On a lapses of time monotonicity (and possibly other errors),
stop and restart the receive streaming with a buffer flush
in between. This is a cleaner replacement to the previous
clock reset with that didn't attempt to stop steaming.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2647 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Type size_t was used in the UHD time_spec_t to integer
conversion, which would overflow at roughly 4 and a half
hours causing the sample buffer to error on timestamp
validity. Builds where size_t takes on 64-bits were not
affected by this bug.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2646 19bc5d8c-e614-43d4-8b26-e1612bc8e597
With UHD b4fc0d61bb6cbd1a5614745bab9aeb0abc22cb6f
Sample clock will reset to zero after an overrun. Earlier
versions may hang the FPGA, which is non-recoverable,
requiring a manual image reload or reboot.
If reset to zero, attempt to kick the sample clock to the
last properly received timestamp value. At this point,
there will be a timing continuity jump, which will drop
connections, but transmit and receive chains should be
aligned allowing for re-establishment.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2645 19bc5d8c-e614-43d4-8b26-e1612bc8e597
The value is used to align transmit and receive time slots within
a sample. This oscilloscope measured value is close, but may
need minor tweaking.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2638 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Occasionally, the E100 will have errant timestamps at start
related to previous sessions. Early packets will be thrown
out anyways, so do this explicitly so the timestamps don't
royally fuck up the sample timing.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2635 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Remove all RFX specific parts and control daughterboard
functionality using the base API. The tuning is now set
to a non-inverted image so remove the I/Q swap as well.
Daughterboard configuration is set through an enum
variable. Currently, there is no auto-configuration and
the default is Tx/RX on sides A/B respectively. For
transceiver boards the receive antenna is set to RX2.
enum dboardConfigType {
TXA_RXB,
TXB_RXA,
TXA_RXA,
TXB_RXB
};
const dboardConfigType dboardConfig = TXA_RXB;
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2632 19bc5d8c-e614-43d4-8b26-e1612bc8e597
