Remove public API that makes no sense anymore and is dead code.
I see the dropped API as a dead-end initial misconception of the early mgcp
client, and it doesn't really make sense to drag this stuff along. It has not
been used by osmo-msc,-bsc for a long time now, and just confuses the reader.
It is public API, yes, and older versions of osmo-msc / osmo-bsc will not be
able to compile against this, but even if it did, the resulting MGCP client
would not work with the current osmo-mgw: this API is still based on the
premise that the MGCP client dictates the MGW endpoint numbers, a concept that
cannot be used with the current osmo-mgw. Instead, osmo-mgw expects a
wildcarded endpoint upon CRCX and assigns its own endpoint names.
Also, the bts-base configuration is unused and a legacy of when osmo-bsc_mgcp
had explicit BTS and CN sides.
Change-Id: I98a9f1f17a1c4ab20cea3b08c7d21663592134d6
If the vty client enters multiple local / remote addresses, that leaks talloc
memory of the previously set addresses. Free those first, if any, using
osmo_talloc_replace_string().
Change-Id: I331b3d53b5eb330b87d798f952077a043674d409
Add the expected domain name, and move the error log to where the expected
domain name is compared.
Change-Id: I59f40dc9263f686852f103ca904fc0a6702d7c8e
Half of those are obviously zero, but I'd rather print the raw data instead of
adding string constants, even if the condition must always lead to 0.0.0.0:0.
Rationale: I had osmo-mgw listen on 0.0.0.0 and got the error message
DRTP ERROR endpoint:0x1 destination IP-address is invalid
which didn't convey that 0.0.0.0 is regarded as invalid.
Change-Id: I9e98d464a27038904797c5c10735a98ef5b7b9c3
mgcp_do_write() is the final stage of writing data towards the MGCP server
(MGW). In that function, drop an unconditional iteration and copy of the MGCP
message to a static string buffer for no apparent reason besides debug logging.
Instead, use osmo_escape_str() with a limited length, which can just be an
inline format argument in the LOGP() statement. This way, the string mangling
is simpler and only gets run when DMGCP is actually on debug log level.
Change-Id: Id6877ed7fd7dbe009b2ece8792d5160d040c1aaa
Add new environment variables WITH_MANUALS and PUBLISH to control if
the manuals should be built and uploaded. Describe all environment vars
on top of the file.
When WITH_MANUALS is set, install osmo-gsm-manuals like any other
dependency and add --enable-manuals to the configure flags (for "make"
and "make distcheck"). Add the bin subdir of the installed files to
PATH, so osmo-gsm-manuals-check-depends can be used by ./configure.
Related: OS#3385
Change-Id: I24179b21ce4ff182649243e286c87c824b889454
Set AM_DISTCHECK_CONFIGURE_FLAGS in Makefile.am instead of
DISTCHECK_CONFIGURE_FLAGS. This is the recommended way from the
automake manual, as otherwise the flag can't be changed by the user
anymore.
Related: OS#3718
Change-Id: Ie9db1519e89d2a8ca1e403e480f57d72fc25ab75
Jenkins currently runs the build twice, once with
MGCP="--enable-mgcp-transcoding" and once with
MGCP="--disable-mgcp-transcoding". The configure.ac does not have this
parameter, so let's remove the confusing variable.
This is in preparation for describing all environment variables used in
jenkins.sh (follow up commit).
Change-Id: I6223afef0f34d90170a691d7d5b1d9542c34c6b0
Moved to doc/manuals/, with full commit history, in preceding merge commit.
Now incorporate in the build system.
Build with:
$ autoreconf -fi
$ ./configure --enable-manuals
$ make
Shared files from osmo-gsm-manuals.git are found automatically if
- the repository is checked out in ../osmo-gsm-manuals; or
- if it osmo-gsm-manuals was installed with "make install"; or
- OSMO_GSM_MANUALS_DIR is set.
Related: OS#3385
Change-Id: I504f05a49721f2dfe105b6c5fd1995c4e7a0be9c
See also Ia6fe5ead4b601931c1bf41b29fc1b237aac37d2c in osmo-mgw.git, which
changes the initial single-character implementation to match this specification
of string tokens separated by spaces.
Change-Id: If15a88c3b5b40fd1d24ad0f94f3231f678669ab1
This is the first update since the libosmocore changes to the 'show
online-help' generated output. Hence the produced document now benefits from
the structural improvements:
- not repeating common commands for every node;
- using section names that match the VTY prompt.
Change-Id: I79804ec0e61cc19a679f079a083a5ea2ea3ee2de
Add a counter group for DLCX commands. The group contains counters for
successful connection processing as well as various error conditions.
This provides a quick overview of DLCX failures on each trunk throughout
the lifetime of the osmo-mgw process.
The counters are displayed by 'show mgcp stats' and 'show rate-counters'
While here, rename MGCP_MDCX_FAIL_DEFERRED_BY_POLICY to
MGCP_MDCX_DEFERRED_BY_POLICY; we have decided that deferred connections
aren't failures, and this keeps names used by DLCX and MDCX in sync.
Also remove some allocation failure checks with OSMO_ASSERT(); such
checks aren't en vogue anymore.
Change-Id: Ie0dde2faf02fd68a69f986973d39b1bea367039b
Depends: I80d36181600901ae2e0f321dc02b5d54ddc94139I
Related: OS#2660
Even though osmo-mgw advertises the -s option, the getopt configuration lacks
-s and that option does not work. Thus the osmo-mgw.service file that uses -s
was unable to start.
Add 's' to the getopt configuration, fix -s and hence also fix the .service
file.
Change-Id: I6f298aef73eb3486d04706910e9fdbaaebaf2481
The function that parses the LCO uses an internal buffer to store the
codec name that has been issued via LCO. This buffer is only 9 byte
long, this means an 8 character string can be stored. If a codec name
exceeds this limit it gets chopped. For example "GSM-HR-08" becomes
"GSM-HR-0", which may mess up the codec negotiation.
- Increase the buffer from 9 to 17 byte.
Change-Id: I17ce7acde1f23ab1394227d74214fe2a55cd2264
Related: OS#3673
Add a counter group for aggregated RTP connection statistics.
This group contains RTP counters which aggregate values of the
ephemeral RTP counters maintained per connection (mgcp_conn).
This provides a global overview of RTP processing for each
trunk throughout the lifetime of the osmo-mgw process.
The counters are displayed by 'show mgcp stats' and 'show rate-counters'.
While here, fix a typo in an item of the mgcp_conn_rate_ctr_desc array:
"rtp:octets_rx" was displayed for outbound packes; now says "_tx".
Change-Id: I80d36181600901ae2e0f321dc02b5d54ddc94139
Related: OS#2660
Add a counter group for MDCX commands. The group contains counters for
successful connection processing as well as various error conditions.
This provides a quick overview of MDCX failures on each trunk throughout
the lifetime of the osmo-mgw process.
The counters are displayed by 'show mgcp stats' and 'show rate-counters'.
Change-Id: I79c27425ba40c3a85edc6cd846cba325d847298c
Depends: Ia2004f8063f3a50b5d7a838ebe8a784a47fcc50d
Related: OS#2660
Add counters for error conditions which I overlooked in
commit 1e174875bf
Change-Id: Ia2004f8063f3a50b5d7a838ebe8a784a47fcc50d
Depends: If4f097c5e441914eaa24c7657813ebb3f9a49916
Related: OS#2660
Use a local variable to shorten the length of rate counter names.
Cosmetic only; no functional change.
Change-Id: If4f097c5e441914eaa24c7657813ebb3f9a49916
Related: OS#2660
Make the 'mgcp show stats' VTY command display TX/RX counters
for an RTP stream. This command was already showing the counter
for dropped packets from the same counter group, so it seems
natural to display other relevant counters in the group as well.
Change-Id: I1313e64d7d8b49964f21fc8d213cba6c9fb6c7cf
Related: OS#2660
Add a counter group for CRCX commands. The group contains counters for
successful connection processing as well as various error conditions.
This provides a quick overview of CRCX failures on each trunk throughout
the lifetime of the osmo-mgw process.
For example, after running the TTCN3 mgw test suite, the counters show
the following values:
OsmoMGW> show rate-counters
crxc statistics:
crcx:success: 88 (0/s 88/m 0/h 0/d) CRCX command processed successfully.
crcx:bad_action: 0 (0/s 0/m 0/h 0/d) bad action in CRCX command.
crcx:unhandled_param: 1 (0/s 1/m 0/h 0/d) unhandled parameter in CRCX command.
crcx:missing_callid: 1 (0/s 1/m 0/h 0/d) missing CallId in CRCX command.
crcx:invalid_mode: 1 (0/s 1/m 0/h 0/d) connection invalid mode in CRCX command.
crcx:limit_exceeded: 0 (0/s 0/m 0/h 0/d) limit of concurrent connections was reached.
crcx:unkown_callid: 0 (0/s 0/m 0/h 0/d) unknown CallId in CRCX command.
crcx:alloc_conn_fail: 0 (0/s 0/m 0/h 0/d) connection allocation failure.
crcx:no_remote_conn_desc: 1 (0/s 1/m 0/h 0/d) no opposite end specified for connection.
crcx:start_rtp_failure: 0 (0/s 0/m 0/h 0/d) failure to start RTP processing.
crcx:conn_rejected: 0 (0/s 0/m 0/h 0/d) connection rejected by policy.
OsmoMGW>
These same counters are now also shown by 'show mgcp stats'
in the context of the trunk which they belong to.
With input from Philipp Maier.
Change-Id: Ida82fc340d5c66180e5fe9a0d195e9be6dc64c61
Related: OS#2660
in_addr consists only of s_addr, which is an integer type that
can be compared directly. By avoiding memcmp() here we would have
been able to catch Coverity CID#188874 even without Coverity, and
make the code more compact...
Change-Id: Ic6105d39ae2fb4b301f87448b16763fe9f695621
We were comparing 16 bytes (sockaddr_in) in memcmp() rather than using
four bytes (struct in_addr in mgcp conn end).
This is a good example why we should actually simply use the == (equals)
operator rather than using memcmp which treats everything as void.
Change-Id: Ic64256619ef893d625400e8b1b573ea2c629ed9c
Fixes: Coverity CID#188874
* Refactor code to have unified checks on all paths activating Osmux.
* Improve checkings at activation time and add logging.
* Code now enforces endp osmux status to be enabled before processing
the frame through endp->osmux.out. Before, a delayed or bad pkt could
arrive and be processed by an endp with osmux not enabled, using
endp->osmux.out that was not initialized and ended up crashing:
libosmo-netif/src/osmux.c:281:3: runtime error: member access within null pointer of type 'struct msgb'
This could also happen if a BSC started sending or we received (non legacy dummy) osmux
frames before we received the BSC CRCX ACK agreeing on osmux negotiation
and switching to ACTIVATING state.
Related: SYS#4350
Port from openbsc 4a2cc9eb0a0f9424c16b26fcb757483a39d67482.
Includes fixup from openbsc I438349bffaa46a10ad8983090a4b17aed7e00d82.
Change-Id: Iac11e447ec0d76e4e74ec982a6e3f63b35548978
State ACTIVATING is set once negotiation between the 2 parts went
successfuly.
Port from openbsc 96bd7b075a59eb051079152241b127ca944b0781.
Change-Id: Ic56eda1251be41369d869e687a1cf955df2c6d61
Prior to this commit, the check was only done on legacy dummy frames.
Port from openbsc a42d4584fd01c9cd1021fab609bdaaafe859c13a.
Change-Id: I5b6606d72a9f5ae593a8e3ab5fbbe7e1e5a0ae11
Otherwise we end up in a weird state where we have timers set up but
osmux is still flagged as not enabled.
Cherry-picked from openbsc cad739d2386640a68c24e3d470ddacdcaf377561.
Change-Id: I0a334842463d311bc80a980e60fb702a0a9ad610
Since that define is already used to allocate size of osmux_cid_bitmap,
let's use it here too instead of hardcoding its value.
Change-Id: Ib2e4febee8bc6bcc035ad0a65c5c1eb94ef5e6fb
Right now it's not a big issue since OSMUX_CID_MAX is 255, so 255+1 is
256 which fits array boundaries correctly (multiple of 8). However, if
for example OSMUX_CID_MAX was modified to be 12, 12+1/8 = 1, so we'd
have an undesired memory access when accessing last 4 CIDs.
A +1 should be kept on top, because OSMUX_CID_MAX specified the maximum
number used by a CID, that is (0,OSMUX_CID_MAX), and as a result we
require OSMUX_CID_MAX+1 slots.
Change-Id: Iaf9b93712dbd2a862b01e70dd8e11893bfa6b24c
osmo-bsc-mgcp was removed recently from osmo-mgw.git as it belongs to
openbsc.git.
This symlink was a leftover from that time.
Change-Id: Ifdcb266efd821eac9d90aff186400f85751e8f42
When the peer address is still 0.0.0.0, the endpoint is not yet configured.
This commonly happens before bridging a call is complete, so instead of ERROR
logging about an invalid packet, rather INFO-log this as "early media".
Related: OS#3539
Change-Id: I335f6453bd599be76eef08fcf9e5daed071e5b6d
The Connection Identifier is defined as a hex string, so clients may send the
ID back with or without leading zeros. Ignore all leading zeros when comparing.
A specific SCCPlite MSC is observed to DLCX with Connection Identifier with
leading zeros removed, which would mismatch pefore this patch.
Extend test_conn_id_matching() in mgcp_test.c to include leading zero tests.
Now, mgcp_conn_get() would match a valid id with *any* amount of leading zeros,
even if that far surpasses the permitted conn id length. Valid lengths of
incoming conn ids should be and is checked elsewhere.
Related: OS#3509
Change-Id: If55a64a2da47b6eff035711c08e4114d70dbec91
The Connection Identifier is defined as a hex string, so clients may send the
ID back in lower case. Convert to upper case before comparing.
A specific SCCPlite MSC is observed to DLCX with Connection Identifier in lower
case, which would mismatch pefore this patch.
Add test_conn_id_matching() in mgcp_test.c to verify case insensitivity.
Cosmetic: use strcmp(), not strncmp(). In the presence of a terminating nul as
we can assume here, this makes no functional difference, but it clarifies the
code.
Related: OS#3508
Depends: Ib0ee1206b9f31d7ba25c31f8008119ac55440797 (libosmocore)
Change-Id: I8e52278c3abe9e9c8c848c2b1538bce443f68a43
