OpenBSC required additional care because of an unusal .git location.
This is not need anymore for osmo-mgw
Change-Id: I5aad67612026947ad52cdc9477b603732c146e7a
Add vty and logging previously used from libcommon
Rename libmgcp to libosmo-legacy-mgcp and install.
Use DLMGCP, not DMGCP.
Change-Id: I71a0a16ebaaef881c34235849601fc40aa12cfd7
Depends: libosmocore I09c587e2d59472cbde852d467d457254746d9e67
Remove libiu here, use the functions from libosmo-ranap instead, by applying
the ranap_ / RANAP_ prefix.
Corresponding change-id in osmo-iuh.git is I6a3f7ad15be03fb94689b4af6ccfa828c25f45c0
Change-Id: Ib8c4fcdb4766c5e575618b95ce16dce51063206b
In SGSN, actually place the port in the SGSN config by default, so that the
gsup port may now be omitted in the VTY config (the IP address suffices).
Adjust the osmo-sgsn.cfg example.
Depends: I4222e21686c823985be8ff1f16b1182be8ad6175 (libosmocore)
Change-Id: I50f2040e2eb0baacb43849e93cfed10cbc2fc156
In case of an IMSI Detach, we don't have a conn_fsm, yet we still need to send
release messages. Hence directly release the conn in msc_subscr_conn_close()
when there is no conn_fsm present.
Move the conn release actions from the conn_fsm cleanup function to new
function msc_subscr_conn_release_all(). From the FSM cleanup, call
msc_subscr_conn_close(), and invoke msc_subscr_conn_release_all() from there.
Document msc_subscr_conn_close() behavior.
Change-Id: Ied6981099605ad803f8ffed38f23ed8203a97727
The clear command is currently triggered from the wrong place.
This is a fixup that corrects that. However, it will introduce
another problem: The clear command is not sent on detach.
Adjust test expectations.
Change-Id: Ia27d7e94cb11adf351457b3b0e98a5c9d5070fbf
The sccp/ss7 configuration is now fixed. The cs7 instance id is
implicitly detected from the bsc_addr or the msc_addr. Depending
on what is listed last. (I am not sure if that is wise, maybe
we should only use the local/bsc address to do the lookup).
Remove cs7-instance vty command
Modify VTY commands, so that the fixed API is used
Set msc->a.cs7_instance from the VTY to when msc/bsc addr is parsed
Fix the initalization to use osmo_sccp_simple_client_on_ss7_id() and
pass the cs7-instance id we determined from the vty.
The whole thing is not waterproof yet. We are still not at the
point where we allow to leave the local address out. This would
be fine, but when it is left out, the only way to determine the
cs7 instance is to use the msc_addr then.
We also might want to make sure to reach a state where all cs7
related config may be left out (like with the MSC)
The clear command is sent via the A-Interface for both,
A and IuCS connections. This is wrong.
Only send the clear command for connections related to
the A-Interface, which means only for connections where
the RAN is set to GERAN
The external mncc currently does not work properly since the
MNCC_RTP_CREATE commands are removed due to the MSC-Split. It
is possible to operate without these commands, but then it is
not possible to route the RTP streams to an outside leg. Only
internal bridging is currenlty possible. This method is used
when the internal MNCC is enabled.
Add the missing MNCC_RTP_CREATE implementation.
Add logic to keep the old bridging mode working.
The generated mgcp messages are not displayed properly (stray
newlines). Also, the messages we receive are not displayed
at all.
Display generated and received messages in logtext, reformat
the strings properly so that the logtext does not get messed
up
When a subscriber connection is freed on the MSC side (the
conversion is over) the MSC should send a clear command to
the BSC in order to inform the BSC that the connection is
over. Currently this step is missing. Instead we wait for
the BSC to issue a clear request. This is not as it should
be, connections should be actively cleared by the MSC.
Add the missing clear command
The allocation and usage of the iu struct was accidentally
re-introduced into a_iface_bssap.c.
Remove the allocation and the usage of iu struct.
Related to:
aoip: don't use iu struct: do not allocate unnecessary ue_conn_ctx
Using the MSC numbers in the logtext is not very expressive,
ise the SCCP-Addresses instead.
When creating the sccp instance and user, use more parseable
string than "MSC No.: n"
Change-Id: Ib56134193ba95538f63e09dc702dc3ff0e827a02
The warning message that is displayed when a non standard SSN is
set is confusing.
Make warning message more expressive.
Change-Id: I5283bcc5acf4739d468fe43937f0e59f44dee3d9
The vty commands:
called-addr my_msc
calling-addr my_bsc
are not very expressive to the user. Change the command
names into something more expressive:
msc-addr my_msc
bsc-addr my_bsc
Also change the function and variable names accordingly
Change-Id: I8d46aad01fb80afcaccb966fadd6b2ecbd1a1f9e
"calling_address" and "called_address" is not very expressive.
change the respective struct memeber names of bsc_msc_data to
bsc_addr and msc_addr to increase readability of the code.
Change-Id: I63b2e810b97131c690edd5a9cc5c7b3b54ec5e12
do not start unless the user has configured sufficient SCCP
addresses via VTY. Do not accept address that lack point codes
or ssn
Change-Id: I42b4fb0ef93dec225e220e88e1b92664b9b55be3
The VTY technically allows setting custom values for the
SSN. However, SSN values and their purposes are well
standardized.
If the user has configured an SSN, check that is compliant
to the standard. If not, warn and ignore the setting by
using the stanard SSN.
If the user left out the SSN, automatically use the standard
SSN.
Change-Id: Ib34fe0474f625b964dbfedfb4263fb0b5f976bdc
The BSC clears all connections on reception of a
BSSAP RESET, however, the RESET command must not
affect the connections of other MSCs.
Ensure that only the connections of the MSC who
actually sent the BSSAP RESET are cleared.
Change-Id: I68fe2eadeae8ba6b6728fced42f6308e9b2d997a
The current VTY implementation has no knowledge about the
libosmo-sccp nodes and therefor can not resolve parent nodes,
nor decide if we deal with a config node.
Change-Id: I815a57ed6270bd55c25ee9a8f45026d4aaad9004
finish the implementation for msc sided reset, automatically
register connecting BSCs.
Ensure that all sccp connections are cleared when the reset
procedure executes.
Change-Id: Iba3f5523795c6972600bbfda2a02b06ba84ea12d
The call id field in the DLCX message is missing. Use the endpoint
id as call id in all CRCX and DLCX messages.
Change-Id: I8b78b76126c63c4882e982c64c3953dbe1dab179
When the reset is started, state machines are allocated. The user
must provide a correctly filled structure where the reset start
function adds the state machine into.
This is prone to errors, besides of that, a proper deallocator
function which tears down the osmo fsm is missing.
make a more cofmortable allocator function and add deallocator
function.
Change-Id: I0054fb31589fb9f4c63c45df436e83448c59bd97
Move osmo_sccp_simple_client() setup out of iu_init() and a_init().
In msc_main.c and sgsn_main.c, initialize the STP connection first and then
pass to iu_init() and a_init().
This allows serving 3G (IuCS) and 2G (A) from one and the same MSC instance.
Since both OsmoHNBGW and OsmoBSC are using PC 23 by default now, move BSC to PC
42 (because OsmoBSC typically has vty port 4242, bla).
Also:
a_iface.c: remove now unused defines
a_init(): remove osmo_ss7_init() call that duplicated msc_main.c
Change-Id: I963a94e1a0bfc455992d22940dcc9c67c44570b9
Currently we do not check for errors during the generation of
channel type and speech codec list. This might blow an assertion
in gsm0808_create_ass if the generated data is invalid. So
we need to check beforehand.
Change-Id: Ifa7ba00e0d731a3c43a8dbfac893c71d63559eb5
The log output from the rsl layer injects line breaks at wrong
places in the log. This messes up the logtext. This commit fixes
the problem.
Change-Id: Ibebffd52a551ead0f5486a56a92774204b337c7d
When the mgcp_client prints MGCP strings in the log text, it does
not remove the line break before printing. This will mess up
the log text. This patch removes the line break characters before
printing properly.
Change-Id: I7fce23a50371ce94a8f2d8aef2fe9d2001d41b8c
The bsc side currently can not receive reset commands from an
MSC. This patch adds required functionality to receive a reset
command and acknowlege it properly. The effects are the same
as with when sending resets (all drop all ongoing calls and
sccp connections)
Change-Id: I44c7e54c845948c54614b36d97d2ba1e760ac46b
The AoIP standard also describes an MSC->BSC reset procedure. We
currently do not implement it. However, the fsm that is used to
issue the reset request from the bsc side is not generalized. This
patch generalizes the code in order to be able to use the same
code on the MSC side to perform a reset procedure from there.
Change-Id: I65e20bebb126ba35122ca3a545393d18fcadf5ad
Forgot to remove the counter struct osmo_timer_list msc_reset_timer;
Needs to be fixuped into the reset handling patches
Change-Id: I6d397188732f4593edc12459de6f3b5f47b7f06a
in osmo_bsc_sccp.c all code is commented out. There is no point
in keeping the file. This commit deletes it.
Change-Id: I5c9f15a658c41fd872db7b078d38fbfdeb2bdcbd
the old sccp-lite based imlementation offered support for sending
an USSD notification as soon as a loss of the MSC connection is
detected. This is done before forcefully dropping the affected
connection.
This commit ports the feature to the new libosmo-sigtran
implementation.
NOTE: I do not know if this works and I also do not really
understand how this is even possible. Sending an USSD notification
would rquire the subscriber to be properly attached? When the MSC
is lost this almost not possible since no backend to authenticate
against is available.
Change-Id: Idaadf8d708608843e3c36ed35b3661b48096c21b
The function names in a_iface_bssap.c are not very expressive.
The problem not only exists on the API side, but also for static
functions. This patch replaces the function names with more
expressive names.
Change-Id: I1cdf37e4034ed8a9536c253c13910fc436c66f04
The function names if the API function in a_iface.c are not
very expressive. Besides of that, the prototypes are in the
wrong header file. This commit gives the function more
expressive names and moves the prototypes in the right header
file.
Change-Id: I6af4b7deed9d11ac5fe188eb5625fba50caad7c1
Currently the rtp base port of the BTS is hardcoded (4000) and not
configurable. This patch adds VTY configuration options to make
it adjustable.
Change-Id: I76e008eb0bd95b2941b67ea2fbdc1a82eef3cc5f
Clearing all endpoints by sending a DLCX on startup has ben found
to be a bit too offensive. It also will not help against
inconsitancies that may occour during runtime (e.g. an overheard
DLCX during regular call teardown).
This reverts commit b669ea94cb78fd9b56ee8dd9392538151349f8ba.
Change-Id: Ia3bd8bfe9a09e300cf11629f7d7e3012ca8f394d
The MSC is aware of the assigned endpoints at all times, so it
will not assign an occupied endpoint to someone else. However,
if it has just restarted, there maybe lingering open endpoints.
This patch introduces a fairly simple soultion. Before a new
endpoint is seized (CRCX), a DLCX is send in advance. If the
endpoint was still occupied with a dead connection, it will
be freed. If it was free anyway, the DLCX will just have no
effect.
Change-Id: I7990e9e7c4c8101b8772ab5505a7cc11f8f7cd23
When the BSC is vanishing, the subscriber connections will stay
active until the MSC is instructed via tha A interface to clear
the connections. Unfortunately, this will most likely not be
the case because the BSC will most likeley have lost all its
state and does not know about the old connections anymore.
This patch fixes the problem by looping through the list with
the active gsm subscriber connections and clearing them manually
when the reset from the BSC is received. Only connections by the
bsc who actually executes the reset are affected. Connections
from other BSCs will not be touched.
Change-Id: Ic2b43b937d08a6dea4fe70dbc3eb722323338dc1
If the MSC is crashing and restarting, it may leave some endpoints
open. The endpoints can not be re-used until they are deleted
(DLCX). This patch sends a DLCX to all possible endpoints (usually
this is in a countable range) in order to clear possible open
endpoints from a previous run
Change-Id: I9de2f67ffe08b2d76574ef4470c7a9767ca74702
struct mgcpgw_client and struct mgcp_inuse_endpoint are not
accessible from outside, making it difficult to look in the
mgcp client properties and status. The commit moves the
structs into the header file.
Change-Id: I20dcdaac013e3bcbd870eaf34a17598eac373f95
When an MGCP endpoint is deleted, we need to mark its endpoint
id as unused, so other calls can used it. This is currently not
happening. This patch fixes that.
Change-Id: I346affea940efb3a55e9b34c28a6cbe676d57d56
Currently the assignment of endpoint identifiers works by just
incrementing a counter. The mgcpgw only has a limited amount
of endpoint identifiers avaliable, this means we will run out
of endpoints after only a few calls.
This commit adds a mechanism to keep track of used endpoint
identifiers so unused endpoint identifiers can be re-used
Change-Id: I081f9178975b6593a7ab8de5261a29a1d43d36a3
Currently no DLCX command is sent to the mgcpgw when a call is over,
this leaves the endpoint open. This means that the endpoint can not
never be reused by other calls. This patch adds a DLCX that
terminates the the endpoint when the call is done.
Change-Id: Ifc5a7a62fc07b4b7fee612d52e949fcd6a8e04ed
The mgcpgw client currently lacks support for DLCX. This patch
adds a generator function to generate a DLCX command as well.
Change-Id: I1ac4635fc1371f2d3a46815f26a1f9ede3eedafa
Improve the way the BSC executes its RESET/RESET-ACK sequence.
Currently only a simple bool variable serves as a state holder.
We set this variable to true when we receive the RESET-ACK
message. Unfortunately no further checking is done. This
patch replaces the old mechanism with a more elaborated
implementation which also detects a loss of the connection
and makes sure to reconnect properly afterwards. Also the
all open connections are closed on connection loss
Change-Id: I876319b15103cc395e74597a52ce4d1a934915f4
This patch adjusts the code to use osmo-stp. This is only an
intermediate solution, since we still have hardcoded parameter.
Next step is to use the VTY options from libosmo-sigtran to
issue the configurations.
Change-Id: I2b02bf159051beed6ff3afc66fcfb7a30e8d2541
The channel type and the speech codec element is now
signalled to the BSC. The BSC checks both fields and
select a codec by its preference. The choosen speech
codec and the choosen channel (type) is returned to
the MSC. Currently the MSC ignores the return values
Change-Id: I5c422a1e831f572e493db9756cf45e7a0b7ec7d0
obtain the permitted speech and the prefered channel parameters
and signal it to the MSC with the channel type field.
Change-Id: I642480fa408dee7a4f40f7aab95f40383b3e91af
The MSC already has some basic call control handling mechanism, that
was primarily used with 3G before. However, the already existing
code that handles the 3G calls is also perfectly fine for handling
2G calls. This commit integrates the A interface without breaking
it for 3G.
Change-Id: Ib61cf2987823958314c9016d5a3f494c1aaaabbc
This patch adds the support for the RTP IP-Address/Port assignment.
The post communicated via the assignment request is now transmitted
via RSL/IPACC to the BTS. The Response containing the RX-Port at
the BTS side is communicated back to the MSC.
Since we plan to add a private MGCPGW to each BSC, this has to
be extended. Currently it only creates a direct connection to
the BTS. This will be introduced with a future patch.
Change-Id: I693e428b6bfdd8534eb5b88fa4d47dac20db88ea
So far CTRL was not used by anyone, and was still disabled from the initial
implementation of the OsmoMSC. Now we need it in osmo-gsm-tester.
Only add the MSC specific CTRL commands, the bsc_base_ctrl_cmds_install() still
needs to be split up.
Change-Id: I373279ccea8941c237330c3404c63d4924c5ffa0
The function gsm0408_dispatch() accepts a message buffer pointer
and accesses the l3h pointer. Even in a properly allocated
message buffer, this may lead into a segfault if the user forgets
to set the l3h pointer. This commit adds assertions to popup a
more expressive error message.
Change-Id: I43bd9bd1c170559aaa8dacaef25dba090744bcd5
This changes over to the new libosmo-sigtran API with support for
proper SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for
the IuCS and IuPS interfaces.
Only the ASP (client) is used, assuming that both the HNB-GWs and RNCs
as well as the MSCs and SGSNs are all connecting as ASP to some STP/SGW
which offers M3UA server functionality as well as point-code and/or
global title based routing.
Change-Id: I450e22d46e47eec350a152f7832428f226bf17fc
Tweaked-by: nhofmeyr (test expectation)
The ip.access nano3G needs the first RTP payload's first two bytes to read hex
'e400', or it will reject the RAB assignment. Add flag
patched_first_rtp_payload to mgcp_rtp_state to detect the first RTP payload on
a stream, and overwrite its first bytes with e400. This should probably be
configurable, but seems to not harm other femto cells (as long as we patch only
the first RTP payload in each stream). Only do this when sending to the BTS
side.
Change-Id: I5eff04dcb0936e21690e427ae5e49228cd459bd4
It seems merely luck that the tests worked so far without this wrap. Adjust
test logs now indicating where we actually send an Iu Release -- and leaving
gaping holes where we don't. To be fixed in another commit.
Change-Id: I770f5f058c72539ff4a2913b076fee8440248fd9
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
mgcp: hack RAB success from nano3G: patch first RTP payload
The ip.access nano3G needs the first RTP payload's first two bytes to read hex
'e400', or it will reject the RAB assignment. Add flag
patched_first_rtp_payload to mgcp_rtp_state to detect the first RTP payload on
a stream, and overwrite its first bytes with e400. This should probably be
configurable, but seems to not harm other femto cells (as long as we patch only
the first RTP payload in each stream). Only do this when sending to the BTS
side.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
In an upcoming commit, sgsn_vty_init() will require access to the global sgsn
config struct to initialize a generic VTY command with the proper config
destination address, see Change-Id I5b5b6a9678b458affa86800afb1ec726e66eed88.
Change-Id: Ie6b6e5422987586531a898e0c5b867623dbecb0f
Disable large parts of the code that depend on BSC presence. The code sections
disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of
adding the A-interface.
Don't set msg->lchan nor msg->dst.
Don't use lchan in libmsc.
Decouple lac from bts.
Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication:
Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to
different interfaces depending on the actual subscriber connection.
While iu_tx() is going to be functional fairly soon, the a_tx() is going to be
just a dummy for some time (see comment).
Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer
and an indicator for the Integrity Protection status on Iu (to be fully
implemented in later commits).
Add lac member to gsm_subscriber_connection, to allow decoupling from
bts->location_area_code. The conn->lac will actually be set in iu.c in an
upcoming commit ("add iucs.[hc]").
move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi().
libmsc: duplicate gsm0808 / gsm48 functions (towards BSC).
In osmo-nitb, libmsc would directly call the functions on the BSC level, not
always via the bsc_api. When separating libmsc from libbsc, some functions are
missing from the linkage.
Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also
add a _tx to gsm0808_cipher_mode():
* add msc_gsm0808_tx_cipher_mode() (dummy/stub)
* add msc_gsm48_tx_mm_serv_ack()
* add msc_gsm48_tx_mm_serv_rej()
Call these from libmsc instead of
* gsm0808_cipher_mode()
* gsm48_tx_mm_serv_ack()
* gsm48_tx_mm_serv_rej()
Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places.
Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC,
this will be done with an external MGCP gateway.
Remove LCHAN_MODIFY from internal MNCC state machine.
Temporarily disable all paging to be able to link libmsc without libbsc.
Skip the paging part of channel_test because the paging is now disabled.
Employ fake paging shims in order for msc_vlr_tests to still work.
msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values
for return val, to avoid dependency on libbsc headers. Make callable from
other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c
add gsm_encr to subscr_conn
move subscr_request to gsm_subscriber.h
subscr_request_channel() -> subscr_request_conn()
move to libmsc: osmo_stats_vty_add_cmds()
gsm_04_08: remove apply_codec_restrictions()
gsm0408_test: use NULL for root ctx
move to libbsc: gsm_bts_neighbor()
move to libbsc: lchan_next_meas_rep()
move vty config for t3212 to network level (periodic lu)
remove unneccessary linking from some tests
remove handle_abisip_signal()
abis_rsl.c: don't use libvlr from libbsc
gsm_subscriber_connection: put the LAC here, so that it is available without
accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of
transition: Iu and A will use this new field to pass the LAC around, but in a
completely separate OsmoBSC this is not actually needed. It can be removed
again from osmo-bsc.git when the time has come.
Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall
be added in osmo-bsc once the A-Interface code has settled. See OS#2389.
Related: OS#1845 OS#2257 OS#2389
Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
libvlr now delegates subscriber management to osmo-hlr, so the database no
longer represents a HLR. It basically only stores SMS, so reflect that fact in
the default database name.
Change-Id: I3289d68d3eb63aff940b48a25b584d5e83cd0197
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
SMS:
The SQL based lookup of SMS for attached subscribers no longer works since the
SQL database no longer has the subscriber data. Replace with a round-robin on
the SMS recipient MSISDNs paired with a VLR subscriber RAM lookup whether the
subscriber is currently attached.
If there are many SMS for not-attached subscribers in the SMS database, this
will become inefficient: a DB hit returns a pending SMS, the RAM lookup will
reveal that the subscriber is not attached, after which the DB is hit for the
next SMS. It would become more efficient e.g. by having an MSISDN based hash
list for the VLR subscribers and by marking non-attached SMS recipients in the
SMS database so that they can be excluded with the SQL query already.
There is a sanity limit to do at most 100 db hits per attempt to find a pending
SMS. So if there are more than 100 stored SMS waiting for their recipients to
actually attach to the MSC, it may take more than one SMS queue trigger to
deliver SMS for subscribers that are actually attached.
This is not very beautiful, but is merely intended to carry us over to a time
when we have a proper separate SMSC entity.
Introduce gsm_subscriber_connection ref-counting in libmsc.
Remove/Disable VTY and CTRL commands to create subscribers, which is now a task
of the OsmoHLR. Adjust the python tests accordingly.
Remove VTY cmd subscriber-keep-in-ram.
Use OSMO_GSUP_PORT = 4222 instead of 2222. See
I4222e21686c823985be8ff1f16b1182be8ad6175.
So far use the LAC from conn->bts, will be replaced by conn->lac in
Id3705236350d5f69e447046b0a764bbabc3d493c.
Related: OS#1592 OS#1974
Change-Id: I639544a6cdda77a3aafc4e3446a55393f60e4050
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
Related: OS#1592
Change-Id: Ie303c98f8c18e40c87c1b68474b35de332033622
Enable various components according to the build matrix during make distcheck.
Add python tests, osmo-bsc, nat, ...
Change-Id: Ic724cf61d44409337414dc58c8795896b4b97a8a
- bscs.config needed by the vty tests was not picked up as a dist file, because
its suffix is not 'cfg'. Rename to *.cfg. Apply this rename in
vty_test_runner.py and osmo-bsc_nat.cfg.
- Remove restart counters after external tests, otherwise distcheck complains
about uncleaned files.
- Add contrib/ipa.py to EXTRA_DIST, hence add a Makefile.am to contrib/.
Otherwise the python tests cannot find that dependency.
Change-Id: I42b55cb1125099afc3a8e3f87c0e398426b2e2a9
Before, each GSUP client would contact the HLR with an identical unit id, i.e.
"SGSN-00-00-00-00-00-00", with the result that some messages were sucked off by
the wrong client.
Pass explicit unit name from each gsup client user, so that OsmoMSC is "MSC"
and OsmoSGSN is "SGSN". Hence the HLR can properly route the messages.
Todo: also set some values instead of the zeros.
Unrelated cosmetic change while editing the arguments: gsup_client_create()'s
definition's oap client config arg name mismatched the one used in the
declaration. Use oapc_config in both.
Change-Id: I0a60681ab4a4d73e26fe8f0637447db4b6fe6eb2
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
We are building with libosmo-sccp tag 'old_sua' until the new sigtran has
been applied. Since osmo-iuh commit
0f88c110093935305143987638e46dc6db304a3e
"migrate osmo-hnbgw to libosmo-sigtran's SCCP/M3UA"
osmo-iuh requires libosmo-sccp master. A similar 'old_sua' tag is in place in
osmo-iuh.git, to match libosmo-sccp 'old_sua'. Do that to fix the jenkins
build of --enable-iu.
Change-Id: I70f731db0b74ed48ae6dd713ed4c3247222ef0de
* use LT_INIT instead of AC_PROG_RANLIB
* remove redundant libbsc entries
The default (for both manual and .deb builds) is to use shared build (as
before) - the static build is entirely optional.
Based on work by Sergey Kostanbaev <sergey.kostanbaev@gmail.com> and
Alexander Chemeris <Alexander.Chemeris@gmail.com>.
Change-Id: Ibcd1da98302413182c85e25c4cb7d69d9e38c35a
While fixing potentially incorrect memory access, the check for maximum
number of supported BTS features was incorrectly adjusted instead of
feature vectore length check next to it. Fix this by adjusting checks
properly and adding comments to avoid future confusion.
The error was introduced in a60bb3dd28.
Change-Id: I06d2498d730624d5da535f6add6fa98d004714ae
When we are performing Rx sensitivity testing on a BTS, we want to
deactivate the connection failure criterion / radio link timeout, i.e.
no matter how many SACCH frames in uplink are failed to decode, the BTS
should never close the channel.
OsmoBTS Change-Id I736f21f6528db5c16fa80cdb905af20673797be5 covers a way
how this behavior can be requested from the BTS via an OML attribute.
This patch adds support to the BSC to actually set that attribute.
Do not use this in production networks, as the BTS will keep open radio
channels indefinitely even if the phone is gone and no longer
transmitting anything. This is a pure testing feature.
Change-Id: I6cb94e0f024934f7baeeb728ca9ed3042fbf16d2
Previously the SI generation lead to setting the BCCH SIs for all TRX in
a multi-trx setup. This is because we create the SIs globally but
si_valid appears to be limited to the 'current' trx. Warn if we attempt
to set SIs for the BCCH on a trx that does not have a BCCH.
Change-Id: Ie0e288252a2e7709c4dae16b96a0b1512278847f
Tweaked-by: Max <msuraev@sysmocom.de>
To support segmented SI2quater as per 3GPP TS 44.018 we'll have to
support multiple SI messages (up to 16 for SI2q) for a given type in
contrast to existing 1:1 mapping:
* expand storage space to hold up to 16 SI messages (spec limit)
* add assertions for budget calculations
* generate multiple SI2q messages
* adjust SI2q-related tests
* use precise check for number of SIq messages instead of approximate
estimation
Change-Id: Ic516ec9f0b821557d9461ae9f1c0afdd786f3b05
Related: OS#1660
* move SI2quater related defines to shared header
* add define from OsmoBTS which checks for presence of a given SI
message in gsm_bts struct. Rename it to avoid conflicts with OsmoBTS
code and to match naming conventions of similar macros.
Change-Id: I11432c93c772d1ead6d45a7bb0f1d13d492c82f1
Related: OS#1660
Use sizeof target BTS feature storage to make sure we always fit into
pre-allocated memory. Also use it for log check.
Change-Id: Ib107daa6e8b9bc397a10756071849f8ff82455d5
Fixes: CID 170581
osmo_talloc_replace_string() was introducd into libosmocore in 2014, see
commit f3c7e85d05f7b2b7bf093162b776f71b2bc6420d
There's no reason for us to re-implement this as bsc_replace_string
here.
Change-Id: I6d2fcaabbc74730f6f491a2b2d5c784ccafc6602
In addition to compile-time defined BTS model features we also need
run-time BTS features reported by BTS via OML. This should be shared by
BSC and BTS. To accommodate for this, add following:
* features bitvec to gsm_bts struct
* features descriptions
* comments to avoid confusion between 2 feature sets
* helper functions to set/query particular feature
* upper boundary on number of supported features and assertion for it
Change-Id: I02bd317097ba66585c50ebd4e8fc348f6dc3dad9
Related: OS#1614
Rename gsm_bts_has_feature() -> gsm_btsmodel_has_feature() and adjust
type signature to match gsm_btsmodel_set_feature() function and avoid
confusion with upcoming functions to check/set BTS features reported
over OML.
Change-Id: I97abdedbef568e0c2fbd37c110f7d658cf20e100
Related: OS#1614
Since commit b4999b60d4 we created PCU
sockets at hard-coded paths in the filesystem by default for all BTSs.
This is inflexible and prevents the use of multiple BSC instances on a
single filesystem, or the placement of the sockets in a more secure
location than /tmp.
The new approach with this patch is that
* no PCU sockets are created by default
* only for those BTSs where a 'pcu-socket' is configured via VTY,
the socket will actually be created
Change-Id: Ie9079470584777dcc31f85f9bf0808f479156ccb
Closes: OS#2293
Using this command, one can modify the RTP stream associated with a
given logical channel and (re)direct it to a specified IP:Port.
Change-Id: I63e03b932038a4e2f6d51c5541b52e4a42df27bf
Sometimes it is useful to manually activate (or decativate) a given
logical channel from the VTY. Doing this on the BSC (rather than the
BTS) ensures that the BSC knows that this timeslot / channel is
allocated and there is no risk to have clashes between the BSC "owning"
the resources and the BTS allocating some by itself.
Change-Id: I44fc3904678eb48bd3ab1a3da8c0c265fa082e0d
We can also move the string-to-numeric conversion inside vty_get_ts() to
reduce the amount of work required in the caller.
Change-Id: I2a74ed06e90e39d39f53fff39bb96df172728c0e
Resolving a timeslot based on its numeric identities is a generally
useful function, so lets' factor that out.
Change-Id: Id2570232f82542487a1133be7efb1dc1eb3029a8
We generally use const pointers for input arguments. Also, document
input/output arguments of function and add spec reference.
Change-Id: I2532cde69a18e3b021f7371e68f67a28a43d8b5f
The pcu sends us an already made up MAC-Block that contains the
paging request. pcu_sock.c is parsing this paging request
wrongly and fails silently, which results into a dropping of the
request.
This commit fixes the parsing problems.
Change-Id: Iefef08123bdc351afd8287d3f27ebf0ae58a6e7d
The PCU sends imm.ass messages in response to a rach request. Those
messages need to be forwarded to RSL in order to get them send. This
commit introduces the required functionality for that
Change-Id: Ice099c4ed7008200ed179e581aba1899c6c29455
Ericsson allows to attach a reference to immediate assignments. A
confirmation of the transmission is then sent back, but only containing
the reference, not the whole RLC packet.
Change-Id: I945f49e62e2a74a7906e2d49940927773edd04a9
The BSC-located PCU case looks to the PCU like a BTS-located PCU with
"direct PHY" access, i.e. the data related primitives are communicated
from the PCU directly towards the TRAU Frames or whatever transport
method is used between CCU and PCU.
In order to make the PCU believe that, we need to pass in a 'layer 1
handle'. As we don't use it, we can just pass any non-zero value and be
happy.
Change-Id: I8170bd4134904702b6b272e496100361ba473cbc
Instead of 20, use the actual buffer sizes of struct sw_load, which are 255.
Previous code would truncate a longer string at 20 without(!) NUL termination.
In the _len members, store the actual length copied. In previous code, if the
source string were longer than 20, we would store only 20 (without NUL term)
but still reflect the longer length of the source string.
Fix both of these issues for sw_load.file_id / file_id_len and
sw_load.file_version / file_version_len.
Change-Id: I2e34a1348a290d3f58dd830d08da65b94b3270db
Send SMS RP ERROR with a failure cause that relates to
the status returned by the ESME in the deliver_sm_resp.
Actual mapping array is limited as most phones I tested
don't seem to care about the failure cause anyway,
although some will display a different notification for
GSM411_RP_CAUSE_MO_NUM_UNASSIGNED
Change-Id: I61fb2d9ef4f2d2eabdc49b53d9966ad328d15e51
The newline and $NULL manage to append a trailing space to the 'openbsc' dir.
This was broken in commit 7b6673fa06
"Consistenly format variables in */Makefile.am files"
by Change-Id Ifa21513c007072314097b7bec188579972dc1694
Add a comment to prevent this in the future.
Reported-by: Andreas Mueller <andreas.mueller@criticallabs.org>
Change-Id: I218027459e3b2aaa817d91eb3f69d9c0b10dcd4e
The gsm_data_shared.h header is installable and used by OsmoBTS so it
should not include any private (non-installable headers) to avoid
OsmoBTS' build failures.
Change-Id: Ic25031101fc01bd732fe691132c081ad05fa6a4b
Request BTS attributes via OML on connection and parse the response:
request/parse incoming response as sw-config.
Note: only basic BTS-wide KV attributes wrapped in sw-config are
supported for now.
Change-Id: I589be51daca0cb9e1f3473b93e910e46b06e23ae
Related: OS#1614
Previously only the existance of bts->si_common.si2quater_neigh_list was
checked but not the actual number of EARFCNs in it. Fix it by using
si2q_earfcn_count() and adjust tests accordingly. While at it - reformat
tests to include extra information.
The correctness was checked manually by inspecting GSMTAP output.
Change-Id: Ic4fb2a9e870db66cac58b1e8d113587b30d64ce2
Related: RT#8792
In preparation for extended SI2q messages:
* add SI2q-specific accessor macro
* add *_offset variables to gsm_bts struct
* internalize memory check while generating rest octets - introduce
budget concept (number of bits available in a given message)
* internalize *arfcn_size() functions as they are not needed outside of
si2q_num() anymore
* change rest octets generation to work with gsm_bts struct directly
* do not generate rest octets if no SI2q is necessary
* adjust unit tests accordingly (cosmetic changes only to avoid
regressions)
Requires: I92e12e91605bdab9916a3f665705287572434f74 in libosmocore
Change-Id: Ib554cf7ffc949a321571e1ae2ada1160e1b35fa6
Related: RT#8792
* use define for number of attributes instead of magic number
* add sub_model to gsm_bts struct
* expand number of BTS features
* mark attributes parameter to abis_nm_get_attr() as const
Change-Id: I7ecb0c4339530d3a8354a2f94b34063dda87e030
Related: OS#1614
The VTY config allows above 32bit range extensions, but
db_subscriber_alloc_exten() was unable to generate extensions outside of 32bit.
Add VTY regression test and fix the problem by using proper 64bit types.
Related: OS#2253
Change-Id: I9afe6a8833004ecd2f3f936b2d5aa4de8e7dbcb0
Fix parsing of the 'subscriber-create-on-demand random' VTY: atoi() is not
enough to include the specified range of 1-9999999999.
Use atoll() instead to ensure a large enough number space also on 32bit
systems.
(Note: for me, atoll() truncates at 32 bit when <stdlib.h> is not included.)
Add a VTY regression test for this.
Related: OS#2253
Change-Id: I353e04481ec567adca383d6b51ba8fb865eed73e
* move value_string definition and corresponding functions for BTS type
to shared header to make it re-usable by OsmoBTS
* use consistent function naming
* add similar functions for BTS variant
* add enum to be used by OML Attribute Reporting to distinguish between
type, variant and other info
Change-Id: Ida94725a6fce968443541e3526f48f13758031fd
Related: OS#1614
Hold on with the GSM 04.11 RP-ACK/RP-ERROR that we send to the MS until
we get a confirmation from the ESME, via SMPP DELIVER-SM-RESP, that we
can route this sms somewhere we can reach indeed.
After this change, the conversation looks like this:
MS GSM 03.40 SMSC SMPP 3.4 ESME
| | |
| SMS-SUBMIT | |
|------------------->| |
| | DELIVER-SM |
| |---------------->|
| | |
| | DELIVER-SM-RESP |
| |<----------------|
| GSM 04.11 RP-ACK | |
|<-------------------| |
| | |
Before this patch, the RP-ACK was sent back straight forward to the MS,
no matter if the sms can be route by the ESME or not. Thus, the user
ends up getting a misleading "message delivered" in their phone screen,
when the message may just be unroutable by the ESME hence silently
dropped.
If we get no reply from the ESME, there is a hardcoded timer that will
expire to send back an RP-ERROR to the MS indicating that network is
out-of-order. Currently this timer is arbitrarily set to 5 seconds. I
found no specific good default value on the SMPP 3.4 specs, section 7.2,
where the response_timer is described. There must be a place that
describes a better default value for this. We could also expose this
timer through VTY for configurability reasons, to be done later.
Given all this needs to happen asyncronously, ie. block the SMSC, this
patch extends the gsm_sms structure with two new fields to annotate
useful information to send the RP-ACK/RP-ERROR back to the MS of origin.
These new fields are:
* the GSM 04.07 transaction id, to look up for the gsm_trans object.
* the GSM 04.11 message reference so the MS of origin can correlate this
response to its original request.
Tested here using python-libsmpp script that replies with
DELIVER_SM_RESP and status code 0x0b (Invalid Destination). I can see
here on my motorola C155 that message cannot be delivered. I have tested
with the success status code in the SMPP DELIVER_SM_RESP too.
Change-Id: I0d5bd5693fed6d4f4bd2951711c7888712507bfd
Use textual representation for message type and protocol descriminator
in case of Gb parsing errors.
Change-Id: Ida925258be119619d8705361730c554a130b75bc
Related: SYS#3610
Previously vty always used additional checks even for GEA0 (no
encryption) which resulted in misleading warnings. Fix this by
adding explicit check for GEA0.
Related: SYS#3610
Change-Id: I1ee468ab3298076d4cb5c7b1f6293c07e272417b
Previously we required pcap.h unconditionally which causes embedded
build failure because it's not included in current version of out poky
toolchain. We can add it to toolchain but it's only necessary for
utils/osmo-meas-pcap2db which is not built for sysmobts anyway so it's
easier to just make this dependency optional and build osmo-meas-pcap2db
only if it's available - similar to the way we build osmo-meas-udp2db.
Related: SYS#3610
Change-Id: I77a5f7eafe0282abedacffad6a9bcb0a8f2b5caa
Previously it was only in gsm_bts_model which is not initialized on BTS
side. It's more convenient to have it in the struct which is available
to BTS as well.
Change-Id: I54fde8c4ccd5d994af08074f5864446e79a93a25
Related: OS#1614
Supporting SI2quater as per 3GPP TS 44.018 will require chnages to the
way System Information is stored because it uses 1:n instead of 1:1
mapping between SI type and generated SI content. This should not affect
other SI types though. To facilitate this transition:
* convert the code to always use GSM_BTS_SI helper instead of accessing
buffer directly
* make helper more robust by adding extra parenthesis
* add similar helper for gsm_lchan
* add function estimating number of SI2quater message to hold configured
number of (U|E)ARFCNs
* add SI2q index/count fields and pass them to rest_octets generator
explicitly
* internalize buffer access in generate_si* functions
Change-Id: I74e4e3cb86364cec869a1472a41b4a95af0d50dd
Related: RT#8792
OpenBSC does not produce any installable libraries, only header files so
this section is unnecessary.
Change-Id: I4c563d775a84f41f82404e0eaba1a25fdbaac1a5
* set proper flag when saving MS Timing Offset
* use gsm_subscriber's IMSI or lchan's name if bsc_subscriber is unknown
* add comments with spec reference
* store/display MS Timing Offset instead of raw Timing Offset field from
RSL
* Compute MS Timing Offset [-63; 192] from Timing Offset field [0; 255],
adjust structure gsm_meas_rep with proper type to store it
Change-Id: I7e003d23a6edb714c5f17688fd6a8edac131161d
Related: OS#1574
It is defined in the file and used twice in there, so let's use it for
all of them which makes code smaller and more clear.
Change-Id: I9fac7cabedff74f8f6293ad8b54420229b80aa71
* add version string to gsm_bts
* add PCU version string to gsm_bts
* rename GSM_BTS_TYPE_OSMO_SYSMO -> GSM_BTS_OSMOBTS to avoid confusion
between BTS model and variant
* add variant enum to gsm_bts_model using enum with variants for each
hw vendor of OsmoBTS
* show connected PCU version (if available) in vty via 'show bts'
This will come in handy when logging details regarding particular BTS
reported via OML, see:
Related: OS#1614
Change-Id: I6710d53115f34634a7b70969cc05fd5c72ff8ab2
This option allows to enable or disable TCH/F allocation on the
TCH/F_TCH/H_PDCH timeslots. Until now, source code modification
was required to enable this feature.
Related: OS#1778
Change-Id: Id18cab25844dc854a66b4e2713e90c3f43afa712
From a human admin viewpoint it doesn't make sense to count the messages sent:
When we use TMSIs, we first send a LU Accept with a new TMSI, and then expect
the MS to respond with a TMSI Realloc Complete message. When that fails to come
through, the LU actually ends in failure, even though a LU Accept was sent.
If a conn breaks/vanishes during LU, we cancel the LU without sending any reply
at all, so the failed LU would not be counted.
Instead, count Location Updating results, i.e. completion and failures.
(With the new VLR developments, LU counters need to be triggered in completely
different places, and this patch prepares for that by providing sensible
counters.)
Change-Id: I03f14c6a2f7ec5e1d3ba401e32082476fc7b0cc6
Explicitly check for and log PCU version received from BTS via OML alert
message.
Change-Id: I3c88663d4e2887a4038b4c3f1387128295b8934e
Related: OS#1614
Add python client which converts TRAP messages into SOAP requests and
perform corresponding actions.
It can be used as follows
./soap.py -d -w http://example.com/soapservice/htdocs/wsdl/test.wsdl
See ./soap.py -h for additional options.
Change-Id: I82844ec7a302bac30d6daee9ebca2188fd48ca46
Related: SYS#3028
ericsson can handle a reference at the end of a imm assign command which is used in
the confirm response. The confirm response is only sent if the trailer is present.
Change-Id: I88560291b5a3a3d7a0bac4d3c089b45f1f6b297f
When the BTS is configured to use a SuperChannel and it is using a
unix domain socket based transport towards the L2TP daemon, then
we must instruct the L2TP daemon to instruct the SIU to change the Abis
Lower Transport Mode using the ALTCRQ / ALTCRP L2TP signalling.
Change-Id: I672bfaa09c42fbeb0c8459f24b2222b952de954b
Do not print anything to stdout directly - use proper logger object
instead: either the one supplied by IPAFactory user or default to NO-OP
NullHandler logger.
Change-Id: Ic3417095a6e8848f0acabb46a9e64c0197b736e2
Related: SYS#3028
The VTY tests assume that $top_builddir == $top_srcdir. Use the script's
location from sys.path[0] to find the correct locations of example configs even
when building in another directory.
Change-Id: I2731f361e3b72d0980968e6cf83594ea450db7c2
Previously any OML NACK message will result in BSC dropping OML link to
BTS which makes it impossible to use optional OML messages which might
be unsupported by BTS. Fix this for 3GPP TS 52.021 §8.11.1 Get
Attributes message. Also, log human-readable NACK name to see what
exactly causing OML link drop.
Change-Id: Ib8af2872c27abb793172ec59bdc145b8d54f83da
Related: OS#1614
In change-id Iadf43f21e0605e9e85f7e8026c40985f7ceff1a3, libosmocore changes
from incrementing SQN after tuple generation to incrementing SQN before tuple
generation. Thus we now need to pass desired_sqn - 1 to get the same tuples.
Change-Id: Ifeda71e713bb60dcd31ac651f461b714cfa39b5c
Related: OS#1968 OS#1969
The timer T3186, which is described in 3GPP TS 44.060, is using 3
bits of the si13 mac block. This requires special encoding. In the
case of T3186, the value is encoded by the formula: bits = t/500-1.
Our implementation uses the formula bits=t/500, which is incorrect.
Change-Id: Ifd340c536cff2d1c4b1b3677a358ea95438801eb
Option "logging level ... everything" is broken for quite some time and
might be deprecated in future. Replace it with "logging level ... debug"
in config examples.
Change-Id: I828ef7671b4fb38717526a18ff8e9a5428cd511e
Related: OS#71
bsc_control.py lacks a copyright header. This commit adds the
copyright header from ipa.py to bsc_control.py.
Change-Id: Ie70bf686ee9bb157198e02bf8d946abf56adc82a
Fix uninitialized memory access warning.
"Conditional jump or move depends on uninitialised value"
Found by valgrind.
Change-Id: Ibc2d585c5db899e6af20104211e32faf3822633a
osmo-python-tests now includes code that retries connecting the VTY socket and
needs no external sleep()ing. This flies through most tests without any sleep()
at all.
See osmo-python-tests.git change-id Icc337f52a93d5fe31fc4ff235ccaf4e0fe75fa39
Change-Id: I42161d9716fe5bb0ef1c56e4bfb770bb99bbca7a
In a future commit, gsm_subscriber will be replaced by vlr_subscr, and it will
not make sense to use vlr_subscr in libbsc. Thus we need a dedicated BSC
subscriber: struct bsc_subscr.
Add rf_policy arg to bsc_grace_paging_request() because the bsc_subscr will no
longer have a backpointer to gsm_network (used to be via subscr->group).
Create a separate logging filter for the new BSC subscriber. The implementation
of adjusting the filter context is added in libbsc to not introduce
bsc_subscr_get/_put() dependencies to libcommon.
During Paging Response, fetch a bsc_subscr from the mobile identity, like we do
for the gsm_subscriber. It looks like a duplication now, but will make sense
for the VLR as well as for future MSC split patches.
Naming: it was requested to not name the new struct bsc_sub, because 'sub' is
too ambiguous. At the same time it would be fine to have 'bsc_sub_' as function
prefix. Instead of struct bsc_subscriber and bsc_sub_ prefix, I decided to
match both up as struct bsc_subscr and bsc_subscr_ function prefix. It's fast
to type, relatively short, unambiguous, and the naming is consistent.
Add bsc_subscr unit test.
Related: OS#1592, OS#1594
Change-Id: Ia61cc00e8bb186b976939a4fc8f7cf9ce6aa3d8e
Add MS TIMING OFFSET (3GPP TS 48.058 § 8.4.8) and P offset (3GPP TS
45.010 § 1.2) which can be used to compute MS TO from known TA.
This will be used by osmo-bts (see
I4dfe5c48834a083e757d5de3236a02e15a238b28) to provide MS TO as part of
RSL MEASUREMENT RESULT.
Change-Id: I8bda57c8d6c15bbb803eca708931556dae118a00
Related: OS#1574
When the IMSI ACL is maintained via the VTY, users may enter IMSIs
without leading zeros. Especially in test environments, where
MCC=001 and MNC=01 is common, it is likely that someone enters the
corresponding IMSI (001010000000001) without the two zeros at the
beginning.
This patch fixes the problem by sanitizing the IMSI, eventually
missing zeros in the beginning will be automatically added.
Change-Id: I56ba0da61978bbdce71d0e320166c52b20b42517
* print pdp->address instead of mm->imsi if mm is NULL
* print mm->imsi in debug log (move it below NULL check)
Change-Id: I4fbf5a54019a46612fbc528d61120182738f9205
Add via_ran to gsm_subscriber_connection to indicate whether a conn is coming
in via 2G/GERAN/A-Interface or 3G/UTRAN/Iu-Interface. Prepares for Iu, but
also for libvlr to decide between GSM or UMTS Auth.
Until actual Iu support is merged to master, this indicator will aid VLR unit
testing.
At some point we may also add RAN_GERAN_IU; it's not on the agenda yet, but to
clearly distinguish the names if we want to add it, explicitly name the ones we
have RAN_GERAN_A and RAN_UTRAN_IU.
Change-Id: I93b870522f725170e4265a5543f6b680383d7465
Make NEIGH an array of Javascript objects, otherwise the JSON is not parseable
when neighbours exist
Change-Id: I42029f40bf357adbb2f3c71cdcbafbc21090e348
Remove the fuzzer interface that was partially implemented in
gsm_04_08.c and silent_call.c is causing problems when an
SMS is sent during an active silent call. The reason for this
is that gsm0408_dispatch() in gsm_04_08.c would decide to
rout all uplink traffic to silent_call_rx() in silent_call.c.
silent_call_rx() is a stub function that discards the data.
This patch removes the fuzzer interface code by placing ifdefs
around it, so that it can be re-activated by experimentators.
Change-Id: Id500197d58663b3f4b1756136343670388b0a4bc
Similar to a recent patch in osmo-python-tests for VTY based tests, but this is
for the Ctrl tests.
The TestCtrlBase tests gave a constant sleep(2) grace period for the process to
startup. This causes tests to take minutes for no reason at all.
Add code to TestCtrlBase to try and connect right away, retrying up to three
seconds in .1 second intervals. This flies through most tests without any
sleep() at all.
Change-Id: I06569767153838bd9cd3edac001df5f6c567874c
When running the testBSCreload test in close succession, I get a "Connection
refused" error because the socket is still in TIME_WAIT state. Passing the
SO_REUSEADDR flag allows reusing the addr despite a TIME_WAIT socket.
Change-Id: I941851b062999ab4b962430f7b27c19935993e0a
If a pdp context is created a xid request is sent right after
the pdp-context-ack message. The sending of the pdp-context-ack
and the xid message is triggered from the GGSN via the GTP
interface.
When the pdp-context-ack message is not received by the MS, it will
send the pdp-context-request again. A lost pdp-context-ack is resent
by the SGSN directly so that the mechanism described above does
not work for pdp-context-ack resents.
This commit adds code to trigger the sending of xid messages also
for resent pdp-context-ack messages.
Change-Id: Ice66790803154310a61a70a54be76cec539c97a7
On 'auth-policy remote', the SGSN requires GSUP server address and port. If it
was missing, the SGSN would print a VTY warning and run anyway. Make this error
more fatal: print an error (flattened a bit) to stderr and abort the program.
Move validation of the GSUP server data presence out of the VTY command itself
and into the config reading function. This way the GSUP server config can be
given anywhere, including below the auth-policy config (was required above).
Don't care about setting the auth-policy to remote with a telnet VTY, because
in that case the GSUP client won't be started anyway.
Change-Id: I4d8db910c32abd8579d3c9b9f0b2cb3a9a6dfe4c
The general infrastructure for UMTS AKA is already in place:
* GSUP with capability to send us auth_vectors that contain
either triplets or quintuples
* mm_context that holds such auth_vectors
Add:
* capability to send UMTS AUTN in GMM AUTH REQ
* parse extended UMTS RES
* on auth response, validate expected AKA with vector and received res/sres
* add Auth Failure message to receive resync AUTS token and
* send to HLR
* clear out-of-sync auth tuple
* enter new state for when we're waiting for HLR to resync and send new
tuples so that the next Auth Request will be handled
Original first half of this patch by: Harald Welte <laforge@gnumonks.org>
Full UMTS AKA procedure including AUTS resync tested to work against OsmoHLR
with R99 USIM and Milenage algorithm.
The sgsn_test.c needs adjustment because we're checking the vector's auth_types
now.
Depends: libosmocore change-ids
I277fb3d407396dffa5c07a9c5454d87a415d393f
If943731a78089f0aac3d55245de80596d01314a4
Related: OS#1956
Change-Id: Ie6a0cefba5e4e7f02cc2eaf6ec006ac07d5c1816
Each running test would open up another socket without ever closing unused
ones. Close the sockets after each test is done.
Change-Id: I0a42caab3bb8c9c9d04b033e4de9efe0ca8fd2af
Prepare for replacing gsm_subscriber with vlr_subscriber. vlr_subscriber will
not make sense to be used in gprs, so have a dedicated GPRS subscriber struct.
(Could change if the gprs code were to use libvlr; is currently independent).
Related: OS#1592
Change-Id: Ia8b391ee009c8545763cba04505be3947835120e
With the OsmoMSC program coming up, the name osmo_msc_data becomes even
more confusing than it already is. Clearly indicate it as libbsc's data of
a remote MSC by prefixing with bsc_.
Also, the Osmocom community has in the meantime agreed to have the osmo_
prefix only in libosmocore, to avoid naming conflicts in case things are
moved there. So while renaming anyway, also drop the osmo_ prefix.
Change-Id: I0dfbcb7d1a579211180f71319982820d8700afab
With the OsmoMSC program coming up, the name osmo_msc_data becomes even
more confusing than it already is. Clearly indicate it as libbsc's data of
a remote MSC by prefixing with bsc_.
Also, the Osmocom community has in the meantime agreed to have the osmo_
prefix only in libosmocore, to avoid naming conflicts in case things are
moved there. So while renaming anyway, also drop the osmo_ prefix.
Change-Id: I13554563ce9289de126ba0d4cf329bafcda35607
We're discarding the name OsmoCSCN for the benefit of OsmoMSC. But "CSCN" has
already crept into the master branch in two places; apply the rename.
See OS#1958
Change-Id: Ib4274eb3c172ada1fe7f05746740b456370bc93d
Each running test would open up another socket without ever closing unused
ones. Close the sockets after each test is done.
Change-Id: Ie433c8560de54f9a9d05fa07c44bae3126d19b30
Doesn't make sense to switch this to struct vlr_subscr when it isn't used at
all. So let's remove it.
Change-Id: Ifa5901f8bf1aed3981841d24d4ec8d659f3de7a9
In libosmocore, my patch was merged to master a bit too soon. To accomodate the
request for naming that matches the general "LOG" prefix instead of "LOGGING",
a fixup was committed to libosmocore. Adjust for that.
Original patch: change-id I5c343630020f4b108099696fd96c2111614c8067
The fixup: change-id I424fe3f12ea620338902b2bb8230544bde3f1a93
Change-Id: Ib2ec5e4884aa90f48051ee2f832af557aa525991
The LCHAN and BTS filter contexts are actually never used, so drop them until
someone adds them properly.
For now use only LOGGING_{FILTER,CTX}_VLR_SUBSCR. Some of these will change to
_BSC_SUBSCR once struct bsc_subscriber is introduced, and later on, struct
gsm_subscriber will be replaced by vlr_subscriber so that the names will match.
Depends: libosmocore change-id I5c343630020f4b108099696fd96c2111614c8067
Change-Id: Ifa82f6a461ad4c0eeddb8a38fb3833460432d16b
Handle Delete Subscriber Data GSUP message from HLR to disable Packet
Services for a given IMSI.
Change-Id: I6b9b494fa58bcb95bd550c49f8204f00f8fdf628
Related: OS#1645
To be paranoid, catch a NULL subscriber and/or bts in
subscr_update_expire_lu(): print an error log and avoid segfault.
(I'm not sure this would really happen in a normal situation.)
During aggressive testing of Paging timeout, I came across this segfault in
msc_release_connection() when conn->expire_timer_stopped is set but
conn->subscr is NULL, at the subscr dereference after:
if (conn->expire_timer_stopped)
subscr_update_expire_lu(conn->subscr, conn->bts);
I brought this situation about by a fabricated Paging fault, i.e. in
gsm48_rx_rr_pag_resp() return 0 and don't call gsm48_handle_paging_resp() at
all. Thus conn->subscr is still NULL when expire_timer_stopped is 1.
When looking at CM Service Request handling, the conn->subscr is set before
setting expire_timer_stopped = 1, which is a saner thing to do. But without my
mad 'return 0', there is in fact no way to have a NULL subscriber there.
It looks like all other code paths already do the same, but it's not that
obvious (e.g. _gsm48_rx_mm_serv_req_sec_cb()). So rather catch this case of
NULL conn->subscr, and while at it catch NULL bts as well.
Change-Id: I430dd952b2b928bea7f8360f1e01bb3cccb0a395
* add vty command to set E-UTRAN_PRIORITY, THRESH_E-UTRAN_low and
E-UTRAN_QRXLEVMIN according to 3GPP TS 44.018 Table 10.5.2.33b.1
* remove old command which does not support those parameters
Change-Id: I36dcc79f7b7a02036e74720923d0df1a2a2db504
Fixes: RT#8792
Log more data related to channel allocation:
- channel type
- number of paging attempts
- timers fired
Change-Id: Ib417a9c942c17b902dd80ff555cd9da5f91bff48
Since ce9fec3e896571835ac5bfd2980d6836f2b29f0d libosmocore ignores
parameters to log_vty_command_* functions. Hence parameter of
logging_vty_add_cmds() is ignored too. As we depend on much later
libosmocore version anyway, we can simplify code somewhat by removing
parameters which will be ignored anyway.
Change-Id: I62f752fd88f1d8fefa563648f9864c7c31f87991
Postfix the ran type to clarify the purpose.
Because of the new support of the Iu ran type, there are 2 functions to allocate a mm ctx.
For Iu it's sgsn_mm_ctx_alloc_iu(). For gb it should be named in the same way.
Change-Id: Ic49009e8c20c12308855e1409c09004698c79b95
The fix introduced in dac5867af5 did not
work because autotools in our OE are too old. Use alternative way to
include custom m4 macros to fix it.
Change-Id: I5fe6d1180c2624cfe1d3673314f6846527a43464
Parse the longer UMTS res from the extended Auth Response Parameter IE.
Parse the R99 Authentication Failure and AUTS in case of cause
GSM_REJECT_SYNCH_FAILURE which indicates a SQN re-sync request.
Both still end in 'not implemented' error logs, which are the places where the
upcoming VLR that supports UMTS AKA will integrate.
Depends on recently added constants in libosmocore in
commit 55a43b801385e07a484217925ecf2379b9f54fcf
aka change-id I745061ce8eb88aa23080dadcdbfe2d703c362a30
Change-Id: I4868bbeedc32fa7b8d03b9e3c66db618543d38ec
The currently unused function abis_om2000_vty.c:con_group_del()
allows deleting OM 2000 connection groups. This commit adds a
matching VTY command to make use of it.
Change-Id: I39a90b06e19356c536cacd1c923e195dd305ab80
'self' will not be accessible in that context, so this patch isn't
useful.
This reverts commit b39053ad6d.
Change-Id: Ic1a9ba5fdfd7bdc6c5cf0974e8c637ae23b81ece
To be able to do R99 UMTS authentication, we need to send along AUTN bytes in
the Authentication Request. Add autn parameter to gsm48_tx_mm_auth_req() and
conditionally append the R99 AUTN TLV to the Authentication Request message.
Change-Id: I0d644559088706aa06b42b9bfe1f8c21ca6fa4da
Add verbose logging as well as three retries around the place that often
fails on our build server with a 'Broken Pipe' error.
Change-Id: I8851b76b2d7b87dd500ae40f47e6bea716ef3fc4
Check conn->subscr against NULL.
gsm0408_rcv_cc() dereferences many conn members without checking presence: the
bts and lchan members may be expected to be NULL in the ongoing MSC split and
3G developments.
But the conn->subscr is initially NULL, so an MS sending a CC message before
something like a LU or CM Service Request will result in a segfault. Prevent
that.
Note: the upcoming VLR will be more restrictive on what messages are processed,
this is a "backport" to the situation on current master.
Change-Id: If067db7cc0dd3210d9eb1da15be6b637795a3ecf
Added in recent commit 42def7205b
"Implement VTY configuration to control Early Classmark Sending"
Change-Id: Iaf640fa6e1f234f594fb8dc06f716d3d3e95eb2a
all other objects always use the MO instance. The existing code
likely is due to copy+paste mistakes.
Change-Id: Ie0a31cd93993da10f31eecf530a5a05773c11eb1
It is one of these changes that should have never worked but did
for a long time. Only recently a corrupted GTP message was seen.
The code in ccd2312d10 tried to
solve the right problem but was deeply flawed.
* Make the code operate on the copied message and not the original
one that is deleted by the underlaying layers on return
* Add an out variable to determine if the msgb should be deleted
and assume that by default it will be deleted.
Change-Id: I564526e7cde2b8a2f0ce900492cd38fc23c176a7
It is generally not a good idea to add more and more external
dependencies unless absolutely needed. autoconf-archive is a good
example of that, as we need to update all build machines, and older
OpenEmbedded versions do not appear to have (the right?)
autoconf-archive recipe. Provide local copy of necessary m4 files to fix
the build there.
The dependency to autoconf-archive was introduced in Change-Id
Ied9c950dafa65f324cf31298b13b590f56139700
Change-Id: Iacc1958b471ec3fc65307259039e1d496845f528
The ABI of libgtp changed and we require a new library now. Drop
the SO_VERSION from the library name and just depend on libgtp-dev.
Change-Id: Ib301b27e2c08fda827b55820389247e27e5e8fc7
in gprs_gmm.c:gsm48_rx_gmm_ra_upd_req the variable reject_cause
is not initalized, which is ok, since it gets initalized before
the jump into the "rejected" path. However, the compiler still
throws a warning. This commit fixes the problem by preinitalizing
the reject_cause to GMM_CAUSE_PROTO_ERR_UNSPEC
Change-Id: I84cffb631e4cad3d4748512b47e3876208f53727
In some cases, when successive mobile originated calls are made, the LAPDm UA
message gets lost because the channel is relased to early. Too overcome the
problem we do not send release indications immediately. Instead a flag will be
set and the message stored and sent on the next TCH-RTS-IND.
This commit adds the required flag and the msg-buffer to struct gsm_lchan.
See also coresponding change in osmo-bts.git:
Change-Id Ie4f70c75f0137b4bd72d579b3a32575bac2fca38
This patch is is a slightly improved/reformatted version of:
95d1f15ad1
Change-Id: I15fc1ef8e9e83f009bde96de9a8e95702cffbce6
The SI3 rest octests contain a flag that indicates if early classmark
sending is allowed in this cell or not. So far we always set this to
one, now it is configurable using the 'early-classmark-sending' command
at the VTY node.
Change-Id: Ia0b1cc5ab45673f3da70c59ae8917eba343f9862
There were some members that we neither set nor read, so let's
shrink the struct size and remove those unused members.
Change-Id: I02136e3aa91e58b2afc923c09c8693095497fdd7
When displaying the PDP context, it is quite useful to also show IP
address and TEI information about the GTP side of that PDP context.
Change-Id: I56ea530240c15b26729e7a42e539020cb1e233e5
cosmetic ws in common_cs_vty.c, osmo_msc.c
comment: tiny typo fix in gsm_04_08.c
In comments, drop some unbalanced braces, because simplistic C file harvesters
will break at a single opening brace even if it is in a comment. This is aimed
at the fsm-to-dot.py script in libosmocore/contrib.
Change-Id: I3c1fa53195a1e57d6fe0a6791c346d30ceff1251
When the creation of a new compression entity fails, an error
message is created, this error message contains printf with
a dereferentiation of the compression entity, that is clearly
NULL at that point. This commit corrects that.
Change-Id: I87371ade0ccd6a93b446f2013c1747f486739518
Use CTRL_CMD_DEFINE_RO(), CTRL_CMD_DEFINE_WO() and
CTRL_CMD_DEFINE_WO_NOVRF() where appropriate to get rid of boilerplate
code.
Change-Id: I5bcea0b4f4b8f535bef2b423f2013b8b4a218b5b
osmo-bts consumes the gsm_data_shared.{h,c} files and assumes the
OpenBSC directory layout. Install the files into the specific
sub-directories to make the --with-openbsc=dir option work.
Change-Id: I3da21402dee3d6f1d812b232b0a3f13b8a462d5b
* Explicitly check when ARFCN array split is impossible and return
gracefully instead of using negative index.
* Separate range encoding into generic function and use it for all
SI-related things.
* Propagate the error into that function and to its callers.
* Add separate test-case for the segfault previously triggered by this bug.
Change-Id: I3e049ab2d7c1c4d6c791b148f37e10636a8e43e0
Related: RT#7379
Previously reading from socket would block if no data were sent by
the server. Use non-blocking read for set and get operations.
Change-Id: I706d54a4a7ceef62683bf9a2fe63fc9ab331c24e
* clearly separate report parts
* use textual representation for failure cause if possible
Change-Id: I7a98a77011463021d0edd6ecfab1680e211f7e16
Related: OS#1615
Use osmo_strlcpy() to fix unsafe invocation of strncpy(), which potentially
left the result unterminated.
Change-Id: I1a119b1760a3e3262538b4b012d476fdce505482
Re-apply the reverted commit 98bc7fa50d, this
time with a clear error message in case autoconf-archive is not installed.
Change-Id: I631bde22e79ec0318eb9c8114db5861a1d635816
Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de>
Add openbsc-dev with source and header files necessary for osmo-bts builds.
Max's note: extracted from Debian packaging work into separate commit.
Change-Id: I25f8c639d2dc525ca280a7cd09de3ca6358d2568
The code checked 'if (strcpy(..) != 0)' which is always true and thus always
copied twice -- luckily we want to copy anyway and so this is not an actual
functional failure.
We could correct to strcmp, but instead of iterating to compare, we might as
well copy right away.
Change-Id: I0ea035bd478f7022ed65e9e84d8aaf5e423309b7
This introduces a failure with ./configure on my machine:
../configure: line 6612: syntax error near unexpected token `-Werror=implicit,'
../configure: line 6612: `AX_CHECK_COMPILE_FLAG(-Werror=implicit, CFLAGS="$CFLAGS -Werror=implicit")'
Makefile:420: recipe for target 'config.status' failed
make[1]: *** [config.status] Error 2
Installing autoconf-archive did not fix the error.
So even though jenkins seems to accept this, I cannot build with this patch.
Let's find out how to do this in a way that all systems can still build
and then re-apply this patch.
This reverts commit fd161ccce8.
Change-Id: I2b368500b07f233882ef854eca1fa21f6df39e29
Make warnings (when available) related to common memory-related issues
into errors to harden the source and decrease chance of errors.
Change-Id: Ied9c950dafa65f324cf31298b13b590f56139700
* add missing spaces after comma and minus
* prevent useless recursion calls
* mark static functions as such
* name and explicitly use enum for ARFCN range
Change-Id: If5b717445c8b24668bad0e78fd5bb51f66c4d18e
Call vty_init() before handle_options() to make sure the host.app_info is
populated before --version potentially tries to print it.
The segfault was introduced by 2c05f75bbf in a
recent MSC-split merge.
Change-Id: Ice91256d72b9eabd52709352ba6cc6a42af2921b
The term "phone" is incorrect. Rename phone to "MS" (mobile station)
in the comments and log output of gprs_llc.c
Change-Id: I322d3d99452502da7555cc2af6bc8a192ca3c9c5
In some rare cases the modem might send a xid indication that does
not contain anything except the version number field. The sgsn
ignors such SNDCP-XID indications by stripping the entire field
from the response. We found a modem in the wild that started to
act problematic when the empty SNDCP-XID was missing in the
response. This patch changes the XID negotiation behaviour in
a way that if a modem should send empty SNDCP-XID indications,
the reply will also contain an empty SNDCP-XID indication. Apart
from that the SNDCP-XID version number is now parsed and echoed
in the response. This ensures that we always reply with the version
number that the modem expects. (The version was 0 in all cases we
observed so far)
Change-Id: I097a770cb4907418f53e620a051ebb8cd110c5f2
Related: OS#1794
libosmocore change-id I857af45ae602bb9a647ba26cf8b0d1b23403b54c adds
OSMO_VALUE_STRING to compose value_string arrays with the exact enum names as
entries. Use instead of identical local macros in two places.
Change-Id: I1b44d2a3f293785a01d6a587c78f9e0cbeec70c3
gsup_test_client was added in 4f8e34b226 and
moved to libcommon in 2c1f8c8ceb, both of
which forgot to adjust the .gitignore.
Change-Id: Idd0d29a2f5c5b9b038103c955e0027d9ee9fee73
debian/control:
* restructure to make it easier to incorporate further changes
* update package descriptions
* update project URL
debian/rules:
* use proper hardening syntax
* restructure to make it easier to incorporate further changes
* remove useless comment
debian/compat: update compatibility version
debian/coryright: update to match Debian format
Change-Id: I49cc9239b15dc77d782914ca2547e601d049acdc
Related: OS#1694
* log xid type as string instead of int
* log packet encryption status, algorithm and IOV-UI in debug mode
* print encryption parameters when dumping llme via vty
* log key propagation from MM to LLC
Related: OS#1794
Change-Id: I30c38fdeb0b88bb39bdb9928851300bc79e6aec6
This option only served to demonstrate possibility of manually selecting
<id> field in CTRL protocol. Since the transition to generic ipa module
this is no longer exposed so the option became a no-op. Correspondingly
there's no need to explicitly initialize the RNG - the Ctrl class
handles random <id> generation internally.
Change-Id: I10cc7c069354cced2bba84fe67c69c28b8596ded
When passing a NULL config to osmo_oap_client_init(), set OAP to disabled
state. Along with the previous fix that ensures message rejection in the
disabled state, this makes use of OAP in the GSUP client optional.
oap_client_test: expect null config to set state to disabled.
Related: OS#1592
Change-Id: Ie4d622fcfd24cb7d89d19f93e4b2571d8fadd1a3
Fixes the bug indicated in oap_client_test.c: adjust to actually expect the
proper behavior.
Also adjust for modified return value for message rejection. Instead of -1,
just expect < 0.
Adjust experr for new error messages.
Related: OS#1592
Change-Id: I16165d228653e8a2689f9df94b77b470c06480c6
There is a hole in OAP where a disabled OAP still accepts at least a
Registration Reject message, after which it will do things it shouldn't. Show
this by expecting the bugs, to be adjusted with the upcoming fix.
Related: OS#1592
Change-Id: I4a5fde308b876946fea2571ea1a550f0cc7ee136
Use libosmocore's DLOAP logging category for OAP.
oap_client_test.c: make sure DLOAP is in DEBUG level to not lose any logging
messages from experr.
Todo: we're using a "Library" logging category, which is not really what the
library category was intended for. Instead, the OAP client should probably be
given a logging category like DVLR or DGPRS in its initialization API.
Related: OS#1592
Change-Id: Ic765c19381b0d983da90a5d8aee9cd17e31cf34a
Mainly to differentiate the OAP messaging API (osmo_oap_ in libosmocore) from
the OAP client.
This is in preparation for moving the oap client to libcommon, which is in turn
preparation for libvlr. Add the osmo_ prefix, as all public Osmocom API should
have. We also have OAP messages code in libosmocore, so clarify by naming this
osmo_oap_client, and by also renaming the oap_test to oap_client_test. This
reshuffling will allow an easy move of OAP to libosmocore if we should want to
do that. A number of patches will follow up on this.
Related: OS#1592
Change-Id: Id447d2bebc026a375567654adafa5f82439ea7e1
This corresponds to change-id If5099e60681a215e798b6675f21813f26769c253 in
libosmocore, which is now required to build openbsc.
Related: OS#1592
Change-Id: I2f06aaa6eb54eafa860cfed8e72e41d82ff1c4cf
Use the DLGSUP logging category for GSUP.
Bump the required version of libosmocore to 0.9.5 to benefit from the DLGSUP
logging category fix in core/logging.[hc].
(Id974c7be158e4d60421a98110f5c807aefd31119)
Todo: we're using a "Library" logging category, which is not really what the
library category was intended for. Instead, the GSUP client should probably be
given a logging category like DVLR or DGPRS in its initialization API.
Related: OS#1592
Change-Id: Id3938267fa062e1a997d3704cd678874306f86ee
This is in preparation for moving gsup to libcommon, which is in turn
preparation for libvlr.
Related: OS#1592
Change-Id: I9c95d00f1a9420887a44c938b1d0ee3e20586f4c
Make sure everything is named gsup_client_ / GSUP_CLIENT_.
Rename static gsup_client_send() to client_send() to avoid clash with public
gprs_gsup_client_send() being renamed to gsup_client_send().
This is in preparation for moving gsup to libcommon, which is in turn
preparation for libvlr. libvlr and osmo-sgsn will use the same GSUP client
code. A number of patches will follow up on this, also for the the OAP client.
Related: OS#1592
Change-Id: I57433973b1c4f6cc1e12e7b1c96b5f719f418b51
GSUP was added to libosmocore in 0.9.4. We're using it here, so make up for a
previously missing bump.
(BTW: I'm pretty sure that other dependencies are also in dire need of a bump,
but leaving that for another patch)
Change-Id: I4f245a7d78d0889b37084c52478372bddb8289d6
* replace some tabs indent with spaces
* add comment to make sure no new tabs are used for indentation by emacs
* remove unnecessary parenthesis
Change-Id: Ib79fd4317d40ee4fd87b090b9faf8ebaf4bfca64
Replace hackish ipa_send_* routines with proper implementation from IPA
module thus making it part of extended tests.
Change-Id: If13ed7fd243ce3aeef505d2e8468e221aa62f79e
This reverts commit 1611df5226.
This is due to a segfault introduced to the asan build only. See:
http://lists.osmocom.org/pipermail/openbsc/2016-December/009966.html
Subject: new sanitizer breakage: SIGSEGV in sgsn_create_pdp_ctx()
Date: Tue Dec 13 12:08:32 UTC 2016
Change-Id: Ic926c0e6778947b516994822e3a21d4fde25bb02
Enable Deactivate PDP context based on the IMSI of the subscriber.
When there are PDP contexts present for a MM context,
PDP context will be deactivated along with GMM Detach(MM context deletion).
If there are no PDP present, MM context will be deleted to avoid
further PDP context request from the MS.
Test cases is added to check this functionality.
Change-Id: Ia0a41aa2218ec2fda4ea17a37c8cc55cba63dd13
GSM48_CMODE_DATA_6k0 was not properly terminated and thus resulted in a
bug.
Change-Id: I4000f06d0b49c4afb0446beddd150521c4ba3cf0
Fixes: Coverity CID 148207
For TCH/F_PDCH in PDCH mode, directly return the lchan to use, in order to
switch it to TCH/F. To check the pchan type in chan_alloc.c, make ts_pchan()
public in gsm_data_shared.h.
Commit c3f72f63af broke TCH/F_PDCH, as a fallout
of setting the GSM_PCHAN_PDCH subslots number to 0. This is sane and correct,
but the chan_alloc code failed to see a ts as available if it has no subslots.
Explanation:
_lc_find_trx() checks each timeslot. For normal, static TCH timeslots we
determine the number of logical subslots contained and check whether one of
them is free. For dynamic TS, we can do the same when in TCH mode, but when in
PDCH mode, we already know that it is available for immediate switchover for
voice and hence can return it right away. TCH/F_TCH/H_PDCH already has a
special check for that. TCH/F_PDCH doesn't, but this worked for TCH/F_PDCH as
long as ts_subslots() returned 1 for PDCH: the for-loop at the bottom of
_lc_find_trx() checked one subslot, which succeeded on an lchan in PDCH mode,
since PDCH lchans are always marked type == NONE and state == NONE. Now we more
accurately acknowledge that a PDCH timeslot has zero subslots and that a
dynamic timeslot in PDCH mode can always be switched to voice immediately,
without checking lchan type or state.
So, above mentioned commit set PDCH to zero subslots, and the for-loop to check
the (zero) subslots never ran and hence never returned the lchan. This fix adds
a special condition for TCH/F_PDCH in PDCH mode, same as TCH/F_TCH/H_PDCH.
(Todo: ts_pchan() can probably be used in other places as well to remove some
code dup. Leaving that for another patch.)
Fixes: OS#1868
Change-Id: I5d555d018a5bcb8d948e54059d32ec4c9b3070d0
Preparing cosmetically for a subsequent commit which will add another pchan
kind to be checked, rather use a "switch (pchan) {}". Also reverse one if()
branch to "early-exit" style.
Change-Id: Ie5eb0fa859c4f225616095dc56d52ce0f2dc8bdc
This is useful particularly in case where we deactivate PDCHs
which don't have a SACCH associated. The existin code would
always attempt to deactivate a SACCH even in those cases, leading
to the BTS responsding with related error messages.
Change-Id: Iaf46782329b38ba8f3d438e6c75c2d467b852734
When the LLC-XID request is constructed the order of the elements
in the TLV structure is reversed. This is in theory not a problem,
but differs from what we know from our practical experience. This
commit fixes the problem.
Change-Id: I1d71c947350d3c5a85ff36b71c1b8f036071d162
This is intended to prepare for splitting gsm_subscriber_connection into BSC
and MSC specific structs, to make the splitting patch more readable.
Change-Id: Ib9666225fb9bfec2cf1e364343560571869fe6a7
Rename current subscr_con_allocate() and subscr_con_free to bsc_*,
and add two separate msc_subscr_con_allocate() and _free().
The msc_subscr_con_free() ignores all lchan members.
In libbsc use bsc_*, in libmsc use msc_*.
Change-Id: I3cf7c7cafdf4672ec7b26058bba8a77159855257
Future: there will be distinct subscr conns for libbsc and libmsc.
Leave the timezone VTY output in libbsc's config_write_net(), until the BSC/MSC
separation of struct gsm_network is completed.
Change-Id: I9712b2e07b4f1ab8d2e4ad40a8d771e98ed25b20
Time zone used to be configurable per-BTS. In the upcoming MSC-split, no BTS
structures will be available on the MSC level. To simplify, drop the ability to
manage several time zones in a core network and place the time zone config on
the network VTY level, i.e. in gsm_network. If we are going to re-add fine
grained time zone settings, it should probably be tied to the LAC.
Adjust time zone VTY config code (to be moved to libcommon-cs in subsequent commit).
Adjust time zone Ctrl Interface code.
Change-Id: I69848887d92990f3d6f969be80f6ef91f6bdbbe8
Implement connection_for_subscr() from a completely different angle: instead of
looking up lchans in bts structs, look up the subscriber in the global list of
gsm_subscriber_connection. static lchan_find() is thus obsoleted.
All callers of connection_for_subscr() live in libmsc, so move to libmsc.
The move and edit are done in a single commit since the old and new
implementation have nothing in common.
Future: osmo-cscn will use this, without bts being present.
Remove implementation of connection_for_subscr() from channel_test.c -- it is
possible that the abort() in there was intended for a regression test, but
actually it seems the implementation was merely added for linking reasons, and
the abort() added to guard against the NULL return value: no comment nor the
commit log indicate that the abort() is test critical; the addition was the
only change in channel_test.c for that commit; at the same time a
connection_for_subscr() call was added in libmsc.
Change-Id: I5e0ba0ecf1726ebd540800f4e98fdfc937c904ff
Keep only BSC specific bits of the 'network' VTY node in bsc_vty.c, move more
general VTY commands to common_cs_vty.c.
Add arg to common_cs_vty_init() to pass a config_write_net() function. Pass a libbsc
specific config_write_net() function.
Future: upcoming omso-cscn will re-use the VTY bits moved to libcommon-cs and pass a
different config_write_net() function.
Change-Id: I871b7b32a0c56fdce983e409cf244ec487d24e71
Move gsmnet_from_vty() and the bsc_gsmnet global to common_cs_vty.c.
Rename bsc_gsmnet to vty_global_gsm_network and make it static to common_cs_vty.c, to
clearly mark the global variable for VTY use only.
Introduce common_cs_vty_init() to set vty_global_gsm_network.
Change-Id: I26c5c47de08f899b896813d09612d5cb2f8e42d6
Now that bsc_network_alloc() is separate, move it to before the VTY init (a
subsequent patch will pass the gsm_network instance as a parameter to
vty_init()).
bsc_hack.c: drop the comment that says about the VTY init: "This needs to
precede handle_options()" -- it is not accurate. Actually move the
handle_options() above both vty_init() and the bsc_network_alloc() calls, to be
able to decide which mncc callback to pass to bsc_network_alloc. It would make
sense to set this later on, but that would require further refactoring of the
bsc_network_init() and gsm_network_init() signatures, so not in this patch.
Change-Id: Ie6a7037e703b5a2d08ceeb20d35f197aaddc9d1b
For patch clarity, keep some code dup to be removed in a subsequent patch. In
the same sense don't change the fact that mncc_sock_init()'s return value is
ignored.
The global gsm_network instance 'bsc_gsmnet' is basically only used by the VTY,
and a future patch will "hide" that global in a vty .c file. In a nutshell, I
want to
- first allocate a gsm_network,
- then initialize the VTY passing the gsm_network pointer,
- and then read the config file using the initialized VTY.
So far, bsc_bootstrap_network() allocates the gsm_network and reads the config
file right away, which only works by sharing the extern bsc_gsmnet pointer,
which I would like to uncouple.
Change-Id: I480a09a31a79766ad07b627dd5238b7e37f3be7a
libbsc and libmsc will have separate subscriber connection structs. Hence don't
rely on gsm_subscriber_connection, but work on a direct pointer to the counter
for the next RP reference.
The only very thin function in gsm_04_11_helper.c thus becomes obsolete: drop
the entire file.
Change-Id: I2a2e9ba6a981a385d1f8f07acbe03536ffed0072
Factor out encryption info from struct gsm_lchan as struct gsm_encr, placed in
common_cs.h.
Change-Id: I94015fb9dd511c37c1e3058a0963c780b3f700ac
Future: this will be used by libmsc's subscriber connection, for osmo-cscn.
Both libmsc and libbsc will need distinct gsm0480_send_ussdNotify() and
gsm0480_send_releaseComplete() functions, since there will be distinct
subscriber connection structs.
Rename to msc_send_ussd_notify() and msc_send_ussd_release_complete(), and add
the same in libbsc with bsc_ prefix in new file gsm_04_80_utils.c.
In preparation of this patch, the message generation part of these functions
has been added to libosmocore as gsm0480_create_ussd_notify() and
gsm0480_create_ussd_release_complete(). Use these.
Adjust all libmsc and libbsc callers according to use the msc_* or bsc_*
implementation, respectively.
Change-Id: I33a84e3c28576ced91d2ea24103123431f551173
For new MM contexts, the ra_id was correctly obtained from the ue_ctx, but in
case an MM ctx is re-used and the ra_id changed, the new ra_id was not copied
to the MM context; instead, the ra_id was overwritten with uninitialized data.
Always initialize the local ra_id variable from the ue_ctx->ra_id for Iu
connections; it is used further below to update the ctx->ra_id.
For the case of a brand new Iu MM ctx, the ctx->ra_id then gets initialized a
second time. We could technically drop the init in sgsn_mm_ctx_alloc_iu(), but
it doesn't hurt either way.
Fixes: CID#57936
Change-Id: Ia06458758362e76925690b1757d8ced95e9609e4
Coverity scan detects a Null pointer deref (FORWARD_NULL) in
gprs_sndcp_comp.c: 67 in gprs_sndcp_comp_create().
The reason for this is that gprs_sndcp_dcomp_init() and also
gprs_sndcp_pcomp_init() rely on the comp_entity->algo algo
flag. If the program logic is correct a null pointer deref
should never occur.
This commit adds OSMO_ASSERT() statements to ensure a null
pointer deref is catched if if the ...comp_init() functions
are used with incorrect parameters.
Change-Id: I7748f06d1739a697edad5100a031e5aa1ef11ed1
Used by libbsc, libmsc as well as osmo-bsc and osmo-bsc_nat.
Moving gsm48_create* to libcommon-cs affects linking of osmo-bsc_nat, resulting in
undefined references to gsm48_extract_mi() and gsm48_paging_extract_mi(); fix
that by placing libfilter.a left of libbsc.a upon linker invocation.
Change-Id: I212c2567b56191022b683674c1c4daf842839946
Reincarnate gsm_network_init() as the parts not specific to libbsc.
Move from bsc_network_init() those bits that are not BSC specific (and useful
for upcoming osmo-cscn).
Add libcommon-cs to all linkages that use gsm_network_init().
Note: the only requirement to allow linking gsm_network_init() without libbsc
is to keep the call to gsm_net_update_ctype() out of libcommon-cs. The other items
are kept out of libcommon-cs because it makes sense semantically. But the separation
is not strong in that the BSC specific data members are of course still
omnipresent in struct gsm_network. If bsc_network_init() is not called, these
are not initialized properly -- for now no users of uninitialized members
exist.
So this is just a first step towards a sensible split of the BSC and MSC
gsm_network structs. The long term aim should be to have entirely separate
structs with some common general items.
Change-Id: If06316b97002390dc9a434686750cb96193ea63b
bsc_network_init() is more fit to live in a BSC specific header, move it to new
common_bsc.h. It will probably also absorb the BSC-specific part of gsm_network
in the future.
Adjust header includes across the board. Particularly, fix abis_nm.h by
explicitly including gsm_data.h: it so far relied on other headers to do that,
which now is no longer always given.
Change-Id: I9edfb1e748bb1cb484fadd48b0406f5b3098e89b
The gsm_network_init() function initializes a whole lot of BSC specific stuff.
Aiming to move some of it to libcommon-cs, first rename it to bsc_network_init().
This will retain the BSC specific stuff when the move is done.
Adjust all callers.
Future: osmo-cscn will call the more generic part and not the BSC specific
part.
Change-Id: I4816ae19374390fc5c64972f7cad2e9ec3d8bcc3
Put mncc_recv_cb_t in common_cs.h to avoid header include complications: if placing
right above struct gsm_network, one must include gsm_data.h to use
mncc_recv_cb_t as function parameter in a header, which will include
gsm_data_shared.h, which will include common_cs.h (future knowledge). Since I will
need to use mncc_recv_cb_t in common_cs.h, including gsm_data.h from there would
introduce an #include loop. Avoid that and define mncc_recv_cb_t in common_cs.h to
begin with.
Change-Id: I2e64cffa563750ce9f3172ffba6f9cf5b9280e9c
Timer T3395 starts at the transmission of Deactivate PDP request using
pdpctx_timer_start but there was no corresponding stop function.
The timer is stopped when Deactivate PDP Context Accept is received.
This according to 3gpp spec reference 24.008 section 6.1.3.4.2.
Change-Id: I825c0a47d39e784dd1b8251f564609262530a5c6
This is a speculative change for interrogateSS and by not answering
the request the radio connection would remain open long.
The SS/USSD code is from a time where none of knew much about GSM. We
do not support SS but should reject it. We have checked for an empty
string in the text field to guess if it is a result/release to not send
more information. The right way forward is to decode the ASN1 into the
fields REQUEST/RESULT(last).
Fix an issue and make the code worse. Assume ss_code > 0 to see if this
is a interrogate invoke. The issue is that code 0 is a well defined
value but unlikely to be used.
MAP ASN1 definition:
SS-Code ::= OCTET STRING (SIZE (1))
-- This type is used to represent the code identifying a single
-- supplementary service, a group of supplementary services, or
-- all supplementary services. The services and abbreviations
-- used are defined in TS 3GPP TS 22.004 [5]. The internal structure is
-- defined as follows:
--
-- bits 87654321: group (bits 8765), and specific service
-- (bits 4321)
allSS SS-Code ::= '00000000'B
Change-Id: Ib0dc4485388f030eb172fe21f5327b7ab94751f5
When OM2000 has confirmed that a TS is started, call dyn_ts_init()
on the timeslot to start the processing for fully dynamic (osmocom
style) TCH/F_TCH/H_PDCH. This should in turn trigger the activation of
idle timeslots as PDCH until we want to allocate any of them for TCH/F
or TCH/H.
Change-Id: I1a1fd61d6afd85449cacad4bacfb830252dab6b1
Ericsson has introduced a propritary format to issue the S13 BCCH
information. Normally the system info type field for SI13 would
be encoded as 0x28. Ericsson encodes that field as 0x02 and ads
a bcch mapping parameter, (IEI=F2) This patch sets the BCCH mapping
to 0x00 (=BCCH Normal) statically (0xF200)
The new constands are added to libosmocore, see commit:
f0f9c8c29daaefbf9cff19177ade4a13ffb2e36c
Change-Id: Ie0900f9b810744172b3090ce1b0ef7b7a1132946
function bts_model_rbs2k_start() in bts_ericsson_rbs2000.c lacks
the feature definition for GPRS and EGPRS.
Change-Id: I777a67862084aa6cca39cfc43f5708e47608b0e6
This test is to trigger the use-after free issue in commit bff7b0d80972. If
compiled with address-sanitizer the test will abort without the fix.
Change-Id: I5e8c6626ba43342740f08d699383bdded739079f
Ticket: OW#3049
Sponsored-by: On-Waves ehf
In case the link_info is deleted we have to stop handling the stored messages
inside link_info. Not doing so can lead to invalid memory being accessed.
Change-Id: Ieb8503e9e94e7a5ac450ad8aa1713ec4f21cdea5
Ticket: OW#3049
Sponsored-by: On-Waves ehf
it seesm more recent RBS2000 models have much larger CCP and CI value ranges
than those of older models.
Change-Id: Ib116c1fac901b293929fce34223d1fd0af15d2bc
The code for supporting the configuration of the OM2000 CON (LAPD
Concentrator) MO was so far incomplete and not used from the OM2000 FSM
initialization. This patch adds
* VTY commands for configuration of CON Groups and Paths
* The FSM integration to actually configure the CON MO
Change-Id: I56dc1b5e35adef3a2078bcf9536537eb0f454192
This happens e.g. with DAHDI driver, when the DAHDI device cannot be
opened. Let's not prematurely seg-fault early in the RBS2000 signal
handler, but take the proper error handlign for this.
Change-Id: I9223fb1568d3db7e278f07240c4be334c6602a13
talloc_ctx.c: In function ‘talloc_ctx_init’:
talloc_ctx.c:40:2: warning: implicit declaration of function ‘msgb_talloc_ctx_init’ [-Wimplicit-function-declaration]
msgb_talloc_ctx_init(ctx_root, 0);
^~~~~~~~~~~~~~~~~~~~
Change-Id: Ib8ebc02d5cf0d2b4019473d3750ae7c6f8a32896
For TCH/F_PDCH, return an invalid chan comb (0) and print an error message
that hints at the proper pchan type to use instead: TCH/F_TCH/H_PDCH
Change-Id: Ibe0f944573f0a6d1be4bf7cf4986c4b2b3bd6d0d
When OM2K sets up the timeslots with the BTS, the dynamic channel state
is not yet resolved to any particular pchan type. Instead of using the
dyn state, always advertise dynamic timeslots as pchan2comb(TCH/F).
In the past, the Ericsson dynamic timeslots were handled as pchan type
TCH/F_PDCH. This is a mistake, as this pchan type is intended for
the ip.access dynamic PDCH way of dynamic channels. In any case, in the
initial state of this pchan type, the timeslot was initialized as
pchan2comb(TCH/F) because the ts->flags do not reflect an active PDCH
yet. In short, this patch does not change the behavior of TCH/F_PDCH
timeslots, only clarifies it.
It would in fact make sense to disallow use of TCH/F_PDCH for OM2K,
but that should probably be a separate patch.
The proper pchan to use for Ericsson dynamic timeslots is
TCH/F_TCH/H_PDCH. These do not use ts->flags, but ts->dyn.* as state,
which first reflects pchan_want == pchan_is == GSM_PCHAN_NONE. Hence
the timeslot was initialized by OM2K as pchan type zero, which is
unknown / invalid. So, instead of using pchan_is, which is not yet
reflecting anything meaningful, always initialize as TCH/F chan comb,
as Ericsson hardware apparently expects it.
Change-Id: If0693f7c5c85977b0e4acbc701ee5d635434d0d1
talloc_free the cfg only after asserting num_bsc count sanity.
This caused a failure in the 'bsc-nat' test with -fsanitize build.
Should fix the Osmocom_Sanitizer build on jenkins.osmocom.org
https://jenkins.osmocom.org/jenkins/job/Osmocom_Sanitizer/
Change-Id: Ic20aacaccffcaa58ccec6d24c884727dc1bc50e6
Throw warning message in case the MO state does not change
to enabled after sendeing an Enable-Request message.
Change-Id: Idfde8d6f71526e8acfea51835732515a4bee858e
This patch adds support for ericssons sambm negotiation.
This patch depends on libosmo-abis commit:
2788c7eacab91cd39d68e316fc8ee87763bbfeb4
Change-Id: I56b1c1cef07a61143fc0e8058480805cddfeff96
This patch adds parsing for OM2000 MO fault report map parsing,
the bits in the fault maps are counted out and displayed.
Change-Id: I6e2928f39b09bc08e9ab78bc10bc81e07f7eb55d
Contrary to standard A-bis, in the RBS2000 case the BSC connects
the signalling data links (LAPD) to the BTS. In case one of them
drop, we need to attempt to re-establish them.
This requires libosmo-abis with Change-Id I07f0f79e0cda09766f357032ffb4e7ad643d448a
Change-Id: I710b5af5d0acbdd3febd314849340f2adb7abd80
In case of the sysmoBTS and receiving a channel activation ack on a channel
that was marked as broken, release it again.
Use a normal release without SACCH deactivation and release the rqd_ta data.
Also add a local variable 'ts' to shorten some lines.
The typical situation where this would occur is with high latency between BTS
and BSC (or NITB). If a channel activation ack does not arrive in time, a
channel is marked broken, and never recovers after that. This patch will
release the channel again, which will remove the BROKEN_UNUSABLE state and
makes lchan available again. Reported by Rhizomatica.
However, in case of packet loss, i.e. when the channel activation ack never
arrives at the BSC, this patch does not provide a resolution of the
BROKEN_UNUSABLE state.
On dynamic timeslots: clearing the dyn ts state could possibly happen in
lchan_free() instead of in rsl_rx_chan_act_ack(). That's to be done in a
separate patch, if at all.
Tweaked-By: nhofmeyr
Change-Id: I63dc0deaf15ba7c21e20b1e0c7b85f0437e183ed
The GTP protocol specification requires us to include the MSISDN IE in
all non-secondary PDP context activations. However, when no real HLR is
used (e.g. via GSUP), we do not have the MSISDN information available
and so far simply sent a zero-length MSISDN IE in GTP. The latter is a
violation of the spec.
So to resolve this, we now send a 15-digit all-zero dummy MSISDN IE, as
described in TS 23.003.
Change-Id: I8d0a5d52d6cd2a00b5dda060bd41d45056dfa84d
When receiving the 'Start Result' message, for CF and TRXC MO
we directly transition to performing the Operational Info. In that
case, we need to return after sending the Operational Info and skip
the usual processing for the default case below.
Change-Id: I99860d198b337ffe461b240bda20dc10e1b5b2cb
Our existing OM2000 code for initializing all Managed Objects of a BTS
at startup was never complete. Rather than trying to fix the old-style
code, introudce a hierarchy of osmo_fsm's reflecting the full protocol
hand-shake and sequence of bringing up the individual MO's.
If this works out well, it mihgt make sense to convert the TS 12.21 OML
code for other BTS models, too.
Change-Id: I3e11b28ba22b8c227e0401e6207fdda5381dda8c
Extend both 'show lchan <bts> <trx> <lchan>' and 'show lchan summary' to
include information on dynamic timeslots.
Have one common function that prints " as foo" or " switching foo -> bar" to
the vty, use it in lchan_dump_full_vty() and lchan_dump_short_vty().
In lchan_dump_short_vty(), split the vty_out call in two in order to interleave
the dyn ts info right after the pchan.
The summary hence looks e.g. like this for osmocom style dyn ts:
BTS 0, TRX 0, Timeslot 5 TCH/F_TCH/H_PDCH as PDCH, Lchan 0, Type NONE, State ACTIVE - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
or
BTS 0, TRX 0, Timeslot 4 TCH/F_TCH/H_PDCH switching NONE -> PDCH, Lchan 0, Type NONE, State BROKEN UNUSABLE - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
Change-Id: I3eb72ac7f0a520a8eefe171b9fb357f149aa3fda
count_codecs() is called on every chan act ack, also for channels other than
TCH/F and TCH/H. So this logging happens a lot during normal operation but adds
no real information.
Also, RSL would be the wrong logging category for this -- RSL is about the RSL
communications, not whether our internal code tries to count lchan codecs for
the wrong channel types.
Change-Id: Ibdac3bbe48745fe6a1c31d6f87369c9066c0374a
As per TS 23.014, a GSM MSC must implement mobile-originated DTMF
generation. We gate the DTMF signalling messages to MNCC, and expect
the external MNCC handler to deal with it. However, the internal MNCC
handler simply ignored such singalling messages, rather than rejecting
DTMF altogether.
It turns out failure to respond to START DTMF will cause some phones to
behave in interesting ways, particularly with modem
firmware v6.01.00, see https://osmocom.org/issues/1817). In this case
the phone is not able to release the call as the pending response to the
START DTMF is probably keping a reference or lock of some sort.
Change-Id: I336f0cd0a6396b522d228479a417fd4d606157ac
GSM 04.18, which is the successor of GSM 04.08, describes
additional RR 3g specific message types. This commit adds
log output for those messages. The behaviour is not changed
all affected message types are still forwared to the MSC
as they were before.
See also 3GPP TS 04.18, section 10.4, table 10.4.1
The change requires to update libosmocore as well, see
also commit f48fdb3a108da0dc23d7af4ac021e98e11f07152 in
libosmocore.git for details.
Change-Id: I41f2242fdf59c3eb4b3f8f7f003c17f7e0df01aa
the OML attribute tables are hardcoded. To set variable parameters,
the hardcoded data structure (tlv) is patched on byte level during
runtime. This patch replaces this mechanism.
- Replace hardcoded OML attribute tables with dynamically
generated TLV structures.
- Add unit tests to check if the OML attribute tables are
generated correctly
- Put OML attribute table generator code in a separate file:
bts_ipaccess_nanobts_omlattr.c
Change-Id: Ibeb34a84912d6cf695f553a34c69320fca7d08fa
Use channel type name instead of number and log it with DEBUG facility
otherwise it produces lots of irrelevant messages for SDCCH*
Change-Id: I11b04e0cb02bf6ed01f6076cb31a56d8921d735e
- missing break in gprs_sndcp_pcomp.c, line 143
- string overflow in slhc_test.c, line 211
- sizeof mismatch in gprs_sndcp_xid.c, line 1369 and 1378
- mismatching signedness in gprs_sndcp_xid.c, line 1377
- needless < 0 comparison in gprs_sndcp_xid.c, line 477
- needless < 0 comparison in gprs_sndcp_xid.c, line 209
- missing returncode check in v42bis_test.c, line 320
- wrong pointer dereferentialization in gprs_sndcp_comp.c, line 73
Change-Id: I4f9adf251f5119e67ffe76baad6f1f996ac8dbad
When DL DTX is active and silent period is in progress dtx.cache is
populated by SID UPDATE message which about to be scheduled next. If at
that moment FACCH message arrives (which have higher priority) we have
to send ONSET message to L1 but we can't invalidate cache with SID
UPDATE as it will be used for SID FIRST message to resume silent period
after FACCH transmission is over (provided there were no incoming voice
in between). Hence the necessity for separate buffer to store content of
FACCH message while we're sending ONSET to L1 while keeping SID UPDATE
cached.
Change-Id: I316e81af893b24766bf259baaed7a0be75a11694
Related: OS#1801
We count the codec when the channel was successful setted up
Using sign_link->trx->bts instead of msg->trx to get the bts.
Add OSMO_ASSERT for bts within count_codecs()
Change-Id: Ib49c7c337980a7d6f189d7a0551ca2e4c3822f45
Value 4 used as magic number by both OpenBSC and OsmoBTS so it make
sense to add it to shared header. See
ebb483b69a5319e522ba5f713e9cb6f68a814a6a in osmo-bts for details.
Change-Id: I9c6ad68f4c6aa72d39ec7e5a6968b36ec20e79f4
Drop extern definitions of talloc_msgb_ctx and use msgb_talloc_ctx_init()
instead.
In sgsn_test.c, use a local variable msgb_ctx to do the talloc report
from the return value of msgb_talloc_ctx_init().
Change-Id: I2f9ace855f0ecbdc9adf5d75bcb1a3d666570de4
There's "channel-descrption bs-ag-blks-res" vty command which sets
BS-AG-BLKS-RES which might be too high if CCCH is combined with
SDCCHs. Previously proper value was silently enforced. Log this
situation explicitly and add spec reference to the comment.
Change-Id: I53e2b881fc28472d6709f063fb265a4e6a0fffcd
- consolidate all DTX-specific things in a separate struct
- rename struct fields to better reflect meaning
- add pointer to DL FSM for AMR
- remove unused flag
- expand buffer to hold cached payload alongside with CMR/CMI
Change-Id: Idac8609faf9b5ced818fde899ccfc6ed0c42e8fd
Just as a general precaution deemed to fit such a convenience function that
lives in libcommon, no actual failure observed.
Change-Id: I8e77fe1abc402469fd037e2fde2f46e2c8114f59
Found this by coincidence, no actual failure case was observed.
lchan_lookup() does have a return NULL code path, so we should not blindly use
its returned pointer.
Change-Id: I34ce126d36420b8194c88c0faa865294334a6658
This reverts commit 38e9ea3f7f.
Introduced a reproducable segfault, because msg->trx is not actually set/used
in the openbsc code paths.
Program received signal SIGSEGV, Segmentation fault.
count_codecs (lchan=0x1, bts=<optimized out>) at ../../../src/libbsc/abis_rsl.c:104
104 rate_ctr_inc(&bts->network->bsc_ctrs->ctr[BSC_CTR_CODEC_V1_FR]);
(gdb) bt
#0 count_codecs (lchan=0x1, bts=<optimized out>) at ../../../src/libbsc/abis_rsl.c:104
#1 0x0000000000425661 in abis_rsl_rx_dchan (msg=<optimized out>) at ../../../src/libbsc/abis_rsl.c:1516
#2 abis_rsl_rcvmsg (msg=0x8143f0) at ../../../src/libbsc/abis_rsl.c:2611
#3 0x00007ffff71420d0 in handle_ts1_read (bfd=<optimized out>) at ../../src/input/ipaccess.c:271
#4 ipaccess_fd_cb (bfd=0x815af8, what=1) at ../../src/input/ipaccess.c:386
#5 0x00007ffff7779b62 in osmo_fd_disp_fds (_eset=0x7fffffffe590, _wset=0x7fffffffe510, _rset=0x7fffffffe490) at ../../src/select.c:149
#6 osmo_select_main (polling=polling@entry=0) at ../../src/select.c:189
#7 0x0000000000406fac in main (argc=<optimized out>, argv=0x7fffffffe738) at ../../../src/osmo-nitb/bsc_hack.c:385
Add flag to explicitly track the state of DTX DL for AMR HR whe
SID_FIRST_P1 has been sent to L1 already but no next frame available
yet: this can be followed by SID_FIRST_P2 or SID_FIRST_INH depending on
arrival of voice frame within next 60 ms.
Change-Id: Id28b07b8e83cfe5e84de48a2f124084036580cd4
In addition to RTP payload SID cache got to store CMR/CMI prefix. Extend
the buffer so it can fit in.
Change-Id: Ibd4a63604a82cad3ce65f0752bffefa4b083e1b3
Fixes: Coverity CID#149508
active_calls describe all calls in active state.
call.complete Call got terminated by disconnect requested either by MS or MSC.
call.incomplete Call got terminated by any other reason.
call.active Calls reached active state.
Change-Id: I49b93af2e6a0ba16c2fb00b7b83974e8a6a16df3
Explicitly set AC_CONFIG_AUX_DIR.
To reproduce the error avoided by this patch:
rm install-sh # in case it was already generated.
touch ../install-sh # yes, outside this source tree
autoreconf -fi
This will produce an error like
...
configure.ac:16: error: required file '../ltmain.sh' not found
configure.ac:5: installing '../missing'
src/Makefile.am: installing '../depcomp'
autoreconf: automake failed with exit status: 1
See also automake (vim `which automake`) and look for 'sub locate_aux_dir'.
Change-Id: I3b6d9ad4e5af44c2bdf3844c7bf8e8517bd61d8e
Tests for V.42bis, slhc, llc-xid and sndcp-xid are built and
executed on all build configurations, but are only needed when
the sgsn (gprs) is built. This patch adds conditions check
if the tests mentioned abvove are needed or not.
Change-Id: I6921e6198ea7f99fe5276f91cbc522091853bc4e
Most of this file uses four spaces of indenting. Replace all tabs with spaces.
Remove the erratic 'set' from the recently added vim comment at the bottom.
Change-Id: I4273b3314defb1e5b31b509c2ac7d7c6cd6834cf
Add option to TextTestRunner that shows print output on stdout.
It's better to see everything in our jenkins runs and not hide test output.
Change-Id: If4be1ad1c81c9ed4ab9b208b4c6d1e4b2cc8fdd5
After libosmocore 38d232ee5d2ceb045d9ad6d3a23afcb4972523f7 which outputs
'CTRL at <ip> <port>' from ctrl_interface_setup_dynip(), there's no need to log
the CTRL bind here anymore.
Change-Id: I1a874efe365a1ecf8ec37b058215b95b9a635ec2
2016-09-30 03:12:46 +02:00
472 changed files with 2386 additions and 123621 deletions
p.add_argument('-t','--token',default='osmocom',help="Token to be used by SSE client in URL e. g. http://127.0.0.1:8888/poll/osmocom where 'osmocom' is default token value")
p.add_argument('-k','--keepalive',type=int,default=5000,help="Timeout betwwen keepalive messages, in milliseconds, defaults to 5000")
args=p.parse_args()
random.seed()
tornado.netutil.Resolver.configure('tornado.netutil.ThreadedResolver')# Use non-blocking resolver
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
