kurtis.heimerl
db2aae579c
uhd: move non-52MHz transceiver to common radio device interface
...
Use the same header files for the device and start moving
toward a commmon transceiver without so much redundant code.
Signed-off-by: Thomas Tsou <ttsou@vt.edu >
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2641 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26 03:17:13 +00:00
kurtis.heimerl
02d04055a3
uhd: set and shadow settings through interface
...
Shadow all gains and frequencies, which minimizes device access.
This allows the transceiver to variably control the device
settings.
Signed-off-by: Thomas Tsou <ttsou@vt.edu >
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2640 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26 03:17:10 +00:00
kurtis.heimerl
993364485b
uhd: set receive gain during initialization
...
This shouldn't matter much, but the gain settings through the
interface are short circuited right now, which makes this a
problem.
Signed-off-by: Thomas Tsou <ttsou@vt.edu >
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2639 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26 03:17:07 +00:00
kurtis.heimerl
be6abe18cc
uhd: set hardware side delay offset for e100
...
The value is used to align transmit and receive time slots within
a sample. This oscilloscope measured value is close, but may
need minor tweaking.
Signed-off-by: Thomas Tsou <ttsou@vt.edu >
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2638 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26 03:17:05 +00:00
kurtis.heimerl
3cc1da9d8b
uhd: log useful information on monotonic errors
...
Track the current errant and previous timestamp values.
Signed-off-by: Thomas Tsou <ttsou@vt.edu >
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2637 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26 03:17:02 +00:00
kurtis.heimerl
c491997c1e
uhd: only the E100 supports FPGA timestamps and adjustable clock rate
...
Signed-off-by: Thomas Tsou <ttsou@vt.edu >
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2636 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26 03:17:00 +00:00
kurtis.heimerl
33f748f265
uhd: flush initial receive samples
...
Occasionally, the E100 will have errant timestamps at start
related to previous sessions. Early packets will be thrown
out anyways, so do this explicitly so the timestamps don't
royally fuck up the sample timing.
Signed-off-by: Thomas Tsou <ttsou@vt.edu >
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2635 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26 03:16:57 +00:00
kurtis.heimerl
965e757c53
uhd: add 52 MHz transceiver support
...
These are mostly identical changes as added to the non-52MHz
implementation with the exception of sample rate.
Signed-off-by: Thomas Tsou <ttsou@vt.edu >
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2634 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26 03:16:54 +00:00
kurtis.heimerl
d302868b13
uhd: remove extra type conversion
...
Type conversion, if necessary, should happen inside the device.
Signed-off-by: Thomas Tsou <ttsou@vt.edu >
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2633 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26 03:16:51 +00:00
kurtis.heimerl
79e71c925e
Transceiver52M: add WBX, DBSRX, and single board support
...
Remove all RFX specific parts and control daughterboard
functionality using the base API. The tuning is now set
to a non-inverted image so remove the I/Q swap as well.
Daughterboard configuration is set through an enum
variable. Currently, there is no auto-configuration and
the default is Tx/RX on sides A/B respectively. For
transceiver boards the receive antenna is set to RX2.
enum dboardConfigType {
TXA_RXB,
TXB_RXA,
TXA_RXA,
TXB_RXB
};
const dboardConfigType dboardConfig = TXA_RXB;
Signed-off-by: Thomas Tsou <ttsou@vt.edu >
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2632 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26 03:16:48 +00:00
kurtis.heimerl
f5eef205a7
transceiver: fix initialization segfault in radio interface
...
'loadTest' variable was never initialized sometimes causing
segmentation fault on transceiver startup.
Signed-off-by: Thomas Tsou <ttsou@vt.edu >
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2631 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26 03:16:45 +00:00
kurtis.heimerl
c8739b8b71
Reverting r2342
...
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2424 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-02 00:06:34 +00:00
hsamra
3ebf98c721
Updates to working with a single RFX...builds but not working yet.
...
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2342 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-10-14 02:32:19 +00:00
dburgess
0fd55ea482
Removed a Makefile that should not have benn checked in.
...
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2313 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-10-12 08:15:48 +00:00
dburgess
00de66004b
Changes to auto-foo files that should probably be removed anyway.
...
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2312 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-10-12 08:14:47 +00:00
dburgess
b3a0ca42db
Adding in the missing Transceiver52M directory
...
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2307 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-10-12 07:44:40 +00:00
