The commands net.<netid>.bsc.<bscid>.* are now forwarded to the
appropriate osmo-bsc. <netid> for now is just 0. <bscid> is not the LAC
anymore (since that could be ambiguous), but instead the number as
configured in bsc-nat.cfg
The first fields are still the location up to the height.
The next field is "operational" if any of the trx are operational,
otherwise "inoperational"
The second to last field contains "locked" if all of the trx are in the
admin state, otherwise "unlocked".
The last field represents the rf policy currently in effect. It is one
of (on|off|grace|unknown).
<tstamp>,<valid>,<lat>,<lon>,<height>,<oper>,<admin>,<policy>
The ip.access nanoBTS has issues if the admin changes are called
too often in too little time. This will lead to a situation where
the site manager will fail to start properly. Remove the TRX code
as the RF Control class does not support setting this per TRX.
nat: Catch up with controlif_setup API change
We now save a control handle reference in the nat
osmo-bsc: Catch up with controlif_setup API change
We now save a control handle reference in the gsm network
bts_hsl_femtocell.c: In function ‘hsl_sign_link_up’:
bts_hsl_femtocell.c:206:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘uint64_t’ [-Wformat]
bts_hsl_femtocell.c:210:2: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘uint64_t’ [-Wformat]
When adding the "omit RTCP" the method started to return with
a proper return statement.
mgcp_network.c: In function ‘send_to’:
mgcp_network.c:233:1: warning: control reaches end of non-void function [-Wreturn-type]
abis_nm.c: In function ‘abis_nm_get_attr’:
abis_nm.c:1380:11: warning: unused variable ‘cur’ [-Wunused-variable]
abis_nm.c: In function ‘ipac_parse_bcch_info’:
abis_nm.c:2588:11: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
bts_nokia_site.c:1310:6: warning: variable ‘constructed’ set but not used [-Wunused-but-set-variable]
bts_nokia_site.c: At top level:
bts_nokia_site.c:1364:12: warning: ‘dump_elements’ defined but not used [-Wunused-function]
gsm_04_08.c: In function ‘mm_rx_loc_upd_req’:
gsm_04_08.c:521:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
osmo_msc.c: In function ‘msc_ciph_m_compl’:
osmo_msc.c:122:7: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
bts_hsl_femtocell.c: In function ‘hslfemto_bootstrap_om’:
bts_hsl_femtocell.c:101:11: warning: variable ‘cur’ set but not used [-Wunused-but-set-variable]
bts_hsl_femtocell.c: In function ‘hsl_drop_oml’:
bts_hsl_femtocell.c:232:21: warning: variable ‘line’ set but not used [-Wunused-but-set-variable]
handover_logic.c: In function ‘ho_chan_activ_ack’:
handover_logic.c:197:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
gcc does not really know the _NR_OF_ELEMENTS_IN_ENUM approach, add
the _NUM_GSM_BTS_TYPE to the handled cases.
gsm_data.c: In function ‘gsm_set_bts_type’:
gsm_data.c:349:2: warning: enumeration value ‘_NUM_GSM_BTS_TYPE’ not handled in switch [-Wswitch]
We now have a lchan->csd_mode member that determines if RSL should
activate the channel in CSD transparent services or not. The previous
code always assumed CSD is non-transparent.
(This requires libosmocore >= eed26116c96f03c6128fac3dead9054714af6cab)
Some nodes below 'config' didn't have ournode_exit / ournode_end,
and thus were not able to properly perform this function. exit should
always only go back one level, while end drops us back to ENABLE_NODE.
The prompt now represents the nesting level, and there's one consistent
space after the final prompt character (typically #).
This effectively limits the number of BTSs to 256, but I think that's
acceptable for now. Unfortuantely there's no decent way to dynamically
update the valid number range depending on how many BTSs are actually
configured in the system :/
