Merge branch 'master' into sysmocom/iu, with tweaks

Numerous manual adjustments are included to make sense on the sysmocom/iu branch:

* gsm_04_08_gprs.h has moved to libosmocore on the master branch, but
  sysmocom/iu has added some entries. Until it is clear whether to move the
  additions to libosmocore as well, keep gsm_04_08_gprs.h on sysmocom/iu with
  merely the additions.
* Thus, keep using the old gsm_04_08_gprs.[hc] from openbsc in the Makefiles,
  but only where the sysmocom/iu additions are needed.
* In openbsc's gsm_04_08_gprs.h,
  * include the libosmocore gsm_04_08_gprs.h,
  * use '#pragma once' instead of #ifndef and
  * add a TODO comment about moving the rest to libosmocore.

* Apply the addition of an osmo_auth_vector to gsm_auth_tuple: in the Iu auth
  vector hacks, use the gsm_auth_tuple.vec instead of a local struct.
  See iu_hack__get_hardcoded_auth_tuple() and gsm48_rx_gmm_att_req().

* In the si2q tests, pass NULL as ctx to gsm_network_init().

* In cscn_main.c, add a debug log that was originally added to osmo-nitb.

* openbsc/.gitignore: keep only one addition of 'writtenconfig'

Conflicts:
	openbsc/include/openbsc/gprs_sgsn.h
	openbsc/include/openbsc/gsm_04_08_gprs.h
	openbsc/src/gprs/gsm_04_08_gprs.c
	openbsc/src/libmsc/gsm_04_08.c
	openbsc/src/osmo-cscn/cscn_main.c
	openbsc/tests/gsm0408/Makefile.am

.gitignore

@@ -1,96 +1 @@
 debian/*.log
-*.o
-*.lo
-*.a
-.deps
-Makefile
-Makefile.in
-bscconfig.h
-bscconfig.h.in
-openbsc.pc
-src/osmo-nitb/osmo-nitb
-src/osmo-bsc_mgcp/osmo-bsc_mgcp
-src/osmo-bsc/osmo-bsc
-src/utils/meas_vis
-src/utils/meas_json
-src/utils/osmo-meas-pcap2db
-src/utils/osmo-meas-udp2db
-src/utils/smpp_mirror
-*.*~
-*.sw?
-.libs
-*.pyc
-*.gcda
-*.gcno
-*.pc
-
-#configure
-aclocal.m4
-autom4te.cache/
-config.log
-config.status
-config.guess
-config.sub
-configure
-compile
-depcomp
-install-sh
-missing
-stamp-h1
-libtool
-ltmain.sh
-m4/*.m4
-
-# git-version-gen magic
-.tarball-version
-.version
-
-
-# apps and app data
-hlr.sqlite3
-src/utils/bs11_config
-src/ipaccess/ipaccess-config
-src/ipaccess/abisip-find
-src/ipaccess/ipaccess-firmware
-src/ipaccess/ipaccess-proxy
-src/utils/isdnsync
-src/nat/bsc_nat
-src/gprs/osmo-sgsn
-src/gprs/osmo-gbproxy
-src/gprs/osmo-gtphub
-src/osmo-bsc_nat/osmo-bsc_nat
-src/libcommon/gsup_test_client
-src/osmo-msc/osmo-msc
-
-#tests
-tests/testsuite.dir
-tests/*/*_test
-# ignore compiled binaries like msc_vlr_test_foo; do not ignore
-# msc_vlr_test_foo.{c,ok,err}, but do still ignore the corresponding .o object
-# files:
-tests/msc_vlr/msc_vlr_test_*
-!tests/msc_vlr/msc_vlr_test_*.*
-tests/msc_vlr/msc_vlr_test_*.o
-
-
-tests/atconfig
-tests/atlocal
-tests/package.m4
-tests/testsuite
-tests/testsuite.log
-
-gsn_restart
-src/openbsc.cfg*
-writtenconfig/
-gtphub_restart_count
-
-# manuals
-doc/manuals/*.html
-doc/manuals/*.svg
-doc/manuals/*.pdf
-doc/manuals/*__*.png
-doc/manuals/*.check
-doc/manuals/generated/
-doc/manuals/osmomsc-usermanual.xml
-doc/manuals/common
-doc/manuals/build

.gitreview

@@ -1,3 +0,0 @@
-[gerrit]
-host=gerrit.osmocom.org
-project=osmo-mgw

.mailmap

@@ -1,12 +0,0 @@
-Harald Welte <laforge@gnumonks.org>
-Harald Welte <laforge@gnumonks.org> <laflocal@hanuman.gnumonks.org>
-Harald Welte <laforge@gnumonks.org> <laflocal@goeller.de.gnumonks.org>
-Holger Hans Peter Freyther <holger@moiji-mobile.com> <zecke@selfish.org>
-Holger Hans Peter Freyther <holger@moiji-mobile.com> <ich@tamarin.(none)>
-Holger Hans Peter Freyther <holgre@moiji-mobile.com> <holger@freyther.de>
-Andreas Eversberg <jolly@eversberg.eu>
-Andreas Eversberg <jolly@eversberg.eu> <Andreas.Eversberg@versatel.de>
-Andreas Eversberg <jolly@eversberg.eu> <root@nuedel.(none)>
-Pablo Neira Ayuso <pablo@soleta.eu> <pablo@gnumonks.org>
-Max Suraev <msuraev@sysmocom.de>
-Tom Tsou <tom.tsou@ettus.com> <tom@tsou.cc>

Makefile.am

@@ -1,35 +0,0 @@
-AUTOMAKE_OPTIONS = foreign dist-bzip2 1.6
-
-## FIXME: automake >= 1.13 or autoconf >= 2.70 provide better suited AC_CONFIG_MACRO_DIRS for configure.ac
-## remove line below when OE toolchain is updated to version which include those
-ACLOCAL_AMFLAGS = -I m4
-AM_CPPFLAGS = \
-	$(all_includes) \
-	-I$(top_srcdir)/include \
-	$(NULL)
-
-SUBDIRS = \
-	doc \
-	include \
-	src \
-	tests \
-	contrib \
-	$(NULL)
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = \
-	libosmo-mgcp-client.pc \
-	$(NULL)
-
-BUILT_SOURCES = $(top_srcdir)/.version
-EXTRA_DIST = git-version-gen osmoappdesc.py .version
-
-AM_DISTCHECK_CONFIGURE_FLAGS = \
-	--with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir)
-
-@RELMAKE@
-
-$(top_srcdir)/.version:
-	echo $(VERSION) > $@-t && mv $@-t $@
-dist-hook:
-	echo $(VERSION) > $(distdir)/.tarball-version

README

@@ -1,24 +0,0 @@
-About OsmoMGW
-=============
-
-OsmoMGW originated from the OpenBSC project, which started as a minimalistic
-all-in-one implementation of the GSM Network. In 2017, OpenBSC had reached
-maturity and diversity (including M3UA SIGTRAN and 3G support in the form of
-IuCS and IuPS interfaces) that naturally lead to a separation of the all-in-one
-approach to fully independent separate programs as in typical GSM networks.
-
-OsmoMGW was one of the parts split off from the old openbsc.git. It originated
-as a solution to merely navigate RTP streams through a NAT, but has since
-matured to a Media Gateway implementation that is capable of streaming RTP for
-2G (AoIP) and 3G (IuCS) GSM networks as well as (still not implemented at time
-of writing) transcoding between TRAU, various RTP payloads and IuUP.
-
-The OsmoMGW program exposes an MGCP interface towards clients like OsmoMSC and
-OsmoBSC, and receives and sends RTP streams as configured via MGCP.
-
-The libosmo-mgcp-client library exposes utilities used by e.g. OsmoMSC (found
-in osmo-msc.git) to instruct OsmoMGW via its MGCP service.
-
-Find OsmoMGW issue tracker and wiki online at
-https://osmocom.org/projects/osmo-mgw
-https://osmocom.org/projects/osmo-mgw/wiki

TODO-RELEASE

@@ -1,26 +0,0 @@
-# When cleaning up this file upon a release:
-#
-# - Note that the release version number is entirely unrelated to the API
-#   versions. A release version 5.2.3 may happily have an API version of 42:7:5.
-#
-# - Bump API version in src/lib*/Makefile.am files according to chapter
-#   "Library interface versions" of the libtool documentation.
-#   https://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
-#
-# - Iff the 'current' API version has changed, rename debian/lib*.install
-#
-# API version bumping for the impatient:
-# LIBVERSION=c:r:a  (current:revision_of_current:backwards_compat_age)
-# 5:2:4 means that
-# - this implements version 5 of the API;
-# - this is the 2nd (compatible) revision of API version 5;
-# - this is backwards compatible to all APIs since 4 versions ago,
-#   i.e. callers that need API versions from 1 to 5 can use this.
-#
-# Bumping API versions recipe:
-# If the library source code has changed at all since the last update, r++;
-# If any interfaces have been added, removed, or changed since the last update, c++, r=0;
-# If any interfaces have been added since the last public release, a++;
-# If any interfaces have been removed or changed since the last public release, a=0.
-#
-#library		what		description / commit summary line

configure.ac

@@ -1,214 +0,0 @@
-dnl Process this file with autoconf to produce a configure script
-AC_INIT([osmo-mgw],
-	m4_esyscmd([./git-version-gen .tarball-version]),
-	[openbsc@lists.osmocom.org])
-
-dnl *This* is the root dir, even if an install-sh exists in ../ or ../../
-AC_CONFIG_AUX_DIR([.])
-
-AM_INIT_AUTOMAKE([dist-bzip2])
-AC_CONFIG_TESTDIR(tests)
-
-dnl kernel style compile messages
-m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
-
-dnl include release helper
-RELMAKE='-include osmo-release.mk'
-AC_SUBST([RELMAKE])
-
-dnl checks for programs
-AC_PROG_MAKE_SET
-AC_PROG_CC
-AC_PROG_INSTALL
-LT_INIT
-
-dnl check for pkg-config (explained in detail in libosmocore/configure.ac)
-AC_PATH_PROG(PKG_CONFIG_INSTALLED, pkg-config, no)
-if test "x$PKG_CONFIG_INSTALLED" = "xno"; then
-        AC_MSG_WARN([You need to install pkg-config])
-fi
-PKG_PROG_PKG_CONFIG([0.20])
-
-dnl check for AX_CHECK_COMPILE_FLAG
-m4_ifdef([AX_CHECK_COMPILE_FLAG], [], [
-	AC_MSG_ERROR([Please install autoconf-archive; re-run 'autoreconf -fi' for it to take effect.])
-	])
-
-dnl checks for libraries
-AC_SEARCH_LIBS([dlopen], [dl dld], [LIBRARY_DL="$LIBS";LIBS=""])
-AC_SUBST(LIBRARY_DL)
-
-
-PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 1.0.0)
-PKG_CHECK_MODULES(LIBOSMOGSM, libosmogsm >= 1.0.0)
-PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 1.0.0)
-PKG_CHECK_MODULES(LIBOSMONETIF, libosmo-netif >= 0.4.0)
-
-AC_ARG_ENABLE(sanitize,
-	[AS_HELP_STRING(
-		[--enable-sanitize],
-		[Compile with address sanitizer enabled],
-	)],
-	[sanitize=$enableval], [sanitize="no"])
-if test x"$sanitize" = x"yes"
-then
-	CFLAGS="$CFLAGS -fsanitize=address -fsanitize=undefined"
-	CPPFLAGS="$CPPFLAGS -fsanitize=address -fsanitize=undefined"
-fi
-
-AC_ARG_ENABLE(werror,
-	[AS_HELP_STRING(
-		[--enable-werror],
-		[Turn all compiler warnings into errors, with exceptions:
-		 a) deprecation (allow upstream to mark deprecation without breaking builds);
-		 b) "#warning" pragmas (allow to remind ourselves of errors without breaking builds)
-		]
-	)],
-	[werror=$enableval], [werror="no"])
-if test x"$werror" = x"yes"
-then
-	WERROR_FLAGS="-Werror"
-	WERROR_FLAGS+=" -Wno-error=deprecated -Wno-error=deprecated-declarations"
-	WERROR_FLAGS+=" -Wno-error=cpp" # "#warning"
-	CFLAGS="$CFLAGS $WERROR_FLAGS"
-	CPPFLAGS="$CPPFLAGS $WERROR_FLAGS"
-fi
-
-dnl Checks for typedefs, structures and compiler characteristics
-
-# The following test is taken from WebKit's webkit.m4
-saved_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -fvisibility=hidden "
-AC_MSG_CHECKING([if ${CC} supports -fvisibility=hidden])
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([char foo;])],
-      [ AC_MSG_RESULT([yes])
-        SYMBOL_VISIBILITY="-fvisibility=hidden"],
-        AC_MSG_RESULT([no]))
-CFLAGS="$saved_CFLAGS"
-AC_SUBST(SYMBOL_VISIBILITY)
-
-AX_CHECK_COMPILE_FLAG([-Werror=implicit], [CFLAGS="$CFLAGS -Werror=implicit"])
-AX_CHECK_COMPILE_FLAG([-Werror=maybe-uninitialized], [CFLAGS="$CFLAGS -Werror=maybe-uninitialized"])
-AX_CHECK_COMPILE_FLAG([-Werror=memset-transposed-args], [CFLAGS="$CFLAGS -Werror=memset-transposed-args"])
-AX_CHECK_COMPILE_FLAG([-Werror=null-dereference], [CFLAGS="$CFLAGS -Werror=null-dereference"])
-AX_CHECK_COMPILE_FLAG([-Werror=sizeof-array-argument], [CFLAGS="$CFLAGS -Werror=sizeof-array-argument"])
-AX_CHECK_COMPILE_FLAG([-Werror=sizeof-pointer-memaccess], [CFLAGS="$CFLAGS -Werror=sizeof-pointer-memaccess"])
-
-# Coverage build taken from WebKit's configure.in
-AC_MSG_CHECKING([whether to enable code coverage support])
-AC_ARG_ENABLE(coverage,
-              AC_HELP_STRING([--enable-coverage],
-                             [enable code coverage support [default=no]]),
-              [],[enable_coverage="no"])
-AC_MSG_RESULT([$enable_coverage])
-if test "$enable_coverage" = "yes"; then
-   COVERAGE_CFLAGS="-ftest-coverage -fprofile-arcs"
-   COVERAGE_LDFLAGS="-ftest-coverage -fprofile-arcs"
-   AC_SUBST([COVERAGE_CFLAGS])
-   AC_SUBST([COVERAGE_LDFLAGS])
-fi
-
-AC_ARG_ENABLE([vty_tests],
-		AC_HELP_STRING([--enable-vty-tests],
-				[Include the VTY/CTRL tests in make check (deprecated)
-				[default=no]]),
-		[enable_ext_tests="$enableval"],[enable_ext_tests="no"])
-AC_ARG_ENABLE([external_tests],
-		AC_HELP_STRING([--enable-external-tests],
-				[Include the VTY/CTRL tests in make check [default=no]]),
-		[enable_ext_tests="$enableval"],[enable_ext_tests="no"])
-if test "x$enable_ext_tests" = "xyes" ; then
-	AM_PATH_PYTHON
-	AC_CHECK_PROG(OSMOTESTEXT_CHECK,osmotestvty.py,yes)
-	 if test "x$OSMOTESTEXT_CHECK" != "xyes" ; then
-		AC_MSG_ERROR([Please install git://osmocom.org/python/osmo-python-tests to run the VTY/CTRL tests.])
-	fi
-fi
-AC_MSG_CHECKING([whether to enable VTY/CTRL tests])
-AC_MSG_RESULT([$enable_ext_tests])
-AM_CONDITIONAL(ENABLE_EXT_TESTS, test "x$enable_ext_tests" = "xyes")
-
-# Generate manuals
-AC_ARG_ENABLE(manuals,
-	[AS_HELP_STRING(
-		[--enable-manuals],
-		[Generate manual PDFs [default=no]],
-	)],
-	[osmo_ac_build_manuals=$enableval], [osmo_ac_build_manuals="no"])
-AM_CONDITIONAL([BUILD_MANUALS], [test x"$osmo_ac_build_manuals" = x"yes"])
-AC_ARG_VAR(OSMO_GSM_MANUALS_DIR, [path to common osmo-gsm-manuals files, overriding pkg-config and "../osmo-gsm-manuals"
-	fallback])
-if test x"$osmo_ac_build_manuals" = x"yes"
-then
-	# Find OSMO_GSM_MANUALS_DIR (env, pkg-conf, fallback)
-	if test -n "$OSMO_GSM_MANUALS_DIR"; then
-		echo "checking for OSMO_GSM_MANUALS_DIR... $OSMO_GSM_MANUALS_DIR (from env)"
-	else
-		OSMO_GSM_MANUALS_DIR="$($PKG_CONFIG osmo-gsm-manuals --variable=osmogsmmanualsdir 2>/dev/null)"
-		if test -n "$OSMO_GSM_MANUALS_DIR"; then
-			echo "checking for OSMO_GSM_MANUALS_DIR... $OSMO_GSM_MANUALS_DIR (from pkg-conf)"
-		else
-			OSMO_GSM_MANUALS_DIR="../osmo-gsm-manuals"
-			echo "checking for OSMO_GSM_MANUALS_DIR... $OSMO_GSM_MANUALS_DIR (fallback)"
-		fi
-	fi
-	if ! test -d "$OSMO_GSM_MANUALS_DIR"; then
-		AC_MSG_ERROR("OSMO_GSM_MANUALS_DIR does not exist! Install osmo-gsm-manuals or set OSMO_GSM_MANUALS_DIR.")
-	fi
-
-	# Find and run check-depends
-	CHECK_DEPENDS="$OSMO_GSM_MANUALS_DIR/check-depends.sh"
-	if ! test -x "$CHECK_DEPENDS"; then
-		CHECK_DEPENDS="osmo-gsm-manuals-check-depends"
-	fi
-	if ! $CHECK_DEPENDS; then
-		AC_MSG_ERROR("missing dependencies for --enable-manuals")
-	fi
-
-	# Put in Makefile with absolute path
-	OSMO_GSM_MANUALS_DIR="$(realpath "$OSMO_GSM_MANUALS_DIR")"
-	AC_SUBST([OSMO_GSM_MANUALS_DIR])
-fi
-
-# https://www.freedesktop.org/software/systemd/man/daemon.html
-AC_ARG_WITH([systemdsystemunitdir],
-     [AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files])],,
-     [with_systemdsystemunitdir=auto])
-AS_IF([test "x$with_systemdsystemunitdir" = "xyes" -o "x$with_systemdsystemunitdir" = "xauto"], [
-     def_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)
-
-     AS_IF([test "x$def_systemdsystemunitdir" = "x"],
-   [AS_IF([test "x$with_systemdsystemunitdir" = "xyes"],
-    [AC_MSG_ERROR([systemd support requested but pkg-config unable to query systemd package])])
-    with_systemdsystemunitdir=no],
-   [with_systemdsystemunitdir="$def_systemdsystemunitdir"])])
-AS_IF([test "x$with_systemdsystemunitdir" != "xno"],
-      [AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir])])
-AM_CONDITIONAL([HAVE_SYSTEMD], [test "x$with_systemdsystemunitdir" != "xno"])
-
-AC_MSG_RESULT([CFLAGS="$CFLAGS"])
-AC_MSG_RESULT([CPPFLAGS="$CPPFLAGS"])
-
-dnl Generate the output
-AM_CONFIG_HEADER(bscconfig.h)
-
-AC_OUTPUT(
-    libosmo-mgcp-client.pc
-    include/Makefile
-    include/osmocom/Makefile
-    include/osmocom/mgcp_client/Makefile
-    include/osmocom/mgcp/Makefile
-    src/Makefile
-    src/libosmo-mgcp-client/Makefile
-    src/libosmo-mgcp/Makefile
-    src/osmo-mgw/Makefile
-    tests/Makefile
-    tests/atlocal
-    tests/mgcp_client/Makefile
-    tests/mgcp/Makefile
-    doc/Makefile
-    doc/examples/Makefile
-    doc/manuals/Makefile
-    contrib/Makefile
-    contrib/systemd/Makefile
-    Makefile)

contrib/Makefile.am

@@ -1,3 +0,0 @@
-SUBDIRS = systemd
-
-EXTRA_DIST = ipa.py

contrib/ipa.py

@@ -1,278 +0,0 @@
-#!/usr/bin/python3
-# -*- mode: python-mode; py-indent-tabs-mode: nil -*-
-"""
-/*
- * Copyright (C) 2016 sysmocom s.f.m.c. GmbH
- *
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-"""
-
-import struct, random, sys
-
-class IPA(object):
-    """
-    Stateless IPA protocol multiplexer: add/remove/parse (extended) header
-    """
-    version = "0.0.5"
-    TCP_PORT_OML = 3002
-    TCP_PORT_RSL = 3003
-    # OpenBSC extensions: OSMO, MGCP_OLD
-    PROTO = dict(RSL=0x00, CCM=0xFE, SCCP=0xFD, OML=0xFF, OSMO=0xEE, MGCP_OLD=0xFC)
-    # ...OML Router Control, GSUP GPRS extension, Osmocom Authn Protocol
-    EXT = dict(CTRL=0, MGCP=1, LAC=2, SMSC=3, ORC=4, GSUP=5, OAP=6)
-    # OpenBSC extension: SCCP_OLD
-    MSGT = dict(PING=0x00, PONG=0x01, ID_GET=0x04, ID_RESP=0x05, ID_ACK=0x06, SCCP_OLD=0xFF)
-    _IDTAG = dict(SERNR=0, UNITNAME=1, LOCATION=2, TYPE=3, EQUIPVERS=4, SWVERSION=5, IPADDR=6, MACADDR=7, UNIT=8)
-    CTRL_GET = 'GET'
-    CTRL_SET = 'SET'
-    CTRL_REP = 'REPLY'
-    CTRL_ERR = 'ERR'
-    CTRL_TRAP = 'TRAP'
-
-    def _l(self, d, p):
-        """
-        Reverse dictionary lookup: return key for a given value
-        """
-        if p is None:
-            return 'UNKNOWN'
-        return list(d.keys())[list(d.values()).index(p)]
-
-    def _tag(self, t, v):
-        """
-        Create TAG as TLV data
-        """
-        return struct.pack(">HB", len(v) + 1, t) + v
-
-    def proto(self, p):
-        """
-        Lookup protocol name
-        """
-        return self._l(self.PROTO, p)
-
-    def ext(self, p):
-        """
-        Lookup protocol extension name
-        """
-        return self._l(self.EXT, p)
-
-    def msgt(self, p):
-        """
-        Lookup message type name
-        """
-        return self._l(self.MSGT, p)
-
-    def idtag(self, p):
-        """
-        Lookup ID tag name
-        """
-        return self._l(self._IDTAG, p)
-
-    def ext_name(self, proto, exten):
-        """
-        Return proper extension byte name depending on the protocol used
-        """
-        if self.PROTO['CCM'] == proto:
-            return self.msgt(exten)
-        if self.PROTO['OSMO'] == proto:
-            return self.ext(exten)
-        return None
-
-    def add_header(self, data, proto, ext=None):
-        """
-        Add IPA header (with extension if necessary), data must be represented as bytes
-        """
-        if ext is None:
-            return struct.pack(">HB", len(data) + 1, proto) + data
-        return struct.pack(">HBB", len(data) + 1, proto, ext) + data
-
-    def del_header(self, data):
-        """
-        Strip IPA protocol header correctly removing extension if present
-        Returns data length, IPA protocol, extension (or None if not defined for a give protocol) and the data without header
-        """
-        if not len(data):
-            return None, None, None, None
-        (dlen, proto) = struct.unpack('>HB', data[:3])
-        if self.PROTO['OSMO'] == proto or self.PROTO['CCM'] == proto: # there's extension which we have to unpack
-            return struct.unpack('>HBB', data[:4]) + (data[4:], ) # length, protocol, extension, data
-        return dlen, proto, None, data[3:] # length, protocol, _, data
-
-    def split_combined(self, data):
-        """
-        Split the data which contains multiple concatenated IPA messages into tuple (first, rest) where rest contains remaining messages, first is the single IPA message
-        """
-        (length, _, _, _) = self.del_header(data)
-        return data[:(length + 3)], data[(length + 3):]
-
-    def tag_serial(self, data):
-        """
-        Make TAG for serial number
-        """
-        return self._tag(self._IDTAG['SERNR'], data)
-
-    def tag_name(self, data):
-        """
-        Make TAG for unit name
-        """
-        return self._tag(self._IDTAG['UNITNAME'], data)
-
-    def tag_loc(self, data):
-        """
-        Make TAG for location
-        """
-        return self._tag(self._IDTAG['LOCATION'], data)
-
-    def tag_type(self, data):
-        """
-        Make TAG for unit type
-        """
-        return self._tag(self._IDTAG['TYPE'], data)
-
-    def tag_equip(self, data):
-        """
-        Make TAG for equipment version
-        """
-        return self._tag(self._IDTAG['EQUIPVERS'], data)
-
-    def tag_sw(self, data):
-        """
-        Make TAG for software version
-        """
-        return self._tag(self._IDTAG['SWVERSION'], data)
-
-    def tag_ip(self, data):
-        """
-        Make TAG for IP address
-        """
-        return self._tag(self._IDTAG['IPADDR'], data)
-
-    def tag_mac(self, data):
-        """
-        Make TAG for MAC address
-        """
-        return self._tag(self._IDTAG['MACADDR'], data)
-
-    def tag_unit(self, data):
-        """
-        Make TAG for unit ID
-        """
-        return self._tag(self._IDTAG['UNIT'], data)
-
-    def identity(self, unit=b'', mac=b'', location=b'', utype=b'', equip=b'', sw=b'', name=b'', serial=b''):
-        """
-        Make IPA IDENTITY tag list, by default returns empty concatenated bytes of tag list
-        """
-        return self.tag_unit(unit) + self.tag_mac(mac) + self.tag_loc(location) + self.tag_type(utype) + self.tag_equip(equip) + self.tag_sw(sw) + self.tag_name(name) + self.tag_serial(serial)
-
-    def ping(self):
-        """
-        Make PING message
-        """
-        return self.add_header(b'', self.PROTO['CCM'], self.MSGT['PING'])
-
-    def pong(self):
-        """
-        Make PONG message
-        """
-        return self.add_header(b'', self.PROTO['CCM'], self.MSGT['PONG'])
-
-    def id_ack(self):
-        """
-        Make ID_ACK CCM message
-        """
-        return self.add_header(b'', self.PROTO['CCM'], self.MSGT['ID_ACK'])
-
-    def id_get(self):
-        """
-        Make ID_GET CCM message
-        """
-        return self.add_header(self.identity(), self.PROTO['CCM'], self.MSGT['ID_GET'])
-
-    def id_resp(self, data):
-        """
-        Make ID_RESP CCM message
-        """
-        return self.add_header(data, self.PROTO['CCM'], self.MSGT['ID_RESP'])
-
-class Ctrl(IPA):
-    """
-    Osmocom CTRL protocol implemented on top of IPA multiplexer
-    """
-    def __init__(self):
-        random.seed()
-
-    def add_header(self, data):
-        """
-        Add CTRL header
-        """
-        return super(Ctrl, self).add_header(data.encode('utf-8'), IPA.PROTO['OSMO'], IPA.EXT['CTRL'])
-
-    def rem_header(self, data):
-        """
-        Remove CTRL header, check for appropriate protocol and extension
-        """
-        (_, proto, ext, d) = super(Ctrl, self).del_header(data)
-        if self.PROTO['OSMO'] != proto or self.EXT['CTRL'] != ext:
-            return None
-        return d
-
-    def parse(self, data, op=None):
-        """
-        Parse Ctrl string returning (var, value) pair
-        var could be None in case of ERROR message
-        value could be None in case of GET message
-        """
-        (s, i, v) = data.split(' ', 2)
-        if s == self.CTRL_ERR:
-            return None, v
-        if s == self.CTRL_GET:
-            return v, None
-        (s, i, var, val) = data.split(' ', 3)
-        if s == self.CTRL_TRAP and i != '0':
-            return None, '%s with non-zero id %s' % (s, i)
-        if op is not None and i != op:
-            if s == self.CTRL_GET + '_' + self.CTRL_REP or s == self.CTRL_SET + '_' + self.CTRL_REP:
-                return None, '%s with unexpected id %s' % (s, i)
-        return var, val
-
-    def trap(self, var, val):
-        """
-        Make TRAP message with given (vak, val) pair
-        """
-        return self.add_header("%s 0 %s %s" % (self.CTRL_TRAP, var, val))
-
-    def cmd(self, var, val=None):
-        """
-        Make SET/GET command message: returns (r, m) tuple where r is random operation id and m is assembled message
-        """
-        r = random.randint(1, sys.maxsize)
-        if val is not None:
-            return r, self.add_header("%s %s %s %s" % (self.CTRL_SET, r, var, val))
-        return r, self.add_header("%s %s %s" % (self.CTRL_GET, r, var))
-
-    def verify(self, reply, r, var, val=None):
-        """
-        Verify reply to SET/GET command: returns (b, v) tuple where v is True/False verification result and v is the variable value
-        """
-        (k, v) = self.parse(reply)
-        if k != var or (val is not None and v != val):
-            return False, v
-        return True, v
-
-if __name__ == '__main__':
-    print("IPA multiplexer v%s loaded." % IPA.version)

contrib/jenkins.sh

@@ -1,66 +1,57 @@
 #!/usr/bin/env bash
-# jenkins build helper script for openbsc.  This is how we build on jenkins.osmocom.org
-#
-# environment variables:
-# * WITH_MANUALS: build manual PDFs if set to "1"
-# * PUBLISH: upload manuals after building if set to "1" (ignored without WITH_MANUALS = "1")
-#
-
-if ! [ -x "$(command -v osmo-build-dep.sh)" ]; then
-	echo "Error: We need to have scripts/osmo-deps.sh from http://git.osmocom.org/osmo-ci/ in PATH !"
-	exit 2
-fi
-
 
 set -ex
 
-base="$PWD"
-deps="$base/deps"
-inst="$deps/install"
-export deps inst
+rm -rf deps/install
+mkdir deps || true
+export LD_LIBRARY_PATH=$PWD/deps/install/lib
+cd deps
+osmo-deps.sh libosmocore
 
-osmo-clean-workspace.sh
-
-mkdir "$deps" || true
-osmo-build-dep.sh libosmocore "" ac_cv_path_DOXYGEN=false
-
-verify_value_string_arrays_are_terminated.py $(find . -name "*.[hc]")
-
-export PKG_CONFIG_PATH="$inst/lib/pkgconfig:$PKG_CONFIG_PATH"
-export LD_LIBRARY_PATH="$inst/lib"
-export PATH="$inst/bin:$PATH"
-
-osmo-build-dep.sh libosmo-abis
-osmo-build-dep.sh libosmo-netif
-
-# Additional configure options and depends
-CONFIG=""
-if [ "$WITH_MANUALS" = "1" ]; then
-	osmo-build-dep.sh osmo-gsm-manuals
-	CONFIG="--enable-manuals"
-fi
-
-set +x
-echo
-echo
-echo
-echo " =============================== osmo-mgw ==============================="
-echo
-set -x
-
-cd "$base"
+cd libosmocore
 autoreconf --install --force
-./configure --enable-vty-tests --enable-external-tests --enable-werror $CONFIG
-$MAKE $PARALLEL_MAKE
-LD_LIBRARY_PATH="$inst/lib" $MAKE check \
-  || cat-testlogs.sh
-LD_LIBRARY_PATH="$inst/lib" \
-  DISTCHECK_CONFIGURE_FLAGS="--enable-vty-tests --enable-external-tests $CONFIG" \
-  $MAKE distcheck \
-  || cat-testlogs.sh
+./configure --prefix=$PWD/../install
+$MAKE $PARALLEL_MAKE install
 
-if [ "$WITH_MANUALS" = "1" ] && [ "$PUBLISH" = "1" ]; then
-	make -C "$base/doc/manuals" publish
-fi
 
-osmo-clean-workspace.sh
+cd ../
+osmo-deps.sh libosmo-abis
+cd libosmo-abis
+autoreconf --install --force
+PKG_CONFIG_PATH=$PWD/../install/lib/pkgconfig ./configure --prefix=$PWD/../install  
+PKG_CONFIG_PATH=$PWD/..//install/lib/pkgconfig $MAKE $PARALLEL_MAKE install
+
+cd ../
+osmo-deps.sh libosmo-netif
+cd libosmo-netif
+autoreconf --install --force
+PKG_CONFIG_PATH=$PWD/../install/lib/pkgconfig ./configure --prefix=$PWD/../install  
+PKG_CONFIG_PATH=$PWD/..//install/lib/pkgconfig $MAKE $PARALLEL_MAKE install
+
+cd ../
+osmo-deps.sh libosmo-sccp
+cd libosmo-sccp
+autoreconf --install --force
+PKG_CONFIG_PATH=$PWD/../install/lib/pkgconfig ./configure --prefix=$PWD/../install  
+PKG_CONFIG_PATH=$PWD/..//install/lib/pkgconfig $MAKE $PARALLEL_MAKE install
+
+cd ../
+osmo-deps.sh libsmpp34
+cd libsmpp34
+autoreconf --install --force
+./configure --prefix=$PWD/../install
+$MAKE install
+
+cd ../
+osmo-deps.sh openggsn
+cd openggsn
+autoreconf --install --force
+PKG_CONFIG_PATH=$PWD/../install/lib/pkgconfig ./configure --prefix=$PWD/../install  
+PKG_CONFIG_PATH=$PWD/..//install/lib/pkgconfig $MAKE $PARALLEL_MAKE install
+
+cd ../../openbsc
+autoreconf --install --force
+PKG_CONFIG_PATH=$PWD/../deps/install/lib/pkgconfig ./configure --enable-osmo-bsc --enable-nat $SMPP $MGCP --enable-vty-tests --enable-external-tests
+PKG_CONFIG_PATH=$PWD/../deps/install/lib/pkgconfig $MAKE $PARALLEL_MAKE
+PKG_CONFIG_PATH=$PWD/../deps/install/lib/pkgconfig LD_LIBRARY_PATH=$PWD/../deps/install/lib $MAKE check
+PKG_CONFIG_PATH=$PWD/../deps/install/lib/pkgconfig LD_LIBRARY_PATH=$PWD/../deps/install/lib $MAKE distcheck

contrib/systemd/Makefile.am

@@ -1,6 +0,0 @@
-EXTRA_DIST = osmo-mgw.service
-
-if HAVE_SYSTEMD
-systemdsystemunit_DATA = \
-  osmo-mgw.service
-endif

contrib/systemd/osmo-mgw.service

@@ -1,11 +0,0 @@
-[Unit]
-Description=Osmocom Media Gateway (MGW)
-
-[Service]
-Type=simple
-Restart=always
-ExecStart=/usr/bin/osmo-mgw -s -c /etc/osmocom/osmo-mgw.cfg
-RestartSec=2
-
-[Install]
-WantedBy=multi-user.target

debian/autoreconf

@@ -0,0 +1 @@
+openbsc

debian/changelog

@@ -1,328 +1,67 @@
-osmo-mgw (1.5.0) unstable; urgency=medium
+openbsc (0.14.0) UNRELEASED; urgency=low
 
-  [ Pau Espin Pedrol ]
-  * gitignore: Filter *.pc
-  * configure: Find correct libgsm's gsm.h header
-  * vty: Fix typo writing bts-jitter-buffer-delay-{min,max}
-  * Remove libosmo-legacy-mgcp and osmo-bsc-mgcp
-  * debian: Remove dangling symlink to osmo-bsc-mgcp.service
-  * Install systemd services with autotools
-  * Install sample cfg file to /etc/osmocom
-  * mgcp: Fix osmux_cid_bitmap static array size calculation
-  * mgcp_osmux: Use define to calculate rtp_ssrc_winlen
-  * osmux: Avoid initing output without enabling osmux
-  * mgcp: Log endpoint nr consistently as hex
-  * osmux_send_dummy: Avoid logging incorrectly and sending if osmux not enabled
-  * osmux: Don't process regular osmux frames if disabled by cfg
-  * osmux: Move parse_cid of legacy dummy frames to own function
-  * osmux: Make func handling dummy frames independent of endp type
-  * osmux: allow enabling osmux only on correct activating state
-  * osmux: Improve checks around activating and using enabled osmux
-  * osmux.h: Document enum osmux_state
-  * osmux: Avoid processing further frames if conn not found
+  * New upstream tag and additional patches.
 
-  [ Philipp Maier ]
-  * mgcp_client_fsm: allow ptmap in mgcp_client_fsm as well
-  * mgcp_network: translate payload type numbers in RTP packets
-  * mgcp_client: use IETF source port as for MGCP
-  * mgcp_client: increment local port number when port is in use
-  * mgcp_test: release endpoints after use
-  * network: do not patch PT of RTCP packets
-  * network: check packets before further processing
-  * Cosmetic: remove misplaced line break
-  * mgcp_sdp: restructure mgcp_write_response_sdp() (rtpmap)
-  * mgcp_sdp: restructure mgcp_write_response_sdp() (audio)
-  * mgcp_client: check local port only once
-  * mgcp_client_fsm: switch to MGCP_CONN_RECV_SEND in add_audio()
-  * mgcp_protocol: increase buffer space for codec name in LCO
-  * osmo-mgw: Add vty reference manual
+ -- Holger Hans Peter Freyther <holger@freyther.de>  Sat, 14 Mar 2015 20:33:25 +0100
 
-  [ Neels Hofmeyr ]
-  * fix handling of "Wrong domain name" error
-  * interpret domain '*' as 'allow any domain'
-  * cosmetic: log: fix "CallIDs does not match"
-  * fix 3G hack: allow any IP for loopback and 0.0.0.0
-  * cosmetic: drop code dup in mgcp_client_fsm.c CRCX
-  * add X-Osmo-IGN MGCP header to ignore CallID
-  * X-Osmo-IGN: rather parse items by token, not char
-  * mgcp_test: fix log of conn_id presence
-  * mgcp_test: fix get_conn_id_from_response() CI length
-  * mgcp_client_test: cosmetically re-arrange reply_to() args
-  * mgcp_client_test: use "\r\n\r\n" instead of "\n\n"
-  * mgcp_client_test: also verify received conn_id
-  * mgcp_client_test: test long conn_id
-  * mgcp_client: error on too long conn id
-  * mgcp_common: rename to MGCP_CONN_ID_MAXLEN
-  * doc: fix mgcp_verify_ci() return val doc
-  * mgcp_verify_ci(): return meaningful error codes
-  * fix mgcp_verify_ci(): off-by-one in max len check
-  * generate shorter 'I:' conn IDs
-  * mgcp_conn_get(): compare conn Id ('I:') case insensitively
-  * mgcp_conn_get(): match conn Id ('I:') despite leading zeros
-  * cosmetic: mgcp_test: fix get_conn_id_from_response()
-  * comment: indicate struct type for mgcp_endpoint.conns
-  * log: avoid logging early media as error
-  * fix osmo-mgw -s; fixes osmo-mgw.service using -s
-  * Importing history from osmo-gsm-manuals.git
-  * OsmoMGW: update VTY reference
-  * OsmoMGW: document the 'X-Osmo-IGN' MGCP extension
-  * mgw: update vty reference
-  * drop/replace very weird logging in mgcp_client.c
-  * check_rtp: on IP:port errors, log the IP and port
-  * osmo-mgw: err-log: include expected domain name
-  * mgcp_client_vty: fix missing talloc_free
-  * mgcp_client: drop a bunch of dead code
-  * mgcp_client: logging tweaks
-  * mgcp_client: make domain part of endpoint configurable
-  * mgcp_client: tweak some log levels INFO -> {DEBUG,ERROR}
+openbsc (0.12.0+git26-7) unstable; urgency=low
 
-  [ Stefan Sperling ]
-  * add VTY commands which show specific mgcp endpoints
-  * add MGCP CRCX command statistics to osmo-mgw
-  * show RTP TX/RX stats in 'mgcp show stats' output
-  * use local variable for rate counters in handle_create_con()
-  * add more mgcp crxc error counters
-  * add MDCX command statistics to osmo-mgw
-  * add aggregated rtp connection stats to osmo-mgw
-  * add DLCX command statistics to osmo-mgw
+  * 64bit fix for the MGCP rewriting
 
-  [ Harald Welte ]
-  * debian/rules: Don't overwrite .tarball-version
-  * check_rtp_origin(): Don't memcmp sockadd_in and in_addr
-  * check_rtp_origin(): Avoid using memcmp for comparing integer types
-  * vty-ref: Update URI of docbook 5.0 schema
+ -- Holger Hans Peter Freyther <holger@freyther.de>  Wed, 07 Nov 2012 11:39:34 +0100
 
-  [ Daniel Willmann ]
-  * mgw: Add new VTY reference
-  * Add initial OsmoMGW manual
+openbsc (0.12.0+git26-6) precise; urgency=low
 
-  [ Oliver Smith ]
-  * build manuals moved here from osmo-gsm-manuals.git
-  * jenkins.sh: remove leftover MGCP env variable
-  * Fix DISTCHECK_CONFIGURE_FLAGS override
-  * contrib/jenkins.sh: build and publish manuals
-  * contrib: fix makedistcheck with disabled systemd
+  * Added init script for osmocom-sgsn. 
 
- -- Harald Welte <laforge@gnumonks.org>  Sun, 20 Jan 2019 15:02:18 +0100
+ -- Eric Butler <eric@codebutler.com>  Fri, 24 Aug 2012 21:04:32 -0700
 
-osmo-mgw (1.4.0) unstable; urgency=medium
+openbsc (0.12.0+git26-5) precise; urgency=low
 
-  [ Philipp Maier ]
-  * network: independently initalize state->out_stream
-  * stats: use libosmocore rate counter for in/out_stream.err_ts_counter
-  * mgcp_sdp: correct apidoc of mgcp_parse_sdp_data
-  * vty: clean up rtp port-range command
-  * sdp: remove unused alt_codec field from struct mgcp_rtp_end
-  * sdp: remove circular inclusion
-  * protocol: Try whole port range on port allocation
-  * client: do not start connections in loopback mode
-  * mgcp_network: do not log destination invalid ip/port as error
-  * cosmetic: fix log output
-  * conn: call talloc_free before setting the pointer to NULL
-  * protocol: do not change LCO, when no LCO are present
-  * protocol: reject illegal lco options
-  * cosmetic: fix typo
-  * mgw: clean up codec negotiation (sdp)
-  * client: add features to generate and parse codec information
-  * mgcp_internal: remove unused struct member
-  * stats: replace packet statistic counters with libosmocore rate counters
-  * stat+vty: fix printing of rate counter values
-  * protocol: prevent unnecessary null pointer deref
+  * Don't enable MNCC sock by default.
+  * Automatically create important directories.
+  * Fix init script 'stop' command.
 
-  [ Pau Espin Pedrol ]
-  * legacy-mgcp: Add jitter buffer on the uplink receiver
-  * legacy-mgcp: switch to new osmux output APIs
-  * mgcp: mgcp_osmux: use conn_bts when forwarding pkts from bsc_nat
-  * mgcp: switch to new osmux output APIs
-  * debian: Package installed example doc files
-  * gitignore: Add m4 scripts from m4 subdir
+ -- Eric Butler <eric@codebutler.com>  Fri, 24 Aug 2012 20:56:33 -0700
 
-  [ Neels Hofmeyr ]
-  * api doc: fix parameter name for mgcp_conn_create()
-  * mgcp-client: add mgcp_conn_get_ci()
-  * mgcp_client_fsm: improve error logging
-  * cosmetic: fix doxygen comment markers
-  * cosmetic: mgcp_network.c: merge one LOGPC to its preceding LOGP
-  * IuUP hack: make RTP patching less general
+openbsc (0.12.0+git26-4) precise; urgency=low
 
-  [ Harald Welte ]
-  * cosmetic: fix typo in log message: 'abrupt' instead of 'aprupt'
+  * Specify HLR path and enable RTP proxy.
 
-  [ Daniel Willmann ]
-  * git-version-gen: Don't check for .git directory
+ -- Eric Butler <eric@codebutler.com>  Mon, 20 Aug 2012 00:21:07 -0700
 
- -- Pau Espin Pedrol <pespin@sysmocom.de>  Fri, 27 Jul 2018 19:05:22 +0200
+openbsc (0.12.0+git26-3) precise; urgency=low
 
-osmo-mgw (1.3.0) unstable; urgency=medium
+  * Fix init script.
 
-  [ Pau Espin Pedrol ]
-  * contrib: Add osmo-mgw systemd service
-  * legacy: mgcp_protocol: Don't print osmux stats if it is off
-  * mgcp_stat: Don't print osmux stats if it is off
+ -- Eric Butler <eric@codebutler.com>  Sun, 19 Aug 2012 16:05:44 -0700
 
-  [ Neels Hofmeyr ]
-  * fix segfault: DLCX for unknown endpoint: dont try to log NULL endpoint
-  * MGCP endpoints: parse as decimal, not hex
-  * add --enable-sanitize config option
-  * legacy_mgcp: mgcp_test: sanitize: free msgb_ctx
-  * mgcp_test: test_packet_error_detection: sanitize: free all conns
-  * mgcp_test: test_no_cycle: sanitize: free endp
-  * mgcp_test: sanitize: free msgb_ctx
-  * mgcp_client: don't configure "bts base"
-  * Revert "mgcp_client: don't configure "bts base"" until osmo-msc is ready
-  * mgcp_client: add transaction cleanup
-  * mgcp_client_test makefile: add update_exp target
-  * cosmetic: mgcp_network: typo in log
-  * osmo-mgw: Add talloc context introspection via VTY
-  * mgcp_client: show failure by MGCP SDP section parsing test
-  * mgcp_client: cosmetic: clean up SDP params parsing
-  * mgcp_client: detect SDP section-start parsing errors
-  * compiler warning: ignore deprecated in mgcp_client_test.c
-  * configure: add --enable-werror
-  * jenkins.sh: add --enable-werror to configure flags
-  * cosmetic: mgcp, legacy_mgcp: drop unused vty.h definitions
-  * use osmo_init_logging2() with proper talloc ctx
+openbsc (0.12.0+git26-2) precise; urgency=low
 
-  [ Philipp Maier ]
-  * osmux: fix nullpointer dereference
-  * cosmetic: guard dead osmux vty code with ifdef
-  * cosmetic: remove prefix "net" from rtp related vty commands
-  * doc: update sample config file
-  * cosmetic: use correct VTY port number constant
-  * vty: simplify endpoint allocation
-  * vty: do not change number_endpoints at runtime
-  * MGCP: Connection Identifiers are hex strings
-  * libosmo-mgcp: Connection Identifiers are allocated by MGW, not CA
-  * client: use osmo_strlcpy instead of strncpy
-  * cosmetic: fix sourcecode formatting
-  * cosmetic: clearly mark endpoint numbers as hex
-  * client: use string as connection identifier
-  * conn: remove assertions
-  * mgcp_test: fix wrong strcmp() parameters
-  * mgcp_test: fix nullpointer dereference
-  * mgcp_test: add returncode check
-  * mgcp_test: fix possible double free
-  * mcgp_client: mgcp_msg_gen(): add checks to verify params
-  * network: use originating RTP packet address for loopback
-  * client: mgcp_response_parse_params: check rtp port
-  * mgcp: allow endpoints beginning from zero
-  * client/common: move constant MGCP_ENDPOINT_MAXLEN
-  * mgcp: make domain name configurable
-  * cosmetic: protocol: remove unnecessary nul termination
-  * client: do not insist on \n\n when parsing MGCP messages
-  * main: display mgcp ip/port
-  * client: make callid in MDCX mandatory
-  * client: add missing mandatory SDP fields
-  * mgcp: permit wildcarded endpoint assignment (CRCX)
-  * mgcp: add prefix to virtual trunk
-  * client: eliminate destructive parameter parsing
-  * client: eliminate destructive head parsing
-  * cosmetic: client: add doxygen comments
-  * protocol: fix problem with line break and OSMUX
-  * protocol: fix missing carriage return
-  * client: fix sdp parameter ordering
-  * protocol: check the packetization in local cx options
-  * cosmetic: remove spaces from pointer symbol
-  * client: Do not accept endpoint ids with wildcards in responses
-  * client: do not accept endpoint ids without @ character in responses
-  * client: prohibit endpoint ids without @ character
-  * protocol: on wildcarded CRCX return endpoint number as hex
-  * msg: fix response code on exhausted endp resources
-  * cosmetic: move mgcp_release_endp() to mgcp_ep.c
-  * client: use heap to store mgcp_response
-  * ep: move endpoint struct and define to mgcp_ep.h
-  * cosmetic: rename mgcp_release_endp to mgcp_endp_release
-  * cosmetic: rename mgcp_ep.c/h to mgcp_endp.c/h
-  * protocol: reject DLCX/CRCX/MDCX on unsupported parameters
-  * protocol: exit cleanly when local cx options check fails
-  * cosmetic: Add missing \n on log line
-  * protocol: check requested connection mode
-  * protocol: fix tagging of wildcarded requests
-  * protocol: prohibit wildcarded requests for MDCX and DLCX
-  * mgcp: fix use-after-free and add callback for endpoint cleanup
-  * client: add an optional FSM interface
-  * mgcp_client_fsm: Add FSM event names
-  * cosmetic: mgcp_client_fsm: rename enums
-  * cosmetic: rename function .._conn_reset() to .._conn_init()
-  * mgcp_conn: do not touch u.rtp in mgcp_conn_alloc()
-  * cosmetic: rename .._codec_reset() to .._codec_init()
-  * mgcp_conn: add function mgcp_rtp_conn_cleanup()
-  * stats: use libosmocore rate counter for in/out_stream.err_ts_counter
+  * Fix libdbi package dependency.
 
-  [ Alexander Couzens ]
-  * debian/control: correct library dependency of osmo-mgw against libosmo-mgcp1
-  * debian: include systemd service osmo-mgw.service
-  * Revert "stats: use libosmocore rate counter for in/out_stream.err_ts_counter"
+ -- Eric Butler <eric@codebutler.com>  Wed, 15 Aug 2012 00:35:37 -0700
 
-  [ Harald Welte ]
-  * cosmetic: fix whitespaces; we use tabs for indentation
-  * Fix possible buffer overflow in mgcp_conn_dump()
-  * osmo-mgw: Update copyright statement
-  * osmo-mgw: Config file is osmo-mgw.cfg, and not mgcp.cfg
-  * osmo-mgw: Fix copyright notice
-  * strct mgcp_rtp_state: Group + document struct members related to patching
-  * mgcp_rtp_state: grup 'stats' members into sub-structure
-  * mgcp_rtp_end: Group statistics members into 'stats' sub-struct
-  * libosmo-mgcp: Cosmetic spelling fixes in comments
-  * mgcp_msg: We must parse endpoint numbers as hex, not decimal!
-  * mgcp_internal.h: document more struct members with comments
-  * centralize handling of common errors like "endpoint not found"
-  * Return proper MGCP Error codes, as per spec
-  * osmo-mgw: Use libosmocore socket abstraction
-  * osmo-bsc_mgcp: Add LIBOSMONETIF_{CFLAGS,LIBS}
-  * libosmo-mgcp-client is GPLv2+, not AGPLv3+
-  * Turn libosmo-mgcp into local, non-installed library
+openbsc (0.12.0+git26-1) precise; urgency=low
 
-  [ Stefan Sperling ]
-  * enable osmo_fsm vty commands in libosmo-mgcp-client vty
+  * Fix version issue.
 
- -- Pau Espin Pedrol <pespin@sysmocom.de>  Thu, 03 May 2018 17:40:35 +0200
+ -- Eric Butler <eric@codebutler.com>  Tue, 14 Aug 2012 21:00:51 -0700
 
-osmo-mgw (1.2.0) unstable; urgency=medium
+openbsc (0.12.0+git26) precise; urgency=low
 
-  [ Neels Hofmeyr ]
-  * jenkins: use osmo-clean-workspace.sh before and after build
-  * vty: skip installing cmds now always installed by default
-  * mgcp-client vty: use name 'mgw' instead of 'mgcpgw'
-  * mgcp client: vty: tweak doc strings
+  * Updated ubuntu package.
 
-  [ Philipp Maier ]
-  * sdp: refactoring sdp parser/generator
-  * cosmetic: rename bts_codec to codec_str
-  * cosmetic: fix coding style for mgcp_parse_sdp_data()
-  * cosmetic: fix commenting style
-  * cosmetic: correct whitespaces
-  * client: fix stderror logging in unit-test
-  * client: add unified function to generate MGCP messages
-  * client: add ip address parsing to the client
-  * protocol: allow wildcarded DLCX
-  * mgcp: remove port/timeslot calculator functions from  mgcp.h
-  * network: add separate log category
-  * cosmetic: make dummy packet handling more explicit
-  * network: autdetect rtp bind ip-address
-  * network: fix rtp packet length
-  * network: remove unused return code
+ -- Eric Butler <eric@codebutler.com>  Tue, 14 Aug 2012 17:36:51 -0700
 
-  [ Pau Espin Pedrol ]
-  * mgcp_client_vty.c: Fix VTY compatibility with 'mgcpgw bts-base'
-
- -- Harald Welte <laforge@gnumonks.org>  Fri, 10 Nov 2017 11:10:23 +0900
-
-osmo-mgw (1.1.0) unstable; urgency=medium
+openbsc (0.9.13.115.eb113-1) natty; urgency=low
 
   * New upstream release
 
- -- Harald Welte <lafore@gnumonks.org>  Sat, 28 Oct 2017 12:48:41 +0200
+ -- Harald Welte <laforge@gnumonks.org>  Wed, 11 May 2011 18:41:24 +0000
 
-osmo-mgw (1.0.2) unstable; urgency=low
+openbsc (0.9.4-1) unstable; urgency=low
 
-  * First release after major rename.
+  * Initial release
 
- -- Max Suraev <msuraev@sysmocom.de>  Thu, 14 Sep 2017 18:41:05 +0200
-
-
-osmo-mgw (0.1.0) unstable; urgency=low
-
-  * Initial release.
-
- -- Alexander Couzens <lynxis@fe80.eu>  Tue, 08 Aug 2017 01:12:53 +0000
+ -- Harald Welte <laforge@gnumonks.org>  Tue, 24 Aug 2010 13:34:24 +0200

debian/compat

@@ -1 +1 @@
-9
+7

debian/control

@@ -1,35 +1,121 @@
-Source: osmo-mgw
+Source: openbsc
 Section: net
+Priority: optional
+Maintainer: Harald Welte <laforge@gnumonks.org>
+Build-Depends: debhelper (>= 7.0.0~), autotools-dev, pkg-config, libgtp0-dev, libosmocore-dev, libosmo-sccp-dev, libdbi0-dev, dh-autoreconf, libosmo-abis-dev, libosmo-netif-dev, libdbd-sqlite3, libpcap-dev, libssl-dev, libc-ares-dev, libsmpp34-dev
+Standards-Version: 3.8.4
+Homepage: http://openbsc.osmocom.org/
+Vcs-Git: git://bs11-abis.gnumonks.org/openbsc.git
+Vcs-Browser: http://openbsc.osmocom.org/trac/browser
+
+Package: osmocom-bsc
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: GSM Base Station Controller; BSC-only version of OpenBSC.  Needs a real MSC!
+ Classical BSC which requires MSC to operate.
+
+Package: osmocom-nitb
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, libdbd-sqlite3
+Description: GSM Network-in-a-Box, implements BSC, MSC, SMSC, HLR, VLR
+ All the GSM network components bundled together.
+
+Package: osmocom-ipaccess-utils
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Command line utilities for ip.access nanoBTS
+ Utilities specific for ip.access unit.
+
+Package: osmocom-bs11-utils
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Command line utilities for Siemens BS-11 BTS
+ Utilities specific for BS-11 unit.
+
+Package: osmocom-sgsn
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Osmocom Serving GPRS Support Node
+ SGSN implementation.
+
+Package: osmocom-gbproxy
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Osmocom GPRS Gb Interface Proxy
+ Proxy for Gb interface.
+
+Package: osmocom-bsc-nat
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Osmocom Base Station Controller Network Address Translation
+ Network address translation for BSC.
+
+Package: osmo-gtphub
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Osmocom GTP Hub
+ Proxy for comms between multiple SGSNs and GGSNs.
+
+Package: osmocom-bsc-dbg
+Architecture: any
+Section: debug
 Priority: extra
-Maintainer: Alexander Couzens <lynxis@fe80.eu>
-Build-Depends: debhelper (>=9),
-               dh-autoreconf,
-               pkg-config,
-               autotools-dev,
-               libosmocore-dev,
-               libosmo-netif-dev
-Standards-Version: 3.9.8
-Vcs-Git: git://git.osmocom.org/osmo-mgw.git
-Vcs-Browser: https://git.osmocom.org/osmo-mgw/
-Homepage: https://osmocom.org/projects/osmo-mgw
+Depends: osmocom-bsc (= ${binary:Version}), ${misc:Depends}
+Description: Debug symbols for the OpenBSC BSC
+ Make debugging possible
 
-Package: osmo-mgw
+Package: osmocom-nitb-dbg
 Architecture: any
-Multi-Arch: foreign
-Depends: ${misc:Depends}, ${shlibs:Depends}
-Description: OsmoMGW: Osmocom's Media Gateway for 2G and 3G circuit-switched mobile networks
+Section: debug
+Priority: extra
+Depends: osmocom-nitb (= ${binary:Version}), ${misc:Depends}
+Description: Debug symbols for the OpenBSC NITB
+ Make debugging possible
 
-Package: libosmo-mgcp-client5
-Section: libs
+Package: osmocom-ipaccess-utils-dbg
 Architecture: any
-Multi-Arch: same
-Pre-Depends: ${misc:Pre-Depends}
-Depends: ${misc:Depends}, ${shlibs:Depends}
-Description: libosmo-mgcp-client: Osmocom's Media Gateway Control Protocol client utilities
+Section: debug
+Priority: extra
+Depends: osmocom-ipaccess-utils (= ${binary:Version}), ${misc:Depends}
+Description: Debug symbols for the OpenBSC ip.access utils
+ Make debugging possible
 
-Package: libosmo-mgcp-client-dev
-Section: libdevel
+Package: osmocom-bs11-utils-dbg
 Architecture: any
-Multi-Arch: same
-Depends: libosmo-mgcp-client5 (= ${binary:Version}), ${misc:Depends}
-Description: libosmo-mgcp-client: Osmocom's Media Gateway Control Protocol client utilities
+Section: debug
+Priority: extra
+Depends: osmocom-bs11-utils (= ${binary:Version}), ${misc:Depends}
+Description: Debug symbols for the OpenBSC BS11 utils
+ Make debugging possible
+
+Package: osmocom-sgsn-dbg
+Architecture: any
+Section: debug
+Priority: extra
+Depends: osmocom-sgsn (= ${binary:Version}), ${misc:Depends}
+Description: Debug symbols for the OpenBSC Serving GPRS Support Node
+ Make debugging possible
+
+Package: osmocom-gbproxy-dbg
+Architecture: any
+Section: debug
+Priority: extra
+Depends: osmocom-gbproxy (= ${binary:Version}), ${misc:Depends}
+Description: Debug symbols for the OpenBSC GPRS GBProxy
+ Make debugging possible
+
+Package: osmocom-bsc-nat-dbg
+Architecture: any
+Section: debug
+Priority: extra
+Depends: osmocom-bsc-nat (= ${binary:Version}), ${misc:Depends}
+Description: Debug symbols for the OpenBSC Network Address Translation
+ Make debugging possible
+
+Package: osmo-gtphub-dbg
+Architecture: any
+Section: debug
+Priority: extra
+Depends: osmo-gtphub (= ${binary:Version}), ${misc:Depends}
+Description: Debug symbols for Osmocom GTP Hub
+ Make debugging possible

debian/copyright

@@ -1,65 +1,47 @@
-Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
-Upstream-Name: osmo-mgw
-Source: git://git.osmocom.org/osmo-mgw
+This work was packaged for Debian by:
 
-Files:     *
-Copyright: 2009-2014 On-Waves
-           2009-2015 Holger Hans Peter Freyther <zecke@selfish.org>
-           2013 Jacob Erlbeck <jerlbeck@sysmocom.de>
-           2016-2017 sysmocom s.m.f.c. GmbH <info@sysmocom.de>
-License:   AGPL-3.0+
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU Affero General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
- .
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU Affero General Public License for more details.
- .
- You should have received a copy of the GNU Affero General Public License
- along with this program.  If not, see <http://www.gnu.org/licenses/>.
+    Harald Welte <laforge@gnumonks.org> on Tue, 24 Aug 2010 10:55:04 +0200
 
-Files:     src/libosmo-mgcp-client/* include/osmocom/mgcp_client/*
-Copyright: 2016 by sysmocom s.m.f.c. GmbH <info@sysmocom.de>
-           Based on OpenBSC interface to quagga VTY (libmsc/vty_interface_layer3.c)
-           2009 by Harald Welte <laforge@gnumonks.org>
-           2009-2011 by Holger Hans Peter Freyther
-License:   GPL-2.0+
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- .
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
- .
- You should have received a copy of the GNU General Public License
- along with this program.  If not, see <http://www.gnu.org/licenses/>.
+It was downloaded from:
 
-Files:     tests/vty_test_runner.py
-Copyright: 2013 Holger Hans Peter Freyther
-           2013 Katerina Barone-Adesi <kat.obsc@gmail.com>
-License:   GPL-3.0+
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
- .
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
- .
- You should have received a copy of the GNU General Public License
- along with this program.  If not, see <http://www.gnu.org/licenses/>.
- .
- On Debian systems, the complete text of the GNU General Public License
- Version 3 can be found in `/usr/share/common-licenses/GPL-3'.
+    git://bs11-abis.gnumonks.org/openbsc.git
 
-Files:     osmoappdesc.py
-Copyright: 2013 Katerina Barone-Adesi <kat.obsc@gmail.com>
-License:   GPL-3.0+
+Upstream Authors:
+
+    Harald Welte <laforge@gnumonks.org>
+    Dieter Spaar <spaar@mirider.augusta.de>
+    Holger Hans Peter Freyther <zecke@selfish.org>
+    Sylvain Munaut <tnt@246tNt.com>
+    Daniel Willmann <daniel@totalueberwachung.de>
+    Jan Luebbe <jluebbe@debian.org>
+    Mike Haben <michael.haben@btinternet.com>
+    Andreas Eversberg <Andreas.Eversberg@versatel.de>
+
+Copyright:
+
+    Copyright (C) 2008-2010 Harald Welte <laforge@gnumonks.org>
+    Copyright (C) 2008-2009 Dieter Spaar <spaar@mirider.augusta.de>
+    Copyright (C) 2008-2010 Holger Hans Peter Freyther <zecke@selfish.org>
+    Copyright (C) 2009-2010 Sylvain Munaut <tnt@246tNt.com>
+    Copyright (C) 2009-2010 On-Waves
+    Copyright (C) 2008 Daniel Willmann <daniel@totalueberwachung.de>
+    Copyright (C) 2008 Jan Luebbe <jluebbe@debian.org>
+    Copyright (C) 2009 by Mike Haben <michael.haben@btinternet.com>
+    Copyright (C) 2009 Andreas Eversberg <Andreas.Eversberg@versatel.de>
+
+License:
+
+    GNU General Public License, Version 2 or later
+
+The Debian packaging is:
+
+    Copyright (C) 2010 Harald Welte <laforge@gnumonks.org>
+
+# Please chose a license for your packaging work. If the program you package
+# uses a mainstream license, using the same license is the safest choice.
+# Please avoid to pick license terms that are more restrictive than the
+# packaged work, as it may make Debian's contributions unacceptable upstream.
+# If you just want it to be GPL version 3, leave the following lines in.
+
+and is licensed under the GPL version 3,
+see "/usr/share/common-licenses/GPL-3".

debian/docs

@@ -0,0 +1 @@
+openbsc/README

debian/libosmo-mgcp-client-dev.install

@@ -1,4 +0,0 @@
-usr/include/osmocom/mgcp_client
-usr/lib/*/libosmo-mgcp-client.so
-usr/lib/*/libosmo-mgcp-client.a
-usr/lib/*/pkgconfig/libosmo-mgcp-client.pc

debian/libosmo-mgcp-client5.install

@@ -1 +0,0 @@
-usr/lib/*/libosmo-mgcp-client.so.*

debian/osmo-gtphub.default

@@ -0,0 +1,2 @@
+CONFIG_FILE="/etc/osmocom/osmo-gtphub.cfg"
+

debian/osmo-gtphub.examples

@@ -0,0 +1 @@
+openbsc/doc/examples/osmo-gtphub

debian/osmo-gtphub.init

@@ -0,0 +1,150 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          osmo-gtphub
+# Required-Start:    $network $local_fs
+# Required-Stop:
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Osmocom GTP hub
+# Description:       Osmocom GTP hub
+### END INIT INFO
+
+# Author: Neels Hofmeyr <nhofmeyr@sysmocom.de>
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+NAME=osmo-gtphub                         # Introduce the short server's name here
+DESC="Osmocom GTP hub"                   # Introduce a short description here
+DAEMON=/usr/bin/osmo-gtphub              # Introduce the server's location here
+SCRIPTNAME=/etc/init.d/osmo-gtphub
+
+# Exit if the package is not installed
+[ -x $DAEMON ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/osmo-gtphub ] && . /etc/default/osmo-gtphub
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+DAEMON_ARGS="$DAEMON_ARGS -D -c $CONFIG_FILE"
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	start-stop-daemon --start --quiet --exec $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --exec $DAEMON -- \
+		$DAEMON_ARGS \
+		|| return 2
+	# Add code here, if necessary, that waits for the process to be ready
+	# to handle requests from services started subsequently which depend
+	# on this one.  As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+  start)
+    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
+    do_start
+    case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+  ;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  status)
+       status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+       ;;
+  #reload|force-reload)
+	#
+	# If do_reload() is not implemented then leave this commented out
+	# and leave 'force-reload' as an alias for 'restart'.
+	#
+	#log_daemon_msg "Reloading $DESC" "$NAME"
+	#do_reload
+	#log_end_msg $?
+	#;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+		# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+  *)
+	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+	exit 3
+	;;
+esac
+
+:

debian/osmo-gtphub.install

@@ -0,0 +1 @@
+/usr/bin/osmo-gtphub

debian/osmo-mgw.install

@@ -1,4 +0,0 @@
-etc/osmocom/osmo-mgw.cfg
-lib/systemd/system/osmo-mgw.service
-usr/bin/osmo-mgw
-usr/share/doc/osmo-mgw/examples/osmo-mgw/osmo-mgw.cfg

debian/osmocom-bs11-utils.install

@@ -0,0 +1,2 @@
+/usr/bin/bs11_config
+/usr/bin/isdnsync

debian/osmocom-bsc-nat.init

@@ -0,0 +1,153 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          osmocom-bsc-nat
+# Required-Start:    $network $local_fs
+# Required-Stop:
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Osmocom GSM network-in-a-box
+# Description:       A minimal implementation of the GSM Base Station Controller,
+#                    Mobile Switching Center, Home Location regster and all other
+#                    components to run a self-contained GSM network.
+### END INIT INFO
+
+# Author: Harald Welte <laforge@gnumonks.org>
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+NAME=osmo-bsc_nat                      # Introduce the short server's name here
+DESC="Osmocom GSM BSC Multiplexer (NAT)" # Introduce a short description here
+DAEMON=/usr/bin/osmo-bsc_nat           # Introduce the server's location here
+SCRIPTNAME=/etc/init.d/osmocom-bsc-nat
+CONFIG_FILE=/etc/osmocom/osmocom-bsc-nat.cfg
+
+# Exit if the package is not installed
+[ -x $DAEMON ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/osmocom-bsc-nat ] && . /etc/default/osmocom-bsc-nat
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+DAEMON_ARGS="-D -c $CONFIG_FILE"
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	start-stop-daemon --start --quiet --exec $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --exec $DAEMON -- \
+		$DAEMON_ARGS \
+		|| return 2
+	# Add code here, if necessary, that waits for the process to be ready
+	# to handle requests from services started subsequently which depend
+	# on this one.  As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+  start)
+    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
+    do_start
+    case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+  ;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  status)
+       status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+       ;;
+  #reload|force-reload)
+	#
+	# If do_reload() is not implemented then leave this commented out
+	# and leave 'force-reload' as an alias for 'restart'.
+	#
+	#log_daemon_msg "Reloading $DESC" "$NAME"
+	#do_reload
+	#log_end_msg $?
+	#;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+	  	# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+  *)
+	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+	exit 3
+	;;
+esac
+
+:

debian/osmocom-bsc-nat.install

@@ -0,0 +1 @@
+/usr/bin/osmo-bsc_nat

debian/osmocom-bsc.examples

@@ -0,0 +1 @@
+openbsc/doc/examples/osmo-bsc_mgcp

debian/osmocom-bsc.install

@@ -0,0 +1,2 @@
+/usr/bin/osmo-bsc_mgcp
+/usr/bin/osmo-bsc

debian/osmocom-gbproxy.init

@@ -0,0 +1,151 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          osmo-gbproxy
+# Required-Start:    $network $local_fs
+# Required-Stop:
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Osmocom GBproxy
+# Description:       A tool to proxy the GPRS Gb interface.
+### END INIT INFO
+
+# Author: Harald Welte <laforge@gnumonks.org>
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+NAME=osmo-gbproxy                      # Introduce the short server's name here
+DESC="Osmocom GBProxy" # Introduce a short description here
+DAEMON=/usr/bin/osmo-gbproxy           # Introduce the server's location here
+SCRIPTNAME=/etc/init.d/osmocom-gbproxy
+CONFIG_FILE=/etc/osmocom/osmocom-gbproxy.cfg
+
+# Exit if the package is not installed
+[ -x $DAEMON ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/osmocom-gbproxy ] && . /etc/default/osmocom-gbproxy
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+DAEMON_ARGS="-D -c $CONFIG_FILE"
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	start-stop-daemon --start --quiet --exec $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --exec $DAEMON -- \
+		$DAEMON_ARGS \
+		|| return 2
+	# Add code here, if necessary, that waits for the process to be ready
+	# to handle requests from services started subsequently which depend
+	# on this one.  As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+  start)
+    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
+    do_start
+    case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+  ;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  status)
+       status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+       ;;
+  #reload|force-reload)
+	#
+	# If do_reload() is not implemented then leave this commented out
+	# and leave 'force-reload' as an alias for 'restart'.
+	#
+	#log_daemon_msg "Reloading $DESC" "$NAME"
+	#do_reload
+	#log_end_msg $?
+	#;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+	  	# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+  *)
+	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+	exit 3
+	;;
+esac
+
+:

debian/osmocom-gbproxy.install

@@ -0,0 +1 @@
+/usr/bin/osmo-gbproxy

debian/osmocom-ipaccess-utils.install

@@ -0,0 +1,3 @@
+/usr/bin/ipaccess-config
+/usr/bin/abisip-find
+/usr/bin/ipaccess-proxy

debian/osmocom-nitb.default

@@ -0,0 +1,8 @@
+CONFIG_FILE="/etc/osmocom/osmo-nitb.cfg"
+HLR_FILE="/var/lib/osmocom/hlr.sqlite3"
+
+DAEMON_ARGS="-P"
+
+# Uncomment if using LCR+Asterisk
+# DAEMON_ARGS="-m -P"
+

debian/osmocom-nitb.dirs

@@ -0,0 +1,3 @@
+/etc/osmocom
+/var/log/osmocom
+/var/lib/osmocom

debian/osmocom-nitb.examples

@@ -0,0 +1 @@
+openbsc/doc/examples/osmo-nitb

debian/osmocom-nitb.init

@@ -0,0 +1,152 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          osmo-nitb
+# Required-Start:    $network $local_fs
+# Required-Stop:
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Osmocom GSM network-in-a-box
+# Description:       A minimal implementation of the GSM Base Station Controller,
+#                    Mobile Switching Center, Home Location regster and all other
+#                    components to run a self-contained GSM network.
+### END INIT INFO
+
+# Author: Harald Welte <laforge@gnumonks.org>
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+NAME=osmo-nitb                      # Introduce the short server's name here
+DESC="Osmocom GSM Network-in-a-Box" # Introduce a short description here
+DAEMON=/usr/bin/osmo-nitb           # Introduce the server's location here
+SCRIPTNAME=/etc/init.d/osmocom-nitb
+
+# Exit if the package is not installed
+[ -x $DAEMON ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/osmocom-nitb ] && . /etc/default/osmocom-nitb
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+DAEMON_ARGS="$DAEMON_ARGS -D -c $CONFIG_FILE -l $HLR_FILE"
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	start-stop-daemon --start --quiet --exec $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --exec $DAEMON -- \
+		$DAEMON_ARGS \
+		|| return 2
+	# Add code here, if necessary, that waits for the process to be ready
+	# to handle requests from services started subsequently which depend
+	# on this one.  As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+  start)
+    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
+    do_start
+    case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+  ;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  status)
+       status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+       ;;
+  #reload|force-reload)
+	#
+	# If do_reload() is not implemented then leave this commented out
+	# and leave 'force-reload' as an alias for 'restart'.
+	#
+	#log_daemon_msg "Reloading $DESC" "$NAME"
+	#do_reload
+	#log_end_msg $?
+	#;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+	  	# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+  *)
+	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+	exit 3
+	;;
+esac
+
+:

debian/osmocom-nitb.install

@@ -0,0 +1 @@
+/usr/bin/osmo-nitb

debian/osmocom-sgsn.default

@@ -0,0 +1,2 @@
+CONFIG_FILE="/etc/osmocom/osmo-sgsn.cfg"
+

debian/osmocom-sgsn.examples

@@ -0,0 +1 @@
+openbsc/doc/examples/osmo-sgsn

debian/osmocom-sgsn.init

@@ -0,0 +1,150 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          osmo-sgsn
+# Required-Start:    $network $local_fs
+# Required-Stop:
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Osmocom Serving GPRS Support Node
+# Description:       Osmocom Serving GPRS Support Node
+### END INIT INFO
+
+# Author: Harald Welte <laforge@gnumonks.org>
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+NAME=osmo-sgsn                           # Introduce the short server's name here
+DESC="Osmocom Serving GPRS Support Node" # Introduce a short description here
+DAEMON=/usr/bin/osmo-sgsn                # Introduce the server's location here
+SCRIPTNAME=/etc/init.d/osmocom-sgsn
+
+# Exit if the package is not installed
+[ -x $DAEMON ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/osmocom-sgsn ] && . /etc/default/osmocom-sgsn
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+DAEMON_ARGS="$DAEMON_ARGS -D -c $CONFIG_FILE"
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	start-stop-daemon --start --quiet --exec $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --exec $DAEMON -- \
+		$DAEMON_ARGS \
+		|| return 2
+	# Add code here, if necessary, that waits for the process to be ready
+	# to handle requests from services started subsequently which depend
+	# on this one.  As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+  start)
+    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
+    do_start
+    case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+  ;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  status)
+       status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+       ;;
+  #reload|force-reload)
+	#
+	# If do_reload() is not implemented then leave this commented out
+	# and leave 'force-reload' as an alias for 'restart'.
+	#
+	#log_daemon_msg "Reloading $DESC" "$NAME"
+	#do_reload
+	#log_end_msg $?
+	#;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+	  	# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+  *)
+	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+	exit 3
+	;;
+esac
+
+:

debian/osmocom-sgsn.install

@@ -0,0 +1 @@
+/usr/bin/osmo-sgsn

debian/rules

@@ -1,35 +1,42 @@
 #!/usr/bin/make -f
-# You must remove unused comment lines for the released package.
-# See debhelper(7) (uncomment to enable)
-# This is an autogenerated template for debian/rules.
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
 #
-# Output every command that modifies files on the build system.
-#export DH_VERBOSE = 1
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+#
+# Modified to make a template file for a multi-binary package with separated
+# build-arch and build-indep targets  by Bill Allombert 2001
 
-DEBIAN  := $(shell dpkg-parsechangelog | grep '^Version:' | cut -d' ' -f2)
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+DEBIAN  := $(shell dpkg-parsechangelog | grep ^Version: | cut -d' ' -f2)
 DEBVERS := $(shell echo '$(DEBIAN)' | cut -d- -f1)
 VERSION := $(shell echo '$(DEBVERS)' | sed -e 's/[+-].*//' -e 's/~//g')
 
-CFLAGS += -g
+export DEB_BUILD_HARDENING=1
 
-# main packaging script based on dh7 syntax
 %:
-	dh $@ --with autoreconf
+	dh --sourcedirectory=openbsc --with autoreconf $@
 
-# debmake generated override targets
-# Set options for ./configure
-#CONFIGURE_FLAGS = <options for ./configure>
-#overrride_dh_configure:
-#	dh_configure -- $(CONFIGURE_FLAGS)
-#
-# Do not install libtool archive, python .pyc .pyo
-#override_dh_install:
-#	dh_install --list-missing -X.la -X.pyc -X.pyo
+# This is needed for debian stable (squeeze)
+override_dh_autoreconf:
+	cd openbsc && autoreconf --install --force
 
-override_dh_auto_test:
-	dh_auto_test || (find . -name testsuite.log -exec cat {} \; ; false)
+override_dh_strip:
+	dh_strip -posmocom-bsc --dbg-package=osmocom-bsc-dbg
+	dh_strip -posmocom-nitb --dbg-package=osmocom-nitb-dbg
+	dh_strip -posmocom-ipaccess-utils --dbg-package=osmocom-ipaccess-utils-dbg
+	dh_strip -posmocom-bs11-utils --dbg-package=osmocom-bs11-utils-dbg
+	dh_strip -posmocom-sgsn --dbg-package=osmocom-sgsn-dbg
+	dh_strip -posmocom-gbproxy --dbg-package=osmocom-gbproxy-dbg
+	dh_strip -posmocom-bsc-nat --dbg-package=osmocom-bsc-nat-dbg
+	dh_strip -posmo-gtphub --dbg-package=osmo-gtphub-dbg
 
 override_dh_auto_configure:
-	dh_auto_configure -- --with-systemdsystemunitdir=/lib/systemd/system
+	echo $(VERSION) > openbsc/.tarball-version
+	dh_auto_configure --sourcedirectory=openbsc -- --enable-nat --enable-osmo-bsc --enable-smpp
 
-# See https://www.debian.org/doc/manuals/developers-reference/best-pkging-practices.html#bpp-dbg

doc/Makefile.am

@@ -1,4 +0,0 @@
-SUBDIRS = \
-	examples \
-	manuals \
-	$(NULL)

doc/examples/osmo-mgw/osmo-mgw.cfg

@@ -1,18 +0,0 @@
-!
-! MGCP configuration example
-!
-mgcp
-  bind ip 127.0.0.1
-  rtp port-range 4002 16000
-  rtp bind-ip 10.9.1.122
-  rtp ip-probing
-  rtp ip-tos 184
-  bind port 2427
-  sdp audio payload number 98
-  sdp audio payload name GSM
-  number endpoints 31
-  loop 0
-  force-realloc 1
-  rtcp-omit
-  rtp-patch ssrc
-  rtp-patch timestamp

doc/manuals/Makefile.am

@@ -1,16 +0,0 @@
-EXTRA_DIST = osmomgw-usermanual.adoc \
-    osmomgw-usermanual-docinfo.xml \
-    osmomgw-vty-reference.xml \
-    chapters \
-    vty
-
-if BUILD_MANUALS
-  ASCIIDOC = osmomgw-usermanual.adoc
-  ASCIIDOC_DEPS = $(srcdir)/chapters/*.adoc
-  include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.asciidoc.inc
-
-  VTY_REFERENCE = osmomgw-vty-reference.xml
-  include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc
-
-  include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.common.inc
-endif

doc/manuals/chapters/configuration.adoc

@@ -1,57 +0,0 @@
-== Configuring OsmoMGW
-
-A basic configation of OsmoMGW mainly consists of specifying the IP address
-and port on which to listen to MGCP commands, but changing the port range at
-which the RTP streams terminate as well as limiting operation to a single call
-agent can be done as well as changing the number of endpoints.
-
-=== Configuring MGCP
-
-By default OsmoMGW listens for MGCP on port 2427 on any IP address. If a call
-agent address is configured then OsmoMGW will only answer MGCP commands from
-that IP port 2727, otherwise all sources are handled. A domain can be
-specified
-
-.Example: MGCP configuration
-----
-OsmoMGW(config-mgcp)# bind ip 127.0.0.1
-OsmoMGW(config-mgcp)# bind port 2427
-OsmoMGW(config-mgcp)# call-agent ip 127.0.0.1
-OsmoMGW(config-mgcp)# domain mgw-bsc
-OsmoMGW(config-mgcp)# local ip 127.0.0.1
-----
-
-=== Configuring the trunk
-
-The first trunk (trunk 0) is considered a virtual trunk in OsmoMGW. All
-endpoints of type "rtpbridge" are routed here. The virtual trunk is configured
-in the config-mgcp context.
-
-All other trunks are configured in the config-mgcp-trunk context, but the
-commands used are identical. Right now trunks are considered only for ds/e1
-type endpoints which are not yet implemented. Don't use trunks other than the
-"virtual" trunk 0.
-
-.Example: MGCP trunk configuration
-----
-OsmoMGW(config-mgcp)# number endpoints 63 <1>
-OsmoMGW(config-mgcp)# rtp bind-ip 10.0.0.1 <2>
-OsmoMGW(config-mgcp)# rtp port-range 12000-14000 <3>
-----
-<1> Maximum number of endpoints that can be allocated at once
-<2> Use this IP when binding RTP endpoints
-<3> Use ports in this range when binding RTP endpoints
-
-There are some options to tweak how RTP forwarding behaves in OsmoMGW:
-
-.Example: MGCP trunk rtp options
-----
-OsmoMGW(config-mgcp)# rtp keep-alive 30 <1>
-OsmoMGW(config-mgcp)# rtp-patch ssrc <2>
-OsmoMGW(config-mgcp)# rtp-patch timestamp <3>
-----
-<1> Send dummy UDP packets periodically to RTP destination
-<2> Hide SSRC changes
-<3> Ensure RTP timestamp is aligned with frame duration
-
-

doc/manuals/chapters/counters.adoc

@@ -1,4 +0,0 @@
-[[counters]]
-== Counters
-
-include::./counters_generated.adoc[]

doc/manuals/chapters/counters_generated.adoc

@@ -1,14 +0,0 @@
-
-// autogenerated by show asciidoc counters
-These counters and their description based on OsmoMGW 1.3.0.34-9cd52 (OsmoMGW).
-
-=== Rate Counters
-
-// generating tables for rate_ctr_group
-== Osmo Stat Items
-
-// generating tables for osmo_stat_items
-== Osmo Counters
-
-// generating tables for osmo_counters
-// there are no ungrouped osmo_counters

doc/manuals/chapters/mgcp_extensions.adoc

@@ -1,68 +0,0 @@
-== MGCP Extensions
-
-The MGCP protocol is extendable. The following non-standard extensions are
-understood by OsmoMGW.
-
-=== `X-Osmo-IGN`
-
-`X-Osmo-IGN` indicates to OsmoMGW that specific items of an endpoint should be
-ignored, so that it is lenient on mismatching values that would normally
-indicate collisions or configuration errors.
-
-==== `X-Osmo-IGN` Format
-
-The value part of X-Osmo-IGN must be one or more items separated by one or more
-spaces. Each item consists of one or more non-whitespace characters.
-
-.Example: `X-Osmo-IGN` format with three ficticious items "X", "abc" and "123".
-----
-X-Osmo-IGN: X abc 123
-----
-
-`X-Osmo-IGN` must be issued in the MGCP section (typically as its last item),
-before the SDP section starts.
-
-==== Supported `X-Osmo-IGN` Items
-
-Currently, the following `X-Osmo-IGN` items are supported:
-
-* `C`: ignore CallID mismatches, i.e. differing "C" values between connections
-  on the same endpoint.
-
-.Note:
-`X-Osmo-IGN` does not support ignoring mismatches on the domain part of
-an endpoint name, e.g. ignoring a mismatch on "example.com" in
-`rtpbridge/123abc@example.com`. Instead, you may globally configure OsmoMGW
-with `mgcp` / `domain *` to permit all domain parts.
-
-===== `X-Osmo-IGN: C`
-
-By default, OsmoMGW verifies that all CallIDs ("C" values) match for all
-connections on any one given endpoint. To ignore CallID mismatches, pass a `C`
-in the `X-Osmo-IGN` header, for the first or the second `CRCX` on an endpoint.
-When the `X-Osmo-IGN: C` is sent for any one `CRCX` on an endpoint, CallID
-mismatches will be ignored for that and all subsequent messages for that
-endpoint. Hence this header only needs to be included once per endpoint, in any
-`CRCX` message that precedes or coincides with a CallID mismatch.
-
-This is particularly useful for a BSC that is connected to an A/SCCPlite MSC,
-where the BSC and MSC each are expected to configure their respective own
-connection on a shared endpoint. For A/SCCPlite, it is impossible for the BSC
-to know the CallID that the MSC will use, so CallID mismatches are inevitable.
-See also OsmoBSC, which will by default pass the `X-Osmo-IGN: C` header for
-endpoints associated with an A/SCCPlite MSC.
-
-.Example: `CRCX` message that instructs OsmoMGW to ignore CallID mismatches
-----
-CRCX 2 rtpbridge/123abc@mgw MGCP 1.0
-M: recvonly
-C: 2
-L: p:20
-X-Osmo-IGN: C
-
-v=0
-c=IN IP4 123.12.12.123
-m=audio 5904 RTP/AVP 97
-a=rtpmap:97 GSM-EFR/8000
-a=ptime:40
-----

doc/manuals/chapters/overview.adoc

@@ -1,100 +0,0 @@
-[[overview]]
-== Overview
-
-This manual should help you getting started with OsmoMGW. It will cover
-aspects of configuring and running the media gateway.
-
-[[intro_overview]]
-=== About OsmoMGW
-
-OsmoMGW is the Osmocom implementation of a media gateway to handle user
-plane (voice) traffic in cellular networks. It can connect and optionally
-transcode RTP voice streams between different network elements such as BTSs
-and external entities like SIP. It is typically co-located with both OsmoBSC
-and OsmoMSC and controlled by them via MGCP, the Media Gateway Control
-Protocol.
-
-[[fig-bsc]]
-.OsmoMGW used with OsmoBSC
-[graphviz]
-----
-digraph G {
-    rankdir = LR;
-    OsmoBTS -> OsmoBSC [label="Abis/IP"];
-    OsmoBSC -> OsmoMSC [label="3GPP AoIP"];
-    OsmoBSC -> OsmoMGW [label="MGCP"];
-    OsmoBTS -> OsmoMGW [label="RTP",dir=both];
-    OsmoMGW -> OsmoMSC [label="RTP",dir=both];
-    {rank=same OsmoBSC OsmoMGW}
-    OsmoMGW [color=red];
-}
-----
-
-[[fig-msc]]
-.OsmoMGW used with OsmoMSC
-[graphviz]
-----
-digraph G {
-    rankdir = LR;
-    BTS -> BSC [label="Abis"];
-    BSC -> OsmoMSC [label="3GPP AoIP"];
-    OsmoMSC -> OsmoMGW [label="MGCP"];
-    BSC -> OsmoMGW [label="RTP",dir=both];
-    OsmoMSC -> OsmoSIP [label="MNCC"];
-    OsmoSIP -> PBX [label="SIP Trunk"];
-    OsmoMGW -> PBX [label="RTP",dir=both];
-    {rank=same OsmoMSC OsmoMGW}
-    OsmoSIP [label="osmo-sip-connector"];
-    OsmoMGW [color=red];
-
-    hNodeB -> OsmoHNBGW [label="Iuh"];
-    OsmoHNBGW -> OsmoMSC [label="IuCS"];
-    hNodeB -> OsmoMGW [label="RTP",dir=both];
-}
-----
-
-=== Software Components
-
-OsmoMGW contains a variety of different software components, which we’ll
-quickly describe in this section.
-
-==== MGCP Implementation
-
-OsmoMGW brings its own MGCP implementation through which OsmoMGW is
-controlled.
-
-The commands implemented are CRCX, MDCX, DLCX and RSIP. The command AUEP is
-implemented as a stub and will simply respond with OK.
-
-==== RTP implementation
-
-Support for IuUP which is used in 3G cells is quite lacking at the moment.
-3G<->3G and 2G<->2G calls should work, but 3G<->2G does not.
-
-==== Audio transcoder
-
-Transcoding is currently not supported in OsmoMGW.
-
-=== Limitations
-
-Osmux is not yet supported in OsmoMGW.
-
-At the moment (July 2018), OsmoMGW only implements RTP proxy / RTP bridge
-type endpoints, to each of which two RTP connections can be established.
-We are planning to add endpoint types for:
-
-- classic E1/T1 timeslots (64kBps alaw/ulaw)
-- classic E1/T1 16k sub-slots with TRAU frames for classic BTS support
-- announcement/playout end-points
-- conference endpoints
-
-=== Additional resources
-
-You can find the OsmoMGW issue tracker and wiki online at
-
-- https://osmocom.org/projects/osmomgw
-- https://osmocom.org/projects/osmomgw/wiki
-
-RFC 3435 for MGCP is located at
-
-- https://tools.ietf.org/html/rfc3435

doc/manuals/chapters/running.adoc

@@ -1,25 +0,0 @@
-== Running OsmoMGW
-
-The OsmoMGW executable (`osmo-mgw`) offers the following command-line
-arguments:
-
-=== SYNOPSIS
-
-*osmo-mgw* [-h|-V] [-D] [-c 'CONFIGFILE'] [-s]
-
-=== OPTIONS
-
-*-h, --help*::
-	Print a short help message about the supported options
-*-V, --version*::
-	Print the compile-time version number of the OsmoBTS program
-*-D, --daemonize*::
-	Fork the process as a daemon into background.
-*-c, --config-file 'CONFIGFILE'*::
-	Specify the file and path name of the configuration file to be
-	used. If none is specified, use `osmo-mgw.cfg` in the current
-	working directory.
-*-s, --disable-color*::
-	Disable colors for logging to stderr. This has mostly been
-	deprecated by VTY based logging configuration, see <<logging>>
-	for more information.

doc/manuals/osmomgw-usermanual-docinfo.xml

@@ -1,47 +0,0 @@
-<revhistory>
-  <revision>
-    <revnumber>1</revnumber>
-    <date>July 24th, 2018</date>
-    <authorinitials>DW</authorinitials>
-    <revremark>
-      Initial version
-    </revremark>
-  </revision>
-</revhistory>
-
-<authorgroup>
-  <author>
-    <firstname>Daniel</firstname>
-    <surname>Willmann</surname>
-    <email>dwillmann@sysmocom.de</email>
-    <authorinitials>DW</authorinitials>
-    <affiliation>
-      <shortaffil>sysmocom</shortaffil>
-      <orgname>sysmocom - s.f.m.c. GmbH</orgname>
-    </affiliation>
-  </author>
-</authorgroup>
-
-<copyright>
-  <year>2018</year>
-  <holder>sysmocom - s.f.m.c. GmbH</holder>
-</copyright>
-
-<legalnotice>
-  <para>
-	Permission is granted to copy, distribute and/or modify this
-	document under the terms of the GNU Free Documentation License,
-	Version 1.3 or any later version published by the Free Software
-	Foundation; with the Invariant Sections being just 'Foreword',
-	'Acknowledgements' and 'Preface', with no Front-Cover Texts,
-	and no Back-Cover Texts.  A copy of the license is included in
-	the section entitled "GNU Free Documentation License".
-  </para>
-  <para>
-	The Asciidoc source code of this manual can be found at
-	<ulink url="http://git.osmocom.org/osmo-gsm-manuals/">
-		http://git.osmocom.org/osmo-gsm-manuals/
-	</ulink>
-  </para>
-</legalnotice>
-

doc/manuals/osmomgw-usermanual.adoc

@@ -1,33 +0,0 @@
-:gfdl-enabled:
-:program-name: OsmoMGW
-
-OsmoMGW User Manual
-====================
-Daniel Willmann <dwillmann@sysmocom.de>
-
-
-include::./common/chapters/preface.adoc[]
-
-include::{srcdir}/chapters/overview.adoc[]
-
-include::{srcdir}/chapters/running.adoc[]
-
-include::./common/chapters/vty.adoc[]
-
-include::./common/chapters/logging.adoc[]
-
-include::{srcdir}/chapters/configuration.adoc[]
-
-include::{srcdir}/chapters/mgcp_extensions.adoc[]
-
-//include::{srcdir}/chapters/counters.adoc[]
-
-include::./common/chapters/port_numbers.adoc[]
-
-include::./common/chapters/bibliography.adoc[]
-
-include::./common/chapters/glossary.adoc[]
-
-include::./common/chapters/gfdl.adoc[]
-
-

doc/manuals/osmomgw-vty-reference.xml

@@ -1,38 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-  ex:ts=2:sw=42sts=2:et
-  -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
--->
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN"
-"http://docbook.org/xml/5.0/dtd/docbook.dtd" [
-<!ENTITY chapter-vty      SYSTEM      "./common/chapters/vty.xml" >
-<!ENTITY sections-vty     SYSTEM      "generated/docbook_vty.xml"  >
-]>
-
-<book>
-  <info>
-    <revhistory>
-        <revision>
-            <revnumber>v1</revnumber>
-            <date>12th December 2017</date>
-            <authorinitials>pm</authorinitials>
-            <revremark>Initial</revremark>
-        </revision>
-    </revhistory>
-
-    <title>OsmoMGW VTY Reference</title>
-
-    <copyright>
-      <year>2017</year>
-    </copyright>
-
-    <legalnotice>
-      <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved.
-      </para>
-    </legalnotice>
-  </info>
-
-  <!-- Main chapters-->
-  &chapter-vty;
-</book>
-

doc/manuals/vty/mgw_vty_additions.xml

@@ -1,2 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
-</vtydoc>

include/Makefile.am

@@ -1,13 +0,0 @@
-SUBDIRS = \
-	osmocom \
-	$(NULL)
-
-nobase_include_HEADERS = \
-	osmocom/mgcp_client/mgcp_client.h \
-	osmocom/mgcp_client/mgcp_client_fsm.h \
-	osmocom/mgcp_client/mgcp_common.h \
-	osmocom/mgcp/mgcp.h \
-	osmocom/mgcp/mgcp_common.h \
-	osmocom/mgcp/mgcp_internal.h \
-	osmocom/mgcp/osmux.h \
-	$(NULL)

include/osmocom/Makefile.am

@@ -1,4 +0,0 @@
-SUBDIRS = \
-	mgcp_client \
-	mgcp \
-	$(NULL)

include/osmocom/mgcp/Makefile.am

@@ -1,10 +0,0 @@
-noinst_HEADERS = \
-	vty.h \
-	mgcp_msg.h \
-	mgcp_conn.h \
-	mgcp_stat.h \
-	mgcp_endp.h \
-	mgcp_sdp.h \
-	mgcp_codec.h \
-	debug.h \
-	$(NULL)

include/osmocom/mgcp/mgcp_codec.h

@@ -1,7 +0,0 @@
-#pragma once
-
-void mgcp_codec_summary(struct mgcp_conn_rtp *conn);
-void mgcp_codec_reset_all(struct mgcp_conn_rtp *conn);
-int mgcp_codec_add(struct mgcp_conn_rtp *conn, int payload_type, const char *audio_name);
-int mgcp_codec_decide(struct mgcp_conn_rtp *conn);
-int mgcp_codec_pt_translate(struct mgcp_conn_rtp *conn_src, struct mgcp_conn_rtp *conn_dst, int payload_type);

include/osmocom/mgcp/mgcp_common.h

@@ -1,100 +0,0 @@
-/* MGCP common implementations.
- * These are used in libosmo-mgcp as well as libosmo-mgcp-client.
- * To avoid interdependency, these are implemented in .h file only. */
-
-/*
- * (C) 2017 by sysmocom s.f.m.c. GmbH <info@sysmocom.de>
- * (C) 2009-2012 by Holger Hans Peter Freyther <zecke@selfish.org>
- * (C) 2009-2012 by On-Waves
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Affero General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU Affero General Public License for more details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/* Two copies of this file are kept in osmocom/mgcp/ and osmocom/mgcp_client/.
- * Since both are by definition identical, use the old header exclusion ifdefs
- * instead of '#pragma once' to avoid including both of these files.
- * Though at the time of writing there are no such users, this allows including
- * both libosmo-mgcp and libosmo-mgcp-client headers in the same file. */
-#ifndef OSMO_MGCP_COMMON_H
-#define OSMO_MGCP_COMMON_H
-
-#include <string.h>
-#include <errno.h>
-
-#include <osmocom/core/msgb.h>
-#include <osmocom/core/logging.h>
-
-#define for_each_non_empty_line(line, save)			\
-	for (line = strtok_r(NULL, "\r\n", &save); line;	\
-	     line = strtok_r(NULL, "\r\n", &save))
-
-enum mgcp_connection_mode {
-	MGCP_CONN_NONE = 0,
-	MGCP_CONN_RECV_ONLY = 1,
-	MGCP_CONN_SEND_ONLY = 2,
-	MGCP_CONN_RECV_SEND = MGCP_CONN_RECV_ONLY | MGCP_CONN_SEND_ONLY,
-	MGCP_CONN_LOOPBACK  = 4 | MGCP_CONN_RECV_SEND,
-};
-
-#define MGCP_X_OSMO_IGN_HEADER "X-Osmo-IGN:"
-
-/* Values should be bitwise-OR-able */
-enum mgcp_x_osmo_ign {
-	MGCP_X_OSMO_IGN_NONE = 0,
-	MGCP_X_OSMO_IGN_CALLID = 1,
-};
-
-/* Ensure that the msg->l2h is NUL terminated. */
-static inline int mgcp_msg_terminate_nul(struct msgb *msg)
-{
-	unsigned char *tail = msg->l2h + msgb_l2len(msg); /* char after l2 data */
-	if (tail[-1] == '\0')
-		/* nothing to do */;
-	else if (msgb_tailroom(msg) > 0)
-		tail[0] = '\0';
-	else if (tail[-1] == '\r' || tail[-1] == '\n')
-		tail[-1] = '\0';
-	else {
-		LOGP(DLMGCP, LOGL_ERROR, "Cannot NUL terminate MGCP message: "
-		     "Length: %d, Buffer size: %d\n",
-		     msgb_l2len(msg), msg->data_len);
-		return -ENOTSUP;
-	}
-	return 0;
-}
-
-/* Maximum length of the comment field */
-#define MGCP_COMMENT_MAXLEN 256
-
-/* Maximum allowed String length of Connection Identifiers as per spec
- * (see also RFC3435 2.1.3.2 Names of Connections), plus one for '\0'. */
-#define MGCP_CONN_ID_MAXLEN 32+1
-
-/* Deprecated: old name of MGCP_CONN_ID_MAXLEN. */
-#define MGCP_CONN_ID_LENGTH MGCP_CONN_ID_MAXLEN
-
-/* String length of Endpoint Identifiers.
-/  (see also RFC3435 section 3.2.1.3) */
-#define MGCP_ENDPOINT_MAXLEN (255*2+1+1)
-
-/* A prefix to denote the virtual trunk (RTP on both ends) */
-#define MGCP_ENDPOINT_PREFIX_VIRTUAL_TRUNK "rtpbridge/"
-
-/* Maximal number of payload types / codecs that can be negotiated via SDP at
- * at once. */
-#define MGCP_MAX_CODECS 10
-
-#endif

include/osmocom/mgcp/mgcp_conn.h

@@ -1,80 +0,0 @@
-/* Message connection list handling */
-
-/*
- * (C) 2017 by sysmocom s.f.m.c. GmbH <info@sysmocom.de>
- * All Rights Reserved
- *
- * Author: Philipp Maier
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Affero General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU Affero General Public License for more details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#pragma once
-
-#include <osmocom/mgcp/mgcp_internal.h>
-#include <osmocom/core/linuxlist.h>
-#include <osmocom/core/rate_ctr.h>
-#include <inttypes.h>
-
-/* RTP connection related counters */
-enum {
-	IN_STREAM_ERR_TSTMP_CTR,
-	OUT_STREAM_ERR_TSTMP_CTR,
-        RTP_PACKETS_RX_CTR,
-        RTP_OCTETS_RX_CTR,
-        RTP_PACKETS_TX_CTR,
-        RTP_OCTETS_TX_CTR,
-        RTP_DROPPED_PACKETS_CTR,
-        RTP_NUM_CONNECTIONS,
-};
-
-/* RTP per-connection statistics. Instances of the corresponding rate counter group
- * exist for the lifetime of an RTP connection.
- * Must be kept in sync with all_rtp_conn_rate_ctr_desc below */
-static const struct rate_ctr_desc mgcp_conn_rate_ctr_desc[] = {
-	[IN_STREAM_ERR_TSTMP_CTR] = {"stream_err_tstmp:in", "Inbound rtp-stream timestamp errors."},
-	[OUT_STREAM_ERR_TSTMP_CTR] = {"stream_err_tstmp:out", "Outbound rtp-stream timestamp errors."},
-	[RTP_PACKETS_RX_CTR] = {"rtp:packets_rx", "Inbound rtp packets."},
-	[RTP_OCTETS_RX_CTR] = {"rtp:octets_rx", "Inbound rtp octets."},
-	[RTP_PACKETS_TX_CTR] = {"rtp:packets_tx", "Outbound rtp packets."},
-	[RTP_OCTETS_TX_CTR] = {"rtp:octets_tx", "Outbound rtp octets."},
-	[RTP_DROPPED_PACKETS_CTR] = {"rtp:dropped", "dropped rtp packets."}
-};
-
-/* Aggregated RTP connection stats. These are updated when an RTP connection is freed.
- * Must be kept in sync with mgcp_conn_rate_ctr_desc above */
-static const struct rate_ctr_desc all_rtp_conn_rate_ctr_desc[] = {
-	[IN_STREAM_ERR_TSTMP_CTR] = {"all_rtp:err_tstmp_in", "Total inbound rtp-stream timestamp errors."},
-	[OUT_STREAM_ERR_TSTMP_CTR] = {"all_rtp:err_tstmp_out", "Total outbound rtp-stream timestamp errors."},
-	[RTP_PACKETS_RX_CTR] = {"all_rtp:packets_rx", "Total inbound rtp packets."},
-	[RTP_OCTETS_RX_CTR] = {"all_rtp:octets_rx", "Total inbound rtp octets."},
-	[RTP_PACKETS_TX_CTR] = {"all_rtp:packets_tx", "Total outbound rtp packets."},
-	[RTP_OCTETS_TX_CTR] = {"all_rtp:octets_tx", "Total outbound rtp octets."},
-	[RTP_DROPPED_PACKETS_CTR] = {"all_rtp:dropped", "Total dropped rtp packets."},
-
-	/* This last counter does not exist in per-connection stats, only here. */
-	[RTP_NUM_CONNECTIONS] = {"all_rtp:num_closed_conns", "Total number of rtp connections closed."}
-};
-
-struct mgcp_conn *mgcp_conn_alloc(void *ctx, struct mgcp_endpoint *endp,
-				  enum mgcp_conn_type type, char *name);
-struct mgcp_conn *mgcp_conn_get(struct mgcp_endpoint *endp, const char *id);
-struct mgcp_conn_rtp *mgcp_conn_get_rtp(struct mgcp_endpoint *endp,
-					const char *id);
-void mgcp_conn_free(struct mgcp_endpoint *endp, const char *id);
-void mgcp_conn_free_oldest(struct mgcp_endpoint *endp);
-void mgcp_conn_free_all(struct mgcp_endpoint *endp);
-char *mgcp_conn_dump(struct mgcp_conn *conn);
-struct mgcp_conn *mgcp_find_dst_conn(struct mgcp_conn *conn);

include/osmocom/mgcp/mgcp_endp.h

@@ -1,102 +0,0 @@
-/* Endpoint types */
-
-/*
- * (C) 2017 by sysmocom s.f.m.c. GmbH <info@sysmocom.de>
- * All Rights Reserved
- *
- * Author: Philipp Maier
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Affero General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU Affero General Public License for more details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#pragma once
-
-struct sockaddr_in;
-struct mgcp_conn;
-struct mgcp_endpoint;
-
-/* Callback type for RTP dispatcher functions
-   (e.g mgcp_dispatch_rtp_bridge_cb, see below) */
-typedef int (*mgcp_dispatch_rtp_cb) (int proto, struct sockaddr_in *addr,
-				     char *buf, unsigned int buf_size,
-				     struct mgcp_conn *conn);
-
-/* Callback type for endpoint specific cleanup actions. This function
- * is automatically executed when a connection is freed (see mgcp_conn_free()
- * in mgcp_conn.c). Depending on the type of the endpoint there may be endpoint
- * specific things to take care of once a connection has been removed. */
-typedef void (*mgcp_cleanup_cp) (struct mgcp_endpoint *endp,
-				 struct mgcp_conn *conn);
-
-/*! MGCP endpoint properties */
-struct mgcp_endpoint_type {
-	/*! maximum number of connections */
-	int max_conns;
-
-	/*! callback that defines how to dispatch incoming RTP data */
-	mgcp_dispatch_rtp_cb dispatch_rtp_cb;
-
-	/*! callback that implements endpoint specific cleanup actions */
-	mgcp_cleanup_cp cleanup_cb;
-};
-
-/*! MGCP endpoint typeset */
-struct mgcp_endpoint_typeset {
-	struct mgcp_endpoint_type rtp;
-};
-
-/*! static MGCP endpoint typeset (pre-initalized, read-only) */
-extern const struct mgcp_endpoint_typeset ep_typeset;
-
-/*! MGCP endpoint model */
-struct mgcp_endpoint {
-
-	/*! Call identifier string (as supplied by the call agant) */
-	char *callid;
-
-	/*! Local connection options (see mgcp_internal.h) */
-	struct mgcp_lco local_options;
-
-	/*! List of struct mgcp_conn, of the connections active on this endpoint */
-	struct llist_head conns;
-
-	/*! Backpointer to the MGW configuration */
-	struct mgcp_config *cfg;
-
-	/*! Backpointer to the Trunk specific configuration */
-	struct mgcp_trunk_config *tcfg;
-
-	/*! Endpoint properties (see above) */
-	const struct mgcp_endpoint_type *type;
-
-	/*! Last MGCP transmission (in case re-transmission is required) */
-	char *last_trans;
-
-	/*! Last MGCP response (in case re-transmission is required) */
-	char *last_response;
-
-	/*! Memorize if this endpoint was choosen by the MGW (wildcarded, true)
-	 *   or if the user has choosen the particular endpoint explicitly. */
-	bool wildcarded_req;
-
-	/*! MGCP_X_OSMO_IGN_* flags from 'X-Osmo-IGN:' header */
-	uint32_t x_osmo_ign;
-};
-
-/*! Extract endpoint number for a given endpoint */
-#define ENDPOINT_NUMBER(endp) abs((int)(endp - endp->tcfg->endpoints))
-
-void mgcp_endp_release(struct mgcp_endpoint *endp);
-

include/osmocom/mgcp/mgcp_internal.h

@@ -1,336 +0,0 @@
-/* MGCP Private Data */
-
-/*
- * (C) 2009-2012 by Holger Hans Peter Freyther <zecke@selfish.org>
- * (C) 2009-2012 by On-Waves
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Affero General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU Affero General Public License for more details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#pragma once
-
-#include <string.h>
-#include <inttypes.h>
-#include <osmocom/core/select.h>
-#include <osmocom/mgcp/mgcp.h>
-#include <osmocom/core/linuxlist.h>
-#include <osmocom/core/counter.h>
-#include <osmocom/core/rate_ctr.h>
-
-#define CI_UNUSED 0
-
-/* FIXME: This this is only needed to compile the currently
- * broken OSMUX support. Remove when fixed */
-#define CONN_ID_BTS "0"
-#define CONN_ID_NET "1"
-
-enum mgcp_trunk_type {
-	MGCP_TRUNK_VIRTUAL,
-	MGCP_TRUNK_E1,
-};
-
-struct mgcp_rtp_stream_state {
-	uint32_t ssrc;
-	uint16_t last_seq;
-	uint32_t last_timestamp;
-	struct rate_ctr *err_ts_ctr;
-	int32_t last_tsdelta;
-	uint32_t last_arrival_time;
-};
-
-struct mgcp_rtp_state {
-	/* has this state structure been initialized? */
-	int initialized;
-
-	struct {
-		/* are we patching the SSRC value? */
-		int patch_ssrc;
-		/* original SSRC (to which we shall patch any different SSRC) */
-		uint32_t orig_ssrc;
-		/* offset to apply on the sequence number */
-		int seq_offset;
-		/* offset to apply on the timestamp number */
-		int32_t timestamp_offset;
-	} patch;
-
-	/* duration of a packet (FIXME: in which unit?) */
-	uint32_t packet_duration;
-
-	struct mgcp_rtp_stream_state in_stream;
-	struct mgcp_rtp_stream_state out_stream;
-
-	/* jitter and packet loss calculation */
-	struct {
-		int initialized;
-		uint16_t base_seq;
-		uint16_t max_seq;
-		uint32_t ssrc;
-		uint32_t jitter;
-		int32_t transit;
-		int cycles;
-	} stats;
-
-	bool patched_first_rtp_payload; /* FIXME: drop this, see OS#2459 */
-};
-
-struct mgcp_rtp_codec {
-	uint32_t rate;
-	int channels;
-	uint32_t frame_duration_num;
-	uint32_t frame_duration_den;
-
-	int payload_type;
-	char *audio_name;
-	char *subtype_name;
-};
-
-/* 'mgcp_rtp_end': basically a wrapper around the RTP+RTCP ports */
-struct mgcp_rtp_end {
-	/* local IP address of the RTP socket */
-	struct in_addr addr;
-
-	/* in network byte order */
-	int rtp_port, rtcp_port;
-
-	/* currently selected audio codec */
-	struct mgcp_rtp_codec *codec;
-
-	/* array with assigned audio codecs to choose from (SDP) */
-	struct mgcp_rtp_codec codecs[MGCP_MAX_CODECS];
-
-	/* number of assigned audio codecs (SDP) */
-	unsigned int codecs_assigned;
-
-	/* per endpoint data */
-	int  frames_per_packet;
-	uint32_t packet_duration_ms;
-	int maximum_packet_time; /* -1: not set */
-	char *fmtp_extra;
-	/* are we transmitting packets (1) or dropping (0) outbound packets */
-	int output_enabled;
-	/* FIXME: This parameter can be set + printed, but is nowhere used! */
-	int force_output_ptime;
-
-	/* RTP patching */
-	int force_constant_ssrc; /* -1: always, 0: don't, 1: once */
-	/* should we perform align_rtp_timestamp_offset() (1) or not (0) */
-	int force_aligned_timing;
-	bool rfc5993_hr_convert;
-	bool amr_oa_bwe_convert;
-
-	/* Each end has a separate socket for RTP and RTCP */
-	struct osmo_fd rtp;
-	struct osmo_fd rtcp;
-
-	/* local UDP port number of the RTP socket; RTCP is +1 */
-	int local_port;
-};
-
-struct mgcp_rtp_tap {
-	/* is this tap active (1) or not (0) */
-	int enabled;
-	/* IP/port to which we're forwarding the tapped data */
-	struct sockaddr_in forward;
-};
-
-struct mgcp_lco {
-	char *string;
-	char *codec;
-	int pkt_period_min; /* time in ms */
-	int pkt_period_max; /* time in ms */
-};
-
-/* Specific rtp connection type (see struct mgcp_conn_rtp) */
-enum mgcp_conn_rtp_type {
-	MGCP_RTP_DEFAULT	= 0,
-	MGCP_OSMUX_BSC,
-	MGCP_OSMUX_BSC_NAT,
-};
-
-#include <osmocom/mgcp/osmux.h>
-struct mgcp_conn;
-
-/* MGCP connection (RTP) */
-struct mgcp_conn_rtp {
-
-	/* Backpointer to conn struct */
-	struct mgcp_conn *conn;
-
-	/* Specific connection type */
-	enum mgcp_conn_rtp_type type;
-
-	/* Port status */
-	struct mgcp_rtp_end end;
-
-	/* Sequence bits */
-	struct mgcp_rtp_state state;
-
-	/* taps for the rtp connection; one per direction */
-	struct mgcp_rtp_tap tap_in;
-	struct mgcp_rtp_tap tap_out;
-
-	/* Osmux states (optional) */
-	struct {
-		/* Osmux state: disabled, activating, active */
-		enum osmux_state state;
-		/* Allocated Osmux circuit ID for this endpoint */
-		int allocated_cid;
-		/* Used Osmux circuit ID for this endpoint */
-		uint8_t cid;
-		/* handle to batch messages */
-		struct osmux_in_handle *in;
-		/* handle to unbatch messages */
-		struct osmux_out_handle out;
-		/* statistics */
-		struct {
-			uint32_t chunks;
-			uint32_t octets;
-		} stats;
-	} osmux;
-
-	struct rate_ctr_group *rate_ctr_group;
-};
-
-/*! Connection type, specifies which member of the union "u" in mgcp_conn
- *  contains a useful connection description (currently only RTP) */
-enum mgcp_conn_type {
-	MGCP_CONN_TYPE_RTP,
-};
-
-/*! MGCP connection (untyped) */
-struct mgcp_conn {
-	/*! list head */
-	struct llist_head entry;
-
-	/*! Backpointer to the endpoint where the conn belongs to */
-	struct mgcp_endpoint *endp;
-
-	/*! type of the connection (union) */
-	enum mgcp_conn_type type;
-
-	/*! mode of the connection */
-	enum mgcp_connection_mode mode;
-
-	/*! copy of the mode to restore the original setting (VTY) */
-	enum mgcp_connection_mode mode_orig;
-
-	/*! connection id to identify the connection */
-	char id[MGCP_CONN_ID_MAXLEN];
-
-	/*! human readable name (vty, logging) */
-	char name[256];
-
-	/*! activity tracker (for cleaning up inactive connections) */
-	struct osmo_timer_list watchdog;
-
-	/*! union with connection description */
-	union {
-		struct mgcp_conn_rtp rtp;
-	} u;
-
-	/*! pointer to optional private data */
-	void *priv;
-};
-
-#include <osmocom/mgcp/mgcp_conn.h>
-
-struct mgcp_endpoint_type;
-
-
-
-
-
-/**
- * Internal structure while parsing a request
- */
-struct mgcp_parse_data {
-	struct mgcp_config *cfg;
-	struct mgcp_endpoint *endp;
-	char *trans;
-	char *save;
-};
-
-int mgcp_send(struct mgcp_endpoint *endp, int is_rtp, struct sockaddr_in *addr,
-	      char *buf, int rc, struct mgcp_conn_rtp *conn_src,
-	      struct mgcp_conn_rtp *conn_dst);
-int mgcp_send_dummy(struct mgcp_endpoint *endp, struct mgcp_conn_rtp *conn);
-int mgcp_dispatch_rtp_bridge_cb(int proto, struct sockaddr_in *addr, char *buf,
-				unsigned int buf_size, struct mgcp_conn *conn);
-void mgcp_cleanup_rtp_bridge_cb(struct mgcp_endpoint *endp, struct mgcp_conn *conn);
-int mgcp_bind_net_rtp_port(struct mgcp_endpoint *endp, int rtp_port,
-			   struct mgcp_conn_rtp *conn);
-void mgcp_free_rtp_port(struct mgcp_rtp_end *end);
-
-/* For transcoding we need to manage an in and an output that are connected */
-static inline int endp_back_channel(int endpoint)
-{
-	return endpoint + 60;
-}
-
-struct mgcp_trunk_config *mgcp_trunk_alloc(struct mgcp_config *cfg, int index);
-struct mgcp_trunk_config *mgcp_trunk_num(struct mgcp_config *cfg, int index);
-
-char *get_lco_identifier(const char *options);
-int check_local_cx_options(void *ctx, const char *options);
-void mgcp_rtp_end_config(struct mgcp_endpoint *endp, int expect_ssrc_change,
-			 struct mgcp_rtp_end *rtp);
-uint32_t mgcp_rtp_packet_duration(struct mgcp_endpoint *endp,
-				  struct mgcp_rtp_end *rtp);
-
-/* payload processing default functions */
-int mgcp_rtp_processing_default(struct mgcp_endpoint *endp, struct mgcp_rtp_end *dst_end,
-				char *data, int *len, int buf_size);
-
-int mgcp_setup_rtp_processing_default(struct mgcp_endpoint *endp,
-				      struct mgcp_conn_rtp *conn_dst,
-				      struct mgcp_conn_rtp *conn_src);
-
-void mgcp_get_net_downlink_format_default(struct mgcp_endpoint *endp,
-					  int *payload_type,
-					  const char**audio_name,
-					  const char**fmtp_extra,
-					  struct mgcp_conn_rtp *conn);
-
-/* internal RTP Annex A counting */
-void mgcp_rtp_annex_count(struct mgcp_endpoint *endp, struct mgcp_rtp_state *state,
-			const uint16_t seq, const int32_t transit,
-			const uint32_t ssrc);
-
-int mgcp_set_ip_tos(int fd, int tos);
-
-enum {
-	MGCP_DEST_NET = 0,
-	MGCP_DEST_BTS,
-};
-
-
-#define MGCP_DUMMY_LOAD 0x23
-
-
-/**
- * SDP related information
- */
-/* Assume audio frame length of 20ms */
-#define DEFAULT_RTP_AUDIO_FRAME_DUR_NUM 20
-#define DEFAULT_RTP_AUDIO_FRAME_DUR_DEN 1000
-#define DEFAULT_RTP_AUDIO_PACKET_DURATION_MS 20
-#define DEFAULT_RTP_AUDIO_DEFAULT_RATE  8000
-#define DEFAULT_RTP_AUDIO_DEFAULT_CHANNELS 1
-
-#define PTYPE_UNDEFINED (-1)
-
-void mgcp_get_local_addr(char *addr, struct mgcp_conn_rtp *conn);
-void mgcp_conn_watchdog_kick(struct mgcp_conn *conn);

include/osmocom/mgcp/mgcp_msg.h

@@ -1,56 +0,0 @@
-/* A Media Gateway Control Protocol Media Gateway: RFC 3435 */
-/* Message parser/generator utilities */
-
-/*
- * (C) 2009-2012 by Holger Hans Peter Freyther <zecke@selfish.org>
- * (C) 2009-2012 by On-Waves
- * (C) 2017 by sysmocom s.f.m.c. GmbH <info@sysmocom.de>
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Affero General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU Affero General Public License for more details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#pragma once
-
-#include <stdint.h>
-
-struct mgcp_conn;
-struct mgcp_parse_data;
-struct mgcp_endpoint;
-
-void mgcp_disp_msg(unsigned char *message, unsigned int len, char *preamble);
-
-int mgcp_parse_conn_mode(const char *msg, struct mgcp_endpoint *endp,
-			 struct mgcp_conn *conn);
-
-int mgcp_parse_header(struct mgcp_parse_data *pdata, char *data);
-
-int mgcp_parse_osmux_cid(const char *line);
-
-int mgcp_check_param(const struct mgcp_endpoint *endp, const char *line);
-
-int mgcp_verify_call_id(struct mgcp_endpoint *endp, const char *callid);
-
-int mgcp_verify_ci(struct mgcp_endpoint *endp, const char *conn_id);
-
-char *mgcp_strline(char *str, char **saveptr);
-
-#define for_each_line(line, save)\
-	for (line = mgcp_strline(NULL, &save); line;\
-	     line = mgcp_strline(NULL, &save))
-
-#define for_each_non_empty_line(line, save)\
-	for (line = strtok_r(NULL, "\r\n", &save); line;\
-	     line = strtok_r(NULL, "\r\n", &save))

include/osmocom/mgcp/osmux.h

@@ -1,37 +0,0 @@
-#pragma once
-
-
-#include <osmocom/netif/osmux.h>
-struct mgcp_conn_rtp;
-
-#define OSMUX_PORT	1984
-
-enum {
-	OSMUX_ROLE_BSC = 0,
-	OSMUX_ROLE_BSC_NAT,
-};
-
-int osmux_init(int role, struct mgcp_config *cfg);
-int osmux_enable_conn(struct mgcp_endpoint *endp, struct mgcp_conn_rtp *conn,
-		      struct in_addr *addr, uint16_t port);
-void osmux_disable_conn(struct mgcp_conn_rtp *conn);
-void osmux_allocate_cid(struct mgcp_conn_rtp *conn);
-void osmux_release_cid(struct mgcp_conn_rtp *conn);
-int osmux_xfrm_to_osmux(char *buf, int buf_len, struct mgcp_conn_rtp *conn);
-int osmux_send_dummy(struct mgcp_endpoint *endp, struct mgcp_conn_rtp *conn);
-int osmux_get_cid(void);
-void osmux_put_cid(uint8_t osmux_cid);
-int osmux_used_cid(void);
-
-enum osmux_state {
-	OSMUX_STATE_DISABLED = 0, /* Osmux not being currently used by endp */
-	OSMUX_STATE_NEGOTIATING,  /* Osmux was locally requested in MGCP CRCX */
-	OSMUX_STATE_ACTIVATING,   /* Osmux was accepted in MGCP CRCX ACK. It can now be enabled by \ref osmux_enable_endpoint. */
-	OSMUX_STATE_ENABLED,	  /* Osmux was initialized by \ref osmux_enable_endpoint and can process frames */
-};
-
-enum osmux_usage {
-	OSMUX_USAGE_OFF = 0,
-	OSMUX_USAGE_ON = 1,
-	OSMUX_USAGE_ONLY = 2,
-};

include/osmocom/mgcp/vty.h

@@ -1,8 +0,0 @@
-#pragma once
-
-#include <osmocom/vty/command.h>
-
-enum mgcp_vty_node {
-	MGCP_NODE = _LAST_OSMOVTY_NODE + 1,
-	TRUNK_NODE,
-};

include/osmocom/mgcp_client/Makefile.am

@@ -1,13 +0,0 @@
-BUILT_SOURCES = \
-	mgcp_common.h \
-	$(NULL)
-
-noinst_HEADERS = \
-	mgcp_client_internal.h \
-	$(NULL)
-
-mgcp_common.h: $(top_srcdir)/include/osmocom/mgcp/mgcp_common.h
-	echo -e "/*\n\n   DO NOT EDIT THIS FILE!\n   THIS IS OVERWRITTEN DURING BUILD\n   This is an automatic copy of <osmocom/mgcp/mgcp_common.h>\n\n */" > mgcp_common.h
-	cat $(top_srcdir)/include/osmocom/mgcp/mgcp_common.h >> mgcp_common.h
-
-CLEANFILES = mgcp_common.h

include/osmocom/mgcp_client/mgcp_client.h

@@ -1,154 +0,0 @@
-#pragma once
-
-#include <stdint.h>
-#include <arpa/inet.h>
-
-#include <osmocom/mgcp_client/mgcp_common.h>
-
-/* See also: RFC 3435, chapter 3.5 Transmission over UDP */
-#define MGCP_CLIENT_LOCAL_ADDR_DEFAULT "0.0.0.0"
-#define MGCP_CLIENT_LOCAL_PORT_DEFAULT 2727
-#define MGCP_CLIENT_REMOTE_ADDR_DEFAULT "127.0.0.1"
-#define MGCP_CLIENT_REMOTE_PORT_DEFAULT 2427
-
-#define MGCP_CLIENT_MGW_STR "Configure MGCP connection to Media Gateway\n"
-
-struct msgb;
-struct vty;
-struct mgcp_client;
-
-struct mgcp_client_conf {
-	const char *local_addr;
-	int local_port;
-	const char *remote_addr;
-	int remote_port;
-
-	/* By default, we are always addressing the MGW with e.g. 'rtpbridge/123@mgw'.
-	 * If this is nonempty, the contained name will be used instead of 'mgw'. */
-	char endpoint_domain_name[MGCP_ENDPOINT_MAXLEN];
-};
-
-typedef unsigned int mgcp_trans_id_t;
-
-/*! Enumeration of the codec types that mgcp_client is able to handle. */
-enum mgcp_codecs {
-	CODEC_PCMU_8000_1 = 0,
-	CODEC_GSM_8000_1 = 3,
-	CODEC_PCMA_8000_1 = 8,
-	CODEC_G729_8000_1 = 18,
-	CODEC_GSMEFR_8000_1 = 110,
-	CODEC_GSMHR_8000_1 = 111,	
-	CODEC_AMR_8000_1 = 112,
-	CODEC_AMRWB_16000_1 = 113,
-};
-/* Note: when new codec types are added, the corresponding value strings
- * in mgcp_client.c (codec_table) must be updated as well. Enumerations
- * in enum mgcp_codecs must correspond to a valid payload type. However,
- * this is an internal assumption that is made to avoid lookup tables.
- * The API-User should not rely on this coincidence! */
-
-/*! Structure to build a payload type map to allow the defiition custom payload
- *  types. */
-struct ptmap {
-	/*! codec for which a payload type number should be defined */
-	enum mgcp_codecs codec;
-
-	/*! payload type number (96-127) */
-	unsigned int pt;
-};
-
-struct mgcp_response_head {
-	int response_code;
-	mgcp_trans_id_t trans_id;
-	char comment[MGCP_COMMENT_MAXLEN];
-	char conn_id[MGCP_CONN_ID_MAXLEN];
-	char endpoint[MGCP_ENDPOINT_MAXLEN];
-};
-
-struct mgcp_response {
-	char *body;
-	struct mgcp_response_head head;
-	uint16_t audio_port;
-	char audio_ip[INET_ADDRSTRLEN];
-	unsigned int ptime;
-	enum mgcp_codecs codecs[MGCP_MAX_CODECS];
-	unsigned int codecs_len;
-	struct ptmap ptmap[MGCP_MAX_CODECS];
-	unsigned int ptmap_len;	
-};
-
-enum mgcp_verb {
-	MGCP_VERB_CRCX,
-	MGCP_VERB_MDCX,
-	MGCP_VERB_DLCX,
-	MGCP_VERB_AUEP,
-	MGCP_VERB_RSIP,
-};
-
-#define MGCP_MSG_PRESENCE_ENDPOINT	0x0001
-#define MGCP_MSG_PRESENCE_CALL_ID	0x0002
-#define MGCP_MSG_PRESENCE_CONN_ID	0x0004
-#define MGCP_MSG_PRESENCE_AUDIO_IP	0x0008
-#define MGCP_MSG_PRESENCE_AUDIO_PORT	0x0010
-#define MGCP_MSG_PRESENCE_CONN_MODE	0x0020
-#define MGCP_MSG_PRESENCE_X_OSMO_IGN	0x8000
-
-struct mgcp_msg {
-	enum mgcp_verb verb;
-	/* See MGCP_MSG_PRESENCE_* constants */
-	uint32_t presence;
-	char endpoint[MGCP_ENDPOINT_MAXLEN];
-	unsigned int call_id;
-	char *conn_id;
-	uint16_t audio_port;
-	char *audio_ip;
-	enum mgcp_connection_mode conn_mode;
-	unsigned int ptime;
-	enum mgcp_codecs codecs[MGCP_MAX_CODECS];
-	unsigned int codecs_len;
-	struct ptmap ptmap[MGCP_MAX_CODECS];
-	unsigned int ptmap_len;
-	uint32_t x_osmo_ign;
-};
-
-void mgcp_client_conf_init(struct mgcp_client_conf *conf);
-void mgcp_client_vty_init(void *talloc_ctx, int node, struct mgcp_client_conf *conf);
-int mgcp_client_config_write(struct vty *vty, const char *indent);
-struct mgcp_client_conf *mgcp_client_conf_actual(struct mgcp_client *mgcp);
-
-struct mgcp_client *mgcp_client_init(void *ctx,
-				     struct mgcp_client_conf *conf);
-int mgcp_client_connect(struct mgcp_client *mgcp);
-
-const char *mgcp_client_remote_addr_str(struct mgcp_client *mgcp);
-uint16_t mgcp_client_remote_port(struct mgcp_client *mgcp);
-uint32_t mgcp_client_remote_addr_n(struct mgcp_client *mgcp);
-
-const char *mgcp_client_endpoint_domain(const struct mgcp_client *mgcp);
-const char *mgcp_client_rtpbridge_wildcard(const struct mgcp_client *mgcp);
-
-/* Invoked when an MGCP response is received or sending failed.  When the
- * response is passed as NULL, this indicates failure during transmission. */
-typedef void (* mgcp_response_cb_t )(struct mgcp_response *response, void *priv);
-int mgcp_response_parse_params(struct mgcp_response *r);
-
-int mgcp_client_tx(struct mgcp_client *mgcp, struct msgb *msg,
-		   mgcp_response_cb_t response_cb, void *priv);
-int mgcp_client_cancel(struct mgcp_client *mgcp, mgcp_trans_id_t trans_id);
-
-enum mgcp_connection_mode;
-
-struct msgb *mgcp_msg_gen(struct mgcp_client *mgcp, struct mgcp_msg *mgcp_msg);
-mgcp_trans_id_t mgcp_msg_trans_id(struct msgb *msg);
-
-extern const struct value_string mgcp_client_connection_mode_strs[];
-static inline const char *mgcp_client_cmode_name(enum mgcp_connection_mode mode)
-{
-	return get_value_string(mgcp_client_connection_mode_strs, mode);
-}
-
-enum mgcp_codecs map_str_to_codec(const char *str);
-unsigned int map_codec_to_pt(struct ptmap *ptmap, unsigned int ptmap_len,
-			     enum mgcp_codecs codec);
-enum mgcp_codecs map_pt_to_codec(struct ptmap *ptmap, unsigned int ptmap_len,
-				 unsigned int pt);

include/osmocom/mgcp_client/mgcp_client_fsm.h

@@ -1,57 +0,0 @@
-#pragma once
-
-#include <osmocom/mgcp_client/mgcp_common.h>
-#include <osmocom/mgcp_client/mgcp_client.h>
-#include <osmocom/gsm/protocol/gsm_04_08.h>
-
-/*! This struct organizes the connection infromation one connection side
- *  (either remote or local). It is used to pass parameters (local) to the FSM
- *  and get responses (remote) from the FSM as pointer attached to the FSM
- *  event.
- * 
- *  When modifiying a connection, the endpoint and call_id members may be left
- *  unpopulated. The call_id field is ignored in this case. If an endpoint
- *  identifier is supplied it is checked against the internal state to make
- *  sure it is correct. */
-struct mgcp_conn_peer {
-	/*! RTP connection IP-Address (optional, string e.g. "127.0.0.1") */
-	char addr[INET_ADDRSTRLEN];
-
-	/*! RTP connection IP-Port (optional)  */
-	uint16_t port;
-
-	/*! RTP endpoint */
-	char endpoint[MGCP_ENDPOINT_MAXLEN];
-
-	/*! CALL ID (unique per connection) */
-	unsigned int call_id;
-
-	/*! RTP packetization interval (optional) */
-	unsigned int ptime;
-
-	/*! RTP codec list (optional) */
-	enum mgcp_codecs codecs[MGCP_MAX_CODECS];
-
-	/*! Number of codecs in RTP codec list (optional) */
-	unsigned int codecs_len;
-
-	/*! RTP payload type map (optional, only needed when payload types are
-	 * used that differ from what IANA/3GPP defines) */
-	struct ptmap ptmap[MGCP_MAX_CODECS];
-
-	/*! RTP payload type map length (optional, only needed when payload
-	 * types are used that differ from what IANA/3GPP defines) */
-	unsigned int ptmap_len;
-
-	/*! If nonzero, send 'X-Osmo-IGN:' header. This is useful e.g. for SCCPlite MSCs where the MSC is
-	 * known to issue incoherent or unknown CallIDs / to issue CRCX commands with a different domain
-	 * name than the BSC. An OsmoMGW will then ignore these and not fail on mismatches. */
-	uint32_t x_osmo_ign;
-};
-
-struct osmo_fsm_inst *mgcp_conn_create(struct mgcp_client *mgcp, struct osmo_fsm_inst *parent_fi, uint32_t parent_term_evt,
-				       uint32_t parent_evt, struct mgcp_conn_peer *conn_peer);
-int mgcp_conn_modify(struct osmo_fsm_inst *fi, uint32_t parent_evt, struct mgcp_conn_peer *conn_peer);
-void mgcp_conn_delete(struct osmo_fsm_inst *fi);
-
-const char *mgcp_conn_get_ci(struct osmo_fsm_inst *fi);

include/osmocom/mgcp_client/mgcp_client_internal.h

@@ -1,35 +0,0 @@
-#pragma once
-
-#include <osmocom/core/write_queue.h>
-
-#define MSGB_CB_MGCP_TRANS_ID 0
-
-struct mgcp_client {
-	struct mgcp_client_conf actual;
-	uint32_t remote_addr;
-	struct osmo_wqueue wq;
-	mgcp_trans_id_t next_trans_id;
-	struct llist_head responses_pending;
-	struct llist_head inuse_endpoints;
-};
-
-struct mgcp_inuse_endpoint {
-	struct llist_head entry;
-	uint16_t id;
-};
-
-struct mgcp_response_pending {
-	struct llist_head entry;
-
-	mgcp_trans_id_t trans_id;
-	mgcp_response_cb_t response_cb;
-	void *priv;
-};
-
-int mgcp_client_rx(struct mgcp_client *mgcp, struct msgb *msg);
-
-struct mgcp_response_pending * mgcp_client_pending_add(
-					struct mgcp_client *mgcp,
-					mgcp_trans_id_t trans_id,
-					mgcp_response_cb_t response_cb,
-					void *priv);

libosmo-mgcp-client.pc.in

@@ -1,10 +0,0 @@
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: Osmocom Media Gateway Control Protocol Client library
-Description: C Utility Library
-Version: @VERSION@
-Libs: -L${libdir} -losmo-mgcp-client
-Cflags: -I${includedir}/

m4/README

@@ -1,3 +0,0 @@
-We want to avoid creating too many external build-time dependencies
-like this one to autoconf-archive.  This directory provides a local
-copy of required m4 rules.

m4/ax_check_compile_flag.m4

@@ -1,74 +0,0 @@
-# ===========================================================================
-#   http://www.gnu.org/software/autoconf-archive/ax_check_compile_flag.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_CHECK_COMPILE_FLAG(FLAG, [ACTION-SUCCESS], [ACTION-FAILURE], [EXTRA-FLAGS], [INPUT])
-#
-# DESCRIPTION
-#
-#   Check whether the given FLAG works with the current language's compiler
-#   or gives an error.  (Warnings, however, are ignored)
-#
-#   ACTION-SUCCESS/ACTION-FAILURE are shell commands to execute on
-#   success/failure.
-#
-#   If EXTRA-FLAGS is defined, it is added to the current language's default
-#   flags (e.g. CFLAGS) when the check is done.  The check is thus made with
-#   the flags: "CFLAGS EXTRA-FLAGS FLAG".  This can for example be used to
-#   force the compiler to issue an error when a bad flag is given.
-#
-#   INPUT gives an alternative input source to AC_COMPILE_IFELSE.
-#
-#   NOTE: Implementation based on AX_CFLAGS_GCC_OPTION. Please keep this
-#   macro in sync with AX_CHECK_{PREPROC,LINK}_FLAG.
-#
-# LICENSE
-#
-#   Copyright (c) 2008 Guido U. Draheim <guidod@gmx.de>
-#   Copyright (c) 2011 Maarten Bosmans <mkbosmans@gmail.com>
-#
-#   This program is free software: you can redistribute it and/or modify it
-#   under the terms of the GNU General Public License as published by the
-#   Free Software Foundation, either version 3 of the License, or (at your
-#   option) any later version.
-#
-#   This program is distributed in the hope that it will be useful, but
-#   WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-#   Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License along
-#   with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-#   As a special exception, the respective Autoconf Macro's copyright owner
-#   gives unlimited permission to copy, distribute and modify the configure
-#   scripts that are the output of Autoconf when processing the Macro. You
-#   need not follow the terms of the GNU General Public License when using
-#   or distributing such scripts, even though portions of the text of the
-#   Macro appear in them. The GNU General Public License (GPL) does govern
-#   all other use of the material that constitutes the Autoconf Macro.
-#
-#   This special exception to the GPL applies to versions of the Autoconf
-#   Macro released by the Autoconf Archive. When you make and distribute a
-#   modified version of the Autoconf Macro, you may extend this special
-#   exception to the GPL to apply to your modified version as well.
-
-#serial 4
-
-AC_DEFUN([AX_CHECK_COMPILE_FLAG],
-[AC_PREREQ(2.64)dnl for _AC_LANG_PREFIX and AS_VAR_IF
-AS_VAR_PUSHDEF([CACHEVAR],[ax_cv_check_[]_AC_LANG_ABBREV[]flags_$4_$1])dnl
-AC_CACHE_CHECK([whether _AC_LANG compiler accepts $1], CACHEVAR, [
-  ax_check_save_flags=$[]_AC_LANG_PREFIX[]FLAGS
-  _AC_LANG_PREFIX[]FLAGS="$[]_AC_LANG_PREFIX[]FLAGS $4 $1"
-  AC_COMPILE_IFELSE([m4_default([$5],[AC_LANG_PROGRAM()])],
-    [AS_VAR_SET(CACHEVAR,[yes])],
-    [AS_VAR_SET(CACHEVAR,[no])])
-  _AC_LANG_PREFIX[]FLAGS=$ax_check_save_flags])
-AS_VAR_IF(CACHEVAR,yes,
-  [m4_default([$2], :)],
-  [m4_default([$3], :)])
-AS_VAR_POPDEF([CACHEVAR])dnl
-])dnl AX_CHECK_COMPILE_FLAGS

openbsc/.gitignore

@@ -0,0 +1,94 @@
+*.o
+*.lo
+*.a
+.deps
+Makefile
+Makefile.in
+bscconfig.h
+bscconfig.h.in
+openbsc.pc
+src/osmo-nitb/osmo-nitb
+src/osmo-bsc_mgcp/osmo-bsc_mgcp
+src/osmo-bsc/osmo-bsc
+src/utils/meas_vis
+src/utils/osmo-meas-pcap2db
+src/utils/osmo-meas-udp2db
+src/utils/smpp_mirror
+*.*~
+*.sw?
+.libs
+*.pyc
+*.gcda
+*.gcno
+
+#configure
+aclocal.m4
+autom4te.cache/
+config.log
+config.status
+config.guess
+config.sub
+configure
+compile
+depcomp
+install-sh
+missing
+stamp-h1
+libtool
+ltmain.sh
+
+# git-version-gen magic
+.tarball-version
+.version
+
+
+# apps and app data
+hlr.sqlite3
+src/utils/bs11_config
+src/ipaccess/ipaccess-config
+src/ipaccess/abisip-find
+src/ipaccess/ipaccess-firmware
+src/ipaccess/ipaccess-proxy
+src/utils/isdnsync
+src/nat/bsc_nat
+src/gprs/osmo-sgsn
+src/gprs/osmo-gbproxy
+src/gprs/osmo-gtphub
+src/osmo-bsc_nat/osmo-bsc_nat
+src/osmo-cscn/osmo-cscn
+
+#tests
+tests/testsuite.dir
+tests/bsc-nat/bsc_nat_test
+tests/bsc-nat-trie/bsc_nat_trie_test
+tests/channel/channel_test
+tests/db/db_test
+tests/debug/debug_test
+tests/gsm0408/gsm0408_test
+tests/mgcp/mgcp_test
+tests/sccp/sccp_test
+tests/sms/sms_test
+tests/timer/timer_test
+tests/gprs/gprs_test
+tests/gbproxy/gbproxy_test
+tests/abis/abis_test
+tests/si/si_test
+tests/smpp/smpp_test
+tests/bsc/bsc_test
+tests/trau/trau_test
+tests/mgcp/mgcp_transcoding_test
+tests/sgsn/sgsn_test
+tests/subscr/subscr_test
+tests/oap/oap_test
+tests/gtphub/gtphub_test
+tests/mm_auth/mm_auth_test
+
+tests/atconfig
+tests/atlocal
+tests/package.m4
+tests/testsuite
+tests/testsuite.log
+
+src/openbsc.cfg*
+writtenconfig/
+gtphub_restart_count

openbsc/Makefile.am

@@ -0,0 +1,14 @@
+AUTOMAKE_OPTIONS = foreign dist-bzip2 1.6
+
+AM_CPPFLAGS = $(all_includes) -I$(top_srcdir)/include
+SUBDIRS = doc include src tests
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = openbsc.pc
+
+BUILT_SOURCES = $(top_srcdir)/.version
+EXTRA_DIST = git-version-gen osmoappdesc.py .version
+$(top_srcdir)/.version:
+	echo $(VERSION) > $@-t && mv $@-t $@
+dist-hook:
+	echo $(VERSION) > $(distdir)/.tarball-version

openbsc/README

@@ -0,0 +1,39 @@
+About OpenBSC
+=============
+
+OpenBSC started as a minimalistic all-in-one implementation of the GSM Network,
+with particular emphasis on the functionality typically provided by the BSC,
+MSC, HLR, VLR and SMSC.  Today it is a growing suite of libraries and programs,
+implementing protocol stacks and functional elements, including
+
+ * OsmoBSC - a pure GSM BSC, speaking Abis/IP to the BTS and A/IP to the MSC
+ * OsmoBSC-MGCP - MGCP helper to the OsmoBSC software
+ * OsmoNITB - a BSC+MSC+VLR+HLR+SMSC "Network in the box".
+ * OsmoCSCN - a voice CN with A/IP and IuCS/IP towards the BSC and/or HNB-GW
+ * OsmoSGSN - a GPRS SGSN with Gb/IP and IuPS/IP towards the PCU and/or HNB-GW
+ * Osmo-GbProxy - a Proxy to aggregate many Gb links as one Gb link to the SGSN
+ * OsmoBSCNAT - a gateway aggregating many A links as one A link to the MSC
+ * OsmoGTPHUB - a hub aggregating many GTP links (between SGSN and GGSN)
+ * ipaccess-utils - some tools to discover + configure ip.access nanoBTS
+ * bs11_config - a tool to configure the Siemens BS-11 microBTS
+
+Various interfaces towards the BTS are supported, among which are:
+
+ * Classic A-bis over E1 using a mISDN based E1 interface. In other
+   words, you can connect existing GSM Base Transceiver Station (BTS)
+   through E1 to OpenBSC.  So far, we have made it work with the Siemens BS-11,
+   various Ericsson RBS2xxx BTS models and the Nokia MetroSite.
+
+ * A-bis over IP as used by the ip.access nanoBTS product family as well as
+   the Open Source OsmoBTS software (by the same authors as OpenBSC).  OsmoBTS
+   in turn supports various transceiver hardware, including the sysmoBTS
+   product family, as well as SDR transceivers supported by OsmoTRX, such as
+   the UmTRX or USRP boardss.
+
+ * IuCS and IuPS over IP towards an HNB-GW (see osmo-iuh) for UMTS (3G)
+   voice and data links.
+
+Find OpenBSC online at
+http://openbsc.osmocom.org/
+
+	Harald Welte <laforge@gnumonks.org>

openbsc/configure.ac

@@ -0,0 +1,228 @@
+dnl Process this file with autoconf to produce a configure script
+AC_INIT([openbsc],
+	m4_esyscmd([./git-version-gen .tarball-version]),
+	[openbsc@lists.osmocom.org])
+
+AM_INIT_AUTOMAKE([dist-bzip2])
+AC_CONFIG_TESTDIR(tests)
+
+dnl kernel style compile messages
+m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
+
+dnl checks for programs
+AC_PROG_MAKE_SET
+AC_PROG_CC
+AC_PROG_INSTALL
+AC_PROG_RANLIB
+
+dnl checks for libraries
+AC_SEARCH_LIBS([dlopen], [dl dld], [LIBRARY_DL="$LIBS";LIBS=""])
+AC_SUBST(LIBRARY_DL)
+
+
+PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 0.6.4)
+PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 0.3.0)
+PKG_CHECK_MODULES(LIBOSMOCTRL, libosmoctrl)
+PKG_CHECK_MODULES(LIBOSMOGSM, libosmogsm >= 0.7.0)
+PKG_CHECK_MODULES(LIBOSMOABIS, libosmoabis >= 0.2.0)
+PKG_CHECK_MODULES(LIBOSMOGB, libosmogb >= 0.6.4)
+PKG_CHECK_MODULES(LIBOSMONETIF, libosmo-netif >= 0.0.1)
+PKG_CHECK_MODULES(LIBCRYPTO, libcrypto >= 0.9.5)
+PKG_CHECK_MODULES(LIBASN1C, libasn1c)
+PKG_CHECK_MODULES(LIBOSMORANAP, libosmo-ranap)
+PKG_CHECK_MODULES(LIBOSMOSIGTRAN, libosmo-sigtran)
+
+# Enabke/disable the NAT?
+AC_ARG_ENABLE([nat], [AS_HELP_STRING([--enable-nat], [Build the BSC NAT. Requires SCCP])],
+    [osmo_ac_build_nat="$enableval"],[osmo_ac_build_nat="no"])
+if test "$osmo_ac_build_nat" = "yes" ; then
+        PKG_CHECK_MODULES(LIBOSMOSCCP, libosmo-sccp >= 0.0.2)
+fi
+AM_CONDITIONAL(BUILD_NAT, test "x$osmo_ac_build_nat" = "xyes")
+AC_SUBST(osmo_ac_build_nat)
+
+# Enable/disable the BSC?
+AC_ARG_ENABLE([osmo-bsc], [AS_HELP_STRING([--enable-osmo-bsc], [Build the Osmo BSC])],
+    [osmo_ac_build_bsc="$enableval"],[osmo_ac_build_bsc="no"])
+if test "$osmo_ac_build_bsc" = "yes" ; then
+    PKG_CHECK_MODULES(LIBOSMOSCCP, libosmo-sccp >= 0.0.6)
+fi
+AM_CONDITIONAL(BUILD_BSC, test "x$osmo_ac_build_bsc" = "xyes")
+AC_SUBST(osmo_ac_build_bsc)
+
+# Enable/disable smpp support in the cscn?
+AC_ARG_ENABLE([smpp], [AS_HELP_STRING([--enable-smpp], [Build the SMPP interface])],
+    [osmo_ac_build_smpp="$enableval"],[osmo_ac_build_smpp="no"])
+if test "$osmo_ac_build_smpp" = "yes" ; then
+    PKG_CHECK_MODULES(LIBSMPP34, libsmpp34 >= 1.10)
+    AC_DEFINE(BUILD_SMPP, 1, [Define if we want to build SMPP])
+fi
+AM_CONDITIONAL(BUILD_SMPP, test "x$osmo_ac_build_smpp" = "xyes")
+AC_SUBST(osmo_ac_build_smpp)
+
+# Enable/disable transcoding within osmo-bsc_mgcp?
+AC_ARG_ENABLE([mgcp-transcoding], [AS_HELP_STRING([--enable-mgcp-transcoding], [Build the MGCP gateway with internal transcoding enabled.])],
+    [osmo_ac_mgcp_transcoding="$enableval"],[osmo_ac_mgcp_transcoding="no"])
+AC_ARG_WITH([g729], [AS_HELP_STRING([--with-g729], [Enable G.729 encoding/decoding.])], [osmo_ac_with_g729="$withval"],[osmo_ac_with_g729="no"])
+
+if test "$osmo_ac_mgcp_transcoding" = "yes" ; then
+    AC_SEARCH_LIBS([gsm_create], [gsm], [LIBRARY_GSM="$LIBS";LIBS=""])
+    AC_SUBST(LIBRARY_GSM)
+    if test "$osmo_ac_with_g729" = "yes" ; then
+	PKG_CHECK_MODULES(LIBBCG729, libbcg729 >= 0.1, [AC_DEFINE([HAVE_BCG729], [1], [Use bgc729 decoder/encoder])])
+    fi
+    AC_DEFINE(BUILD_MGCP_TRANSCODING, 1, [Define if we want to build the MGCP gateway with transcoding support])
+fi
+AM_CONDITIONAL(BUILD_MGCP_TRANSCODING, test "x$osmo_ac_mgcp_transcoding" = "xyes")
+AC_SUBST(osmo_ac_mgcp_transcoding)
+
+
+found_libgtp=yes
+PKG_CHECK_MODULES(LIBGTP, libgtp >= 0.92, , found_libgtp=no)
+AM_CONDITIONAL(HAVE_LIBGTP, test "$found_libgtp" = yes)
+AC_SUBST(found_libgtp)
+
+found_libcares=yes
+PKG_CHECK_MODULES([LIBCARES], [libcares], [], [found_libcares=no])
+AM_CONDITIONAL(HAVE_LIBCARES, test "$found_libcares" = yes)
+AC_SUBST(found_libcares)
+
+found_libgtp_and_libcares=no
+if test "$found_libgtp" = "yes" -a "$found_libcares" = "yes"; then
+    found_libgtp_and_libcares=yes
+fi
+AC_SUBST(found_libgtp_and_libcares)
+
+dnl checks for header files
+AC_HEADER_STDC
+AC_CHECK_HEADERS(dbi/dbd.h,,AC_MSG_ERROR(DBI library is not installed))
+AC_CHECK_HEADERS(pcap/pcap.h,,AC_MSG_ERROR(PCAP library is not installed))
+
+found_cdk=yes
+AC_CHECK_HEADERS(cdk/cdk.h,,found_cdk=no)
+AM_CONDITIONAL(HAVE_LIBCDK, test "$found_cdk" = yes)
+
+found_sqlite3=yes
+PKG_CHECK_MODULES(SQLITE3, sqlite3, ,found_sqlite3=no)
+AM_CONDITIONAL(HAVE_SQLITE3, test "$found_sqlite3" = yes)
+AC_SUBST(found_sqlite3)
+
+
+dnl Checks for typedefs, structures and compiler characteristics
+
+# The following test is taken from WebKit's webkit.m4
+saved_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -fvisibility=hidden "
+AC_MSG_CHECKING([if ${CC} supports -fvisibility=hidden])
+AC_COMPILE_IFELSE([AC_LANG_SOURCE([char foo;])],
+      [ AC_MSG_RESULT([yes])
+        SYMBOL_VISIBILITY="-fvisibility=hidden"],
+        AC_MSG_RESULT([no]))
+CFLAGS="$saved_CFLAGS"
+AC_SUBST(SYMBOL_VISIBILITY)
+
+# Coverage build taken from WebKit's configure.in
+AC_MSG_CHECKING([whether to enable code coverage support])
+AC_ARG_ENABLE(coverage,
+              AC_HELP_STRING([--enable-coverage],
+                             [enable code coverage support [default=no]]),
+              [],[enable_coverage="no"])
+AC_MSG_RESULT([$enable_coverage])
+if test "$enable_coverage" = "yes"; then
+   COVERAGE_CFLAGS="-ftest-coverage -fprofile-arcs"
+   COVERAGE_LDFLAGS="-ftest-coverage -fprofile-arcs"
+   AC_SUBST([COVERAGE_CFLAGS])
+   AC_SUBST([COVERAGE_LDFLAGS])
+fi
+
+AC_DEFUN([CHECK_TM_INCLUDES_TM_GMTOFF], [
+  AC_CACHE_CHECK(
+    [whether struct tm has tm_gmtoff member],
+    osmo_cv_tm_includes_tm_gmtoff,
+    [AC_LINK_IFELSE([
+      AC_LANG_PROGRAM([
+        #include <time.h>
+      ], [
+        time_t t = time(NULL);
+        struct tm* lt = localtime(&t);
+        int off = lt->tm_gmtoff;
+      ])
+    ],
+    osmo_cv_tm_includes_tm_gmtoff=yes,
+    osmo_cv_tm_includes_tm_gmtoff=no
+    )]
+  )
+  if test "x$osmo_cv_tm_includes_tm_gmtoff" = xyes; then
+    AC_DEFINE(HAVE_TM_GMTOFF_IN_TM, 1,
+              [Define if struct tm has tm_gmtoff member.])
+  fi
+])
+
+CHECK_TM_INCLUDES_TM_GMTOFF
+
+AC_ARG_ENABLE([vty_tests],
+		AC_HELP_STRING([--enable-vty-tests],
+				[Include the VTY/CTRL tests in make check (deprecated)
+				[default=no]]),
+		[enable_ext_tests="$enableval"],[enable_ext_tests="no"])
+AC_ARG_ENABLE([external_tests],
+		AC_HELP_STRING([--enable-external-tests],
+				[Include the VTY/CTRL tests in make check [default=no]]),
+		[enable_ext_tests="$enableval"],[enable_ext_tests="no"])
+if test "x$enable_ext_tests" = "xyes" ; then
+	AM_PATH_PYTHON
+	AC_CHECK_PROG(OSMOTESTEXT_CHECK,osmotestvty.py,yes)
+	 if test "x$OSMOTESTEXT_CHECK" != "xyes" ; then
+		AC_MSG_ERROR([Please install osmocom-python to run the VTY/CTRL tests.])
+	fi
+fi
+AC_MSG_CHECKING([whether to enable VTY/CTRL tests])
+AC_MSG_RESULT([$enable_ext_tests])
+AM_CONDITIONAL(ENABLE_EXT_TESTS, test "x$enable_ext_tests" = "xyes")
+
+dnl Generate the output
+AM_CONFIG_HEADER(bscconfig.h)
+
+AC_OUTPUT(
+    openbsc.pc
+    include/openbsc/Makefile
+    include/Makefile
+    src/Makefile
+    src/libtrau/Makefile
+    src/libbsc/Makefile
+    src/libmsc/Makefile
+    src/libmgcp/Makefile
+    src/libcommon/Makefile
+    src/libfilter/Makefile
+    src/libiu/Makefile
+    src/libxsc/Makefile
+    src/osmo-cscn/Makefile
+    src/osmo-bsc/Makefile
+    src/osmo-bsc_nat/Makefile
+    src/osmo-bsc_mgcp/Makefile
+    src/ipaccess/Makefile
+    src/utils/Makefile
+    src/gprs/Makefile
+    tests/Makefile
+    tests/atlocal
+    tests/libiudummy/Makefile
+    tests/gsm0408/Makefile
+    tests/db/Makefile
+    tests/channel/Makefile
+    tests/bsc/Makefile
+    tests/bsc-nat/Makefile
+    tests/bsc-nat-trie/Makefile
+    tests/mgcp/Makefile
+    tests/gprs/Makefile
+    tests/gbproxy/Makefile
+    tests/abis/Makefile
+    tests/smpp/Makefile
+    tests/trau/Makefile
+    tests/sgsn/Makefile
+    tests/subscr/Makefile
+    tests/oap/Makefile
+    tests/gtphub/Makefile
+    tests/mm_auth/Makefile
+    doc/Makefile
+    doc/examples/Makefile
+    Makefile)

openbsc/contrib/a-link/sccp-split-by-con.lua

@@ -0,0 +1,170 @@
+-- Split trace based on SCCP Source
+-- There are still bugs to find... bugs bugs bugs... hmm
+do
+        local function init_listener()
+                print("CREATED LISTENER")
+		local tap = Listener.new("ip", "sccp && (ip.src == 172.16.1.81 || ip.dst == 172.16.1.81)")
+		local sccp_type_field = Field.new("sccp.message_type")
+		local sccp_src_field = Field.new("sccp.slr")
+		local sccp_dst_field = Field.new("sccp.dlr")
+		local msg_type_field = Field.new("gsm_a.dtap_msg_mm_type")
+		local lu_rej_field = Field.new("gsm_a.dtap.rej_cause")
+		local ip_src_field = Field.new("ip.src")
+		local ip_dst_field = Field.new("ip.dst")
+
+		--
+		local bssmap_msgtype_field = Field.new("gsm_a.bssmap_msgtype")
+		-- assignment failure 0x03
+		-- 
+
+		--
+		local dtap_cause_field = Field.new("gsm_a_dtap.cause")
+		local dtap_cc_field = Field.new("gsm_a.dtap_msg_cc_type")
+
+		local connections = {}
+
+		function check_failure(con)
+			check_lu_reject(con)
+			check_disconnect(con)
+			check_failures(con)
+		end
+
+		-- cipher mode reject
+		function check_failures(con)
+			local msgtype = bssmap_msgtype_field()
+			if not msgtype then
+				return
+			end
+
+			msgtype = tonumber(msgtype)
+			if msgtype == 89 then
+				print("Cipher mode reject")
+				con[4] = true
+			elseif msgtype == 0x03 then
+				print("Assignment failure")
+				con[4] = true
+			elseif msgtype == 0x22 then
+				print("Clear Request... RF failure?")
+				con[4] = true
+			end
+		end
+
+		-- check if a DISCONNECT is normal
+		function check_disconnect(con)
+			local msg_type = dtap_cc_field()
+			if not msg_type then
+				return
+			end
+
+			if tonumber(msg_type) ~= 0x25 then
+				return
+			end
+
+			local cause = dtap_cause_field()
+			if not cause then
+				return
+			end
+
+			cause = tonumber(cause)
+			if cause ~= 0x10 then
+				print("DISCONNECT != Normal")
+				con[4] = true
+			end
+		end
+
+		-- check if we have a LU Reject
+		function check_lu_reject(con)
+			local msg_type =  msg_type_field()
+			if not msg_type then
+				return
+			end
+
+			msg_type = tonumber(tostring(msg_type))
+			if msg_type == 0x04 then
+				print("LU REJECT with " .. tostring(lu_rej_field()))
+				con[4] = true
+			end
+		end
+
+                function tap.packet(pinfo,tvb,ip)
+			local ip_src = tostring(ip_src_field())
+			local ip_dst = tostring(ip_dst_field())
+			local sccp_type = tonumber(tostring(sccp_type_field()))
+			local sccp_src = sccp_src_field()
+			local sccp_dst = sccp_dst_field()
+
+			local con
+
+			if sccp_type == 0x01 then
+			elseif sccp_type == 0x2 then
+				local src = string.format("%s-%s", ip_src, tostring(sccp_src))
+				local dst = string.format("%s-%s", ip_dst, tostring(sccp_dst))
+				local datestring = os.date("%Y%m%d%H%M%S")
+				local pcap_name = string.format("alink_trace_%s-%s_%s.pcap", src, dst, datestring)
+				local dumper = Dumper.new_for_current(pcap_name)
+
+				local con = { ip_src, tostring(sccp_src), tostring(sccp_dst), false, dumper, pcap_name }
+
+				dumper:dump_current()
+				connections[src] = con
+				connections[dst] = con
+			elseif sccp_type == 0x4 then
+				-- close a connection... remove it from the list
+				local src = string.format("%s-%s", ip_src, tostring(sccp_src))
+				local dst = string.format("%s-%s", ip_dst, tostring(sccp_dst))
+
+				local con = connections[src]
+				if not con then
+					return
+				end
+
+				con[5]:dump_current()
+				con[5]:flush()
+
+				-- this causes a crash on unpacted wireshark
+				con[5]:close()
+
+				-- the connection had a failure
+				if con[4] == true then
+					local datestring = os.date("%Y%m%d%H%M%S")
+					local new_name = string.format("alink_failure_%s_%s-%s.pcap", datestring, con[2], con[3])
+					os.rename(con[6], new_name)
+				else
+					os.remove(con[6])
+				end
+
+
+				-- clear the old connection
+				connections[src] = nil
+				connections[dst] = nil
+
+			elseif sccp_type == 0x5 then
+				-- not handled yet... we should verify stuff here...
+				local dst = string.format("%s-%s", ip_dst, tostring(sccp_dst))
+				local con = connections[dst]
+				if not con then
+					return
+				end
+				con[5]:dump_current()
+			elseif sccp_type == 0x6 then
+				local dst = string.format("%s-%s", ip_dst, tostring(sccp_dst))
+				local con = connections[dst]
+				if not con then
+					print("DON'T KNOW THIS CONNECTION for " .. ip_dst)
+					return
+				end
+				con[5]:dump_current()
+				check_failure(con)
+			end
+
+                end
+                function tap.draw()
+                        print("DRAW")
+                end
+                function tap.reset()
+                        print("RESET")
+                end
+        end
+
+        init_listener()
+end

openbsc/contrib/bsc-test/README

@@ -0,0 +1 @@
+Some crazy scripts call testing... and MSC link failure simulation

openbsc/contrib/bsc-test/all_dial

@@ -0,0 +1,8 @@
+ABORT BUSY
+ABORT 'NO CARRIER'
+ABORT 'OK'
+
+'' AT
+SAY "Dialing a number\n"
+'OK' ATD05660066;
+

openbsc/contrib/bsc-test/dial.sh

@@ -0,0 +1,11 @@
+#!/bin/sh
+# Evil dial script..
+
+while true;
+do
+	chat -v -f all_dial < /dev/ttyACM0 > /dev/ttyACM0
+	sleep 5s
+	chat -v -f hangup < /dev/ttyACM0 > /dev/ttyACM0
+	sleep 2s
+done
+

openbsc/contrib/bsc-test/drop-oml.sh

@@ -0,0 +1,6 @@
+#!/bin/sh
+sleep 3
+echo "enable"
+sleep 1
+echo "drop bts connection 0 oml"
+sleep 1

openbsc/contrib/bsc-test/drop.sh

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+while true;
+do
+	echo "Going to drop the OML connection"
+	./drop-oml.sh | telnet 127.0.0.1 4242
+	sleep 58m
+done

openbsc/contrib/bsc-test/hangup

@@ -0,0 +1,4 @@
+TIMEOUT 10
+'' ^Z
+SAY "Waiting for hangup confirm\n"
+'' ATH;

openbsc/contrib/bsc-test/msc.sh

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+while true;
+do
+	echo "Kill the osmo-bsc"
+	/usr/bin/kill -s SIGUSR2 `pidof osmo-bsc`
+	sleep 58s
+done

openbsc/contrib/bsc_control.py

@@ -0,0 +1,104 @@
+#!/usr/bin/python
+
+import sys,os
+from optparse import OptionParser
+import socket
+import struct
+
+verbose = False
+
+def prefix_ipa_ctrl_header(data):
+	return struct.pack(">HBB", len(data)+1, 0xee, 0) + data
+
+def remove_ipa_ctrl_header(data):
+	if (len(data) < 4):
+		raise BaseException("Answer too short!")
+	(plen, ipa_proto, osmo_proto) = struct.unpack(">HBB", data[:4])
+	if (plen + 3 > len(data)):
+		print "Warning: Wrong payload length (expected %i, got %i)" % (plen, len(data) - 3)
+	if (ipa_proto != 0xee or osmo_proto != 0):
+		raise BaseException("Wrong protocol in answer!")
+
+	return data[4:plen+3], data[plen+3:]
+
+def connect(host, port):
+	if verbose:
+		print "Connecting to host %s:%i" % (host, port)
+
+	sck = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+	sck.setblocking(1)
+	sck.connect((host, port))
+	return sck
+
+def send(sck, data):
+	if verbose:
+		print "Sending \"%s\"" %(data)
+	data = prefix_ipa_ctrl_header(data)
+	sck.send(data)
+
+def do_set(var, value, id, sck):
+	setmsg = "SET %s %s %s" %(options.id, var, value)
+	send(sck, setmsg)
+
+def do_get(var, id, sck):
+	getmsg = "GET %s %s" %(options.id, var)
+	send(sck, getmsg)
+
+parser = OptionParser("Usage: %prog [options] var [value]")
+parser.add_option("-d", "--host", dest="host",
+  help="connect to HOST", metavar="HOST")
+parser.add_option("-p", "--port", dest="port", type="int",
+  help="use PORT", metavar="PORT", default=4249)
+parser.add_option("-g", "--get", action="store_true",
+  dest="cmd_get", help="perform GET operation")
+parser.add_option("-s", "--set", action="store_true",
+  dest="cmd_set", help="perform SET operation")
+parser.add_option("-i", "--id", dest="id", default="1",
+  help="set id manually", metavar="ID")
+parser.add_option("-v", "--verbose", action="store_true",
+  dest="verbose", help="be verbose", default=False)
+parser.add_option("-m", "--monitor", action="store_true",
+  dest="monitor", help="monitor the connection for traps", default=False)
+
+(options, args) = parser.parse_args()
+
+verbose = options.verbose
+
+if options.cmd_set and options.cmd_get:
+	parser.error("Get and set options are mutually exclusive!")
+
+if not (options.cmd_get or options.cmd_set or options.monitor):
+	parser.error("One of -m, -g, or -s must be set")
+
+if not (options.host):
+	parser.error("Destination host and port required!")
+
+sock = connect(options.host, options.port)
+
+if options.cmd_set:
+	if len(args) < 2:
+		parser.error("Set requires var and value arguments")
+	do_set(args[0], ' '.join(args[1:]), options.id, sock)
+
+if options.cmd_get:
+	if len(args) != 1:
+		parser.error("Get requires the var argument")
+	do_get(args[0], options.id, sock)
+
+data = sock.recv(1024)
+while (len(data)>0):
+	(answer, data) = remove_ipa_ctrl_header(data)
+	print "Got message:", answer
+
+if options.monitor:
+	while (True):
+		data = sock.recv(1024)
+		if len(data) == 0:
+			print "Connection is gone."
+			break
+
+		while (len(data)>0):
+			(answer, data) = remove_ipa_ctrl_header(data)
+			print "Got message:", answer
+
+sock.close()

openbsc/contrib/bt.py

@@ -0,0 +1,33 @@
+#!/usr/bin/env python
+
+import os
+
+f = open("unbalanced")
+lines = []
+for line in f:
+    lines.append(line)
+
+filenames = {}
+
+output = []
+for line in lines:
+    if "[0x" in line:
+        start = line.find("[")
+        end = line.find("]")
+        addr = line[start+1:end]
+        try:
+            file = filenames[addr]
+        except KeyError:
+            r = os.popen("addr2line -fs -e ./bsc_hack %s" % addr)
+            all = r.read().replace("\n", ",")
+            file = all
+            filenames[addr] = file
+
+        line = line.replace(addr, file)
+    output.append(line)
+
+g = open("unbalanced.2", "w")
+g.write("".join(output))
+
+
+

openbsc/contrib/convert_to_enum.py

@@ -0,0 +1,37 @@
+#!/usr/bin/env python
+
+#
+# Convert ETSI documents to an enum
+#
+
+import re, sys
+
+def convert(string):
+    string = string.strip().replace(" ", "").rjust(8, "0")
+    var = 0
+    offset = 7
+    for char in string:
+        assert offset >= 0
+        var = var | (int(char) << offset)
+        offset = offset - 1
+
+    return var
+
+def string(name):
+    name = name.replace(" ", "_")
+    name = name.replace('"', "")
+    name = name.replace('/', '_')
+    name = name.replace('(', '_')
+    name = name.replace(')', '_')
+    return "%s_%s" % (sys.argv[2], name.upper())
+
+file = open(sys.argv[1])
+
+
+for line in file:
+    m = re.match(r"[ \t]*(?P<value>[01 ]+)[ ]+(?P<name>[a-zA-Z /0-9()]+)", line[:-1])
+
+    if m:
+        print "\t%s\t\t= %d," % (string(m.groupdict()["name"]), convert(m.groupdict()["value"]))
+    else:
+        print line[:-1]

openbsc/contrib/gprs/gb-proxy-unblock-bug.py

@@ -0,0 +1,58 @@
+#!/usr/bin/env python
+
+"""
+demonstrate a unblock bug on the GB Proxy..
+"""
+
+bts_ns_reset = "\x02\x00\x81\x01\x01\x82\x1f\xe7\x04\x82\x1f\xe7"
+ns_reset_ack = "\x03\x01\x82\x1f\xe7\x04\x82\x1f\xe7"
+
+bts_ns_unblock = "\x06"
+ns_unblock_ack = "\x07"
+
+bts_bvc_reset_0 = "\x00\x00\x00\x00\x22\x04\x82\x00\x00\x07\x81\x03\x3b\x81\x02"
+ns_bvc_reset_0_ack = "\x00\x00\x00\x00\x23\x04\x82\x00\x00"
+
+bts_bvc_reset_8167 = "\x00\x00\x00\x00\x22\x04\x82\x1f\xe7\x07\x81\x08\x08\x88\x72\xf4\x80\x10\x1c\x00\x9c\x40"
+
+
+import socket
+socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
+socket.bind(("0.0.0.0", 0))
+socket.setblocking(1)
+
+
+import sys
+port = int(sys.argv[1])
+print "Sending data to port: %d" % port
+
+def send_and_receive(packet):
+    socket.sendto(packet, ("127.0.0.1", port))
+
+    try:
+        data, addr = socket.recvfrom(4096)
+    except socket.error, e:
+        print "ERROR", e
+        import sys
+        sys.exit(0)
+    return data
+
+#send stuff once
+
+to_send = [
+    (bts_ns_reset, ns_reset_ack, "reset ack"),
+    (bts_ns_unblock, ns_unblock_ack, "unblock ack"),
+    (bts_bvc_reset_0, ns_bvc_reset_0_ack, "BVCI=0 reset ack"),
+]
+
+
+for (out, inp, type) in to_send:
+    res = send_and_receive(out)
+    if res != inp:
+        print "Failed to get the %s" % type
+        sys.exit(-1)
+
+import time
+time.sleep(3)
+res = send_and_receive(bts_bvc_reset_8167)
+print "Sent all messages... check wireshark for the last response"

openbsc/contrib/gprs/gprs-bssgp-histogram.lua

@@ -0,0 +1,78 @@
+-- Simple LUA script to print the size of BSSGP messages over their type...
+
+do
+	local ip_bucket = {}
+
+	local pdu_types = {}
+	pdu_types[ 6] = "PAGING"
+	pdu_types[11] = "SUSPEND"
+	pdu_types[12] = "SUSPEND-ACK"
+	pdu_types[32] = "BVC-BLOCK"
+	pdu_types[33] = "BVC-BLOCK-ACK"
+	pdu_types[34] = "BVC-RESET"
+	pdu_types[35] = "BVC-RESET-ACK"
+	pdu_types[36] = "UNBLOCK"
+	pdu_types[37] = "UNBLOCK-ACK"
+	pdu_types[38] = "FLOW-CONTROL-BVC"
+	pdu_types[39] = "FLOW-CONTROL-BVC-ACK"
+	pdu_types[40] = "FLOW-CONTROL-MS"
+	pdu_types[41] = "FLOW-CONTROL-MS-ACK"
+	pdu_types[44] = "LLC-DISCARDED"
+
+	local function init_listener()
+		-- handle the port as NS over IP
+		local udp_port_table = DissectorTable.get("udp.port")
+		local gprs_ns_dis = Dissector.get("gprs_ns")
+		udp_port_table:add(23000,gprs_ns_dis)
+
+		-- bssgp filters
+		local bssgp_pdu_get = Field.new("bssgp.pdu_type")
+		local udp_length_get = Field.new("udp.length")
+
+		local tap = Listener.new("ip", "udp.port == 23000")
+		function tap.packet(pinfo,tvb,ip)
+			local pdu = bssgp_pdu_get()
+			local len = udp_length_get()
+
+			-- only handle bssgp, but we also want the IP frame
+			if not pdu then
+				return
+			end
+
+			pdu = tostring(pdu)
+			if tonumber(pdu) == 0 or tonumber(pdu) == 1 then
+				return
+			end
+
+			local ip_src = tostring(ip.ip_src)
+			local bssgp_histo = ip_bucket[ip_src]
+			if not bssgp_histo then
+				bssgp_histo = {}
+				ip_bucket[ip_src] = bssgp_histo
+			end
+
+			local key = pdu
+			local bucket = bssgp_histo[key]
+			if not bucket then
+				bucket = {}
+				bssgp_histo[key] = bucket
+			end
+
+			table.insert(bucket, tostring(len))
+			print("IP: " .. ip_src .. " PDU: " .. pdu_types[tonumber(pdu)] .. " Length: " .. tostring(len))
+		end
+
+		function tap.draw()
+			-- well... this will not be called...
+--			for ip,bssgp_histo in pairs(dumpers) do
+--				print("IP " .. ip)
+--			end
+		end
+
+		function tap.reset()
+			-- well... this will not be called...
+		end
+	end
+
+	init_listener()
+end

openbsc/contrib/gprs/gprs-buffer-count.lua

@@ -0,0 +1,80 @@
+-- I count the buffer space needed for LLC PDUs in the worse case and print it
+
+do
+	local function init_listener()
+		-- handle the port as NS over IP
+		local udp_port_table = DissectorTable.get("udp.port")
+		local gprs_ns_dis = Dissector.get("gprs_ns")
+		udp_port_table:add(23000,gprs_ns_dis)
+
+		-- bssgp filters
+		local bssgp_pdu_get = Field.new("bssgp.pdu_type")
+		local bssgp_delay_get = Field.new("bssgp.delay_val")
+		local llcgprs_get = Field.new("llcgprs")
+		local pdus = nil
+
+		print("START...")
+
+		local tap = Listener.new("ip", "udp.port == 23000 && bssgp.pdu_type == 0")
+		function tap.packet(pinfo,tvb,ip)
+			local pdu = bssgp_pdu_get()
+			local len = llcgprs_get().len
+			local delay = bssgp_delay_get()
+
+			-- only handle bssgp, but we also want the IP frame
+			if not pdu then
+				return
+			end
+
+			if tonumber(tostring(delay)) == 65535 then
+				pdus = { next = pdus,
+					 len = len,
+					 expires = -1 }
+			else
+				local off = tonumber(tostring(delay)) / 100.0
+				pdus = { next = pdus,
+					 len = len,
+					 expires = pinfo.rel_ts + off }
+			end
+			local now_time = tonumber(tostring(pinfo.rel_ts))
+			local now_size = 0
+			local l = pdus
+			local prev = nil
+			local count = 0
+			while l do
+				if now_time < l.expires or l.expires == -1 then
+					now_size = now_size + l.len
+					prev = l
+					l = l.next
+					count = count + 1
+				else
+					-- delete things
+					if prev == nil then
+						pdus = nil
+						l = nil
+					else
+						prev.next = l.next
+						l = l.next
+					end
+				end
+			end
+--			print("TOTAL: " .. now_time .. " PDU_SIZE: " .. now_size)
+			print(now_time .. " " .. now_size / 1024.0 .. " " .. count)
+--			print("NOW: " .. tostring(pinfo.rel_ts) .. " Delay: " .. tostring(delay) .. " Length: " .. tostring(len))
+		end
+
+		function tap.draw()
+			-- well... this will not be called...
+--			for ip,bssgp_histo in pairs(dumpers) do
+--				print("IP " .. ip)
+--			end
+			print("END")
+		end
+
+		function tap.reset()
+			-- well... this will not be called...
+		end
+	end
+
+	init_listener()
+end

openbsc/contrib/gprs/gprs-split-trace-by-tlli.lua

@@ -0,0 +1,46 @@
+-- Create a file named by_ip/''ip_addess''.cap with all ip traffic of each ip host. (works for tshark only)
+-- Dump files are created for both source and destination hosts
+do
+	local dir = "by_tlli"
+	local dumpers = {}
+	local function init_listener()
+		local udp_port_table = DissectorTable.get("udp.port")
+		local gprs_ns_dis = Dissector.get("gprs_ns")
+		udp_port_table:add(23000,gprs_ns_dis)
+
+		local field_tlli = Field.new("bssgp.tlli")
+		local tap = Listener.new("ip", "udp.port == 23000")
+
+		-- we will be called once for every IP Header.
+		-- If there's more than one IP header in a given packet we'll dump the packet once per every header
+		function tap.packet(pinfo,tvb,ip)
+			local tlli = field_tlli()
+			if not tlli then
+				return
+			end
+
+			local tlli_str = tostring(tlli)
+			tlli_dmp = dumpers[tlli_str]
+			if not tlli_dmp then
+				local tlli_hex = string.format("0x%x", tonumber(tlli_str))
+				print("Creating dump for TLLI " .. tlli_hex)
+				tlli_dmp = Dumper.new_for_current(dir .. "/" .. tlli_hex .. ".pcap")
+				dumpers[tlli_str] = tlli_dmp
+			end
+			tlli_dmp:dump_current()
+			tlli_dmp:flush()
+		end
+		function tap.draw()
+			for tlli,dumper in pairs(dumpers) do
+				 dumper:flush()
+			end
+		end
+		function tap.reset()
+			for tlli,dumper in pairs(dumpers) do
+				 dumper:close()
+			end
+			dumpers = {}
+		end
+	end
+	init_listener()
+end

openbsc/contrib/gprs/gprs-verify-nu.lua

@@ -0,0 +1,59 @@
+-- This script verifies that the N(U) is increasing...
+--
+do
+	local nu_state_src = {}
+
+	local function init_listener()
+		-- handle the port as NS over IP
+		local udp_port_table = DissectorTable.get("udp.port")
+		local gprs_ns_dis = Dissector.get("gprs_ns")
+		udp_port_table:add(23000,gprs_ns_dis)
+
+		-- we want to look here...
+		local llc_sapi_get = Field.new("llcgprs.sapib")
+		local llc_nu_get = Field.new("llcgprs.nu")
+		local bssgp_tlli_get = Field.new("bssgp.tlli")
+
+		local tap = Listener.new("ip", "udp.port == 23000")
+		function tap.packet(pinfo,tvb,ip)
+			local llc_sapi = llc_sapi_get()
+			local llc_nu = llc_nu_get()
+			local bssgp_tlli = bssgp_tlli_get()
+
+			if not llc_sapi or not llc_nu or not bssgp_tlli then
+				return
+			end
+
+			local ip_src = tostring(ip.ip_src)
+			local bssgp_tlli = tostring(bssgp_tlli)
+			local llc_nu = tostring(llc_nu)
+			local llc_sapi = tostring(llc_sapi)
+
+			local src_key = ip_src .. "-" .. bssgp_tlli .. "-" .. llc_sapi
+			local last_nu = nu_state_src[src_key]
+			if not last_nu then
+				-- print("Establishing mapping for " .. src_key)
+				nu_state_src[src_key] = llc_nu
+				return
+			end
+
+			local function tohex(number)
+				return string.format("0x%x", tonumber(number))
+			end
+
+			nu_state_src[src_key] = llc_nu
+			if tonumber(last_nu) + 1 ~= tonumber(llc_nu) then
+				print("JUMP in N(U) on TLLI " .. tohex(bssgp_tlli) .. " and SAPI: " .. llc_sapi .. " src: " .. ip_src)
+				print("\t last: " .. last_nu .. " now: " .. llc_nu)
+			end
+		end
+
+		function tap.draw()
+		end
+
+		function tap.reset()
+		end
+	end
+	init_listener()
+end
+

openbsc/contrib/hlr-remove-old.sql

@@ -0,0 +1,18 @@
+-- Remove old data from the database
+DELETE FROM Subscriber
+	WHERE id != 1 AND datetime('now', '-10 days') > updated AND authorized != 1;
+DELETE FROM Equipment
+	WHERE datetime('now', '-10 days') > updated;
+DELETE FROM EquipmentWatch
+	WHERE datetime('now', '-10 days') > updated;
+DELETE FROM SMS
+	WHERE datetime('now', '-10 days') > created;
+DELETE FROM VLR
+	WHERE datetime('now', '-10 days') > updated;
+DELETE FROM ApduBlobs
+	WHERE datetime('now', '-10 days') > created;
+DELETE FROM Counters
+	WHERE datetime('now', '-10 days') > timestamp;
+DELETE FROM RateCounters
+	WHERE datetime('now', '-10 days') > timestamp;
+VACUUM;

openbsc/contrib/hlrsync/hlrsync.py

@@ -0,0 +1,125 @@
+#!/usr/bin/python2.5
+
+from __future__ import with_statement
+
+from pysqlite2 import dbapi2 as sqlite3
+import sys
+
+hlr = sqlite3.connect(sys.argv[1])
+web = sqlite3.connect(sys.argv[2])
+
+# switch to autocommit
+hlr.isolation_level = None
+web.isolation_level = None
+
+hlr.row_factory = sqlite3.Row
+web.row_factory = sqlite3.Row
+
+with hlr:
+	hlr_subscrs = hlr.execute("""
+		SELECT * FROM Subscriber
+	""").fetchall()
+	hlr_tokens = hlr.execute("""
+		SELECT * FROM AuthToken
+	""").fetchall()
+
+with web:
+	web_tokens = web.execute("""
+		SELECT * FROM reg_tokens
+	""").fetchall()
+	web_sms = web.execute("""
+		SELECT * FROM sms_queue
+	""").fetchall()
+
+# index by subscr id
+hlr_subscrs_by_id = {}
+hlr_subscrs_by_ext = {}
+hlr_tokens_by_subscr_id = {}
+for x in hlr_subscrs:
+	hlr_subscrs_by_id[x['id']] = x
+	hlr_subscrs_by_ext[x['extension']] = x
+del hlr_subscrs
+for x in hlr_tokens:
+	hlr_tokens_by_subscr_id[x['subscriber_id']] = x
+del hlr_tokens
+
+web_tokens_by_subscr_id = {}
+for x in web_tokens:
+	web_tokens_by_subscr_id[x['subscriber_id']] = x
+del web_tokens
+
+# remove leftover web_tokens and correct inconsistent fields
+with web:
+	for x in web_tokens_by_subscr_id.values():
+		subscr = hlr_subscrs_by_id.get(x['subscriber_id'], None)
+		if subscr is None:
+			web.execute("""
+				      DELETE FROM reg_tokens WHERE subscriber_id = ?
+				   """, (x['subscriber_id'],))
+			del web_tokens_by_subscr_id[x['subscriber_id']]
+			continue
+		if str(x['imsi']) != str(subscr['imsi']) or \
+		   x['extension'] != subscr['extension'] or \
+		   x['tmsi'] != subscr['tmsi'] or \
+		   x['lac'] != subscr['lac']:
+			web.execute("""
+				      UPDATE reg_tokens
+				      SET imsi = ?, extension = ?, tmsi = ?, lac = ?
+				      WHERE subscriber_id = ?
+				   """, (str(subscr['imsi']), subscr['extension'],
+				   subscr['tmsi'], subscr['lac'], x['subscriber_id']))
+
+# add missing web_tokens
+with web:
+	for x in hlr_tokens_by_subscr_id.values():
+		subscr = hlr_subscrs_by_id.get(x['subscriber_id'], None)
+		if subscr is None:
+			hlr.execute("""
+				      DELETE FROM AuthToken WHERE subscriber_id = ?
+				   """, (x['subscriber_id'],))
+			del hlr_tokens_by_subscr_id[x['subscriber_id']]
+			continue
+		webtoken = web_tokens_by_subscr_id.get(x['subscriber_id'], None)
+		if webtoken is None:
+			web.execute("""
+				      INSERT INTO reg_tokens
+				      (subscriber_id, extension, reg_completed, name, email, lac, imsi, token, tmsi)
+				      VALUES
+				      (?, ?, 0, ?, '', ?, ?, ?, ?)
+				   """, (x['subscriber_id'], subscr['extension'], subscr['name'],
+				   subscr['lac'], str(subscr['imsi']), x['token'], subscr['tmsi']))
+
+# authorize subscribers
+with hlr:
+	for x in web_tokens_by_subscr_id.values():
+		subscr = hlr_subscrs_by_id.get(x['subscriber_id'], None)
+		if x['reg_completed'] and not subscr['authorized']:
+			hlr.execute("""
+				      UPDATE Subscriber
+				      SET authorized = 1
+				      WHERE id = ?
+				   """, (x['subscriber_id'],))
+
+# Sync SMS from web to hlr
+with hlr:
+	for sms in web_sms:
+		subscr = hlr_subscrs_by_ext.get(sms['receiver_ext'])
+		if subscr is None:
+			print '%s not found' % sms['receiver_ext']
+			continue
+		hlr.execute("""
+				      INSERT INTO SMS
+				      (created, sender_id, receiver_id, reply_path_req, status_rep_req, protocol_id, data_coding_scheme, ud_hdr_ind, text)
+				      VALUES
+				      (?, 1, ?, 0, 0, 0, 0, 0, ?)
+				   """, (sms['created'], subscr['id'], sms['text']))
+with web:
+	for sms in web_sms:
+		web.execute("""
+				      DELETE FROM sms_queue WHERE id = ?
+				   """, (sms['id'],))
+
+
+hlr.close()
+web.close()
+