Add .gitignore

Create runtime version check for minimum supported UHD driver
when using USRP E3XX devices. The minimum version, 3.9.0, matches
supported version on current E3XX release images.

Signed-off-by: Tom Tsou <tom.tsou@ettus.com>

.gitignore

@@ -0,0 +1,56 @@
+.deps
+.libs
+*.o
+*.lo
+CommonLibs/BitVectorTest
+CommonLibs/ConfigurationTest
+CommonLibs/F16Test
+CommonLibs/InterthreadTest
+CommonLibs/LogTest
+CommonLibs/Makefile
+CommonLibs/Makefile.in
+CommonLibs/RegexpTest
+CommonLibs/SocketsTest
+CommonLibs/TimevalTest
+CommonLibs/URLEncodeTest
+CommonLibs/VectorTest
+CommonLibs/libcommon.la
+GSM/Makefile
+GSM/Makefile.in
+GSM/libGSM.la
+Makefile
+Makefile.in
+Transceiver52M/Makefile
+Transceiver52M/Makefile.in
+Transceiver52M/arm/Makefile
+Transceiver52M/arm/Makefile.in
+Transceiver52M/common/.dirstamp
+Transceiver52M/libtransceiver.la
+Transceiver52M/osmo-trx
+Transceiver52M/x86/Makefile
+Transceiver52M/x86/Makefile.in
+Transceiver52M/x86/libarch.la
+aclocal.m4
+autom4te.cache/
+compile
+config.guess
+config.h
+config.h.in
+config.log
+config.status
+config.sub
+config/libtool.m4
+config/ltoptions.m4
+config/ltsugar.m4
+config/ltversion.m4
+config/lt~obsolete.m4
+configure
+depcomp
+install-sh
+libtool
+ltmain.sh
+missing
+sqlite3/Makefile
+sqlite3/Makefile.in
+sqlite3/libsqlite.la
+stamp-h1

CommonLibs/Configuration.cpp

@@ -35,7 +35,7 @@
 #ifdef DEBUG_CONFIG
 #define	debugLogEarly gLogEarly
 #else
-#define	debugLogEarly
+#define	debugLogEarly(x,y,z)
 #endif
 
 

CommonLibs/Logger.cpp

@@ -38,6 +38,14 @@
 
 using namespace std;
 
+// Switches to enable/disable logging targets
+// MUST BE DEFINED BEFORE gConfig FOR gLogEarly() TO WORK CORRECTLY
+bool gLogToConsole = true;
+bool gLogToSyslog = false;
+FILE *gLogToFile = NULL;
+Mutex gLogToLock;
+
+
 // Reference to a global config table, used all over the system.
 extern ConfigurationTable gConfig;
 
@@ -67,9 +75,6 @@ const char *levelNames[] = {
 	"EMERG", "ALERT", "CRIT", "ERR", "WARNING", "NOTICE", "INFO", "DEBUG"
 };
 int numLevels = 8;
-bool gLogToConsole = 0;
-FILE *gLogToFile = NULL;
-Mutex gLogToLock;
 
 
 int levelStringToInt(const string& name)
@@ -192,18 +197,20 @@ Log::~Log()
 	if (mDummyInit) return;
 	// Anything at or above LOG_CRIT is an "alarm".
 	// Save alarms in the local list and echo them to stderr.
-	if (mPriority <= LOG_CRIT) {
+	if (mPriority <= LOG_ERR) {
 		if (sLoggerInited) addAlarm(mStream.str().c_str());
 		cerr << mStream.str() << endl;
 	}
-	// Current logging level was already checked by the macro.
-	// So just log.
+	// Current logging level was already checked by the macro. So just log.
+	// Log to syslog
+	if (gLogToSyslog) {
 		syslog(mPriority, "%s", mStream.str().c_str());
-	// pat added for easy debugging.
+	}
+	// Log to file and console
 	if (gLogToConsole||gLogToFile) {
 		int mlen = mStream.str().size();
 		int neednl = (mlen==0 || mStream.str()[mlen-1] != '\n');
-		gLogToLock.lock();
+		ScopedLock lock(gLogToLock);
 		if (gLogToConsole) {
 			// The COUT() macro prevents messages from stomping each other but adds uninteresting thread numbers,
 			// so just use std::cout.
@@ -215,7 +222,6 @@ Log::~Log()
 			if (neednl) {fputc('\n',gLogToFile);}
 			fflush(gLogToFile);
 		}
-		gLogToLock.unlock();
 	}
 }
 
@@ -243,10 +249,9 @@ void gLogInit(const char* name, const char* level, int facility)
 		gConfig.set("Log.Level",level);
 	}
 
-	// Pat added, tired of the syslog facility.
 	// Both the transceiver and OpenBTS use this same facility, but only OpenBTS/OpenNodeB may use this log file:
 	string str = gConfig.getStr("Log.File");
-	if (gLogToFile==0 && str.length() && 0==strncmp(gCmdName,"Open",4)) {
+	if (gLogToFile==NULL && str.length() && 0==strncmp(gCmdName,"Open",4)) {
 		const char *fn = str.c_str();
 		if (fn && *fn && strlen(fn)>3) {	// strlen because a garbage char is getting in sometimes.
 			gLogToFile = fopen(fn,"w"); // New log file each time we start.
@@ -270,7 +275,30 @@ void gLogEarly(int level, const char *fmt, ...)
 	va_list args;
 
 	va_start(args, fmt);
-	vsyslog(level | LOG_USER, fmt, args);
+
+	if (gLogToSyslog) {
+		va_list args_copy;
+		va_copy(args_copy, args);
+		vsyslog(level | LOG_USER, fmt, args_copy);
+		va_end(args_copy);
+	}
+
+	if (gLogToConsole) {
+		va_list args_copy;
+		va_copy(args_copy, args);
+		vprintf(fmt, args_copy);
+		printf("\n");
+		va_end(args_copy);
+	}
+
+	if (gLogToFile) {
+		va_list args_copy;
+		va_copy(args_copy, args);
+		vfprintf(gLogToFile, fmt, args_copy);
+		fprintf(gLogToFile, "\n");
+		va_end(args_copy);
+	}
+
 	va_end(args);
 }
 

CommonLibs/Logger.h

@@ -116,7 +116,8 @@ class Log {
 
 	std::ostringstream& get();
 };
-extern bool gLogToConsole;	// Pat added for easy debugging.
+extern bool gLogToConsole;	// Output log messages to stdout
+extern bool gLogToSyslog;	// Output log messages to syslog
 
 
 

CommonLibs/Sockets.cpp

@@ -187,24 +187,20 @@ int DatagramSocket::send(const struct sockaddr* dest, const char * message)
 	return send(dest,message,length);
 }
 
-
-
-
-
-int DatagramSocket::read(char* buffer)
+int DatagramSocket::read(char* buffer, size_t length)
 {
-	socklen_t temp_len = sizeof(mSource);
-	int length = recvfrom(mSocketFD, (void*)buffer, MAX_UDP_LENGTH, 0,
-	    (struct sockaddr*)&mSource,&temp_len);
-	if ((length==-1) && (errno!=EAGAIN)) {
+	socklen_t addr_len = sizeof(mSource);
+	int rd_length = recvfrom(mSocketFD, (void *) buffer, length, 0,
+		(struct sockaddr*) &mSource, &addr_len);
+
+	if ((rd_length==-1) && (errno!=EAGAIN)) {
 		perror("DatagramSocket::read() failed");
 		throw SocketError();
 	}
-	return length;
+	return rd_length;
 }
 
-
-int DatagramSocket::read(char* buffer, unsigned timeout)
+int DatagramSocket::read(char* buffer, size_t length, unsigned timeout)
 {
 	fd_set fds;
 	FD_ZERO(&fds);
@@ -218,7 +214,7 @@ int DatagramSocket::read(char* buffer, unsigned timeout)
 		throw SocketError();
 	}
 	if (sel==0) return -1;
-	if (FD_ISSET(mSocketFD,&fds)) return read(buffer);
+	if (FD_ISSET(mSocketFD,&fds)) return read(buffer, length);
 	return -1;
 }
 
@@ -269,7 +265,7 @@ void UDPSocket::open(unsigned short localPort)
 	size_t length = sizeof(address);
 	bzero(&address,length);
 	address.sin_family = AF_INET;
-	address.sin_addr.s_addr = INADDR_ANY;
+	address.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
 	address.sin_port = htons(localPort);
 	if (bind(mSocketFD,(struct sockaddr*)&address,length)<0) {
 		perror("bind() failed");

CommonLibs/Sockets.h

@@ -108,7 +108,7 @@ public:
 		@param buffer A char[MAX_UDP_LENGTH] procured by the caller.
 		@return The number of bytes received or -1 on non-blocking pass.
 	*/
-	int read(char* buffer);
+	int read(char* buffer, size_t length);
 
 	/**
 		Receive a packet with a timeout.
@@ -116,7 +116,7 @@ public:
 		@param maximum wait time in milliseconds
 		@return The number of bytes received or -1 on timeout.
 	*/
-	int read(char* buffer, unsigned timeout);
+	int read(char* buffer, size_t length, unsigned timeout);
 
 
 	/** Send a packet to a given destination, other than the default. */

CommonLibs/SocketsTest.cpp

@@ -42,7 +42,7 @@ void *testReaderIP(void *)
 	int rc = 0;
 	while (rc<gNumToSend) {
 		char buf[MAX_UDP_LENGTH];
-		int count = readSocket.read(buf);
+		int count = readSocket.read(buf, MAX_UDP_LENGTH);
 		if (count>0) {
 			COUT("read: " << buf);
 			rc++;
@@ -62,7 +62,7 @@ void *testReaderUnix(void *)
 	int rc = 0;
 	while (rc<gNumToSend) {
 		char buf[MAX_UDP_LENGTH];
-		int count = readSocket.read(buf);
+		int count = readSocket.read(buf, MAX_UDP_LENGTH);
 		if (count>0) {
 			COUT("read: " << buf);
 			rc++;

CommonLibs/Threads.h

@@ -172,8 +172,15 @@ class Thread {
 	void start(void *(*task)(void*), void *arg);
 
 	/** Join a thread that will stop on its own. */
-	void join() { int s = pthread_join(mThread,NULL); assert(!s); mThread = 0; }
+	void join() {
+		if (mThread) {
+			int s = pthread_join(mThread, NULL);
+			assert(!s);
+		}
+	}
 
+	/** Send cancelation to thread */
+	void cancel() { pthread_cancel(mThread); }
 };
 
 

GSM/GSMCommon.cpp

@@ -41,10 +41,24 @@ const BitVector GSM::gTrainingSequence[] = {
     BitVector("11101111000100101110111100"),
 };
 
+const BitVector GSM::gEdgeTrainingSequence[] = {
+    BitVector("111111001111111001111001001001111111111111001111111111001111111001111001001001"),
+    BitVector("111111001111001001111001001001111001001001001111111111001111001001111001001001"),
+    BitVector("111001111111111111001001001111001001001111001111111001111111111111001001001111"),
+    BitVector("111001111111111001001001001111001001111001111111111001111111111001001001001111"),
+    BitVector("111111111001001111001111001001001111111001111111111111111001001111001111001001"),
+    BitVector("111001111111001001001111001111001001111111111111111001111111001001001111001111"),
+    BitVector("001111001111111001001001001001111001001111111111001111001111111001001001001001"),
+    BitVector("001001001111001001001001111111111001111111001111001001001111001001001001111111"),
+};
+
 const BitVector GSM::gDummyBurst("0001111101101110110000010100100111000001001000100000001111100011100010111000101110001010111010010100011001100111001111010011111000100101111101010000");
 
 const BitVector GSM::gRACHSynchSequence("01001011011111111001100110101010001111000");
 
+//                               |-head-||---------midamble----------------------||--------------data----------------||t|
+const BitVector GSM::gRACHBurst("0011101001001011011111111001100110101010001111000110111101111110000111001001010110011000");
+
 
 int32_t GSM::FNDelta(int32_t v1, int32_t v2)
 {

GSM/GSMCommon.h

@@ -46,12 +46,15 @@ namespace GSM {
 
 /** GSM Training sequences from GSM 05.02 5.2.3. */
 extern const BitVector gTrainingSequence[];
+extern const BitVector gEdgeTrainingSequence[];
 
 /** C0T0 filler burst, GSM 05.02, 5.2.6 */
 extern const BitVector gDummyBurst;
 
 /** Random access burst synch. sequence */
 extern const BitVector gRACHSynchSequence;
+/** Random access burst synch. sequence, GSM 05.02 5.2.7 */
+extern const BitVector gRACHBurst;
 
 
 /**@name Modulus operations for frame numbers. */

README

@@ -1,168 +1,116 @@
-Welcome to the OpenBTS source code.
+This is the interface to the transcevier.
 
-
-For free support, please subscribe to openbts-discuss@lists.sourceforge.net.
-See http://sourceforge.net/mailarchive/forum.php?forum_name=openbts-discuss
-and https://lists.sourceforge.net/lists/listinfo/openbts-discuss for details.
-
-For additional information, refer to http://openbts.org.
-
-
-These are the directories:
-
-AsteriskConfig	Asterisk configuration files for use with OpenBTS.
-CommonLib	Common-use libraries, mostly C++ wrappers for basic facilities.
-Control		Control-layer functions for the protocols of GSM 04.08 and SIP.
-GSM		The GSM stack.
-SIP		Components of the SIP state machines ued by the control layer.
-SMS		The SMS stack.
-SR		The subscriber registry.
-TRXManager	The interface between the GSM stack and the radio.
-Transceiver	The software transceiver and specific installation tests.
-apps		OpenBTS application binaries.
-doc		Project documentation.
-tests		Test fixtures for subsets of OpenBTS components.
-smqueue		RFC-3428 store-and-forward server for SMS
+Each TRX Manager UDP socket interface represents a single ARFCN.
+Each of these per-ARFCN interfaces is a pair of UDP sockets, one for control and one for data.
+Give a base port B (5700), the master clock interface is at port P=B.
+The TRX-side control interface for C(N) is on  port P=B+2N+1 and the data interface is on an odd numbered port P=B+2N+2.
+The corresponding core-side interface for every socket is at P+100.
+For any given build, the number of ARFCN interfaces can be fixed.
 
 
 
-By default, OpenBTS assumes the following UDP port assignments:
+Indications on the Master Clock Interface
 
-5060 -- Asterisk SIP interface
-5061 -- local SIP softphone
-5062 -- OpenBTS SIP interface
-5063 -- smqueue SIP interface
-5064 -- subscriber registry SIP interface
-5700-range -- OpenBTS-transceiver interface
+The master clock interface is output only (from the radio).
+Messages are "indications".
 
-These can be controlled in the CONFIG table in /etc/OpenBTS.db.
+CLOCK gives the current value of the transceiver clock to be used by the core.
+This message is sent whenever a trasmission packet arrives that is too late or too early.  The clock value is NOT the current transceiver time.  It is a time setting the the core should use to give better packet arrival times.
+IND CLOCK <totalFrames>
 
-Standrd paths:
-/OpenBTS -- Binary installation.
-/etc/OpenBTS -- Configuration databases.
-/var/run/OpenBTS -- Real-time reporting databases.
 
-The script apps/setUpFiles.sh will create these directories and install the
-correct files in them.
+
+Commands on the Per-ARFCN Control Interface
+
+The per-ARFCN control interface uses a command-reponse protocol.
+Commands are NULL-terminated ASCII strings, one per UDP socket.
+Each command has a corresponding response.
+Every command is of the form:
+
+CMD <cmdtype> [params]
+
+The <cmdtype> is the actual command.
+Parameters are optional depending on the commands type.
+Every response is of the form:
+
+RSP <cmdtype> <status> [result]
+
+The <status> is 0 for success and a non-zero error code for failure.
+Successful responses may include results, depending on the command type.
+
+
+Power Control
+
+POWEROFF shuts off transmitter power and stops the demodulator.
+CMD POWEROFF
+RSP POWEROFF <status>
+
+POWERON starts the transmitter and starts the demodulator.  Initial power level is very low.
+This command fails if the transmitter and receiver are not yet tuned.
+This command fails if the transmit or receive frequency creates a conflict with another ARFCN that is already runnng.
+If the transceiver is already on, it response with success to this command.
+CMD POWERON
+RSP POWERON <status>
+
+SETPOWER sets output power in dB wrt full scale.
+This command fails if the transmitter and receiver are not running.
+CMD SETPOWER <dB>
+RSP SETPOWER <status> <dB>
+
+ADJPOWER adjusts power by the given dB step.  Response returns resulting power level wrt full scale.
+This command fails if the transmitter and receiver are not running.
+CMD ADJPOWER <dBStep>
+RSP ADJPOWER <status> <dBLevel>
+
+
+Tuning Control
+
+RXTUNE tunes the receiver to a given frequency in kHz.
+This command fails if the receiver is already running.
+(To re-tune you stop the radio, re-tune, and restart.)
+This command fails if the transmit or receive frequency creates a conflict with another ARFCN that is already runnng.
+CMD RXTUNE <kHz>
+RSP RXTUNE <status> <kHz>
+
+TXTUNE tunes the transmitter to a given frequency in kHz.
+This command fails if the transmitter is already running.
+(To re-tune you stop the radio, re-tune, and restart.)
+This command fails if the transmit or receive frequency creates a conflict with another ARFCN that is already runnng.
+CMD TXTUNE <kHz>
+RSP TXTUNE <status> <kHz>
+
+
+Timeslot Control
+
+SETSLOT sets the format of the uplink timeslots in the ARFCN.
+The <timeslot> indicates the timeslot of interest.
+The <chantype> indicates the type of channel that occupies the timeslot.
+A chantype of zero indicates the timeslot is off.
+CMD SETSLOT <timeslot> <chantype>
+RSP SETSLOT <status> <timeslot> <chantype>
+
+
+Messages on the per-ARFCN Data Interface
+
+Messages on the data interface carry one radio burst per UDP message.
+
+
+Received Data Burst
+
+1 byte timeslot index
+4 bytes GSM frame number, big endian
+1 byte RSSI in -dBm
+2 bytes correlator timing offset in 1/256 symbol steps, 2's-comp, big endian
+148 bytes soft symbol estimates, 0 -> definite "0", 255 -> definite "1"
+
+
+Transmit Data Burst
+
+1 byte timeslot index
+4 bytes GSM frame number, big endian
+1 byte transmit level wrt ARFCN max, -dB (attenuation)
+148 bytes output symbol values, 0 & 1
 
 
 
 
-Release history:
-
-Release	Name		SVN Reposiory	SVN Rev	Comments
-
-1.0	(none)		SF.net		??		completed L1, L2
-
-1.1	Arnaudville	GNU Radio	r10019 (trunk)
-
-1.2	Breaux Bridge	GNU Radio	r10088 (trunk)	GNU Build, very early assignment
-
-1.3	Carencro	KSP		r1 (trunk)	first post-injunction release
-
-1.4	Donaldsonville	KSP		r23 (trunk)	fixed Ubuntu build error
-
-1.5	Eunice		KSP		r39 (trunk)	fixed L2 bugs related to segmentation
-							removed incomplete SMS directory
-							moved "abort" calls into L3 subclasses
-
-1.6	New Iberia	KSP		r130 (trunk)	import of all 2.2 improvements to non-SMS release
-
-
-2.0	St. Francisville KSP		r54 (smswork)	SMS support
-							file-based configuration
-
-2.1	Grand Coteau	KSP		r70 (smswork)	DTMF support
-							fixed more Linux-related build errors
-								-lpthread
-								TLMessage constructor
-							expanded stack to prevent overflows in Linux
-							moved gSIPInterface to main app
-							fixed iterator bug in Pager
-
-2.2	Houma		KSP		r122 (smswork)	added LEGAL notice
-							removed Assert classes
-							stop paging on page response
-							fixed Pager-spin bug
-							fixed Transceiver spin bugs
-							fixed 2^32 microsecond rollover bug
-							reduced stack footprints in Transceiver
-							fixed SMS timestamps
-							check LAI before using TMSI in LUR
-							reduced memory requirement by 75%
-							removed PagerTest
-							fixed stale-transaction bug in paging handler
-							fixed USRP clock rollover bug
-							faster call connection
-							new USRPDevice design
-
-2.3	Jean Lafitte	KSP		r190? (trunk)	check for out-of-date RACH bursts
-							better TRX-GSM clock sync
-							formal logging system
-							command line interface
-							emergency call setup
-
-2.4	Kinder		KSP		r208? (trunk)	fixed BCCH neighbor list bug
-							support for neighbor lists
-							fixed support for non-local Asterisk servers
-							cleaner configuration management
-							more realtime control of BCCH parameters
-							proper rejection of Hold messages
-							fixed L3 hanging bug in MTDCheckBYE
-
-2.4.1	Kinder		KSP		r462		fixed lots of valgrind errors
-
-2.4.2	Kinder		KSP		r482		zero-length calling party number bug
-							g++ 4.4 #includes
-
-2.5	Lacassine	KSP		r551		imported Joshua Lackey patches
-							SIP fixes from Anne Kwong
-							SIP fixes from testing with SMS server
-							L3 TI handling fixes
-							SMS server support
-							GNU Radio 3.2 compatibility
-							configurable max range and LU-reject cause
-							"page" & "testcall" CLI features
-
-2.5.1	Lacassine	KSP		r595		fixed some build bugs for some Linux distros
-
-2.5.2	Lacassine	KSP		r630		fixed channel assignment bug for Nokia DCT4+ handsets
-
-2.5.3	Lacassine	KSP		r756		merged fix for transceiver startup crash
-								due to use of uninitialized variables (r646)
-							merged fix for fusb bug from trunk (r582)
-
-2.5.4	Lacassine	KSP		r812		merged fixes to build under latest Fedora and
-								to build with git GnuRadio (r814)
-
-2.6	Mamou		KSP		r886		fixed infamous fusb bug (r582)
-							fixed idle-filling table size bug
-							smoother uplink power control
-							load-limiting downlink power control
-							new "config" features (optional, static)
-							IMEI interrogation
-							fixed MOD "missing FIFO" bug
-							configurable short code features
-							fixed transceiver startup crash (r646)
-							readline support is back
-							fixed timing advance bug (r844)
-							added CLI "chans" command
-							track time-of-use in TMSI table (r844)
-							added CLI "noise" command (r844)
-							added CLI "rxpower" command (r844)
-							added CLI "unconfig" command
-
-2.7	Natchitoches	Range	rxxx			(never released publicly)
-							converted TMSITable to sqlite3 (r902)
-							sqlite3-based configuration (r???)
-							converted Logger to syslogd (r903)
-							added support for rest octets (r1022)
-							external database for transaction reporting (r1184)
-							external database for channel status reporting (r1203)
-							in-call delivery and submission of text messages (r1231)
-							RFC-2833 DMTF (r1249)
-
-2.8	Opelousas	Range	rxxx			move databases to /etc and /var
-							RRLP aiding support
-
-

Transceiver52M/Resampler.cpp

@@ -175,8 +175,13 @@ int Resampler::rotate(float *in, size_t in_len, float *out, size_t out_len)
 	if (!check_vec_len(in_len, out_len, p, q))
 		return -1;
 
-	/* Insert history */
-	memcpy(&in[-2 * hist_len], history, hist_len * 2 * sizeof(float));
+	if (history_on) {
+		memcpy(&in[-2 * hist_len],
+		       history, hist_len * 2 * sizeof(float));
+	} else {
+		memset(&in[-2 * hist_len], 0,
+		       hist_len * 2 * sizeof(float));
+	}
 
 	/* Generate output from precomputed input/output paths */
 	for (size_t i = 0; i < out_len; i++) {
@@ -190,8 +195,10 @@ int Resampler::rotate(float *in, size_t in_len, float *out, size_t out_len)
 	}
 
 	/* Save history */
+	if (history_on) {
 		memcpy(history, &in[2 * (in_len - hist_len)],
 		       hist_len * 2 * sizeof(float));
+	}
 
 	return out_len;
 }
@@ -221,8 +228,14 @@ size_t Resampler::len()
 	return filt_len;
 }
 
+void Resampler::enableHistory(bool on)
+{
+	history_on = on;
+}
+
 Resampler::Resampler(size_t p, size_t q, size_t filt_len)
-	: in_index(NULL), out_path(NULL), partitions(NULL), history(NULL)
+	: in_index(NULL), out_path(NULL), partitions(NULL),
+	  history(NULL), history_on(true)
 {
 	this->p = p;
 	this->q = q;

Transceiver52M/Resampler.h

@@ -59,6 +59,11 @@ public:
 	 */
 	size_t len();
 
+	/*
+	 * Enable/disable history 
+	 */
+	void enableHistory(bool on);
+
 private:
 	size_t p;
 	size_t q;
@@ -68,6 +73,7 @@ private:
 
 	float **partitions;
 	float *history;
+	bool history_on;
 
 	bool initFilters(float bw);
 	void releaseFilters();

Transceiver52M/Transceiver.cpp

@@ -22,6 +22,8 @@
 */
 
 #include <stdio.h>
+#include <iomanip>      // std::setprecision
+#include <fstream>
 #include "Transceiver.h"
 #include <Logger.h>
 
@@ -43,7 +45,7 @@ using namespace GSM;
 #define NOISE_CNT			20
 
 TransceiverState::TransceiverState()
-  : mRetrans(false), mNoiseLev(0.0), mNoises(NOISE_CNT)
+  : mRetrans(false), mNoiseLev(0.0), mNoises(NOISE_CNT), mPower(0.0)
 {
   for (int i = 0; i < 8; i++) {
     chanType[i] = Transceiver::NONE;
@@ -69,75 +71,111 @@ TransceiverState::~TransceiverState()
   }
 }
 
-void TransceiverState::init(size_t slot, signalVector *burst, bool fill)
+bool TransceiverState::init(int filler, size_t sps, float scale, size_t rtsc)
 {
-  signalVector *filler;
+  signalVector *burst;
 
-  for (int i = 0; i < 102; i++) {
-    if (fill)
-      filler = new signalVector(*burst);
-    else
-      filler = new signalVector(burst->size());
+  if ((sps != 1) && (sps != 4))
+    return false;
 
-    fillerTable[i][slot] = filler;
+  for (size_t n = 0; n < 8; n++) {
+    for (size_t i = 0; i < 102; i++) {
+      switch (filler) {
+      case Transceiver::FILLER_DUMMY:
+        burst = generateDummyBurst(sps, n);
+        break;
+      case Transceiver::FILLER_NORM_RAND:
+        burst = genRandNormalBurst(rtsc, sps, n);
+        break;
+      case Transceiver::FILLER_EDGE_RAND:
+        burst = generateEdgeBurst(rtsc);
+        break;
+      case Transceiver::FILLER_ACCESS_RAND:
+        burst = genRandAccessBurst(sps, n);
+        break;
+      case Transceiver::FILLER_ZERO:
+      default:
+        burst = generateEmptyBurst(sps, n);
       }
+
+      scaleVector(*burst, scale);
+      fillerTable[i][n] = burst;
+    }
+
+    if ((filler == Transceiver::FILLER_NORM_RAND) ||
+        (filler == Transceiver::FILLER_EDGE_RAND)) {
+        chanType[n] = Transceiver::TSC;
+    }
+  }
+
+  return false;
 }
 
 Transceiver::Transceiver(int wBasePort,
-			 const char *TRXAddress,
-			 size_t wSPS, size_t wChans,
+                         const char *wTRXAddress,
+                         size_t tx_sps, size_t rx_sps, size_t chans,
                          GSM::Time wTransmitLatency,
-			 RadioInterface *wRadioInterface)
-  : mBasePort(wBasePort), mAddr(TRXAddress),
-    mTransmitLatency(wTransmitLatency), mClockSocket(NULL),
-    mRadioInterface(wRadioInterface), mSPSTx(wSPS), mSPSRx(1), mChans(wChans),
-    mOn(false), mTxFreq(0.0), mRxFreq(0.0), mPower(-10), mMaxExpectedDelay(0)
+                         RadioInterface *wRadioInterface,
+                         double wRssiOffset)
+  : mBasePort(wBasePort), mAddr(wTRXAddress),
+    mClockSocket(wBasePort, wTRXAddress, mBasePort + 100),
+    mTransmitLatency(wTransmitLatency), mRadioInterface(wRadioInterface),
+    rssiOffset(wRssiOffset),
+    mSPSTx(tx_sps), mSPSRx(rx_sps), mChans(chans), mOn(false),
+    mTxFreq(0.0), mRxFreq(0.0), mTSC(0), mMaxExpectedDelayAB(0), mMaxExpectedDelayNB(0),
+    mWriteBurstToDiskMask(0)
 {
-  GSM::Time startTime(random() % gHyperframe,0);
-
-  mRxLowerLoopThread = new Thread(32768);
-  mTxLowerLoopThread = new Thread(32768);
-
-  mTransmitDeadlineClock = startTime;
-  mLastClockUpdateTime = startTime;
-  mLatencyUpdateTime = startTime;
-  mRadioInterface->getClock()->set(startTime);
-
   txFullScale = mRadioInterface->fullScaleInputValue();
   rxFullScale = mRadioInterface->fullScaleOutputValue();
+
+  for (int i = 0; i < 8; i++) {
+    for (int j = 0; j < 8; j++)
+      mHandover[i][j] = false;
+  }
 }
 
 Transceiver::~Transceiver()
 {
+  stop();
+
   sigProcLibDestroy();
 
-  delete mClockSocket;
-
   for (size_t i = 0; i < mChans; i++) {
+    mControlServiceLoopThreads[i]->cancel();
+    mControlServiceLoopThreads[i]->join();
+    delete mControlServiceLoopThreads[i];
+
     mTxPriorityQueues[i].clear();
     delete mCtrlSockets[i];
     delete mDataSockets[i];
   }
 }
 
-bool Transceiver::init(bool filler)
+/*
+ * Initialize transceiver
+ *
+ * Start or restart the control loop. Any further control is handled through the
+ * socket API. Randomize the central radio clock set the downlink burst
+ * counters. Note that the clock will not update until the radio starts, but we
+ * are still expected to report clock indications through control channel
+ * activity.
+ */
+bool Transceiver::init(int filler, size_t rtsc)
 {
   int d_srcport, d_dstport, c_srcport, c_dstport;
-  signalVector *burst;
 
   if (!mChans) {
     LOG(ALERT) << "No channels assigned";
     return false;
   }
 
-  if (!sigProcLibSetup(mSPSTx)) {
+  if (!sigProcLibSetup()) {
     LOG(ALERT) << "Failed to initialize signal processing library";
     return false;
   }
 
   mDataSockets.resize(mChans);
   mCtrlSockets.resize(mChans);
-
   mControlServiceLoopThreads.resize(mChans);
   mTxPriorityQueueServiceLoopThreads.resize(mChans);
   mRxServiceLoopThreads.resize(mChans);
@@ -147,11 +185,10 @@ bool Transceiver::init(bool filler)
   mStates.resize(mChans);
 
   /* Filler table retransmissions - support only on channel 0 */
-  if (filler)
+  if (filler == FILLER_DUMMY)
     mStates[0].mRetrans = true;
 
-  mClockSocket = new UDPSocket(mBasePort, mAddr.c_str(), mBasePort + 100);
-
+  /* Setup sockets */
   for (size_t i = 0; i < mChans; i++) {
     c_srcport = mBasePort + 2 * i + 1;
     c_dstport = mBasePort + 2 * i + 101;
@@ -162,22 +199,129 @@ bool Transceiver::init(bool filler)
     mDataSockets[i] = new UDPSocket(d_srcport, mAddr.c_str(), d_dstport);
   }
 
-  for (size_t i = 0; i < mChans; i++) {
-    mControlServiceLoopThreads[i] = new Thread(32768);
-    mTxPriorityQueueServiceLoopThreads[i] = new Thread(32768);
-    mRxServiceLoopThreads[i] = new Thread(32768);
+  /* Randomize the central clock */
+  GSM::Time startTime(random() % gHyperframe, 0);
+  mRadioInterface->getClock()->set(startTime);
+  mTransmitDeadlineClock = startTime;
+  mLastClockUpdateTime = startTime;
+  mLatencyUpdateTime = startTime;
 
-    for (size_t n = 0; n < 8; n++) {
-      burst = modulateBurst(gDummyBurst, 8 + (n % 4 == 0), mSPSTx);
-      scaleVector(*burst, txFullScale);
-      mStates[i].init(n, burst, filler && !i);
-      delete burst;
-    }
+  /* Start control threads */
+  for (size_t i = 0; i < mChans; i++) {
+    TransceiverChannel *chan = new TransceiverChannel(this, i);
+    mControlServiceLoopThreads[i] = new Thread(32768);
+    mControlServiceLoopThreads[i]->start((void * (*)(void*))
+                                 ControlServiceLoopAdapter, (void*) chan);
+
+    if (i && filler == FILLER_DUMMY)
+      filler = FILLER_ZERO;
+
+    mStates[i].init(filler, mSPSTx, txFullScale, rtsc);
   }
 
   return true;
 }
 
+/*
+ * Start the transceiver
+ *
+ * Submit command(s) to the radio device to commence streaming samples and
+ * launch threads to handle sample I/O. Re-synchronize the transmit burst
+ * counters to the central radio clock here as well.
+ */
+bool Transceiver::start()
+{
+  ScopedLock lock(mLock);
+
+  if (mOn) {
+    LOG(ERR) << "Transceiver already running";
+    return true;
+  }
+
+  LOG(NOTICE) << "Starting the transceiver";
+
+  GSM::Time time = mRadioInterface->getClock()->get();
+  mTransmitDeadlineClock = time;
+  mLastClockUpdateTime = time;
+  mLatencyUpdateTime = time;
+
+  if (!mRadioInterface->start()) {
+    LOG(ALERT) << "Device failed to start";
+    return false;
+  }
+
+  /* Device is running - launch I/O threads */
+  mRxLowerLoopThread = new Thread(32768);
+  mTxLowerLoopThread = new Thread(32768);
+  mTxLowerLoopThread->start((void * (*)(void*))
+                            TxLowerLoopAdapter,(void*) this);
+  mRxLowerLoopThread->start((void * (*)(void*))
+                            RxLowerLoopAdapter,(void*) this);
+
+  /* Launch uplink and downlink burst processing threads */
+  for (size_t i = 0; i < mChans; i++) {
+    TransceiverChannel *chan = new TransceiverChannel(this, i);
+    mRxServiceLoopThreads[i] = new Thread(32768);
+    mRxServiceLoopThreads[i]->start((void * (*)(void*))
+                            RxUpperLoopAdapter, (void*) chan);
+
+    chan = new TransceiverChannel(this, i);
+    mTxPriorityQueueServiceLoopThreads[i] = new Thread(32768);
+    mTxPriorityQueueServiceLoopThreads[i]->start((void * (*)(void*))
+                            TxUpperLoopAdapter, (void*) chan);
+  }
+
+  writeClockInterface();
+  mOn = true;
+  return true;
+}
+
+/*
+ * Stop the transceiver
+ *
+ * Perform stopping by disabling receive streaming and issuing cancellation
+ * requests to running threads. Most threads will timeout and terminate once
+ * device is disabled, but the transmit loop may block waiting on the central
+ * UMTS clock. Explicitly signal the clock to make sure that the transmit loop
+ * makes it to the thread cancellation point.
+ */
+void Transceiver::stop()
+{
+  ScopedLock lock(mLock);
+
+  if (!mOn)
+    return;
+
+  LOG(NOTICE) << "Stopping the transceiver";
+  mTxLowerLoopThread->cancel();
+  mRxLowerLoopThread->cancel();
+
+  for (size_t i = 0; i < mChans; i++) {
+    mRxServiceLoopThreads[i]->cancel();
+    mTxPriorityQueueServiceLoopThreads[i]->cancel();
+  }
+
+  LOG(INFO) << "Stopping the device";
+  mRadioInterface->stop();
+
+  for (size_t i = 0; i < mChans; i++) {
+    mRxServiceLoopThreads[i]->join();
+    mTxPriorityQueueServiceLoopThreads[i]->join();
+    delete mRxServiceLoopThreads[i];
+    delete mTxPriorityQueueServiceLoopThreads[i];
+
+    mTxPriorityQueues[i].clear();
+  }
+
+  mTxLowerLoopThread->join();
+  mRxLowerLoopThread->join();
+  delete mTxLowerLoopThread;
+  delete mRxLowerLoopThread;
+
+  mOn = false;
+  LOG(NOTICE) << "Transceiver stopped";
+}
+
 void Transceiver::addRadioVector(size_t chan, BitVector &bits,
                                  int RSSI, GSM::Time &wTime)
 {
@@ -194,7 +338,12 @@ void Transceiver::addRadioVector(size_t chan, BitVector &bits,
     return;
   }
 
+  /* Use the number of bits as the EDGE burst indicator */
+  if (bits.size() == EDGE_BURST_NBITS)
+    burst = modulateEdgeBurst(bits, mSPSTx);
+  else
     burst = modulateBurst(bits, 8 + (wTime.TN() % 4 == 0), mSPSTx);
+
   scaleVector(*burst, txFullScale * pow(10, -RSSI / 10));
 
   radio_burst = new radioVector(wTime, burst);
@@ -295,9 +444,15 @@ void Transceiver::setModulus(size_t timeslot, size_t chan)
 Transceiver::CorrType Transceiver::expectedCorrType(GSM::Time currTime,
                                                     size_t chan)
 {
+  static int tchh_subslot[26] = { 0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,0,1,0,1,0,1,0,1,0,1,1 };
+  static int sdcch4_subslot[102] = { 3,3,3,3,0,0,2,2,2,2,3,3,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,0,0,2,2,2,2,
+                                     3,3,3,3,0,0,0,0,0,0,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,0,0,2,2,2,2 };
+  static int sdcch8_subslot[102] = { 5,5,5,5,6,6,6,6,7,7,7,7,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,6,6,6,6,7,7,7,7,0,0,0,0,
+                                     1,1,1,1,2,2,2,2,3,3,3,3,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,6,6,6,6,7,7,7,7,4,4,4,4 };
   TransceiverState *state = &mStates[chan];
   unsigned burstTN = currTime.TN();
   unsigned burstFN = currTime.FN();
+  int subch;
 
   switch (state->chanType[burstTN]) {
   case NONE:
@@ -307,16 +462,25 @@ Transceiver::CorrType Transceiver::expectedCorrType(GSM::Time currTime,
     return IDLE;
     break;
   case I:
-    return TSC;
+    // TODO: Are we expecting RACH on an IDLE frame?
 /*    if (burstFN % 26 == 25)
-      return IDLE;
-    else
-      return TSC;*/
+      return IDLE;*/
+    if (mHandover[burstTN][0])
+      return RACH;
+    return TSC;
     break;
   case II:
+    subch = tchh_subslot[burstFN % 26];
+    if (subch == 1)
+      return IDLE;
+    if (mHandover[burstTN][0])
+      return RACH;
     return TSC;
     break;
   case III:
+    subch = tchh_subslot[burstFN % 26];
+    if (mHandover[burstTN][subch])
+      return RACH;
     return TSC;
     break;
   case IV:
@@ -331,6 +495,8 @@ Transceiver::CorrType Transceiver::expectedCorrType(GSM::Time currTime,
       return RACH;
     else if ((mod51 == 45) || (mod51 == 46))
       return RACH;
+    else if (mHandover[burstTN][sdcch4_subslot[burstFN % 102]])
+      return RACH;
     else
       return TSC;
     break;
@@ -338,6 +504,8 @@ Transceiver::CorrType Transceiver::expectedCorrType(GSM::Time currTime,
   case VII:
     if ((burstFN % 51 <= 14) && (burstFN % 51 >= 12))
       return IDLE;
+    else if (mHandover[burstTN][sdcch8_subslot[burstFN % 102]])
+      return RACH;
     else
       return TSC;
     break;
@@ -363,104 +531,77 @@ Transceiver::CorrType Transceiver::expectedCorrType(GSM::Time currTime,
   }
 }
 
-/* 
- * Detect RACH synchronization sequence within a burst. No equalization
- * is used or available on the RACH channel.
- */
-bool Transceiver::detectRACH(TransceiverState *state,
-                             signalVector &burst,
-                             complex &amp, float &toa)
+int Transceiver::detectBurst(signalVector &burst,
+                             complex &amp, float &toa, CorrType type)
 {
-  float threshold = 6.0;
+  float threshold = 5.0, rc = 0;
 
-  return detectRACHBurst(burst, threshold, mSPSRx, &amp, &toa);
+  switch (type) {
+  case EDGE:
+    rc = detectEdgeBurst(burst, mTSC, threshold, mSPSRx,
+                         amp, toa, mMaxExpectedDelayNB);
+    if (rc > 0)
+      break;
+    else
+      type = TSC;
+  case TSC:
+    rc = analyzeTrafficBurst(burst, mTSC, threshold, mSPSRx,
+                             amp, toa, mMaxExpectedDelayNB);
+    break;
+  case RACH:
+    threshold = 6.0;
+    rc = detectRACHBurst(burst, threshold, mSPSRx, amp, toa,
+                         mMaxExpectedDelayAB);
+    break;
+  default:
+    LOG(ERR) << "Invalid correlation type";
   }
 
+  if (rc > 0)
+    return type;
+
+  return rc;
+}
+
+
 /*
- * Detect normal burst training sequence midamble. Update equalization
- * state information and channel estimate if necessary. Equalization
- * is currently disabled.
+ * Demodulate GMSK by direct rotation and soft slicing.
  */
-bool Transceiver::detectTSC(TransceiverState *state, signalVector &burst,
-                            complex &amp, float &toa, GSM::Time &time)
+SoftVector *Transceiver::demodulate(signalVector &burst, complex amp,
+                                    float toa, CorrType type)
 {
-  int tn = time.TN();
-  float chanOffset, threshold = 5.0;
-  bool noise, needDFE = false, estimateChan = false;
-  double elapsed = time - state->chanEstimateTime[tn];
-  signalVector *chanResp;
-
-  /* Check equalization update state */
-  if (needDFE && ((elapsed > 50) || (!state->chanResponse[tn]))) {
-    delete state->DFEForward[tn];
-    delete state->DFEFeedback[tn];
-    state->DFEForward[tn] = NULL;
-    state->DFEFeedback[tn] = NULL;
-
-    estimateChan = true;
-  }
-
-  /* Detect normal burst midambles */
-  if (!analyzeTrafficBurst(burst, mTSC, threshold, mSPSRx, &amp,
-                           &toa, mMaxExpectedDelay, estimateChan,
-                           &chanResp, &chanOffset)) {
-    return false;
-  }
-
-  noise = state->mNoiseLev;
-  state->SNRestimate[tn] = amp.norm2() / (noise * noise + 1.0);
-
-  /* Set equalizer if unabled */
-  if (needDFE && estimateChan) {
-     state->chanResponse[tn] = chanResp;
-     state->chanRespOffset[tn] = chanOffset;
-     state->chanRespAmplitude[tn] = amp;
-
-     scaleVector(*chanResp, complex(1.0, 0.0) / amp);
-
-     designDFE(*chanResp, state->SNRestimate[tn],
-               7, &state->DFEForward[tn], &state->DFEFeedback[tn]);
-
-     state->chanEstimateTime[tn] = time;
-  }
-
-  return true;;
-}
-
-/*
- * Demodulate GMSK burst using equalization if requested. Otherwise
- * demodulate by direct rotation and soft slicing.
- */
-SoftVector *Transceiver::demodulate(TransceiverState *state,
-                                    signalVector &burst, complex amp,
-                                    float toa, size_t tn, bool equalize)
-{
-  if (equalize) {
-    scaleVector(burst, complex(1.0, 0.0) / amp);
-    return equalizeBurst(burst,
-                         toa - state->chanRespOffset[tn],
-                         mSPSRx,
-                         *state->DFEForward[tn],
-                         *state->DFEFeedback[tn]);
-  }
+  if (type == EDGE)
+	  return demodEdgeBurst(burst, mSPSRx, amp, toa);
 
   return demodulateBurst(burst, mSPSRx, amp, toa);
 }
 
+void writeToFile(radioVector *radio_burst, size_t chan)
+{
+  GSM::Time time = radio_burst->getTime();
+  std::ostringstream fname;
+  fname << chan << "_" << time.FN() << "_" << time.TN() << ".fc";
+  std::ofstream outfile (fname.str().c_str(), std::ofstream::binary);
+  outfile.write((char*)radio_burst->getVector()->begin(), radio_burst->getVector()->size() * 2 * sizeof(float));
+  outfile.close();
+}
+
 /*
  * Pull bursts from the FIFO and handle according to the slot
  * and burst correlation type. Equalzation is currently disabled. 
  */
-SoftVector *Transceiver::pullRadioVector(GSM::Time &wTime, int &RSSI,
-                                         int &timingOffset, size_t chan)
+SoftVector *Transceiver::pullRadioVector(GSM::Time &wTime, double &RSSI, bool &isRssiValid,
+                                         double &timingOffset, double &noise,
+                                         size_t chan)
 {
-  bool success, equalize = false;
+  int rc;
   complex amp;
   float toa, pow, max = -1.0, avg = 0.0;
   int max_i = -1;
   signalVector *burst;
   SoftVector *bits = NULL;
   TransceiverState *state = &mStates[chan];
+  isRssiValid = false;
 
   /* Blocking FIFO read */
   radioVector *radio_burst = mReceiveFIFO[chan]->read();
@@ -471,7 +612,15 @@ SoftVector *Transceiver::pullRadioVector(GSM::Time &wTime, int &RSSI,
   GSM::Time time = radio_burst->getTime();
   CorrType type = expectedCorrType(time, chan);
 
-  if ((type == OFF) || (type == IDLE)) {
+  /* Debug: dump bursts to disk */
+  /* bits 0-7  - chan 0 timeslots
+   * bits 8-15 - chan 1 timeslots */
+  if (mWriteBurstToDiskMask & ((1<<time.TN()) << (8*chan)))
+    writeToFile(radio_burst, chan);
+
+  /* No processing if the timeslot is off.
+   * Not even power level or noise calculation. */
+  if (type == OFF) {
     delete radio_burst;
     return NULL;
   }
@@ -495,47 +644,50 @@ SoftVector *Transceiver::pullRadioVector(GSM::Time &wTime, int &RSSI,
   /* Average noise on diversity paths and update global levels */
   burst = radio_burst->getVector(max_i);
   avg = sqrt(avg / radio_burst->chans());
+
+  wTime = time;
+  RSSI = 20.0 * log10(rxFullScale / avg);
+
+  /* RSSI estimation are valid */
+  isRssiValid = true;
+
+  if (type == IDLE) {
+    /* Update noise levels */
+    state->mNoises.insert(avg);
     state->mNoiseLev = state->mNoises.avg();
+    noise = 20.0 * log10(rxFullScale / state->mNoiseLev);
+
+    delete radio_burst;
+    return NULL;
+  } else {
+    /* Do not update noise levels */
+    noise = 20.0 * log10(rxFullScale / state->mNoiseLev);
+  }
 
   /* Detect normal or RACH bursts */
-  if (type == TSC)
-    success = detectTSC(state, *burst, amp, toa, time);
-  else
-    success = detectRACH(state, *burst, amp, toa);
+  rc = detectBurst(*burst, amp, toa, type);
+
+  if (rc > 0) {
+    type = (CorrType) rc;
+  } else if (rc <= 0) {
+    if (rc == -SIGERR_CLIP) {
+      LOG(WARNING) << "Clipping detected on received RACH or Normal Burst";
+    } else if (rc != SIGERR_NONE) {
+      LOG(WARNING) << "Unhandled RACH or Normal Burst detection error";
+    }
 
-  if (!success) {
-    state->mNoises.insert(avg);
     delete radio_burst;
     return NULL;
   }
 
-  /* Demodulate and set output info */
-  if (equalize && (type != TSC))
-    equalize = false;
+  timingOffset = toa / mSPSRx;
 
-  if (avg - state->mNoiseLev > 0.0)
-    bits = demodulate(state, *burst, amp, toa, time.TN(), equalize);
-
-  wTime = time;
-  RSSI = (int) floor(20.0 * log10(rxFullScale / avg));
-  timingOffset = (int) round(toa * 256.0 / mSPSRx);
+  bits = demodulate(*burst, amp, toa, type);
 
   delete radio_burst;
-
   return bits;
 }
 
-void Transceiver::start()
-{
-  TransceiverChannel *chan;
-
-  for (size_t i = 0; i < mControlServiceLoopThreads.size(); i++) {
-    chan = new TransceiverChannel(this, i);
-    mControlServiceLoopThreads[i]->start((void * (*)(void*))
-                                 ControlServiceLoopAdapter, (void*) chan);
-  }
-}
-
 void Transceiver::reset()
 {
   for (size_t i = 0; i < mTxPriorityQueues.size(); i++)
@@ -552,7 +704,7 @@ void Transceiver::driveControl(size_t chan)
   int msgLen = -1;
   buffer[0] = '\0';
 
-  msgLen = mCtrlSockets[chan]->read(buffer);
+  msgLen = mCtrlSockets[chan]->read(buffer, sizeof(buffer));
 
   if (msgLen < 1) {
     return;
@@ -574,48 +726,47 @@ void Transceiver::driveControl(size_t chan)
   LOG(INFO) << "command is " << buffer;
 
   if (strcmp(command,"POWEROFF")==0) {
-    // turn off transmitter/demod
+    stop();
     sprintf(response,"RSP POWEROFF 0");
   }
   else if (strcmp(command,"POWERON")==0) {
-    // turn on transmitter/demod
-    if (!mTxFreq || !mRxFreq) 
+    if (!start())
       sprintf(response,"RSP POWERON 1");
-    else {
+    else
       sprintf(response,"RSP POWERON 0");
-      if (!chan && !mOn) {
-        // Prepare for thread start
-        mPower = -20;
-        mRadioInterface->start();
-
-        // Start radio interface threads.
-        mTxLowerLoopThread->start((void * (*)(void*))
-                                  TxLowerLoopAdapter,(void*) this);
-        mRxLowerLoopThread->start((void * (*)(void*))
-                                  RxLowerLoopAdapter,(void*) this);
-
-        for (size_t i = 0; i < mChans; i++) {
-          TransceiverChannel *chan = new TransceiverChannel(this, i);
-          mRxServiceLoopThreads[i]->start((void * (*)(void*))
-                                  RxUpperLoopAdapter, (void*) chan);
-
-          chan = new TransceiverChannel(this, i);
-          mTxPriorityQueueServiceLoopThreads[i]->start((void * (*)(void*))
-                                  TxUpperLoopAdapter, (void*) chan);
-        }
-
-        writeClockInterface();
-        mOn = true;
+      for (int i = 0; i < 8; i++) {
+        for (int j = 0; j < 8; j++)
+          mHandover[i][j] = false;
       }
   }
+  else if (strcmp(command,"HANDOVER")==0){
+    int ts=0,ss=0;
+    sscanf(buffer,"%3s %s %d %d",cmdcheck,command,&ts,&ss);
+    mHandover[ts][ss] = true;
+    LOG(WARNING) << "HANDOVER RACH at timeslot " << ts << " subslot " << ss;
+    sprintf(response,"RSP HANDOVER 0 %d %d",ts,ss);
+  }
+  else if (strcmp(command,"NOHANDOVER")==0){
+    int ts=0,ss=0;
+    sscanf(buffer,"%3s %s %d %d",cmdcheck,command,&ts,&ss);
+    mHandover[ts][ss] = false;
+    LOG(WARNING) << "NOHANDOVER at timeslot " << ts << " subslot " << ss;
+    sprintf(response,"RSP NOHANDOVER 0 %d %d",ts,ss);
   }
   else if (strcmp(command,"SETMAXDLY")==0) {
     //set expected maximum time-of-arrival
     int maxDelay;
     sscanf(buffer,"%3s %s %d",cmdcheck,command,&maxDelay);
-    mMaxExpectedDelay = maxDelay; // 1 GSM symbol is approx. 1 km
+    mMaxExpectedDelayAB = maxDelay; // 1 GSM symbol is approx. 1 km
     sprintf(response,"RSP SETMAXDLY 0 %d",maxDelay);
   }
+  else if (strcmp(command,"SETMAXDLYNB")==0) {
+    //set expected maximum time-of-arrival
+    int maxDelay;
+    sscanf(buffer,"%3s %s %d",cmdcheck,command,&maxDelay);
+    mMaxExpectedDelayNB = maxDelay; // 1 GSM symbol is approx. 1 km
+    sprintf(response,"RSP SETMAXDLYNB 0 %d",maxDelay);
+  }
   else if (strcmp(command,"SETRXGAIN")==0) {
     //set expected maximum time-of-arrival
     int newGain;
@@ -634,28 +785,19 @@ void Transceiver::driveControl(size_t chan)
     }
   }
   else if (!strcmp(command, "SETPOWER")) {
-    // set output power in dB
-    int dbPwr;
-    sscanf(buffer, "%3s %s %d", cmdcheck, command, &dbPwr);
-    if (!mOn)
-      sprintf(response, "RSP SETPOWER 1 %d", dbPwr);
-    else {
-      mPower = dbPwr;
-      mRadioInterface->setPowerAttenuation(mPower, chan);
-      sprintf(response, "RSP SETPOWER 0 %d", dbPwr);
-    }
+    int power;
+    sscanf(buffer, "%3s %s %d", cmdcheck, command, &power);
+    power = mRadioInterface->setPowerAttenuation(power, chan);
+    mStates[chan].mPower = power;
+    sprintf(response, "RSP SETPOWER 0 %d", power);
   }
   else if (!strcmp(command,"ADJPOWER")) {
-    // adjust power in dB steps
-    int dbStep;
-    sscanf(buffer, "%3s %s %d", cmdcheck, command, &dbStep);
-    if (!mOn)
-      sprintf(response, "RSP ADJPOWER 1 %d", mPower);
-    else {
-      mPower += dbStep;
-      mRadioInterface->setPowerAttenuation(mPower, chan);
-      sprintf(response, "RSP ADJPOWER 0 %d", mPower);
-    }
+    int power, step;
+    sscanf(buffer, "%3s %s %d", cmdcheck, command, &step);
+    power = mStates[chan].mPower + step;
+    power = mRadioInterface->setPowerAttenuation(power, chan);
+    mStates[chan].mPower = power;
+    sprintf(response, "RSP ADJPOWER 0 %d", power);
   }
   else if (strcmp(command,"RXTUNE")==0) {
     // tune receiver
@@ -685,18 +827,17 @@ void Transceiver::driveControl(size_t chan)
     // set TSC
     unsigned TSC;
     sscanf(buffer, "%3s %s %d", cmdcheck, command, &TSC);
-    if (mOn)
+    if (mOn || (TSC < 0) || (TSC > 7))
       sprintf(response, "RSP SETTSC 1 %d", TSC);
     else if (chan && (TSC != mTSC))
       sprintf(response, "RSP SETTSC 1 %d", TSC);
     else {
       mTSC = TSC;
-      generateMidamble(mSPSRx, TSC);
       sprintf(response,"RSP SETTSC 0 %d", TSC);
     }
   }
   else if (strcmp(command,"SETSLOT")==0) {
-    // set TSC 
+    // set slot type
     int  corrCode;
     int  timeslot;
     sscanf(buffer,"%3s %s %d %d",cmdcheck,command,&timeslot,&corrCode);
@@ -710,8 +851,17 @@ void Transceiver::driveControl(size_t chan)
     sprintf(response,"RSP SETSLOT 0 %d %d",timeslot,corrCode);
 
   }
+  else if (strcmp(command,"_SETBURSTTODISKMASK")==0) {
+    // debug command! may change or disapear without notice
+    // set a mask which bursts to dump to disk
+    int mask;
+    sscanf(buffer,"%3s %s %d",cmdcheck,command,&mask);
+    mWriteBurstToDiskMask = mask;
+    sprintf(response,"RSP _SETBURSTTODISKMASK 0 %d",mask);
+  }
   else {
     LOG(WARNING) << "bogus command " << command << " on control interface.";
+    sprintf(response,"RSP ERR 1");
   }
 
   mCtrlSockets[chan]->write(response, strlen(response) + 1);
@@ -722,7 +872,7 @@ bool Transceiver::driveTxPriorityQueue(size_t chan)
   char buffer[gSlotLen+50];
 
   // check data socket
-  size_t msgLen = mDataSockets[chan]->read(buffer);
+  size_t msgLen = mDataSockets[chan]->read(buffer, sizeof(buffer));
 
   if (msgLen!=gSlotLen+1+4+1) {
     LOG(ERR) << "badly formatted packet on GSM->TRX interface";
@@ -734,15 +884,6 @@ bool Transceiver::driveTxPriorityQueue(size_t chan)
   for (int i = 0; i < 4; i++)
     frameNum = (frameNum << 8) | (0x0ff & buffer[i+1]);
 
-  // periodically update GSM core clock
-  LOG(DEBUG) << "mTransmitDeadlineClock " << mTransmitDeadlineClock
-		<< " mLastClockUpdateTime " << mLastClockUpdateTime;
-
-  if (!chan) {
-    if (mTransmitDeadlineClock > mLastClockUpdateTime + GSM::Time(216,0))
-      writeClockInterface();
-  }
-
   LOG(DEBUG) << "rcvd. burst at: " << GSM::Time(frameNum,timeSlot);
   
   int RSSI = (int) buffer[5];
@@ -763,44 +904,70 @@ bool Transceiver::driveTxPriorityQueue(size_t chan)
 
 void Transceiver::driveReceiveRadio()
 {
-  if (!mRadioInterface->driveReceiveRadio())
+  if (!mRadioInterface->driveReceiveRadio()) {
     usleep(100000);
+  } else {
+    if (mTransmitDeadlineClock > mLastClockUpdateTime + GSM::Time(216,0))
+      writeClockInterface();
+  }
+}
+
+void Transceiver::logRxBurst(SoftVector *burst, GSM::Time time, double dbm,
+                             double rssi, double noise, double toa)
+{
+  LOG(DEBUG) << std::fixed << std::right
+    << " time: "   << time
+    << " RSSI: "   << std::setw(5) << std::setprecision(1) << rssi
+                   << "dBFS/" << std::setw(6) << -dbm << "dBm"
+    << " noise: "  << std::setw(5) << std::setprecision(1) << noise
+                   << "dBFS/" << std::setw(6) << -(noise + rssiOffset) << "dBm"
+    << " TOA: "    << std::setw(5) << std::setprecision(2) << toa
+    << " bits: "   << *burst;
 }
 
 void Transceiver::driveReceiveFIFO(size_t chan)
 {
   SoftVector *rxBurst = NULL;
-  int RSSI;
-  int TOA;  // in 1/256 of a symbol
+  double RSSI; // in dBFS
+  double dBm;  // in dBm
+  double TOA;  // in symbols
+  int TOAint;  // in 1/256 symbols
+  double noise; // noise level in dBFS
   GSM::Time burstTime;
+  bool isRssiValid; // are RSSI, noise and burstTime valid
+  unsigned nbits = gSlotLen;
 
-  rxBurst = pullRadioVector(burstTime, RSSI, TOA, chan);
+  rxBurst = pullRadioVector(burstTime, RSSI, isRssiValid, TOA, noise, chan);
+  if (!rxBurst)
+    return;
 
-  if (rxBurst) { 
+  /*
+   * EDGE demodulator returns 444 (148 * 3) bits
+   */
+  if (rxBurst->size() == gSlotLen * 3)
+    nbits = gSlotLen * 3;
 
-    LOG(DEBUG) << "burst parameters: "
-	  << " time: " << burstTime
-	  << " RSSI: " << RSSI
-	  << " TOA: "  << TOA
-	  << " bits: " << *rxBurst;
+  dBm = RSSI + rssiOffset;
+  logRxBurst(rxBurst, burstTime, dBm, RSSI, noise, TOA);
 
-    char burstString[gSlotLen+10];
+  TOAint = (int) (TOA * 256.0 + 0.5); // round to closest integer
+
+  char burstString[nbits + 10];
   burstString[0] = burstTime.TN();
   for (int i = 0; i < 4; i++)
     burstString[1+i] = (burstTime.FN() >> ((3-i)*8)) & 0x0ff;
-    burstString[5] = RSSI;
-    burstString[6] = (TOA >> 8) & 0x0ff;
-    burstString[7] = TOA & 0x0ff;
+  burstString[5] = (int)dBm;
+  burstString[6] = (TOAint >> 8) & 0x0ff;
+  burstString[7] = TOAint & 0x0ff;
   SoftVector::iterator burstItr = rxBurst->begin();
 
-    for (unsigned int i = 0; i < gSlotLen; i++) {
+  for (unsigned i = 0; i < nbits; i++)
     burstString[8 + i] = (char) round((*burstItr++) * 255.0);
-    }
-    burstString[gSlotLen+9] = '\0';
+
+  burstString[nbits + 9] = '\0';
   delete rxBurst;
 
-    mDataSockets[chan]->write(burstString,gSlotLen+10);
-  }
+  mDataSockets[chan]->write(burstString, nbits + 10);
 }
 
 void Transceiver::driveTxFIFO()
@@ -865,7 +1032,7 @@ void Transceiver::writeClockInterface()
 
   LOG(INFO) << "ClockInterface: sending " << command;
 
-  mClockSocket->write(command, strlen(command) + 1);
+  mClockSocket.write(command, strlen(command) + 1);
 
   mLastClockUpdateTime = mTransmitDeadlineClock;
 
@@ -933,15 +1100,7 @@ void *TxUpperLoopAdapter(TransceiverChannel *chan)
   trx->setPriority(0.40);
 
   while (1) {
-    bool stale = false;
-    // Flush the UDP packets until a successful transfer.
-    while (!trx->driveTxPriorityQueue(num)) {
-      stale = true;
-    }
-    if (!num && stale) {
-      // If a packet was stale, remind the GSM stack of the clock.
-      trx->writeClockInterface();
-    }
+    trx->driveTxPriorityQueue(num);
     pthread_testcancel();
   }
   return NULL;

Transceiver52M/Transceiver.h

@@ -54,7 +54,7 @@ struct TransceiverState {
   ~TransceiverState();
 
   /* Initialize a multiframe slot in the filler table */
-  void init(size_t slot, signalVector *burst, bool fill);
+  bool init(int filler, size_t sps, float scale, size_t rtsc);
 
   int chanType[8];
 
@@ -81,98 +81,14 @@ struct TransceiverState {
   /* Received noise energy levels */
   float mNoiseLev;
   noiseVector mNoises;
+
+  /* Shadowed downlink attenuation */
+  int mPower;
 };
 
 /** The Transceiver class, responsible for physical layer of basestation */
 class Transceiver {
-private:
-  int mBasePort;
-  std::string mAddr;
-  GSM::Time mTransmitLatency;     ///< latency between basestation clock and transmit deadline clock
-  GSM::Time mLatencyUpdateTime;   ///< last time latency was updated
-
-  std::vector<UDPSocket *> mDataSockets;  ///< socket for writing to/reading from GSM core
-  std::vector<UDPSocket *> mCtrlSockets;  ///< socket for writing/reading control commands from GSM core
-  UDPSocket *mClockSocket;                ///< socket for writing clock updates to GSM core
-
-  std::vector<VectorQueue> mTxPriorityQueues;   ///< priority queue of transmit bursts received from GSM core
-  std::vector<VectorFIFO *>  mReceiveFIFO;      ///< radioInterface FIFO of receive bursts
-
-  std::vector<Thread *> mRxServiceLoopThreads;  ///< thread to pull bursts into receive FIFO
-  Thread *mRxLowerLoopThread;                   ///< thread to pull bursts into receive FIFO
-  Thread *mTxLowerLoopThread;                   ///< thread to push bursts into transmit FIFO
-  std::vector<Thread *> mControlServiceLoopThreads;         ///< thread to process control messages from GSM core
-  std::vector<Thread *> mTxPriorityQueueServiceLoopThreads; ///< thread to process transmit bursts from GSM core
-
-  GSM::Time mTransmitDeadlineClock;       ///< deadline for pushing bursts into transmit FIFO 
-  GSM::Time mLastClockUpdateTime;         ///< last time clock update was sent up to core
-
-  RadioInterface *mRadioInterface;	  ///< associated radioInterface object
-  double txFullScale;                     ///< full scale input to radio
-  double rxFullScale;                     ///< full scale output to radio
-
-  /** Codes for burst types of received bursts*/
-  typedef enum {
-    OFF,               ///< timeslot is off
-    TSC,	       ///< timeslot should contain a normal burst
-    RACH,	       ///< timeslot should contain an access burst
-    IDLE	       ///< timeslot is an idle (or dummy) burst
-  } CorrType;
-
-  /** modulate and add a burst to the transmit queue */
-  void addRadioVector(size_t chan, BitVector &bits,
-                      int RSSI, GSM::Time &wTime);
-
-  /** Update filler table */
-  void updateFillerTable(size_t chan, radioVector *burst);
-
-  /** Push modulated burst into transmit FIFO corresponding to a particular timestamp */
-  void pushRadioVector(GSM::Time &nowTime);
-
-  /** Pull and demodulate a burst from the receive FIFO */
-  SoftVector *pullRadioVector(GSM::Time &wTime, int &RSSI,
-                              int &timingOffset, size_t chan = 0);
-
-  /** Set modulus for specific timeslot */
-  void setModulus(size_t timeslot, size_t chan);
-
-  /** return the expected burst type for the specified timestamp */
-  CorrType expectedCorrType(GSM::Time currTime, size_t chan);
-
-  /** send messages over the clock socket */
-  void writeClockInterface(void);
-
-  /** Detect RACH bursts */
-  bool detectRACH(TransceiverState *state,
-                  signalVector &burst,
-                  complex &amp, float &toa);
-
-  /** Detect normal bursts */
-  bool detectTSC(TransceiverState *state,
-                 signalVector &burst,
-                 complex &amp, float &toa, GSM::Time &time);
-
-  /** Demodulat burst and output soft bits */
-  SoftVector *demodulate(TransceiverState *state,
-                         signalVector &burst, complex amp,
-                         float toa, size_t tn, bool equalize);
-
-
-  int mSPSTx;                          ///< number of samples per Tx symbol
-  int mSPSRx;                          ///< number of samples per Rx symbol
-  size_t mChans;
-
-  bool mOn;			       ///< flag to indicate that transceiver is powered on
-  double mTxFreq;                      ///< the transmit frequency
-  double mRxFreq;                      ///< the receive frequency
-  int mPower;                          ///< the transmit power in dB
-  unsigned mTSC;                       ///< the midamble sequence code
-  unsigned mMaxExpectedDelay;            ///< maximum expected time-of-arrival offset in GSM symbols
-
-  std::vector<TransceiverState> mStates;
-
 public:
-
   /** Transceiver constructor 
       @param wBasePort base port number of UDP sockets
       @param TRXAddress IP address of the TRX manager, as a string
@@ -182,16 +98,16 @@ public:
   */
   Transceiver(int wBasePort,
               const char *TRXAddress,
-	      size_t wSPS, size_t chans,
+              size_t tx_sps, size_t rx_sps, size_t chans,
               GSM::Time wTransmitLatency,
-	      RadioInterface *wRadioInterface);
+              RadioInterface *wRadioInterface,
+              double wRssiOffset);
 
   /** Destructor */
   ~Transceiver();
 
-  /** start the Transceiver */
-  void start();
-  bool init(bool filler);
+  /** Start the control loop */
+  bool init(int filler, size_t rtsc);
 
   /** attach the radioInterface receive FIFO */
   bool receiveFIFO(VectorFIFO *wFIFO, size_t chan)
@@ -226,6 +142,105 @@ public:
     LOOPBACK            ///< similar go VII, used in loopback testing
   } ChannelCombination;
 
+  /** Codes for burst types of received bursts*/
+  typedef enum {
+    OFF,               ///< timeslot is off
+    TSC,	       ///< timeslot should contain a normal burst
+    RACH,	       ///< timeslot should contain an access burst
+    EDGE,	       ///< timeslot should contain an EDGE burst
+    IDLE	       ///< timeslot is an idle (or dummy) burst
+  } CorrType;
+
+  enum FillerType {
+    FILLER_DUMMY,
+    FILLER_ZERO,
+    FILLER_NORM_RAND,
+    FILLER_EDGE_RAND,
+    FILLER_ACCESS_RAND,
+  };
+
+private:
+  int mBasePort;
+  std::string mAddr;
+
+  std::vector<UDPSocket *> mDataSockets;  ///< socket for writing to/reading from GSM core
+  std::vector<UDPSocket *> mCtrlSockets;  ///< socket for writing/reading control commands from GSM core
+  UDPSocket mClockSocket;                 ///< socket for writing clock updates to GSM core
+
+  std::vector<VectorQueue> mTxPriorityQueues;   ///< priority queue of transmit bursts received from GSM core
+  std::vector<VectorFIFO *>  mReceiveFIFO;      ///< radioInterface FIFO of receive bursts
+
+  std::vector<Thread *> mRxServiceLoopThreads;  ///< thread to pull bursts into receive FIFO
+  Thread *mRxLowerLoopThread;                   ///< thread to pull bursts into receive FIFO
+  Thread *mTxLowerLoopThread;                   ///< thread to push bursts into transmit FIFO
+  std::vector<Thread *> mControlServiceLoopThreads;         ///< thread to process control messages from GSM core
+  std::vector<Thread *> mTxPriorityQueueServiceLoopThreads; ///< thread to process transmit bursts from GSM core
+
+  GSM::Time mTransmitLatency;             ///< latency between basestation clock and transmit deadline clock
+  GSM::Time mLatencyUpdateTime;           ///< last time latency was updated
+  GSM::Time mTransmitDeadlineClock;       ///< deadline for pushing bursts into transmit FIFO 
+  GSM::Time mLastClockUpdateTime;         ///< last time clock update was sent up to core
+
+  RadioInterface *mRadioInterface;	  ///< associated radioInterface object
+  double txFullScale;                     ///< full scale input to radio
+  double rxFullScale;                     ///< full scale output to radio
+
+  double rssiOffset;                      ///< RSSI to dBm conversion offset
+
+  /** modulate and add a burst to the transmit queue */
+  void addRadioVector(size_t chan, BitVector &bits,
+                      int RSSI, GSM::Time &wTime);
+
+  /** Update filler table */
+  void updateFillerTable(size_t chan, radioVector *burst);
+
+  /** Push modulated burst into transmit FIFO corresponding to a particular timestamp */
+  void pushRadioVector(GSM::Time &nowTime);
+
+  /** Pull and demodulate a burst from the receive FIFO */
+  SoftVector *pullRadioVector(GSM::Time &wTime, double &RSSI, bool &isRssiValid,
+                              double &timingOffset, double &noise,
+                              size_t chan = 0);
+
+  /** Set modulus for specific timeslot */
+  void setModulus(size_t timeslot, size_t chan);
+
+  /** return the expected burst type for the specified timestamp */
+  CorrType expectedCorrType(GSM::Time currTime, size_t chan);
+
+  /** send messages over the clock socket */
+  void writeClockInterface(void);
+
+  /** Detectbursts */
+  int detectBurst(signalVector &burst,
+                  complex &amp, float &toa, CorrType type);
+
+  /** Demodulate burst and output soft bits */
+  SoftVector *demodulate(signalVector &burst,
+                         complex amp, float toa, CorrType type);
+
+  int mSPSTx;                          ///< number of samples per Tx symbol
+  int mSPSRx;                          ///< number of samples per Rx symbol
+  size_t mChans;
+
+  bool mOn;	                           ///< flag to indicate that transceiver is powered on
+  bool mHandover[8][8];                ///< expect handover to the timeslot/subslot
+  double mTxFreq;                      ///< the transmit frequency
+  double mRxFreq;                      ///< the receive frequency
+  unsigned mTSC;                       ///< the midamble sequence code
+  unsigned mMaxExpectedDelayAB;        ///< maximum expected time-of-arrival offset in GSM symbols for Access Bursts (RACH)
+  unsigned mMaxExpectedDelayNB;        ///< maximum expected time-of-arrival offset in GSM symbols for Normal Bursts
+  unsigned mWriteBurstToDiskMask;      ///< debug: bitmask to indicate which timeslots to dump to disk
+
+  std::vector<TransceiverState> mStates;
+
+  /** Start and stop I/O threads through the control socket API */
+  bool start();
+  void stop();
+
+  /** Protect destructor accessable stop call */
+  Mutex mLock;
+
 protected:
   /** drive lower receive I/O and burst generation */
   void driveReceiveRadio();
@@ -261,6 +276,8 @@ protected:
   /** set priority on current thread */
   void setPriority(float prio = 0.5) { mRadioInterface->setPriority(prio); }
 
+  void logRxBurst(SoftVector *burst, GSM::Time time, double dbm,
+                  double rssi, double noise, double toa);
 };
 
 void *RxUpperLoopAdapter(TransceiverChannel *);

Transceiver52M/UHDDevice.cpp

@@ -34,12 +34,25 @@
 
 #define B2XX_CLK_RT      26e6
 #define E1XX_CLK_RT      52e6
-#define B2XX_BASE_RT     GSMRATE
 #define B100_BASE_RT     400000
 #define USRP2_BASE_RT    390625
-#define TX_AMPL          0.3
+#define USRP_TX_AMPL     0.3
+#define UMTRX_TX_AMPL    0.7
 #define SAMPLE_BUF_SZ    (1 << 20)
 
+/*
+ * UHD timeout value on streaming (re)start
+ *
+ * Allow some time for streaming to commence after the start command is issued,
+ * but consider a wait beyond one second to be a definite error condition.
+ */
+#define UHD_RESTART_TIMEOUT     1.0
+
+/*
+ * UmTRX specific settings
+ */
+#define UMTRX_VGA1_DEF   -18
+
 enum uhd_dev_type {
 	USRP1,
 	USRP2,
@@ -47,17 +60,33 @@ enum uhd_dev_type {
 	B200,
 	B210,
 	E1XX,
+	E3XX,
+	X3XX,
 	UMTRX,
 	NUM_USRP_TYPES,
 };
 
 struct uhd_dev_offset {
 	enum uhd_dev_type type;
-	int sps;
+	size_t tx_sps;
+	size_t rx_sps;
 	double offset;
 	const std::string desc;
 };
 
+/*
+ * USRP version dependent device timings
+ */
+#ifdef USE_UHD_3_9
+#define B2XX_TIMING_1SPS	1.7153e-4
+#define B2XX_TIMING_4SPS	1.1696e-4
+#define B2XX_TIMING_4_4SPS	6.18462e-5
+#else
+#define B2XX_TIMING_1SPS	9.9692e-5
+#define B2XX_TIMING_4SPS	6.9248e-5
+#define B2XX_TIMING_4_4SPS	4.52308e-5
+#endif
+
 /*
  * Tx / Rx sample offset values. In a perfect world, there is no group delay
  * though analog components, and behaviour through digital filters exactly
@@ -68,74 +97,40 @@ struct uhd_dev_offset {
  * Notes:
  *   USRP1 with timestamps is not supported by UHD.
  */
-static struct uhd_dev_offset uhd_offsets[NUM_USRP_TYPES * 2] = {
-	{ USRP1, 1,       0.0, "USRP1 not supported" },
-	{ USRP1, 4,       0.0, "USRP1 not supported"},
-	{ USRP2, 1, 1.2184e-4, "N2XX 1 SPS" },
-	{ USRP2, 4, 8.0230e-5, "N2XX 4 SPS" },
-	{ B100,  1, 1.2104e-4, "B100 1 SPS" },
-	{ B100,  4, 7.9307e-5, "B100 4 SPS" },
-	{ B200,  1, 9.9692e-5, "B200 1 SPS" },
-	{ B200,  4, 6.9248e-5, "B200 4 SPS" },
-	{ B210,  1, 9.9692e-5, "B210 1 SPS" },
-	{ B210,  4, 6.9248e-5, "B210 4 SPS" },
-	{ E1XX,  1, 9.5192e-5, "E1XX 1 SPS" },
-	{ E1XX,  4, 6.5571e-5, "E1XX 4 SPS" },
-	{ UMTRX, 1, 9.9692e-5, "UmTRX 1 SPS" },
-	{ UMTRX, 4, 7.3846e-5, "UmTRX 4 SPS" },
+static struct uhd_dev_offset uhd_offsets[] = {
+	{ USRP1, 1, 1,       0.0, "USRP1 not supported" },
+	{ USRP1, 4, 1,       0.0, "USRP1 not supported"},
+	{ USRP2, 1, 1, 1.2184e-4, "N2XX 1 SPS" },
+	{ USRP2, 4, 1, 8.0230e-5, "N2XX 4 SPS" },
+	{ B100,  1, 1, 1.2104e-4, "B100 1 SPS" },
+	{ B100,  4, 1, 7.9307e-5, "B100 4 SPS" },
+	{ B200,  1, 1, B2XX_TIMING_1SPS, "B200 1 SPS" },
+	{ B200,  4, 1, B2XX_TIMING_4SPS, "B200 4 SPS" },
+	{ B210,  1, 1, B2XX_TIMING_1SPS, "B210 1 SPS" },
+	{ B210,  4, 1, B2XX_TIMING_4SPS, "B210 4 SPS" },
+	{ E1XX,  1, 1, 9.5192e-5, "E1XX 1 SPS" },
+	{ E1XX,  4, 1, 6.5571e-5, "E1XX 4 SPS" },
+	{ E3XX,  1, 1, 1.84616e-4, "E3XX 1 SPS" },
+	{ E3XX,  4, 1, 1.29231e-4, "E3XX 4 SPS" },
+	{ X3XX,  1, 1, 1.5360e-4, "X3XX 1 SPS"},
+	{ X3XX,  4, 1, 1.1264e-4, "X3XX 4 SPS"},
+	{ UMTRX, 1, 1, 9.9692e-5, "UmTRX 1 SPS" },
+	{ UMTRX, 4, 1, 7.3846e-5, "UmTRX 4 SPS" },
+	{ B200,  4, 4, B2XX_TIMING_4_4SPS, "B200/B210 EDGE mode (4 SPS TX/RX)" },
+	{ B210,  4, 4, B2XX_TIMING_4_4SPS, "B200/B210 EDGE mode (4 SPS TX/RX)" },
+	{ UMTRX, 4, 4, 5.1503e-5, "UmTRX EDGE mode (4 SPS TX/RX)" },
 };
+#define NUM_UHD_OFFSETS (sizeof(uhd_offsets)/sizeof(uhd_offsets[0]))
 
 /*
  * Offset handling for special cases. Currently used for UmTRX dual channel
  * diversity receiver only.
  */
 static struct uhd_dev_offset special_offsets[] = {
-	{ UMTRX, 1, 8.0875e-5, "UmTRX diversity, 1 SPS" },
-	{ UMTRX, 4, 5.2103e-5, "UmTRX diversity, 4 SPS" },
+	{ UMTRX, 1, 1, 8.0875e-5, "UmTRX diversity, 1 SPS" },
+	{ UMTRX, 4, 1, 5.2103e-5, "UmTRX diversity, 4 SPS" },
 };
 
-static double get_dev_offset(enum uhd_dev_type type,
-			     int sps, bool diversity = false)
-{
-	struct uhd_dev_offset *offset;
-
-	/* Reject USRP1 */
-	if (type == USRP1) {
-		LOG(ERR) << "Invalid device type";
-		return 0.0;
-	}
-
-	/* Special cases (e.g. diversity receiver) */
-	if (diversity) {
-		if (type != UMTRX) {
-			LOG(ALERT) << "Diversity on UmTRX only";
-			return 0.0;
-		}
-
-		switch (sps) {
-		case 1:
-			offset = &special_offsets[0];
-			break;
-		case 4:
-		default:
-			offset = &special_offsets[1];
-		}
-	} else {
-		/* Normal operation */
-		switch (sps) {
-		case 1:
-			offset = &uhd_offsets[2 * type + 0];
-			break;
-		case 4:
-		default:
-			offset = &uhd_offsets[2 * type + 1];
-		}
-	}
-
-	std::cout << "-- Setting " << offset->desc << std::endl;
-
-	return offset->offset;
-}
 
 /*
  * Select sample rate based on device type and requested samples-per-symbol.
@@ -156,12 +151,14 @@ static double select_rate(uhd_dev_type type, int sps, bool diversity = false)
 
 	switch (type) {
 	case USRP2:
+	case X3XX:
 		return USRP2_BASE_RT * sps;
 	case B100:
 		return B100_BASE_RT * sps;
 	case B200:
 	case B210:
 	case E1XX:
+	case E3XX:
 	case UMTRX:
 		return GSMRATE * sps;
 	default:
@@ -172,23 +169,6 @@ static double select_rate(uhd_dev_type type, int sps, bool diversity = false)
 	return -9999.99;
 }
 
-/** Timestamp conversion
-    @param timestamp a UHD or OpenBTS timestamp
-    @param rate sample rate
-    @return the converted timestamp
-*/
-uhd::time_spec_t convert_time(TIMESTAMP ticks, double rate)
-{
-	double secs = (double) ticks / rate;
-	return uhd::time_spec_t(secs);
-}
-
-TIMESTAMP convert_time(uhd::time_spec_t ts, double rate)
-{
-	TIMESTAMP ticks = ts.get_full_secs() * rate;
-	return ts.get_tick_count(rate) + ticks;
-}
-
 /*
     Sample Buffer - Allows reading and writing of timed samples using OpenBTS
                     or UHD style timestamps. Time conversions are handled
@@ -225,7 +205,7 @@ public:
 	/** Buffer status string
 	    @return a formatted string describing internal buffer state
 	*/
-	std::string str_status() const;
+	std::string str_status(size_t ts) const;
 
 	/** Formatted error string 
 	    @param code an error code
@@ -262,13 +242,14 @@ private:
 */
 class uhd_device : public RadioDevice {
 public:
-	uhd_device(size_t sps, size_t chans, bool diversity, double offset);
+	uhd_device(size_t tx_sps, size_t rx_sps,
+		   size_t chans, bool diversity, double offset);
 	~uhd_device();
 
-	int open(const std::string &args, bool extref);
+	int open(const std::string &args, bool extref, bool swap_channels);
 	bool start();
 	bool stop();
-	void restart();
+	bool restart();
 	void setPriority(float prio);
 	enum TxWindowType getWindowType() { return tx_window; }
 
@@ -283,11 +264,11 @@ public:
 	bool setTxFreq(double wFreq, size_t chan);
 	bool setRxFreq(double wFreq, size_t chan);
 
-	inline TIMESTAMP initialWriteTimestamp() { return ts_initial * sps; }
-	inline TIMESTAMP initialReadTimestamp() { return ts_initial; }
+	inline TIMESTAMP initialWriteTimestamp();
+	inline TIMESTAMP initialReadTimestamp();
 
-	inline double fullScaleInputValue() { return 32000 * TX_AMPL; }
-	inline double fullScaleOutputValue() { return 32000; }
+	double fullScaleInputValue();
+	double fullScaleOutputValue();
 
 	double setRxGain(double db, size_t chan);
 	double getRxGain(size_t chan);
@@ -313,8 +294,9 @@ public:
 
 	enum err_code {
 		ERROR_TIMING = -1,
-		ERROR_UNRECOVERABLE = -2,
-		ERROR_UNHANDLED = -3,
+		ERROR_TIMEOUT = -2,
+		ERROR_UNRECOVERABLE = -3,
+		ERROR_UNHANDLED = -4,
 	};
 
 private:
@@ -324,7 +306,7 @@ private:
 	enum TxWindowType tx_window;
 	enum uhd_dev_type dev_type;
 
-	size_t sps, chans;
+	size_t tx_sps, rx_sps, chans;
 	double tx_rate, rx_rate;
 
 	double tx_gain_min, tx_gain_max;
@@ -346,6 +328,7 @@ private:
 	std::vector<smpl_buf *> rx_buffers;
 
 	void init_gains();
+	double get_dev_offset(bool edge, bool diversity);
 	int set_master_clk(double rate);
 	int set_rates(double tx_rate, double rx_rate);
 	bool parse_dev_type();
@@ -358,8 +341,9 @@ private:
 	uhd::tune_request_t select_freq(double wFreq, size_t chan, bool tx);
 	bool set_freq(double freq, size_t chan, bool tx);
 
-	Thread async_event_thrd;
+	Thread *async_event_thrd;
 	bool diversity;
+	Mutex tune_lock;
 };
 
 void *async_event_loop(uhd_device *dev)
@@ -396,14 +380,22 @@ void uhd_msg_handler(uhd::msg::type_t type, const std::string &msg)
 	}
 }
 
-uhd_device::uhd_device(size_t sps, size_t chans, bool diversity, double offset)
+static void thread_enable_cancel(bool cancel)
+{
+	cancel ? pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL) :
+		 pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, NULL);
+}
+
+uhd_device::uhd_device(size_t tx_sps, size_t rx_sps,
+		       size_t chans, bool diversity, double offset)
 	: tx_gain_min(0.0), tx_gain_max(0.0),
 	  rx_gain_min(0.0), rx_gain_max(0.0),
 	  tx_spp(0), rx_spp(0),
 	  started(false), aligned(false), rx_pkt_cnt(0), drop_cnt(0),
 	  prev_ts(0,0), ts_initial(0), ts_offset(0)
 {
-	this->sps = sps;
+	this->tx_sps = tx_sps;
+	this->rx_sps = rx_sps;
 	this->chans = chans;
 	this->offset = offset;
 	this->diversity = diversity;
@@ -421,21 +413,43 @@ void uhd_device::init_gains()
 {
 	uhd::gain_range_t range;
 
+	if (dev_type == UMTRX) {
+		std::vector<std::string> gain_stages = usrp_dev->get_tx_gain_names(0);
+		if (gain_stages[0] == "VGA") {
+			LOG(WARNING) << "Update your UHD version for a proper Tx gain support";
+		}
+		if (gain_stages[0] == "VGA" || gain_stages[0] == "PA") {
 			range = usrp_dev->get_tx_gain_range();
 			tx_gain_min = range.start();
 			tx_gain_max = range.stop();
+		} else {
+			range = usrp_dev->get_tx_gain_range("VGA2");
+			tx_gain_min = UMTRX_VGA1_DEF + range.start();
+			tx_gain_max = UMTRX_VGA1_DEF + range.stop();
+		}
+	} else {
+		range = usrp_dev->get_tx_gain_range();
+		tx_gain_min = range.start();
+		tx_gain_max = range.stop();
+	}
+	LOG(INFO) << "Supported Tx gain range [" << tx_gain_min << "; " << tx_gain_max << "]";
 
 	range = usrp_dev->get_rx_gain_range();
 	rx_gain_min = range.start();
 	rx_gain_max = range.stop();
+	LOG(INFO) << "Supported Rx gain range [" << rx_gain_min << "; " << rx_gain_max << "]";
 
 	for (size_t i = 0; i < tx_gains.size(); i++) {
-		usrp_dev->set_tx_gain((tx_gain_min + tx_gain_max) / 2, i);
+		double gain = (tx_gain_min + tx_gain_max) / 2;
+		LOG(INFO) << "Default setting Tx gain for channel " << i << " to " << gain;
+		usrp_dev->set_tx_gain(gain, i);
 		tx_gains[i] = usrp_dev->get_tx_gain(i);
 	}
 
 	for (size_t i = 0; i < rx_gains.size(); i++) {
-		usrp_dev->set_rx_gain((rx_gain_min + rx_gain_max) / 2, i);
+		double gain = (rx_gain_min + rx_gain_max) / 2;
+		LOG(INFO) << "Default setting Rx gain for channel " << i << " to " << gain;
+		usrp_dev->set_rx_gain(gain, i);
 		rx_gains[i] = usrp_dev->get_rx_gain(i);
 	}
 
@@ -443,6 +457,64 @@ void uhd_device::init_gains()
 
 }
 
+double uhd_device::get_dev_offset(bool edge, bool diversity)
+{
+	struct uhd_dev_offset *offset = NULL;
+
+	/* Reject USRP1 */
+	if (dev_type == USRP1) {
+		LOG(ERR) << "Invalid device type";
+		return 0.0;
+	}
+
+	if (edge && diversity) {
+		LOG(ERR) << "Unsupported configuration";
+		return 0.0;
+	}
+
+	if (edge && (dev_type != B200) &&
+	    (dev_type != B210) && (dev_type != UMTRX)) {
+		LOG(ALERT) << "EDGE is supported on B200/B210 and UmTRX only";
+		return 0.0;
+	}
+
+	/* Special cases (e.g. diversity receiver) */
+	if (diversity) {
+		if (dev_type != UMTRX) {
+			LOG(ALERT) << "Diversity on UmTRX only";
+			return 0.0;
+		}
+
+		switch (tx_sps) {
+		case 1:
+			offset = &special_offsets[0];
+			break;
+		case 4:
+		default:
+			offset = &special_offsets[1];
+		}
+	} else {
+		/* Search for matching offset value */
+		for (size_t i = 0; i < NUM_UHD_OFFSETS; i++) {
+			if ((dev_type == uhd_offsets[i].type) &&
+				(tx_sps == uhd_offsets[i].tx_sps) &&
+				(rx_sps == uhd_offsets[i].rx_sps)) {
+				offset = &uhd_offsets[i];
+				break;
+			}
+		}
+	}
+
+	if (!offset) {
+		LOG(ERR) << "Invalid device configuration";
+		return 0.0;
+	}
+
+	std::cout << "-- Setting " << offset->desc << std::endl;
+
+	return offset->offset;
+}
+
 int uhd_device::set_master_clk(double clk_rate)
 {
 	double actual, offset, limit = 1.0;
@@ -474,7 +546,7 @@ int uhd_device::set_rates(double tx_rate, double rx_rate)
 	double tx_offset, rx_offset;
 
 	/* B2XX and E1xx are the only device where we set FPGA clocking */
-	if ((dev_type == B200) || (dev_type == B210)) {
+	if ((dev_type == B200) || (dev_type == B210) || (dev_type == E3XX)) {
 		if (set_master_clk(B2XX_CLK_RT) < 0)
 			return -1;
 	}
@@ -514,10 +586,26 @@ double uhd_device::setTxGain(double db, size_t chan)
 		return 0.0f;
 	}
 
+	if (dev_type == UMTRX) {
+		std::vector<std::string> gain_stages = usrp_dev->get_tx_gain_names(0);
+		if (gain_stages[0] == "VGA" || gain_stages[0] == "PA") {
 			usrp_dev->set_tx_gain(db, chan);
+		} else {
+			// New UHD versions support split configuration of
+			// Tx gain stages. We utilize this to set the gain
+			// configuration, optimal for the Tx signal quality.
+			// From our measurements, VGA1 must be 18dB plus-minus
+			// one and VGA2 is the best when 23dB or lower.
+			usrp_dev->set_tx_gain(UMTRX_VGA1_DEF, "VGA1", chan);
+			usrp_dev->set_tx_gain(db-UMTRX_VGA1_DEF, "VGA2", chan);
+		}
+	} else {
+		usrp_dev->set_tx_gain(db, chan);
+	}
+
 	tx_gains[chan] = usrp_dev->get_tx_gain(chan);
 
-	LOG(INFO) << "Set TX gain to " << tx_gains[chan] << "dB";
+	LOG(INFO) << "Set TX gain to " << tx_gains[chan] << "dB (asked for " << db << "dB)";
 
 	return tx_gains[chan];
 }
@@ -532,7 +620,7 @@ double uhd_device::setRxGain(double db, size_t chan)
 	usrp_dev->set_rx_gain(db, chan);
 	rx_gains[chan] = usrp_dev->get_rx_gain(chan);
 
-	LOG(INFO) << "Set RX gain to " << rx_gains[chan] << "dB";
+	LOG(INFO) << "Set RX gain to " << rx_gains[chan] << "dB (asked for " << db << "dB)";
 
 	return rx_gains[chan];
 }
@@ -557,8 +645,8 @@ bool uhd_device::parse_dev_type()
 {
 	std::string mboard_str, dev_str;
 	uhd::property_tree::sptr prop_tree;
-	size_t usrp1_str, usrp2_str, e100_str, e110_str,
-	       b100_str, b200_str, b210_str, umtrx_str;
+	size_t usrp1_str, usrp2_str, e100_str, e110_str, e310_str, e3xx_str,
+	       b100_str, b200_str, b210_str, x300_str, x310_str, umtrx_str;
 
 	prop_tree = usrp_dev->get_device()->get_tree();
 	dev_str = prop_tree->access<std::string>("/name").get();
@@ -571,6 +659,10 @@ bool uhd_device::parse_dev_type()
 	b210_str = mboard_str.find("B210");
 	e100_str = mboard_str.find("E100");
 	e110_str = mboard_str.find("E110");
+	e310_str = mboard_str.find("E310");
+	e3xx_str = mboard_str.find("E3XX");
+	x300_str = mboard_str.find("X300");
+	x310_str = mboard_str.find("X310");
 	umtrx_str = dev_str.find("UmTRX");
 
 	if (usrp1_str != std::string::npos) {
@@ -598,11 +690,22 @@ bool uhd_device::parse_dev_type()
 	} else if (usrp2_str != std::string::npos) {
 		tx_window = TX_WINDOW_FIXED;
 		dev_type = USRP2;
+	} else if ((e310_str != std::string::npos) ||
+		   (e3xx_str != std::string::npos)) {
+		tx_window = TX_WINDOW_FIXED;
+		dev_type = E3XX;
+	} else if (x300_str != std::string::npos) {
+		tx_window = TX_WINDOW_FIXED;
+		dev_type = X3XX;
+	} else if (x310_str != std::string::npos) {
+		tx_window = TX_WINDOW_FIXED;
+		dev_type = X3XX;
 	} else if (umtrx_str != std::string::npos) {
 		tx_window = TX_WINDOW_FIXED;
 		dev_type = UMTRX;
 	} else {
-		LOG(ALERT) << "Unknown UHD device type " << dev_str;
+		LOG(ALERT) << "Unknown UHD device type "
+			   << dev_str << " " << mboard_str;
 		return false;
 	}
 
@@ -617,7 +720,27 @@ bool uhd_device::parse_dev_type()
 	return true;
 }
 
-int uhd_device::open(const std::string &args, bool extref)
+/*
+ * Check for UHD version > 3.9.0 for E3XX support
+ */
+static bool uhd_e3xx_version_chk()
+{
+	std::string ver = uhd::get_version_string();
+	std::string major_str(ver.begin(), ver.begin() + 3);
+	std::string minor_str(ver.begin() + 4, ver.begin() + 7);
+
+	int major_val = atoi(major_str.c_str());
+	int minor_val = atoi(minor_str.c_str());
+
+	if (major_val < 3)
+		return false;
+	if (minor_val < 9)
+		return false;
+
+	return true;
+}
+
+int uhd_device::open(const std::string &args, bool extref, bool swap_channels)
 {
 	// Find UHD devices
 	uhd::device_addr_t addr(args);
@@ -630,9 +753,9 @@ int uhd_device::open(const std::string &args, bool extref)
 	// Use the first found device
 	LOG(INFO) << "Using discovered UHD device " << dev_addrs[0].to_string();
 	try {
-		usrp_dev = uhd::usrp::multi_usrp::make(dev_addrs[0]);
+		usrp_dev = uhd::usrp::multi_usrp::make(addr);
 	} catch(...) {
-		LOG(ALERT) << "UHD make failed, device " << dev_addrs[0].to_string();
+		LOG(ALERT) << "UHD make failed, device " << args;
 		return -1;
 	}
 
@@ -640,10 +763,15 @@ int uhd_device::open(const std::string &args, bool extref)
 	if (!parse_dev_type())
 		return -1;
 
+	if ((dev_type == E3XX) && !uhd_e3xx_version_chk()) {
+		LOG(ALERT) << "E3XX requires UHD 003.009.000 or greater";
+		return -1;
+	}
+
 	// Verify and set channels
 	if ((dev_type == B210) && (chans == 2)) {
 	} else if ((dev_type == UMTRX) && (chans == 2)) {
-		uhd::usrp::subdev_spec_t subdev_spec("A:0 B:0");
+		uhd::usrp::subdev_spec_t subdev_spec(swap_channels?"B:0 A:0":"A:0 B:0");
 		usrp_dev->set_tx_subdev_spec(subdev_spec);
 		usrp_dev->set_rx_subdev_spec(subdev_spec);
 	} else if (chans != 1) {
@@ -661,18 +789,24 @@ int uhd_device::open(const std::string &args, bool extref)
 		usrp_dev->set_clock_source("external");
 
 	// Set rates
-	double _rx_rate;
-	double _tx_rate = select_rate(dev_type, sps);
-	if (diversity)
-		_rx_rate = select_rate(dev_type, 1, true);
-	else
-		_rx_rate = _tx_rate / sps;
+	double _tx_rate = select_rate(dev_type, tx_sps);
+	double _rx_rate = select_rate(dev_type, rx_sps, diversity);
 
 	if ((_tx_rate < 0.0) || (_rx_rate < 0.0))
 		return -1;
 	if (set_rates(_tx_rate, _rx_rate) < 0)
 		return -1;
 
+	// Set RF frontend bandwidth
+	if (dev_type == UMTRX) {
+		// Setting LMS6002D LPF to 500kHz gives us the best signal quality
+		for (size_t i = 0; i < chans; i++) {
+			usrp_dev->set_tx_bandwidth(500*1000*2, i);
+			if (!diversity)
+				usrp_dev->set_rx_bandwidth(500*1000*2, i);
+		}
+	}
+
 	/* Create TX and RX streamers */
 	uhd::stream_args_t stream_args("sc16");
 	for (size_t i = 0; i < chans; i++)
@@ -690,8 +824,14 @@ int uhd_device::open(const std::string &args, bool extref)
 	for (size_t i = 0; i < rx_buffers.size(); i++)
 		rx_buffers[i] = new smpl_buf(buf_len, rx_rate);
 
-	// Set receive chain sample offset 
-	double offset = get_dev_offset(dev_type, sps, diversity);
+	// Set receive chain sample offset. Trigger the EDGE offset
+	// table by checking for 4 SPS on the receive path. No other
+	// configuration supports using 4 SPS.
+	bool edge = false;
+	if (rx_sps == 4)
+		edge = true;
+
+	double offset = get_dev_offset(edge, diversity);
 	if (offset == 0.0) {
 		LOG(ERR) << "Unsupported configuration, no correction applied";
 		ts_offset = 0;
@@ -712,10 +852,12 @@ int uhd_device::open(const std::string &args, bool extref)
 	case B100:
 		return RESAMP_64M;
 	case USRP2:
+	case X3XX:
 		return RESAMP_100M;
 	case B200:
 	case B210:
 	case E1XX:
+	case E3XX:
 	default:
 		break;
 	}
@@ -727,7 +869,7 @@ bool uhd_device::flush_recv(size_t num_pkts)
 {
 	uhd::rx_metadata_t md;
 	size_t num_smpls;
-	float timeout = 0.1f;
+	float timeout = UHD_RESTART_TIMEOUT;
 
 	std::vector<std::vector<short> >
 		pkt_bufs(chans, std::vector<short>(2 * rx_spp));
@@ -743,12 +885,14 @@ bool uhd_device::flush_recv(size_t num_pkts)
 		if (!num_smpls) {
 			switch (md.error_code) {
 			case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT:
+				LOG(ALERT) << "Device timed out";
+				return false;
 			default:
 				continue;
 			}
 		}
 
-		ts_initial = convert_time(md.time_spec, rx_rate);
+		ts_initial = md.time_spec.to_ticks(rx_rate);
 	}
 
 	LOG(INFO) << "Initial timestamp " << ts_initial << std::endl;
@@ -756,7 +900,7 @@ bool uhd_device::flush_recv(size_t num_pkts)
 	return true;
 }
 
-void uhd_device::restart()
+bool uhd_device::restart()
 {
 	/* Allow 100 ms delay to align multi-channel streams */
 	double delay = 0.1;
@@ -771,7 +915,7 @@ void uhd_device::restart()
 
 	usrp_dev->issue_stream_cmd(cmd);
 
-	flush_recv(1);
+	return flush_recv(10);
 }
 
 bool uhd_device::start()
@@ -787,10 +931,12 @@ bool uhd_device::start()
 	uhd::msg::register_handler(&uhd_msg_handler);
 
 	// Start asynchronous event (underrun check) loop
-	async_event_thrd.start((void * (*)(void*))async_event_loop, (void*)this);
+	async_event_thrd = new Thread();
+	async_event_thrd->start((void * (*)(void*))async_event_loop, (void*)this);
 
 	// Start streaming
-	restart();
+	if (!restart())
+		return false;
 
 	// Display usrp time
 	double time_now = usrp_dev->get_time_now().get_real_secs();
@@ -810,6 +956,10 @@ bool uhd_device::stop()
 
 	usrp_dev->issue_stream_cmd(stream_cmd);
 
+	async_event_thrd->cancel();
+	async_event_thrd->join();
+	delete async_event_thrd;
+
 	started = false;
 	return true;
 }
@@ -830,6 +980,7 @@ int uhd_device::check_rx_md_err(uhd::rx_metadata_t &md, ssize_t num_smpls)
 		switch (md.error_code) {
 		case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT:
 			LOG(ALERT) << "UHD: Receive timed out";
+			return ERROR_TIMEOUT;
 		case uhd::rx_metadata_t::ERROR_CODE_OVERFLOW:
 		case uhd::rx_metadata_t::ERROR_CODE_LATE_COMMAND:
 		case uhd::rx_metadata_t::ERROR_CODE_BROKEN_CHAIN:
@@ -878,14 +1029,14 @@ int uhd_device::readSamples(std::vector<short *> &bufs, int len, bool *overrun,
 	// Shift read time with respect to transmit clock
 	timestamp += ts_offset;
 
-	ts = convert_time(timestamp, rx_rate);
+	ts = uhd::time_spec_t::from_ticks(timestamp, rx_rate);
 	LOG(DEBUG) << "Requested timestamp = " << ts.get_real_secs();
 
 	// Check that timestamp is valid
 	rc = rx_buffers[0]->avail_smpls(timestamp);
 	if (rc < 0) {
 		LOG(ERR) << rx_buffers[0]->str_code(rc);
-		LOG(ERR) << rx_buffers[0]->str_status();
+		LOG(ERR) << rx_buffers[0]->str_status(timestamp);
 		return 0;
 	}
 
@@ -899,8 +1050,11 @@ int uhd_device::readSamples(std::vector<short *> &bufs, int len, bool *overrun,
 
 	// Receive samples from the usrp until we have enough
 	while (rx_buffers[0]->avail_smpls(timestamp) < len) {
+		thread_enable_cancel(false);
 		size_t num_smpls = rx_stream->recv(pkt_ptrs, rx_spp,
 						   metadata, 0.1, true);
+		thread_enable_cancel(true);
+
 		rx_pkt_cnt++;
 
 		// Check for errors 
@@ -910,6 +1064,9 @@ int uhd_device::readSamples(std::vector<short *> &bufs, int len, bool *overrun,
 			LOG(ALERT) << "UHD: Version " << uhd::get_version_string();
 			LOG(ALERT) << "UHD: Unrecoverable error, exiting...";
 			exit(-1);
+		case ERROR_TIMEOUT:
+			// Assume stopping condition
+			return 0;
 		case ERROR_TIMING:
 			restart();
 		case ERROR_UNHANDLED:
@@ -927,7 +1084,7 @@ int uhd_device::readSamples(std::vector<short *> &bufs, int len, bool *overrun,
 			// Continue on local overrun, exit on other errors
 			if ((rc < 0)) {
 				LOG(ERR) << rx_buffers[i]->str_code(rc);
-				LOG(ERR) << rx_buffers[i]->str_status();
+				LOG(ERR) << rx_buffers[i]->str_status(timestamp);
 				if (rc != smpl_buf::ERROR_OVERFLOW)
 					return 0;
 			}
@@ -939,7 +1096,7 @@ int uhd_device::readSamples(std::vector<short *> &bufs, int len, bool *overrun,
 		rc = rx_buffers[i]->read(bufs[i], len, timestamp);
 		if ((rc < 0) || (rc != len)) {
 			LOG(ERR) << rx_buffers[i]->str_code(rc);
-			LOG(ERR) << rx_buffers[i]->str_status();
+			LOG(ERR) << rx_buffers[i]->str_status(timestamp);
 			return 0;
 		}
 	}
@@ -954,7 +1111,7 @@ int uhd_device::writeSamples(std::vector<short *> &bufs, int len, bool *underrun
 	metadata.has_time_spec = true;
 	metadata.start_of_burst = false;
 	metadata.end_of_burst = false;
-	metadata.time_spec = convert_time(timestamp, tx_rate);
+	metadata.time_spec = uhd::time_spec_t::from_ticks(timestamp, tx_rate);
 
 	*underrun = false;
 
@@ -988,7 +1145,10 @@ int uhd_device::writeSamples(std::vector<short *> &bufs, int len, bool *underrun
 		}
 	}
 
+	thread_enable_cancel(false);
 	size_t num_smpls = tx_stream->send(bufs, len, metadata);
+	thread_enable_cancel(true);
+
 	if (num_smpls != (unsigned) len) {
 		LOG(ALERT) << "UHD: Device send timed out";
 	}
@@ -1007,7 +1167,20 @@ uhd::tune_request_t uhd_device::select_freq(double freq, size_t chan, bool tx)
 	std::vector<double> freqs;
 	uhd::tune_request_t treq(freq);
 
-	if ((chans == 1) || ((chans == 2) && dev_type == UMTRX)) {
+	if (dev_type == UMTRX) {
+		if (offset != 0.0)
+			return uhd::tune_request_t(freq, offset);
+
+		// Don't use DSP tuning, because LMS6002D PLL steps are small enough.
+		// We end up with DSP tuning just for 2-3Hz, which is meaningless and
+		// only distort the signal (because cordic is not ideal).
+		treq.target_freq = freq;
+		treq.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
+		treq.rf_freq = freq;
+		treq.dsp_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
+		treq.dsp_freq = 0.0;
+		return treq;
+	} else if (chans == 1) {
 		if (offset == 0.0)
 			return treq;
 
@@ -1087,6 +1260,7 @@ bool uhd_device::setTxFreq(double wFreq, size_t chan)
 		LOG(ALERT) << "Requested non-existent channel " << chan;
 		return false;
 	}
+	ScopedLock lock(tune_lock);
 
 	return set_freq(wFreq, chan, true);
 }
@@ -1097,6 +1271,7 @@ bool uhd_device::setRxFreq(double wFreq, size_t chan)
 		LOG(ALERT) << "Requested non-existent channel " << chan;
 		return false;
 	}
+	ScopedLock lock(tune_lock);
 
 	return set_freq(wFreq, chan, false);
 }
@@ -1121,10 +1296,45 @@ double uhd_device::getRxFreq(size_t chan)
 	return rx_freqs[chan];
 }
 
+/*
+ * Only allow sampling the Rx path lower than Tx and not vice-versa.
+ * Using Tx with 4 SPS and Rx at 1 SPS is the only allowed mixed
+ * combination.
+ */
+TIMESTAMP uhd_device::initialWriteTimestamp()
+{
+	if (rx_sps == tx_sps)
+		return ts_initial;
+	else
+		return ts_initial * tx_sps;
+}
+
+TIMESTAMP uhd_device::initialReadTimestamp()
+{
+	return ts_initial;
+}
+
+double uhd_device::fullScaleInputValue()
+{
+	if (dev_type == UMTRX)
+		return (double) SHRT_MAX * UMTRX_TX_AMPL;
+	else
+		return (double) SHRT_MAX * USRP_TX_AMPL;
+}
+
+double uhd_device::fullScaleOutputValue()
+{
+	return (double) SHRT_MAX;
+}
+
 bool uhd_device::recv_async_msg()
 {
 	uhd::async_metadata_t md;
-	if (!usrp_dev->get_device()->recv_async_msg(md))
+
+	thread_enable_cancel(false);
+	bool rc = usrp_dev->get_device()->recv_async_msg(md);
+	thread_enable_cancel(true);
+	if (!rc)
 		return false;
 
 	// Assume that any error requires resynchronization
@@ -1233,7 +1443,7 @@ ssize_t smpl_buf::avail_smpls(TIMESTAMP timestamp) const
 
 ssize_t smpl_buf::avail_smpls(uhd::time_spec_t timespec) const
 {
-	return avail_smpls(convert_time(timespec, clk_rt));
+	return avail_smpls(timespec.to_ticks(clk_rt));
 }
 
 ssize_t smpl_buf::read(void *buf, size_t len, TIMESTAMP timestamp)
@@ -1279,7 +1489,7 @@ ssize_t smpl_buf::read(void *buf, size_t len, TIMESTAMP timestamp)
 
 ssize_t smpl_buf::read(void *buf, size_t len, uhd::time_spec_t ts)
 {
-	return read(buf, len, convert_time(ts, clk_rt));
+	return read(buf, len, ts.to_ticks(clk_rt));
 }
 
 ssize_t smpl_buf::write(void *buf, size_t len, TIMESTAMP timestamp)
@@ -1292,6 +1502,19 @@ ssize_t smpl_buf::write(void *buf, size_t len, TIMESTAMP timestamp)
 	if ((timestamp + len) <= time_end)
 		return ERROR_TIMESTAMP;
 
+	if (timestamp < time_end) {
+		LOG(ERR) << "Overwriting old buffer data: timestamp="<<timestamp<<" time_end="<<time_end;
+		uhd::time_spec_t ts = uhd::time_spec_t::from_ticks(timestamp, clk_rt);
+		LOG(DEBUG) << "Requested timestamp = " << timestamp << " (real_sec=" << std::fixed << ts.get_real_secs() << " = " << ts.to_ticks(clk_rt) << ") rate=" << clk_rt;
+		// Do not return error here, because it's a rounding error and is not fatal
+	}
+	if (timestamp > time_end && time_end != 0) {
+		LOG(ERR) << "Skipping buffer data: timestamp="<<timestamp<<" time_end="<<time_end;
+		uhd::time_spec_t ts = uhd::time_spec_t::from_ticks(timestamp, clk_rt);
+		LOG(DEBUG) << "Requested timestamp = " << timestamp << " (real_sec=" << std::fixed << ts.get_real_secs() << " = " << ts.to_ticks(clk_rt) << ") rate=" << clk_rt;
+		// Do not return error here, because it's a rounding error and is not fatal
+	}
+
 	// Starting index
 	size_t write_start = (data_start + (timestamp - time_start)) % buf_len;
 
@@ -1323,14 +1546,15 @@ ssize_t smpl_buf::write(void *buf, size_t len, TIMESTAMP timestamp)
 
 ssize_t smpl_buf::write(void *buf, size_t len, uhd::time_spec_t ts)
 {
-	return write(buf, len, convert_time(ts, clk_rt));
+	return write(buf, len, ts.to_ticks(clk_rt));
 }
 
-std::string smpl_buf::str_status() const
+std::string smpl_buf::str_status(size_t ts) const
 {
 	std::ostringstream ost("Sample buffer: ");
 
-	ost << "length = " << buf_len;
+	ost << "timestamp = " << ts;
+	ost << ", length = " << buf_len;
 	ost << ", time_start = " << time_start;
 	ost << ", time_end = " << time_end;
 	ost << ", data_start = " << data_start;
@@ -1355,8 +1579,8 @@ std::string smpl_buf::str_code(ssize_t code)
 	}
 }
 
-RadioDevice *RadioDevice::make(size_t sps, size_t chans,
-			       bool diversity, double offset)
+RadioDevice *RadioDevice::make(size_t tx_sps, size_t rx_sps,
+			       size_t chans, bool diversity, double offset)
 {
-	return new uhd_device(sps, chans, diversity, offset);
+	return new uhd_device(tx_sps, rx_sps, chans, diversity, offset);
 }

Transceiver52M/USRPDevice.cpp

@@ -59,7 +59,7 @@ const dboardConfigType dboardConfig = TXA_RXB;
 
 const double USRPDevice::masterClockRate = 52.0e6;
 
-USRPDevice::USRPDevice(size_t sps, size_t, bool)
+USRPDevice::USRPDevice(size_t sps)
 {
   LOG(INFO) << "creating USRP device...";
 
@@ -89,7 +89,7 @@ USRPDevice::USRPDevice(size_t sps, size_t, bool)
 #endif
 }
 
-int USRPDevice::open(const std::string &, bool)
+int USRPDevice::open(const std::string &, bool, bool)
 {
   writeLock.unlock();
 
@@ -600,7 +600,8 @@ bool USRPDevice::setTxFreq(double wFreq) { return true;};
 bool USRPDevice::setRxFreq(double wFreq) { return true;};
 #endif
 
-RadioDevice *RadioDevice::make(size_t sps, size_t chans, bool diversity)
+RadioDevice *RadioDevice::make(size_t tx_sps, size_t rx_sps,
+			       size_t chans, bool diversity, double)
 {
-	return new USRPDevice(sps, chans, diversity);
+	return new USRPDevice(tx_sps);
 }

Transceiver52M/USRPDevice.h

@@ -96,10 +96,10 @@ private:
  public:
 
   /** Object constructor */
-  USRPDevice(size_t sps, size_t chans = 1, bool diversity = false);
+  USRPDevice(size_t sps);
 
   /** Instantiate the USRP */
-  int open(const std::string &, bool);
+  int open(const std::string &, bool, bool);
 
   /** Start the USRP */
   bool start();

Transceiver52M/arm/convert.c

@@ -25,25 +25,25 @@
 #include "config.h"
 #endif
 
-void neon_convert_ps_si16_4n(short *, float *, float *, int);
-void neon_convert_si16_ps_4n(float *, short *, int);
+void neon_convert_ps_si16_4n(short *, const float *, const float *, int);
+void neon_convert_si16_ps_4n(float *, const short *, int);
 
 #ifndef HAVE_NEON
-static void convert_si16_ps(float *out, short *in, int len)
+static void convert_si16_ps(float *out, const short *in, int len)
 {
 	for (int i = 0; i < len; i++)
 		out[i] = in[i];
 }
 
-static void convert_ps_si16(short *out, float *in, float scale, int len)
+static void convert_ps_si16(short *out, const float *in, float scale, int len)
 {
 	for (int i = 0; i < len; i++)
 		out[i] = in[i] * scale;
 }
 #else
 /* 4*N 16-bit signed integer conversion with remainder */
-static void neon_convert_si16_ps(float *restrict out,
-				 short *restrict in,
+static void neon_convert_si16_ps(float *out,
+				 const short *in,
 				 int len)
 {
 	int start = len / 4 * 4;
@@ -55,9 +55,9 @@ static void neon_convert_si16_ps(float *restrict out,
 }
 
 /* 4*N 16-bit signed integer conversion with remainder */
-static void neon_convert_ps_si16(short *restrict out,
-				 float *restrict in,
-				 float *restrict scale,
+static void neon_convert_ps_si16(short *out,
+				 const float *in,
+				 const float *scale,
 				 int len)
 {
 	int start = len / 4 * 4;
@@ -69,7 +69,7 @@ static void neon_convert_ps_si16(short *restrict out,
 }
 #endif
 
-void convert_float_short(short *out, float *in, float scale, int len)
+void convert_float_short(short *out, const float *in, float scale, int len)
 {
 #ifdef HAVE_NEON
         float q[4] = { scale, scale, scale, scale };
@@ -83,7 +83,7 @@ void convert_float_short(short *out, float *in, float scale, int len)
 #endif
 }
 
-void convert_short_float(float *out, short *in, int len)
+void convert_short_float(float *out, const short *in, int len)
 {
 #ifdef HAVE_NEON
 	if (len % 4)

Transceiver52M/common/convert.h

@@ -1,7 +1,7 @@
 #ifndef _CONVERT_H_
 #define _CONVERT_H_
 
-void convert_float_short(short *out, float *in, float scale, int len);
-void convert_short_float(float *out, short *in, int len);
+void convert_float_short(short *out, const float *in, float scale, int len);
+void convert_short_float(float *out, const short *in, int len);
 
 #endif /* _CONVERT_H_ */

Transceiver52M/common/convolve.h

@@ -3,26 +3,26 @@
 
 void *convolve_h_alloc(int num);
 
-int convolve_real(float *x, int x_len,
-		  float *h, int h_len,
+int convolve_real(const float *x, int x_len,
+		  const float *h, int h_len,
 		  float *y, int y_len,
 		  int start, int len,
 		  int step, int offset);
 
-int convolve_complex(float *x, int x_len,
-		     float *h, int h_len,
+int convolve_complex(const float *x, int x_len,
+		     const float *h, int h_len,
 		     float *y, int y_len,
 		     int start, int len,
 		     int step, int offset);
 
-int base_convolve_real(float *x, int x_len,
-		       float *h, int h_len,
+int base_convolve_real(const float *x, int x_len,
+		       const float *h, int h_len,
 		       float *y, int y_len,
 		       int start, int len,
 		       int step, int offset);
 
-int base_convolve_complex(float *x, int x_len,
-			  float *h, int h_len,
+int base_convolve_complex(const float *x, int x_len,
+			  const float *h, int h_len,
 			  float *y, int y_len,
 			  int start, int len,
 			  int step, int offset);

Transceiver52M/common/convolve_base.c

@@ -26,21 +26,21 @@
 #endif
 
 /* Base multiply and accumulate complex-real */
-static void mac_real(float *x, float *h, float *y)
+static void mac_real(const float *x, const float *h, float *y)
 {
 	y[0] += x[0] * h[0];
 	y[1] += x[1] * h[0];
 }
 
 /* Base multiply and accumulate complex-complex */
-static void mac_cmplx(float *x, float *h, float *y)
+static void mac_cmplx(const float *x, const float *h, float *y)
 {
 	y[0] += x[0] * h[0] - x[1] * h[1];
 	y[1] += x[0] * h[1] + x[1] * h[0];
 }
 
 /* Base vector complex-complex multiply and accumulate */
-static void mac_real_vec_n(float *x, float *h, float *y,
+static void mac_real_vec_n(const float *x, const float *h, float *y,
 			   int len, int step, int offset)
 {
 	for (int i = offset; i < len; i += step)
@@ -48,7 +48,7 @@ static void mac_real_vec_n(float *x, float *h, float *y,
 }
 
 /* Base vector complex-complex multiply and accumulate */
-static void mac_cmplx_vec_n(float *x, float *h, float *y,
+static void mac_cmplx_vec_n(const float *x, const float *h, float *y,
 			    int len, int step, int offset)
 {
 	for (int i = offset; i < len; i += step)
@@ -56,8 +56,8 @@ static void mac_cmplx_vec_n(float *x, float *h, float *y,
 }
 
 /* Base complex-real convolution */
-int _base_convolve_real(float *x, int x_len,
-			float *h, int h_len,
+int _base_convolve_real(const float *x, int x_len,
+			const float *h, int h_len,
 			float *y, int y_len,
 			int start, int len,
 			int step, int offset)
@@ -73,8 +73,8 @@ int _base_convolve_real(float *x, int x_len,
 }
 
 /* Base complex-complex convolution */
-int _base_convolve_complex(float *x, int x_len,
-			   float *h, int h_len,
+int _base_convolve_complex(const float *x, int x_len,
+			   const float *h, int h_len,
 			   float *y, int y_len,
 			   int start, int len,
 			   int step, int offset)
@@ -110,8 +110,8 @@ int bounds_check(int x_len, int h_len, int y_len,
 }
 
 /* API: Non-aligned (no SSE) complex-real */
-int base_convolve_real(float *x, int x_len,
-		       float *h, int h_len,
+int base_convolve_real(const float *x, int x_len,
+		       const float *h, int h_len,
 		       float *y, int y_len,
 		       int start, int len,
 		       int step, int offset)
@@ -128,8 +128,8 @@ int base_convolve_real(float *x, int x_len,
 }
 
 /* API: Non-aligned (no SSE) complex-complex */
-int base_convolve_complex(float *x, int x_len,
-			  float *h, int h_len,
+int base_convolve_complex(const float *x, int x_len,
+			  const float *h, int h_len,
 			  float *y, int y_len,
 			  int start, int len,
 			  int step, int offset)

Transceiver52M/osmo-trx.cpp

@@ -37,14 +37,17 @@
  *     1 - Uses minimized modulator (less computation, more distortion)
  *
  *     Other values are invalid. Receive path (uplink) is always
- *     downsampled to 1 sps. Default to 4 sps for all cases except for
- *     ARM and non-SIMD enabled architectures.
+ *     downsampled to 1 sps. Default to 4 sps for all cases.
  */
-#if defined(HAVE_NEON) || !defined(HAVE_SSE3)
-#define DEFAULT_SPS		1
-#else
-#define DEFAULT_SPS		4
-#endif
+#define DEFAULT_TX_SPS		4
+
+/*
+ * Samples-per-symbol for uplink (receiver) path
+ *     Do not modify this value. EDGE configures 4 sps automatically on
+ *     B200/B210 devices only. Use of 4 sps on the receive path for other
+ *     configurations is not supported.
+ */
+#define DEFAULT_RX_SPS		1
 
 /* Default configuration parameters
  *     Note that these values are only used if the particular key does not
@@ -63,12 +66,17 @@ struct trx_config {
 	std::string addr;
 	std::string dev_args;
 	unsigned port;
-	unsigned sps;
+	unsigned tx_sps;
+	unsigned rx_sps;
 	unsigned chans;
+	unsigned rtsc;
 	bool extref;
-	bool filler;
+	Transceiver::FillerType filler;
 	bool diversity;
 	double offset;
+	double rssi_offset;
+	bool swap_channels;
+	bool edge;
 };
 
 ConfigurationTable gConfig;
@@ -118,7 +126,7 @@ bool testConfig()
  */
 bool trx_setup_config(struct trx_config *config)
 {
-	std::string refstr, fillstr, divstr;
+	std::string refstr, fillstr, divstr, edgestr;
 
 	if (!testConfig())
 		return false;
@@ -154,19 +162,30 @@ bool trx_setup_config(struct trx_config *config)
 			config->diversity = DEFAULT_DIVERSITY;
 	}
 
-	if (!config->sps)
-		config->sps = DEFAULT_SPS;
-
-	if (!config->chans)
-		config->chans = DEFAULT_CHANS;
-
 	/* Diversity only supported on 2 channels */
 	if (config->diversity)
 		config->chans = 2;
 
+	edgestr = config->edge ? "Enabled" : "Disabled";
 	refstr = config->extref ? "Enabled" : "Disabled";
-	fillstr = config->filler ? "Enabled" : "Disabled";
 	divstr = config->diversity ? "Enabled" : "Disabled";
+	switch (config->filler) {
+	case Transceiver::FILLER_DUMMY:
+		fillstr = "Dummy bursts";
+		break;
+	case Transceiver::FILLER_ZERO:
+		fillstr = "Disabled";
+		break;
+	case Transceiver::FILLER_NORM_RAND:
+		fillstr = "Normal busrts with random payload";
+		break;
+	case Transceiver::FILLER_EDGE_RAND:
+		fillstr = "EDGE busrts with random payload";
+		break;
+	case Transceiver::FILLER_ACCESS_RAND:
+		fillstr = "Access busrts with random payload";
+		break;
+	}
 
 	std::ostringstream ost("");
 	ost << "Config Settings" << std::endl;
@@ -175,11 +194,15 @@ bool trx_setup_config(struct trx_config *config)
 	ost << "   TRX Base Port........... " << config->port << std::endl;
 	ost << "   TRX Address............. " << config->addr << std::endl;
 	ost << "   Channels................ " << config->chans << std::endl;
-	ost << "   Samples-per-Symbol...... " << config->sps << std::endl;
+	ost << "   Tx Samples-per-Symbol... " << config->tx_sps << std::endl;
+	ost << "   Rx Samples-per-Symbol... " << config->rx_sps << std::endl;
+	ost << "   EDGE support............ " << edgestr << std::endl;
 	ost << "   External Reference...... " << refstr << std::endl;
 	ost << "   C0 Filler Table......... " << fillstr << std::endl;
 	ost << "   Diversity............... " << divstr << std::endl;
 	ost << "   Tuning offset........... " << config->offset << std::endl;
+	ost << "   RSSI to dBm offset...... " << config->rssi_offset << std::endl;
+	ost << "   Swap channels........... " << config->swap_channels << std::endl;
 	std::cout << ost << std::endl;
 
 	return true;
@@ -197,18 +220,23 @@ RadioInterface *makeRadioInterface(struct trx_config *config,
 {
 	RadioInterface *radio = NULL;
 
+	if ((config->rx_sps != 1) && (type != RadioDevice::NORMAL)) {
+		LOG(ALERT) << "Unsupported radio interface configuration";
+	}
+
 	switch (type) {
 	case RadioDevice::NORMAL:
-		radio = new RadioInterface(usrp, config->sps, config->chans);
+		radio = new RadioInterface(usrp, config->tx_sps,
+					   config->rx_sps, config->chans);
 		break;
 	case RadioDevice::RESAMP_64M:
 	case RadioDevice::RESAMP_100M:
-		radio = new RadioInterfaceResamp(usrp,
-						 config->sps, config->chans);
+		radio = new RadioInterfaceResamp(usrp, config->tx_sps,
+						 config->chans);
 		break;
 	case RadioDevice::DIVERSITY:
-		radio = new RadioInterfaceDiversity(usrp,
-						    config->sps, config->chans);
+		radio = new RadioInterfaceDiversity(usrp, config->tx_sps,
+						    config->chans);
 		break;
 	default:
 		LOG(ALERT) << "Unsupported radio interface configuration";
@@ -234,9 +262,10 @@ Transceiver *makeTransceiver(struct trx_config *config, RadioInterface *radio)
 	Transceiver *trx;
 	VectorFIFO *fifo;
 
-	trx = new Transceiver(config->port, config->addr.c_str(), config->sps,
-			      config->chans, GSM::Time(3,0), radio);
-	if (!trx->init(config->filler)) {
+	trx = new Transceiver(config->port, config->addr.c_str(),
+			      config->tx_sps, config->rx_sps, config->chans,
+			      GSM::Time(3,0), radio, config->rssi_offset);
+	if (!trx->init(config->filler, config->rtsc)) {
 		LOG(ALERT) << "Failed to initialize transceiver";
 		delete trx;
 		return NULL;
@@ -281,12 +310,17 @@ static void print_help()
 		"  -l    Logging level (%s)\n"
 		"  -i    IP address of GSM core\n"
 		"  -p    Base port number\n"
+		"  -e    Enable EDGE receiver\n"
 		"  -d    Enable dual channel diversity receiver\n"
 		"  -x    Enable external 10 MHz reference\n"
 		"  -s    Samples-per-symbol (1 or 4)\n"
 		"  -c    Number of ARFCN channels (default=1)\n"
 		"  -f    Enable C0 filler table\n"
-		"  -o    Set baseband frequency offset (default=auto)\n",
+		"  -o    Set baseband frequency offset (default=auto)\n"
+		"  -r    Random burst test mode with TSC\n"
+		"  -A    Random burst test mode with Access Bursts\n"
+		"  -R    RSSI to dBm offset in dB (default=0)\n"
+		"  -S    Swap channels (UmTRX only)\n",
 		"EMERG, ALERT, CRT, ERR, WARNING, NOTICE, INFO, DEBUG");
 }
 
@@ -295,14 +329,19 @@ static void handle_options(int argc, char **argv, struct trx_config *config)
 	int option;
 
 	config->port = 0;
-	config->sps = 0;
-	config->chans = 0;
+	config->tx_sps = DEFAULT_TX_SPS;
+	config->rx_sps = DEFAULT_RX_SPS;
+	config->chans = DEFAULT_CHANS;
+	config->rtsc = 0;
 	config->extref = false;
-	config->filler = false;
+	config->filler = Transceiver::FILLER_ZERO;
 	config->diversity = false;
 	config->offset = 0.0;
+	config->rssi_offset = 0.0;
+	config->swap_channels = false;
+	config->edge = false;
 
-	while ((option = getopt(argc, argv, "ha:l:i:p:c:dxfo:s:")) != -1) {
+	while ((option = getopt(argc, argv, "ha:l:i:p:c:dxfo:s:r:AR:Se")) != -1) {
 		switch (option) {
 		case 'h':
 			print_help();
@@ -330,24 +369,57 @@ static void handle_options(int argc, char **argv, struct trx_config *config)
 			config->extref = true;
 			break;
 		case 'f':
-			config->filler = true;
+			config->filler = Transceiver::FILLER_DUMMY;
 			break;
 		case 'o':
 			config->offset = atof(optarg);
 			break;
 		case 's':
-			config->sps = atoi(optarg);
-			if ((config->sps != 1) && (config->sps != 4)) {
-				printf("Unsupported samples-per-symbol\n\n");
-				print_help();
-				exit(0);
-			}
+			config->tx_sps = atoi(optarg);
+			break;
+		case 'r':
+			config->rtsc = atoi(optarg);
+			config->filler = Transceiver::FILLER_NORM_RAND;
+			break;
+		case 'A':
+			config->filler = Transceiver::FILLER_ACCESS_RAND;
+			break;
+		case 'R':
+			config->rssi_offset = atof(optarg);
+			break;
+		case 'S':
+			config->swap_channels = true;
+			break;
+		case 'e':
+			config->edge = true;
+			config->rx_sps = 4;
 			break;
 		default:
 			print_help();
 			exit(0);
 		}
 	}
+
+	if (config->edge && (config->filler == Transceiver::FILLER_NORM_RAND))
+		config->filler = Transceiver::FILLER_EDGE_RAND;
+
+	if ((config->tx_sps != 1) && (config->tx_sps != 4)) {
+		printf("Unsupported samples-per-symbol %i\n\n", config->tx_sps);
+		print_help();
+		exit(0);
+	}
+
+	if (config->edge && (config->tx_sps != 4)) {
+		printf("EDGE only supported at 4 samples per symbol\n\n");
+		print_help();
+		exit(0);
+	}
+
+	if (config->rtsc > 7) {
+		printf("Invalid training sequence %i\n\n", config->rtsc);
+		print_help();
+		exit(0);
+	}
 }
 
 int main(int argc, char *argv[])
@@ -373,9 +445,9 @@ int main(int argc, char *argv[])
 	srandom(time(NULL));
 
 	/* Create the low level device object */
-	usrp = RadioDevice::make(config.sps, config.chans,
+	usrp = RadioDevice::make(config.tx_sps, config.rx_sps, config.chans,
 				 config.diversity, config.offset);
-	type = usrp->open(config.dev_args, config.extref);
+	type = usrp->open(config.dev_args, config.extref, config.swap_channels);
 	if (type < 0) {
 		LOG(ALERT) << "Failed to create radio device" << std::endl;
 		goto shutdown;
@@ -391,8 +463,6 @@ int main(int argc, char *argv[])
 	if (!trx)
 		goto shutdown;
 
-	trx->start();
-
 	chans = trx->numChans();
 	std::cout << "-- Transceiver active with "
 		  << chans << " channel(s)" << std::endl;

Transceiver52M/radioClock.cpp

@@ -23,32 +23,27 @@
 
 void RadioClock::set(const GSM::Time& wTime)
 {
-	mLock.lock();
+	ScopedLock lock(mLock);
 	mClock = wTime;
 	updateSignal.signal();
-	mLock.unlock();
 }
 
 void RadioClock::incTN()
 {
-	mLock.lock();
+	ScopedLock lock(mLock);
 	mClock.incTN();
 	updateSignal.signal();
-	mLock.unlock();
 }
 
 GSM::Time RadioClock::get()
 {
-	mLock.lock();
+	ScopedLock lock(mLock);
 	GSM::Time retVal = mClock;
-	mLock.unlock();
-
 	return retVal;
 }
 
 void RadioClock::wait()
 {
-	mLock.lock();
+	ScopedLock lock(mLock);
 	updateSignal.wait(mLock,1);
-	mLock.unlock();
 }

Transceiver52M/radioDevice.h

@@ -37,11 +37,11 @@ class RadioDevice {
   /* Radio interface types */
   enum RadioInterfaceType { NORMAL, RESAMP_64M, RESAMP_100M, DIVERSITY };
 
-  static RadioDevice *make(size_t sps, size_t chans = 1,
+  static RadioDevice *make(size_t tx_sps, size_t rx_sps = 1, size_t chans = 1,
                            bool diversity = false, double offset = 0.0);
 
   /** Initialize the USRP */
-  virtual int open(const std::string &args = "", bool extref = false)=0;
+  virtual int open(const std::string &args = "", bool extref = false, bool swap_channels = false)=0;
 
   virtual ~RadioDevice() { }
 

Transceiver52M/radioInterface.cpp

@@ -33,12 +33,12 @@ extern "C" {
 #define CHUNK		625
 #define NUMCHUNKS	4
 
-RadioInterface::RadioInterface(RadioDevice *wRadio,
-                               size_t sps, size_t chans, size_t diversity,
+RadioInterface::RadioInterface(RadioDevice *wRadio, size_t tx_sps,
+                               size_t rx_sps, size_t chans, size_t diversity,
                                int wReceiveOffset, GSM::Time wStartTime)
-  : mRadio(wRadio), mSPSTx(sps), mSPSRx(1), mChans(chans), mMIMO(diversity),
-    sendCursor(0), recvCursor(0), underrun(false), overrun(false),
-    receiveOffset(wReceiveOffset), mOn(false)
+  : mRadio(wRadio), mSPSTx(tx_sps), mSPSRx(rx_sps), mChans(chans),
+    mMIMO(diversity), sendCursor(0), recvCursor(0), underrun(false),
+    overrun(false), receiveOffset(wReceiveOffset), mOn(false)
 {
   mClock.set(wStartTime);
 }
@@ -106,23 +106,27 @@ double RadioInterface::fullScaleOutputValue(void) {
   return mRadio->fullScaleOutputValue();
 }
 
-
-void RadioInterface::setPowerAttenuation(double atten, size_t chan)
+int RadioInterface::setPowerAttenuation(int atten, size_t chan)
 {
   double rfGain, digAtten;
 
   if (chan >= mChans) {
     LOG(ALERT) << "Invalid channel requested";
-    return;
+    return -1;
   }
 
-  rfGain = mRadio->setTxGain(mRadio->maxTxGain() - atten, chan);
-  digAtten = atten - mRadio->maxTxGain() + rfGain;
+  if (atten < 0.0)
+    atten = 0.0;
+
+  rfGain = mRadio->setTxGain(mRadio->maxTxGain() - (double) atten, chan);
+  digAtten = (double) atten - mRadio->maxTxGain() + rfGain;
 
   if (digAtten < 1.0)
     powerScaling[chan] = 1.0;
   else
     powerScaling[chan] = 1.0 / sqrt(pow(10, digAtten / 10.0));
+
+  return atten;
 }
 
 int RadioInterface::radioifyVector(signalVector &wVector,
@@ -167,15 +171,23 @@ bool RadioInterface::tuneRx(double freq, size_t chan)
   return mRadio->setRxFreq(freq, chan);
 }
 
-
-void RadioInterface::start()
+bool RadioInterface::start()
 {
-  LOG(INFO) << "Starting radio";
+  if (mOn)
+    return true;
+
+  LOG(INFO) << "Starting radio device";
 #ifdef USRP1
   mAlignRadioServiceLoopThread.start((void * (*)(void*))AlignRadioServiceLoopAdapter,
                                      (void*)this);
 #endif
-  mRadio->start();
+
+  if (!mRadio->start())
+    return false;
+
+  recvCursor = 0;
+  sendCursor = 0;
+
   writeTimestamp = mRadio->initialWriteTimestamp();
   readTimestamp = mRadio->initialReadTimestamp();
 
@@ -184,6 +196,23 @@ void RadioInterface::start()
 
   mOn = true;
   LOG(INFO) << "Radio started";
+  return true;
+}
+
+/*
+ * Stop the radio device
+ *
+ * This is a pass-through call to the device interface. Because the underlying
+ * stop command issuance generally doesn't return confirmation on device status,
+ * this call will only return false if the device is already stopped.
+ */
+bool RadioInterface::stop()
+{
+  if (!mOn || !mRadio->stop())
+    return false;
+
+  mOn = false;
+  return true;
 }
 
 #ifdef USRP1
@@ -233,7 +262,12 @@ bool RadioInterface::driveReceiveRadio()
   int recvSz = recvCursor;
   int readSz = 0;
   const int symbolsPerSlot = gSlotLen + 8;
-  int burstSize = (symbolsPerSlot + (tN % 4 == 0)) * mSPSRx;
+  int burstSize;
+
+  if (mSPSRx == 4)
+    burstSize = 625;
+  else
+    burstSize = symbolsPerSlot + (tN % 4 == 0);
 
   /* 
    * Pre-allocate head room for the largest correlation size
@@ -268,6 +302,7 @@ bool RadioInterface::driveReceiveRadio()
 
     tN = rcvClock.TN();
 
+    if (mSPSRx != 4)
       burstSize = (symbolsPerSlot + (tN % 4 == 0)) * mSPSRx;
   }
 

Transceiver52M/radioInterface.h

@@ -78,7 +78,8 @@ private:
 public:
 
   /** start the interface */
-  void start();
+  bool start();
+  bool stop();
 
   /** intialization */
   virtual bool init(int type);
@@ -86,7 +87,8 @@ public:
 
   /** constructor */
   RadioInterface(RadioDevice* wRadio = NULL,
-                 size_t sps = 4, size_t chans = 1, size_t diversity = 1,
+                 size_t tx_sps = 4, size_t rx_sps = 1,
+		 size_t chans = 1, size_t diversity = 1,
                  int receiveOffset = 3, GSM::Time wStartTime = GSM::Time(0));
 
   /** destructor */
@@ -120,7 +122,7 @@ public:
   /** drive reception of GSM bursts */
   bool driveReceiveRadio();
 
-  void setPowerAttenuation(double atten, size_t chan = 0);
+  int setPowerAttenuation(int atten, size_t chan = 0);
 
   /** returns the full-scale transmit amplitude **/
   double fullScaleInputValue();

Transceiver52M/sigProcLib.h

@@ -20,6 +20,11 @@
 #include "BitVector.h"
 #include "signalVector.h"
 
+/* Burst lengths */
+#define NORMAL_BURST_NBITS		148
+#define EDGE_BURST_NBITS		444
+#define EDGE_BURST_NSYMS		(EDGE_BURST_NBITS / 3)
+
 /** Convolution type indicator */
 enum ConvType {
   START_ONLY,
@@ -28,6 +33,14 @@ enum ConvType {
   UNDEFINED,
 };
 
+enum signalError {
+  SIGERR_NONE,
+  SIGERR_BOUNDS,
+  SIGERR_CLIP,
+  SIGERR_UNSUPPORTED,
+  SIGERR_INTERNAL,
+};
+
 /** Convert a linear number to a dB value */
 float dB(float x);
 
@@ -41,7 +54,7 @@ float vectorNorm2(const signalVector &x);
 float vectorPower(const signalVector &x);
 
 /** Setup the signal processing library */
-bool sigProcLibSetup(int sps);
+bool sigProcLibSetup();
 
 /** Destroy the signal processing library */
 void sigProcLibDestroy(void);
@@ -96,6 +109,25 @@ signalVector *modulateBurst(const BitVector &wBurst,
 			    int guardPeriodLength,
 			    int sps, bool emptyPulse = false);
 
+/** 8-PSK modulate a burst of bits */
+signalVector *modulateEdgeBurst(const BitVector &bits,
+                                int sps, bool emptyPulse = false);
+
+/** Generate a EDGE burst with random payload - 4 SPS (625 samples) only */
+signalVector *generateEdgeBurst(int tsc);
+
+/** Generate an empty burst - 4 or 1 SPS */
+signalVector *generateEmptyBurst(int sps, int tn);
+
+/** Generate a normal GSM burst with random payload - 4 or 1 SPS */
+signalVector *genRandNormalBurst(int tsc, int sps, int tn);
+
+/** Generate an access GSM burst with random payload - 4 or 1 SPS */
+signalVector *genRandAccessBurst(int sps, int tn);
+
+/** Generate a dummy GSM burst - 4 or 1 SPS */
+signalVector *generateDummyBurst(int sps, int tn);
+
 /** Sinc function */
 float sinc(float x);
 
@@ -143,22 +175,6 @@ complex peakDetect(const signalVector &rxBurst,
 void scaleVector(signalVector &x,
 		 complex scale);
 
-/**
-        Generate a modulated GSM midamble, stored within the library.
-        @param gsmPulse The GSM pulse used for modulation.
-        @param sps The number of samples per GSM symbol.
-        @param TSC The training sequence [0..7]
-        @return Success.
-*/
-bool generateMidamble(int sps, int tsc);
-/**
-        Generate a modulated RACH sequence, stored within the library.
-        @param gsmPulse The GSM pulse used for modulation.
-        @param sps The number of samples per GSM symbol.
-        @return Success.
-*/
-bool generateRACHSequence(int sps);
-
 /**
         Energy detector, checks to see if received burst energy is above a threshold.
         @param rxBurst The received GSM burst of interest.
@@ -179,13 +195,15 @@ bool energyDetect(signalVector &rxBurst,
         @param sps The number of samples per GSM symbol.
         @param amplitude The estimated amplitude of received RACH burst.
         @param TOA The estimate time-of-arrival of received RACH burst.
+        @param maxTOA The maximum expected time-of-arrival
         @return positive if threshold value is reached, negative on error, zero otherwise
 */
 int detectRACHBurst(signalVector &rxBurst,
                     float detectThreshold,
                     int sps,
-                    complex *amplitude,
-                    float* TOA);
+                    complex &amplitude,
+                    float &TOA,
+                    unsigned maxTOA);
 
 /**
         Normal burst correlator, detector, channel estimator.
@@ -205,12 +223,36 @@ int analyzeTrafficBurst(signalVector &rxBurst,
                         unsigned TSC,
                         float detectThreshold,
                         int sps,
-			complex *amplitude,
-			float *TOA,
-                        unsigned maxTOA,
-                        bool requestChannel = false,
-			signalVector** channelResponse = NULL,
-			float *channelResponseOffset = NULL);
+                        complex &amplitude,
+                        float &TOA,
+                        unsigned maxTOA);
+
+/**
+        EDGE burst detector
+        @param burst The received GSM burst of interest
+ 
+        @param detectThreshold The threshold that the received burst's post-correlator SNR is compared against to determine validity.
+        @param sps The number of samples per GSM symbol.
+        @param amplitude The estimated amplitude of received TSC burst.
+        @param TOA The estimate time-of-arrival of received TSC burst.
+        @param maxTOA The maximum expected time-of-arrival
+        @return positive if threshold value is reached, negative on error, zero otherwise
+*/
+int detectEdgeBurst(signalVector &burst,
+                    unsigned TSC,
+                    float detectThreshold,
+                    int sps,
+                    complex &amplitude,
+                    float &TOA,
+                    unsigned maxTOA);
+
+/**
+	Downsample 4 SPS to 1 SPS using a polyphase filterbank
+        @param burst Input burst of at least 624 symbols
+        @return Decimated signal vector of 156 symbols
+*/
+
+signalVector *downsampleBurst(signalVector &burst);
 
 /**
 	Decimate a vector.
@@ -233,33 +275,14 @@ SoftVector *demodulateBurst(signalVector &rxBurst, int sps,
                             complex channel, float TOA);
 
 /**
-	Design the necessary filters for a decision-feedback equalizer.
-	@param channelResponse The multipath channel that we're mitigating.
-	@param SNRestimate The signal-to-noise estimate of the channel, a linear value
-	@param Nf The number of taps in the feedforward filter.
-	@param feedForwardFilter The designed feed forward filter.
-	@param feedbackFilter The designed feedback filter.
-	@return True if DFE can be designed.
-*/
-bool designDFE(signalVector &channelResponse,
-	       float SNRestimate,
-	       int Nf,
-	       signalVector **feedForwardFilter,
-	       signalVector **feedbackFilter);
-
-/**
-	Equalize/demodulate a received burst via a decision-feedback equalizer.
-	@param rxBurst The received burst to be demodulated.
-	@param TOA The time-of-arrival of the received burst.
+        Demodulate 8-PSK EDGE burst with soft symbol ooutput
+	@param rxBurst The burst to be demodulated.
         @param sps The number of samples per GSM symbol.
-	@param w The feed forward filter of the DFE.
-	@param b The feedback filter of the DFE.
+        @param channel The amplitude estimate of the received burst.
+        @param TOA The time-of-arrival of the received burst.
         @return The demodulated bit sequence.
 */
-SoftVector *equalizeBurst(signalVector &rxBurst,
-		       float TOA,
-		       int sps,
-		       signalVector &w, 
-		       signalVector &b);
+SoftVector *demodEdgeBurst(signalVector &rxBurst, int sps,
+                           complex channel, float TOA);
 
 #endif /* SIGPROCLIB_H */

Transceiver52M/x86/convert.c

@@ -34,7 +34,7 @@
 
 /* 16*N 16-bit signed integer converted to single precision floats */
 static void _sse_convert_si16_ps_16n(float *restrict out,
-				     short *restrict in,
+				     const short *restrict in,
 				     int len)
 {
 	__m128i m0, m1, m2, m3, m4, m5;
@@ -69,7 +69,7 @@ static void _sse_convert_si16_ps_16n(float *restrict out,
 
 /* 16*N 16-bit signed integer conversion with remainder */
 static void _sse_convert_si16_ps(float *restrict out,
-				 short *restrict in,
+				 const short *restrict in,
 				 int len)
 {
 	int start = len / 16 * 16;
@@ -83,7 +83,7 @@ static void _sse_convert_si16_ps(float *restrict out,
 
 /* 8*N single precision floats scaled and converted to 16-bit signed integer */
 static void _sse_convert_scale_ps_si16_8n(short *restrict out,
-					  float *restrict in,
+					  const float *restrict in,
 					  float scale, int len)
 {
 	__m128 m0, m1, m2;
@@ -111,7 +111,7 @@ static void _sse_convert_scale_ps_si16_8n(short *restrict out,
 
 /* 8*N single precision floats scaled and converted with remainder */
 static void _sse_convert_scale_ps_si16(short *restrict out,
-				       float *restrict in,
+				       const float *restrict in,
 				       float scale, int len)
 {
 	int start = len / 8 * 8;
@@ -124,7 +124,7 @@ static void _sse_convert_scale_ps_si16(short *restrict out,
 
 /* 16*N single precision floats scaled and converted to 16-bit signed integer */
 static void _sse_convert_scale_ps_si16_16n(short *restrict out,
-					   float *restrict in,
+					   const float *restrict in,
 					   float scale, int len)
 {
 	__m128 m0, m1, m2, m3, m4;
@@ -158,7 +158,8 @@ static void _sse_convert_scale_ps_si16_16n(short *restrict out,
 	}
 }
 #else /* HAVE_SSE3 */
-static void convert_scale_ps_si16(short *out, float *in, float scale, int len)
+static void convert_scale_ps_si16(short *out, const float *in,
+				  float scale, int len)
 {
 	for (int i = 0; i < len; i++)
 		out[i] = in[i] * scale;
@@ -166,14 +167,14 @@ static void convert_scale_ps_si16(short *out, float *in, float scale, int len)
 #endif
 
 #ifndef HAVE_SSE4_1
-static void convert_si16_ps(float *out, short *in, int len)
+static void convert_si16_ps(float *out, const short *in, int len)
 {
 	for (int i = 0; i < len; i++)
 		out[i] = in[i];
 }
 #endif
 
-void convert_float_short(short *out, float *in, float scale, int len)
+void convert_float_short(short *out, const float *in, float scale, int len)
 {
 #ifdef HAVE_SSE3
 	if (!(len % 16))
@@ -187,7 +188,7 @@ void convert_float_short(short *out, float *in, float scale, int len)
 #endif
 }
 
-void convert_short_float(float *out, short *in, int len)
+void convert_short_float(float *out, const short *in, int len)
 {
 #ifdef HAVE_SSE4_1
 	if (!(len % 16))

Transceiver52M/x86/convolve.c

@@ -27,14 +27,14 @@
 #endif
 
 /* Forward declarations from base implementation */
-int _base_convolve_real(float *x, int x_len,
-			float *h, int h_len,
+int _base_convolve_real(const float *x, int x_len,
+			const float *h, int h_len,
 			float *y, int y_len,
 			int start, int len,
 			int step, int offset);
 
-int _base_convolve_complex(float *x, int x_len,
-			   float *h, int h_len,
+int _base_convolve_complex(const float *x, int x_len,
+			   const float *h, int h_len,
 			   float *y, int y_len,
 			   int start, int len,
 			   int step, int offset);
@@ -47,8 +47,8 @@ int bounds_check(int x_len, int h_len, int y_len,
 #include <pmmintrin.h>
 
 /* 4-tap SSE complex-real convolution */
-static void sse_conv_real4(float *restrict x,
-			   float *restrict h,
+static void sse_conv_real4(const float *restrict x,
+			   const float *restrict h,
 			   float *restrict y,
 			   int len)
 {
@@ -81,8 +81,8 @@ static void sse_conv_real4(float *restrict x,
 }
 
 /* 8-tap SSE complex-real convolution */
-static void sse_conv_real8(float *restrict x,
-			   float *restrict h,
+static void sse_conv_real8(const float *restrict x,
+			   const float *restrict h,
 			   float *restrict y,
 			   int len)
 {
@@ -128,8 +128,8 @@ static void sse_conv_real8(float *restrict x,
 }
 
 /* 12-tap SSE complex-real convolution */
-static void sse_conv_real12(float *restrict x,
-			    float *restrict h,
+static void sse_conv_real12(const float *restrict x,
+			    const float *restrict h,
 			    float *restrict y,
 			    int len)
 {
@@ -190,8 +190,8 @@ static void sse_conv_real12(float *restrict x,
 }
 
 /* 16-tap SSE complex-real convolution */
-static void sse_conv_real16(float *restrict x,
-			    float *restrict h,
+static void sse_conv_real16(const float *restrict x,
+			    const float *restrict h,
 			    float *restrict y,
 			    int len)
 {
@@ -265,8 +265,8 @@ static void sse_conv_real16(float *restrict x,
 }
 
 /* 20-tap SSE complex-real convolution */
-static void sse_conv_real20(float *restrict x,
-			    float *restrict h,
+static void sse_conv_real20(const float *restrict x,
+			    const float *restrict h,
 			    float *restrict y,
 			    int len)
 {
@@ -351,7 +351,10 @@ static void sse_conv_real20(float *restrict x,
 }
 
 /* 4*N-tap SSE complex-real convolution */
-static void sse_conv_real4n(float *x, float *h, float *y, int h_len, int len)
+static void sse_conv_real4n(const float *x,
+			    const float *h,
+			    float *y,
+			    int h_len, int len)
 {
 	__m128 m0, m1, m2, m4, m5, m6, m7;
 
@@ -391,7 +394,10 @@ static void sse_conv_real4n(float *x, float *h, float *y, int h_len, int len)
 }
 
 /* 4*N-tap SSE complex-complex convolution */
-static void sse_conv_cmplx_4n(float *x, float *h, float *y, int h_len, int len)
+static void sse_conv_cmplx_4n(const float *x,
+			      const float *h,
+			      float *y,
+			      int h_len, int len)
 {
 	__m128 m0, m1, m2, m3, m4, m5, m6, m7;
 
@@ -439,7 +445,10 @@ static void sse_conv_cmplx_4n(float *x, float *h, float *y, int h_len, int len)
 }
 
 /* 8*N-tap SSE complex-complex convolution */
-static void sse_conv_cmplx_8n(float *x, float *h, float *y, int h_len, int len)
+static void sse_conv_cmplx_8n(const float *x,
+			      const float *h,
+			      float *y,
+			      int h_len, int len)
 {
 	__m128 m0, m1, m2, m3, m4, m5, m6, m7;
 	__m128 m8, m9, m10, m11, m12, m13, m14, m15;
@@ -511,14 +520,16 @@ static void sse_conv_cmplx_8n(float *x, float *h, float *y, int h_len, int len)
 #endif
 
 /* API: Aligned complex-real */
-int convolve_real(float *x, int x_len,
-		  float *h, int h_len,
+int convolve_real(const float *x, int x_len,
+		  const float *h, int h_len,
 		  float *y, int y_len,
 		  int start, int len,
 		  int step, int offset)
 {
-	void (*conv_func)(float *, float *, float *, int) = NULL;
-	void (*conv_func_n)(float *, float *, float *, int, int) = NULL;
+	void (*conv_func)(const float *, const float *,
+			  float *, int) = NULL;
+	void (*conv_func_n)(const float *, const float *,
+			    float *, int, int) = NULL;
 
 	if (bounds_check(x_len, h_len, y_len, start, len, step) < 0)
 		return -1;
@@ -566,13 +577,14 @@ int convolve_real(float *x, int x_len,
 }
 
 /* API: Aligned complex-complex */
-int convolve_complex(float *x, int x_len,
-		     float *h, int h_len,
+int convolve_complex(const float *x, int x_len,
+		     const float *h, int h_len,
 		     float *y, int y_len,
 		     int start, int len,
 		     int step, int offset)
 {
-	void (*conv_func)(float *, float *, float *, int, int) = NULL;
+	void (*conv_func)(const float *, const float *,
+			  float *, int, int) = NULL;
 
 	if (bounds_check(x_len, h_len, y_len, start, len, step) < 0)
 		return -1;

configure.ac

@@ -29,7 +29,7 @@ AC_CANONICAL_BUILD
 AC_CANONICAL_HOST
 AC_CANONICAL_TARGET
 
-AM_INIT_AUTOMAKE
+AM_INIT_AUTOMAKE([subdir-objects])
 
 dnl Linux kernel KBuild style compile messages
 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
@@ -78,6 +78,11 @@ AC_ARG_WITH(neon-vfpv4, [
         [enable ARM NEON FMA support])
 ])
 
+AC_ARG_WITH(sse, [
+    AS_HELP_STRING([--with-sse],
+        [enable x86 SSE support (default)])
+])
+
 AS_IF([test "x$with_neon" = "xyes"], [
     AC_DEFINE(HAVE_NEON, 1, Support ARM NEON)
 ])
@@ -92,8 +97,11 @@ AS_IF([test "x$with_usrp1" = "xyes"], [
 ])
 
 AS_IF([test "x$with_usrp1" != "xyes"],[
-    PKG_CHECK_MODULES(UHD, uhd >= 003.004.000)
-    AC_DEFINE(USE_UHD, 1, Define to 1 if using UHD)
+    PKG_CHECK_MODULES(UHD, uhd >= 003.009,
+        [AC_DEFINE(USE_UHD_3_9, 1, UHD version 3.9.0 or higher)],
+        [PKG_CHECK_MODULES(UHD, uhd >= 003.005.004)]
+    )
+    AC_DEFINE(USE_UHD, 1, All UHD versions)
 ])
 
 AS_IF([test "x$with_singledb" = "xyes"], [
@@ -101,7 +109,9 @@ AS_IF([test "x$with_singledb" = "xyes"], [
 ])
 
 # Find and define supported SIMD extensions
+AS_IF([test "x$with_sse" != "xno"], [
     AX_EXT
+])
 
 AM_CONDITIONAL(USRP1, [test "x$with_usrp1" = "xyes"])
 AM_CONDITIONAL(ARCH_ARM, [test "x$with_neon" = "xyes" || test "x$with_neon_vfpv4" = "xyes"])

debian/changelog

@@ -0,0 +1,11 @@
+osmo-trx (0.1.9) trusty; urgency=medium
+
+  * Ask Ivan, really
+
+ -- Kirill Zakharenko <earwin@gmail.com>  Thu, 16 Jul 2015 12:13:46 +0000
+
+osmo-trx (0.1.8) precise; urgency=low
+
+     * Initial release (Closes: #nnnn) <nnnn is the bug number of your ITP
+
+ -- Ivan Klyuchnikov <Ivan.Kluchnikov@fairwaves.ru>  Sun, 9 Mar 2014 14:10:10 +0400

debian/compat

@@ -0,0 +1 @@
+9

debian/control

@@ -0,0 +1,24 @@
+Source: osmo-trx
+Maintainer: Ivan Klyuchnikov <ivan.kluchnikov@fairwaves.ru>
+Section: net
+Priority: optional
+Standards-Version: 3.9.3
+Build-Depends: debhelper (>= 9), autotools-dev, libdbd-sqlite3, pkg-config, dh-autoreconf, libuhd-dev, libusb-1.0-0-dev, libboost-all-dev, hardening-wrapper
+Homepage: http://openbsc.osmocom.org/trac/wiki/OsmoTRX
+Vcs-Git: git://git.osmocom.org/osmo-trx
+Vcs-Browser: http://cgit.osmocom.org/osmo-trx
+
+Package: osmo-trx
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, libdbd-sqlite3
+Description: OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS
+
+Package: osmo-trx-dbg
+Architecture: any
+Section: debug
+Priority: extra
+Depends: osmo-trx (= ${binary:Version}), ${misc:Depends}
+Description: Debug symbols for the osmo-trx
+ Make debugging possible
+
+

debian/copyright

@@ -0,0 +1,25 @@
+The Debian packaging is:
+
+    Copyright (C) 2014 Max <max.suraev@fairwaves.ru>
+
+It was downloaded from:
+
+    git://git.osmocom.org/osmo-trx
+
+Upstream Authors:
+
+    Thomas Tsou <tom@tsou.cc>
+    David A. Burgess <dburgess@kestrelsp.com>
+    Harvind S. Samra <hssamra@kestrelsp.com>
+    Raffi Sevlian <raffisev@gmail.com>
+
+Copyright:
+
+     Copyright (C) 2012-2013 Thomas Tsou <tom@tsou.cc>
+     Copyright (C) 2011 Range Networks, Inc.
+     Copyright (C) 2008-2011 Free Software Foundation, Inc.
+
+License:
+
+    GNU Affero General Public License, Version 3
+

debian/osmo-trx.install

@@ -0,0 +1 @@
+/usr/bin/osmo-trx

debian/rules

@@ -0,0 +1,12 @@
+#!/usr/bin/make -f
+
+DEB_BUILD_HARDENING=1
+
+%:
+	dh $@ --with autoreconf
+
+override_dh_shlibdeps:
+	dh_shlibdeps --dpkg-shlibdeps-params=--ignore-missing-info
+
+override_dh_strip:
+	dh_strip --dbg-package=osmo-trx-dbg

debian/source/format

@@ -0,0 +1 @@
+3.0 (native)

utils/clockdump.sh

@@ -0,0 +1,3 @@
+#!/bin/sh
+sudo tcpdump -i lo0 -A udp port 5700
+