Bumped version to 0.1.9~1

when this option is used, it is impossible to cross-compile for x86
 variants like atom.

CommonLibs/Logger.cpp

@@ -193,7 +193,7 @@ Log::~Log()
 	if (mDummyInit) return;
 	// Anything at or above LOG_CRIT is an "alarm".
 	// Save alarms in the local list and echo them to stderr.
-	if (mPriority <= LOG_CRIT) {
+	if (mPriority <= LOG_ERR) {
 		if (sLoggerInited) addAlarm(mStream.str().c_str());
 		cerr << mStream.str() << endl;
 	}

README

@@ -1,168 +1,116 @@
-Welcome to the OpenBTS source code.
+This is the interface to the transcevier.
 
-
-For free support, please subscribe to openbts-discuss@lists.sourceforge.net.
-See http://sourceforge.net/mailarchive/forum.php?forum_name=openbts-discuss
-and https://lists.sourceforge.net/lists/listinfo/openbts-discuss for details.
-
-For additional information, refer to http://openbts.org.
-
-
-These are the directories:
-
-AsteriskConfig	Asterisk configuration files for use with OpenBTS.
-CommonLib	Common-use libraries, mostly C++ wrappers for basic facilities.
-Control		Control-layer functions for the protocols of GSM 04.08 and SIP.
-GSM		The GSM stack.
-SIP		Components of the SIP state machines ued by the control layer.
-SMS		The SMS stack.
-SR		The subscriber registry.
-TRXManager	The interface between the GSM stack and the radio.
-Transceiver	The software transceiver and specific installation tests.
-apps		OpenBTS application binaries.
-doc		Project documentation.
-tests		Test fixtures for subsets of OpenBTS components.
-smqueue		RFC-3428 store-and-forward server for SMS
+Each TRX Manager UDP socket interface represents a single ARFCN.
+Each of these per-ARFCN interfaces is a pair of UDP sockets, one for control and one for data.
+Give a base port B (5700), the master clock interface is at port P=B.
+The TRX-side control interface for C(N) is on  port P=B+2N+1 and the data interface is on an odd numbered port P=B+2N+2.
+The corresponding core-side interface for every socket is at P+100.
+For any given build, the number of ARFCN interfaces can be fixed.
 
 
 
-By default, OpenBTS assumes the following UDP port assignments:
+Indications on the Master Clock Interface
 
-5060 -- Asterisk SIP interface
-5061 -- local SIP softphone
-5062 -- OpenBTS SIP interface
-5063 -- smqueue SIP interface
-5064 -- subscriber registry SIP interface
-5700-range -- OpenBTS-transceiver interface
+The master clock interface is output only (from the radio).
+Messages are "indications".
 
-These can be controlled in the CONFIG table in /etc/OpenBTS.db.
+CLOCK gives the current value of the transceiver clock to be used by the core.
+This message is sent whenever a trasmission packet arrives that is too late or too early.  The clock value is NOT the current transceiver time.  It is a time setting the the core should use to give better packet arrival times.
+IND CLOCK <totalFrames>
 
-Standrd paths:
-/OpenBTS -- Binary installation.
-/etc/OpenBTS -- Configuration databases.
-/var/run/OpenBTS -- Real-time reporting databases.
 
-The script apps/setUpFiles.sh will create these directories and install the
-correct files in them.
+
+Commands on the Per-ARFCN Control Interface
+
+The per-ARFCN control interface uses a command-reponse protocol.
+Commands are NULL-terminated ASCII strings, one per UDP socket.
+Each command has a corresponding response.
+Every command is of the form:
+
+CMD <cmdtype> [params]
+
+The <cmdtype> is the actual command.
+Parameters are optional depending on the commands type.
+Every response is of the form:
+
+RSP <cmdtype> <status> [result]
+
+The <status> is 0 for success and a non-zero error code for failure.
+Successful responses may include results, depending on the command type.
+
+
+Power Control
+
+POWEROFF shuts off transmitter power and stops the demodulator.
+CMD POWEROFF
+RSP POWEROFF <status>
+
+POWERON starts the transmitter and starts the demodulator.  Initial power level is very low.
+This command fails if the transmitter and receiver are not yet tuned.
+This command fails if the transmit or receive frequency creates a conflict with another ARFCN that is already runnng.
+If the transceiver is already on, it response with success to this command.
+CMD POWERON
+RSP POWERON <status>
+
+SETPOWER sets output power in dB wrt full scale.
+This command fails if the transmitter and receiver are not running.
+CMD SETPOWER <dB>
+RSP SETPOWER <status> <dB>
+
+ADJPOWER adjusts power by the given dB step.  Response returns resulting power level wrt full scale.
+This command fails if the transmitter and receiver are not running.
+CMD ADJPOWER <dBStep>
+RSP ADJPOWER <status> <dBLevel>
+
+
+Tuning Control
+
+RXTUNE tunes the receiver to a given frequency in kHz.
+This command fails if the receiver is already running.
+(To re-tune you stop the radio, re-tune, and restart.)
+This command fails if the transmit or receive frequency creates a conflict with another ARFCN that is already runnng.
+CMD RXTUNE <kHz>
+RSP RXTUNE <status> <kHz>
+
+TXTUNE tunes the transmitter to a given frequency in kHz.
+This command fails if the transmitter is already running.
+(To re-tune you stop the radio, re-tune, and restart.)
+This command fails if the transmit or receive frequency creates a conflict with another ARFCN that is already runnng.
+CMD TXTUNE <kHz>
+RSP TXTUNE <status> <kHz>
+
+
+Timeslot Control
+
+SETSLOT sets the format of the uplink timeslots in the ARFCN.
+The <timeslot> indicates the timeslot of interest.
+The <chantype> indicates the type of channel that occupies the timeslot.
+A chantype of zero indicates the timeslot is off.
+CMD SETSLOT <timeslot> <chantype>
+RSP SETSLOT <status> <timeslot> <chantype>
+
+
+Messages on the per-ARFCN Data Interface
+
+Messages on the data interface carry one radio burst per UDP message.
+
+
+Received Data Burst
+
+1 byte timeslot index
+4 bytes GSM frame number, big endian
+1 byte RSSI in -dBm
+2 bytes correlator timing offset in 1/256 symbol steps, 2's-comp, big endian
+148 bytes soft symbol estimates, 0 -> definite "0", 255 -> definite "1"
+
+
+Transmit Data Burst
+
+1 byte timeslot index
+4 bytes GSM frame number, big endian
+1 byte transmit level wrt ARFCN max, -dB (attenuation)
+148 bytes output symbol values, 0 & 1
 
 
 
 
-Release history:
-
-Release	Name		SVN Reposiory	SVN Rev	Comments
-
-1.0	(none)		SF.net		??		completed L1, L2
-
-1.1	Arnaudville	GNU Radio	r10019 (trunk)
-
-1.2	Breaux Bridge	GNU Radio	r10088 (trunk)	GNU Build, very early assignment
-
-1.3	Carencro	KSP		r1 (trunk)	first post-injunction release
-
-1.4	Donaldsonville	KSP		r23 (trunk)	fixed Ubuntu build error
-
-1.5	Eunice		KSP		r39 (trunk)	fixed L2 bugs related to segmentation
-							removed incomplete SMS directory
-							moved "abort" calls into L3 subclasses
-
-1.6	New Iberia	KSP		r130 (trunk)	import of all 2.2 improvements to non-SMS release
-
-
-2.0	St. Francisville KSP		r54 (smswork)	SMS support
-							file-based configuration
-
-2.1	Grand Coteau	KSP		r70 (smswork)	DTMF support
-							fixed more Linux-related build errors
-								-lpthread
-								TLMessage constructor
-							expanded stack to prevent overflows in Linux
-							moved gSIPInterface to main app
-							fixed iterator bug in Pager
-
-2.2	Houma		KSP		r122 (smswork)	added LEGAL notice
-							removed Assert classes
-							stop paging on page response
-							fixed Pager-spin bug
-							fixed Transceiver spin bugs
-							fixed 2^32 microsecond rollover bug
-							reduced stack footprints in Transceiver
-							fixed SMS timestamps
-							check LAI before using TMSI in LUR
-							reduced memory requirement by 75%
-							removed PagerTest
-							fixed stale-transaction bug in paging handler
-							fixed USRP clock rollover bug
-							faster call connection
-							new USRPDevice design
-
-2.3	Jean Lafitte	KSP		r190? (trunk)	check for out-of-date RACH bursts
-							better TRX-GSM clock sync
-							formal logging system
-							command line interface
-							emergency call setup
-
-2.4	Kinder		KSP		r208? (trunk)	fixed BCCH neighbor list bug
-							support for neighbor lists
-							fixed support for non-local Asterisk servers
-							cleaner configuration management
-							more realtime control of BCCH parameters
-							proper rejection of Hold messages
-							fixed L3 hanging bug in MTDCheckBYE
-
-2.4.1	Kinder		KSP		r462		fixed lots of valgrind errors
-
-2.4.2	Kinder		KSP		r482		zero-length calling party number bug
-							g++ 4.4 #includes
-
-2.5	Lacassine	KSP		r551		imported Joshua Lackey patches
-							SIP fixes from Anne Kwong
-							SIP fixes from testing with SMS server
-							L3 TI handling fixes
-							SMS server support
-							GNU Radio 3.2 compatibility
-							configurable max range and LU-reject cause
-							"page" & "testcall" CLI features
-
-2.5.1	Lacassine	KSP		r595		fixed some build bugs for some Linux distros
-
-2.5.2	Lacassine	KSP		r630		fixed channel assignment bug for Nokia DCT4+ handsets
-
-2.5.3	Lacassine	KSP		r756		merged fix for transceiver startup crash
-								due to use of uninitialized variables (r646)
-							merged fix for fusb bug from trunk (r582)
-
-2.5.4	Lacassine	KSP		r812		merged fixes to build under latest Fedora and
-								to build with git GnuRadio (r814)
-
-2.6	Mamou		KSP		r886		fixed infamous fusb bug (r582)
-							fixed idle-filling table size bug
-							smoother uplink power control
-							load-limiting downlink power control
-							new "config" features (optional, static)
-							IMEI interrogation
-							fixed MOD "missing FIFO" bug
-							configurable short code features
-							fixed transceiver startup crash (r646)
-							readline support is back
-							fixed timing advance bug (r844)
-							added CLI "chans" command
-							track time-of-use in TMSI table (r844)
-							added CLI "noise" command (r844)
-							added CLI "rxpower" command (r844)
-							added CLI "unconfig" command
-
-2.7	Natchitoches	Range	rxxx			(never released publicly)
-							converted TMSITable to sqlite3 (r902)
-							sqlite3-based configuration (r???)
-							converted Logger to syslogd (r903)
-							added support for rest octets (r1022)
-							external database for transaction reporting (r1184)
-							external database for channel status reporting (r1203)
-							in-call delivery and submission of text messages (r1231)
-							RFC-2833 DMTF (r1249)
-
-2.8	Opelousas	Range	rxxx			move databases to /etc and /var
-							RRLP aiding support
-
-

Transceiver52M/Transceiver.cpp

@@ -23,6 +23,7 @@
 
 #include <stdio.h>
 #include <iomanip>      // std::setprecision
+#include <fstream>
 #include "Transceiver.h"
 #include <Logger.h>
 
@@ -151,10 +152,15 @@ Transceiver::Transceiver(int wBasePort,
     mTransmitLatency(wTransmitLatency), mRadioInterface(wRadioInterface),
     rssiOffset(wRssiOffset),
     mSPSTx(wSPS), mSPSRx(1), mChans(wChans), mOn(false),
-    mTxFreq(0.0), mRxFreq(0.0), mTSC(0), mMaxExpectedDelay(0)
+    mTxFreq(0.0), mRxFreq(0.0), mTSC(0), mMaxExpectedDelay(0), mWriteBurstToDiskMask(0)
 {
   txFullScale = mRadioInterface->fullScaleInputValue();
   rxFullScale = mRadioInterface->fullScaleOutputValue();
+
+  for (int i = 0; i < 8; i++) {
+    for (int j = 0; j < 8; j++)
+      mHandover[i][j] = false;
+  }
 }
 
 Transceiver::~Transceiver()
@@ -462,9 +468,15 @@ void Transceiver::setModulus(size_t timeslot, size_t chan)
 Transceiver::CorrType Transceiver::expectedCorrType(GSM::Time currTime,
                                                     size_t chan)
 {
+  static int tchh_subslot[26] = { 0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,0,1,0,1,0,1,0,1,0,1,1 };
+  static int sdcch4_subslot[102] = { 3,3,3,3,0,0,2,2,2,2,3,3,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,0,0,2,2,2,2,
+                                     3,3,3,3,0,0,0,0,0,0,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,0,0,2,2,2,2 };
+  static int sdcch8_subslot[102] = { 5,5,5,5,6,6,6,6,7,7,7,7,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,6,6,6,6,7,7,7,7,0,0,0,0,
+                                     1,1,1,1,2,2,2,2,3,3,3,3,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,6,6,6,6,7,7,7,7,4,4,4,4 };
   TransceiverState *state = &mStates[chan];
   unsigned burstTN = currTime.TN();
   unsigned burstFN = currTime.FN();
+  int subch;
 
   switch (state->chanType[burstTN]) {
   case NONE:
@@ -474,16 +486,25 @@ Transceiver::CorrType Transceiver::expectedCorrType(GSM::Time currTime,
     return IDLE;
     break;
   case I:
+    // TODO: Are we expecting RACH on an IDLE frame?
+/*    if (burstFN % 26 == 25)
+      return IDLE;*/
+    if (mHandover[burstTN][0])
+      return RACH;
     return TSC;
-    /*if (burstFN % 26 == 25) 
-      return IDLE;
-    else
-      return TSC;*/
     break;
   case II:
+    subch = tchh_subslot[burstFN % 26];
+    if (subch == 1)
+      return IDLE;
+    if (mHandover[burstTN][0])
+      return RACH;
     return TSC;
     break;
   case III:
+    subch = tchh_subslot[burstFN % 26];
+    if (mHandover[burstTN][subch])
+      return RACH;
     return TSC;
     break;
   case IV:
@@ -498,6 +519,8 @@ Transceiver::CorrType Transceiver::expectedCorrType(GSM::Time currTime,
       return RACH;
     else if ((mod51 == 45) || (mod51 == 46))
       return RACH;
+    else if (mHandover[burstTN][sdcch4_subslot[burstFN % 102]])
+      return RACH;
     else
       return TSC;
     break;
@@ -505,6 +528,8 @@ Transceiver::CorrType Transceiver::expectedCorrType(GSM::Time currTime,
   case VII:
     if ((burstFN % 51 <= 14) && (burstFN % 51 >= 12))
       return IDLE;
+    else if (mHandover[burstTN][sdcch8_subslot[burstFN % 102]])
+      return RACH;
     else
       return TSC;
     break;
@@ -540,7 +565,7 @@ int Transceiver::detectRACH(TransceiverState *state,
 {
   float threshold = 6.0;
 
-  return detectRACHBurst(burst, threshold, mSPSRx, &amp, &toa);
+  return detectRACHBurst(burst, threshold, mSPSRx, amp, toa);
 }
 
 /*
@@ -554,7 +579,7 @@ int Transceiver::detectTSC(TransceiverState *state, signalVector &burst,
   int success;
   int tn = time.TN();
   float chanOffset, threshold = 5.0;
-  bool noise, needDFE = false, estimateChan = false;
+  bool needDFE = false, estimateChan = false;
   double elapsed = time - state->chanEstimateTime[tn];
   signalVector *chanResp;
 
@@ -569,18 +594,18 @@ int Transceiver::detectTSC(TransceiverState *state, signalVector &burst,
   }
 
   /* Detect normal burst midambles */
-  success = analyzeTrafficBurst(burst, mTSC, threshold, mSPSRx, &amp,
-                                &toa, mMaxExpectedDelay, estimateChan,
+  success = analyzeTrafficBurst(burst, mTSC, threshold, mSPSRx, amp,
+                                toa, mMaxExpectedDelay, estimateChan,
                                 &chanResp, &chanOffset);
   if (success <= 0) {
     return success;
   }
 
-  noise = state->mNoiseLev;
-  state->SNRestimate[tn] = amp.norm2() / (noise * noise + 1.0);
-
   /* Set equalizer if unabled */
   if (needDFE && estimateChan) {
+     float noise = state->mNoiseLev;
+     state->SNRestimate[tn] = amp.norm2() / (noise * noise + 1.0);
+
      state->chanResponse[tn] = chanResp;
      state->chanRespOffset[tn] = chanOffset;
      state->chanRespAmplitude[tn] = amp;
@@ -616,11 +641,21 @@ SoftVector *Transceiver::demodulate(TransceiverState *state,
   return demodulateBurst(burst, mSPSRx, amp, toa);
 }
 
+void writeToFile(radioVector *radio_burst, size_t chan)
+{
+  GSM::Time time = radio_burst->getTime();
+  std::ostringstream fname;
+  fname << chan << "_" << time.FN() << "_" << time.TN() << ".fc";
+  std::ofstream outfile (fname.str().c_str(), std::ofstream::binary);
+  outfile.write((char*)radio_burst->getVector()->begin(), radio_burst->getVector()->size() * 2 * sizeof(float));
+  outfile.close();
+}
+
 /*
  * Pull bursts from the FIFO and handle according to the slot
  * and burst correlation type. Equalzation is currently disabled. 
  */
-SoftVector *Transceiver::pullRadioVector(GSM::Time &wTime, double &RSSI,
+SoftVector *Transceiver::pullRadioVector(GSM::Time &wTime, double &RSSI, bool &isRssiValid,
                                          double &timingOffset, double &noise,
                                          size_t chan)
 {
@@ -632,6 +667,7 @@ SoftVector *Transceiver::pullRadioVector(GSM::Time &wTime, double &RSSI,
   signalVector *burst;
   SoftVector *bits = NULL;
   TransceiverState *state = &mStates[chan];
+  isRssiValid = false;
 
   /* Blocking FIFO read */
   radioVector *radio_burst = mReceiveFIFO[chan]->read();
@@ -642,7 +678,15 @@ SoftVector *Transceiver::pullRadioVector(GSM::Time &wTime, double &RSSI,
   GSM::Time time = radio_burst->getTime();
   CorrType type = expectedCorrType(time, chan);
 
-  if ((type == OFF) || (type == IDLE)) {
+  /* Debug: dump bursts to disk */
+  /* bits 0-7  - chan 0 timeslots
+   * bits 8-15 - chan 1 timeslots */
+  if (mWriteBurstToDiskMask & ((1<<time.TN()) << (8*chan)))
+    writeToFile(radio_burst, chan);
+
+  /* No processing if the timeslot is off.
+   * Not even power level or noise calculation. */
+  if (type == OFF) {
     delete radio_burst;
     return NULL;
   }
@@ -666,7 +710,25 @@ SoftVector *Transceiver::pullRadioVector(GSM::Time &wTime, double &RSSI,
   /* Average noise on diversity paths and update global levels */
   burst = radio_burst->getVector(max_i);
   avg = sqrt(avg / radio_burst->chans());
-  state->mNoiseLev = state->mNoises.avg();
+
+  wTime = time;
+  RSSI = 20.0 * log10(rxFullScale / avg);
+
+  /* RSSI estimation are valid */
+  isRssiValid = true;
+
+  if (type == IDLE) {
+    /* Update noise levels */
+    state->mNoises.insert(avg);
+    state->mNoiseLev = state->mNoises.avg();
+    noise = 20.0 * log10(rxFullScale / state->mNoiseLev);
+
+    delete radio_burst;
+    return NULL;
+  } else {
+    /* Do not update noise levels */
+    noise = 20.0 * log10(rxFullScale / state->mNoiseLev);
+  }
 
   /* Detect normal or RACH bursts */
   if (type == TSC)
@@ -674,13 +736,11 @@ SoftVector *Transceiver::pullRadioVector(GSM::Time &wTime, double &RSSI,
   else
     success = detectRACH(state, *burst, amp, toa);
 
-  /* Update noise average if no bust detected or alert on error */
+  /* Alert an error and exit */
   if (success <= 0) {
-    if (success == SIGERR_NONE) {
-      state->mNoises.insert(avg);
-    } else if (success == -SIGERR_CLIP) {
+    if (success == -SIGERR_CLIP) {
       LOG(WARNING) << "Clipping detected on received RACH or Normal Burst";
-    } else {
+    } else if (success != SIGERR_NONE) {
       LOG(WARNING) << "Unhandled RACH or Normal Burst detection error";
     }
 
@@ -688,20 +748,15 @@ SoftVector *Transceiver::pullRadioVector(GSM::Time &wTime, double &RSSI,
     return NULL;
   }
 
+  timingOffset = toa / mSPSRx;
+
   /* Demodulate and set output info */
   if (equalize && (type != TSC))
     equalize = false;
 
-  if (avg - state->mNoiseLev > 0.0)
-    bits = demodulate(state, *burst, amp, toa, time.TN(), equalize);
-
-  wTime = time;
-  RSSI = 20.0 * log10(rxFullScale / avg);
-  timingOffset = toa / mSPSRx;
-  noise = 20.0 * log10(rxFullScale / state->mNoiseLev);
+  bits = demodulate(state, *burst, amp, toa, time.TN(), equalize);
 
   delete radio_burst;
-
   return bits;
 }
 
@@ -751,6 +806,24 @@ void Transceiver::driveControl(size_t chan)
       sprintf(response,"RSP POWERON 1");
     else
       sprintf(response,"RSP POWERON 0");
+      for (int i = 0; i < 8; i++) {
+        for (int j = 0; j < 8; j++)
+          mHandover[i][j] = false;
+      }
+  }
+  else if (strcmp(command,"HANDOVER")==0){
+    int ts=0,ss=0;
+    sscanf(buffer,"%3s %s %d %d",cmdcheck,command,&ts,&ss);
+    mHandover[ts][ss] = true;
+    LOG(WARNING) << "HANDOVER RACH at timeslot " << ts << " subslot " << ss;
+    sprintf(response,"RSP HANDOVER 0 %d %d",ts,ss);
+  }
+  else if (strcmp(command,"NOHANDOVER")==0){
+    int ts=0,ss=0;
+    sscanf(buffer,"%3s %s %d %d",cmdcheck,command,&ts,&ss);
+    mHandover[ts][ss] = false;
+    LOG(WARNING) << "NOHANDOVER at timeslot " << ts << " subslot " << ss;
+    sprintf(response,"RSP NOHANDOVER 0 %d %d",ts,ss);
   }
   else if (strcmp(command,"SETMAXDLY")==0) {
     //set expected maximum time-of-arrival
@@ -844,6 +917,14 @@ void Transceiver::driveControl(size_t chan)
     sprintf(response,"RSP SETSLOT 0 %d %d",timeslot,corrCode);
 
   }
+  else if (strcmp(command,"_SETBURSTTODISKMASK")==0) {
+    // debug command! may change or disapear without notice
+    // set a mask which bursts to dump to disk
+    int mask;
+    sscanf(buffer,"%3s %s %d",cmdcheck,command,&mask);
+    mWriteBurstToDiskMask = mask;
+    sprintf(response,"RSP _SETBURSTTODISKMASK 0 %d",mask);
+  }
   else {
     LOG(WARNING) << "bogus command " << command << " on control interface.";
     sprintf(response,"RSP ERR 1");
@@ -906,8 +987,9 @@ void Transceiver::driveReceiveFIFO(size_t chan)
   int TOAint;  // in 1/256 symbols
   double noise; // noise level in dBFS
   GSM::Time burstTime;
+  bool isRssiValid; // are RSSI, noise and burstTime valid
 
-  rxBurst = pullRadioVector(burstTime, RSSI, TOA, noise, chan);
+  rxBurst = pullRadioVector(burstTime, RSSI, isRssiValid, TOA, noise, chan);
 
   if (rxBurst) { 
     dBm = RSSI+rssiOffset;

Transceiver52M/Transceiver.h

@@ -195,7 +195,7 @@ private:
   void pushRadioVector(GSM::Time &nowTime);
 
   /** Pull and demodulate a burst from the receive FIFO */
-  SoftVector *pullRadioVector(GSM::Time &wTime, double &RSSI,
+  SoftVector *pullRadioVector(GSM::Time &wTime, double &RSSI, bool &isRssiValid,
                               double &timingOffset, double &noise,
                               size_t chan = 0);
 
@@ -227,11 +227,13 @@ private:
   int mSPSRx;                          ///< number of samples per Rx symbol
   size_t mChans;
 
-  bool mOn;			       ///< flag to indicate that transceiver is powered on
+  bool mOn;	                           ///< flag to indicate that transceiver is powered on
+  bool mHandover[8][8];                ///< expect handover to the timeslot/subslot
   double mTxFreq;                      ///< the transmit frequency
   double mRxFreq;                      ///< the receive frequency
   unsigned mTSC;                       ///< the midamble sequence code
-  unsigned mMaxExpectedDelay;            ///< maximum expected time-of-arrival offset in GSM symbols
+  unsigned mMaxExpectedDelay;          ///< maximum expected time-of-arrival offset in GSM symbols
+  unsigned mWriteBurstToDiskMask;      ///< debug: bitmask to indicate which timeslots to dump to disk
 
   std::vector<TransceiverState> mStates;
 

Transceiver52M/UHDDevice.cpp

@@ -210,8 +210,7 @@ uhd::time_spec_t convert_time(TIMESTAMP ticks, double rate)
 
 TIMESTAMP convert_time(uhd::time_spec_t ts, double rate)
 {
-	TIMESTAMP ticks = ts.get_full_secs() * rate;
-	return ts.get_tick_count(rate) + ticks;
+	return (TIMESTAMP)(ts.get_real_secs() * rate + 0.5);
 }
 
 /*
@@ -290,7 +289,7 @@ public:
 	uhd_device(size_t sps, size_t chans, bool diversity, double offset);
 	~uhd_device();
 
-	int open(const std::string &args, bool extref);
+	int open(const std::string &args, bool extref, bool swap_channels);
 	bool start();
 	bool stop();
 	bool restart();
@@ -473,18 +472,24 @@ void uhd_device::init_gains()
 		tx_gain_min = range.start();
 		tx_gain_max = range.stop();
 	}
+	LOG(INFO) << "Supported Tx gain range [" << tx_gain_min << "; " << tx_gain_max << "]";
 
 	range = usrp_dev->get_rx_gain_range();
 	rx_gain_min = range.start();
 	rx_gain_max = range.stop();
+	LOG(INFO) << "Supported Rx gain range [" << rx_gain_min << "; " << rx_gain_max << "]";
 
 	for (size_t i = 0; i < tx_gains.size(); i++) {
-		usrp_dev->set_tx_gain((tx_gain_min + tx_gain_max) / 2, i);
+		double gain = (tx_gain_min + tx_gain_max) / 2;
+		LOG(INFO) << "Default setting Tx gain for channel " << i << " to " << gain;
+		usrp_dev->set_tx_gain(gain, i);
 		tx_gains[i] = usrp_dev->get_tx_gain(i);
 	}
 
 	for (size_t i = 0; i < rx_gains.size(); i++) {
-		usrp_dev->set_rx_gain((rx_gain_min + rx_gain_max) / 2, i);
+		double gain = (rx_gain_min + rx_gain_max) / 2;
+		LOG(INFO) << "Default setting Rx gain for channel " << i << " to " << gain;
+		usrp_dev->set_rx_gain(gain, i);
 		rx_gains[i] = usrp_dev->get_rx_gain(i);
 	}
 
@@ -582,7 +587,7 @@ double uhd_device::setTxGain(double db, size_t chan)
 
 	tx_gains[chan] = usrp_dev->get_tx_gain(chan);
 
-	LOG(INFO) << "Set TX gain to " << tx_gains[chan] << "dB";
+	LOG(INFO) << "Set TX gain to " << tx_gains[chan] << "dB (asked for " << db << "dB)";
 
 	return tx_gains[chan];
 }
@@ -597,7 +602,7 @@ double uhd_device::setRxGain(double db, size_t chan)
 	usrp_dev->set_rx_gain(db, chan);
 	rx_gains[chan] = usrp_dev->get_rx_gain(chan);
 
-	LOG(INFO) << "Set RX gain to " << rx_gains[chan] << "dB";
+	LOG(INFO) << "Set RX gain to " << rx_gains[chan] << "dB (asked for " << db << "dB)";
 
 	return rx_gains[chan];
 }
@@ -694,7 +699,7 @@ bool uhd_device::parse_dev_type()
 	return true;
 }
 
-int uhd_device::open(const std::string &args, bool extref)
+int uhd_device::open(const std::string &args, bool extref, bool swap_channels)
 {
 	// Find UHD devices
 	uhd::device_addr_t addr(args);
@@ -720,7 +725,7 @@ int uhd_device::open(const std::string &args, bool extref)
 	// Verify and set channels
 	if ((dev_type == B210) && (chans == 2)) {
 	} else if ((dev_type == UMTRX) && (chans == 2)) {
-		uhd::usrp::subdev_spec_t subdev_spec("A:0 B:0");
+		uhd::usrp::subdev_spec_t subdev_spec(swap_channels?"B:0 A:0":"A:0 B:0");
 		usrp_dev->set_tx_subdev_spec(subdev_spec);
 		usrp_dev->set_rx_subdev_spec(subdev_spec);
 	} else if (chans != 1) {
@@ -1115,7 +1120,7 @@ uhd::tune_request_t uhd_device::select_freq(double freq, size_t chan, bool tx)
 	uhd::tune_request_t treq(freq);
 
 	if (dev_type == UMTRX) {
-		if (offset > 0.0)
+		if (offset != 0.0)
 			return uhd::tune_request_t(freq, offset);
 
 		// Don't use DSP tuning, because LMS6002D PLL steps are small enough.
@@ -1126,6 +1131,7 @@ uhd::tune_request_t uhd_device::select_freq(double freq, size_t chan, bool tx)
 		treq.rf_freq = freq;
 		treq.dsp_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
 		treq.dsp_freq = 0.0;
+		return treq;
 	} else if (chans == 1) {
 		if (offset == 0.0)
 			return treq;
@@ -1430,6 +1436,19 @@ ssize_t smpl_buf::write(void *buf, size_t len, TIMESTAMP timestamp)
 	if ((timestamp + len) <= time_end)
 		return ERROR_TIMESTAMP;
 
+	if (timestamp < time_end) {
+		LOG(ERR) << "Overwriting old buffer data: timestamp="<<timestamp<<" time_end="<<time_end;
+		uhd::time_spec_t ts = convert_time(timestamp, clk_rt);
+		LOG(DEBUG) << "Requested timestamp = " << timestamp << " (real_sec=" << std::fixed << ts.get_real_secs() << " = " << convert_time(ts, clk_rt) << ") rate=" << clk_rt;
+		// Do not return error here, because it's a rounding error and is not fatal
+	}
+	if (timestamp > time_end && time_end != 0) {
+		LOG(ERR) << "Skipping buffer data: timestamp="<<timestamp<<" time_end="<<time_end;
+		uhd::time_spec_t ts = convert_time(timestamp, clk_rt);
+		LOG(DEBUG) << "Requested timestamp = " << timestamp << " (real_sec=" << std::fixed << ts.get_real_secs() << " = " << convert_time(ts, clk_rt) << ") rate=" << clk_rt;
+		// Do not return error here, because it's a rounding error and is not fatal
+	}
+
 	// Starting index
 	size_t write_start = (data_start + (timestamp - time_start)) % buf_len;
 

Transceiver52M/USRPDevice.cpp

@@ -89,7 +89,7 @@ USRPDevice::USRPDevice(size_t sps, size_t, bool)
 #endif
 }
 
-int USRPDevice::open(const std::string &, bool)
+int USRPDevice::open(const std::string &, bool, bool)
 {
   writeLock.unlock();
 

Transceiver52M/USRPDevice.h

@@ -99,7 +99,7 @@ private:
   USRPDevice(size_t sps, size_t chans = 1, bool diversity = false);
 
   /** Instantiate the USRP */
-  int open(const std::string &, bool);
+  int open(const std::string &, bool, bool);
 
   /** Start the USRP */
   bool start();

Transceiver52M/osmo-trx.cpp

@@ -71,6 +71,7 @@ struct trx_config {
 	bool diversity;
 	double offset;
 	double rssi_offset;
+	bool swap_channels;
 };
 
 ConfigurationTable gConfig;
@@ -187,6 +188,7 @@ bool trx_setup_config(struct trx_config *config)
 	ost << "   Diversity............... " << divstr << std::endl;
 	ost << "   Tuning offset........... " << config->offset << std::endl;
 	ost << "   RSSI to dBm offset...... " << config->rssi_offset << std::endl;
+	ost << "   Swap channels........... " << config->swap_channels << std::endl;
 	std::cout << ost << std::endl;
 
 	return true;
@@ -295,7 +297,8 @@ static void print_help()
 		"  -f    Enable C0 filler table\n"
 		"  -o    Set baseband frequency offset (default=auto)\n"
 		"  -r    Random burst test mode with TSC\n"
-		"  -R    RSSI to dBm offset in dB (default=0)\n",
+		"  -R    RSSI to dBm offset in dB (default=0)\n"
+		"  -S    Swap channels (UmTRX only)\n",
 		"EMERG, ALERT, CRT, ERR, WARNING, NOTICE, INFO, DEBUG");
 }
 
@@ -312,8 +315,9 @@ static void handle_options(int argc, char **argv, struct trx_config *config)
 	config->diversity = false;
 	config->offset = 0.0;
 	config->rssi_offset = 0.0;
+	config->swap_channels = false;
 
-	while ((option = getopt(argc, argv, "ha:l:i:p:c:dxfo:s:r:R:")) != -1) {
+	while ((option = getopt(argc, argv, "ha:l:i:p:c:dxfo:s:r:R:S")) != -1) {
 		switch (option) {
 		case 'h':
 			print_help();
@@ -356,6 +360,9 @@ static void handle_options(int argc, char **argv, struct trx_config *config)
 		case 'R':
 			config->rssi_offset = atof(optarg);
 			break;
+		case 'S':
+			config->swap_channels = true;
+			break;
 		default:
 			print_help();
 			exit(0);
@@ -400,7 +407,7 @@ int main(int argc, char *argv[])
 	/* Create the low level device object */
 	usrp = RadioDevice::make(config.sps, config.chans,
 				 config.diversity, config.offset);
-	type = usrp->open(config.dev_args, config.extref);
+	type = usrp->open(config.dev_args, config.extref, config.swap_channels);
 	if (type < 0) {
 		LOG(ALERT) << "Failed to create radio device" << std::endl;
 		goto shutdown;

Transceiver52M/radioDevice.h

@@ -41,7 +41,7 @@ class RadioDevice {
                            bool diversity = false, double offset = 0.0);
 
   /** Initialize the USRP */
-  virtual int open(const std::string &args = "", bool extref = false)=0;
+  virtual int open(const std::string &args = "", bool extref = false, bool swap_channels = false)=0;
 
   virtual ~RadioDevice() { }
 

Transceiver52M/sigProcLib.cpp

@@ -1386,26 +1386,25 @@ static float maxAmplitude(signalVector &burst)
     return max;
 }
 
-/* 
- * RACH burst detection
+/*
+ * RACH/Normal burst detection with clipping detection
  *
  * Correlation window parameters:
- *   target: Tail bits + RACH length (reduced from 41 to a multiple of 4)
- *   head: Search 4 symbols before target 
- *   tail: Search 10 symbols after target
+ *   target: Tail bits + burst length
+ *   head: Search symbols before target
+ *   tail: Search symbols after target
  */
-int detectRACHBurst(signalVector &rxBurst,
-		    float thresh,
-		    int sps,
-		    complex *amp,
-		    float *toa)
+int detectGeneralBurst(signalVector &rxBurst,
+                       float thresh,
+                       int sps,
+                       complex &amp,
+                       float &toa,
+                       int target, int head, int tail,
+                       CorrelationSequence *sync)
 {
-  int rc, start, target, head, tail, len;
+  int rc, start, len;
   bool clipping = false;
-  float _toa;
-  complex _amp;
   signalVector *corr;
-  CorrelationSequence *sync;
 
   if ((sps != 1) && (sps != 4))
     return -SIGERR_UNSUPPORTED;
@@ -1419,38 +1418,57 @@ int detectRACHBurst(signalVector &rxBurst,
     clipping = true;
   }
 
-  target = 8 + 40;
-  head = 4;
-  tail = 10;
-
   start = (target - head) * sps - 1;
   len = (head + tail) * sps;
-  sync = gRACHSequence;
   corr = new signalVector(len);
 
   rc = detectBurst(rxBurst, *corr, sync,
-                   thresh, sps, &_amp, &_toa, start, len);
+                   thresh, sps, &amp, &toa, start, len);
   delete corr;
 
   if (rc < 0) {
     return -SIGERR_INTERNAL;
   } else if (!rc) {
-    if (amp)
-      *amp = 0.0f;
-    if (toa)
-      *toa = 0.0f;
+    amp = 0.0f;
+    toa = 0.0f;
     return clipping?-SIGERR_CLIP:SIGERR_NONE;
   }
 
   /* Subtract forward search bits from delay */
-  if (toa)
-    *toa = _toa - head * sps;
-  if (amp)
-    *amp = _amp;
+  toa -= head * sps;
 
   return 1;
 }
 
+
+/* 
+ * RACH burst detection
+ *
+ * Correlation window parameters:
+ *   target: Tail bits + RACH length (reduced from 41 to a multiple of 4)
+ *   head: Search 4 symbols before target 
+ *   tail: Search 10 symbols after target
+ */
+int detectRACHBurst(signalVector &rxBurst,
+            float thresh,
+            int sps,
+            complex &amp,
+            float &toa)
+{
+  int rc, target, head, tail;
+  CorrelationSequence *sync;
+
+  target = 8 + 40;
+  head = 4;
+  tail = 10;
+  sync = gRACHSequence;
+
+  rc = detectGeneralBurst(rxBurst, thresh, sps, amp, toa,
+                          target, head, tail, sync);
+
+  return rc;
+}
+
 /* 
  * Normal burst detection
  *
@@ -1460,67 +1478,32 @@ int detectRACHBurst(signalVector &rxBurst,
  *   tail: Search 4 symbols + maximum expected delay
  */
 int analyzeTrafficBurst(signalVector &rxBurst, unsigned tsc, float thresh,
-                        int sps, complex *amp, float *toa, unsigned max_toa,
+                        int sps, complex &amp, float &toa, unsigned max_toa,
                         bool chan_req, signalVector **chan, float *chan_offset)
 {
-  int rc, start, target, head, tail, len;
-  bool clipping = false;
-  complex _amp;
-  float _toa;
-  signalVector *corr;
+  int rc, target, head, tail;
   CorrelationSequence *sync;
 
-  if ((tsc < 0) || (tsc > 7) || ((sps != 1) && (sps != 4)))
+  if ((tsc < 0) || (tsc > 7))
     return -SIGERR_UNSUPPORTED;
 
-  // Detect potential clipping
-  // We still may be able to demod the burst, so we'll give it a try
-  // and only report clipping if we can't demod.
-  float maxAmpl = maxAmplitude(rxBurst);
-  if (maxAmpl > CLIP_THRESH) {
-    LOG(DEBUG) << "max burst amplitude: " << maxAmpl << " is above the clipping threshold: " << CLIP_THRESH << std::endl;
-    clipping = true;
-  }
-
   target = 3 + 58 + 16 + 5;
   head = 4;
   tail = 4 + max_toa;
-
-  start = (target - head) * sps - 1;
-  len = (head + tail) * sps;
   sync = gMidambles[tsc];
-  corr = new signalVector(len);
 
-  rc = detectBurst(rxBurst, *corr, sync,
-                   thresh, sps, &_amp, &_toa, start, len);
-  delete corr;
-
-  if (rc < 0) {
-    return -SIGERR_INTERNAL;
-  } else if (!rc) {
-    if (amp)
-      *amp = 0.0f;
-    if (toa)
-      *toa = 0.0f;
-    return clipping?-SIGERR_CLIP:SIGERR_NONE;
-  }
-
-  /* Subtract forward search bits from delay */
-  _toa -= head * sps;
-  if (toa)
-    *toa = _toa;
-  if (amp)
-    *amp = _amp;
+  rc = detectGeneralBurst(rxBurst, thresh, sps, amp, toa,
+                          target, head, tail, sync);
 
   /* Equalization not currently supported */
-  if (chan_req) {
+  if (rc > 0 && chan_req) {
     *chan = new signalVector(6 * sps);
 
     if (chan_offset)
       *chan_offset = 0.0;
   }
 
-  return 1;
+  return rc;
 }
 
 signalVector *decimateVector(signalVector &wVector, size_t factor)

Transceiver52M/sigProcLib.h

@@ -192,8 +192,8 @@ bool energyDetect(signalVector &rxBurst,
 int detectRACHBurst(signalVector &rxBurst,
                     float detectThreshold,
                     int sps,
-                    complex *amplitude,
-                    float* TOA);
+                    complex &amplitude,
+                    float &TOA);
 
 /**
         Normal burst correlator, detector, channel estimator.
@@ -210,15 +210,15 @@ int detectRACHBurst(signalVector &rxBurst,
         @return positive if threshold value is reached, negative on error, zero otherwise
 */
 int analyzeTrafficBurst(signalVector &rxBurst,
-			unsigned TSC,
-			float detectThreshold,
-			int sps,
-			complex *amplitude,
-			float *TOA,
+                        unsigned TSC,
+                        float detectThreshold,
+                        int sps,
+                        complex &amplitude,
+                        float &TOA,
                         unsigned maxTOA,
                         bool requestChannel = false,
-			signalVector** channelResponse = NULL,
-			float *channelResponseOffset = NULL);
+                        signalVector** channelResponse = NULL,
+                        float *channelResponseOffset = NULL);
 
 /**
 	Decimate a vector.

Transceiver52M/x86/Makefile.am

@@ -1,5 +1,5 @@
 if !ARCH_ARM
-AM_CFLAGS = -Wall -std=gnu99 -march=native -I../common
+AM_CFLAGS = -Wall -std=gnu99 -I../common
 
 noinst_LTLIBRARIES = libarch.la
 

debian/changelog

@@ -0,0 +1,19 @@
+osmo-trx (0.1.9~1) trusty; urgency=medium
+
+  * minor debian changes
+  * correct atom cross-compilation
+  * corrected build-time and run-time dependencies
+
+ -- Kirill Zakharenko <earwin@gmail.com>  Thu, 23 Jul 2015 00:01:07 +0000
+
+osmo-trx (0.1.9) trusty; urgency=medium
+
+  * Ask Ivan, really
+
+ -- Kirill Zakharenko <earwin@gmail.com>  Thu, 16 Jul 2015 12:13:46 +0000
+
+osmo-trx (0.1.8) precise; urgency=low
+
+     * Initial release (Closes: #nnnn) <nnnn is the bug number of your ITP
+
+ -- Ivan Klyuchnikov <Ivan.Kluchnikov@fairwaves.ru>  Sun, 9 Mar 2014 14:10:10 +0400

debian/compat

@@ -0,0 +1 @@
+9

debian/control

@@ -0,0 +1,24 @@
+Source: osmo-trx
+Maintainer: Ivan Klyuchnikov <ivan.kluchnikov@fairwaves.ru>
+Section: net
+Priority: optional
+Standards-Version: 3.9.3
+Build-Depends: debhelper (>= 9), autotools-dev, libdbd-sqlite3, pkg-config, dh-autoreconf, libuhd-dev, libusb-1.0-0-dev, libboost-all-dev, hardening-wrapper
+Homepage: http://openbsc.osmocom.org/trac/wiki/OsmoTRX
+Vcs-Git: git://git.osmocom.org/osmo-trx
+Vcs-Browser: http://cgit.osmocom.org/osmo-trx
+
+Package: osmo-trx
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, libdbd-sqlite3
+Description: OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS
+
+Package: osmo-trx-dbg
+Architecture: any
+Section: debug
+Priority: extra
+Depends: osmo-trx (= ${binary:Version}), ${misc:Depends}
+Description: Debug symbols for the osmo-trx
+ Make debugging possible
+
+

debian/copyright

@@ -0,0 +1,25 @@
+The Debian packaging is:
+
+    Copyright (C) 2014 Max <max.suraev@fairwaves.ru>
+
+It was downloaded from:
+
+    git://git.osmocom.org/osmo-trx
+
+Upstream Authors:
+
+    Thomas Tsou <tom@tsou.cc>
+    David A. Burgess <dburgess@kestrelsp.com>
+    Harvind S. Samra <hssamra@kestrelsp.com>
+    Raffi Sevlian <raffisev@gmail.com>
+
+Copyright:
+
+     Copyright (C) 2012-2013 Thomas Tsou <tom@tsou.cc>
+     Copyright (C) 2011 Range Networks, Inc.
+     Copyright (C) 2008-2011 Free Software Foundation, Inc.
+
+License:
+
+    GNU Affero General Public License, Version 3
+

debian/osmo-trx.install

@@ -0,0 +1 @@
+/usr/bin/osmo-trx

debian/rules

@@ -0,0 +1,15 @@
+#!/usr/bin/make -f
+
+DEB_BUILD_HARDENING=1
+
+%:
+	dh $@ --with autoreconf
+
+override_dh_auto_configure:
+	dh_auto_configure -- --without-sse CFLAGS="-DHAVE_SSE3 -march=atom -mtune=atom -O2" CXXFLAGS="-DHAVE_SSE3 -march=atom -mtune=atom -O2"
+
+override_dh_shlibdeps:
+	dh_shlibdeps --dpkg-shlibdeps-params=--ignore-missing-info
+
+override_dh_strip:
+	dh_strip --dbg-package=osmo-trx-dbg

debian/source/format

@@ -0,0 +1 @@
+3.0 (native)

utils/clockdump.sh

@@ -0,0 +1,3 @@
+#!/bin/sh
+sudo tcpdump -i lo0 -A udp port 5700
+