mirror of
https://gitea.osmocom.org/cellular-infrastructure/osmo-sip-connector.git
synced 2025-11-02 13:13:36 +00:00
5f79d5a319
Fixes a bug I introduced in5f73c2033bwhere we would not call mncc_call_leg_connect() on receiving 200 from SIP side, and therefore never send MNCC_SETUP_RSP to the MS Fixes:5f73c2033bChange-Id: Ic7cc56c0d68a27eb1229c0c4aa1fa54d00b660b6
Osmo SIP Connector ================== Simple utility to map MNCC to SIP and SIP to MNCC. The VTY interface can be used to make configurations. The code doesn't have any RTP or transcoding support. Call identities can be either the MSISDN or the IMSI of the subscriber. Requirements of Equipment ^^^^^^^^^^^^^^^^^^^^^^^^^ * DTMF need to be sent using SIP INFO messages. DTMF in RTP is not supported. * BTS+PBX and SIP connector+PBX must be in the same network (UDP must be able to flow directly between these elements) * No handover support. * IP based BTS (e.g. Sysmocom sysmoBTS but no Siemens BS11) * No emergency calls Limitations ^^^^^^^^^^^ * PT of RTP needs to match the one used by the BTS. E.g. AMR needs to use the same PT as the BTS. This is because rtp_payload2 is not yet supported by the osmo-bts software. * AMR SDP file doesn't include the mode-set params and allowed codec modes. This needs to be configured in some way.