Release v2.1.4

* AAR Media-Sub-Component modification for more UEs support

* Introduce parameter for legacy support for pre-release LTE 11 devices to do calling

IE (IPV4-local-addr field ) is not supported on
the LTE pre release-11 UEs. In order for the call
to work the local address in packet filter must
be replaced by any.

Parameter: no_ipv4v6_local_addr_in_packet_filter

.github/FUNDING.yml

@@ -0,0 +1,13 @@
+# These are supported funding model platforms
+
+#github: [acetcom, open5gs]
+github: acetcom
+#patreon: # Replace with a single Patreon username
+open_collective: open5gs
+#ko_fi: # Replace with a single Ko-fi username
+#tidelift: # Replace with a single Tidelift platform-name/package-name e.g., npm/babel
+#community_bridge: # Replace with a single Community Bridge project-name e.g., cloud-foundry
+#liberapay: # Replace with a single Liberapay username
+#issuehunt: # Replace with a single IssueHunt username
+#otechie: # Replace with a single Otechie username
+#custom: # Replace with up to 4 custom sponsorship URLs e.g., ['link1', 'link2']

.github/stale.yml

@@ -0,0 +1,61 @@
+# Configuration for probot-stale - https://github.com/probot/stale
+
+# Number of days of inactivity before an Issue or Pull Request becomes stale
+daysUntilStale: 180
+
+# Number of days of inactivity before an Issue or Pull Request with the stale label is closed.
+# Set to false to disable. If disabled, issues still need to be closed manually, but will remain marked as stale.
+daysUntilClose: 7
+
+# Only issues or pull requests with all of these labels are check if stale. Defaults to `[]` (disabled)
+onlyLabels: []
+
+# Issues or Pull Requests with these labels will never be considered stale. Set to `[]` to disable
+exemptLabels:
+  - pinned
+  - security
+  - "[Status] Maybe Later"
+
+# Set to true to ignore issues in a project (defaults to false)
+exemptProjects: false
+
+# Set to true to ignore issues in a milestone (defaults to false)
+exemptMilestones: false
+
+# Set to true to ignore issues with an assignee (defaults to false)
+exemptAssignees: false
+
+# Label to use when marking as stale
+staleLabel: wontfix
+
+# Comment to post when marking as stale. Set to `false` to disable
+markComment: >
+  This issue/PR has been automatically marked as stale because it has not had
+  recent activity for 180 days. It will be closed if no further activity
+  occurs in 7 dayss. Thank you for your contributions!
+
+# Comment to post when removing the stale label.
+# unmarkComment: >
+#   Your comment here.
+
+# Comment to post when closing a stale Issue or Pull Request.
+# closeComment: >
+#   Your comment here.
+
+# Limit the number of actions per hour, from 1-30. Default is 30
+limitPerRun: 30
+
+# Limit to only `issues` or `pulls`
+# only: issues
+
+# Optionally, specify configuration settings that are specific to just 'issues' or 'pulls':
+# pulls:
+#   daysUntilStale: 30
+#   markComment: >
+#     This pull request has been automatically marked as stale because it has not had
+#     recent activity. It will be closed if no further activity occurs. Thank you
+#     for your contributions.
+
+# issues:
+#   exemptLabels:
+#     - confirmed

.gitignore

@@ -1,59 +1,3 @@
-# compiler output
-*.o
-*.lo
-*.a
-*.la
-*.conf
-.deps
-.libs
-
-# generated files
-lib/freeDiameter-*/libfdcore/fdd.tab.[chy]
-lib/freeDiameter-*/libfdcore/lex.fdd.[cl]
-lib/freeDiameter-*/include/freeDiameter/version.h
-lib/freeDiameter-*/include/freeDiameter/config.h.in
-lib/freeDiameter-*/include/freeDiameter/freeDiameter-host.h
-lib/core/include/core.h
-support/systemd/nextepc-*.service
-support/logrotate/nextepc
-
-# autotools
-stamp-h1
-config.h
-config.in
-config.nice
-config.log
-configure
-aclocal.m4
-config.status
-libtool
-autom4te.cache
-build-aux
-Makefile
-Makefile.in
-m4
-
-# executables
-lib/core/test/testcore
-test/testepc
-nextepc-mmed
-nextepc-pcrfd
-nextepc-pgwd
-nextepc-sgwd
-nextepc-epcd
-nextepc-hssd
-
-# debian
-debian/*.debhelper.log
-debian/*.debhelper
-debian/*.substvars
-debian/tmp
-debian/files
-debian/autoreconf.before
-debian/autoreconf.after
-debian/nextepc-core
-debian/nextepc-mme
-debian/nextepc-sgw
-debian/nextepc-pgw
-debian/nextepc-pcrf
-debian/nextepc-hss
+# This directory is fetched during first build and is present in this directory
+subprojects/freeDiameter
+subprojects/usrsctp

Makefile.am

@@ -1,51 +0,0 @@
-## Process this file with automake to produce Makefile.in
-
-ACLOCAL_AMFLAGS = -I m4
-
-SUBDIRS = lib src support test
-
-bin_PROGRAMS = nextepc-mmed nextepc-hssd nextepc-sgwd nextepc-pgwd nextepc-pcrfd nextepc-epcd
-
-dist_nextepc_mmed_SOURCES = main.c
-nextepc_mmed_LDADD = $(top_srcdir)/src/libmme.la
-
-dist_nextepc_hssd_SOURCES = main.c
-nextepc_hssd_LDADD = $(top_srcdir)/src/libhss.la
-
-dist_nextepc_sgwd_SOURCES = main.c
-nextepc_sgwd_LDADD = $(top_srcdir)/src/libsgw.la
-
-dist_nextepc_pgwd_SOURCES = main.c
-nextepc_pgwd_LDADD = $(top_srcdir)/src/libpgw.la
-
-dist_nextepc_pcrfd_SOURCES = main.c
-nextepc_pcrfd_LDADD = $(top_srcdir)/src/libpcrf.la
-
-dist_nextepc_epcd_SOURCES = main.c
-nextepc_epcd_LDADD = $(top_srcdir)/src/libepc.la
-
-AM_CPPFLAGS = \
-    -I$(top_srcdir)/lib/core/include \
-    -I$(top_srcdir)/src/app \
-	$(NULL)
-
-install-data-hook:
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/log/nextepc
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/run/nextepc-mmed
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/run/nextepc-sgwd
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/run/nextepc-pgwd
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/run/nextepc-pcrfd
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/run/nextepc-hssd
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/run/nextepc-epcd
-
-CLEANFILES = -R data debian/test
-DISTCLEANFILES = $(DIST_ARCHIVES)
-MAINTAINERCLEANFILES = \
-    configure config.in \
-    aclocal.m4 m4/ltsugar.m4 m4/libtool.m4 m4/ltversion.m4 \
-    m4/lt~obsolete.m4 m4/ltoptions.m4 \
-    build-aux/ar-lib build-aux/config.guess build-aux/depcomp \
-	build-aux/ltmain.sh build-aux/test-driver build-aux/compile \
-	build-aux/config.sub build-aux/missing build-aux/install-sh \
-    Makefile.in
-MOSTLYCLEANFILES = core *.stackdump

README.md

@@ -1,183 +1,63 @@
-What's NextEPC
-================
+<h2 align="center">Supporting Open5GS</h2>
 
-NextEPC is a C-language Open Source implementation of the 3GPP Evolved Packet Core, i.e. the core network of an LTE network.
+If you find Open5GS useful for work, please consider supporting this Open Source project by [Becoming a sponsor](https://github.com/sponsors/acetcom). To manage the funding transactions transparently, you can donate through [OpenCollective](https://opencollective.com/open5gs).
 
-NextEPC provides the MME (Mobility Management Engine), which terminates the S1 interfaces from the eNodeBs cells in the cellular network, and interfaces via S11 to the SGW as well as via S6a to the HSS.
+<h3 align="center">Special Sponsor</h3>
+<table>
+  <tbody>
+    <tr>
+      <td align="center" valign="middle">
+  <a href="https://nextepc.com/" target="_blank">
+    <img width="260px" src="https://open5gs.org/assets/img/nextepc_logo.jpg">
+  </a>
+      </td>
+      <td align="center" valign="middle">
+  <a href="https://sdr.eee.strath.ac.uk/" target="_blank">
+    <img width="260px" src="https://open5gs.org/assets/img/strath.png">
+  </a>
+      </td>
+    </tr>
+  </tbody>
+</table>
 
-NextEPC provides the SGW (Serving Gateway) which is situated between the MME and PGW.  It implements the S11 interface to the MME, and the S5 interface to the PGW.
+<h3 align="center">Sponsors</h3>
+<table>
+  <tbody>
+    <tr>
+      <td align="center" valign="middle">
+        <a href="https://www.auctionsoftware.com/" target="_blank">
+          <img width="222px" src="https://open5gs.org/assets/img/asLogonew.png">
+        </a>
+      </td>
+      <td align="center" valign="middle">
+        <a href="https://www.wearetriple.com/" target="_blank">
+          <img width="222px" src="https://open5gs.org/assets/img/triple_logo.png">
+        </a>
+      </td>
+      <td align="center" valign="middle">
+        <a href="https://www.accessparks.com/" target="_blank">
+          <img width="222px" src="https://open5gs.org/assets/img/AccessParks.png">
+        </a>
+      </td>
+    </tr>
+  </tbody>
+</table>
 
-NextEPC provides the PGW or PDN-GW (Packet Data Network Gateway) element of the EPC, i.e. the gateway between the EPC and the external packet data network, such as the public Internet.  It implements the S5 interface towards the S-GW, the SGi interface towards the Internet, and the S7 interface towards the PCRF.
+## Documentation
 
-NextEPC provides the HSS (Home Subscriber Server) element of the EPC, i.e. the central database of mobile network subscribers, with their IMSI, MSISDN, cryptographic key materials, service subscription information, etc.  It implements the S6a interface towards the MME using the DIAMETER protocol.
+If you don't understand something about Open5GS, the [https://open5gs.org/open5gs/docs/](https://open5gs.org/open5gs/docs/) is a great place to look for answers.
 
-NextEPC contains the PCRF (Policy and Charging Rules Function), which controls the service quality (QoS) of individual connections and how to account/charge related traffic.  It implements the Gx interface towards the PGW using the DIAMETER protocol.
+## Community
 
-Installation 
-============
+- Problem with Open5GS can be filed as [issues](https://github.com/open5gs/open5gs/issues) in this repository.
+- Other topics related to this project are happening on the [discussions](https://github.com/open5gs/open5gs/discussions).
+- Voice and text chat are available in Open5GS's [Discord](https://discordapp.com/) workspace. Use [this link](https://discord.gg/GreNkuc) to get started.
 
-This post will guide you on how to get installed **NextEPC** with your environment. To date, NextEPC has been tested on GNU/Linux distributions(Debian, Ubuntu, CentOS, Fedora, OpenSUSE), FreeBSD, and Mac OS X.
+## Contributing
 
+If you're contributing through a pull request to Open5GS project on GitHub, please read the [Contributor License Agreement](https://open5gs.org/open5gs/cla/) in advance.
 
+## License
 
-## Ubuntu
-
-To get the latest Ubuntu version, please visit the official Ubuntu website: [https://www.ubuntu.com/download/](https://www.ubuntu.com/download/). 
-
-* ### Install with a Package Manager
-
-The Nextepc package is available on the recent versions of Ubuntu.
-
-```bash
-sudo add-apt-repository ppa:acetcom/nextepc
-sudo apt-get update
-sudo apt-get install nextepc
-```
-This will create a virtual network interface named as *pgwtun*. It is automatically removed by uninstalling NextEPC.
-
-```markdown
-ifconfig pgwtun
-pgwtun    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
-          inet addr:45.45.0.1  P-t-P:45.45.0.1  Mask:255.255.0.0
-          inet6 addr: fe80::50f6:182c:5aa3:16bb/64 Scope:Link
-          inet6 addr: cafe::1/64 Scope:Global
-          ...
-```
-
-
-
-* ### Uninstall NextEPC
-
-```bash
-sudo apt-get purge nextepc-core
-```
-
-You may need to remove manually /var/log/nextepc unless it is empty.
-```bash
-sudo rm -Rf /var/log/nextepc
-```
-
-
-## Debian, CentOS, Fedora, OpenSUSE, FreeBSD, and Mac OS X
-
-For these OS, you should build NextEPC from the code. First clone this [repository](https://github.com/acetcom/nextepc.git) and then follow instructions described in the [documentation](http://nextepc.org/docs/). 
-
-* ### [FreeBSD](http://nextepc.org/docs/build/1-freebsd)
-* ### [Mac OS X](http://nextepc.org/docs/build/2-macosx)
-* ### [CentOS](http://nextepc.org/docs/build/3-centos)
-* ### [Fedora](http://nextepc.org/docs/build/4-fedora)
-* ### [Ubuntu](http://nextepc.org/docs/build/5-ubuntu)
-
-Configuraiton 
-=============
-
-In LTE, there are tons of configurable parameters. This page will guide you to set essential parameters up. The configuration consists of two parts: IP network connectivity and LTE network settings.
-
-## 1. IP Connectivity between Network Entities
-
-The minimum requirement of having IP connectvity is to add a route for UE to have Internet connectivity.  
-
-By default, a LTE UE will receive a IP address with the network address of 45.45.0.0/16 or cafe::0/64. If you have a [NAT](https://en.wikipedia.org/wiki/Network_address_translation) router (e.g., wireless router, cable modem, etc), the LTE UE can reach Internet in uplink, but it cannot in downlink. It's because the NAT router has no idea on these IP addresses, so adding a route is required. Please refer to the user manual to know how to add a static route in your router.
-
-Add a route of both 45.45.0.0/16 and cafe::0/64 to go the PGW IP address. For example, a command for Linux will be:
-
-```bash
-sudo ip route add 45.45.0.0/16 via <PGW IP address>
-sudo ip route add cafe::0/64 via <PGW IP address>
-```
-
-## 2. LTE Network Settings
-
-By default, LTE PLMN and TAC are set as shown in the following:
-
-```yaml
-mme:
-    gummei: 
-      plmn_id:
-        mcc: 001
-        mnc: 01
-      mme_gid: 2
-      mme_code: 1
-    tai:
-      plmn_id:
-        mcc: 001
-        mnc: 01
-      tac: 12345
-```
-
-The LTE EnodeBs need to be set to use the same values of PLMN and TAC in NextEPC. If you want to change them, please modifiy in `/etc/nextepc/mme.conf`.
-
-
-After changing conf files, please restart NextEPC daemons.
-
-```bash
-systemctl restart nextepc-mmed
-```
-
-
-Web UI
-==================
-
-NextEPC has a number of configuration files corresponding to LTE network entities, which are in [YAML](http://yaml.org/) format. The LTE user subcription information of NextEPC is stored and maintained by [Mongo DB](https://www.mongodb.com/). Configuration files, located in `etc/nextepc/*.conf` can be easily modified using a general text editor such as [vi](http://www.vim.org/) or [emacs](https://www.gnu.org/s/emacs/), while managing the subscriber information requires a [Mongo DB client](https://docs.mongodb.com/ecosystem/tools/).
-
-NextEPC provides an alternative management interface for customers to manage their subscriber information in an easy way, that is **Web User Interface**. The following shows how to install the Web UI of NextEPC.
-
-## 1. Install Node.js and NPM
-
-To get the latest [Node.js](https://nodejs.org/) and [NPM](https://www.npmjs.com/), please visit the official Node.js website:
-[https://nodesjs.org/en/download/](https://nodesjs.org/en/download/).
-
-Or, you can install [Node.js](https://nodejs.org/) and [NPM](https://www.npmjs.com/) if you're using [Ubuntu](https://www.ubuntu.com):
-
-```bash
-sudo apt-get -y install curl gnupg
-curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
-sudo apt-get -y install nodejs
-```
-
-## 2. Obtain the source code
-
-```bash
-git clone https://github.com/acetcom/nextepc
-```
-
-## 3. Install the dependencies to build the code
-
-```bash
-cd nextepc/webui
-npm install
-```
-
-## 4. Build
-```bash
-npm run build
-```
-
-## 5. Running
-
-```bash
-npm run start
-```
-
-Now the web server is running on _http://localhost:3000_.
-
-## 6. Login with the default account
-
-Open _http://localhost:3000_. Login with **admin**.
-
-  * Username : admin
-  * Password : 1423
-
-Please change the password in _Account_ Menu.
-
-## 7. Register a subscriber
-
-Using Web UI, you can add a subscriber without a Mongo DB client. 
-
-  * Go to Subscriber Menu.
-  * Click `+` Button to add a new subscriber.
-  * Fill the IMSI, security context(K, OPc, AMF), and APN of the subscriber.
-  * Click `SAVE` Button
-
-This addition affects immediately NextEPC without restaring any daemon.
-
+- Open5GS Open Source files are made available under the terms of the GNU Affero General Public License ([GNU AGPL v3.0](https://www.gnu.org/licenses/agpl-3.0.html)).
+- [Commercial licenses](https://open5gs.org/open5gs/support/) are also available from [NextEPC, Inc.](https://nextepc.com)

acinclude.m4

@@ -1,108 +0,0 @@
-dnl
-dnl CORE_SUBST(varname)
-dnl
-dnl Adds variable with it's value into Makefile, e.g.:
-dnl CC = gcc
-dnl
-AC_DEFUN([CORE_SUBST],[
-  CORE_VAR_SUBST="$CORE_VAR_SUBST $1"
-])
-
-dnl
-dnl CORE_SUBST_OLD(varname)
-dnl
-dnl Same as CORE_SUBST() but also substitutes all @VARNAME@
-dnl instances in every file passed to AC_OUTPUT()
-dnl
-AC_DEFUN([CORE_SUBST_OLD],[
-  CORE_SUBST($1)
-  AC_SUBST($1)
-])
-
-dnl
-dnl CORE_CONFIG_NICE(filename)
-dnl
-dnl Generates the config.nice file
-dnl
-AC_DEFUN([CORE_CONFIG_NICE],[
-  AC_REQUIRE([AC_PROG_EGREP])
-  AC_REQUIRE([LT_AC_PROG_SED])
-  CORE_SUBST_OLD(EGREP)
-  CORE_SUBST_OLD(SED)
-  test -f $1 && mv $1 $1.old
-  rm -f $1.old
-  cat >$1<<EOF
-#! /bin/sh
-#
-# Created by configure
-
-EOF
-
-  for var in CFLAGS CXXFLAGS CPPFLAGS LDFLAGS EXTRA_LDFLAGS_PROGRAM LIBS CC CXX; do
-    eval val=\$$var
-    if test -n "$val"; then
-      echo "$var='$val' \\" >> $1
-    fi
-  done
-
-  echo "'[$]0' \\" >> $1
-  if test `expr -- [$]0 : "'.*"` = 0; then
-    CONFIGURE_COMMAND="$CONFIGURE_COMMAND '[$]0'"
-  else 
-    CONFIGURE_COMMAND="$CONFIGURE_COMMAND [$]0"
-  fi
-  for arg in $ac_configure_args; do
-     if test `expr -- $arg : "'.*"` = 0; then
-        if test `expr -- $arg : "--.*"` = 0; then
-       	  break;
-        fi
-        echo "'[$]arg' \\" >> $1
-        CONFIGURE_OPTIONS="$CONFIGURE_OPTIONS '[$]arg'"
-     else
-        if test `expr -- $arg : "'--.*"` = 0; then
-       	  break;
-        fi
-        echo "[$]arg \\" >> $1
-        CONFIGURE_OPTIONS="$CONFIGURE_OPTIONS [$]arg"
-     fi
-  done
-  echo '"[$]@"' >> $1
-  chmod +x $1
-  CONFIGURE_COMMAND="$CONFIGURE_COMMAND $CONFIGURE_OPTIONS"
-  CORE_SUBST_OLD(CONFIGURE_COMMAND)
-  CORE_SUBST_OLD(CONFIGURE_OPTIONS)
-])
-
-AC_DEFUN([AX_CHECK_COMPILE_FLAG],
-[AC_PREREQ(2.59)dnl for _AC_LANG_PREFIX
-AS_VAR_PUSHDEF([CACHEVAR],[ax_cv_check_[]_AC_LANG_ABBREV[]flags_$4_$1])dnl
-AC_CACHE_CHECK([whether _AC_LANG compiler accepts $1], CACHEVAR, [
-  ax_check_save_flags=$[]_AC_LANG_PREFIX[]FLAGS
-  _AC_LANG_PREFIX[]FLAGS="$[]_AC_LANG_PREFIX[]FLAGS $4 $1"
-  AC_COMPILE_IFELSE([m4_default([$5],[AC_LANG_PROGRAM()])],
-    [AS_VAR_SET(CACHEVAR,[yes])],
-    [AS_VAR_SET(CACHEVAR,[no])])
-  _AC_LANG_PREFIX[]FLAGS=$ax_check_save_flags])
-AS_IF([test x"AS_VAR_GET(CACHEVAR)" = xyes],
-  [m4_default([$2], :)],
-  [m4_default([$3], :)])
-AS_VAR_POPDEF([CACHEVAR])dnl
-])dnl AX_CHECK_COMPILE_FLAGS
-
-# adl_RECURSIVE_EVAL(VALUE, RESULT)
-# =================================
-# Interpolate the VALUE in loop until it doesn't change,
-# and set the result to $RESULT.
-# WARNING: It's easy to get an infinite loop with some unsane input.
-# For example ${datadir} becomes ${datarootdir}, and then ${prefix}/share, and
-# finally ${prefix} is replaced by the prefix.
-AC_DEFUN([adl_RECURSIVE_EVAL],
-[_lcl_receval="$1"
-$2=`(test "x$prefix" = xNONE && prefix="$ac_default_prefix"
-     test "x$exec_prefix" = xNONE && exec_prefix="${prefix}"
-     _lcl_receval_old=''
-     while test "[$]_lcl_receval_old" != "[$]_lcl_receval"; do
-       _lcl_receval_old="[$]_lcl_receval"
-       eval _lcl_receval="\"[$]_lcl_receval\""
-     done
-     echo "[$]_lcl_receval")`])

configs/310014.yaml.in

@@ -0,0 +1,206 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 310
+        mnc: 014
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 310
+        mnc: 014
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    pfcp:
+      - addr: 127.0.0.4
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 310
+          mnc: 014
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 310
+          mnc: 014
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 310
+          mnc: 014
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    gtpu:
+      - addr: 127.0.0.6
+    pfcp:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/csfb.yaml.in

@@ -0,0 +1,240 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    sgsap:
+      - addr: 127.0.0.2
+        map:
+          tai:
+            plmn_id:
+              mcc: 901
+              mnc: 70
+            tac: 7
+          lai:
+            plmn_id:
+              mcc: 901
+              mnc: 70
+            lac: 2342
+        map:
+          tai:
+            plmn_id:
+              mcc: 724
+              mnc: 21
+            tac: 12345
+          lai:
+            plmn_id:
+              mcc: 724
+              mnc: 21
+            lac: 51544
+    gummei:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        mme_gid: 2
+        mme_code: 1
+      - plmn_id:
+          mcc: 724
+          mnc: 21
+        mme_gid: 2
+        mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 7
+    tai:
+      plmn_id:
+        mcc: 724
+        mnc: 21
+      tac: 12345
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    pfcp:
+      - addr: 127.0.0.4
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    gtpu:
+      - addr: 127.0.0.6
+    pfcp:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+#nrf:
+#    sbi:
+#      - addr:
+#        - 127.0.0.10
+#        - ::1
+#        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/freeDiameter/cacert.pem

@@ -0,0 +1,17 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

configs/freeDiameter/hss.cert.pem

@@ -0,0 +1,60 @@
+Certificate:
+    Data:
+        Version: 3 (0x2)
+        Serial Number: 2 (0x2)
+        Signature Algorithm: sha256WithRSAEncryption
+        Issuer: CN=ca.localdomain, C=KO, ST=Seoul, L=Nowon, O=Open5GS, OU=Tests
+        Validity
+            Not Before: Aug 22 00:39:17 2020 GMT
+            Not After : Aug 20 00:39:17 2030 GMT
+        Subject: C=KO, ST=Seoul, O=Open5GS, OU=Tests, CN=hss.localdomain
+        Subject Public Key Info:
+            Public Key Algorithm: rsaEncryption
+                RSA Public-Key: (1024 bit)
+                Modulus:
+                    00:e8:b3:82:96:bd:4a:f6:30:2c:03:60:aa:82:65:
+                    b0:15:32:5f:d3:90:0d:c0:1d:06:62:52:51:c7:12:
+                    36:d7:5c:34:21:ac:4a:44:4d:9b:a5:22:9c:3e:86:
+                    a8:ba:df:02:64:b6:74:f5:95:c4:71:e8:e0:28:1d:
+                    2b:ea:06:94:fa:3c:f1:07:d3:23:55:b6:84:d4:00:
+                    f4:28:08:18:be:c7:38:e1:b7:d9:b4:bf:d3:e1:d3:
+                    d8:13:60:72:e1:e4:d3:31:37:b1:cf:b9:e1:c9:8d:
+                    5e:e2:1c:54:a3:90:b1:69:6f:07:90:ff:68:86:69:
+                    7d:ef:50:69:0d:9d:47:18:39
+                Exponent: 65537 (0x10001)
+        X509v3 extensions:
+            X509v3 Basic Constraints: 
+                CA:FALSE
+            Netscape Comment: 
+                OpenSSL Generated Certificate
+            X509v3 Subject Key Identifier: 
+                74:20:F9:E9:BD:E1:37:8A:9C:A9:AD:B4:B2:28:7D:44:22:0B:BD:0B
+            X509v3 Authority Key Identifier: 
+                keyid:64:FB:C8:D7:A3:20:17:DC:A8:3A:AA:4B:2B:85:CD:BD:3E:53:4B:09
+
+    Signature Algorithm: sha256WithRSAEncryption
+         ac:aa:85:5a:57:61:6d:7d:f3:c4:2a:b7:73:3f:e9:bc:b9:6d:
+         0a:8f:35:24:13:66:46:14:5e:60:90:3e:32:95:72:5a:21:55:
+         15:fe:ef:30:44:fb:fe:3e:cb:bf:f3:30:ce:3b:bb:4f:c1:64:
+         41:ea:db:99:f2:ca:db:78:03:95:81:91:3c:fa:1d:9c:8a:55:
+         eb:9d:6a:c1:b6:de:44:38:0f:99:b4:66:d5:4e:dd:e7:d5:ba:
+         ff:f2:4b:f6:9a:94:53:55:36:4e:73:2d:da:d1:bb:0f:8f:fb:
+         1a:22:43:28:6a:b4:5d:a3:40:2c:cf:7e:0d:3e:fb:60:ef:92:
+         f3:0e
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

configs/freeDiameter/hss.conf.in

@@ -0,0 +1,265 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included file(s) 
+# where the "include" keyword is found.
+
+
+##############################################################
+##  Peer identity and realm 
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "hss.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+##  Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+#Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections (TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+#SecPort = 5868;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed 
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the 
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections. 
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+##  Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "127.0.0.8";
+
+
+##############################################################
+##  Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+##  TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
+TLS_Cred = "@sysconfdir@/freeDiameter/hss.cert.pem", "@sysconfdir@/freeDiameter/hss.key.pem";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+TLS_CA = "@sysconfdir@/freeDiameter/cacert.pem";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have been verified before. 
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges 
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+#   http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function, 
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start 
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+##  Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+##  Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing 
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA 
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+##  Extensions configuration
+
+#  The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+#  These extensions may in addition receive the name of a 
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_*  for extensions useful only to retrieve more information on the framework execution.
+# acl_*  : Access control list, to control which peers are allowed to connect.
+# rt_*   : routing extensions that impact how messages are forwarded to other peers.
+# app_*  : applications, these extensions usually register callbacks to handle specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter displays some
+# information about some events. This extension does not actually use a configuration file
+# but receives directly a parameter in the string passed to the extension. Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information about sent and received messages.
+# The four digits respectively control: connections, routing decisions, sent/received messages, errors.
+# The values for each digit are:
+#  0 - default - keep the default behavior
+#  1 - quiet   - remove any specific log
+#  2 - compact - display only a summary of the information
+#  4 - full    - display the complete information on a single long line
+#  8 - tree    - display the complete information in an easier to read format spanning several lines.
+
+LoadExtension = "@libdir@/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "@libdir@/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca_3gpp.fdx";
+
+
+##############################################################
+##  Peers configuration
+
+#  The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this behavior (e.g., acl_wl).
+# 
+#  In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some 
+# Diameter nodes and allow connections from these nodes.
+#  This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+#  No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+#  No_TLS;       # assume transparent security instead of TLS. DTLS is not supported yet (will change in future versions).
+#  Port = 5868;  # The port to connect to
+#  TcTimer = 30;
+#  TwTimer = 30;
+#  ConnectTo = "202.249.37.5";
+#  ConnectTo = "2001:200:903:2::202:1";
+#  TLS_Prio = "NORMAL";
+#  Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
+ConnectPeer = "mme.localdomain" { ConnectTo = "127.0.0.2"; No_TLS; };
+
+##############################################################

configs/freeDiameter/hss.key.pem

@@ -0,0 +1,15 @@
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----

configs/freeDiameter/meson.build

@@ -0,0 +1,57 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+freediameter_sysconfdir = join_paths(sysconfdir, 'freeDiameter')
+meson.add_install_script(python3_exe, '-c',
+        mkdir_p.format(freediameter_sysconfdir))
+
+freediameter_conf = '''
+    mme.conf
+    hss.conf
+    smf.conf
+    pcrf.conf
+'''.split()
+
+foreach file : freediameter_conf
+    gen = configure_file(
+            input : file + '.in',
+            output : file,
+            configuration : conf_data)
+    meson.add_install_script(python3_exe, '-c',
+            install_conf.format(gen, freediameter_sysconfdir))
+endforeach
+
+freediameter_pem = '''
+    cacert.pem
+    mme.cert.pem
+    mme.key.pem
+    hss.cert.pem
+    hss.key.pem
+    smf.cert.pem
+    smf.key.pem
+    pcrf.cert.pem
+    pcrf.key.pem
+'''.split()
+
+foreach file : freediameter_pem
+    gen = configure_file(
+            input : file,
+            output : file,
+            configuration : conf_data)
+    meson.add_install_script(python3_exe, '-c',
+            install_conf.format(gen, freediameter_sysconfdir))
+endforeach

configs/freeDiameter/mme.cert.pem

@@ -0,0 +1,60 @@
+Certificate:
+    Data:
+        Version: 3 (0x2)
+        Serial Number: 1 (0x1)
+        Signature Algorithm: sha256WithRSAEncryption
+        Issuer: CN=ca.localdomain, C=KO, ST=Seoul, L=Nowon, O=Open5GS, OU=Tests
+        Validity
+            Not Before: Aug 22 00:39:17 2020 GMT
+            Not After : Aug 20 00:39:17 2030 GMT
+        Subject: C=KO, ST=Seoul, O=Open5GS, OU=Tests, CN=mme.localdomain
+        Subject Public Key Info:
+            Public Key Algorithm: rsaEncryption
+                RSA Public-Key: (1024 bit)
+                Modulus:
+                    00:9c:69:25:fc:ee:7f:11:e0:81:f7:b5:51:8f:01:
+                    b8:9e:01:74:03:3e:a5:25:de:6f:28:66:05:6f:7b:
+                    ab:86:0f:09:fc:94:7b:e8:aa:9f:0b:5f:32:27:46:
+                    f0:ca:e2:12:f3:5d:03:80:e9:9a:1d:f0:20:d6:5c:
+                    1b:4b:65:d4:66:e3:b7:63:19:6e:b1:e8:db:6c:24:
+                    df:24:2c:50:f2:1c:8a:33:c1:f7:27:b8:3c:6e:c6:
+                    90:98:ac:43:67:00:6b:3d:ab:39:49:3d:d5:74:77:
+                    6a:0e:38:4e:41:cd:e4:15:63:27:76:b5:9c:75:f8:
+                    cb:6f:cc:5e:f3:a7:68:ef:a5
+                Exponent: 65537 (0x10001)
+        X509v3 extensions:
+            X509v3 Basic Constraints: 
+                CA:FALSE
+            Netscape Comment: 
+                OpenSSL Generated Certificate
+            X509v3 Subject Key Identifier: 
+                92:69:1E:3F:9F:E2:40:2F:81:24:05:B4:13:AA:8A:65:5C:7C:71:1D
+            X509v3 Authority Key Identifier: 
+                keyid:64:FB:C8:D7:A3:20:17:DC:A8:3A:AA:4B:2B:85:CD:BD:3E:53:4B:09
+
+    Signature Algorithm: sha256WithRSAEncryption
+         74:fc:32:ee:e6:2b:a5:f5:a4:71:64:49:ff:eb:6f:01:30:32:
+         b7:61:62:97:e1:2c:0f:50:62:a8:71:9a:bd:8b:d8:0d:4b:28:
+         ea:b4:5f:1c:30:3e:4c:23:2f:c5:5b:77:ed:48:c2:bb:b7:0c:
+         d9:50:4d:7f:7f:a3:b9:1e:2c:19:33:1e:41:94:e1:14:1b:45:
+         e8:ae:27:aa:5e:78:8e:67:67:19:69:48:e3:e4:c0:c3:a7:85:
+         fd:fd:d6:62:6e:dd:1f:31:2f:bc:9a:d2:fa:82:eb:4b:3e:35:
+         e0:90:db:ed:de:1a:68:33:6f:e6:90:9f:08:64:60:46:91:09:
+         74:15
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

configs/freeDiameter/mme.conf.in

@@ -0,0 +1,266 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included file(s) 
+# where the "include" keyword is found.
+
+
+##############################################################
+##  Peer identity and realm 
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "mme.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+##  Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+#Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections (TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+#SecPort = 5868;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed 
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the 
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections. 
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+##  Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "127.0.0.2";
+
+
+##############################################################
+##  Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+##  TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
+TLS_Cred = "@sysconfdir@/freeDiameter/mme.cert.pem", "@sysconfdir@/freeDiameter/mme.key.pem";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+TLS_CA = "@sysconfdir@/freeDiameter/cacert.pem";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have been verified before. 
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges 
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+#   http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function, 
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start 
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+##  Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+##  Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing 
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA 
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+##  Extensions configuration
+
+#  The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+#  These extensions may in addition receive the name of a 
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_*  for extensions useful only to retrieve more information on the framework execution.
+# acl_*  : Access control list, to control which peers are allowed to connect.
+# rt_*   : routing extensions that impact how messages are forwarded to other peers.
+# app_*  : applications, these extensions usually register callbacks to handle specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter displays some
+# information about some events. This extension does not actually use a configuration file
+# but receives directly a parameter in the string passed to the extension. Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information about sent and received messages.
+# The four digits respectively control: connections, routing decisions, sent/received messages, errors.
+# The values for each digit are:
+#  0 - default - keep the default behavior
+#  1 - quiet   - remove any specific log
+#  2 - compact - display only a summary of the information
+#  4 - full    - display the complete information on a single long line
+#  8 - tree    - display the complete information in an easier to read format spanning several lines.
+
+LoadExtension = "@libdir@/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "@libdir@/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca_3gpp.fdx";
+
+
+##############################################################
+##  Peers configuration
+
+#  The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this behavior (e.g., acl_wl).
+# 
+#  In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some 
+# Diameter nodes and allow connections from these nodes.
+#  This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+#  No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+#  No_TLS;       # assume transparent security instead of TLS. DTLS is not supported yet (will change in future versions).
+#  Port = 5868;  # The port to connect to
+#  TcTimer = 30;
+#  TwTimer = 30;
+#  ConnectTo = "202.249.37.5";
+#  ConnectTo = "2001:200:903:2::202:1";
+#  TLS_Prio = "NORMAL";
+#  Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
+ConnectPeer = "hss.localdomain" { ConnectTo = "127.0.0.8"; No_TLS; };
+
+
+##############################################################

configs/freeDiameter/mme.key.pem

@@ -0,0 +1,15 @@
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----

configs/freeDiameter/pcrf.cert.pem

@@ -0,0 +1,60 @@
+Certificate:
+    Data:
+        Version: 3 (0x2)
+        Serial Number: 4 (0x4)
+        Signature Algorithm: sha256WithRSAEncryption
+        Issuer: CN=ca.localdomain, C=KO, ST=Seoul, L=Nowon, O=Open5GS, OU=Tests
+        Validity
+            Not Before: Aug 22 00:39:17 2020 GMT
+            Not After : Aug 20 00:39:17 2030 GMT
+        Subject: C=KO, ST=Seoul, O=Open5GS, OU=Tests, CN=pcrf.localdomain
+        Subject Public Key Info:
+            Public Key Algorithm: rsaEncryption
+                RSA Public-Key: (1024 bit)
+                Modulus:
+                    00:b9:1f:b3:a5:74:de:31:97:ac:fa:86:1d:65:86:
+                    c7:be:b1:25:07:01:f3:69:21:7a:6d:ec:d7:c8:ec:
+                    e2:c9:e8:71:a1:07:ce:0e:68:e5:0f:a9:ec:f3:5e:
+                    5e:3e:a4:ea:27:f3:fa:65:36:2d:7c:ce:a8:70:cc:
+                    34:db:51:b2:28:7b:03:bf:78:06:61:7c:44:81:17:
+                    88:f9:c9:16:cb:2e:9f:21:4a:24:28:0a:0f:76:ef:
+                    63:0f:05:a4:ee:52:64:1f:4f:0b:ec:4e:6c:1b:12:
+                    40:43:75:ed:62:16:ec:6a:ba:15:dd:c4:b9:fa:a9:
+                    de:2c:80:f5:84:c5:97:ec:7b
+                Exponent: 65537 (0x10001)
+        X509v3 extensions:
+            X509v3 Basic Constraints: 
+                CA:FALSE
+            Netscape Comment: 
+                OpenSSL Generated Certificate
+            X509v3 Subject Key Identifier: 
+                CD:C4:C9:C1:7F:D9:34:1F:DB:08:61:27:FC:59:A2:C2:CC:19:9A:7B
+            X509v3 Authority Key Identifier: 
+                keyid:64:FB:C8:D7:A3:20:17:DC:A8:3A:AA:4B:2B:85:CD:BD:3E:53:4B:09
+
+    Signature Algorithm: sha256WithRSAEncryption
+         24:3a:da:a7:50:b3:42:ab:e9:87:21:b2:d9:2b:a1:44:0b:5f:
+         bd:ad:c9:8b:b1:ca:d5:2e:65:46:55:80:11:00:33:03:f9:04:
+         b1:31:a2:c9:d2:41:e0:ec:73:bc:9a:3c:31:06:cc:d0:2d:73:
+         1f:b4:93:1c:b0:99:dd:14:27:64:39:7e:c5:ab:53:48:c5:25:
+         e8:88:fd:4e:b8:dd:64:88:b5:b4:89:8b:15:97:8b:e7:c9:fb:
+         23:6c:ed:60:9b:2f:f0:99:7a:75:6c:8e:ea:09:c6:ba:ff:e9:
+         81:3f:97:96:8b:00:58:5b:88:13:e8:8a:39:4c:f6:c9:06:d3:
+         24:66
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

configs/freeDiameter/pcrf.conf.in

@@ -0,0 +1,265 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included file(s) 
+# where the "include" keyword is found.
+
+
+##############################################################
+##  Peer identity and realm 
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "pcrf.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+##  Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+#Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections (TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+#SecPort = 5868;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed 
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the 
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections. 
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+##  Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "127.0.0.9";
+
+
+##############################################################
+##  Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+##  TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
+TLS_Cred = "@sysconfdir@/freeDiameter/pcrf.cert.pem", "@sysconfdir@/freeDiameter/pcrf.key.pem";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+TLS_CA = "@sysconfdir@/freeDiameter/cacert.pem";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have been verified before. 
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges 
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+#   http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function, 
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start 
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+##  Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+##  Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing 
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA 
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+##  Extensions configuration
+
+#  The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+#  These extensions may in addition receive the name of a 
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_*  for extensions useful only to retrieve more information on the framework execution.
+# acl_*  : Access control list, to control which peers are allowed to connect.
+# rt_*   : routing extensions that impact how messages are forwarded to other peers.
+# app_*  : applications, these extensions usually register callbacks to handle specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter displays some
+# information about some events. This extension does not actually use a configuration file
+# but receives directly a parameter in the string passed to the extension. Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information about sent and received messages.
+# The four digits respectively control: connections, routing decisions, sent/received messages, errors.
+# The values for each digit are:
+#  0 - default - keep the default behavior
+#  1 - quiet   - remove any specific log
+#  2 - compact - display only a summary of the information
+#  4 - full    - display the complete information on a single long line
+#  8 - tree    - display the complete information in an easier to read format spanning several lines.
+
+LoadExtension = "@libdir@/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "@libdir@/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca_3gpp.fdx";
+
+
+##############################################################
+##  Peers configuration
+
+#  The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this behavior (e.g., acl_wl).
+# 
+#  In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some 
+# Diameter nodes and allow connections from these nodes.
+#  This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+#  No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+#  No_TLS;       # assume transparent security instead of TLS. DTLS is not supported yet (will change in future versions).
+#  Port = 5868;  # The port to connect to
+#  TcTimer = 30;
+#  TwTimer = 30;
+#  ConnectTo = "202.249.37.5";
+#  ConnectTo = "2001:200:903:2::202:1";
+#  TLS_Prio = "NORMAL";
+#  Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
+ConnectPeer = "smf.localdomain" { ConnectTo = "127.0.0.4"; No_TLS; };
+
+##############################################################

configs/freeDiameter/pcrf.key.pem

@@ -0,0 +1,15 @@
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----

configs/freeDiameter/smf.cert.pem

@@ -0,0 +1,60 @@
+Certificate:
+    Data:
+        Version: 3 (0x2)
+        Serial Number: 3 (0x3)
+        Signature Algorithm: sha256WithRSAEncryption
+        Issuer: CN=ca.localdomain, C=KO, ST=Seoul, L=Nowon, O=Open5GS, OU=Tests
+        Validity
+            Not Before: Aug 22 00:39:17 2020 GMT
+            Not After : Aug 20 00:39:17 2030 GMT
+        Subject: C=KO, ST=Seoul, O=Open5GS, OU=Tests, CN=smf.localdomain
+        Subject Public Key Info:
+            Public Key Algorithm: rsaEncryption
+                RSA Public-Key: (1024 bit)
+                Modulus:
+                    00:ad:d6:cb:88:33:51:23:72:f1:16:29:2a:df:b7:
+                    75:d7:38:9e:da:18:b6:27:73:a8:60:ec:04:8f:d0:
+                    cd:c6:2e:10:ff:bd:c3:c2:a3:d7:53:e7:9e:73:07:
+                    07:a9:59:16:b1:7f:92:79:4d:d8:ee:5a:c7:ed:ef:
+                    37:83:8a:7d:94:08:41:0b:34:68:27:a5:4b:7d:cb:
+                    29:fb:85:c0:21:6e:17:72:32:29:7a:28:be:94:31:
+                    56:d2:85:9f:4b:b1:33:6f:f9:eb:01:9c:e7:2f:68:
+                    94:6b:91:58:a7:80:04:94:3c:b3:19:96:91:31:f7:
+                    c4:81:98:2b:85:8f:5c:f0:fd
+                Exponent: 65537 (0x10001)
+        X509v3 extensions:
+            X509v3 Basic Constraints: 
+                CA:FALSE
+            Netscape Comment: 
+                OpenSSL Generated Certificate
+            X509v3 Subject Key Identifier: 
+                91:4B:EF:65:02:0D:C8:85:FA:4A:3F:29:C0:10:3C:1B:AE:E4:AD:A4
+            X509v3 Authority Key Identifier: 
+                keyid:64:FB:C8:D7:A3:20:17:DC:A8:3A:AA:4B:2B:85:CD:BD:3E:53:4B:09
+
+    Signature Algorithm: sha256WithRSAEncryption
+         a3:6e:4f:00:bd:1a:62:b9:86:0f:35:f6:18:8d:15:61:a2:bc:
+         05:07:f1:73:8d:70:6f:e1:34:f1:ae:87:26:87:13:0b:c8:d8:
+         29:16:70:02:12:73:36:f9:de:43:26:12:7d:9f:d2:20:7c:e2:
+         76:47:0b:14:ba:67:e5:5a:0d:22:3b:00:c8:35:ab:dd:b1:9a:
+         e5:75:b0:86:89:02:15:32:b3:e9:48:c3:e0:38:e1:56:4c:fd:
+         aa:12:96:00:6d:a6:c3:ab:b0:8c:4b:ab:b2:4c:c2:08:26:ab:
+         d6:3f:26:95:4a:da:b8:dd:9a:f8:fe:b9:c2:e3:7a:a3:2f:2c:
+         7f:df
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

configs/freeDiameter/smf.conf.in

@@ -0,0 +1,266 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included file(s) 
+# where the "include" keyword is found.
+
+
+##############################################################
+##  Peer identity and realm 
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "smf.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+##  Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+#Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections (TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+#SecPort = 5868;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed 
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the 
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections. 
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+##  Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "127.0.0.4";
+
+
+##############################################################
+##  Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+##  TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
+TLS_Cred = "@sysconfdir@/freeDiameter/smf.cert.pem", "@sysconfdir@/freeDiameter/smf.key.pem";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+TLS_CA = "@sysconfdir@/freeDiameter/cacert.pem";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have been verified before. 
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges 
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+#   http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function, 
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start 
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+##  Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+##  Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing 
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA 
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+##  Extensions configuration
+
+#  The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+#  These extensions may in addition receive the name of a 
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_*  for extensions useful only to retrieve more information on the framework execution.
+# acl_*  : Access control list, to control which peers are allowed to connect.
+# rt_*   : routing extensions that impact how messages are forwarded to other peers.
+# app_*  : applications, these extensions usually register callbacks to handle specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter displays some
+# information about some events. This extension does not actually use a configuration file
+# but receives directly a parameter in the string passed to the extension. Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information about sent and received messages.
+# The four digits respectively control: connections, routing decisions, sent/received messages, errors.
+# The values for each digit are:
+#  0 - default - keep the default behavior
+#  1 - quiet   - remove any specific log
+#  2 - compact - display only a summary of the information
+#  4 - full    - display the complete information on a single long line
+#  8 - tree    - display the complete information in an easier to read format spanning several lines.
+
+LoadExtension = "@libdir@/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "@libdir@/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca_3gpp.fdx";
+
+
+##############################################################
+##  Peers configuration
+
+#  The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this behavior (e.g., acl_wl).
+# 
+#  In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some 
+# Diameter nodes and allow connections from these nodes.
+#  This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+#  No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+#  No_TLS;       # assume transparent security instead of TLS. DTLS is not supported yet (will change in future versions).
+#  Port = 5868;  # The port to connect to
+#  TcTimer = 30;
+#  TwTimer = 30;
+#  ConnectTo = "202.249.37.5";
+#  ConnectTo = "2001:200:903:2::202:1";
+#  TLS_Prio = "NORMAL";
+#  Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
+ConnectPeer = "pcrf.localdomain" { ConnectTo = "127.0.0.9"; No_TLS; };
+
+
+##############################################################

configs/freeDiameter/smf.key.pem

@@ -0,0 +1,15 @@
+-----BEGIN RSA PRIVATE KEY-----
+MIICXAIBAAKBgQCt1suIM1EjcvEWKSrft3XXOJ7aGLYnc6hg7ASP0M3GLhD/vcPC
+o9dT555zBwepWRaxf5J5TdjuWsft7zeDin2UCEELNGgnpUt9yyn7hcAhbhdyMil6
+KL6UMVbShZ9LsTNv+esBnOcvaJRrkVingASUPLMZlpEx98SBmCuFj1zw/QIDAQAB
+AoGAV1x1hmn7oav22mMv56PD9be/pOz8RZFLEgIqPLf7YVfvNQaBpYQ/ByyEJVxo
+DkP2Mpdg3dMwbIB0ru8j39guSO0evsCG95u5L3lUMLFh/+WTt4W0g4+9y0qD1dUy
+y7kk+gKLlbPvyRNr+CiEnpz/rxdWC3J+tVBsWJGNjBGtZWECQQDdn5q7FUrF6HHQ
+O5iJYCbeL+Xn4Ajwrr4M9OeGhMz4pTTtE45jjGi2ykFa9TJFMqjLuClBXw5FkIOe
+S4unTO7JAkEAyM268Z558xHHnRl6uEN1NrqqpdXtZYnK9lm4/kZRs2mKm/98fjf0
+GiHwiKqONP7si4ARE2Ws1wKmXmCe0nNGlQJBAMw8KFCd95FYe4IlWZXHySnaxCki
+WbrLnhK8opxhx66gOJz996sfmuRQkVfsPE5uuAU9Cq/WlIVg/xoijmk3yZkCQEFu
+YCsZM62TrpKvWcCvIoOZ4b817Sw38S3C4LfiW/71NhhM8NkEDINzabhusvXr11JB
+gc7rQ52wHFwGadoze90CQF9qOBatpIFlEDkhzKofRILCWIzSrfhFdcCZqe6K8G10
+ngbk3Xg3I0I+qWViDivOm689SC9xniF7wJ1XH0BRBKE=
+-----END RSA PRIVATE KEY-----

configs/logrotate/meson.build

@@ -0,0 +1,19 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+file = 'open5gs'
+configure_file(input : file + '.in', output : file, configuration : conf_data)

configs/logrotate/open5gs.in

@@ -0,0 +1,14 @@
+@localstatedir@/log/open5gs/*.log {
+    daily
+    sharedscripts
+    missingok
+    compress
+    rotate 14
+    create 640 open5gs open5gs
+
+    postrotate
+        for i in nrfd pcrfd hssd ausfd udmd udrd upfd sgwcd sgwud smfd mmed amfd; do
+            systemctl reload open5gs-$i
+        done
+    endscript
+}

configs/meson.build

@@ -0,0 +1,58 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+conf_data = configuration_data()
+
+conf_data.set('bindir', bindir)
+conf_data.set('sysconfdir', sysconfdir)
+conf_data.set('libdir', libdir)
+conf_data.set('localstatedir', localstatedir)
+
+freediameter_extensions_builddir = join_paths(
+        meson.build_root(), 'subprojects', 'freeDiameter', 'extensions')
+conf_data.set('freediameter_extensions_builddir',
+        freediameter_extensions_builddir)
+
+if host_system == 'linux'
+    conf_data.set('loopback_devname', 'lo')
+else
+    conf_data.set('loopback_devname', 'lo0')
+endif
+
+example_conf = '''
+    sample.yaml
+    310014.yaml
+    csfb.yaml
+    volte.yaml
+    vonr.yaml
+    minimal.yaml
+    srslte.yaml
+    sample.yaml
+'''.split()
+
+foreach file : example_conf
+    gen = configure_file(
+            input : file + '.in',
+            output : file,
+            configuration : conf_data)
+endforeach
+
+subdir('open5gs')
+subdir('freeDiameter')
+subdir('systemd')
+subdir('logrotate')
+subdir('newsyslog')

configs/minimal.yaml.in

@@ -0,0 +1,209 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    pfcp:
+      - addr: 127.0.0.4
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 208
+          mnc: 93
+        amf_id:
+          region: 202
+          set: 1016
+    tai:
+      - plmn_id:
+          mcc: 208
+          mnc: 93
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 208
+          mnc: 93
+        s_nssai:
+          - sst: 1
+            sd: 010203
+          - sst: 1
+            sd: 112233
+    security:
+        integrity_order : [ NIA2, NIA1 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    gtpu:
+      - addr: 127.0.0.6
+    pfcp:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/newsyslog/meson.build

@@ -0,0 +1,19 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+file = 'open5gs.conf'
+configure_file(input : file + '.in', output : file, configuration : conf_data)

configs/newsyslog/open5gs.conf.in

@@ -0,0 +1,15 @@
+# truncate rails logs every day at midnight, keep 14 previous logs, compress previous logs
+#
+# logfilename                         [owner:group] mode count size  when  flags [/pid_file]        [sig_num]
+@localstatedir@/log/open5gs/nrf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-nrfd/pid`
+@localstatedir@/log/open5gs/pcrf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-pcrfd/pid`
+@localstatedir@/log/open5gs/hss.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-hssd/pid`
+@localstatedir@/log/open5gs/ausf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-ausfd/pid`
+@localstatedir@/log/open5gs/udm.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-udmd/pid`
+@localstatedir@/log/open5gs/udr.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-udrd/pid`
+@localstatedir@/log/open5gs/upf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-upfd/pid`
+@localstatedir@/log/open5gs/sgwc.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-sgwcd/pid`
+@localstatedir@/log/open5gs/sgwu.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-sgwud/pid`
+@localstatedir@/log/open5gs/smf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-smfd/pid`
+@localstatedir@/log/open5gs/mme.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-mmed/pid`
+@localstatedir@/log/open5gs/amf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-amfd/pid`

configs/open5gs/amf.yaml.in

@@ -0,0 +1,303 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,ngap,nas,gmm,sbi,amf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/amf.log
+#
+# amf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#        tls:
+#          key: amf.key
+#          pem: amf.pem
+#
+#  o SBI Server(https://127.0.0.5:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.5
+#        tls:
+#          key: amf.key
+#          pem: amf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://amf.open5gs.org:80)
+#    sbi:
+#      name: amf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.5:7777)
+#    sbi:
+#      - addr: 127.0.0.5
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      dev: eth0
+#
+#  <NGAP Server>>
+#
+#  o NGAP Server(all address avaiable)
+#    ngap:
+#
+#  o NGAP Server(0.0.0.0:38412)
+#    ngap:
+#      addr: 0.0.0.0
+#
+#  o NGAP Server(127.0.0.5:38412, [::1]:38412)
+#    ngap:
+#      - addr: 127.0.0.5
+#      - addr: ::1
+#
+#  o NGAP Server(different port)
+#    ngap:
+#      - addr: 127.0.0.5
+#        port: 38413
+#
+#  o NGAP Server(address avaiable in `eth0` interface)
+#    ngap:
+#      dev: eth0
+#
+#  <GUAMI>
+#
+#  o Multiple GUAMI
+#    guami:
+#      - plmn_id:
+#          mcc: 901
+#          mnc: 70
+#        amf_id:
+#          region: 2
+#          set: 1
+#          pointer: 4
+#      - plmn_id:
+#          mcc: 001
+#          mnc: 01
+#        amf_id:
+#          region: 5
+#          set: 2
+#
+#  <TAI>
+#
+#  o Multiple TAI
+#    tai:
+#      - plmn_id:
+#          mcc: 001
+#          mnc: 01
+#        tac: [1, 2, 3]
+#    tai:
+#      - plmn_id:
+#          mcc: 002
+#          mnc: 02
+#        tac: 4
+#      - plmn_id:
+#          mcc: 003
+#          mnc: 03
+#        tac: 5
+#    tai:
+#      - plmn_id:
+#          mcc: 004
+#          mnc: 04
+#        tac: [6, 7]
+#      - plmn_id:
+#          mcc: 005
+#          mnc: 05
+#        tac: 8
+#      - plmn_id:
+#          mcc: 006
+#          mnc: 06
+#        tac: [9, 10]
+#
+#  <PLMN Support>
+#
+#  o Multiple PLMN Support
+#    plmn_support:
+#      - plmn_id:
+#          mcc: 901
+#          mnc: 70
+#        s_nssai:
+#          - sst: 1
+#          - sd: 010000
+#      - plmn_id:
+#          mcc: 901
+#          mnc: 70
+#        s_nssai:
+#          - sst: 1
+#
+#  <Network Name>
+#
+#    network_name:
+#        full: Open5GS
+#        short: Next
+#
+#  <AMF Name>
+#
+#    amf_name: amf1.open5gs.amf.5gc.mnc70.mcc901.3gppnetwork.org
+#
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fe80::1%@loopback_devname@]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fe80::1%@loopback_devname@
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/ausf.yaml.in

@@ -0,0 +1,179 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/ausf.log
+#
+# ausf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#        tls:
+#          key: ausf.key
+#          pem: ausf.pem
+#
+#  o SBI Server(https://127.0.0.11:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.11
+#        tls:
+#          key: ausf.key
+#          pem: ausf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://ausf.open5gs.org:80)
+#    sbi:
+#      name: ausf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.11:7777)
+#    sbi:
+#      - addr: 127.0.0.11
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      dev: eth0
+#
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fe80::1%@loopback_devname@]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fe80::1%@loopback_devname@
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/hss.yaml.in

@@ -0,0 +1,84 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,fd,hss,event,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/hss.log
+
+hss:
+    freeDiameter: @sysconfdir@/freeDiameter/hss.conf
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:

configs/open5gs/meson.build

@@ -0,0 +1,45 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+open5gs_sysconfdir = join_paths(sysconfdir, 'open5gs')
+meson.add_install_script(python3_exe, '-c',
+        mkdir_p.format(open5gs_sysconfdir))
+
+open5gs_conf = '''
+    mme.yaml
+    sgwc.yaml
+    sgwu.yaml
+    smf.yaml
+    amf.yaml
+    upf.yaml
+    hss.yaml
+    pcrf.yaml
+    nrf.yaml
+    ausf.yaml
+    udm.yaml
+    udr.yaml
+    pcf.yaml
+'''.split()
+
+foreach file : open5gs_conf
+    gen = configure_file(
+            input : file + '.in',
+            output : file,
+            configuration : conf_data)
+    meson.add_install_script(python3_exe, '-c',
+            install_conf.format(gen, open5gs_sysconfdir))
+endforeach

configs/open5gs/mme.yaml.in

@@ -0,0 +1,416 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,s1ap,nas,fd,gtp,mme,emm,esm,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/mme.log
+
+#
+# mme:
+#
+#  <S1AP Server>>
+#
+#  o S1AP Server(all address avaiable)
+#    s1ap:
+#
+#  o S1AP Server(0.0.0.0:36412)
+#    s1ap:
+#      addr: 0.0.0.0
+#
+#  o S1AP Server(127.0.0.2:36412, [::1]:36412)
+#    s1ap:
+#      - addr: 127.0.0.2
+#      - addr: ::1
+#
+#  o S1AP Server(different port)
+#    s1ap:
+#      - addr: 127.0.0.2
+#        port: 36413
+#
+#  o S1AP Server(address avaiable in `eth0` interface)
+#    s1ap:
+#      dev: eth0
+#
+#  <GTP-C Server>>
+#
+#  o GTP-C Server(all address avaiable)
+#    gtpc:
+#
+#  o GTP-C Server(127.0.0.2:2123, [::1]:2123)
+#    gtpc:
+#      - addr: 127.0.0.2
+#      - addr: ::1
+#
+#  <SGsAP>
+#
+#  o Single MSC/VLR(127.0.0.2)
+#    sgsap:
+#      addr: 127.0.0.2
+#      map:
+#        tai:
+#          plmn_id:
+#            mcc: 001
+#            mnc: 01
+#          tac: 4130
+#        lai:
+#          plmn_id:
+#            mcc: 001
+#            mnc: 01
+#          lac: 43690
+#      map:
+#        tai:
+#          plmn_id:
+#            mcc: 002
+#            mnc: 02
+#          tac: 4132
+#        lai:
+#          plmn_id:
+#            mcc: 002
+#            mnc: 02
+#          lac: 43692
+#
+#  o Multiple MSC/VLR
+#    sgsap:
+#      - addr: 127.0.0.2
+#        port: 29119
+#        map:
+#          tai:
+#            plmn_id:
+#              mcc: 001
+#              mnc: 01
+#            tac: 4131
+#          lai:
+#            plmn_id:
+#              mcc: 001
+#              mnc: 01
+#            lac: 43691
+#        map:
+#          tai:
+#            plmn_id:
+#              mcc: 002
+#              mnc: 02
+#            tac: 4132
+#          lai:
+#            plmn_id:
+#              mcc: 002
+#              mnc: 02
+#            lac: 43692
+#      - addr
+#         - 127.0.0.4
+#         - fe80::2%@loopback_devname@
+#        map:
+#          tai:
+#            plmn_id:
+#              mcc: 001
+#              mnc: 01
+#            tac: 4132
+#          lai:
+#            plmn_id:
+#              mcc: 002
+#              mnc: 02
+#            lac: 43692
+#      - name: msc.open5gs.org
+#        map:
+#          tai:
+#            plmn_id:
+#              mcc: 001
+#              mnc: 01
+#            tac: 4133
+#          lai:
+#            plmn_id:
+#              mcc: 002
+#              mnc: 02
+#            lac: 43693
+#
+#
+#  <GUMMEI>
+#
+#  o Multiple GUMMEI
+#    gummei:
+#      - plmn_id:
+#          mcc: 001
+#          mnc: 01
+#        mme_gid: 2
+#        mme_code: 1
+#      - plmn_id:
+#          - mcc: 002
+#            mnc: 02
+#          - mcc: 003
+#            mnc: 03
+#        mme_gid: [3, 4]
+#        mme_code:
+#          - 2
+#          - 3
+#
+#
+#  <TAI>
+#
+#  o Multiple TAI
+#    tai:
+#      - plmn_id:
+#          mcc: 001
+#          mnc: 01
+#        tac: [1, 2, 3]
+#    tai:
+#      - plmn_id:
+#          mcc: 002
+#          mnc: 02
+#        tac: 4
+#      - plmn_id:
+#          mcc: 003
+#          mnc: 03
+#        tac: 5
+#    tai:
+#      - plmn_id:
+#          mcc: 004
+#          mnc: 04
+#        tac: [6, 7]
+#      - plmn_id:
+#          mcc: 005
+#          mnc: 05
+#        tac: 8
+#      - plmn_id:
+#          mcc: 006
+#          mnc: 06
+#        tac: [9, 10]
+#
+#
+#  <Network Name>
+#
+#    network_name:
+#        full: Open5GS
+#        short: Next
+#
+#  <MME Name>
+#
+#    mme_name: open5gs-mme0
+#
+mme:
+    freeDiameter: @sysconfdir@/freeDiameter/mme.conf
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei: 
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+    network_name:
+        full: Open5GS
+    mme_name: open5gs-mme0
+
+#
+# sgwc:
+#
+# <GTP-C Client>
+#
+#  o Specify SGW addresses the GTP-C must connect to
+#
+#  o One SGW is defined.
+#    If prefer_ipv4 is not true, [fe80::2%@loopback_devname@] is selected.
+#    gtpc:
+#      addr:
+#        - 127.0.0.3
+#        - fe80::2%@loopback_devname@
+#
+#  o Two SGW are defined. MME selects SGW with round-robin manner per UE
+#    gtpc:
+#      - addr: 127.0.0.3
+#      - addr: fe80::2%@loopback_devname@
+#
+#  o Three SGW are defined. MME selects SGW with round-robin manner per UE
+#    gtpc:
+#      - addr
+#        - 127.0.0.3
+#        - fe80::2%@loopback_devname@
+#      - addr
+#        - 127.0.0.22
+#        - fe80::12%@loopback_devname@
+#      - name: sgw3.open5gs.org
+#
+# <SGW Selection Mode>
+#
+# o Round-Robin
+#
+#   gtpc:
+#     addr: 127.0.0.3
+#     addr: 127.0.2.2
+#     addr: 127.0.4.2
+#
+# o SGW selection by eNodeB TAC
+#   (either single TAC or multiple TACs, DECIMAL representation)
+#
+#   gtpc:
+#     - addr: 127.0.0.3
+#       tac: 26000
+#     - addr: 127.0.2.2
+#       tac: [25000, 27000, 28000]
+#
+# o SGW selection by e_cell_id(28bit)
+#   (either single or multiple e_cell_id, HEX representation)
+#
+#   gtpc:
+#     - addr: 127.0.0.3
+#       e_cell_id: abcde01
+#     - addr: 127.0.2.2
+#       e_cell_id: [12345, a9413, 98765]
+#
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+
+#
+# smf:
+#
+#  <GTP-C Client>
+#
+#  o By default, the SMF uses the first SMF node.
+#    - To use a different APN for each SMF, specify gtpc.apn as the APN name.
+#    - If the HSS uses WebUI to set the SMF IP for each UE,
+#      you can use a specific SMF node for each UE.
+#
+#  o Two SMF are defined. 127.0.0.4:2123 is used.
+#    [fe80::3%@loopback_devname@]:2123 is ignored.
+#    gtpc:
+#      - addr: 127.0.0.4
+#      - addr: fe80::3%@loopback_devname@
+#
+#  o One SMF is defined. if prefer_ipv4 is not true,
+#    [fe80::3%@loopback_devname@] is selected.
+#    gtpc:
+#      - addr:
+#        - 127.0.0.4
+#        - fe80::3%@loopback_devname@
+#
+#  o Two SMF are defined with a different APN.
+#    - Note that if SMF IP for UE is configured in HSS,
+#      the following configurion for this UE is ignored.
+#    gtpc:
+#      - addr: 127.0.0.4
+#        apn: internet
+#      - addr: 127.0.0.5
+#        apn: volte
+#
+#  o If APN is omitted, the default APN uses the first SMF node.
+#    gtpc:
+#      - addr: 127.0.0.4
+#      - addr: 127.0.0.5
+#        apn: volte
+smf:
+    gtpc:
+      - addr:
+        - 127.0.0.4
+        - ::1
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+#  o Use OAI UE
+#    - Remove HashMME in Security-mode command message
+#    - Use the length 1 of EPS network feature support in Attach accept message
+#      use_openair: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# sctp:
+#
+#  o heartbit_interval : 5000 (5secs)
+#  o rto_initial : 3000 (3secs)
+#  o rto_min : 1000 (1sec)
+#  o rto_max : 5000 (5secs)
+#  o max_num_of_ostreams : 30
+#  o max_num_of_istreams : 65535
+#  o max_attempts : 4
+#  o max_initial_timeout : 8000(8secs)
+#  o usrsctp_udp_port : 9899
+#
+sctp:
+
+#
+# time:
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/nrf.yaml.in

@@ -0,0 +1,166 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,nrf,event,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/nrf.log
+
+#
+# nrf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:7777)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#
+#  o SBI Server(https://127.0.0.10:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://nrf.open5gs.org:80)
+#    sbi:
+#      name: nrf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.10:7777)
+#    sbi:
+#      - addr: 127.0.0.10
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      dev: eth0
+#
+nrf:
+    sbi:
+      addr:
+        - 127.0.0.10
+        - ::1
+      port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 10 seconds)
+#
+#  o NF Instance Heartbeat (Disabled)
+#    nf_instance:
+#      heartbeat: 0
+#
+#  o NF Instance Heartbeat (5 seconds)
+#    nf_instance:
+#      heartbeat: 5
+#
+#  o NF Instance Validity (Default : 3600 seconds = 1 hour)
+#
+#  o NF Instance Validity (10 seconds)
+#    nf_instance:
+#      validity: 10
+#
+#  o Subscription Validity (Default : 86400 seconds = 1 day)
+#
+#  o Subscription Validity (Disabled)
+#    subscription:
+#      validity: 0
+#
+#  o Subscription Validity (3600 seconds = 1 hour)
+#    subscription:
+#      validity: 3600
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/pcf.yaml.in

@@ -0,0 +1,181 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,pcf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/pcf.log
+#
+# pcf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#        tls:
+#          key: pcf.key
+#          pem: pcf.pem
+#
+#  o SBI Server(https://127.0.0.13:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.13
+#        tls:
+#          key: pcf.key
+#          pem: pcf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://pcf.open5gs.org:80)
+#    sbi:
+#      name: pcf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.13:7777)
+#    sbi:
+#      - addr: 127.0.0.13
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      dev: eth0
+#
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fe80::1%@loopback_devname@]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fe80::1%@loopback_devname@
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/pcrf.yaml.in

@@ -0,0 +1,87 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,fd,pcrf,event,mem,sock
+logger:
+    file: @localstatedir@/log/open5gs/pcrf.log
+
+pcrf:
+    freeDiameter: @sysconfdir@/freeDiameter/pcrf.conf
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+#  o Legacy support for pre-release LTE 11 devices to do calling
+#    - Replace IPv4/v6 local addr field in AAR Media-Subcomponent AVP by any
+#      no_ipv4v6_local_addr_in_packet_filter: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:

configs/open5gs/sgwc.yaml.in

@@ -0,0 +1,175 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,pfcp,gtp,sgwc,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/sgwc.log
+
+#
+# sgwc:
+#
+#  <GTP-C Server>
+#
+#  o GTP-C Server(127.0.0.3:2123, [fe80::2%@loopback_devname@]:2123)
+#    gtpc:
+#      addr:
+#        - 127.0.0.3
+#        - fe80::2%@loopback_devname@
+#
+#  o On SGW, Same Configuration(127.0.0.3:2123,
+#  [fe80::2%@loopback_devname@]:2123) as below.
+#    gtpc:
+#      - addr: 127.0.0.3
+#      - addr: fe80::2%@loopback_devname@
+#
+#  <PFCP Server>
+#
+#  o PFCP Server(127.0.0.3:8805, ::1:8805)
+#    pfcp:
+#      - addr: 127.0.0.3
+#      - addr: ::1
+#
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+#
+# sgwu:
+#
+#  <PFCP Client>>
+#
+#  o PFCP Client(127.0.0.6:8805)
+#
+#    pfcp:
+#      addr: 127.0.0.6
+#
+#  <SGWU_SELECTION_MODE - EPC only>
+#
+# o Round-Robin
+#   (note that round robin can be disabled for a particular node
+#     by setting flag 'rr' to 0)
+#
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#      - addr: 127.0.0.12
+#        rr: 0
+#      - addr: 127.0.0.18
+#
+# o SGWU selection by eNodeB TAC
+#   (either single TAC or multiple TACs, DECIMAL representation)
+#
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#        tac: 1
+#      - addr: 127.0.0.12
+#        tac: [3,5,8]
+#
+# o SGWU selection by UE's APN (either single APN or multiple APNs)
+#
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#        apn: ims
+#      - addr: 127.0.0.12
+#        apn: [internet, web]
+#
+# o SGWU selection by CellID(e_cell_id: 28bit)
+#   (either single e_cell_id or multiple e_cell_id, HEX representation)
+#
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#        e_cell_id: 463
+#      - addr: 127.0.0.12
+#        e_cell_id: [123456789, 9413]
+#
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/sgwu.yaml.in

@@ -0,0 +1,166 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,pfcp,gtp,sgwu,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/sgwu.log
+
+#
+# sgwu:
+#
+#  <GTP-U Server>
+#
+#  o GTP-U Server(all address available)
+#    gtpu:
+#
+#  o GTP-U Server(127.0.0.6:2152, [::1]:2152)
+#    gtpu:
+#      - addr:
+#        - 127.0.0.6
+#        - ::1
+#
+#  o GTP-U Server(127.0.0.1:2152, [::1]:2152)
+#    gtpu:
+#      - name: localhost
+#
+#  o User Plane IP Resource information
+#    gtpu:
+#      - addr:
+#        - 127.0.0.6
+#        - ::1
+#        teid_range_indication: 4
+#        teid_range: 10
+#        network_instance: internet
+#        source_interface: 0
+#      - addr: 127.0.10.4
+#        teid_range_indication: 4
+#        teid_range: 5
+#        network_instance: ims
+#        source_interface: 1
+#
+#  o Provide custom SGW-U GTP-U address to be advertised inside S1AP messages
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise_addr: 172.24.15.30
+#
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise_addr:
+#        - 127.0.0.1
+#        - ::1
+#
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise_name: sgw1.epc.mnc001.mcc001.3gppnetwork.org
+#
+#    gtpu:
+#      - dev: ens3
+#        advertise_name: sgw1.epc.mnc001.mcc001.3gppnetwork.org
+#
+#  <PFCP Server>
+#
+#  o PFCP Server(127.0.0.6:8805, ::1:8805)
+#    pfcp:
+#      - addr: 127.0.0.6
+#      - addr: ::1
+#
+sgwu:
+    gtpu:
+      - addr: 127.0.0.6
+    pfcp:
+      - addr: 127.0.0.6
+
+#
+# sgwc:
+#
+#  <PFCP Client>>
+#
+#  o PFCP Client(127.0.0.6:8805)
+#
+#    pfcp:
+#      addr: 127.0.0.6
+#
+sgwc:
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/smf.yaml.in

@@ -0,0 +1,356 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,pfcp,fd,pfcp,gtp,smf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/smf.log
+#
+# smf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#        tls:
+#          key: smf.key
+#          pem: smf.pem
+#
+#  o SBI Server(https://127.0.0.4:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.4
+#        tls:
+#          key: smf.key
+#          pem: smf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://smf.open5gs.org:80)
+#    sbi:
+#      name: smf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.4:7777)
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      dev: eth0
+#
+#  <PFCP Server>
+#
+#  o PFCP Server(127.0.0.4:8805, ::1:8805)
+#    pfcp:
+#      - addr: 127.0.0.4
+#      - addr: ::1
+#
+#  <GTP-C Server>
+#
+#  o GTP-C Server(127.0.0.4:2123, [fe80::3%@loopback_devname@]:2123)
+#    gtpc:
+#      addr:
+#        - 127.0.0.4
+#        - fe80::3%@loopback_devname@
+#
+#  o On SMF, Same configuration
+#    (127.0.0.4:2123, [fe80::3%@loopback_devname@]:2123).
+#    gtpc:
+#      - addr: 127.0.0.4
+#      - addr: fe80::3%@loopback_devname@
+#
+#  <PDN Configuration with UE Pool>
+#
+#  o IPv4 Pool
+#    pdn:
+#      addr: 10.45.0.1/16
+#
+#  o IPv4/IPv6 Pool
+#    pdn:
+#      - addr: 10.45.0.1/16
+#      - addr: cafe:1::1/64
+#
+#
+#  o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, cafe:2::1/64
+#    pdn:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: cafe:1::1/64
+#        dnn: internet
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#      - addr: cafe:2::1/64
+#        dnn: ims
+#
+#  o Multiple Devices (default: ogstun)
+#    pdn:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: cafe:1::1/64
+#        dnn: internet
+#        dev: ogstun2
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#        dev: ogstun3
+#      - addr: cafe:2::1/64
+#        dnn: ims
+#        dev: ogstun3
+#
+#  o Pool Range Sample
+#    pdn:
+#      - addr: 10.45.0.1/24
+#        range: 10.45.0.100-10.45.0.200
+#
+#    pdn:
+#      - addr: 10.45.0.1/24
+#        range:
+#          - 10.45.0.5-10.45.0.50
+#          - 10.45.0.100-
+#
+#    pdn:
+#      - addr: 10.45.0.1/24
+#        range:
+#          - -10.45.0.200
+#          - 10.45.0.210-10.45.0.220
+#
+#    pdn:
+#      - addr: 10.45.0.1/16
+#        range:
+#          - 10.45.0.100-10.45.0.200
+#          - 10.45.1.100-10.45.1.200
+#      - addr: cafe::1/64
+#        range:
+#          - cafe::a0-cafe:b0
+#          - cafe::c0-cafe:d0
+#
+#  <Domain Name Server>
+#
+#  o Primary/Secondary can be configured. Others are ignored.
+#
+#  <MTU Size>
+#
+#  o Provisioning a limit on the size of the packets sent by the MS
+#    to avoid packet fragmentation in the backbone network
+#    between the MS and the GGSN/PGW and/or across the (S)Gi reference point)
+#    when some of the backbone links does not support
+#    packets larger then 1500 octets
+#
+#  <P-CSCF>
+#
+#  o Proxy Call Session Control Function
+#
+#    p-cscf:
+#      - 127.0.0.1
+#      - ::1
+#
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    pfcp:
+      - addr: 127.0.0.4
+      - addr: ::1
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter: @sysconfdir@/freeDiameter/smf.conf
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.1:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fe80::1%@loopback_devname@]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fe80::1%@loopback_devname@
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# upf:
+#
+#  <PFCP Client>>
+#
+#  o PFCP Client(127.0.0.7:8805)
+# 
+#    pfcp:
+#      addr: 127.0.0.7
+#
+#  <UPF_SELECTION_MODE - EPC only>
+#
+# o Round-Robin
+#   (note that round robin can be disabled for a particular node
+#     by setting flag 'rr' to 0)
+#
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#      - addr: 127.0.0.12
+#        rr: 0
+#      - addr: 127.0.0.19
+#
+# o UPF selection by eNodeB TAC
+#   (either single TAC or multiple TACs, DECIMAL representation)
+#
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#        tac: 1
+#      - addr: 127.0.0.12
+#        tac: [3,5,8]
+#
+# o UPF selection by UE's DNN/APN (either single DNN/APN or multiple DNNs/APNs)
+#
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#        dnn: ims
+#      - addr: 127.0.0.12
+#        dnn: [internet, web]
+#
+# o UPF selection by CellID(e_cell_id: 28bit, nr_cell_id: 36bit)
+#   (either single enb_id or multiple enb_ids, HEX representation)
+#
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#        e_cell_id: 463
+#      - addr: 127.0.0.12
+#        nr_cell_id: [123456789, 9413]
+#
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/udm.yaml.in

@@ -0,0 +1,179 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,udm,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/udm.log
+#
+# udm:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#        tls:
+#          key: udm.key
+#          pem: udm.pem
+#
+#  o SBI Server(https://127.0.0.12:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.12
+#        tls:
+#          key: udm.key
+#          pem: udm.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://udm.open5gs.org:80)
+#    sbi:
+#      name: udm.open5gs.org
+#
+#  o SBI Server(http://127.0.0.12:7777)
+#    sbi:
+#      - addr: 127.0.0.12
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      dev: eth0
+#
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fe80::1%@loopback_devname@]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fe80::1%@loopback_devname@
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/udr.yaml.in

@@ -0,0 +1,189 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,udr,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/udr.log
+#
+# udr:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#        tls:
+#          key: udr.key
+#          pem: udr.pem
+#
+#  o SBI Server(https://127.0.0.20:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.20
+#        tls:
+#          key: udr.key
+#          pem: udr.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://udr.open5gs.org:80)
+#    sbi:
+#      name: udr.open5gs.org
+#
+#  o SBI Server(http://127.0.0.20:7777)
+#    sbi:
+#      - addr: 127.0.0.20
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      dev: eth0
+#
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fe80::1%@loopback_devname@]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fe80::1%@loopback_devname@
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o NF Instance Heartbeat (Disabled)
+#    nf_instance:
+#      heartbeat: 0
+#
+#  o NF Instance Heartbeat (10 seconds)
+#    nf_instance:
+#      heartbeat: 10
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/upf.yaml.in

@@ -0,0 +1,251 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,pfcp,gtp,upf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/upf.log
+
+#
+# upf:
+#
+#  <PFCP Server>
+#
+#  o PFCP Server(127.0.0.7:8805, ::1:8805)
+#    pfcp:
+#      - addr: 127.0.0.7
+#      - addr: ::1
+#
+#  <GTP-U Server>>
+#
+#  o GTP-U Server(all address available)
+#    gtpu:
+#
+#  o GTP-U Server(127.0.0.7:2152, [::1]:2152)
+#    gtpu:
+#      - addr:
+#        - 127.0.0.7
+#        - ::1
+#
+#  o GTP-U Server(127.0.0.1:2152, [::1]:2152)
+#    gtpu:
+#      name: localhost
+#
+#  o User Plane IP Resource information
+#    gtpu:
+#      - addr:
+#        - 127.0.0.7
+#        - ::1
+#        teid_range_indication: 4
+#        teid_range: 10
+#        network_instance: internet
+#        source_interface: 0
+#      - addr: 127.0.10.4
+#        teid_range_indication: 4
+#        teid_range: 5
+#        network_instance: ims
+#        source_interface: 1
+#
+#  o Provide custom UPF GTP-U address to be advertised inside NGAP messages
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise_addr: 172.24.15.30
+#
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise_addr:
+#        - 127.0.0.1
+#        - ::1
+#
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise_name: upf1.5gc.mnc001.mcc001.3gppnetwork.org
+#
+#    gtpu:
+#      - dev: ens3
+#        advertise_name: upf1.5gc.mnc001.mcc001.3gppnetwork.org
+#
+#
+#  <PDN Configuration with UE Pool>
+#
+#  o IPv4 Pool
+#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#
+#    pdn:
+#      addr: 10.45.0.1/16
+#
+#  o IPv4/IPv6 Pool
+#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#    $ sudo ip addr add cafe:1::1/64 dev ogstun
+#
+#    pdn:
+#      - addr: 10.45.0.1/16
+#      - addr: cafe:1::1/64
+#
+#
+#  o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, cafe:2::1/64
+#    All other APNs use 10.45.0.1/16, cafe:1::1/64
+#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#    $ sudo ip addr add 10.46.0.1/16 dev ogstun
+#    $ sudo ip addr add cafe:1::1/64 dev ogstun
+#    $ sudo ip addr add cafe:2::1/64 dev ogstun
+#
+#    pdn:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: cafe:1::1/64
+#        dnn: internet
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#      - addr: cafe:2::1/64
+#        dnn: ims
+#
+#  o Multiple Devices (default: ogstun)
+#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#    $ sudo ip addr add cafe:1::1/64 dev ogstun2
+#    $ sudo ip addr add 10.46.0.1/16 dev ogstun3
+#    $ sudo ip addr add cafe:2::1/64 dev ogstun3
+#
+#    pdn:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: cafe:1::1/64
+#        dnn: internet
+#        dev: ogstun2
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#        dev: ogstun3
+#      - addr: cafe:2::1/64
+#        dnn: ims
+#        dev: ogstun3
+#
+#  o Pool Range Sample
+#    pdn:
+#      - addr: 10.45.0.1/24
+#        range: 10.45.0.100-10.45.0.200
+#
+#    pdn:
+#      - addr: 10.45.0.1/24
+#        range:
+#          - 10.45.0.5-10.45.0.50
+#          - 10.45.0.100-
+#
+#    pdn:
+#      - addr: 10.45.0.1/24
+#        range:
+#          - -10.45.0.200
+#          - 10.45.0.210-10.45.0.220
+#
+#    pdn:
+#      - addr: 10.45.0.1/16
+#        range:
+#          - 10.45.0.100-10.45.0.200
+#          - 10.45.1.100-10.45.1.200
+#      - addr: cafe::1/64
+#        range:
+#          - cafe::a0-cafe:b0
+#          - cafe::c0-cafe:d0
+#
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+
+#
+# smf:
+#
+#  <PFCP Client>>
+#
+#  o PFCP Client(127.0.0.3:8805)
+#
+#    pfcp:
+#      addr: 127.0.0.3
+#
+smf:
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+#  o Enable Multicast traffic to the UE
+#      multicast: true
+#
+#  o Disable Stateless Address Autoconfiguration for IPv6
+#      no_slaac: true
+#
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 8192 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  8192
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/sample.yaml.in

@@ -0,0 +1,206 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    pfcp:
+      - addr: 127.0.0.4
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    gtpu:
+      - addr: 127.0.0.6
+    pfcp:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/srslte.yaml.in

@@ -0,0 +1,206 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.1.100
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 7
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    pfcp:
+      - addr: 127.0.0.4
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    gtpu:
+      - addr: 127.0.0.6
+    pfcp:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+#nrf:
+#    sbi:
+#      - addr:
+#        - 127.0.0.10
+#        - ::1
+#        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/systemd/99-open5gs.netdev

@@ -0,0 +1,3 @@
+[NetDev]
+Name=ogstun
+Kind=tun

configs/systemd/99-open5gs.network

@@ -0,0 +1,6 @@
+[Match]
+Name=ogstun
+
+[Network]
+Address=10.45.0.1/16
+Address=cafe::1/64

configs/systemd/meson.build

@@ -0,0 +1,51 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+systemd_conf_in = '''
+    open5gs-mmed.service
+    open5gs-sgwcd.service
+    open5gs-smfd.service
+    open5gs-amfd.service
+    open5gs-sgwud.service
+    open5gs-upfd.service
+    open5gs-hssd.service
+    open5gs-pcrfd.service
+    open5gs-nrfd.service
+    open5gs-ausfd.service
+    open5gs-udmd.service
+    open5gs-pcfd.service
+    open5gs-udrd.service
+'''.split()
+
+foreach file : systemd_conf_in
+    configure_file(
+            input : file + '.in',
+            output : file,
+            configuration : conf_data)
+endforeach
+
+systemd_conf = '''
+    99-open5gs.netdev
+    99-open5gs.network        
+'''.split()
+
+foreach file : systemd_conf
+    configure_file(
+            input : file,
+            output : file,
+            configuration : conf_data)
+endforeach

configs/systemd/open5gs-amfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS AMF Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-amfd -c @sysconfdir@/open5gs/amf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-ausfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS AUSF Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-ausfd -c @sysconfdir@/open5gs/ausf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-hssd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS HSS Daemon
+Wants=mongodb.service mongod.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-hssd -c @sysconfdir@/open5gs/hss.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-mmed.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS MME Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-mmed -c @sysconfdir@/open5gs/mme.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-nrfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS NRF Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-nrfd -c @sysconfdir@/open5gs/nrf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-pcfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS PCF Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-pcfd -c @sysconfdir@/open5gs/pcf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-pcrfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS PCRF Daemon
+Wants=mongodb.service mongod.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-pcrfd -c @sysconfdir@/open5gs/pcrf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-sgwcd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS SGW-C Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-sgwcd -c @sysconfdir@/open5gs/sgwc.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-sgwud.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS SGW-U Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-sgwud -c @sysconfdir@/open5gs/sgwu.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-smfd.service.in

@@ -0,0 +1,19 @@
+[Unit]
+Description=Open5GS SMF Daemon
+After=networking.service
+Requires=systemd-networkd.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-smfd -c @sysconfdir@/open5gs/smf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-udmd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS UDM Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-udmd -c @sysconfdir@/open5gs/udm.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-udrd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS UDR Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-udrd -c @sysconfdir@/open5gs/udr.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-upfd.service.in

@@ -0,0 +1,19 @@
+[Unit]
+Description=Open5GS UPF Daemon
+After=networking.service
+Requires=systemd-networkd.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-upfd -c @sysconfdir@/open5gs/upf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/volte.yaml.in

@@ -0,0 +1,211 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 001
+        mnc: 01
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 001
+        mnc: 01
+      tac: 12345
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    pfcp:
+      - addr: 127.0.0.4
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    p-cscf:
+      - 127.0.0.1
+      - ::1
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 001
+          mnc: 01
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 001
+          mnc: 01
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 001
+          mnc: 01
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    gtpu:
+      - addr: 127.0.0.6
+    pfcp:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+        - identity: pcscf.localdomain
+          addr: 127.0.0.1
+
+#nrf:
+#    sbi:
+#      - addr:
+#        - 127.0.0.10
+#        - ::1
+#        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configs/vonr.yaml.in

@@ -0,0 +1,211 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+parameter:
+#    no_nrf: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 901
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    pfcp:
+      - addr: 127.0.0.4
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    p-cscf:
+      - 127.0.0.1
+      - ::1
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 901
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    gtpu:
+      - addr: 127.0.0.6
+    pfcp:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    pdn:
+      - addr: 10.45.0.1/16
+      - addr: cafe::1/64
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      load_extension:
+        - module: @freediameter_extensions_builddir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @freediameter_extensions_builddir@/dict_rfc5777.fdx
+        - module: @freediameter_extensions_builddir@/dict_mip6i.fdx
+        - module: @freediameter_extensions_builddir@/dict_nasreq.fdx
+        - module: @freediameter_extensions_builddir@/dict_nas_mipv6.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca.fdx
+        - module: @freediameter_extensions_builddir@/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+        - identity: pcscf.localdomain
+          addr: 127.0.0.1
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777

configure.ac

@@ -1,486 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-dnl
-dnl This file is free software; as a special exception the author gives
-dnl unlimited permission to copy and/or distribute it, with or without
-dnl modifications, as long as this notice is preserved.
-dnl
-dnl This program is distributed in the hope that it will be useful, but
-dnl WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
-dnl implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-AC_INIT([NEXTEPC], [0.3.0], [acetcom@gmail.com])
-
-AC_SUBST(LIBVERSION)
-LIBVERSION=1:0:0
-
-CORE_CONFIG_NICE(config.nice)
-
-dnl Must come before AM_INIT_AUTOMAKE.
-AC_CONFIG_AUX_DIR([build-aux])
-AM_INIT_AUTOMAKE([1.10 -Wall -Werror foreign subdir-objects])
-
-# Where to generate output; srcdir location.
-AC_CONFIG_HEADERS([config.h:config.in])dnl Keep filename to 8.3 for MS-DOS.
-AC_CONFIG_SRCDIR([main.c])
-AC_CANONICAL_HOST
-
-LO_DEV="lo0"
-case $host in
-    *linux*)
-        OSDIR="unix"
-        OSCPPFLAGS="-DLINUX=1"
-        IPFW_CPPFLAGS="-DNEED_SYSCTLBYNAME -DNEED_SIN_LEN"
-        LO_DEV="lo"
-        ;;
-    *-apple-darwin*)
-        OSDIR="unix"
-        OSCPPFLAGS="-DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK"
-        ;;
-    *)
-        OSDIR="unix"
-        ;;
-esac
-AC_SUBST(OSCPPFLAGS)
-AC_SUBST(OSDIR)
-AC_SUBST(IPFW_CPPFLAGS)
-AC_SUBST(LO_DEV)
-
-AH_TOP([
-#ifndef __NEXTEPC_CONFIG_H__
-#define __NEXTEPC_CONFIG_H__
-/* need this, because some autoconf tests rely on this (e.g. stpcpy)
- * and it should be used for new programs  */
-#define _DEFAULT_SOURCE 1
-#define _BSD_SOURCE  	1
-])
-
-AH_BOTTOM([
-#endif /* __NEXTEPC_CONFIG_H__ */
-])
-
-AH_VERBATIM([_REENTRANT],
-[/* To allow the use of core in multithreaded programs we have to use
-    special features from the library. */
-#ifndef _REENTRANT
-# define _REENTRANT 1
-#endif
-])
-
-dnl kernel style compile messages
-m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
-
-dnl Checks CC and freinds
-AC_PROG_MAKE_SET
-AC_PROG_MKDIR_P
-AC_PROG_CC
-AC_PROG_INSTALL
-AM_PROG_AR
-LT_INIT([pic-only disable-static])
-
-AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
-if test "x$PKG_CONFIG" = "xno"; then
-	AC_MSG_ERROR([You need to install pkg-config])
-fi
-PKG_PROG_PKG_CONFIG([0.20])
-
-dnl Checks for compile flag
-AX_CHECK_COMPILE_FLAG([-Wno-unused-result], [CFLAGS="$CFLAGS -Wno-unused-result"])
-
-dnl Checks for pointer size
-AC_CHECK_SIZEOF(void*, 4)
-
-dnl Checks for integer size
-AC_CHECK_SIZEOF(char, 1)
-AC_CHECK_SIZEOF(int, 4)
-AC_CHECK_SIZEOF(long, 4)
-AC_CHECK_SIZEOF(short, 2)
-AC_CHECK_SIZEOF(long long, 8)
-
-if test "$ac_cv_sizeof_short" = "2"; then
-    short_value=short
-fi
-if test "$ac_cv_sizeof_int" = "4"; then
-    int_value=int
-fi
-# Now we need to find what c_int64_t (sizeof == 8) will be.
-# The first match is our preference.
-if test "$ac_cv_sizeof_int" = "8"; then
-    int64_literal='#define C_INT64_C(val) (val)'
-    uint64_literal='#define C_UINT64_C(val) (val##U)'
-    int64_t_fmt='#define C_INT64_T_FMT "d"'
-    uint64_t_fmt='#define C_UINT64_T_FMT "u"'
-    uint64_t_hex_fmt='#define C_UINT64_T_HEX_FMT "x"'
-    int64_value="int"
-    long_value=int
-    int64_strfn="strtoi"
-elif test "$ac_cv_sizeof_long" = "8"; then
-    int64_literal='#define C_INT64_C(val) (val##L)'
-    uint64_literal='#define C_UINT64_C(val) (val##UL)'
-    int64_t_fmt='#define C_INT64_T_FMT "ld"'
-    uint64_t_fmt='#define C_UINT64_T_FMT "lu"'
-    uint64_t_hex_fmt='#define C_UINT64_T_HEX_FMT "lx"'
-    int64_value="long"
-    long_value=long
-    int64_strfn="strtol"
-elif test "$ac_cv_sizeof_long_long" = "8"; then
-    int64_literal='#define C_INT64_C(val) (val##LL)'
-    uint64_literal='#define C_UINT64_C(val) (val##ULL)'
-    # Linux, Solaris, FreeBSD all support ll with printf.
-    # BSD 4.4 originated 'q'.  Solaris is more popular and
-    # doesn't support 'q'.  Solaris wins.  Exceptions can
-    # go to the OS-dependent section.
-    int64_t_fmt='#define C_INT64_T_FMT "lld"'
-    uint64_t_fmt='#define C_UINT64_T_FMT "llu"'
-    uint64_t_hex_fmt='#define C_UINT64_T_HEX_FMT "llx"'
-    int64_value="long long"
-    long_value="long long"
-    int64_strfn="strtoll"
-elif test "$ac_cv_sizeof_longlong" = "8"; then
-    int64_literal='#define C_INT64_C(val) (val##LL)'
-    uint64_literal='#define C_UINT64_C(val) (val##ULL)'
-    int64_t_fmt='#define C_INT64_T_FMT "qd"'
-    uint64_t_fmt='#define C_UINT64_T_FMT "qu"'
-    uint64_t_hex_fmt='#define C_UINT64_T_HEX_FMT "qx"'
-    int64_value="__int64"
-    long_value="__int64"
-    int64_strfn="strtoll"
-else
-    # int64_literal may be overriden if your compiler thinks you have
-    # a 64-bit value but CORE does not agree.
-    AC_ERROR([could not detect a 64-bit integer type])
-fi
-
-AC_SUBST(short_value)
-AC_SUBST(int_value)
-AC_SUBST(long_value)
-AC_SUBST(int64_value)
-AC_SUBST(int64_t_fmt)
-AC_SUBST(uint64_t_fmt)
-AC_SUBST(uint64_t_hex_fmt)
-AC_SUBST(int64_literal)
-AC_SUBST(uint64_literal)
-
-AC_CHECK_SIZEOF(pid_t, 8)
-
-if test "$ac_cv_sizeof_pid_t" = "$ac_cv_sizeof_short"; then
-    pid_t_fmt='#define C_PID_T_FMT "hd"'
-elif test "$ac_cv_sizeof_pid_t" = "$ac_cv_sizeof_int"; then
-    pid_t_fmt='#define C_PID_T_FMT "d"'
-elif test "$ac_cv_sizeof_pid_t" = "$ac_cv_sizeof_long"; then
-    pid_t_fmt='#define C_PID_T_FMT "ld"'
-elif test "$ac_cv_sizeof_pid_t" = "$ac_cv_sizeof_long_long"; then
-    pid_t_fmt='#define C_PID_T_FMT APR_INT64_T_FMT'
-else
-    pid_t_fmt='#error Can not determine the proper size for pid_t'
-fi
-
-case $host in
-   *-solaris*)
-       if test "$ac_cv_sizeof_long" = "8"; then
-         pid_t_fmt='#define C_PID_T_FMT "d"'
-       else
-         pid_t_fmt='#define C_PID_T_FMT "ld"'
-       fi
-       ;;
-esac
-
-AC_SUBST(pid_t_fmt)
-
-AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
-        [`echo $PACKAGE_VERSION | $SED 's/^\([[^\.]]\+\)\.\([[^\.]]\+\)\.\([[^\.]]\+\).*/\1/'`],
-        [Major version of this package])
-AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
-        [`echo $PACKAGE_VERSION | $SED 's/^\([[^\.]]\+\)\.\([[^\.]]\+\)\.\([[^\.]]\+\).*/\2/'`],
-        [Minor version of this package])
-AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL],
-        [`echo $PACKAGE_VERSION | $SED 's/^\([[^\.]]\+\)\.\([[^\.]]\+\)\.\([[^\.]]\+\).*/\3/'`],
-        [Patch version of this package])
-
-##################################
-#### Checks for Directories. #####
-##################################
-
-adl_RECURSIVE_EVAL(["${bindir}"], [BIN_DIR])
-adl_RECURSIVE_EVAL(["${libdir}"], [LIB_DIR])
-adl_RECURSIVE_EVAL(["${sysconfdir}"], [SYSCONF_DIR])
-adl_RECURSIVE_EVAL(["${localstatedir}"], [LOCALSTATE_DIR])
-AC_SUBST(BIN_DIR)
-AC_SUBST(LIB_DIR)
-AC_SUBST(SYSCONF_DIR)
-AC_SUBST(LOCALSTATE_DIR)
-
-##################################
-#### Checks for header files. ####
-##################################
-
-AC_HEADER_STDC
-AC_CHECK_HEADERS( \
-    arpa/inet.h \
-    ctype.h \
-    errno.h \
-    fcntl.h \
-    ifaddrs.h \
-    limits.h \
-    netdb.h \
-    pthread.h \
-    regex.h \
-    semaphore.h \
-    signal.h \
-    stdarg.h \
-    stdio.h \
-    stdint.h \
-    stdlib.h \
-    string.h \
-    strings.h \
-    time.h \
-    unistd.h \
-    net/if_dl.h \
-    net/if.h \
-    netinet/ether.h \
-    netinet/in.h \
-    netinet/in_systm.h \
-    netinet/udp.h \
-    netinet/tcp.h \
-    netinet/sctp.h \
-    usrsctp.h \
-    sys/ioctl.h \
-    sys/param.h \
-    sys/socket.h \
-    sys/stat.h \
-    sys/syslimits.h \
-    sys/types.h \
-    sys/time.h \
-    sys/wait.h \
-    sys/uio.h \
-)
-
-AC_CHECK_HEADERS(netinet/ip.h netinet/ip6.h net/route.h,,,[[
-#include <sys/types.h>
-#if HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#include <netinet/in.h>
-#if HAVE_NETINET_IN_SYSTM_H
-#include <netinet/in_systm.h>
-#endif
-]])
-
-AC_CHECK_HEADERS(netinet/ip_icmp.h netinet/icmp6.h,,,[[
-#include <sys/types.h>
-#if HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#include <netinet/in.h>
-#if HAVE_NETINET_IN_SYSTM_H
-#include <netinet/in_systm.h>
-#endif
-#include <netinet/ip.h>
-]])
-
-##########################################
-#### Checks for typedefs, structures, ####
-####  and compiler characteristics.   ####
-##########################################
-
-AC_C_BIGENDIAN
-
-AC_CHECK_MEMBERS([struct tm.tm_gmtoff, struct tm.__tm_gmtoff],,,[
-#include <sys/types.h>
-#include <time.h>])
-
-AC_CHECK_MEMBER(struct sockaddr.sa_len,
-                AC_DEFINE(HAVE_SA_LEN, 1, [Define this if your stack has sa_len in sockaddr struct.]),,
-                [#ifdef HAVE_SYS_TYPES_H
-                 #include <sys/types.h>
-                 #endif
-                 #include <sys/socket.h>])
-
-AC_CHECK_MEMBER(struct sockaddr_in.sin_len,
-                AC_DEFINE(HAVE_SIN_LEN, 1, [Define this if your IPv4 has sin_len in sockaddr_in struct.]),,
-                [#ifdef HAVE_SYS_TYPES_H
-                 #include <sys/types.h>
-                 #endif
-                 #include <netinet/in.h>])
-
-AC_CHECK_MEMBER(struct sockaddr_in6.sin6_len,
-                AC_DEFINE(HAVE_SIN6_LEN, 1, [Define this if your IPv6 has sin6_len in sockaddr_in6 struct.]),,
-                [#ifdef HAVE_SYS_TYPES_H
-                 #include <sys/types.h>
-                 #endif
-                 #include <netinet/in.h>])
-
-AC_CHECK_MEMBER(struct sockaddr_conn.sconn_len,
-                AC_DEFINE(HAVE_SCONN_LEN, 1, [Define this if your userland stack has sconn_len in sockaddr_conn struct.]),,
-                [#include "usrsctplib/usrsctp.h"])
-
-AC_MSG_CHECKING(for socklen_t)
-AC_TRY_COMPILE([#ifdef HAVE_SYS_TYPES_H
-                #include <sys/types.h>
-                #endif
-                #include <sys/socket.h>],
-               [socklen_t x; x = 1; return ((int)x);],
-               [AC_MSG_RESULT(yes)],
-               [AC_MSG_RESULT(int)
-                AC_DEFINE(socklen_t, int, [Define a type for socklen_t.])])
-
-AC_CHECK_FILE(/dev/random,
-    AC_DEFINE([HAVE_DEV_RANDOM], [1],
-        [Define to 1 if you have the /dev/random file.]))
-
-AC_CACHE_CHECK([whether the compiler provides atomic builtins], [ap_cv_atomic_builtins],
-[AC_TRY_RUN([
-int main()
-{
-    unsigned long val = 1010, tmp, *mem = &val;
-
-    if (__sync_fetch_and_add(&val, 1010) != 1010 || val != 2020)
-        return 1;
-
-    tmp = val;
-
-    if (__sync_fetch_and_sub(mem, 1010) != tmp || val != 1010)
-        return 1;
-
-    if (__sync_sub_and_fetch(&val, 1010) != 0 || val != 0)
-        return 1;
-
-    tmp = 3030;
-
-    if (__sync_val_compare_and_swap(mem, 0, tmp) != 0 || val != tmp)
-        return 1;
-
-    if (__sync_lock_test_and_set(&val, 4040) != 3030)
-        return 1;
-
-    mem = &tmp;
-
-    if (__sync_val_compare_and_swap(&mem, &tmp, &val) != &tmp)
-        return 1;
-
-    __sync_synchronize();
-
-    if (mem != &val)
-        return 1;
-
-    return 0;
-}], [ap_cv_atomic_builtins=yes], [ap_cv_atomic_builtins=no], [ap_cv_atomic_builtins=no])])
-
-if test "$ap_cv_atomic_builtins" = "yes"; then
-    AC_DEFINE(HAVE_ATOMIC_BUILTINS, 1, [Define if compiler provides atomic builtins])
-fi
-
-#######################################
-#### Checks for library functions. ####
-#######################################
-
-AC_FUNC_VPRINTF
-AC_CHECK_FUNCS(\
-    atexit \
-    gettimeofday \
-    inet_ntop \
-    inet_pton \
-    inet_aton \
-    memmove \
-    sigaction \
-    sigwait \
-    sigsuspend \
-    stpcpy \
-    strcasecmp \
-    strtoul \
-    stricmp \
-    strerror \
-    writev \
-    utime \
-    utimes \
-    sem_timedwait \
-    pthread_yield \
-    sched_yield \
-)
-
-AC_SEARCH_LIBS(gethostbyname, nsl)
-AC_SEARCH_LIBS(gethostname, nsl)
-AC_SEARCH_LIBS(socket, socket)
-AC_SEARCH_LIBS(pthread_barrier_wait, pthread)
-AC_SEARCH_LIBS(gnutls_global_set_log_level, gnutls)
-
-AC_SEARCH_LIBS([sctp_sendmsg], [sctp], [have_sctp_lib=yes], [have_sctp_lib=no])
-if test x$have_sctp_lib == xno; then
-  AC_SEARCH_LIBS([usrsctp_init], [usrsctp], [have_usrsctp_lib=yes], [have_usrsctp_lib=no])
-  if test x$have_usrsctp_lib == xno; then
-    AC_MSG_ERROR([You must install the SCTP libraries and development headers to enable SCTP support.])
-  else
-    AC_DEFINE([USE_USRSCTP], [1], [Define to 1 if you have the usrsctp library.])
-  fi 
-fi
-AM_CONDITIONAL([USRSCTP], [test x$have_usrsctp_lib = xyes])
-
-PKG_CHECK_MODULES([YAML], yaml-0.1 >= 0.1.4)
-PKG_CHECK_MODULES([MONGOC], libmongoc-1.0 >= 1.3.1)
-FREEDIAMETER_DIR=freeDiameter-1.2.1
-AC_SUBST(FREEDIAMETER_DIR)
-
-#####################
-#### Conclusion. ####
-#####################
-
-AC_CONFIG_SUBDIRS([lib/freeDiameter-1.2.1])
-
-AC_CONFIG_FILES([lib/core/include/core.h])
-AC_CONFIG_FILES([lib/core/src/Makefile])
-AC_CONFIG_FILES([lib/core/test/Makefile])
-AC_CONFIG_FILES([lib/core/Makefile])
-AC_CONFIG_FILES([lib/s1ap/asn1c/Makefile])
-AC_CONFIG_FILES([lib/s1ap/Makefile])
-AC_CONFIG_FILES([lib/nas/Makefile])
-AC_CONFIG_FILES([lib/fd/Makefile])
-AC_CONFIG_FILES([lib/gtp/Makefile])
-AC_CONFIG_FILES([lib/ipfw/Makefile])
-AC_CONFIG_FILES([lib/Makefile])
-AC_CONFIG_FILES([src/app/Makefile])
-AC_CONFIG_FILES([src/mme/Makefile])
-AC_CONFIG_FILES([src/hss/Makefile])
-AC_CONFIG_FILES([src/sgw/Makefile])
-AC_CONFIG_FILES([src/pgw/Makefile])
-AC_CONFIG_FILES([src/pcrf/Makefile])
-AC_CONFIG_FILES([src/Makefile])
-AC_CONFIG_FILES([support/config/nextepc.conf])
-AC_CONFIG_FILES([support/config/mme.conf])
-AC_CONFIG_FILES([support/config/sgw.conf])
-AC_CONFIG_FILES([support/config/pgw.conf])
-AC_CONFIG_FILES([support/config/hss.conf])
-AC_CONFIG_FILES([support/config/pcrf.conf])
-AC_CONFIG_FILES([support/config/Makefile])
-AC_CONFIG_FILES([support/freeDiameter/mme.conf])
-AC_CONFIG_FILES([support/freeDiameter/pgw.conf])
-AC_CONFIG_FILES([support/freeDiameter/hss.conf])
-AC_CONFIG_FILES([support/freeDiameter/pcrf.conf])
-AC_CONFIG_FILES([support/freeDiameter/Makefile])
-AC_CONFIG_FILES([support/systemd/nextepc-mmed.service])
-AC_CONFIG_FILES([support/systemd/nextepc-sgwd.service])
-AC_CONFIG_FILES([support/systemd/nextepc-pgwd.service])
-AC_CONFIG_FILES([support/systemd/nextepc-hssd.service])
-AC_CONFIG_FILES([support/systemd/nextepc-pcrfd.service])
-AC_CONFIG_FILES([support/systemd/Makefile])
-AC_CONFIG_FILES([support/logrotate/nextepc])
-AC_CONFIG_FILES([support/logrotate/Makefile])
-AC_CONFIG_FILES([support/newsyslog/nextepc.conf])
-AC_CONFIG_FILES([support/newsyslog/Makefile])
-AC_CONFIG_FILES([support/Makefile])
-AC_CONFIG_FILES([test/Makefile])
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
-
-echo "
-NextEPC configuration
---------------------
-version                 : ${PACKAGE_VERSION}
-host                    : ${host}
-source code location    : ${srcdir}
-compiler                : ${CC}
-compiler flags          : ${CFLAGS} ${YAML_CFLAGS} ${MONGOC_CFLAGS} 
-linker flags            : ${LDFLAGS} ${LIBS} ${YAML_LIBS} ${MONGOC_LIBS}
-bin directory           : ${BIN_DIR}
-lib directory           : ${LIB_DIR}/nextepc
-config directory        : ${SYSCONF_DIR}/nextepc
-log directory           : ${LOCALSTATE_DIR}/log/nextepc
-"

debian/compat

@@ -1 +1 @@
-9
+11

debian/control

@@ -1,111 +1,133 @@
-Source: nextepc
-Maintainer: Harald Welte <laforge@gnumonks.org>
+Source: open5gs
 Section: net
 Priority: optional
-Build-Depends: debhelper (>= 9),
-               autotools-dev,
-               pkg-config,
+Maintainer: Harald Welte <laforge@gnumonks.org>
+Uploaders: Sukchan Lee <acetcom@gmail.com>
+Build-Depends: debhelper (>= 11),
                git,
-               dh-autoreconf,
-               dh-systemd,
+               pkg-config,
+               meson (>= 0.43.0),
                flex,
                bison,
-               libsctp-dev,
                libgnutls28-dev,
                libgcrypt-dev,
                libssl-dev,
+               libidn11-dev,
                libmongoc-dev,
                libbson-dev,
-               libyaml-dev
-Standards-Version: 3.9.6
-Vcs-Browser: https://github.com/acetcom/nextepc
-Vcs-Git: git://github.com/acetcom/nextepc
-Homepage: http://nextepc.org/
+               libsctp-dev,
+               libyaml-dev,
+               libmicrohttpd-dev,
+               libcurl4-gnutls-dev,
+               libnghttp2-dev,
+Standards-Version: 4.3.0
+Rules-Requires-Root: no
+Homepage: https://open5gs.org
+Vcs-Browser: https://github.com/open5gs/open5gs
+Vcs-Git: git://github.com/open5gs/open5gs
 
-Package: nextepc-core
+Package: open5gs-common
 Architecture: any
 Multi-Arch: same
 Depends: ${shlibs:Depends},
          ${misc:Depends}
-Description: Open Source based 3GPP EPC (Shared Files)
- NextEPC is a C-language Open Source implementation of the 3GPP Evolved
- Packet Core, i.e. the core network of an LTE network.
+Description: 5G Core and EPC (Shared Files)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
  .
  This package contains some core libraries/plugins required by the other
- binary packages such as nextepc-{mme,sgw,pgw,pcrf,hss}.
+ binary packages such as open5gs-{mme,sgwc,sgwu,amf,smf,upf,...}.
 
-Package: nextepc-mme
+Package: open5gs-mme
 Architecture: any
 Multi-Arch: same
 Depends: ${shlibs:Depends},
          ${misc:Depends},
-         nextepc-core (= ${binary:Version})
-Description: Open Source based 3GPP EPC MME (Mobility Management Entity)
- NextEPC is a C-language Open Source implementation of the 3GPP Evolved
- Packet Core, i.e. the core network of an LTE network.
+         open5gs-common (= ${binary:Version})
+Description: MME (Mobility Management Entity)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
  .
  This package provides the MME (Mobility Management Engine), which
  terminates the S1 interfaces from the eNodeBs cells in the cellular
- network, and interfaces via S11 to the SGW as well as via S6a to the
+ network, and interfaces via S11 to the SGW-C as well as via S6a to the
  HSS.
 
-Package: nextepc-sgw
+Package: open5gs-sgwc
 Architecture: any
 Multi-Arch: same
 Depends: ${shlibs:Depends},
          ${misc:Depends},
-         nextepc-core (= ${binary:Version})
-Description: Open Source based 3GPP EPC SGW (Serving Gateway)
- NextEPC is a C-language Open Source implementation of the 3GPP Evolved
- Packet Core, i.e. the core network of an LTE network.
+         open5gs-common (= ${binary:Version})
+Description: SGW-C (Serving Gateway - Control Plane)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
  .
- This package provides the SGW (Serving Gateway) which is situated
- between the MME and PGW.  It implements the S11 interface to the MME,
- and the S5 interface to the PGW.
+ This package provides the SGW-C (Serving Gateway - Control Plane)
+ which is situated between the MME and PGW. It implements the S11 interface
+ to the MME, and the S5 interface to the SMF-C.
 
-Package: nextepc-pgw
+Package: open5gs-smf
 Architecture: any
 Multi-Arch: same
 Depends: ${shlibs:Depends},
          ${misc:Depends},
-         nextepc-core (= ${binary:Version}),
-         ifupdown
-Description: Open Source based 3GPP EPC PGW (Packet Data Network Gateway)
- NextEPC is a C-language Open Source implementation of the 3GPP Evolved
- Packet Core, i.e. the core network of an LTE network.
+         open5gs-common (= ${binary:Version})
+Description: SMF (Session Management Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
  .
- This package provides the PGW or PDN-GW (Packet Data Network Gateway)
- element of the EPC, i.e. the gateway between the EPC and the external
- packet data network, such as the public Internet.  It implements the S5
- interface towards the S-GW, the SGi interface towards the Internet,
- and the S7 interface towards the PCRF.
+ This package provides the SMF (Session Management Function)
 
-Package: nextepc-pcrf
+Package: open5gs-amf
 Architecture: any
 Multi-Arch: same
 Depends: ${shlibs:Depends},
          ${misc:Depends},
-         mongodb,
-         nextepc-core (= ${binary:Version})
-Description: Open Source based 3GPP EPC PCRF (Policy and Charging Rules Function)
- NextEPC is a C-language Open Source implementation of the 3GPP Evolved
- Packet Core, i.e. the core network of an LTE network.
+         open5gs-common (= ${binary:Version})
+Description: AMF (Access and Mobility Management Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
  .
- This package contains the PCRF (Policy and Charging Rules Function),
- which controls the service quality (QoS) of individual connections and
- how to account/charge related traffic.  It implements the Gx interface
- towards the PGW using the DIAMETER protocol.
+ This package provides the AMF (Access and Mobility Management Function)
 
-Package: nextepc-hss
+Package: open5gs-sgwu
 Architecture: any
 Multi-Arch: same
 Depends: ${shlibs:Depends},
          ${misc:Depends},
-         mongodb,
-         nextepc-core (= ${binary:Version})
-Description: Open Source based 3GPP EPC HSS (Home Subscriber Server)
- NextEPC is a C-language Open Source implementation of the 3GPP Evolved
- Packet Core, i.e. the core network of an LTE network.
+         open5gs-common (= ${binary:Version})
+Description: SGW-U (Serving Gateway - User Plane)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the SGW-U (Serving Gateway - User Plane)
+ which is situated between the eNB and UPF. It implements the S1U interface
+ to the eNB, and the S5U interface to the SMF-U.
+
+Package: open5gs-upf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         udev,
+         open5gs-common (= ${binary:Version})
+Description: UPF (User Plane Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the UPF (User Plane Function)
+
+Package: open5gs-hss
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         mongodb-org | mongodb,
+         open5gs-common (= ${binary:Version})
+Description: HSS (Home Subscriber Server)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
  .
  This package provides the HSS (Home Subscriber Server) element of the
  EPC, i.e. the central database of mobile network subscribers, with
@@ -113,21 +135,113 @@ Description: Open Source based 3GPP EPC HSS (Home Subscriber Server)
  information, etc.  It implements the S6a interface towards the MME
  using the DIAMETER protocol.
 
-Package: nextepc
+Package: open5gs-pcrf
 Architecture: any
 Multi-Arch: same
 Depends: ${shlibs:Depends},
          ${misc:Depends},
-         mongodb,
-         nextepc-core (= ${binary:Version}),
-         nextepc-mme (= ${binary:Version}),
-         nextepc-sgw (= ${binary:Version}),
-         nextepc-pgw (= ${binary:Version}),
-         nextepc-hss (= ${binary:Version}),
-         nextepc-pcrf (= ${binary:Version})
-Description: Open Source based 3GPP EPC (metapackage)
- NextEPC is a C-language Open Source implementation of the 3GPP Evolved
- Packet Core, i.e. the core network of an LTE network.
+         mongodb-org | mongodb,
+         open5gs-common (= ${binary:Version})
+Description: PCRF (Policy and Charging Rules Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
  .
- This is a metapackage that depends on all the nextepc parts.
- (MME, SGW, PGW, HSS, PCRF)
+ This package contains the PCRF (Policy and Charging Rules Function),
+ which controls the service quality (QoS) of individual connections and
+ how to account/charge related traffic.  It implements the Gx interface
+ towards the SMF-C using the DIAMETER protocol.
+
+Package: open5gs-nrf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: NRF (Network Repository Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the NRF (Network Repository Function)
+
+Package: open5gs-ausf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: AUSF (Authentication Server Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the AUSF (Authentication Server Function)
+
+Package: open5gs-udm
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: UDM (Unified Data Management)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the UDM (Unified Data Managemement)
+
+Package: open5gs-pcf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: PCF (Policy Control Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the PCF (Policy Control Function)
+
+Package: open5gs-udr
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: UDR (Unified Data Repository)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the UDR (Unified Data Repository)
+
+Package: open5gs
+Architecture: any
+Multi-Arch: same
+Depends: ${misc:Depends},
+         open5gs-common (= ${binary:Version}),
+         open5gs-mme (= ${binary:Version}),
+         open5gs-sgwc (= ${binary:Version}),
+         open5gs-smf (= ${binary:Version}),
+         open5gs-amf (= ${binary:Version}),
+         open5gs-sgwu (= ${binary:Version}),
+         open5gs-upf (= ${binary:Version}),
+         open5gs-hss (= ${binary:Version}),
+         open5gs-pcrf (= ${binary:Version}),
+         open5gs-nrf (= ${binary:Version}),
+         open5gs-ausf (= ${binary:Version}),
+         open5gs-udm (= ${binary:Version}),
+         open5gs-pcf (= ${binary:Version}),
+         open5gs-udr (= ${binary:Version})
+Description: 5G Core and EPC (metapackage)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This is a metapackage that depends on all the open5gs parts.
+
+Package: open5gs-dbg
+Architecture: any
+Multi-Arch: same
+Depends: ${misc:Depends},
+         open5gs (= ${binary:Version})
+Description: Debug symbols for Open5GS
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package contains debug symbols for Open5GS.

debian/copyright

@@ -1,9 +1,9 @@
 Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
-Upstream-Name: nextepc
-Source: https://github.com/acetcom/nextepc
+Upstream-Name: open5gs
+Source: https://github.com/open5gs/open5gs
 
 Files: *
-Copyright: 2017 NextEPC Group
+Copyright: 2017 Open5GS Group
 License: AGPL-3
 
 Files: lib/freeDiameter-1.2.1/*

debian/nextepc-core.install

@@ -1,5 +0,0 @@
-usr/lib/*/nextepc/*
-var/log/nextepc
-etc/nextepc/nextepc.conf
-etc/nextepc/freeDiameter/cacert.pem
-support/logrotate/nextepc /etc/logrotate.d

debian/nextepc-core.postinst

@@ -1,52 +0,0 @@
-#!/bin/sh
-# postinst script for nextepc
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postinst> `configure' <most-recently-configured-version>
-#        * <old-postinst> `abort-upgrade' <new version>
-#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
-#          <new-version>
-#        * <postinst> `abort-remove'
-#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
-#          <failed-install-package> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    configure)
-	# create a nextepc group and user
-	if ! getent passwd nextepc >/dev/null; then
-		adduser --system --disabled-password --disabled-login \
-			--home /var/run/nextepc --no-create-home \
-			--quiet --group nextepc
-	fi
-	for dir in /var/log/nextepc; do
-		if ! dpkg-statoverride --list "$dir" >/dev/null 2>&1; then
-			dpkg-statoverride --update --add nextepc nextepc 0755 "$dir"
-		fi
-	done
-    ;;
-
-    abort-upgrade|abort-remove|abort-deconfigure)
-    ;;
-
-    *)
-        echo "postinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-

debian/nextepc-core.postrm

@@ -1,44 +0,0 @@
-#!/bin/sh
-# postrm script for nextepc-core
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postrm> `remove'
-#        * <postrm> `purge'
-#        * <old-postrm> `upgrade' <new-version>
-#        * <new-postrm> `failed-upgrade' <old-version>
-#        * <new-postrm> `abort-install'
-#        * <new-postrm> `abort-install' <old-version>
-#        * <new-postrm> `abort-upgrade' <old-version>
-#        * <disappearer's-postrm> `disappear' <overwriter>
-#          <overwriter-version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    purge)
-        rm -f /var/log/nextepc/*.log || true
-        rmdir /var/log/nextepc || true
-        ;;
-
-    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
-        ;;
-
-    *)
-        echo "postrm called with unknown argument \`$1'" >&2
-        exit 1
-        ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-

debian/nextepc-hss.install

@@ -1,6 +0,0 @@
-usr/bin/nextepc-hssd
-etc/nextepc/freeDiameter/hss.conf
-etc/nextepc/freeDiameter/hss.cert.pem
-etc/nextepc/freeDiameter/hss.key.pem
-etc/nextepc/hss.conf
-support/systemd/nextepc-hssd.service lib/systemd/system

debian/nextepc-mme.install

@@ -1,6 +0,0 @@
-usr/bin/nextepc-mmed
-etc/nextepc/freeDiameter/mme.conf
-etc/nextepc/freeDiameter/mme.cert.pem
-etc/nextepc/freeDiameter/mme.key.pem
-etc/nextepc/mme.conf
-support/systemd/nextepc-mmed.service lib/systemd/system

debian/nextepc-pcrf.install

@@ -1,6 +0,0 @@
-usr/bin/nextepc-pcrfd
-etc/nextepc/freeDiameter/pcrf.conf
-etc/nextepc/freeDiameter/pcrf.cert.pem
-etc/nextepc/freeDiameter/pcrf.key.pem
-etc/nextepc/pcrf.conf
-support/systemd/nextepc-pcrfd.service lib/systemd/system

debian/nextepc-pgw.install

@@ -1,7 +0,0 @@
-usr/bin/nextepc-pgwd
-etc/nextepc/freeDiameter/pgw.conf
-etc/nextepc/freeDiameter/pgw.cert.pem
-etc/nextepc/freeDiameter/pgw.key.pem
-etc/nextepc/pgw.conf
-support/network/nextepc etc/network/interfaces.d
-support/systemd/nextepc-pgwd.service lib/systemd/system

debian/nextepc-pgw.postinst

@@ -1,47 +0,0 @@
-#!/bin/sh
-# postinst script for nextepc
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postinst> `configure' <most-recently-configured-version>
-#        * <old-postinst> `abort-upgrade' <new version>
-#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
-#          <new-version>
-#        * <postinst> `abort-remove'
-#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
-#          <failed-install-package> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    configure)
-    if ! grep "source-directory" /etc/network/interfaces | grep "/etc/network/interfaces.d" > /dev/null; then
-        echo "source-directory /etc/network/interfaces.d" >> /etc/network/interfaces
-    fi 
-    if ! grep "pgwtun" /proc/net/dev > /dev/null; then
-        ifup pgwtun
-    fi
-    ;;
-
-    abort-upgrade|abort-remove|abort-deconfigure)
-    ;;
-
-    *)
-        echo "postinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-

debian/nextepc-pgw.postrm

@@ -1,45 +0,0 @@
-#!/bin/sh
-# postrm script for nextepc-core
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postrm> `remove'
-#        * <postrm> `purge'
-#        * <old-postrm> `upgrade' <new-version>
-#        * <new-postrm> `failed-upgrade' <old-version>
-#        * <new-postrm> `abort-install'
-#        * <new-postrm> `abort-install' <old-version>
-#        * <new-postrm> `abort-upgrade' <old-version>
-#        * <disappearer's-postrm> `disappear' <overwriter>
-#          <overwriter-version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    purge)
-    if grep "pgwtun" /proc/net/dev > /dev/null; then
-        ip tuntap del name pgwtun mode tun
-    fi
-    ;;
-
-    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
-        ;;
-
-    *)
-        echo "postrm called with unknown argument \`$1'" >&2
-        exit 1
-        ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
-
-

debian/nextepc-sgw.install

@@ -1,3 +0,0 @@
-usr/bin/nextepc-sgwd
-etc/nextepc/sgw.conf
-support/systemd/nextepc-sgwd.service lib/systemd/system

debian/open5gs-amf.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-amfd
+configs/open5gs/amf.yaml etc/open5gs
+configs/systemd/open5gs-amfd.service lib/systemd/system

debian/open5gs-ausf.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-ausfd
+configs/open5gs/ausf.yaml etc/open5gs
+configs/systemd/open5gs-ausfd.service lib/systemd/system

debian/open5gs-common.dirs

@@ -0,0 +1 @@
+var/log/open5gs

debian/open5gs-common.install

@@ -0,0 +1,6 @@
+usr/lib/*/libogs*.so*
+usr/lib/*/libfd*.so*
+usr/lib/*/freeDiameter/*.fdx
+configs/freeDiameter/cacert.pem /etc/freeDiameter
+configs/logrotate/open5gs /etc/logrotate.d
+misc/db/open5gs-dbctl /usr/bin

debian/open5gs-common.postinst

@@ -0,0 +1,52 @@
+#!/bin/sh
+# postinst script for open5gs-common
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <postinst> `abort-remove'
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    configure)
+	# create a open5gs group and user
+	if ! getent passwd open5gs >/dev/null; then
+		adduser --system --disabled-password --disabled-login \
+			--home /var/run/open5gs --no-create-home \
+			--quiet --group open5gs
+	fi
+	for dir in /var/log/open5gs; do
+		if ! dpkg-statoverride --list "$dir" >/dev/null 2>&1; then
+			dpkg-statoverride --update --add open5gs open5gs 0755 "$dir"
+		fi
+	done
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+

debian/open5gs-common.postrm

@@ -0,0 +1,44 @@
+#!/bin/sh
+# postrm script for open5gs-common
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <overwriter>
+#          <overwriter-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    purge)
+        rm -f /var/log/open5gs/*.log || true
+        rmdir /var/log/open5gs || true
+        ;;
+
+    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+        ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+        ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+

debian/open5gs-hss.install

@@ -0,0 +1,4 @@
+usr/bin/open5gs-hssd
+configs/freeDiameter/hss.* etc/freeDiameter
+configs/open5gs/hss.yaml etc/open5gs
+configs/systemd/open5gs-hssd.service lib/systemd/system

debian/open5gs-mme.install

@@ -0,0 +1,4 @@
+usr/bin/open5gs-mmed
+configs/freeDiameter/mme.* etc/freeDiameter
+configs/open5gs/mme.yaml etc/open5gs
+configs/systemd/open5gs-mmed.service lib/systemd/system

debian/open5gs-nrf.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-nrfd
+configs/open5gs/nrf.yaml etc/open5gs
+configs/systemd/open5gs-nrfd.service lib/systemd/system

debian/open5gs-pcf.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-pcfd
+configs/open5gs/pcf.yaml etc/open5gs
+configs/systemd/open5gs-pcfd.service lib/systemd/system

debian/open5gs-pcrf.install

@@ -0,0 +1,4 @@
+usr/bin/open5gs-pcrfd
+configs/freeDiameter/pcrf.* etc/freeDiameter
+configs/open5gs/pcrf.yaml etc/open5gs
+configs/systemd/open5gs-pcrfd.service lib/systemd/system

debian/open5gs-sgwc.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-sgwcd
+configs/open5gs/sgwc.yaml etc/open5gs
+configs/systemd/open5gs-sgwcd.service lib/systemd/system

debian/open5gs-sgwu.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-sgwud
+configs/open5gs/sgwu.yaml etc/open5gs
+configs/systemd/open5gs-sgwud.service lib/systemd/system

debian/open5gs-smf.install

@@ -0,0 +1,4 @@
+usr/bin/open5gs-smfd
+configs/freeDiameter/smf.* etc/freeDiameter
+configs/open5gs/smf.yaml etc/open5gs
+configs/systemd/open5gs-smfd.service lib/systemd/system

debian/open5gs-udm.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-udmd
+configs/open5gs/udm.yaml etc/open5gs
+configs/systemd/open5gs-udmd.service lib/systemd/system

debian/open5gs-udr.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-udrd
+configs/open5gs/udr.yaml etc/open5gs
+configs/systemd/open5gs-udrd.service lib/systemd/system

debian/open5gs-upf.install

@@ -0,0 +1,4 @@
+usr/bin/open5gs-upfd
+configs/open5gs/upf.yaml etc/open5gs
+configs/systemd/99-open5gs.net* etc/systemd/network
+configs/systemd/open5gs-upfd.service lib/systemd/system

debian/open5gs-upf.postinst

@@ -0,0 +1,53 @@
+#!/bin/sh
+# postinst script for open5gs-pgw
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <postinst> `abort-remove'
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    configure)
+	if test "x`sysctl -n net.ipv6.conf.all.disable_ipv6`" = x1; then
+		echo "net.ipv6.conf.all.disable_ipv6=0" > /etc/sysctl.d/30-open5gs.conf
+		sysctl -p /etc/sysctl.d/30-open5gs.conf
+	fi
+	if test "x`systemctl is-enabled systemd-networkd`" = xdisabled; then
+		systemctl enable systemd-networkd
+	fi
+	deb-systemd-invoke restart systemd-networkd
+	if test -f /etc/sysctl.d/30-open5gs.conf && grep "ogstun" /proc/net/dev > /dev/null; then
+		echo "net.ipv6.conf.ogstun.disable_ipv6=0" > /etc/sysctl.d/30-open5gs.conf
+		sysctl -p /etc/sysctl.d/30-open5gs.conf
+	fi
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+

debian/open5gs-upf.postrm

@@ -0,0 +1,46 @@
+#!/bin/sh
+# postrm script for open5gs-pgw
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <overwriter>
+#          <overwriter-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    purge)
+    if grep "ogstun" /proc/net/dev > /dev/null; then
+        ip tuntap del name ogstun mode tun
+    fi
+	rm -f /etc/sysctl.d/30-open5gs.conf
+    ;;
+
+    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+        ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+        ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+

debian/rules

@@ -1,22 +1,17 @@
 #!/usr/bin/make -f
 
-# Uncomment this to turn on verbose mode.
 export DH_VERBOSE=1
-
-DEBIAN  := $(shell dpkg-parsechangelog | grep ^Version: | cut -d' ' -f2)
-DEBVERS := $(shell echo '$(DEBIAN)' | cut -d- -f1)
-VERSION := $(shell echo '$(DEBVERS)' | sed -e 's/[+-].*//' -e 's/~//g')
-
-# This has to be exported to make some magic below work.
-#export DH_OPTIONS
 export DEB_BUILD_MAINT_OPTIONS = hardening=+all
 
+export LC_ALL = C.UTF-8
+
+include /usr/share/dpkg/default.mk
+
 %:
-	dh $@ --with autoreconf --with systemd
+	dh $@ --buildsystem=meson
+
+override_dh_install:
+	dh_install --sourcedir=obj-$(DEB_HOST_GNU_TYPE)
 
 override_dh_auto_test:
-	sctp_exclude_list=; \
-	if ! cat /proc/net/protocols | grep SCTP > /dev/null; then \
-		sctp_exclude_list="-x testsctp"; \
-	fi; \
-	lib/core/test/testcore $$sctp_exclude_list || exit; \
+	cd obj-$(DEB_HOST_GNU_TYPE) && meson test -v --suite unit

docker/README.md

@@ -0,0 +1,93 @@
+Docker running example
+===========================================
+* Build Image
+  $ docker-compose build
+
+* Development 
+  $ docker-compose run dev
+
+* Runtime
+  $ docker-compose \
+    -f docker-compose.yml -f docker-compose.run.yml run run
+
+* Test
+  $ docker-compose \
+    -f docker-compose.yml -f docker-compose.test.yml run test
+
+* Test(ubuntu:artful)
+  $ TAG=eoan docker-compose build
+  $ TAG=eoan docker-compose \
+    -f docker-compose.yml -f docker-compose.test.yml run test
+
+* Development(fedora:latest)
+  $ DIST=fedora docker-compose build
+  $ DIST=fedora docker-compose run dev
+
+* Runtime(debian:jessie)
+  $ DIST=debian TAG=stretch docker-compose build
+  $ DIST=debian TAG=stretch docker-compose 
+    -f docker-compose.yml -f docker-compose.run.yml run run
+
+* All Test with All Environment
+  $ ./check.sh
+
+* Run WebUI 
+  $ docker-compose up -d
+
+For OpenSUSE Build Service Release
+===========================================
+
+* Build Package
+  $ ./build-aux/git-version-gen . > .tarball-version
+  $ dpkg-source -b .
+  $ rm -f .tarball-version
+
+* Get Release Key
+  $ wget http://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/xUbuntu_18.04/Release.key
+  $ sudo apt-key add Release.key
+
+* Setup Repository
+  $ sudo sh -c "echo 'deb https://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/xUbuntu_18.04/ ./' > /etc/apt/sources.list.d/open5gs-latest.list"
+  $ sudo apt-get update
+  
+For Launchpad Release
+===========================================
+
+* Run Docker
+  $ docker-compose run dev
+
+* Setup Debian Environment
+export DEBFULLNAME='Sukchan Lee'
+export DEBEMAIL='acetcom@gmail.com'
+
+* Transfer GPG key
+  $ gpg --export-secret-keys --armor --output private.asc
+  $ gpg --import private.asc
+  $ gpg --export > public.asc
+  $ gpg --import public.asc
+
+* Version Change
+  $ vi meson.build
+  $ ./misc/git-version-gen . > .tarball-version 2>/dev/null
+
+* Upload OpenBuildService
+  $ dch -i
+  $ meson subprojects download freeDiameter
+  $ debuild -S -uc -us -d
+  $ osc co home:acetcom:open5gs latest
+  $ cd home\:acetcom\:open5gs/latest/
+  $ cp ~/git/open5gs_1.0.0.* .
+  $ osc ci -m "Update it"
+
+* Upload LaunchPad
+  $ dch -i
+  $ meson subprojects download freeDiameter
+  $ debuild -S -d
+  $ dput ppa:open5gs/latest *.source.changes
+
+* Tagging
+  $ git tag v1.x.x -a
+
+* Build package
+  $ dpkg-buildpackage -d
+

docker/build/Dockerfile

@@ -0,0 +1,19 @@
+ARG dist=ubuntu
+ARG tag=latest
+ARG username=acetcom
+FROM ${username}/${dist}-${tag}-open5gs-base
+
+MAINTAINER Sukchan Lee <acetcom@gmail.com>
+
+WORKDIR /root
+COPY setup.sh /root
+
+ARG USER=open5gs
+ARG REPO=open5gs
+ARG BRANCH=master
+RUN	git clone https://github.com/$USER/$REPO
+ADD https://api.github.com/repos/$USER/$REPO/git/refs/heads/$BRANCH /root/open5gs-ver.json
+
+RUN	cd $REPO && \
+	git fetch && git checkout -f -B $BRANCH origin/$BRANCH && \
+    meson build && ninja -C build install

docker/build/setup.sh

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+if ! grep "ogstun" /proc/net/dev > /dev/null; then
+    ip tuntap add name ogstun mode tun
+fi
+ip addr del 10.45.0.1/16 dev ogstun 2> /dev/null
+ip addr add 10.45.0.1/16 dev ogstun
+ip addr del cafe::1/64 dev ogstun 2> /dev/null
+ip addr add cafe::1/64 dev ogstun
+ip link set ogstun up