Release v2.4.1

- Change memory pool using talloc library
- Apply ASN1 with r16.7.0

.github/FUNDING.yml

@@ -0,0 +1,13 @@
+# These are supported funding model platforms
+
+#github: [acetcom, open5gs]
+github: acetcom
+#patreon: # Replace with a single Patreon username
+open_collective: open5gs
+#ko_fi: # Replace with a single Ko-fi username
+#tidelift: # Replace with a single Tidelift platform-name/package-name e.g., npm/babel
+#community_bridge: # Replace with a single Community Bridge project-name e.g., cloud-foundry
+#liberapay: # Replace with a single Liberapay username
+#issuehunt: # Replace with a single IssueHunt username
+#otechie: # Replace with a single Otechie username
+#custom: # Replace with up to 4 custom sponsorship URLs e.g., ['link1', 'link2']

.github/stale.yml

@@ -0,0 +1,61 @@
+# Configuration for probot-stale - https://github.com/probot/stale
+
+# Number of days of inactivity before an Issue or Pull Request becomes stale
+daysUntilStale: 180
+
+# Number of days of inactivity before an Issue or Pull Request with the stale label is closed.
+# Set to false to disable. If disabled, issues still need to be closed manually, but will remain marked as stale.
+daysUntilClose: 7
+
+# Only issues or pull requests with all of these labels are check if stale. Defaults to `[]` (disabled)
+onlyLabels: []
+
+# Issues or Pull Requests with these labels will never be considered stale. Set to `[]` to disable
+exemptLabels:
+  - pinned
+  - security
+  - "[Status] Maybe Later"
+
+# Set to true to ignore issues in a project (defaults to false)
+exemptProjects: false
+
+# Set to true to ignore issues in a milestone (defaults to false)
+exemptMilestones: false
+
+# Set to true to ignore issues with an assignee (defaults to false)
+exemptAssignees: false
+
+# Label to use when marking as stale
+staleLabel: wontfix
+
+# Comment to post when marking as stale. Set to `false` to disable
+markComment: >
+  This issue/PR has been automatically marked as stale because it has not had
+  recent activity for 180 days. It will be closed if no further activity
+  occurs in 7 dayss. Thank you for your contributions!
+
+# Comment to post when removing the stale label.
+# unmarkComment: >
+#   Your comment here.
+
+# Comment to post when closing a stale Issue or Pull Request.
+# closeComment: >
+#   Your comment here.
+
+# Limit the number of actions per hour, from 1-30. Default is 30
+limitPerRun: 30
+
+# Limit to only `issues` or `pulls`
+# only: issues
+
+# Optionally, specify configuration settings that are specific to just 'issues' or 'pulls':
+# pulls:
+#   daysUntilStale: 30
+#   markComment: >
+#     This pull request has been automatically marked as stale because it has not had
+#     recent activity. It will be closed if no further activity occurs. Thank you
+#     for your contributions.
+
+# issues:
+#   exemptLabels:
+#     - confirmed

.gitignore

@@ -0,0 +1,5 @@
+# This directory is fetched during first build and is present in this directory
+subprojects/freeDiameter
+subprojects/usrsctp
+
+webui/.next

LICENSE

@@ -1,5 +1,5 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
+                    GNU AFFERO GENERAL PUBLIC LICENSE
+                       Version 3, 19 November 2007
 
  Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
@@ -7,17 +7,15 @@
 
                             Preamble
 
-  The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
+  The GNU Affero General Public License is a free, copyleft license for
+software and other kinds of works, specifically designed to ensure
+cooperation with the community in the case of network server software.
 
   The licenses for most software and other practical works are designed
 to take away your freedom to share and change the works.  By contrast,
-the GNU General Public License is intended to guarantee your freedom to
+our General Public Licenses are intended to guarantee your freedom to
 share and change all versions of a program--to make sure it remains free
-software for all its users.  We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors.  You can apply it to
-your programs, too.
+software for all its users.
 
   When we speak of free software, we are referring to freedom, not
 price.  Our General Public Licenses are designed to make sure that you
@@ -26,44 +24,34 @@ them if you wish), that you receive source code or can get it if you
 want it, that you can change the software or use pieces of it in new
 free programs, and that you know you can do these things.
 
-  To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights.  Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
+  Developers that use our General Public Licenses protect your rights
+with two steps: (1) assert copyright on the software, and (2) offer
+you this License which gives you legal permission to copy, distribute
+and/or modify the software.
 
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received.  You must make sure that they, too, receive
-or can get the source code.  And you must show them these terms so they
-know their rights.
+  A secondary benefit of defending all users' freedom is that
+improvements made in alternate versions of the program, if they
+receive widespread use, become available for other developers to
+incorporate.  Many developers of free software are heartened and
+encouraged by the resulting cooperation.  However, in the case of
+software used on network servers, this result may fail to come about.
+The GNU General Public License permits making a modified version and
+letting the public access it on a server without ever releasing its
+source code to the public.
 
-  Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
+  The GNU Affero General Public License is designed specifically to
+ensure that, in such cases, the modified source code becomes available
+to the community.  It requires the operator of a network server to
+provide the source code of the modified version running there to the
+users of that server.  Therefore, public use of a modified version, on
+a publicly accessible server, gives the public access to the source
+code of the modified version.
 
-  For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software.  For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
-  Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so.  This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software.  The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable.  Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products.  If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
-  Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary.  To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
+  An older license, called the Affero General Public License and
+published by Affero, was designed to accomplish similar goals.  This is
+a different license, not a version of the Affero GPL, but Affero has
+released a new version of the Affero GPL which permits relicensing under
+this license.
 
   The precise terms and conditions for copying, distribution and
 modification follow.
@@ -72,7 +60,7 @@ modification follow.
 
   0. Definitions.
 
-  "This License" refers to version 3 of the GNU General Public License.
+  "This License" refers to version 3 of the GNU Affero General Public License.
 
   "Copyright" also means copyright-like laws that apply to other kinds of
 works, such as semiconductor masks.
@@ -549,35 +537,45 @@ to collect a royalty for further conveying from those to whom you convey
 the Program, the only way you could satisfy both those terms and this
 License would be to refrain entirely from conveying the Program.
 
-  13. Use with the GNU Affero General Public License.
+  13. Remote Network Interaction; Use with the GNU General Public License.
+
+  Notwithstanding any other provision of this License, if you modify the
+Program, your modified version must prominently offer all users
+interacting with it remotely through a computer network (if your version
+supports such interaction) an opportunity to receive the Corresponding
+Source of your version by providing access to the Corresponding Source
+from a network server at no charge, through some standard or customary
+means of facilitating copying of software.  This Corresponding Source
+shall include the Corresponding Source for any work covered by version 3
+of the GNU General Public License that is incorporated pursuant to the
+following paragraph.
 
   Notwithstanding any other provision of this License, you have
 permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
+under version 3 of the GNU General Public License into a single
 combined work, and to convey the resulting work.  The terms of this
 License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
+but the work with which it is combined will remain governed by version
+3 of the GNU General Public License.
 
   14. Revised Versions of this License.
 
   The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
+the GNU Affero General Public License from time to time.  Such new versions
+will be similar in spirit to the present version, but may differ in detail to
 address new problems or concerns.
 
   Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU General
+Program specifies that a certain numbered version of the GNU Affero General
 Public License "or any later version" applies to it, you have the
 option of following the terms and conditions either of that numbered
 version or of any later version published by the Free Software
 Foundation.  If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
+GNU Affero General Public License, you may choose any version ever published
 by the Free Software Foundation.
 
   If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
+versions of the GNU Affero General Public License can be used, that proxy's
 public statement of acceptance of a version permanently authorizes you
 to choose that version for the Program.
 
@@ -631,44 +629,33 @@ to attach them to the start of each source file to most effectively
 state the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
 
-    {one line to give the program's name and a brief idea of what it does.}
-    Copyright (C) {year}  {name of author}
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
 
     This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
+    it under the terms of the GNU Affero General Public License as published by
     the Free Software Foundation, either version 3 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
+    GNU Affero General Public License for more details.
 
-    You should have received a copy of the GNU General Public License
+    You should have received a copy of the GNU Affero General Public License
     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 Also add information on how to contact you by electronic and paper mail.
 
-  If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
-    {project}  Copyright (C) {year}  {fullname}
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
+  If your software can interact with users remotely through a computer
+network, you should also make sure that it provides a way for users to
+get its source.  For example, if your program is a web application, its
+interface could display a "Source" link that leads users to an archive
+of the code.  There are many ways you could offer source, and different
+solutions will be better for different programs; see section 13 for the
+specific requirements.
 
   You should also get your employer (if you work as a programmer) or school,
 if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
+For more information on this, and how to apply and follow the GNU AGPL, see
 <http://www.gnu.org/licenses/>.
-
-  The GNU General Public License does not permit incorporating your program
-into proprietary programs.  If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.  But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.

Makefile.am

@@ -1,71 +0,0 @@
-## Process this file with automake to produce Makefile.in
-
-ACLOCAL_AMFLAGS = -I m4
-
-SUBDIRS = lib src test
-
-bin_PROGRAMS = mmed hssd sgwd pgwd pcrfd epcd
-
-dist_mmed_SOURCES = main.c 
-mmed_LDADD = $(top_srcdir)/src/libmme.la
-mmed_LDFLAGS = -export-dynamic
-
-dist_hssd_SOURCES = main.c 
-hssd_LDADD = $(top_srcdir)/src/libhss.la
-hssd_LDFLAGS = -export-dynamic
-
-dist_sgwd_SOURCES = main.c 
-sgwd_LDADD = $(top_srcdir)/src/libsgw.la
-sgwd_LDFLAGS = -export-dynamic
-
-dist_pgwd_SOURCES = main.c 
-pgwd_LDADD = $(top_srcdir)/src/libpgw.la
-pgwd_LDFLAGS = -export-dynamic
-
-dist_pcrfd_SOURCES = main.c 
-pcrfd_LDADD = $(top_srcdir)/src/libpcrf.la
-pcrfd_LDFLAGS = -export-dynamic
-
-dist_epcd_SOURCES = main.c 
-epcd_LDADD = $(top_srcdir)/src/libepc.la
-epcd_LDFLAGS = -export-dynamic
-
-AM_CPPFLAGS = \
-    -I$(top_srcdir)/lib/core/include \
-    -I$(top_srcdir)/src
-
-sysconf_DATA = \
-	support/nextepc.conf
-
-freeDiameterdir = ${prefix}/etc/freeDiameter
-freeDiameter_DATA = \
-	support/freeDiameter/mme.conf \
-	support/freeDiameter/hss.conf \
-	support/freeDiameter/pgw.conf \
-	support/freeDiameter/pcrf.conf
-dist_freeDiameter_DATA = \
-	support/freeDiameter/cacert.pem \
-	support/freeDiameter/mme.key.pem \
-	support/freeDiameter/mme.cert.pem \
-	support/freeDiameter/hss.key.pem \
-	support/freeDiameter/hss.cert.pem \
-	support/freeDiameter/pgw.key.pem \
-	support/freeDiameter/pgw.cert.pem \
-	support/freeDiameter/pcrf.key.pem \
-	support/freeDiameter/pcrf.cert.pem
-
-install-data-hook:
-	$(MKDIR_P) $(prefix)/var/log
-
-CLEANFILES = symtbl.c
-DISTCLEANFILES = $(DIST_ARCHIVES)
-MAINTAINERCLEANFILES = \
-    configure config.in \
-    aclocal.m4 m4/ltsugar.m4 m4/libtool.m4 m4/ltversion.m4 \
-    m4/lt~obsolete.m4 m4/ltoptions.m4 \
-    build-aux/ar-lib build-aux/config.guess build-aux/depcomp \
-	build-aux/ltmain.sh build-aux/test-driver build-aux/compile \
-	build-aux/config.sub build-aux/missing build-aux/install-sh \
-	.cscope.out .cscope.out.in .cscope.files .cscope.out.po \
-    Makefile.in
-MOSTLYCLEANFILES = core *.stackdump

README.md

@@ -1,267 +1,92 @@
-Building NextEPC
-================
-
-This post will guide you on how to get installed with **NextEPC**. To date, **NextEPC** has been compiled and tested on GNU/Linux distributions(Debian, Ubuntu, Fedora, OpenSUSE) and FreeBSD.
-
-We will describe this guide using **Ubuntu 16.04 LTS (Xenial)**. You'll need to install **Ubuntu** if you don't have it installed already. To get the latest Ubuntu version, please visit the official Ubuntu website: [https://www.ubuntu.com/download/](https://www.ubuntu.com/download/). 
-
-## Install the dependencies for building the source
-
-The first step is to use **apt-get** to install all depedencies.
-
-```bash
-sudo apt-get -y install git gcc flex bison make autoconf libtool pkg-config libsctp-dev libssl-dev libgnutls-dev libgcrypt-dev libmongoc-dev libbson-dev mongodb
-```
-
-## Retrieve the latest version of the source package
-
-```bash
-git clone https://github.com/acetcom/nextepc
-```
-
-## Configure the build
-
-```bash
-cd nextepc
-test -f configure || autoreconf -iv
-CFLAGS='-O2' ./configure --prefix=`pwd`/install
-```
-
-## Compiling
-
-Hopefully, once you have completed the autotools configuration, you only need to run:
-
-```bash
-make -j `nproc`
-```
-
-## Installing
-
-Once the compilation is complete, you can install in the configured paths with:
-
-```bash
-make install
-```
-(this might require sudo depending on the configured target directories)
-
-Web Setup
-=========
-
-NextEPC is configured with **Mongo DB**, which manages _Subscriber Information_ mainly, and **Configuration File** made in _JSON_ format.
-
-The configuration file can be modified using a general editor such as vi or emacs, but _Subscriber Information_ can be managed properly using _Mongo DB Client_.
-
-NextEPC provides **Web User Interface** solely designed to manage _Subscriber Information_ in an easy way without using _Mongo DB Client_. Let's how to install it from now on.
-
-## Install Node.js and NPM
-
-To get the latest **Node.js** and **NPM** version, you can visit the official **Node.js** website:
-[https://nodesjs.org/en/download/](https://nodesjs.org/en/download/).
-
-Or, you can install _Node.js_ and _NPM_ on **Ubuntu** as follows:
-
-```bash
-sudo apt-get -y install curl
-curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
-sudo apt-get -y install nodejs
-```
-
-## Install the dependencies for building the source
-
-The first step is to use **npm** to install all depedencies.
-
-```bash
-cd nextepc/webui
-npm install
-```
-
-## Build Web User Interface
-```bash
-npm run build
-```
-
-## Running Web Server
-
-```bash
-npm run start
-```
-
-## Login with default account
-
-Use **Web Browser** to connect it. _http://localhost:3000_
-
-  * Username : admin
-  * Password : 1423
-
-Then, you can change your password in _Account_ Menu.
-
-Network Configuration
-=====================
-
-NextEPC consists of five nodes such as _MME, SGW, PGW, HSS and PCRF_. Basically, each node can be installed in a physically separate host or in the same host.
-
-We will run these five nodes that make up NextEPC in a **Single Host**. The reason is why it is the easiest way to understand how to configure NextEPC network.
-
-## IP Configuration
-
-In order to run _MME, HSS, SGW, PGW, and PCRF_ on a **Single Host**, IP address is set by using **IP aliasing**.
-
-```bash
-sudo ifconfig eth1:hss 10.1.35.214/24 up
-sudo ifconfig eth1:mme 10.1.35.215/24 up
-sudo ifconfig eth1:sgw_s5 10.1.35.216/24 up
-sudo ifconfig eth1:sgw_s11 10.1.35.217/24 up
-sudo ifconfig eth1:pcrf 10.1.35.218/24 up
-sudo ifconfig eth1:pgw 10.1.35.219/24 up
-```
-
-## Setup for Data Path
-
-Use the **TUN Driver** to make _Data Path_ to be used by the **PGW**.
-
-```bash
-sudo ip tuntap add name pgwtun mode tun
-sudo ifconfig pgwtun 45.45.0.1/16 up
-```
-
-## Check Configuration File
-
-A configuration file is located `etc/nextepc.conf` from the installed paths. If you need to change the IP address for a particular problem, you should modify `XXXX_IPV4` field in the configuration file.
-
-For example, if you want the IP aliasing address of *PGW* to be _10.1.35.254_, `PGW.NETWORK.S5C_IPV4` and `PGW_NETWORK.S5U_IPV4` field should be updated like the followings.
-
-<pre>
-  PGW :
-  {
-    FD_CONF_PATH : "/etc/freeDiameter
-
-    NETWORK :
-    {
-      S5C_IPV4: "10.1.35.254",
-      S5U_IPV4: "10.1.35.254"
-    }
-
-    TUNNEL:
-    {
-      DEV_NAME: "pgwtun"
-    }
-
-    IP_POOL :
-    {
-      CIDR: 45.45.45.0/24
-    }
-
-    DNS :
-    {
-      PRIMARY_IPV4: "8.8.8.8",
-      SECONDARY_IPV4: "4.4.4.4"
-    }
-  }
-</pre>
-
-## Testing Network Configuration
-
-Once you are done, run the testing script.
-```bash
-./test/testepc
-```
-You can see the simulated packet through **Wireshark**.  _(FILTER : s1ap || gtpv2 || diameter)_
-
-Running NextEPC
-===============
-
-## Update GUMMEI and TAI
-
-The followings are the **GUMMEI** and **TAI** of the *MME* currently set to Default. Your *eNodeB* will also have a **PLMN ID** and **TAC** set. Refer to these parameters to change the setting of MME or eNodeB.
-
-<pre>
-GUMMEI:
-{
-  PLMN_ID : 
-  {
-    MCC : "001",
-    MNC : "01"
-  }
-  MME_GID : 2,
-  MME_CODE : 1
-},
-TAI:
-{
-  PLMN_ID :
-  {
-    MCC: "001",
-    MNC: "01",
-  }
-  TAC: 12345
-}
-</pre>
-
-For reference, MME can set several GUMMEI and TAI as **JSON array notation** as follows.
-
-<pre>
-GUMMEI:
-[
-  {
-    PLMN_ID : 
-    {
-      MCC : "001",
-      MNC : "01"
-    }
-    MME_GID : 2,
-    MME_CODE : 1
-  },
-  {
-    PLMN_ID : 
-    {
-      MCC : "005",
-      MNC : "05"
-    }
-    MME_GID : 5,
-    MME_CODE : 6
-  },
-]
-TAI:
-[
-  {
-    PLMN_ID :
-    {
-      MCC: "001",
-      MNC: "01",
-    }
-    TAC: 12345
-  },
-  {
-    PLMN_ID :
-    {
-      MCC: "005",
-      MNC: "05",
-    }
-    TAC: 6789
-  }
-]
-</pre>
-
-## Register Subscriber Information
-
-There is only one setting for this guide. The _Subscriber Information_ required for **HSS** should be registered in _Mongo DB_. Let's run the **Web User Interface** with `npm run start` as mentioned eariler.
-
-Connect http://localhost:3000 using Web Browser.
-
-  * Go to Subscriber Menu
-  * Click + Button to add Subscriber Information
-  * Fill IMSI, Security(K, OP, AMF), APN in the Form
-  * Click the `SAVE` Button
-
-## Running NextEPC
-
-Generally, to use NextEPC in several hosts, you must use an independent daemon called _mmed, sgwd, pgwd, hssd, and pcrfd_.
-
-However, we are preparing a more convenient daemon named **epcd**. It enables to service all five nodes of NextEPC.
-
-```bash
-./epcd
-```
-
-Turn on your **eNodeB** and **Mobile**. Check Wireshark!
-
-Hopefully, you can see the real packet for TAU/Service Request, Dedicated Bearer, Multiple APN, and S1/X2-Handover.
+<h1 align="center">Open5GS</h1>
+
+If you find Open5GS useful for work, please consider supporting this Open Source project by [Becoming a sponsor](https://github.com/sponsors/acetcom). To manage the funding transactions transparently, you can donate through [OpenCollective](https://opencollective.com/open5gs).
+
+<h3 align="center">Gold Sponsors</h3>
+<table>
+  <tbody>
+    <tr>
+      <td align="center" valign="middle">
+  <a href="http://wavemobile.com/" target="_blank">
+    <img width="260px" src="https://open5gs.org/assets/img/Wavemobile-Logo-Mark-RGB.png">
+  </a>
+      </td>
+    </tr>
+  </tbody>
+</table>
+
+<h3 align="center">Silver Sponsors</h3>
+<table>
+  <tbody>
+    <tr>
+      <td align="center" valign="middle" width="222px">
+        <a href="https://www.auctionsoftware.com/" target="_blank">
+          <img src="https://open5gs.org/assets/img/asLogonew.png">
+        </a>
+      </td>
+      <td align="center" valign="middle" width="222px">
+        <a href="https://nextepc.com/" target="_blank">
+          <img src="https://open5gs.org/assets/img/nextepc_logo.jpg">
+        </a>
+      </td>
+      <td align="center" valign="middle" width="222px">
+        <a href="https://www.wearetriple.com/" target="_blank">
+          <img src="https://open5gs.org/assets/img/triple_logo.png">
+        </a>
+      </td>
+    </tr>
+    <tr>
+      <td align="center" valign="middle" width="222px">
+        <a href="https://sdr.eee.strath.ac.uk/" target="_blank">
+          <img src="https://open5gs.org/assets/img/strath.png">
+        </a>
+      </td>
+      <td align="center" valign="middle" width="222px">
+        <a href="https://skylarkwireless.com/" target="_blank">
+          <img src="https://open5gs.org/assets/img/SkylarkWireless-420x78-Web2-R.png">
+        </a>
+      </td>
+      <td align="center" valign="middle" width="222px">
+        <a href="https://sysmocom.de/" target="_blank">
+          <img src="https://open5gs.org/assets/img/sysmocom-logo-only.png">
+        </a>
+      </td>
+    </tr>
+    <tr>
+      <td align="center" valign="middle" width="222px">
+        <a href="https://www.p1sec.com/" target="_blank">
+          <img src="https://open5gs.org/assets/img/2021-logo-P1.svg">
+        </a>
+      </td>
+      <td align="center" valign="middle" width="222px">
+        <a href="https://www.ng-voice.com/" target="_blank">
+          <img src="https://open5gs.org/assets/img/ng-voice-logo_color.png">
+        </a>
+      </td>
+      <td align="center" valign="middle" width="222px">
+        <a href="https://www.peratonlabs.com/" target="_blank">
+          <img src="https://open5gs.org/assets/img/peraton-labs-logo-full-color.png">
+        </a>
+      </td>
+    </tr>
+  </tbody>
+</table>
+
+## Documentation
+
+If you don't understand something about Open5GS, the [https://open5gs.org/open5gs/docs/](https://open5gs.org/open5gs/docs/) is a great place to look for answers.
+
+## Community
+
+- Problem with Open5GS can be filed as [issues](https://github.com/open5gs/open5gs/issues) in this repository.
+- Other topics related to this project are happening on the [discussions](https://github.com/open5gs/open5gs/discussions).
+- Voice and text chat are available in Open5GS's [Discord](https://discordapp.com/) workspace. Use [this link](https://discord.gg/GreNkuc) to get started.
+
+## Contributing
+
+If you're contributing through a pull request to Open5GS project on GitHub, please read the [Contributor License Agreement](https://open5gs.org/open5gs/cla/) in advance.
+
+## License
+
+- Open5GS Open Source files are made available under the terms of the GNU Affero General Public License ([GNU AGPL v3.0](https://www.gnu.org/licenses/agpl-3.0.html)).
+- [Commercial licenses](https://open5gs.org/open5gs/support/) are also available from [NextEPC, Inc.](https://nextepc.com)

acinclude.m4

@@ -1,90 +0,0 @@
-dnl
-dnl CORE_SUBST(varname)
-dnl
-dnl Adds variable with it's value into Makefile, e.g.:
-dnl CC = gcc
-dnl
-AC_DEFUN([CORE_SUBST],[
-  CORE_VAR_SUBST="$CORE_VAR_SUBST $1"
-])
-
-dnl
-dnl CORE_SUBST_OLD(varname)
-dnl
-dnl Same as CORE_SUBST() but also substitutes all @VARNAME@
-dnl instances in every file passed to AC_OUTPUT()
-dnl
-AC_DEFUN([CORE_SUBST_OLD],[
-  CORE_SUBST($1)
-  AC_SUBST($1)
-])
-
-dnl
-dnl CORE_CONFIG_NICE(filename)
-dnl
-dnl Generates the config.nice file
-dnl
-AC_DEFUN([CORE_CONFIG_NICE],[
-  AC_REQUIRE([AC_PROG_EGREP])
-  AC_REQUIRE([LT_AC_PROG_SED])
-  CORE_SUBST_OLD(EGREP)
-  CORE_SUBST_OLD(SED)
-  test -f $1 && mv $1 $1.old
-  rm -f $1.old
-  cat >$1<<EOF
-#! /bin/sh
-#
-# Created by configure
-
-EOF
-
-  for var in CFLAGS CXXFLAGS CPPFLAGS LDFLAGS EXTRA_LDFLAGS_PROGRAM LIBS CC CXX; do
-    eval val=\$$var
-    if test -n "$val"; then
-      echo "$var='$val' \\" >> $1
-    fi
-  done
-
-  echo "'[$]0' \\" >> $1
-  if test `expr -- [$]0 : "'.*"` = 0; then
-    CONFIGURE_COMMAND="$CONFIGURE_COMMAND '[$]0'"
-  else 
-    CONFIGURE_COMMAND="$CONFIGURE_COMMAND [$]0"
-  fi
-  for arg in $ac_configure_args; do
-     if test `expr -- $arg : "'.*"` = 0; then
-        if test `expr -- $arg : "--.*"` = 0; then
-       	  break;
-        fi
-        echo "'[$]arg' \\" >> $1
-        CONFIGURE_OPTIONS="$CONFIGURE_OPTIONS '[$]arg'"
-     else
-        if test `expr -- $arg : "'--.*"` = 0; then
-       	  break;
-        fi
-        echo "[$]arg \\" >> $1
-        CONFIGURE_OPTIONS="$CONFIGURE_OPTIONS [$]arg"
-     fi
-  done
-  echo '"[$]@"' >> $1
-  chmod +x $1
-  CONFIGURE_COMMAND="$CONFIGURE_COMMAND $CONFIGURE_OPTIONS"
-  CORE_SUBST_OLD(CONFIGURE_COMMAND)
-  CORE_SUBST_OLD(CONFIGURE_OPTIONS)
-])
-
-AC_DEFUN([AX_CHECK_COMPILE_FLAG],
-[AC_PREREQ(2.59)dnl for _AC_LANG_PREFIX
-AS_VAR_PUSHDEF([CACHEVAR],[ax_cv_check_[]_AC_LANG_ABBREV[]flags_$4_$1])dnl
-AC_CACHE_CHECK([whether _AC_LANG compiler accepts $1], CACHEVAR, [
-  ax_check_save_flags=$[]_AC_LANG_PREFIX[]FLAGS
-  _AC_LANG_PREFIX[]FLAGS="$[]_AC_LANG_PREFIX[]FLAGS $4 $1"
-  AC_COMPILE_IFELSE([m4_default([$5],[AC_LANG_PROGRAM()])],
-    [AS_VAR_SET(CACHEVAR,[yes])],
-    [AS_VAR_SET(CACHEVAR,[no])])
-  _AC_LANG_PREFIX[]FLAGS=$ax_check_save_flags])
-AS_IF([test x"AS_VAR_GET(CACHEVAR)" = xyes],
-  [m4_default([$2], :)],
-  [m4_default([$3], :)])
-AS_VAR_POPDEF([CACHEVAR])dnl
-])dnl AX_CHECK_COMPILE_FLAGS

configs/310014.yaml.in

@@ -0,0 +1,230 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 310
+        mnc: 014
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 310
+        mnc: 014
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 310
+          mnc: 014
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 310
+          mnc: 014
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 310
+          mnc: 014
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/csfb.yaml.in

@@ -0,0 +1,264 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    sgsap:
+      - addr: 127.0.0.2
+        map:
+          tai:
+            plmn_id:
+              mcc: 901
+              mnc: 70
+            tac: 7
+          lai:
+            plmn_id:
+              mcc: 901
+              mnc: 70
+            lac: 2342
+        map:
+          tai:
+            plmn_id:
+              mcc: 724
+              mnc: 21
+            tac: 12345
+          lai:
+            plmn_id:
+              mcc: 724
+              mnc: 21
+            lac: 51544
+    gummei:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        mme_gid: 2
+        mme_code: 1
+      - plmn_id:
+          mcc: 724
+          mnc: 21
+        mme_gid: 2
+        mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 7
+    tai:
+      plmn_id:
+        mcc: 724
+        mnc: 21
+      tac: 12345
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+#nrf:
+#    sbi:
+#      - addr:
+#        - 127.0.0.10
+#        - ::1
+#        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/freeDiameter/cacert.pem

@@ -0,0 +1,17 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

configs/freeDiameter/hss.cert.pem

@@ -0,0 +1,60 @@
+Certificate:
+    Data:
+        Version: 3 (0x2)
+        Serial Number: 2 (0x2)
+        Signature Algorithm: sha256WithRSAEncryption
+        Issuer: CN=ca.localdomain, C=KO, ST=Seoul, L=Nowon, O=Open5GS, OU=Tests
+        Validity
+            Not Before: Aug 22 00:39:17 2020 GMT
+            Not After : Aug 20 00:39:17 2030 GMT
+        Subject: C=KO, ST=Seoul, O=Open5GS, OU=Tests, CN=hss.localdomain
+        Subject Public Key Info:
+            Public Key Algorithm: rsaEncryption
+                RSA Public-Key: (1024 bit)
+                Modulus:
+                    00:e8:b3:82:96:bd:4a:f6:30:2c:03:60:aa:82:65:
+                    b0:15:32:5f:d3:90:0d:c0:1d:06:62:52:51:c7:12:
+                    36:d7:5c:34:21:ac:4a:44:4d:9b:a5:22:9c:3e:86:
+                    a8:ba:df:02:64:b6:74:f5:95:c4:71:e8:e0:28:1d:
+                    2b:ea:06:94:fa:3c:f1:07:d3:23:55:b6:84:d4:00:
+                    f4:28:08:18:be:c7:38:e1:b7:d9:b4:bf:d3:e1:d3:
+                    d8:13:60:72:e1:e4:d3:31:37:b1:cf:b9:e1:c9:8d:
+                    5e:e2:1c:54:a3:90:b1:69:6f:07:90:ff:68:86:69:
+                    7d:ef:50:69:0d:9d:47:18:39
+                Exponent: 65537 (0x10001)
+        X509v3 extensions:
+            X509v3 Basic Constraints: 
+                CA:FALSE
+            Netscape Comment: 
+                OpenSSL Generated Certificate
+            X509v3 Subject Key Identifier: 
+                74:20:F9:E9:BD:E1:37:8A:9C:A9:AD:B4:B2:28:7D:44:22:0B:BD:0B
+            X509v3 Authority Key Identifier: 
+                keyid:64:FB:C8:D7:A3:20:17:DC:A8:3A:AA:4B:2B:85:CD:BD:3E:53:4B:09
+
+    Signature Algorithm: sha256WithRSAEncryption
+         ac:aa:85:5a:57:61:6d:7d:f3:c4:2a:b7:73:3f:e9:bc:b9:6d:
+         0a:8f:35:24:13:66:46:14:5e:60:90:3e:32:95:72:5a:21:55:
+         15:fe:ef:30:44:fb:fe:3e:cb:bf:f3:30:ce:3b:bb:4f:c1:64:
+         41:ea:db:99:f2:ca:db:78:03:95:81:91:3c:fa:1d:9c:8a:55:
+         eb:9d:6a:c1:b6:de:44:38:0f:99:b4:66:d5:4e:dd:e7:d5:ba:
+         ff:f2:4b:f6:9a:94:53:55:36:4e:73:2d:da:d1:bb:0f:8f:fb:
+         1a:22:43:28:6a:b4:5d:a3:40:2c:cf:7e:0d:3e:fb:60:ef:92:
+         f3:0e
+-----BEGIN CERTIFICATE-----
+MIICsjCCAhugAwIBAgIBAjANBgkqhkiG9w0BAQsFADBoMRcwFQYDVQQDDA5jYS5s
+b2NhbGRvbWFpbjELMAkGA1UEBhMCS08xDjAMBgNVBAgMBVNlb3VsMQ4wDAYDVQQH
+DAVOb3dvbjEQMA4GA1UECgwHT3BlbjVHUzEOMAwGA1UECwwFVGVzdHMwHhcNMjAw
+ODIyMDAzOTE3WhcNMzAwODIwMDAzOTE3WjBZMQswCQYDVQQGEwJLTzEOMAwGA1UE
+CAwFU2VvdWwxEDAOBgNVBAoMB09wZW41R1MxDjAMBgNVBAsMBVRlc3RzMRgwFgYD
+VQQDDA9oc3MubG9jYWxkb21haW4wgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGB
+AOizgpa9SvYwLANgqoJlsBUyX9OQDcAdBmJSUccSNtdcNCGsSkRNm6UinD6GqLrf
+AmS2dPWVxHHo4CgdK+oGlPo88QfTI1W2hNQA9CgIGL7HOOG32bS/0+HT2BNgcuHk
+0zE3sc+54cmNXuIcVKOQsWlvB5D/aIZpfe9QaQ2dRxg5AgMBAAGjezB5MAkGA1Ud
+EwQCMAAwLAYJYIZIAYb4QgENBB8WHU9wZW5TU0wgR2VuZXJhdGVkIENlcnRpZmlj
+YXRlMB0GA1UdDgQWBBR0IPnpveE3ipyprbSyKH1EIgu9CzAfBgNVHSMEGDAWgBRk
++8jXoyAX3Kg6qksrhc29PlNLCTANBgkqhkiG9w0BAQsFAAOBgQCsqoVaV2FtffPE
+KrdzP+m8uW0KjzUkE2ZGFF5gkD4ylXJaIVUV/u8wRPv+Psu/8zDOO7tPwWRB6tuZ
+8srbeAOVgZE8+h2cilXrnWrBtt5EOA+ZtGbVTt3n1br/8kv2mpRTVTZOcy3a0bsP
+j/saIkMoarRdo0Asz34NPvtg75LzDg==
+-----END CERTIFICATE-----

configs/freeDiameter/hss.conf.in

@@ -51,7 +51,6 @@ Realm = "localdomain";
 # Disable use of SCTP protocol (only listen and connect over TCP)
 # Default : SCTP enabled
 #No_SCTP;
-No_SCTP;
 # This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
 
 # Prefer TCP instead of SCTP for establishing new connections.
@@ -80,7 +79,7 @@ No_SCTP;
 #ListenOn = "202.249.37.5";
 #ListenOn = "2001:200:903:2::202:1";
 #ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
-ListenOn = "10.1.35.214";
+ListenOn = "127.0.0.8";
 
 
 ##############################################################
@@ -107,8 +106,7 @@ ListenOn = "10.1.35.214";
 # Default : NO DEFAULT
 #TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
 #TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
-TLS_Cred = "@prefix@/etc/freeDiameter/hss.cert.pem",
-           "@prefix@/etc/freeDiameter/hss.key.pem";
+TLS_Cred = "@sysconfdir@/freeDiameter/hss.cert.pem", "@sysconfdir@/freeDiameter/hss.key.pem";
 
 # Certificate authority / trust anchors
 # The file containing the list of trusted Certificate Authorities (PEM list)
@@ -116,7 +114,7 @@ TLS_Cred = "@prefix@/etc/freeDiameter/hss.cert.pem",
 # The directive can appear several times to specify several files.
 # Default : GNUTLS default behavior
 #TLS_CA = "<file.PEM>";
-TLS_CA = "@prefix@/etc/freeDiameter/cacert.pem";
+TLS_CA = "@sysconfdir@/freeDiameter/cacert.pem";
 
 # Certificate Revocation List file
 # The information about revoked certificates.
@@ -177,6 +175,7 @@ TLS_CA = "@prefix@/etc/freeDiameter/cacert.pem";
 # exchanges.
 # Default: Relaying is enabled.
 #NoRelay;
+NoRelay;
 
 # Number of server threads that can handle incoming messages at the same time.
 # Default: 4
@@ -224,14 +223,13 @@ TLS_CA = "@prefix@/etc/freeDiameter/cacert.pem";
 #  4 - full    - display the complete information on a single long line
 #  8 - tree    - display the complete information in an easier to read format spanning several lines.
 
-LoadExtension = "@prefix@/lib/nextepc/dbg_msg_dumps.so" : "0x8888";
-LoadExtension = "@prefix@/lib/nextepc/dict_rfc5777.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_mip6i.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_nasreq.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_nas_mipv6.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_dcca.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_dcca_3gpp.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_s6a.so";
+LoadExtension = "@libdir@/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "@libdir@/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca_3gpp.fdx";
 
 
 ##############################################################
@@ -263,6 +261,6 @@ LoadExtension = "@prefix@/lib/nextepc/dict_s6a.so";
 # Examples:
 #ConnectPeer = "aaa.wide.ad.jp";
 #ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
-ConnectPeer = "mme.localdomain" { ConnectTo = "10.1.35.215"; No_TLS; };
+ConnectPeer = "mme.localdomain" { ConnectTo = "127.0.0.2"; No_TLS; };
 
 ##############################################################

configs/freeDiameter/hss.key.pem

@@ -0,0 +1,15 @@
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----

configs/freeDiameter/meson.build

@@ -0,0 +1,57 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+freediameter_sysconfdir = join_paths(sysconfdir, 'freeDiameter')
+meson.add_install_script(python3_exe, '-c',
+        mkdir_p.format(freediameter_sysconfdir))
+
+freediameter_conf = '''
+    mme.conf
+    hss.conf
+    smf.conf
+    pcrf.conf
+'''.split()
+
+foreach file : freediameter_conf
+    gen = configure_file(
+            input : file + '.in',
+            output : file,
+            configuration : conf_data)
+    meson.add_install_script(python3_exe, '-c',
+            install_conf.format(gen, freediameter_sysconfdir))
+endforeach
+
+freediameter_pem = '''
+    cacert.pem
+    mme.cert.pem
+    mme.key.pem
+    hss.cert.pem
+    hss.key.pem
+    smf.cert.pem
+    smf.key.pem
+    pcrf.cert.pem
+    pcrf.key.pem
+'''.split()
+
+foreach file : freediameter_pem
+    gen = configure_file(
+            input : file,
+            output : file,
+            configuration : conf_data)
+    meson.add_install_script(python3_exe, '-c',
+            install_conf.format(gen, freediameter_sysconfdir))
+endforeach

configs/freeDiameter/mme.cert.pem

@@ -0,0 +1,60 @@
+Certificate:
+    Data:
+        Version: 3 (0x2)
+        Serial Number: 1 (0x1)
+        Signature Algorithm: sha256WithRSAEncryption
+        Issuer: CN=ca.localdomain, C=KO, ST=Seoul, L=Nowon, O=Open5GS, OU=Tests
+        Validity
+            Not Before: Aug 22 00:39:17 2020 GMT
+            Not After : Aug 20 00:39:17 2030 GMT
+        Subject: C=KO, ST=Seoul, O=Open5GS, OU=Tests, CN=mme.localdomain
+        Subject Public Key Info:
+            Public Key Algorithm: rsaEncryption
+                RSA Public-Key: (1024 bit)
+                Modulus:
+                    00:9c:69:25:fc:ee:7f:11:e0:81:f7:b5:51:8f:01:
+                    b8:9e:01:74:03:3e:a5:25:de:6f:28:66:05:6f:7b:
+                    ab:86:0f:09:fc:94:7b:e8:aa:9f:0b:5f:32:27:46:
+                    f0:ca:e2:12:f3:5d:03:80:e9:9a:1d:f0:20:d6:5c:
+                    1b:4b:65:d4:66:e3:b7:63:19:6e:b1:e8:db:6c:24:
+                    df:24:2c:50:f2:1c:8a:33:c1:f7:27:b8:3c:6e:c6:
+                    90:98:ac:43:67:00:6b:3d:ab:39:49:3d:d5:74:77:
+                    6a:0e:38:4e:41:cd:e4:15:63:27:76:b5:9c:75:f8:
+                    cb:6f:cc:5e:f3:a7:68:ef:a5
+                Exponent: 65537 (0x10001)
+        X509v3 extensions:
+            X509v3 Basic Constraints: 
+                CA:FALSE
+            Netscape Comment: 
+                OpenSSL Generated Certificate
+            X509v3 Subject Key Identifier: 
+                92:69:1E:3F:9F:E2:40:2F:81:24:05:B4:13:AA:8A:65:5C:7C:71:1D
+            X509v3 Authority Key Identifier: 
+                keyid:64:FB:C8:D7:A3:20:17:DC:A8:3A:AA:4B:2B:85:CD:BD:3E:53:4B:09
+
+    Signature Algorithm: sha256WithRSAEncryption
+         74:fc:32:ee:e6:2b:a5:f5:a4:71:64:49:ff:eb:6f:01:30:32:
+         b7:61:62:97:e1:2c:0f:50:62:a8:71:9a:bd:8b:d8:0d:4b:28:
+         ea:b4:5f:1c:30:3e:4c:23:2f:c5:5b:77:ed:48:c2:bb:b7:0c:
+         d9:50:4d:7f:7f:a3:b9:1e:2c:19:33:1e:41:94:e1:14:1b:45:
+         e8:ae:27:aa:5e:78:8e:67:67:19:69:48:e3:e4:c0:c3:a7:85:
+         fd:fd:d6:62:6e:dd:1f:31:2f:bc:9a:d2:fa:82:eb:4b:3e:35:
+         e0:90:db:ed:de:1a:68:33:6f:e6:90:9f:08:64:60:46:91:09:
+         74:15
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

configs/freeDiameter/mme.conf.in

@@ -51,7 +51,6 @@ Realm = "localdomain";
 # Disable use of SCTP protocol (only listen and connect over TCP)
 # Default : SCTP enabled
 #No_SCTP;
-No_SCTP;
 # This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
 
 # Prefer TCP instead of SCTP for establishing new connections.
@@ -80,7 +79,7 @@ No_SCTP;
 #ListenOn = "202.249.37.5";
 #ListenOn = "2001:200:903:2::202:1";
 #ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
-ListenOn = "10.1.35.215";
+ListenOn = "127.0.0.2";
 
 
 ##############################################################
@@ -107,8 +106,7 @@ ListenOn = "10.1.35.215";
 # Default : NO DEFAULT
 #TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
 #TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
-TLS_Cred = "@prefix@/etc/freeDiameter/mme.cert.pem",
-           "@prefix@/etc/freeDiameter/mme.key.pem";
+TLS_Cred = "@sysconfdir@/freeDiameter/mme.cert.pem", "@sysconfdir@/freeDiameter/mme.key.pem";
 
 # Certificate authority / trust anchors
 # The file containing the list of trusted Certificate Authorities (PEM list)
@@ -116,7 +114,7 @@ TLS_Cred = "@prefix@/etc/freeDiameter/mme.cert.pem",
 # The directive can appear several times to specify several files.
 # Default : GNUTLS default behavior
 #TLS_CA = "<file.PEM>";
-TLS_CA = "@prefix@/etc/freeDiameter/cacert.pem";
+TLS_CA = "@sysconfdir@/freeDiameter/cacert.pem";
 
 # Certificate Revocation List file
 # The information about revoked certificates.
@@ -177,6 +175,7 @@ TLS_CA = "@prefix@/etc/freeDiameter/cacert.pem";
 # exchanges.
 # Default: Relaying is enabled.
 #NoRelay;
+NoRelay;
 
 # Number of server threads that can handle incoming messages at the same time.
 # Default: 4
@@ -224,14 +223,13 @@ TLS_CA = "@prefix@/etc/freeDiameter/cacert.pem";
 #  4 - full    - display the complete information on a single long line
 #  8 - tree    - display the complete information in an easier to read format spanning several lines.
 
-LoadExtension = "@prefix@/lib/nextepc/dbg_msg_dumps.so" : "0x8888";
-LoadExtension = "@prefix@/lib/nextepc/dict_rfc5777.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_mip6i.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_nasreq.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_nas_mipv6.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_dcca.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_dcca_3gpp.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_s6a.so";
+LoadExtension = "@libdir@/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "@libdir@/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca_3gpp.fdx";
 
 
 ##############################################################
@@ -263,7 +261,7 @@ LoadExtension = "@prefix@/lib/nextepc/dict_s6a.so";
 # Examples:
 #ConnectPeer = "aaa.wide.ad.jp";
 #ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
-ConnectPeer = "hss.localdomain" { ConnectTo = "10.1.35.214"; No_TLS; };
+ConnectPeer = "hss.localdomain" { ConnectTo = "127.0.0.8"; No_TLS; };
 
 
 ##############################################################

configs/freeDiameter/mme.key.pem

@@ -0,0 +1,15 @@
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----

configs/freeDiameter/pcrf.cert.pem

@@ -0,0 +1,60 @@
+Certificate:
+    Data:
+        Version: 3 (0x2)
+        Serial Number: 4 (0x4)
+        Signature Algorithm: sha256WithRSAEncryption
+        Issuer: CN=ca.localdomain, C=KO, ST=Seoul, L=Nowon, O=Open5GS, OU=Tests
+        Validity
+            Not Before: Aug 22 00:39:17 2020 GMT
+            Not After : Aug 20 00:39:17 2030 GMT
+        Subject: C=KO, ST=Seoul, O=Open5GS, OU=Tests, CN=pcrf.localdomain
+        Subject Public Key Info:
+            Public Key Algorithm: rsaEncryption
+                RSA Public-Key: (1024 bit)
+                Modulus:
+                    00:b9:1f:b3:a5:74:de:31:97:ac:fa:86:1d:65:86:
+                    c7:be:b1:25:07:01:f3:69:21:7a:6d:ec:d7:c8:ec:
+                    e2:c9:e8:71:a1:07:ce:0e:68:e5:0f:a9:ec:f3:5e:
+                    5e:3e:a4:ea:27:f3:fa:65:36:2d:7c:ce:a8:70:cc:
+                    34:db:51:b2:28:7b:03:bf:78:06:61:7c:44:81:17:
+                    88:f9:c9:16:cb:2e:9f:21:4a:24:28:0a:0f:76:ef:
+                    63:0f:05:a4:ee:52:64:1f:4f:0b:ec:4e:6c:1b:12:
+                    40:43:75:ed:62:16:ec:6a:ba:15:dd:c4:b9:fa:a9:
+                    de:2c:80:f5:84:c5:97:ec:7b
+                Exponent: 65537 (0x10001)
+        X509v3 extensions:
+            X509v3 Basic Constraints: 
+                CA:FALSE
+            Netscape Comment: 
+                OpenSSL Generated Certificate
+            X509v3 Subject Key Identifier: 
+                CD:C4:C9:C1:7F:D9:34:1F:DB:08:61:27:FC:59:A2:C2:CC:19:9A:7B
+            X509v3 Authority Key Identifier: 
+                keyid:64:FB:C8:D7:A3:20:17:DC:A8:3A:AA:4B:2B:85:CD:BD:3E:53:4B:09
+
+    Signature Algorithm: sha256WithRSAEncryption
+         24:3a:da:a7:50:b3:42:ab:e9:87:21:b2:d9:2b:a1:44:0b:5f:
+         bd:ad:c9:8b:b1:ca:d5:2e:65:46:55:80:11:00:33:03:f9:04:
+         b1:31:a2:c9:d2:41:e0:ec:73:bc:9a:3c:31:06:cc:d0:2d:73:
+         1f:b4:93:1c:b0:99:dd:14:27:64:39:7e:c5:ab:53:48:c5:25:
+         e8:88:fd:4e:b8:dd:64:88:b5:b4:89:8b:15:97:8b:e7:c9:fb:
+         23:6c:ed:60:9b:2f:f0:99:7a:75:6c:8e:ea:09:c6:ba:ff:e9:
+         81:3f:97:96:8b:00:58:5b:88:13:e8:8a:39:4c:f6:c9:06:d3:
+         24:66
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

configs/freeDiameter/pcrf.conf.in

@@ -51,7 +51,6 @@ Realm = "localdomain";
 # Disable use of SCTP protocol (only listen and connect over TCP)
 # Default : SCTP enabled
 #No_SCTP;
-No_SCTP;
 # This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
 
 # Prefer TCP instead of SCTP for establishing new connections.
@@ -80,7 +79,7 @@ No_SCTP;
 #ListenOn = "202.249.37.5";
 #ListenOn = "2001:200:903:2::202:1";
 #ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
-ListenOn = "10.1.35.218";
+ListenOn = "127.0.0.9";
 
 
 ##############################################################
@@ -107,7 +106,7 @@ ListenOn = "10.1.35.218";
 # Default : NO DEFAULT
 #TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
 #TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
-TLS_Cred = "@prefix@/etc/freeDiameter/pcrf.cert.pem", "@prefix@/etc/freeDiameter/pcrf.key.pem";
+TLS_Cred = "@sysconfdir@/freeDiameter/pcrf.cert.pem", "@sysconfdir@/freeDiameter/pcrf.key.pem";
 
 # Certificate authority / trust anchors
 # The file containing the list of trusted Certificate Authorities (PEM list)
@@ -115,7 +114,7 @@ TLS_Cred = "@prefix@/etc/freeDiameter/pcrf.cert.pem", "@prefix@/etc/freeDiameter
 # The directive can appear several times to specify several files.
 # Default : GNUTLS default behavior
 #TLS_CA = "<file.PEM>";
-TLS_CA = "@prefix@/etc/freeDiameter/cacert.pem";
+TLS_CA = "@sysconfdir@/freeDiameter/cacert.pem";
 
 # Certificate Revocation List file
 # The information about revoked certificates.
@@ -176,6 +175,7 @@ TLS_CA = "@prefix@/etc/freeDiameter/cacert.pem";
 # exchanges.
 # Default: Relaying is enabled.
 #NoRelay;
+NoRelay;
 
 # Number of server threads that can handle incoming messages at the same time.
 # Default: 4
@@ -223,14 +223,13 @@ TLS_CA = "@prefix@/etc/freeDiameter/cacert.pem";
 #  4 - full    - display the complete information on a single long line
 #  8 - tree    - display the complete information in an easier to read format spanning several lines.
 
-LoadExtension = "@prefix@/lib/nextepc/dbg_msg_dumps.so" : "0x8888";
-LoadExtension = "@prefix@/lib/nextepc/dict_rfc5777.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_mip6i.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_nasreq.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_nas_mipv6.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_dcca.so";
-LoadExtension = "@prefix@/lib/nextepc/dict_dcca_3gpp.so";
-#LoadExtension = "@prefix@/lib/nextepc/dict_legacy_xml.so" : "@prefix@/etc/freeDiameter/dict_legacy_xml.conf";
+LoadExtension = "@libdir@/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "@libdir@/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca_3gpp.fdx";
 
 
 ##############################################################
@@ -262,6 +261,6 @@ LoadExtension = "@prefix@/lib/nextepc/dict_dcca_3gpp.so";
 # Examples:
 #ConnectPeer = "aaa.wide.ad.jp";
 #ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
-ConnectPeer = "pgw.localdomain" { ConnectTo = "10.1.35.219"; No_TLS; };
+ConnectPeer = "smf.localdomain" { ConnectTo = "127.0.0.4"; No_TLS; };
 
 ##############################################################

configs/freeDiameter/pcrf.key.pem

@@ -0,0 +1,15 @@
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----

configs/freeDiameter/smf.cert.pem

@@ -0,0 +1,60 @@
+Certificate:
+    Data:
+        Version: 3 (0x2)
+        Serial Number: 3 (0x3)
+        Signature Algorithm: sha256WithRSAEncryption
+        Issuer: CN=ca.localdomain, C=KO, ST=Seoul, L=Nowon, O=Open5GS, OU=Tests
+        Validity
+            Not Before: Aug 22 00:39:17 2020 GMT
+            Not After : Aug 20 00:39:17 2030 GMT
+        Subject: C=KO, ST=Seoul, O=Open5GS, OU=Tests, CN=smf.localdomain
+        Subject Public Key Info:
+            Public Key Algorithm: rsaEncryption
+                RSA Public-Key: (1024 bit)
+                Modulus:
+                    00:ad:d6:cb:88:33:51:23:72:f1:16:29:2a:df:b7:
+                    75:d7:38:9e:da:18:b6:27:73:a8:60:ec:04:8f:d0:
+                    cd:c6:2e:10:ff:bd:c3:c2:a3:d7:53:e7:9e:73:07:
+                    07:a9:59:16:b1:7f:92:79:4d:d8:ee:5a:c7:ed:ef:
+                    37:83:8a:7d:94:08:41:0b:34:68:27:a5:4b:7d:cb:
+                    29:fb:85:c0:21:6e:17:72:32:29:7a:28:be:94:31:
+                    56:d2:85:9f:4b:b1:33:6f:f9:eb:01:9c:e7:2f:68:
+                    94:6b:91:58:a7:80:04:94:3c:b3:19:96:91:31:f7:
+                    c4:81:98:2b:85:8f:5c:f0:fd
+                Exponent: 65537 (0x10001)
+        X509v3 extensions:
+            X509v3 Basic Constraints: 
+                CA:FALSE
+            Netscape Comment: 
+                OpenSSL Generated Certificate
+            X509v3 Subject Key Identifier: 
+                91:4B:EF:65:02:0D:C8:85:FA:4A:3F:29:C0:10:3C:1B:AE:E4:AD:A4
+            X509v3 Authority Key Identifier: 
+                keyid:64:FB:C8:D7:A3:20:17:DC:A8:3A:AA:4B:2B:85:CD:BD:3E:53:4B:09
+
+    Signature Algorithm: sha256WithRSAEncryption
+         a3:6e:4f:00:bd:1a:62:b9:86:0f:35:f6:18:8d:15:61:a2:bc:
+         05:07:f1:73:8d:70:6f:e1:34:f1:ae:87:26:87:13:0b:c8:d8:
+         29:16:70:02:12:73:36:f9:de:43:26:12:7d:9f:d2:20:7c:e2:
+         76:47:0b:14:ba:67:e5:5a:0d:22:3b:00:c8:35:ab:dd:b1:9a:
+         e5:75:b0:86:89:02:15:32:b3:e9:48:c3:e0:38:e1:56:4c:fd:
+         aa:12:96:00:6d:a6:c3:ab:b0:8c:4b:ab:b2:4c:c2:08:26:ab:
+         d6:3f:26:95:4a:da:b8:dd:9a:f8:fe:b9:c2:e3:7a:a3:2f:2c:
+         7f:df
+-----BEGIN CERTIFICATE-----
+MIICsjCCAhugAwIBAgIBAzANBgkqhkiG9w0BAQsFADBoMRcwFQYDVQQDDA5jYS5s
+b2NhbGRvbWFpbjELMAkGA1UEBhMCS08xDjAMBgNVBAgMBVNlb3VsMQ4wDAYDVQQH
+DAVOb3dvbjEQMA4GA1UECgwHT3BlbjVHUzEOMAwGA1UECwwFVGVzdHMwHhcNMjAw
+ODIyMDAzOTE3WhcNMzAwODIwMDAzOTE3WjBZMQswCQYDVQQGEwJLTzEOMAwGA1UE
+CAwFU2VvdWwxEDAOBgNVBAoMB09wZW41R1MxDjAMBgNVBAsMBVRlc3RzMRgwFgYD
+VQQDDA9zbWYubG9jYWxkb21haW4wgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGB
+AK3Wy4gzUSNy8RYpKt+3ddc4ntoYtidzqGDsBI/QzcYuEP+9w8Kj11PnnnMHB6lZ
+FrF/knlN2O5ax+3vN4OKfZQIQQs0aCelS33LKfuFwCFuF3IyKXoovpQxVtKFn0ux
+M2/56wGc5y9olGuRWKeABJQ8sxmWkTH3xIGYK4WPXPD9AgMBAAGjezB5MAkGA1Ud
+EwQCMAAwLAYJYIZIAYb4QgENBB8WHU9wZW5TU0wgR2VuZXJhdGVkIENlcnRpZmlj
+YXRlMB0GA1UdDgQWBBSRS+9lAg3IhfpKPynAEDwbruStpDAfBgNVHSMEGDAWgBRk
++8jXoyAX3Kg6qksrhc29PlNLCTANBgkqhkiG9w0BAQsFAAOBgQCjbk8AvRpiuYYP
+NfYYjRVhorwFB/FzjXBv4TTxrocmhxMLyNgpFnACEnM2+d5DJhJ9n9IgfOJ2RwsU
+umflWg0iOwDINavdsZrldbCGiQIVMrPpSMPgOOFWTP2qEpYAbabDq7CMS6uyTMII
+JqvWPyaVStq43Zr4/rnC43qjLyx/3w==
+-----END CERTIFICATE-----

configs/freeDiameter/smf.conf.in

@@ -0,0 +1,267 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included file(s) 
+# where the "include" keyword is found.
+
+
+##############################################################
+##  Peer identity and realm 
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "smf.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+##  Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+#Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections (TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+#SecPort = 5868;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed 
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the 
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections. 
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+##  Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "127.0.0.4";
+
+
+##############################################################
+##  Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+##  TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
+TLS_Cred = "@sysconfdir@/freeDiameter/smf.cert.pem", "@sysconfdir@/freeDiameter/smf.key.pem";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+TLS_CA = "@sysconfdir@/freeDiameter/cacert.pem";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have been verified before. 
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges 
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+#   http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function, 
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start 
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+##  Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+##  Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing 
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA 
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+##  Extensions configuration
+
+#  The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+#  These extensions may in addition receive the name of a 
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_*  for extensions useful only to retrieve more information on the framework execution.
+# acl_*  : Access control list, to control which peers are allowed to connect.
+# rt_*   : routing extensions that impact how messages are forwarded to other peers.
+# app_*  : applications, these extensions usually register callbacks to handle specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter displays some
+# information about some events. This extension does not actually use a configuration file
+# but receives directly a parameter in the string passed to the extension. Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information about sent and received messages.
+# The four digits respectively control: connections, routing decisions, sent/received messages, errors.
+# The values for each digit are:
+#  0 - default - keep the default behavior
+#  1 - quiet   - remove any specific log
+#  2 - compact - display only a summary of the information
+#  4 - full    - display the complete information on a single long line
+#  8 - tree    - display the complete information in an easier to read format spanning several lines.
+
+LoadExtension = "@libdir@/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "@libdir@/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca_3gpp.fdx";
+
+
+##############################################################
+##  Peers configuration
+
+#  The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this behavior (e.g., acl_wl).
+# 
+#  In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some 
+# Diameter nodes and allow connections from these nodes.
+#  This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+#  No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+#  No_TLS;       # assume transparent security instead of TLS. DTLS is not supported yet (will change in future versions).
+#  Port = 5868;  # The port to connect to
+#  TcTimer = 30;
+#  TwTimer = 30;
+#  ConnectTo = "202.249.37.5";
+#  ConnectTo = "2001:200:903:2::202:1";
+#  TLS_Prio = "NORMAL";
+#  Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
+ConnectPeer = "pcrf.localdomain" { ConnectTo = "127.0.0.9"; No_TLS; };
+
+
+##############################################################

configs/freeDiameter/smf.key.pem

@@ -0,0 +1,15 @@
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----

configs/logrotate/meson.build

@@ -0,0 +1,19 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+file = 'open5gs'
+configure_file(input : file + '.in', output : file, configuration : conf_data)

configs/logrotate/open5gs.in

@@ -0,0 +1,14 @@
+@localstatedir@/log/open5gs/*.log {
+    daily
+    sharedscripts
+    missingok
+    compress
+    rotate 14
+    create 640 open5gs open5gs
+
+    postrotate
+        for i in nrfd pcrfd hssd ausfd udmd udrd upfd sgwcd sgwud smfd mmed amfd; do
+            systemctl reload open5gs-$i
+        done
+    endscript
+}

configs/meson.build

@@ -0,0 +1,52 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+conf_data = configuration_data()
+
+conf_data.set('bindir', bindir)
+conf_data.set('sysconfdir', sysconfdir)
+conf_data.set('libdir', libdir)
+conf_data.set('localstatedir', localstatedir)
+
+freediameter_extensions_builddir = join_paths(
+        meson.build_root(), 'subprojects', 'freeDiameter', 'extensions')
+conf_data.set('freediameter_extensions_builddir',
+        freediameter_extensions_builddir)
+
+example_conf = '''
+    sample.yaml
+    310014.yaml
+    csfb.yaml
+    volte.yaml
+    vonr.yaml
+    slice.yaml
+    srslte.yaml
+    non3gpp.yaml
+'''.split()
+
+foreach file : example_conf
+    gen = configure_file(
+            input : file + '.in',
+            output : file,
+            configuration : conf_data)
+endforeach
+
+subdir('open5gs')
+subdir('freeDiameter')
+subdir('systemd')
+subdir('logrotate')
+subdir('newsyslog')

configs/newsyslog/meson.build

@@ -0,0 +1,19 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+file = 'open5gs.conf'
+configure_file(input : file + '.in', output : file, configuration : conf_data)

configs/newsyslog/open5gs.conf.in

@@ -0,0 +1,15 @@
+# truncate rails logs every day at midnight, keep 14 previous logs, compress previous logs
+#
+# logfilename                         [owner:group] mode count size  when  flags [/pid_file]        [sig_num]
+@localstatedir@/log/open5gs/nrf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-nrfd/pid`
+@localstatedir@/log/open5gs/pcrf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-pcrfd/pid`
+@localstatedir@/log/open5gs/hss.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-hssd/pid`
+@localstatedir@/log/open5gs/ausf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-ausfd/pid`
+@localstatedir@/log/open5gs/udm.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-udmd/pid`
+@localstatedir@/log/open5gs/udr.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-udrd/pid`
+@localstatedir@/log/open5gs/upf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-upfd/pid`
+@localstatedir@/log/open5gs/sgwc.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-sgwcd/pid`
+@localstatedir@/log/open5gs/sgwu.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-sgwud/pid`
+@localstatedir@/log/open5gs/smf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-smfd/pid`
+@localstatedir@/log/open5gs/mme.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-mmed/pid`
+@localstatedir@/log/open5gs/amf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-amfd/pid`

configs/non3gpp.yaml.in

@@ -0,0 +1,233 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+        - identity: aaa.localdomain
+          addr: 127.0.0.1
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+        - identity: aaa.localdomain
+          addr: 127.0.0.1
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/open5gs/amf.yaml.in

@@ -0,0 +1,338 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,ngap,nas,gmm,sbi,amf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/amf.log
+#
+# amf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#      - tls:
+#          key: amf.key
+#          pem: amf.pem
+#
+#  o SBI Server(https://127.0.0.5:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.5
+#        tls:
+#          key: amf.key
+#          pem: amf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://amf.open5gs.org:80)
+#    sbi:
+#      - name: amf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.5:7777)
+#    sbi:
+#      - addr: 127.0.0.5
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-amf.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  <NGAP Server>>
+#
+#  o NGAP Server(all address avaiable)
+#    ngap:
+#
+#  o NGAP Server(0.0.0.0:38412)
+#    ngap:
+#      addr: 0.0.0.0
+#
+#  o NGAP Server(127.0.0.5:38412, [::1]:38412)
+#    ngap:
+#      - addr: 127.0.0.5
+#      - addr: ::1
+#
+#  o NGAP Server(different port)
+#    ngap:
+#      - addr: 127.0.0.5
+#        port: 38413
+#
+#  o NGAP Server(address avaiable in `eth0` interface)
+#    ngap:
+#      dev: eth0
+#
+#  <GUAMI>
+#
+#  o Multiple GUAMI
+#    guami:
+#      - plmn_id:
+#          mcc: 901
+#          mnc: 70
+#        amf_id:
+#          region: 2
+#          set: 1
+#          pointer: 4
+#      - plmn_id:
+#          mcc: 001
+#          mnc: 01
+#        amf_id:
+#          region: 5
+#          set: 2
+#
+#  <TAI>
+#
+#  o Multiple TAI
+#    tai:
+#      - plmn_id:
+#          mcc: 001
+#          mnc: 01
+#        tac: [1, 2, 3]
+#    tai:
+#      - plmn_id:
+#          mcc: 002
+#          mnc: 02
+#        tac: 4
+#      - plmn_id:
+#          mcc: 003
+#          mnc: 03
+#        tac: 5
+#    tai:
+#      - plmn_id:
+#          mcc: 004
+#          mnc: 04
+#        tac: [6, 7]
+#      - plmn_id:
+#          mcc: 005
+#          mnc: 05
+#        tac: 8
+#      - plmn_id:
+#          mcc: 006
+#          mnc: 06
+#        tac: [9, 10]
+#
+#  <PLMN Support>
+#
+#  o Multiple PLMN Support
+#    plmn_support:
+#      - plmn_id:
+#          mcc: 901
+#          mnc: 70
+#        s_nssai:
+#          - sst: 1
+#            sd: 010000
+#      - plmn_id:
+#          mcc: 901
+#          mnc: 70
+#        s_nssai:
+#          - sst: 1
+#
+#  <Network Name>
+#
+#    network_name:
+#        full: Open5GS
+#        short: Next
+#
+#  <AMF Name>
+#
+#    amf_name: amf1.open5gs.amf.5gc.mnc70.mcc901.3gppnetwork.org
+#
+#  <Relative Capacity> - Default(255)
+#
+#    relative_capacity: 100
+#
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# sockopt:
+#    no_delay : true
+#
+sockopt:
+
+#
+# sctp:
+#    heartbit_interval : 5000 (5secs)
+#    sack_delay : 200 (200ms)
+#    rto_initial : 3000 (3secs)
+#    rto_min : 1000 (1sec)
+#    rto_max : 5000 (5secs)
+#    max_num_of_ostreams : 30
+#    max_num_of_istreams : 65535
+#    max_attempts : 4
+#    max_initial_timeout : 8000(8secs)
+#    usrsctp_udp_port : 9899
+#
+sctp:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+#
+#  o Handover Wait Duration (Default : 300 ms)
+#    Time to wait for AMF to send UEContextReleaseCommand
+#    to the source gNB after receiving HandoverNotify
+#
+#  o Handover Wait Duration (500ms)
+#    handover:
+#        duration: 500
+time:

configs/open5gs/ausf.yaml.in

@@ -0,0 +1,184 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/ausf.log
+#
+# ausf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#      - tls:
+#          key: ausf.key
+#          pem: ausf.pem
+#
+#  o SBI Server(https://127.0.0.11:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.11
+#        tls:
+#          key: ausf.key
+#          pem: ausf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://ausf.open5gs.org:80)
+#    sbi:
+#      - name: ausf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.11:7777)
+#    sbi:
+#      - addr: 127.0.0.11
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-ausf.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/bsf.yaml.in

@@ -0,0 +1,186 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,bsf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/bsf.log
+#
+# bsf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#      - tls:
+#          key: bsf.key
+#          pem: bsf.pem
+#
+#  o SBI Server(https://127.0.0.15:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.15
+#        tls:
+#          key: bsf.key
+#          pem: bsf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://bsf.open5gs.org:80)
+#    sbi:
+#      - name: bsf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.15:7777)
+#    sbi:
+#      - addr: 127.0.0.15
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-bsf.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/hss.yaml.in

@@ -0,0 +1,78 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,fd,hss,event,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/hss.log
+
+hss:
+    freeDiameter: @sysconfdir@/freeDiameter/hss.conf
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:

configs/open5gs/meson.build

@@ -0,0 +1,47 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+open5gs_sysconfdir = join_paths(sysconfdir, 'open5gs')
+meson.add_install_script(python3_exe, '-c',
+        mkdir_p.format(open5gs_sysconfdir))
+
+open5gs_conf = '''
+    mme.yaml
+    sgwc.yaml
+    sgwu.yaml
+    smf.yaml
+    amf.yaml
+    upf.yaml
+    hss.yaml
+    pcrf.yaml
+    nrf.yaml
+    ausf.yaml
+    udm.yaml
+    udr.yaml
+    pcf.yaml
+    nssf.yaml
+    bsf.yaml
+'''.split()
+
+foreach file : open5gs_conf
+    gen = configure_file(
+            input : file + '.in',
+            output : file,
+            configuration : conf_data)
+    meson.add_install_script(python3_exe, '-c',
+            install_conf.format(gen, open5gs_sysconfdir))
+endforeach

configs/open5gs/mme.yaml.in

@@ -0,0 +1,425 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,s1ap,nas,fd,gtp,mme,emm,esm,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/mme.log
+
+#
+# mme:
+#
+#  <S1AP Server>>
+#
+#  o S1AP Server(all address avaiable)
+#    s1ap:
+#
+#  o S1AP Server(0.0.0.0:36412)
+#    s1ap:
+#      addr: 0.0.0.0
+#
+#  o S1AP Server(127.0.0.2:36412, [::1]:36412)
+#    s1ap:
+#      - addr: 127.0.0.2
+#      - addr: ::1
+#
+#  o S1AP Server(different port)
+#    s1ap:
+#      - addr: 127.0.0.2
+#        port: 36413
+#
+#  o S1AP Server(address avaiable in `eth0` interface)
+#    s1ap:
+#      dev: eth0
+#
+#  <GTP-C Server>>
+#
+#  o GTP-C Server(all address avaiable)
+#    gtpc:
+#
+#  o GTP-C Server(127.0.0.2:2123, [::1]:2123)
+#    gtpc:
+#      - addr: 127.0.0.2
+#      - addr: ::1
+#
+#  <SGsAP>
+#
+#  o Single MSC/VLR(127.0.0.2)
+#    sgsap:
+#      addr: 127.0.0.2
+#      map:
+#        tai:
+#          plmn_id:
+#            mcc: 001
+#            mnc: 01
+#          tac: 4130
+#        lai:
+#          plmn_id:
+#            mcc: 001
+#            mnc: 01
+#          lac: 43690
+#      map:
+#        tai:
+#          plmn_id:
+#            mcc: 002
+#            mnc: 02
+#          tac: 4132
+#        lai:
+#          plmn_id:
+#            mcc: 002
+#            mnc: 02
+#          lac: 43692
+#
+#  o Multiple MSC/VLR
+#    sgsap:
+#      - addr: 127.0.0.2
+#        port: 29119
+#        map:
+#          tai:
+#            plmn_id:
+#              mcc: 001
+#              mnc: 01
+#            tac: 4131
+#          lai:
+#            plmn_id:
+#              mcc: 001
+#              mnc: 01
+#            lac: 43691
+#        map:
+#          tai:
+#            plmn_id:
+#              mcc: 002
+#              mnc: 02
+#            tac: 4132
+#          lai:
+#            plmn_id:
+#              mcc: 002
+#              mnc: 02
+#            lac: 43692
+#      - addr
+#         - 127.0.0.4
+#         - fd69:f21d:873c:fa::2
+#        map:
+#          tai:
+#            plmn_id:
+#              mcc: 001
+#              mnc: 01
+#            tac: 4132
+#          lai:
+#            plmn_id:
+#              mcc: 002
+#              mnc: 02
+#            lac: 43692
+#      - name: msc.open5gs.org
+#        map:
+#          tai:
+#            plmn_id:
+#              mcc: 001
+#              mnc: 01
+#            tac: 4133
+#          lai:
+#            plmn_id:
+#              mcc: 002
+#              mnc: 02
+#            lac: 43693
+#
+#
+#  <GUMMEI>
+#
+#  o Multiple GUMMEI
+#    gummei:
+#      - plmn_id:
+#          mcc: 001
+#          mnc: 01
+#        mme_gid: 2
+#        mme_code: 1
+#      - plmn_id:
+#          - mcc: 002
+#            mnc: 02
+#          - mcc: 003
+#            mnc: 03
+#        mme_gid: [3, 4]
+#        mme_code:
+#          - 2
+#          - 3
+#
+#
+#  <TAI>
+#
+#  o Multiple TAI
+#    tai:
+#      - plmn_id:
+#          mcc: 001
+#          mnc: 01
+#        tac: [1, 2, 3]
+#    tai:
+#      - plmn_id:
+#          mcc: 002
+#          mnc: 02
+#        tac: 4
+#      - plmn_id:
+#          mcc: 003
+#          mnc: 03
+#        tac: 5
+#    tai:
+#      - plmn_id:
+#          mcc: 004
+#          mnc: 04
+#        tac: [6, 7]
+#      - plmn_id:
+#          mcc: 005
+#          mnc: 05
+#        tac: 8
+#      - plmn_id:
+#          mcc: 006
+#          mnc: 06
+#        tac: [9, 10]
+#
+#
+#  <Network Name>
+#
+#    network_name:
+#        full: Open5GS
+#        short: Next
+#
+#  <MME Name>
+#
+#    mme_name: open5gs-mme0
+#
+#  <Relative Capacity> - Default(255)
+#
+#    relative_capacity: 100
+#
+mme:
+    freeDiameter: @sysconfdir@/freeDiameter/mme.conf
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei: 
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+    network_name:
+        full: Open5GS
+    mme_name: open5gs-mme0
+
+#
+# sgwc:
+#
+# <GTP-C Client>
+#
+#  o Specify SGW addresses the GTP-C must connect to
+#
+#  o One SGW is defined.
+#    If prefer_ipv4 is not true, [fd69:f21d:873c:fa::2] is selected.
+#    gtpc:
+#      addr:
+#        - 127.0.0.3
+#        - fd69:f21d:873c:fa::2
+#
+#  o Two SGW are defined. MME selects SGW with round-robin manner per UE
+#    gtpc:
+#      - addr: 127.0.0.3
+#      - addr: fd69:f21d:873c:fa::2
+#
+#  o Three SGW are defined. MME selects SGW with round-robin manner per UE
+#    gtpc:
+#      - addr
+#        - 127.0.0.3
+#        - fd69:f21d:873c:fa::2
+#      - addr
+#        - 127.0.0.22
+#        - fd69:f21d:873c:fa::12
+#      - name: sgw3.open5gs.org
+#
+# <SGW Selection Mode>
+#
+# o Round-Robin
+#
+#   gtpc:
+#     addr: 127.0.0.3
+#     addr: 127.0.2.2
+#     addr: 127.0.4.2
+#
+# o SGW selection by eNodeB TAC
+#   (either single TAC or multiple TACs, DECIMAL representation)
+#
+#   gtpc:
+#     - addr: 127.0.0.3
+#       tac: 26000
+#     - addr: 127.0.2.2
+#       tac: [25000, 27000, 28000]
+#
+# o SGW selection by e_cell_id(28bit)
+#   (either single or multiple e_cell_id, HEX representation)
+#
+#   gtpc:
+#     - addr: 127.0.0.3
+#       e_cell_id: abcde01
+#     - addr: 127.0.2.2
+#       e_cell_id: [12345, a9413, 98765]
+#
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+
+#
+# smf:
+#
+#  <GTP-C Client>
+#
+#  o By default, the SMF uses the first SMF node.
+#    - To use a different APN for each SMF, specify gtpc.apn as the APN name.
+#    - If the HSS uses WebUI to set the SMF IP for each UE,
+#      you can use a specific SMF node for each UE.
+#
+#  o Two SMF are defined. 127.0.0.4:2123 is used.
+#    [fd69:f21d:873c:fa::3]:2123 is ignored.
+#    gtpc:
+#      - addr: 127.0.0.4
+#      - addr: fd69:f21d:873c:fa::3
+#
+#  o One SMF is defined. if prefer_ipv4 is not true,
+#    [fd69:f21d:873c:fa::3] is selected.
+#    gtpc:
+#      - addr:
+#        - 127.0.0.4
+#        - fd69:f21d:873c:fa::3
+#
+#  o Two SMF are defined with a different APN.
+#    - Note that if SMF IP for UE is configured in HSS,
+#      the following configurion for this UE is ignored.
+#    gtpc:
+#      - addr: 127.0.0.4
+#        apn: internet
+#      - addr: 127.0.0.5
+#        apn: volte
+#
+#  o If APN is omitted, the default APN uses the first SMF node.
+#    gtpc:
+#      - addr: 127.0.0.4
+#      - addr: 127.0.0.5
+#        apn: volte
+smf:
+    gtpc:
+      - addr:
+        - 127.0.0.4
+        - ::1
+
+#
+# parameter:
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Use OAI UE
+#    - Remove HashMME in Security-mode command message
+#    - Use the length 1 of EPS network feature support in Attach accept message
+#      use_openair: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# sockopt:
+#    no_delay : true
+#
+sockopt:
+
+#
+# sctp:
+#    heartbit_interval : 5000 (5secs)
+#    sack_delay : 200 (200ms)
+#    rto_initial : 3000 (3secs)
+#    rto_min : 1000 (1sec)
+#    rto_max : 5000 (5secs)
+#    max_num_of_ostreams : 30
+#    max_num_of_istreams : 65535
+#    max_attempts : 4
+#    max_initial_timeout : 8000(8secs)
+#    usrsctp_udp_port : 9899
+#
+sctp:
+
+#
+# time:
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+#
+#  o Handover Wait Duration (Default : 300 ms)
+#    Time to wait for MME to send UEContextReleaseCommand
+#    to the source eNB after receiving HandoverNotify
+#
+#  o Handover Wait Duration (500ms)
+#    handover:
+#        duration: 500
+time:

configs/open5gs/nrf.yaml.in

@@ -0,0 +1,160 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,nrf,event,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/nrf.log
+
+#
+# nrf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:7777)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#
+#  o SBI Server(https://127.0.0.10:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://nrf.open5gs.org:80)
+#    sbi:
+#      name: nrf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.10:7777)
+#    sbi:
+#      - addr: 127.0.0.10
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      dev: eth0
+#
+nrf:
+    sbi:
+      addr:
+        - 127.0.0.10
+        - ::1
+      port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 10 seconds)
+#
+#  o NF Instance Heartbeat (Disabled)
+#    nf_instance:
+#      heartbeat: 0
+#
+#  o NF Instance Heartbeat (5 seconds)
+#    nf_instance:
+#      heartbeat: 5
+#
+#  o NF Instance Validity (Default : 3600 seconds = 1 hour)
+#
+#  o NF Instance Validity (10 seconds)
+#    nf_instance:
+#      validity: 10
+#
+#  o Subscription Validity (Default : 86400 seconds = 1 day)
+#
+#  o Subscription Validity (Disabled)
+#    subscription:
+#      validity: 0
+#
+#  o Subscription Validity (3600 seconds = 1 hour)
+#    subscription:
+#      validity: 3600
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/nssf.yaml.in

@@ -0,0 +1,234 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,nssf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/nssf.log
+#
+# nssf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#      - tls:
+#          key: nssf.key
+#          pem: nssf.pem
+#
+#  o SBI Server(https://127.0.0.14:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.14
+#        tls:
+#          key: nssf.key
+#          pem: nssf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://nssf.open5gs.org:80)
+#    sbi:
+#      - name: nssf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.14:7777)
+#    sbi:
+#      - addr: 127.0.0.14
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-nssf.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  <List of avaiable Network Slice Instance(NSI)>
+#
+#  o One NSI
+#   - NRF[http://::1:7777/nnrf-nfm/v1/nf-instances]
+#     NSSAI[SST:1]
+#
+#    nsi:
+#      - addr: ::1
+#        port: 7777
+#        s_nssai:
+#          sst: 1
+#
+#  o Three NSI
+#   1. NRF[http://::1:7777/nnrf-nfm/v1/nf-instances]
+#      S-NSSAI[SST:1]
+#
+#   2. NRF[http://127.0.0.19:7777/nnrf-nfm/v1/nf-instances]
+#      NSSAI[SST:1, SD:000080]
+#
+#   2. NRF[http://127.0.0.10:7777/nnrf-nfm/v1/nf-instances]
+#      NSSAI[SST:1, SD:009000]
+#
+#    nsi:
+#      - addr: ::1
+#        port: 7777
+#        s_nssai:
+#          sst: 1
+#      - addr: 127.0.0.19
+#        port: 7777
+#        s_nssai:
+#          sst: 1
+#          sd: 000080
+#      - addr: 127.0.0.10
+#        port: 7777
+#        s_nssai:
+#          sst: 1
+#          sd: 009000
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o NF Instance Heartbeat (Disabled)
+#    nf_instance:
+#      heartbeat: 0
+#
+#  o NF Instance Heartbeat (10 seconds)
+#    nf_instance:
+#      heartbeat: 10
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/pcf.yaml.in

@@ -0,0 +1,186 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,pcf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/pcf.log
+#
+# pcf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#      - tls:
+#          key: pcf.key
+#          pem: pcf.pem
+#
+#  o SBI Server(https://127.0.0.13:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.13
+#        tls:
+#          key: pcf.key
+#          pem: pcf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://pcf.open5gs.org:80)
+#    sbi:
+#      - name: pcf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.13:7777)
+#    sbi:
+#      - addr: 127.0.0.13
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-pcf.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/pcrf.yaml.in

@@ -0,0 +1,82 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,fd,pcrf,event,mem,sock
+logger:
+    file: @localstatedir@/log/open5gs/pcrf.log
+
+pcrf:
+    freeDiameter: @sysconfdir@/freeDiameter/pcrf.conf
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Legacy support for pre-release LTE 11 devices to do calling
+#    - Replace IPv4/v6 local addr field in AAR Media-Subcomponent AVP
+#      by 'any local port'
+#      no_ipv4v6_local_addr_in_packet_filter: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:

configs/open5gs/sgwc.yaml.in

@@ -0,0 +1,171 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,pfcp,gtp,sgwc,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/sgwc.log
+
+#
+# sgwc:
+#
+#  <GTP-C Server>
+#
+#  o GTP-C Server(127.0.0.3:2123, [fd69:f21d:873c:fa::2]:2123)
+#    gtpc:
+#      addr:
+#        - 127.0.0.3
+#        - fd69:f21d:873c:fa::2
+#
+#  o On SGW, Same Configuration(127.0.0.3:2123,
+#  [fd69:f21d:873c:fa::2]:2123) as below.
+#    gtpc:
+#      - addr: 127.0.0.3
+#      - addr: fd69:f21d:873c:fa::2
+#
+#  <PFCP Server>
+#
+#  o PFCP Server(127.0.0.3:8805, ::1:8805)
+#    pfcp:
+#      - addr: 127.0.0.3
+#      - addr: ::1
+#
+#  o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+#    pfcp:
+#      name: localhost
+#
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+#
+# sgwu:
+#
+#  <PFCP Client>>
+#
+#  o PFCP Client(127.0.0.6:8805)
+#
+#    pfcp:
+#      addr: 127.0.0.6
+#
+#  <SGWU_SELECTION_MODE - EPC only>
+#
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#      - addr: 127.0.0.12
+#      - addr: 127.0.0.18
+#
+# o SGWU selection by eNodeB TAC
+#   (either single TAC or multiple TACs, DECIMAL representation)
+#
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#        tac: 1
+#      - addr: 127.0.0.12
+#        tac: [3,5,8]
+#
+# o SGWU selection by UE's APN (either single APN or multiple APNs)
+#
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#        apn: ims
+#      - addr: 127.0.0.12
+#        apn: [internet, web]
+#
+# o SGWU selection by CellID(e_cell_id: 28bit)
+#   (either single e_cell_id or multiple e_cell_id, HEX representation)
+#
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#        e_cell_id: 463
+#      - addr: 127.0.0.12
+#        e_cell_id: [123456789, 9413]
+#
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Disable selection of SGW-U PFCP in Round-Robin manner
+#      no_pfcp_rr_select: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/sgwu.yaml.in

@@ -0,0 +1,160 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,pfcp,gtp,sgwu,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/sgwu.log
+
+#
+# sgwu:
+#
+#  <PFCP Server>
+#
+#  o PFCP Server(127.0.0.6:8805, ::1:8805)
+#    pfcp:
+#      - addr: 127.0.0.6
+#      - addr: ::1
+#
+#  o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+#    pfcp:
+#      - name: localhost
+#
+#  <GTP-U Server>
+#
+#  o GTP-U Server(127.0.0.6:2152, [::1]:2152)
+#    gtpu:
+#      - addr: 127.0.0.6
+#      - addr: ::1
+#
+#  o GTP-U Server(127.0.0.1:2152, [::1]:2152)
+#    gtpu:
+#      - name: localhost
+#
+#  o User Plane IP Resource information
+#    gtpu:
+#      - addr:
+#        - 127.0.0.6
+#        - ::1
+#        teid_range_indication: 4
+#        teid_range: 10
+#        network_instance: internet
+#        source_interface: 0
+#      - addr: 127.0.10.4
+#        teid_range_indication: 4
+#        teid_range: 5
+#        network_instance: ims
+#        source_interface: 1
+#
+#  o Provide custom SGW-U GTP-U address to be advertised inside S1AP messages
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise: 172.24.15.30
+#
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise:
+#        - 127.0.0.1
+#        - ::1
+#
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise: sgw1.epc.mnc001.mcc001.3gppnetwork.org
+#
+#    gtpu:
+#      - dev: ens3
+#        advertise: sgw1.epc.mnc001.mcc001.3gppnetwork.org
+#
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+#
+# sgwc:
+#
+#  <PFCP Client>>
+#
+#  o PFCP Client(127.0.0.3:8805)
+#
+#    pfcp:
+#      addr: 127.0.0.3
+#
+sgwc:
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/smf.yaml.in

@@ -0,0 +1,525 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,pfcp,fd,pfcp,gtp,smf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/smf.log
+#
+# smf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#      - tls:
+#          key: smf.key
+#          pem: smf.pem
+#
+#  o SBI Server(https://127.0.0.4:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.4
+#        tls:
+#          key: smf.key
+#          pem: smf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://smf.open5gs.org:80)
+#    sbi:
+#      - name: smf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.4:7777)
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-smf.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  <PFCP Server>
+#
+#  o PFCP Server(127.0.0.4:8805, ::1:8805)
+#    pfcp:
+#      - addr: 127.0.0.4
+#      - addr: ::1
+#
+#  o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+#    pfcp:
+#      name: localhost
+#
+#  <GTP-C Server>
+#
+#  o GTP-C Server(127.0.0.4:2123, [fd69:f21d:873c:fa::3]:2123)
+#    gtpc:
+#      addr:
+#        - 127.0.0.4
+#        - fd69:f21d:873c:fa::3
+#
+#  o On SMF, Same configuration
+#    (127.0.0.4:2123, [fd69:f21d:873c:fa::3]:2123).
+#    gtpc:
+#      - addr: 127.0.0.4
+#      - addr: fd69:f21d:873c:fa::3
+#
+#  <GTP-U Server>>
+#
+#  o GTP-U Server(127.0.0.4:2152, [::1]:2152)
+#    gtpu:
+#      - addr: 127.0.0.4
+#      - addr: ::1
+#
+#  o GTP-U Server(127.0.0.1:2152, [::1]:2152)
+#    gtpu:
+#      name: localhost
+#
+#  <Subnet for UE Pool>
+#
+#  o IPv4 Pool
+#    subnet:
+#      addr: 10.45.0.1/16
+#
+#  o IPv4/IPv6 Pool
+#    subnet:
+#      - addr: 10.45.0.1/16
+#      - addr: 2001:230:cafe::1/48
+#
+#
+#  o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, 2001:230:babe::1/48
+#    ; If the UE has unknown DNN/APN(not internet/ims), SMF/UPF will crash.
+#
+#    subnet:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: 2001:230:cafe::1/48
+#        dnn: internet
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#      - addr: 2001:230:babe::1/48
+#        dnn: ims
+#
+#  o Specific DNN/APN with the FALLBACK SUBNET(10.47.0.1/16)
+#    ; Note that put the FALLBACK SUBNET last to avoid SMF/UPF crash.
+#
+#    subnet:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#      - addr: 10.50.0.1/16 ## FALLBACK SUBNET
+#
+#  o Pool Range Sample
+#    subnet:
+#      - addr: 10.45.0.1/24
+#        range: 10.45.0.100-10.45.0.200
+#
+#    subnet:
+#      - addr: 10.45.0.1/24
+#        range:
+#          - 10.45.0.5-10.45.0.50
+#          - 10.45.0.100-
+#
+#    subnet:
+#      - addr: 10.45.0.1/24
+#        range:
+#          - -10.45.0.200
+#          - 10.45.0.210-10.45.0.220
+#
+#    subnet:
+#      - addr: 10.45.0.1/16
+#        range:
+#          - 10.45.0.100-10.45.0.200
+#          - 10.45.1.100-10.45.1.200
+#      - addr: 2001:230:cafe::1/48
+#        range:
+#          - 2001:230:cafe:a0::0-2001:230:cafe:b0::0
+#          - 2001:230:cafe:c0::0-2001:230:cafe:d0::0
+#
+#  <Domain Name Server>
+#
+#  o Primary/Secondary can be configured. Others are ignored.
+#
+#    dns:
+#      - 8.8.8.8
+#      - 8.8.4.4
+#      - 2001:4860:4860::8888
+#      - 2001:4860:4860::8844
+#
+#  <MTU Size>
+#
+#  o Provisioning a limit on the size of the packets sent by the MS
+#    to avoid packet fragmentation in the backbone network
+#    between the MS and the GGSN/PGW and/or across the (S)Gi reference point)
+#    when some of the backbone links does not support
+#    packets larger then 1500 octets
+#
+#  <P-CSCF>
+#
+#  o Proxy Call Session Control Function
+#
+#    p-cscf:
+#      - 127.0.0.1
+#      - ::1
+#
+#  <SMF Selection - 5G Core only>
+#  1. SMF sends SmfInfo(S-NSSAI, DNN, TAI) to the NRF
+#  2. NRF responds to AMF with SmfInfo during NF-Discovery.
+#  3. AMF selects SMF based on S-NSSAI, DNN and TAI in SmfInfo.
+#
+#  Note that if there is no SmfInfo, any AMF can select this SMF.
+#
+#  o S-NSSAI[SST:1] and DNN[internet] - At least 1 DNN is required in S-NSSAI
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            dnn:
+#              - internet
+#
+#  o S-NSSAI[SST:1 SD:009000] and DNN[internet or ims]
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            sd: 009000
+#            dnn:
+#              - internet
+#              - ims
+#
+#  o S-NSSAI[SST:1] and DNN[internet] and TAI[PLMN-ID:90170 TAC:1]
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            tac: 1
+#
+#  o If any of conditions below are met:
+#   - S-NSSAI[SST:1] and DNN[internet] and TAI[PLMN-ID:90170 TAC:1-9]
+#   - S-NSSAI[SST:2 SD:000080] and DNN[internet or ims]
+#   - S-NSSAI[SST:4] and DNN[internet] and TAI[PLMN-ID:90170 TAC:10-20,30-40]
+#
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            range:
+#              - 1-9
+#      - s_nssai:
+#          - sst: 2
+#            sd: 000080
+#            dnn:
+#              - internet
+#              - ims
+#      - s_nssai:
+#          - sst: 4
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            range:
+#              - 10-20
+#              - 30-40
+#
+#  o Complex Example
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            dnn:
+#              - internet
+#          - sst: 1
+#            sd: 000080
+#            dnn:
+#              - internet
+#              - ims
+#          - sst: 1
+#            sd: 009000
+#            dnn:
+#              [internet, ims]
+#          - sst: 2
+#            dnn:
+#              - internet
+#          - sst: 3
+#            sd: 123456
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            tac: [1, 2, 3]
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            tac: 4
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            tac:
+#              - 5
+#              - 6
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            range:
+#              - 100-200
+#              - 300-400
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            range:
+#              - 500-600
+#              - 700-800
+#              - 900-1000
+#      - s_nssai:
+#          - sst: 4
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            tac: 99
+# 
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter: @sysconfdir@/freeDiameter/smf.conf
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.1:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# upf:
+#
+#  <PFCP Client>>
+#
+#  o PFCP Client(127.0.0.7:8805)
+# 
+#    pfcp:
+#      addr: 127.0.0.7
+#
+#  <UPF Selection>
+#
+#  o Round-Robin
+#    (note that round robin can be disabled for a particular node
+#     by setting flag 'rr' to 0)
+#
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#      - addr: 127.0.0.12
+#        rr: 0
+#      - addr: 127.0.0.19
+#
+#  o UPF selection by eNodeB TAC
+#    (either single TAC or multiple TACs, DECIMAL representation)
+#
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#        tac: 1
+#      - addr: 127.0.0.12
+#        tac: [3,5,8]
+#
+#  o UPF selection by UE's DNN/APN (either single DNN/APN or multiple DNNs/APNs)
+#
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#        dnn: ims
+#      - addr: 127.0.0.12
+#        dnn: [internet, web]
+#
+#  o UPF selection by CellID(e_cell_id: 28bit, nr_cell_id: 36bit)
+#    (either single enb_id or multiple enb_ids, HEX representation)
+#
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#        e_cell_id: 463
+#      - addr: 127.0.0.12
+#        nr_cell_id: [123456789, 9413]
+#
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Disable selection of UPF PFCP in Round-Robin manner
+#      no_pfcp_rr_select: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+#
+#  o Handover Wait Duration (Default : 300 ms)
+#    Time to wait for SMF to send
+#    PFCP Session Modification Request(Remove Indirect Tunnel) to the UPF
+#    after sending Nsmf_PDUSession_UpdateSMContext Response(hoState:COMPLETED)
+#
+#  o Handover Wait Duration (500ms)
+#    handover:
+#        duration: 500
+time:

configs/open5gs/udm.yaml.in

@@ -0,0 +1,184 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,udm,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/udm.log
+#
+# udm:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#      - tls:
+#          key: udm.key
+#          pem: udm.pem
+#
+#  o SBI Server(https://127.0.0.12:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.12
+#        tls:
+#          key: udm.key
+#          pem: udm.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://udm.open5gs.org:80)
+#    sbi:
+#      - name: udm.open5gs.org
+#
+#  o SBI Server(http://127.0.0.12:7777)
+#    sbi:
+#      - addr: 127.0.0.12
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-udm.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/udr.yaml.in

@@ -0,0 +1,194 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,udr,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/udr.log
+#
+# udr:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#      - tls:
+#          key: udr.key
+#          pem: udr.pem
+#
+#  o SBI Server(https://127.0.0.20:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.20
+#        tls:
+#          key: udr.key
+#          pem: udr.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://udr.open5gs.org:80)
+#    sbi:
+#      - name: udr.open5gs.org
+#
+#  o SBI Server(http://127.0.0.20:7777)
+#    sbi:
+#      - addr: 127.0.0.20
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-udr.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o NF Instance Heartbeat (Disabled)
+#    nf_instance:
+#      heartbeat: 0
+#
+#  o NF Instance Heartbeat (10 seconds)
+#    nf_instance:
+#      heartbeat: 10
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/upf.yaml.in

@@ -0,0 +1,231 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,pfcp,gtp,upf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/upf.log
+
+#
+# upf:
+#
+#  <PFCP Server>
+#
+#  o PFCP Server(127.0.0.7:8805, ::1:8805)
+#    pfcp:
+#      - addr: 127.0.0.7
+#      - addr: ::1
+#
+#  o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+#    pfcp:
+#      name: localhost
+#
+#  <GTP-U Server>>
+#
+#  o GTP-U Server(127.0.0.7:2152, [::1]:2152)
+#    gtpu:
+#      - addr: 127.0.0.7
+#      - addr: ::1
+#
+#  o GTP-U Server(127.0.0.1:2152, [::1]:2152)
+#    gtpu:
+#      name: localhost
+#
+#  o User Plane IP Resource information
+#    gtpu:
+#      - addr:
+#        - 127.0.0.7
+#        - ::1
+#        teid_range_indication: 4
+#        teid_range: 10
+#        network_instance: internet
+#        source_interface: 0
+#      - addr: 127.0.10.4
+#        teid_range_indication: 4
+#        teid_range: 5
+#        network_instance: ims
+#        source_interface: 1
+#
+#  o Provide custom UPF GTP-U address to be advertised inside NGAP messages
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise: 172.24.15.30
+#
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise:
+#        - 127.0.0.1
+#        - ::1
+#
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise: upf1.5gc.mnc001.mcc001.3gppnetwork.org
+#
+#    gtpu:
+#      - dev: ens3
+#        advertise: upf1.5gc.mnc001.mcc001.3gppnetwork.org
+#
+#  <Subnet for UE network>
+#
+#  Note that you need to setup your UE network using TUN device.
+#  (ogstun, ogstun2, ogstunX, ..)
+#
+#  o IPv4 Pool
+#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#
+#    subnet:
+#      addr: 10.45.0.1/16
+#
+#  o IPv4/IPv6 Pool
+#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#    $ sudo ip addr add 2001:230:cafe::1/48 dev ogstun
+#
+#    subnet:
+#      - addr: 10.45.0.1/16
+#      - addr: 2001:230:cafe::1/48
+#
+#
+#  o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, 2001:230:babe::1/48
+#    All other APNs use 10.45.0.1/16, 2001:230:cafe::1/48
+#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#    $ sudo ip addr add 10.46.0.1/16 dev ogstun
+#    $ sudo ip addr add 2001:230:cafe::1/48 dev ogstun
+#    $ sudo ip addr add 2001:230:babe::1/48 dev ogstun
+#
+#    ; If the UE has unknown DNN/APN(not internet/ims), SMF/UPF will crash.
+#
+#    subnet:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: 2001:230:cafe::1/48
+#        dnn: internet
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#      - addr: 2001:230:babe::1/48
+#        dnn: ims
+#
+#  o Specific DNN/APN with the FALLBACK SUBNET(10.47.0.1/16)
+#    ; Note that put the FALLBACK SUBNET last to avoid SMF/UPF crash.
+#
+#    subnet:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#      - addr: 10.50.0.1/16 ## FALLBACK SUBNET
+#
+#  o Multiple Devices (default: ogstun)
+#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#    $ sudo ip addr add 2001:230:cafe::1/48 dev ogstun2
+#    $ sudo ip addr add 10.46.0.1/16 dev ogstun3
+#    $ sudo ip addr add 2001:230:babe::1/48 dev ogstun3
+#
+#    subnet:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: 2001:230:cafe::1/48
+#        dnn: internet
+#        dev: ogstun2
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#        dev: ogstun3
+#      - addr: 2001:230:babe::1/48
+#        dnn: ims
+#        dev: ogstun3
+#
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+
+#
+# smf:
+#
+#  <PFCP Client>>
+#
+#  o PFCP Client(127.0.0.4:8805)
+#
+#    pfcp:
+#      addr: 127.0.0.4
+#
+smf:
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/sample.yaml.in

@@ -0,0 +1,229 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/slice.yaml.in

@@ -0,0 +1,244 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        amf_id:
+          region: 202
+          set: 1016
+    tai:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        s_nssai:
+          - sst: 1
+          - sst: 1
+            sd: 000080
+          - sst: 1
+            sd: 009000
+    security:
+        integrity_order : [ NIA2, NIA1 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+      - addr: 127.0.0.19
+        port: 7777
+        s_nssai:
+          sst: 1
+          sd: 000080
+      - addr: 127.0.0.10
+        port: 7777
+        s_nssai:
+          sst: 1
+          sd: 009000
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/srslte.yaml.in

@@ -0,0 +1,230 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.1.100
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 7
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+#nrf:
+#    sbi:
+#      - addr:
+#        - 127.0.0.10
+#        - ::1
+#        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/systemd/99-open5gs.netdev

@@ -0,0 +1,3 @@
+[NetDev]
+Name=ogstun
+Kind=tun

configs/systemd/99-open5gs.network

@@ -0,0 +1,6 @@
+[Match]
+Name=ogstun
+
+[Network]
+Address=10.45.0.1/16
+Address=2001:230:cafe::1/48

configs/systemd/meson.build

@@ -0,0 +1,53 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+systemd_conf_in = '''
+    open5gs-mmed.service
+    open5gs-sgwcd.service
+    open5gs-smfd.service
+    open5gs-amfd.service
+    open5gs-sgwud.service
+    open5gs-upfd.service
+    open5gs-hssd.service
+    open5gs-pcrfd.service
+    open5gs-nrfd.service
+    open5gs-ausfd.service
+    open5gs-udmd.service
+    open5gs-pcfd.service
+    open5gs-nssfd.service
+    open5gs-bsfd.service
+    open5gs-udrd.service
+'''.split()
+
+foreach file : systemd_conf_in
+    configure_file(
+            input : file + '.in',
+            output : file,
+            configuration : conf_data)
+endforeach
+
+systemd_conf = '''
+    99-open5gs.netdev
+    99-open5gs.network        
+'''.split()
+
+foreach file : systemd_conf
+    configure_file(
+            input : file,
+            output : file,
+            configuration : conf_data)
+endforeach

configs/systemd/open5gs-amfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS AMF Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-amfd -c @sysconfdir@/open5gs/amf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-ausfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS AUSF Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-ausfd -c @sysconfdir@/open5gs/ausf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-bsfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS BSF Daemon
+Wants=mongodb.service mongod.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-bsfd -c @sysconfdir@/open5gs/bsf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-hssd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS HSS Daemon
+Wants=mongodb.service mongod.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-hssd -c @sysconfdir@/open5gs/hss.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-mmed.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS MME Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-mmed -c @sysconfdir@/open5gs/mme.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-nrfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS NRF Daemon
+Wants=mongodb.service mongod.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-nrfd -c @sysconfdir@/open5gs/nrf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-nssfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS NSSF Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-nssfd -c @sysconfdir@/open5gs/nssf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-pcfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS PCF Daemon
+Wants=mongodb.service mongod.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-pcfd -c @sysconfdir@/open5gs/pcf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-pcrfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS PCRF Daemon
+Wants=mongodb.service mongod.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-pcrfd -c @sysconfdir@/open5gs/pcrf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-sgwcd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS SGW-C Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-sgwcd -c @sysconfdir@/open5gs/sgwc.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-sgwud.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS SGW-U Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-sgwud -c @sysconfdir@/open5gs/sgwu.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-smfd.service.in

@@ -0,0 +1,19 @@
+[Unit]
+Description=Open5GS SMF Daemon
+After=networking.service
+Requires=systemd-networkd.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-smfd -c @sysconfdir@/open5gs/smf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-udmd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS UDM Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-udmd -c @sysconfdir@/open5gs/udm.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-udrd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS UDR Daemon
+Wants=mongodb.service mongod.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-udrd -c @sysconfdir@/open5gs/udr.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-upfd.service.in

@@ -0,0 +1,19 @@
+[Unit]
+Description=Open5GS UPF Daemon
+After=networking.service
+Requires=systemd-networkd.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-upfd -c @sysconfdir@/open5gs/upf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/volte.yaml.in

@@ -0,0 +1,237 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 001
+        mnc: 01
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 001
+        mnc: 01
+      tac: 12345
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    p-cscf:
+      - 127.0.0.1
+      - ::1
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 001
+          mnc: 01
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 001
+          mnc: 01
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 001
+          mnc: 01
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+        - identity: ims.localdomain
+          addr: 127.0.0.1
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+        - identity: ims.localdomain
+          addr: 127.0.0.1
+
+#nrf:
+#    sbi:
+#      - addr:
+#        - 127.0.0.10
+#        - ::1
+#        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/vonr.yaml.in

@@ -0,0 +1,240 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    p-cscf:
+      - 127.0.0.1
+      - ::1
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:230:cafe::1/48
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+        - identity: pcscf.localdomain
+          addr: 127.0.0.1
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+af:
+    sbi:
+      - addr: 127.0.0.16
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configure.ac

@@ -1,374 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-dnl
-dnl This file is free software; as a special exception the author gives
-dnl unlimited permission to copy and/or distribute it, with or without
-dnl modifications, as long as this notice is preserved.
-dnl
-dnl This program is distributed in the hope that it will be useful, but
-dnl WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
-dnl implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-AC_INIT([NEXTEPC], [0.1.0], [acetcom@gmail.com])
-
-CORE_CONFIG_NICE(config.nice)
-
-dnl Must come before AM_INIT_AUTOMAKE.
-AC_CONFIG_AUX_DIR([build-aux])
-AM_INIT_AUTOMAKE([1.10 -Wall -Werror foreign])
-
-# Minimum Autoconf version required.
-AC_PREREQ(2.63)
-
-# Where to generate output; srcdir location.
-AC_CONFIG_HEADERS([config.h:config.in])dnl Keep filename to 8.3 for MS-DOS.
-AC_CONFIG_SRCDIR([main.c])
-AC_CANONICAL_HOST
-
-case $host in
-    *linux*)
-        OSDIR="unix"
-        OSCPPFLAGS="-DLINUX=1"
-        IPFW_CPPFLAGS="-DNEED_SYSCTLBYNAME -DNEED_SIN_LEN"
-        ;;
-    *-apple-darwin*)
-        OSDIR="unix"
-        OSPPCFLAGS="-DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK"
-        ;;
-    *)
-        OSDIR="unix"
-        ;;
-esac
-AC_SUBST(OSCPPFLAGS)
-AC_SUBST(OSDIR)
-AC_SUBST(IPFW_CPPFLAGS)
-
-AH_TOP([
-#ifndef __NEXTEPC_CONFIG_H__
-#define __NEXTEPC_CONFIG_H__
-/* need this, because some autoconf tests rely on this (e.g. stpcpy)
- * and it should be used for new programs  */
-#define _DEFAULT_SOURCE 1
-#define _BSD_SOURCE  	1
-])
-
-AH_BOTTOM([
-#endif /* __NEXTEPC_CONFIG_H__ */
-])
-
-AH_VERBATIM([_REENTRANT],
-[/* To allow the use of core in multithreaded programs we have to use
-    special features from the library. */
-#ifndef _REENTRANT
-# define _REENTRANT 1
-#endif
-])
-
-dnl Checks CC and freinds
-AC_PROG_CC
-AC_PROG_CPP
-AC_PROG_INSTALL
-AC_PROG_AWK
-AC_PROG_SED
-#AC_PROG_YACC
-#AC_PROG_LEX
-AM_PROG_AR
-
-dnl libtool
-LT_INIT
-
-dnl Checks for compile flag
-AX_CHECK_COMPILE_FLAG([-Wno-unused-result], [CFLAGS="$CFLAGS -Wno-unused-result"])
-
-dnl Checks for pointer size
-AC_CHECK_SIZEOF(void*, 4)
-
-dnl Checks for integer size
-AC_CHECK_SIZEOF(char, 1)
-AC_CHECK_SIZEOF(int, 4)
-AC_CHECK_SIZEOF(long, 4)
-AC_CHECK_SIZEOF(short, 2)
-AC_CHECK_SIZEOF(long long, 8)
-
-if test "$ac_cv_sizeof_short" = "2"; then
-    short_value=short
-fi
-if test "$ac_cv_sizeof_int" = "4"; then
-    int_value=int
-fi
-# Now we need to find what c_int64_t (sizeof == 8) will be.
-# The first match is our preference.
-if test "$ac_cv_sizeof_int" = "8"; then
-    int64_literal='#define C_INT64_C(val) (val)'
-    uint64_literal='#define C_UINT64_C(val) (val##U)'
-    int64_t_fmt='#define C_INT64_T_FMT "d"'
-    uint64_t_fmt='#define C_UINT64_T_FMT "u"'
-    uint64_t_hex_fmt='#define C_UINT64_T_HEX_FMT "x"'
-    int64_value="int"
-    long_value=int
-    int64_strfn="strtoi"
-elif test "$ac_cv_sizeof_long" = "8"; then
-    int64_literal='#define C_INT64_C(val) (val##L)'
-    uint64_literal='#define C_UINT64_C(val) (val##UL)'
-    int64_t_fmt='#define C_INT64_T_FMT "ld"'
-    uint64_t_fmt='#define C_UINT64_T_FMT "lu"'
-    uint64_t_hex_fmt='#define C_UINT64_T_HEX_FMT "lx"'
-    int64_value="long"
-    long_value=long
-    int64_strfn="strtol"
-elif test "$ac_cv_sizeof_long_long" = "8"; then
-    int64_literal='#define C_INT64_C(val) (val##LL)'
-    uint64_literal='#define C_UINT64_C(val) (val##ULL)'
-    # Linux, Solaris, FreeBSD all support ll with printf.
-    # BSD 4.4 originated 'q'.  Solaris is more popular and
-    # doesn't support 'q'.  Solaris wins.  Exceptions can
-    # go to the OS-dependent section.
-    int64_t_fmt='#define C_INT64_T_FMT "lld"'
-    uint64_t_fmt='#define C_UINT64_T_FMT "llu"'
-    uint64_t_hex_fmt='#define C_UINT64_T_HEX_FMT "llx"'
-    int64_value="long long"
-    long_value="long long"
-    int64_strfn="strtoll"
-elif test "$ac_cv_sizeof_longlong" = "8"; then
-    int64_literal='#define C_INT64_C(val) (val##LL)'
-    uint64_literal='#define C_UINT64_C(val) (val##ULL)'
-    int64_t_fmt='#define C_INT64_T_FMT "qd"'
-    uint64_t_fmt='#define C_UINT64_T_FMT "qu"'
-    uint64_t_hex_fmt='#define C_UINT64_T_HEX_FMT "qx"'
-    int64_value="__int64"
-    long_value="__int64"
-    int64_strfn="strtoll"
-else
-    # int64_literal may be overriden if your compiler thinks you have
-    # a 64-bit value but CORE does not agree.
-    AC_ERROR([could not detect a 64-bit integer type])
-fi
-
-AC_SUBST(short_value)
-AC_SUBST(int_value)
-AC_SUBST(long_value)
-AC_SUBST(int64_value)
-AC_SUBST(int64_t_fmt)
-AC_SUBST(uint64_t_fmt)
-AC_SUBST(uint64_t_hex_fmt)
-AC_SUBST(int64_literal)
-AC_SUBST(uint64_literal)
-
-AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
-        [`echo $PACKAGE_VERSION | $SED 's/^\([[^\.]]\+\)\.\([[^\.]]\+\)\.\([[^\.]]\+\).*/\1/'`],
-        [Major version of this package])
-AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
-        [`echo $PACKAGE_VERSION | $SED 's/^\([[^\.]]\+\)\.\([[^\.]]\+\)\.\([[^\.]]\+\).*/\2/'`],
-        [Minor version of this package])
-AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL],
-        [`echo $PACKAGE_VERSION | $SED 's/^\([[^\.]]\+\)\.\([[^\.]]\+\)\.\([[^\.]]\+\).*/\3/'`],
-        [Patch version of this package])
-
-##################################
-#### Checks for header files. ####
-##################################
-
-AC_HEADER_STDC
-AC_CHECK_HEADERS( \
-    arpa/inet.h \
-    ctype.h \
-    errno.h \
-    fcntl.h \
-    ifaddrs.h \
-    limits.h \
-    netdb.h \
-    pthread.h \
-    regex.h \
-    semaphore.h \
-    signal.h \
-    stdarg.h \
-    stdio.h \
-    stdint.h \
-    stdlib.h \
-    string.h \
-    strings.h \
-    time.h \
-    unistd.h \
-    net/if_dl.h \
-    net/if.h \
-    netinet/ether.h \
-    netinet/in.h \
-    netinet/ip.h \
-    netinet/udp.h \
-    netinet/tcp.h \
-    netinet/sctp.h \
-    sys/ioctl.h \
-    sys/param.h \
-    sys/socket.h \
-    sys/stat.h \
-    sys/syslimits.h \
-    sys/types.h \
-    sys/time.h \
-    sys/wait.h \
-    sys/uio.h \
-)
-
-##########################################
-#### Checks for typedefs, structures, ####
-####  and compiler characteristics.   ####
-##########################################
-
-AC_C_BIGENDIAN
-
-AC_CHECK_MEMBERS([struct tm.tm_gmtoff, struct tm.__tm_gmtoff],,,[
-#include <sys/types.h>
-#include <time.h>])
-
-AC_CHECK_FILE(/dev/random,
-    AC_DEFINE([HAVE_DEV_RANDOM], [1],
-        [Define to 1 if you have the /dev/random file.]))
-
-AC_CACHE_CHECK([whether the compiler provides atomic builtins], [ap_cv_atomic_builtins],
-[AC_TRY_RUN([
-int main()
-{
-    unsigned long val = 1010, tmp, *mem = &val;
-
-    if (__sync_fetch_and_add(&val, 1010) != 1010 || val != 2020)
-        return 1;
-
-    tmp = val;
-
-    if (__sync_fetch_and_sub(mem, 1010) != tmp || val != 1010)
-        return 1;
-
-    if (__sync_sub_and_fetch(&val, 1010) != 0 || val != 0)
-        return 1;
-
-    tmp = 3030;
-
-    if (__sync_val_compare_and_swap(mem, 0, tmp) != 0 || val != tmp)
-        return 1;
-
-    if (__sync_lock_test_and_set(&val, 4040) != 3030)
-        return 1;
-
-    mem = &tmp;
-
-    if (__sync_val_compare_and_swap(&mem, &tmp, &val) != &tmp)
-        return 1;
-
-    __sync_synchronize();
-
-    if (mem != &val)
-        return 1;
-
-    return 0;
-}], [ap_cv_atomic_builtins=yes], [ap_cv_atomic_builtins=no], [ap_cv_atomic_builtins=no])])
-
-if test "$ap_cv_atomic_builtins" = "yes"; then
-    AC_DEFINE(HAVE_ATOMIC_BUILTINS, 1, [Define if compiler provides atomic builtins])
-fi
-
-#######################################
-#### Checks for library functions. ####
-#######################################
-
-AC_FUNC_VPRINTF
-AC_CHECK_FUNCS(\
-    atexit \
-    gettimeofday \
-    inet_ntop \
-    inet_pton \
-    inet_aton \
-    memmove \
-    sigaction \
-    sigwait \
-    sigsuspend \
-    stpcpy \
-    strcasecmp \
-    strtoul \
-    stricmp \
-    strerror \
-    writev \
-    utime \
-    utimes \
-    sem_timedwait \
-    pthread_yield \
-    sched_yield \
-)
-
-AC_CHECK_LIB([pthread], [pthread_mutex_init], [LIBS="${LIBS} -lpthread"])
-AC_CHECK_LIB([dl], [dlopen], [LIBS="${LIBS} -ldl"])
-AC_CHECK_LIB([sctp], [sctp_sendmsg], [LIBS="${LIBS} -lsctp"])
-AC_CHECK_LIB([gnutls], [gnutls_global_init], [LIBS="${LIBS} -lgnutls"])
-AC_CHECK_LIB([gcrypt], [gcry_control], [LIBS="${LIBS} -lgcrypt"])
-AC_CHECK_LIB([idn], [idna_strerror], [LIBS="${LIBS} -lidn"])
-#AC_CHECK_LIB([fdcore], [fd_core_initialize], [LIBS="${LIBS} -lfdcore"])
-#AC_CHECK_LIB([fdproto], [fd_libproto_init], [LIBS="${LIBS} -lfdproto"])
-
-PKG_CHECK_MODULES([MONGOC], libmongoc-1.0 >= 1.3.1)
-LIBS="$LIBS $MONGOC_LIBS"
-#PKG_CHECK_MODULES([LIBXML2], libxml-2.0 >= 2.9.1)
-#LIBS="$LIBS $LIBXML2_LIBS"
-FREEDIAMETER_DIR=freeDiameter-1.2.1
-AC_SUBST(FREEDIAMETER_DIR)
-
-#####################
-#### Conclusion. ####
-#####################
-
-AC_CONFIG_SUBDIRS([lib/freeDiameter-1.2.1])
-
-AC_CONFIG_FILES([lib/core/include/core.h])
-AC_CONFIG_FILES([lib/core/src/Makefile])
-case $host in
-   *)
-       AC_CONFIG_FILES([lib/core/src/unix/Makefile])
-       ;;
-esac
-AC_CONFIG_FILES([lib/core/test/Makefile])
-AC_CONFIG_FILES([lib/core/Makefile])
-AC_CONFIG_FILES([lib/logger/Makefile])
-AC_CONFIG_FILES([lib/base/Makefile])
-AC_CONFIG_FILES([lib/s1ap/asn1c/Makefile])
-AC_CONFIG_FILES([lib/s1ap/Makefile])
-AC_CONFIG_FILES([lib/nas/Makefile])
-AC_CONFIG_FILES([lib/fd/extensions/dbg_msg_dumps/Makefile])
-#AC_CONFIG_FILES([lib/fd/extensions/dict_legacy_xml/Makefile])
-AC_CONFIG_FILES([lib/fd/extensions/dict_rfc5777/Makefile])
-AC_CONFIG_FILES([lib/fd/extensions/dict_mip6i/Makefile])
-AC_CONFIG_FILES([lib/fd/extensions/dict_nasreq/Makefile])
-AC_CONFIG_FILES([lib/fd/extensions/dict_nas_mipv6/Makefile])
-AC_CONFIG_FILES([lib/fd/extensions/dict_dcca/Makefile])
-AC_CONFIG_FILES([lib/fd/extensions/dict_dcca_3gpp/Makefile])
-AC_CONFIG_FILES([lib/fd/extensions/dict_s6a/Makefile])
-AC_CONFIG_FILES([lib/fd/extensions/Makefile])
-AC_CONFIG_FILES([lib/fd/gx/Makefile])
-AC_CONFIG_FILES([lib/fd/s6a/Makefile])
-AC_CONFIG_FILES([lib/fd/Makefile])
-AC_CONFIG_FILES([lib/gtp/Makefile])
-AC_CONFIG_FILES([lib/ipfw/Makefile])
-AC_CONFIG_FILES([lib/Makefile])
-AC_CONFIG_FILES([src/mme/Makefile])
-AC_CONFIG_FILES([src/hss/Makefile])
-AC_CONFIG_FILES([src/sgw/Makefile])
-AC_CONFIG_FILES([src/pgw/Makefile])
-AC_CONFIG_FILES([src/pcrf/Makefile])
-AC_CONFIG_FILES([src/Makefile])
-AC_CONFIG_FILES([test/Makefile])
-AC_CONFIG_FILES([support/nextepc.conf])
-AC_CONFIG_FILES([support/freeDiameter/mme.conf])
-AC_CONFIG_FILES([support/freeDiameter/hss.conf])
-AC_CONFIG_FILES([support/freeDiameter/pgw.conf])
-AC_CONFIG_FILES([support/freeDiameter/pcrf.conf])
-#AC_CONFIG_FILES([support/freeDiameter/dict_legacy_xml.conf])
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
-
-echo "
-NextEPC configuration
---------------------
-version                 : ${PACKAGE_VERSION}
-host                    : ${host}
-source code location    : ${srcdir}
-compiler                : ${CC}
-compiler flags          : ${CFLAGS}
-linker flags            : ${LDFLAGS} ${LIBS}
-config file directory   : `eval echo \`echo ${sysconfdir}\``
-log file directory      : `eval echo \`echo ${prefix}/var/log\``
-"

debian/compat

@@ -0,0 +1 @@
+11

debian/control

@@ -0,0 +1,275 @@
+Source: open5gs
+Section: net
+Priority: optional
+Maintainer: Harald Welte <laforge@gnumonks.org>
+Uploaders: Sukchan Lee <acetcom@gmail.com>
+Build-Depends: debhelper (>= 11),
+               git,
+               pkg-config,
+               meson (>= 0.43.0),
+               flex,
+               bison,
+               libgnutls28-dev,
+               libgcrypt-dev,
+               libssl-dev,
+               libidn11-dev,
+               libmongoc-dev,
+               libbson-dev,
+               libsctp-dev,
+               libyaml-dev,
+               libmicrohttpd-dev,
+               libcurl4-gnutls-dev,
+               libnghttp2-dev,
+               libtins-dev,
+               libtalloc-dev,
+Standards-Version: 4.3.0
+Rules-Requires-Root: no
+Homepage: https://open5gs.org
+Vcs-Browser: https://github.com/open5gs/open5gs
+Vcs-Git: git://github.com/open5gs/open5gs
+
+Package: open5gs-common
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends}
+Description: 5G Core and EPC (Shared Files)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package contains some core libraries/plugins required by the other
+ binary packages such as open5gs-{mme,sgwc,sgwu,amf,smf,upf,...}.
+
+Package: open5gs-mme
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: MME (Mobility Management Entity)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the MME (Mobility Management Engine), which
+ terminates the S1 interfaces from the eNodeBs cells in the cellular
+ network, and interfaces via S11 to the SGW-C as well as via S6a to the
+ HSS.
+
+Package: open5gs-sgwc
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: SGW-C (Serving Gateway - Control Plane)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the SGW-C (Serving Gateway - Control Plane)
+ which is situated between the MME and PGW. It implements the S11 interface
+ to the MME, and the S5 interface to the SMF-C.
+
+Package: open5gs-smf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: SMF (Session Management Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the SMF (Session Management Function)
+
+Package: open5gs-amf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: AMF (Access and Mobility Management Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the AMF (Access and Mobility Management Function)
+
+Package: open5gs-sgwu
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: SGW-U (Serving Gateway - User Plane)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the SGW-U (Serving Gateway - User Plane)
+ which is situated between the eNB and UPF. It implements the S1U interface
+ to the eNB, and the S5U interface to the SMF-U.
+
+Package: open5gs-upf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         udev,
+         open5gs-common (= ${binary:Version})
+Description: UPF (User Plane Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the UPF (User Plane Function)
+
+Package: open5gs-hss
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         mongodb-org | mongodb,
+         open5gs-common (= ${binary:Version})
+Description: HSS (Home Subscriber Server)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the HSS (Home Subscriber Server) element of the
+ EPC, i.e. the central database of mobile network subscribers, with
+ their IMSI, MSISDN, cryptographic key materials, service subscription
+ information, etc.  It implements the S6a interface towards the MME
+ using the DIAMETER protocol.
+
+Package: open5gs-pcrf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         mongodb-org | mongodb,
+         open5gs-common (= ${binary:Version})
+Description: PCRF (Policy and Charging Rules Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package contains the PCRF (Policy and Charging Rules Function),
+ which controls the service quality (QoS) of individual connections and
+ how to account/charge related traffic.  It implements the Gx interface
+ towards the SMF-C using the DIAMETER protocol.
+
+Package: open5gs-nrf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: NRF (Network Repository Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the NRF (Network Repository Function)
+
+Package: open5gs-ausf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: AUSF (Authentication Server Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the AUSF (Authentication Server Function)
+
+Package: open5gs-udm
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: UDM (Unified Data Management)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the UDM (Unified Data Managemement)
+
+Package: open5gs-pcf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: PCF (Policy Control Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the PCF (Policy Control Function)
+
+Package: open5gs-nssf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: NSSF (Network Slice Selection Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the NSSF (Network Slice Selection Function)
+
+Package: open5gs-bsf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: BSF (Binding Support Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the BSF (Binding Support Function)
+
+Package: open5gs-udr
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: UDR (Unified Data Repository)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the UDR (Unified Data Repository)
+
+Package: open5gs
+Architecture: any
+Multi-Arch: same
+Depends: ${misc:Depends},
+         open5gs-common (= ${binary:Version}),
+         open5gs-mme (= ${binary:Version}),
+         open5gs-sgwc (= ${binary:Version}),
+         open5gs-smf (= ${binary:Version}),
+         open5gs-amf (= ${binary:Version}),
+         open5gs-sgwu (= ${binary:Version}),
+         open5gs-upf (= ${binary:Version}),
+         open5gs-hss (= ${binary:Version}),
+         open5gs-pcrf (= ${binary:Version}),
+         open5gs-nrf (= ${binary:Version}),
+         open5gs-ausf (= ${binary:Version}),
+         open5gs-udm (= ${binary:Version}),
+         open5gs-pcf (= ${binary:Version}),
+         open5gs-nssf (= ${binary:Version}),
+         open5gs-bsf (= ${binary:Version}),
+         open5gs-udr (= ${binary:Version})
+Description: 5G Core and EPC (metapackage)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This is a metapackage that depends on all the open5gs parts.
+
+Package: open5gs-dbg
+Architecture: any
+Multi-Arch: same
+Depends: ${misc:Depends},
+         open5gs (= ${binary:Version})
+Description: Debug symbols for Open5GS
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package contains debug symbols for Open5GS.

debian/copyright

@@ -0,0 +1,55 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: open5gs
+Source: https://github.com/open5gs/open5gs
+
+Files: *
+Copyright: 2017 Open5GS Group
+License: AGPL-3
+
+Files: lib/freeDiameter-1.2.1/*
+Copyright: 2008-2011, WIDE Project and NICT
+License: BSD-3-clause
+
+Files: debian/*
+Copyright: 2017  Harald Welte <laforge@gnumonks.org>
+License: GPL-3
+
+License: GPL-3
+ This package is free software: you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 3 of the License
+ .
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ .
+ On Debian systems, the complete text of the GNU General Public
+ License version 3 can be found in "/usr/share/common-licenses/GPL-3".
+
+License: BSD-3-clause
+ Software License Agreement (BSD License)
+ .
+ Copyright (c) 2008-2011, WIDE Project and NICT
+ All rights reserved.
+ .
+ Redistribution and use of this software in source and binary forms, with or without modification, are·
+ permitted provided that the following conditions are met:
+ .
+ * Redistributions of source code must retain the above·
+   copyright notice, this list of conditions and the·
+   following disclaimer.
+ ···
+ * Redistributions in binary form must reproduce the above·
+   copyright notice, this list of conditions and the·
+   following disclaimer in the documentation and/or other
+   materials provided with the distribution.
+ .
+ * Neither the name of the WIDE Project or NICT nor the·
+   names of its contributors may be used to endorse or·
+   promote products derived from this software without·
+   specific prior written permission of WIDE Project and·
+   NICT.

debian/open5gs-amf.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-amfd
+configs/open5gs/amf.yaml etc/open5gs
+configs/systemd/open5gs-amfd.service lib/systemd/system

debian/open5gs-ausf.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-ausfd
+configs/open5gs/ausf.yaml etc/open5gs
+configs/systemd/open5gs-ausfd.service lib/systemd/system

debian/open5gs-bsf.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-bsfd
+configs/open5gs/bsf.yaml etc/open5gs
+configs/systemd/open5gs-bsfd.service lib/systemd/system

debian/open5gs-common.dirs

@@ -0,0 +1 @@
+var/log/open5gs

debian/open5gs-common.install

@@ -0,0 +1,6 @@
+usr/lib/*/libogs*.so*
+usr/lib/*/libfd*.so*
+usr/lib/*/freeDiameter/*.fdx
+configs/freeDiameter/cacert.pem /etc/freeDiameter
+configs/logrotate/open5gs /etc/logrotate.d
+misc/db/open5gs-dbctl /usr/bin

debian/open5gs-common.postinst

@@ -0,0 +1,52 @@
+#!/bin/sh
+# postinst script for open5gs-common
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <postinst> `abort-remove'
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    configure)
+	# create a open5gs group and user
+	if ! getent passwd open5gs >/dev/null; then
+		adduser --system --disabled-password --disabled-login \
+			--home /var/run/open5gs --no-create-home \
+			--quiet --group open5gs
+	fi
+	for dir in /var/log/open5gs; do
+		if ! dpkg-statoverride --list "$dir" >/dev/null 2>&1; then
+			dpkg-statoverride --update --add open5gs open5gs 0755 "$dir"
+		fi
+	done
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+

debian/open5gs-common.postrm

@@ -0,0 +1,44 @@
+#!/bin/sh
+# postrm script for open5gs-common
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <overwriter>
+#          <overwriter-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    purge)
+        rm -f /var/log/open5gs/*.log || true
+        rmdir /var/log/open5gs || true
+        ;;
+
+    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+        ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+        ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+

debian/open5gs-hss.install

@@ -0,0 +1,4 @@
+usr/bin/open5gs-hssd
+configs/freeDiameter/hss.* etc/freeDiameter
+configs/open5gs/hss.yaml etc/open5gs
+configs/systemd/open5gs-hssd.service lib/systemd/system

debian/open5gs-mme.install

@@ -0,0 +1,4 @@
+usr/bin/open5gs-mmed
+configs/freeDiameter/mme.* etc/freeDiameter
+configs/open5gs/mme.yaml etc/open5gs
+configs/systemd/open5gs-mmed.service lib/systemd/system

debian/open5gs-nrf.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-nrfd
+configs/open5gs/nrf.yaml etc/open5gs
+configs/systemd/open5gs-nrfd.service lib/systemd/system

debian/open5gs-nssf.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-nssfd
+configs/open5gs/nssf.yaml etc/open5gs
+configs/systemd/open5gs-nssfd.service lib/systemd/system

debian/open5gs-pcf.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-pcfd
+configs/open5gs/pcf.yaml etc/open5gs
+configs/systemd/open5gs-pcfd.service lib/systemd/system

debian/open5gs-pcrf.install

@@ -0,0 +1,4 @@
+usr/bin/open5gs-pcrfd
+configs/freeDiameter/pcrf.* etc/freeDiameter
+configs/open5gs/pcrf.yaml etc/open5gs
+configs/systemd/open5gs-pcrfd.service lib/systemd/system

debian/open5gs-sgwc.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-sgwcd
+configs/open5gs/sgwc.yaml etc/open5gs
+configs/systemd/open5gs-sgwcd.service lib/systemd/system

debian/open5gs-sgwu.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-sgwud
+configs/open5gs/sgwu.yaml etc/open5gs
+configs/systemd/open5gs-sgwud.service lib/systemd/system

debian/open5gs-smf.install

@@ -0,0 +1,4 @@
+usr/bin/open5gs-smfd
+configs/freeDiameter/smf.* etc/freeDiameter
+configs/open5gs/smf.yaml etc/open5gs
+configs/systemd/open5gs-smfd.service lib/systemd/system

debian/open5gs-udm.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-udmd
+configs/open5gs/udm.yaml etc/open5gs
+configs/systemd/open5gs-udmd.service lib/systemd/system

debian/open5gs-udr.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-udrd
+configs/open5gs/udr.yaml etc/open5gs
+configs/systemd/open5gs-udrd.service lib/systemd/system

debian/open5gs-upf.install

@@ -0,0 +1,4 @@
+usr/bin/open5gs-upfd
+configs/open5gs/upf.yaml etc/open5gs
+configs/systemd/99-open5gs.net* etc/systemd/network
+configs/systemd/open5gs-upfd.service lib/systemd/system

debian/open5gs-upf.postinst

@@ -0,0 +1,53 @@
+#!/bin/sh
+# postinst script for open5gs-pgw
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <postinst> `abort-remove'
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    configure)
+	if test "x`sysctl -n net.ipv6.conf.all.disable_ipv6`" = x1; then
+		echo "net.ipv6.conf.all.disable_ipv6=0" > /etc/sysctl.d/30-open5gs.conf
+		sysctl -p /etc/sysctl.d/30-open5gs.conf
+	fi
+	if test "x`systemctl is-enabled systemd-networkd`" = xdisabled; then
+		systemctl enable systemd-networkd
+	fi
+	deb-systemd-invoke restart systemd-networkd
+	if test -f /etc/sysctl.d/30-open5gs.conf && grep "ogstun" /proc/net/dev > /dev/null; then
+		echo "net.ipv6.conf.ogstun.disable_ipv6=0" > /etc/sysctl.d/30-open5gs.conf
+		sysctl -p /etc/sysctl.d/30-open5gs.conf
+	fi
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+

debian/open5gs-upf.postrm

@@ -0,0 +1,46 @@
+#!/bin/sh
+# postrm script for open5gs-pgw
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <overwriter>
+#          <overwriter-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    purge)
+    if grep "ogstun" /proc/net/dev > /dev/null; then
+        ip tuntap del name ogstun mode tun
+    fi
+	rm -f /etc/sysctl.d/30-open5gs.conf
+    ;;
+
+    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+        ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+        ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+

debian/rules

@@ -0,0 +1,17 @@
+#!/usr/bin/make -f
+
+export DH_VERBOSE=1
+export DEB_BUILD_MAINT_OPTIONS = hardening=+all
+
+export LC_ALL = C.UTF-8
+
+include /usr/share/dpkg/default.mk
+
+%:
+	dh $@ --buildsystem=meson
+
+override_dh_install:
+	dh_install --sourcedir=obj-$(DEB_HOST_GNU_TYPE)
+
+override_dh_auto_test:
+	cd obj-$(DEB_HOST_GNU_TYPE) && meson test -v --suite unit

debian/source/format

@@ -0,0 +1 @@
+3.0 (native)

docker/README.md

@@ -0,0 +1,138 @@
+Docker running example
+===========================================
+* Build Image
+  
+  `$ docker-compose build`
+
+* Development 
+  
+  `$ docker-compose run dev`
+
+* Runtime
+  ```
+  $ docker-compose \
+    -f docker-compose.yml -f docker-compose.run.yml run run
+  ```
+
+* Test
+  ```
+  $ docker-compose \
+    -f docker-compose.yml -f docker-compose.test.yml run test
+  ```
+
+* Test(ubuntu:artful)
+  ```
+  $ TAG=eoan docker-compose build
+  $ TAG=eoan docker-compose \
+    -f docker-compose.yml -f docker-compose.test.yml run test
+  ```
+
+* Development(fedora:latest)
+  ```
+  $ DIST=fedora docker-compose build
+  $ DIST=fedora docker-compose run dev
+  ```
+
+* Runtime(debian:jessie)
+  ```
+  $ DIST=debian TAG=stretch docker-compose build
+  $ DIST=debian TAG=stretch docker-compose 
+    -f docker-compose.yml -f docker-compose.run.yml run run
+  ```
+
+* All Test with All Environment
+  
+  `$ ./check.sh`
+
+* Run WebUI 
+  
+  `$ docker-compose up -d`
+
+For OpenSUSE Build Service Release
+===========================================
+
+* Build Package
+  
+  ```
+  $ ./build-aux/git-version-gen . > .tarball-version
+  $ dpkg-source -b .
+  $ rm -f .tarball-version
+  ```
+
+* Get Release Key
+  
+  ```
+  $ wget http://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/xUbuntu_18.04/Release.key
+  $ sudo apt-key add Release.key
+  ```
+
+* Setup Repository
+  ```
+  $ sudo sh -c "echo 'deb https://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/xUbuntu_18.04/ ./' > /etc/apt/sources.list.d/open5gs-latest.list"
+  $ sudo apt-get update
+  ```
+  
+For Launchpad Release
+===========================================
+
+* Run Docker
+  
+  ```
+  $ docker-compose run dev
+  ```
+
+* Setup Debian Environment
+
+```
+export DEBFULLNAME='Sukchan Lee'
+export DEBEMAIL='acetcom@gmail.com'
+```
+
+* Transfer GPG key
+
+```
+  $ gpg --export-secret-keys --armor --output private.asc
+  $ gpg --import private.asc
+  $ gpg --export > public.asc
+  $ gpg --import public.asc
+  ```
+
+* Version Change
+  
+  ```
+  $ vi meson.build
+  $ ./misc/git-version-gen . > .tarball-version 2>/dev/null
+  ```
+
+* Upload OpenBuildService
+  
+  ```
+  $ dch -i
+  $ meson subprojects download freeDiameter
+  $ debuild -S -uc -us -d
+  $ osc co home:acetcom:open5gs latest
+  $ cd home\:acetcom\:open5gs/latest/
+  $ cp ~/git/open5gs_1.0.0.* .
+  $ osc ci -m "Update it"
+  ```
+
+* Upload LaunchPad
+  
+  ```
+  $ dch -i
+  $ meson subprojects download freeDiameter
+  $ debuild -S -d
+  $ dput ppa:open5gs/latest *.source.changes
+  ```
+
+* Tagging
+  
+  ```
+  $ git tag v1.x.x -a
+  ```
+
+* Build package
+  
+  ```
+  $ dpkg-buildpackage -d
+  ```

docker/alpine/latest/base/Dockerfile

@@ -0,0 +1,27 @@
+ARG dist=alpine
+ARG tag=latest
+FROM ${dist}:${tag}
+
+MAINTAINER Sukchan Lee <acetcom@gmail.com>
+
+RUN apk update && \
+    apk add --no-cache \
+        alpine-sdk \
+        bison \
+        flex \
+        git \
+        meson \
+        bash \
+        linux-headers \
+        bsd-compat-headers \
+        yaml-dev \
+        lksctp-tools-dev \
+        gnutls-dev \
+        libgcrypt-dev \
+        libidn-dev \
+        mongo-c-driver-dev \
+        libmicrohttpd-dev \
+        curl-dev \
+        nghttp2-dev \
+        talloc-dev \
+        iproute2

docker/alpine/latest/dev/Dockerfile

@@ -0,0 +1,20 @@
+ARG dist=alpine
+ARG tag=latest
+ARG username=acetcom
+FROM ${username}/${dist}-${tag}-open5gs-base
+
+MAINTAINER Sukchan Lee <acetcom@gmail.com>
+
+COPY setup.sh /root
+
+RUN apk update && \
+    apk add --no-cache \
+        vim \
+        sudo
+
+ARG username=acetcom
+RUN adduser -u 1000 acetcom -D && \
+    echo "${username} ALL=(root) NOPASSWD:ALL" > /etc/sudoers.d/${username} && \
+    chmod 0440 /etc/sudoers.d/${username}
+
+WORKDIR /home/${username}

docker/alpine/latest/dev/setup.sh

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+if ! grep "ogstun" /proc/net/dev > /dev/null; then
+    ip tuntap add name ogstun mode tun
+fi
+ip addr del 10.45.0.1/16 dev ogstun 2> /dev/null
+ip addr add 10.45.0.1/16 dev ogstun
+ip addr del 2001:230:cafe::1/48 dev ogstun 2> /dev/null
+ip addr add 2001:230:cafe::1/48 dev ogstun
+ip link set ogstun up