and leave
"gtp" prefix for generic stuff among different GTP versions.
The AMF shall assign a new 5G-GUTI for a particular UE:
a) during a successful initial registration procedure;
b) during a successful registration procedure
for mobility registration update; and
c) after a successful service request procedure invoked as a response
to a paging request from the network and before the release
of the N1 NAS signalling connection as specified in subclause 5.4.4.1.
The AMF should assign a new 5G-GUTI for a particular UE
during a successful registration procedure
for periodic registration update. The AMF may assign a new 5G-GUTI
at any time for a particular UE by performing
the generic UE configuration update procedure.
If both Delete-Session-Request/Response and
UEContextReleaseCommand/UEContextReleaseComplete are failed at the same time,
UE cannot attach to the EPC infinitely.
So, I've add the protection code
if timer expires when MME does not receive Delete-Session-Response.
