Release v2.6.1

[ETSI TS 128 552 V16.9.0](https://www.etsi.org/deliver/etsi_ts/128500_128599/128552/16.09.00_60/ts_128552v160900p.pdf)

5.2.2 Registration procedure related measurements

SNSSAI labels are not provided.

- Number of registration requests received by the AMF is
exposed for each registration type.
```
fivegs_amffunction_rm_reginitreq 1
fivegs_amffunction_rm_regmobreq 0
fivegs_amffunction_rm_regperiodreq 0
fivegs_amffunction_rm_regemergreq 0
```

- Number of successful initial registrations at the AMF is
exposed for each registration type.
```
fivegs_amffunction_rm_reginitsucc 1
fivegs_amffunction_rm_regmobsucc 0
fivegs_amffunction_rm_regperiodsucc 0
fivegs_amffunction_rm_regemergsucc 0
```

- The existing counter of failed registrations at the AMF
is exposed separately for each registration type.
```
fivegs_amffunction_rm_reginitfail
fivegs_amffunction_rm_regmobfail
fivegs_amffunction_rm_regperiodfail
fivegs_amffunction_rm_regemergfail
```

5.2.5.2 Measurements for 5G paging

Number of 5G paging procedures initiated at the AMF:
```
fivegs_amffunction_mm_paging5greq 1
```
Number of successful 5G paging procedures initiated at the AMF:
```
fivegs_amffunction_mm_paging5gsucc 1
```

5.2.11 Authentication procedure related measurements

Number of authentication requests:
```
fivegs_amffunction_amf_authreq 2
```
Number of authentication rejections:
```
fivegs_amffunction_amf_authreject 1
```
Number of failed authentications due to parameter error:
```
fivegs_amffunction_amf_authfail{cause="21"} 1
```

5.2.8 UE Configuration Update procedure related measurements

Number of UE Configuration Update commands requested by the AMF:
```
fivegs_amffunction_mm_confupdate 2
```
Number of UE Configuration Update complete messages received by the AMF:
```
fivegs_amffunction_mm_confupdatesucc 1
```

.clang-tidy

@@ -0,0 +1,69 @@
+---
+Checks: '*,
+  -altera-id-dependent-backward-branch,
+  -altera-struct-pack-align,
+  -altera-unroll-loops,
+  -android-cloexec-*,
+  -bugprone-branch-clone,
+  -bugprone-easily-swappable-parameters,
+  -bugprone-macro-parentheses,
+  -bugprone-reserved-identifier,
+  -bugprone-sizeof-expression,
+  -cert-dcl37-c,
+  -cert-dcl51-cpp,
+  -cert-err33-c,
+  -cert-err34-c,
+  -clang-analyzer-optin.performance.Padding,
+  -clang-analyzer-security.insecureAPI.bcmp,
+  -clang-analyzer-security.insecureAPI.bcopy,
+  -clang-analyzer-security.insecureAPI.bzero,
+  -clang-diagnostic-error,
+  -clang-diagnostic-typedef-redefinition,
+  -clang-diagnostic-unknown-warning-option,
+  -concurrency-mt-unsafe,
+  -cppcoreguidelines-avoid-magic-numbers,
+  -cppcoreguidelines-avoid-non-const-global-variables,
+  -cppcoreguidelines-init-variables,
+  -google-readability-braces-around-statements,
+  -google-readability-casting,
+  -google-readability-function-size,
+  -google-readability-todo,
+  -hicpp-braces-around-statements,
+  -hicpp-function-size,
+  -hicpp-multiway-paths-covered,
+  -llvm-else-after-return,
+  -llvm-header-guard,
+  -llvm-include-order,
+  -llvmlibc-restrict-system-libc-headers,
+  -misc-no-recursion,
+  -misc-unused-parameters,
+  -performance-no-int-to-ptr,
+  -readability-avoid-const-params-in-decls,
+  -readability-braces-around-statements,
+  -readability-duplicate-include,
+  -readability-else-after-return,
+  -readability-function-cognitive-complexity,
+  -readability-function-size,
+  -readability-identifier-length,
+  -readability-isolate-declaration,
+  -readability-magic-numbers,
+  -readability-non-const-parameter,
+  -readability-redundant-control-flow,
+  -readability-redundant-declaration,
+  -readability-suspicious-call-argument,
+
+
+  -bugprone-implicit-widening-of-multiplication-result,
+  -bugprone-narrowing-conversions,
+  -cert-exp42-c,
+  -cert-flp37-c,
+  -clang-analyzer-core.NullDereference,
+  -clang-analyzer-deadcode.DeadStores,
+  -clang-analyzer-security.insecureAPI.strcpy,
+  -cppcoreguidelines-interfaces-global-init,
+  -cppcoreguidelines-narrowing-conversions,
+  -hicpp-signed-bitwise,
+  '
+
+WarningsAsErrors: false
+HeaderFilterRegex: '(.*\.h)'

.dockerignore

@@ -0,0 +1,10 @@
+**/*.md
+**/docker-compose*.yml
+**/docker-compose*.yaml
+**/Dockerfile*
+.git
+.dockerignore
+.cache
+.gitignore
+.github
+build

.github/FUNDING.yml

@@ -0,0 +1,13 @@
+# These are supported funding model platforms
+
+#github: [acetcom, open5gs]
+github: acetcom
+#patreon: # Replace with a single Patreon username
+open_collective: open5gs
+#ko_fi: # Replace with a single Ko-fi username
+#tidelift: # Replace with a single Tidelift platform-name/package-name e.g., npm/babel
+#community_bridge: # Replace with a single Community Bridge project-name e.g., cloud-foundry
+#liberapay: # Replace with a single Liberapay username
+#issuehunt: # Replace with a single IssueHunt username
+#otechie: # Replace with a single Otechie username
+#custom: # Replace with up to 4 custom sponsorship URLs e.g., ['link1', 'link2']

.github/ISSUE_TEMPLATE/bugreport.yaml

@@ -0,0 +1,58 @@
+name: Bug Report
+description: File a bug report or issue
+title: "[Bug]: "
+labels: ['triage']
+assignees: []
+body:
+  - type: markdown
+    attributes:
+      value: > 
+        **Please note**
+        
+        This form should only be used if _you can reporoduce_ the bug the in the *current* release of
+        Open5GS Stack. For installation, configuration or other help with Open5GS please
+        use our [discussion forum](https://github.com/open5gs/open5gs/discussions).
+        
+        **This form is not for support requests.**
+  - type: input
+    attributes:
+      label: Open5GS Release, Revision, or Tag
+      description: Please check if your issue has been resolved in the latest release.
+      placeholder: v2.6.0
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Steps to reproduce
+      description: >
+        Please describe in detail the steps needed to reproduce this bug. These steps
+        should reproduce the issue on the most current release of Open5GS. Be sure to
+        include configuration and platform details.
+        Please include logs from the relevant daemons as well as any relevant packet captures.
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Logs
+      description: Provide any relevant captured logs for the issue
+      render: shell
+  - type: textarea
+    attributes:
+      label: Expected behaviour
+      description: What did you expect to happen?
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Observed Behaviour
+      description: What's the observed behaviour?
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: eNodeB/gNodeB
+      description: If using an eNB or gNB, please identify which vendor/version
+  - type: input
+    attributes:
+      label: UE Models and versions
+      description: Which UE hardware model and version or simulator version are you using?

.github/ISSUE_TEMPLATE/config.yaml

@@ -0,0 +1,9 @@
+blank_issues_enabled: false
+contact_links:
+        - name: Open5GS Contribution Guide
+          url: https://github.com/open5gs/open5gs/wiki/Contribution-guide
+          about: Contribution guide detailing how you can help the project
+        - name: Project Sponsorship
+          url: https://github.com/sponsors/acetcom
+          name: Support the Open5GS developer using GitHub sponsorship
+

.github/ISSUE_TEMPLATE/feature_request.yaml

@@ -0,0 +1,48 @@
+name: Feature request
+description: Propose an enhancement to Open5GS
+labels: ['Enhancement', 'triage']
+body:
+  - type: markdown
+    attributes:
+      value: >
+        ## Feature request
+        Please submit your feature request using the form. If your proposal is not sufficiently
+        well formed, we may request further clarification and expansion. If you're unsure about
+        how to formulate your request, please start a [discussion instead](https://github.com/open5gs/open5gs/dicsussions/).
+
+  - type: input
+    attributes:
+      label: Open5GS Release, Revision, or Tag
+      placeholder: v2.6.0
+    validations:
+      required: true
+
+  - type: input
+    attributes:
+      label: Components and subsystems
+      description: Which subsystems and components would this feature be relevant to?
+    validations:
+      required: true
+
+  - type: textarea
+    attributes:
+      label: Proposed functionality
+      description: >
+        Provide a detailed description of the feature or behaviour you are proposing. Please include any
+        Please include any relevant 3GPP standards and references and include any specific changes to
+        current protocols, processing pipelines, DIAMETER requests/responses, and interfaces. The more detail
+        you provide, the greater the chance your proposal has of being discussed.
+
+        If your feature request does not include anything actionable or sufficient details, you may be asked
+        to provide further clarification or your request may be rejected.
+    validations:
+      required: true
+
+  - type: textarea
+    attributes:
+      label: External dependencies
+      description: >
+        Please detail any new dependencies or implementations that this feature might introduce. e.g. Does the 
+        proposal require the installation of additional packages? Are there further external nodes which may be
+        required for integration testing? (Not all feature requests will introduce new dependencies)
+

.github/stale.yml

@@ -0,0 +1,61 @@
+# Configuration for probot-stale - https://github.com/probot/stale
+
+# Number of days of inactivity before an Issue or Pull Request becomes stale
+daysUntilStale: 180
+
+# Number of days of inactivity before an Issue or Pull Request with the stale label is closed.
+# Set to false to disable. If disabled, issues still need to be closed manually, but will remain marked as stale.
+daysUntilClose: 7
+
+# Only issues or pull requests with all of these labels are check if stale. Defaults to `[]` (disabled)
+onlyLabels: []
+
+# Issues or Pull Requests with these labels will never be considered stale. Set to `[]` to disable
+exemptLabels:
+  - pinned
+  - security
+  - "[Status] Maybe Later"
+
+# Set to true to ignore issues in a project (defaults to false)
+exemptProjects: false
+
+# Set to true to ignore issues in a milestone (defaults to false)
+exemptMilestones: false
+
+# Set to true to ignore issues with an assignee (defaults to false)
+exemptAssignees: false
+
+# Label to use when marking as stale
+staleLabel: wontfix
+
+# Comment to post when marking as stale. Set to `false` to disable
+markComment: >
+  This issue/PR has been automatically marked as stale because it has not had
+  recent activity for 180 days. It will be closed if no further activity
+  occurs in 7 dayss. Thank you for your contributions!
+
+# Comment to post when removing the stale label.
+# unmarkComment: >
+#   Your comment here.
+
+# Comment to post when closing a stale Issue or Pull Request.
+# closeComment: >
+#   Your comment here.
+
+# Limit the number of actions per hour, from 1-30. Default is 30
+limitPerRun: 30
+
+# Limit to only `issues` or `pulls`
+# only: issues
+
+# Optionally, specify configuration settings that are specific to just 'issues' or 'pulls':
+# pulls:
+#   daysUntilStale: 30
+#   markComment: >
+#     This pull request has been automatically marked as stale because it has not had
+#     recent activity. It will be closed if no further activity occurs. Thank you
+#     for your contributions.
+
+# issues:
+#   exemptLabels:
+#     - confirmed

.github/workflows/meson-ci.yml

@@ -0,0 +1,78 @@
+name: Meson Continuous Integration
+on: [push, pull_request]
+
+jobs:
+  macos-latest:
+    name: Build and Test on MacOS Latest
+    runs-on: macos-latest
+    steps:
+#    - name: Install MongoDB with Package Manager
+#      run: |
+#          brew tap mongodb/brew
+#          brew install mongodb-community
+#          brew services start mongodb-community
+    - name: Create the TUN device with the interface name `ogstun`.
+      run: |
+          sudo ifconfig lo0 alias 127.0.0.2 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.3 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.4 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.5 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.5 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.6 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.7 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.8 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.9 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.10 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.11 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.12 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.13 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.14 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.15 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.16 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.17 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.18 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.19 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.0.20 netmask 255.255.255.255
+          sudo ifconfig lo0 alias 127.0.1.10 netmask 255.255.255.255
+    - name: Install the dependencies for building the source code.
+      run: brew install mongo-c-driver libidn libmicrohttpd nghttp2 bison libusrsctp libtins talloc meson
+    - name: Check out repository code
+      uses: actions/checkout@main
+    - name: Setup Meson Build
+      run: PATH="/usr/local/opt/bison/bin:$PATH" PKG_CONFIG_PATH="/usr/local/opt/openssl/lib/pkgconfig:$PKG_CONFIG_PATH" meson setup build
+      env:
+        CC: gcc
+    - name : Build Open5GS
+      run: ninja -C build
+    - name: Test Open5GS
+      run: sudo meson test -C build -v crypt unit
+
+  ubuntu-latest:
+    name: Build and Test on Ubuntu Latest
+    runs-on: ubuntu-latest
+    services:
+      mongodb:
+        image: mongo
+        ports:
+          - 27017:27017
+    steps:
+    - name: Create the TUN device with the interface name `ogstun`.
+      run: |
+          sudo ip tuntap add name ogstun mode tun
+          sudo ip addr add 10.45.0.1/16 dev ogstun
+          sudo ip addr add 2001:db8:cafe::1/48 dev ogstun
+          sudo ip link set ogstun up
+    - name: Install the dependencies for building the source code.
+      run: |
+          sudo apt update
+          sudo apt install python3-pip python3-setuptools python3-wheel ninja-build build-essential flex bison git libsctp-dev libgnutls28-dev libgcrypt-dev libssl-dev libidn11-dev libmongoc-dev libbson-dev libyaml-dev libnghttp2-dev libmicrohttpd-dev libcurl4-gnutls-dev libnghttp2-dev libtins-dev libtalloc-dev meson
+    - name: Check out repository code
+      uses: actions/checkout@main
+    - name: Setup Meson Build
+      run: meson setup build
+      env:
+        CC: gcc
+    - name : Build Open5GS
+      run: ninja -C build
+    - name: Test Open5GS
+      run: meson test -C build -v

.gitignore

@@ -1,70 +1,7 @@
-# compiler output
-*.o
-*.lo
-*.a
-*.la
-*.conf
-.deps
-.dirstamp
-.libs
+# This directory is fetched during first build and is present in this directory
+subprojects/freeDiameter
+subprojects/libtins
+subprojects/prometheus-client-c
+subprojects/usrsctp
 
-# generated files
-lib/freeDiameter-*/build-aux/*
-lib/freeDiameter-*/config.status
-lib/freeDiameter-*/m4/*.m4
-lib/freeDiameter-*/!m4/ax_*.m4
-lib/freeDiameter-*/libfdcore/fdd.tab.[chy]
-lib/freeDiameter-*/libfdcore/lex.fdd.[cl]
-lib/freeDiameter-*/include/freeDiameter/version.h
-lib/freeDiameter-*/include/freeDiameter/config.h.in*
-lib/freeDiameter-*/include/freeDiameter/config.h
-lib/freeDiameter-*/include/freeDiameter/freeDiameter-host.h
-support/systemd/nextepc-*.service
-support/logrotate/nextepc
-
-# autotools
-stamp-h1
-config.h
-lib/base/nextepc-config.h
-lib/base/nextepc-config.h.in*
-config.log
-config.status
-configure
-aclocal.m4
-libtool
-autom4te.cache
-build/*
-!build/git-version-gen
-!build/osc-upload.sh
-!build/dput-upload.sh
-Makefile
-Makefile.in
-m4/*.m4
-!m4/ax_*.m4
-
-.tarball-version
-.version
-
-# autotest
-tests/package.m4
-tests/atconfig
-tests/testsuite
-tests/testsuite.dir/
-tests/testsuite.log
-
-# executables
-tests/testunit
-tests/testsimple
-tests/testcomplex
-tests/testvolte
-tests/testcsfb
-nextepc-mmed
-nextepc-pcrfd
-nextepc-pgwd
-nextepc-sgwd
-nextepc-epcd
-nextepc-hssd
-
-# webui
-webui/.next/
-webui/node_modules/
+webui/.next

.gitmodules

@@ -1,3 +0,0 @@
-[submodule "lib/ogslib"]
-	path = lib/ogslib
-	url = https://github.com/open5gs/ogslib

Makefile.am

@@ -1,62 +0,0 @@
-# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
-
-# This file is part of Open5GS.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Affero General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-ACLOCAL_AMFLAGS = -I m4
-EXTRA_DIST = build/git-version-gen .version README.md LICENSE
-
-SUBDIRS = lib src support tests
-
-bin_PROGRAMS = nextepc-mmed nextepc-hssd nextepc-sgwd nextepc-pgwd nextepc-pcrfd nextepc-epcd
-
-dist_nextepc_mmed_SOURCES = main.c
-nextepc_mmed_LDADD = $(top_srcdir)/src/libmme.la
-
-dist_nextepc_hssd_SOURCES = main.c
-nextepc_hssd_LDADD = $(top_srcdir)/src/libhss.la
-
-dist_nextepc_sgwd_SOURCES = main.c
-nextepc_sgwd_LDADD = $(top_srcdir)/src/libsgw.la
-
-dist_nextepc_pgwd_SOURCES = main.c
-nextepc_pgwd_LDADD = $(top_srcdir)/src/libpgw.la
-
-dist_nextepc_pcrfd_SOURCES = main.c
-nextepc_pcrfd_LDADD = $(top_srcdir)/src/libpcrf.la
-
-dist_nextepc_epcd_SOURCES = main.c
-nextepc_epcd_LDADD = $(top_srcdir)/src/libepc.la
-
-AM_CPPFLAGS = \
-	@OGSCORE_CFLAGS@ \
-    -I$(top_srcdir)/lib \
-    -I$(top_srcdir)/src \
-	$(NULL)
-
-install-data-hook:
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/log/nextepc
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/run/nextepc-mmed
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/run/nextepc-sgwd
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/run/nextepc-pgwd
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/run/nextepc-pcrfd
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/run/nextepc-hssd
-	$(MKDIR_P) $(DESTDIR)/$(localstatedir)/run/nextepc-epcd
-
-BUILT_SOURCES = $(top_srcdir)/.version
-$(top_srcdir)/.version:
-	echo $(VERSION) > $@-t && mv $@-t $@
-dist-hook:
-	echo $(VERSION) > $(distdir)/.tarball-version

README.md

@@ -1,26 +1,30 @@
-## Documentation
+<p align="center"><a href="https://open5gs.org" target="_blank" rel="noopener noreferrer"><img width="100" src="https://open5gs.org/assets/img/open5gs-logo-only.png" alt="Open5GS logo"></a></p>
 
-If you don't understand something about NextEPC, the [https://open5gs.org/nextepc/docs/](https://open5gs.org/nextepc/docs/) is a great place to look for answers.
+## Getting Started
 
-## Support
+Please follow the [documentation](https://open5gs.org/open5gs/docs/) at [open5gs.org](https://open5gs.org/)!
 
-Problem with NextEPC can be filed as [issues](https://github.com/open5gs/nextepc/issues) in this repository. 
+## Sponsors
 
-Discussions related to this project are happening on the [nextepc@lists.osmocom.org](mailto:nextepc@lists.osmocom.org) mailing list, please see <https://lists.osmocom.org/mailman/listinfo/nextepc> for subscription options and the list archive.
+If you find Open5GS useful for work, please consider supporting this Open Source project by [Becoming a sponsor](https://github.com/sponsors/acetcom). To manage the funding transactions transparently, you can donate through [OpenCollective](https://opencollective.com/open5gs).
 
-Voice and text chat available in NextEPC's [Discord](https://discordapp.com/) workspace. Use [this link](https://discord.gg/GreNkuc) to get started.
+<p align="center">
+  <a target="_blank" href="https://open5gs.org/#sponsors">
+      <img alt="sponsors" src="https://open5gs.org/assets/img/sponsors.svg">
+  </a>
+</p>
+
+## Community
+
+- Problem with Open5GS can be filed as [issues](https://github.com/open5gs/open5gs/issues) in this repository.
+- Other topics related to this project are happening on the [discussions](https://github.com/open5gs/open5gs/discussions).
+- Voice and text chat are available in Open5GS's [Discord](https://discordapp.com/) workspace. Use [this link](https://discord.gg/GreNkuc) to get started.
 
 ## Contributing
 
-NextEPC is a pure/classic FOSS project, open to contributions from anyone.
-
-[Pull requests](https://github.com/open5gs/nextepc/pulls) are always welcome, and I appreciates any help the community can give to help make NextEPC better.
-
-Do you want to be a committer? Please [send me an email](mailto:acetcom@gmail.com). You will be added as a committer to this project. However, if someone consistently causes difficulties with these source repositories due to poor behavior or other serious problems then commit access may be revoked.
+If you're contributing through a pull request to Open5GS project on GitHub, please read the [Contributor License Agreement](https://open5gs.org/open5gs/cla/) in advance.
 
 ## License
 
-NextEPC source files are made available under the terms of the GNU Affero General Public License (GNU AGPLv3).
-
-When you contribute code for NextEPC, the same license applies.
-
+- Open5GS Open Source files are made available under the terms of the GNU Affero General Public License ([GNU AGPL v3.0](https://www.gnu.org/licenses/agpl-3.0.html)).
+- [Commercial licenses](https://open5gs.org/open5gs/support/) are also available from [NeoPlane](https://neoplane.io/)

build/git-version-gen

@@ -1,227 +0,0 @@
-#!/bin/sh
-# Print a version string.
-scriptversion=2017-09-13.06; # UTC
-
-# Copyright (C) 2007-2017 Free Software Foundation, Inc.
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-# This script is derived from GIT-VERSION-GEN from GIT: https://git-scm.com/.
-# It may be run two ways:
-# - from a git repository in which the "git describe" command below
-#   produces useful output (thus requiring at least one signed tag)
-# - from a non-git-repo directory containing a .tarball-version file, which
-#   presumes this script is invoked like "./git-version-gen .tarball-version".
-
-# In order to use intra-version strings in your project, you will need two
-# separate generated version string files:
-#
-# .tarball-version - present only in a distribution tarball, and not in
-#   a checked-out repository.  Created with contents that were learned at
-#   the last time autoconf was run, and used by git-version-gen.  Must not
-#   be present in either $(srcdir) or $(builddir) for git-version-gen to
-#   give accurate answers during normal development with a checked out tree,
-#   but must be present in a tarball when there is no version control system.
-#   Therefore, it cannot be used in any dependencies.  GNUmakefile has
-#   hooks to force a reconfigure at distribution time to get the value
-#   correct, without penalizing normal development with extra reconfigures.
-#
-# .version - present in a checked-out repository and in a distribution
-#   tarball.  Usable in dependencies, particularly for files that don't
-#   want to depend on config.h but do want to track version changes.
-#   Delete this file prior to any autoconf run where you want to rebuild
-#   files to pick up a version string change; and leave it stale to
-#   minimize rebuild time after unrelated changes to configure sources.
-#
-# As with any generated file in a VC'd directory, you should add
-# /.version to .gitignore, so that you don't accidentally commit it.
-# .tarball-version is never generated in a VC'd directory, so needn't
-# be listed there.
-#
-# Use the following line in your configure.ac, so that $(VERSION) will
-# automatically be up-to-date each time configure is run (and note that
-# since configure.ac no longer includes a version string, Makefile rules
-# should not depend on configure.ac for version updates).
-#
-# AC_INIT([GNU project],
-#         m4_esyscmd([build-aux/git-version-gen .tarball-version]),
-#         [bug-project@example])
-#
-# Then use the following lines in your Makefile.am, so that .version
-# will be present for dependencies, and so that .version and
-# .tarball-version will exist in distribution tarballs.
-#
-# EXTRA_DIST = $(top_srcdir)/.version
-# BUILT_SOURCES = $(top_srcdir)/.version
-# $(top_srcdir)/.version:
-#	echo $(VERSION) > $@-t && mv $@-t $@
-# dist-hook:
-#	echo $(VERSION) > $(distdir)/.tarball-version
-
-
-me=$0
-
-version="git-version-gen $scriptversion
-
-Copyright 2011 Free Software Foundation, Inc.
-There is NO warranty.  You may redistribute this software
-under the terms of the GNU General Public License.
-For more information about these matters, see the files named COPYING."
-
-usage="\
-Usage: $me [OPTION]... \$srcdir/.tarball-version [TAG-NORMALIZATION-SED-SCRIPT]
-Print a version string.
-
-Options:
-
-   --prefix PREFIX    prefix of git tags (default 'v')
-   --fallback VERSION
-                      fallback version to use if \"git --version\" fails
-
-   --help             display this help and exit
-   --version          output version information and exit
-
-Running without arguments will suffice in most cases."
-
-prefix=v
-fallback=
-
-while test $# -gt 0; do
-  case $1 in
-    --help) echo "$usage"; exit 0;;
-    --version) echo "$version"; exit 0;;
-    --prefix) shift; prefix=${1?};;
-    --fallback) shift; fallback=${1?};;
-    -*)
-      echo "$0: Unknown option '$1'." >&2
-      echo "$0: Try '--help' for more information." >&2
-      exit 1;;
-    *)
-      if test "x$tarball_version_file" = x; then
-        tarball_version_file="$1"
-      elif test "x$tag_sed_script" = x; then
-        tag_sed_script="$1"
-      else
-        echo "$0: extra non-option argument '$1'." >&2
-        exit 1
-      fi;;
-  esac
-  shift
-done
-
-if test "x$tarball_version_file" = x; then
-    echo "$usage"
-    exit 1
-fi
-
-tag_sed_script="${tag_sed_script:-s/x/x/}"
-
-nl='
-'
-
-# Avoid meddling by environment variable of the same name.
-v=
-v_from_git=
-
-# First see if there is a tarball-only version file.
-# then try "git describe", then default.
-if test -f $tarball_version_file
-then
-    v=`cat $tarball_version_file` || v=
-    case $v in
-        *$nl*) v= ;; # reject multi-line output
-        [0-9]*) ;;
-        *) v= ;;
-    esac
-    test "x$v" = x \
-        && echo "$0: WARNING: $tarball_version_file is missing or damaged" 1>&2
-fi
-
-if test "x$v" != x
-then
-    : # use $v
-# Otherwise, if there is at least one git commit involving the working
-# directory, and "git describe" output looks sensible, use that to
-# derive a version string.
-elif test "`git log -1 --pretty=format:x . 2>&1`" = x \
-    && v=`git describe --abbrev=4 --match="$prefix*" HEAD 2>/dev/null \
-          || git describe --abbrev=4 HEAD 2>/dev/null` \
-    && v=`printf '%s\n' "$v" | sed "$tag_sed_script"` \
-    && case $v in
-         $prefix[0-9]*) ;;
-         *) (exit 1) ;;
-       esac
-then
-    # Is this a new git that lists number of commits since the last
-    # tag or the previous older version that did not?
-    #   Newer: v6.10-77-g0f8faeb
-    #   Older: v6.10-g0f8faeb
-    vprefix=`expr "X$v" : 'X\(.*\)-g[^-]*$'` || vprefix=$v
-    case $vprefix in
-        *-*) : git describe is probably okay three part flavor ;;
-        *)
-            : git describe is older two part flavor
-            # Recreate the number of commits and rewrite such that the
-            # result is the same as if we were using the newer version
-            # of git describe.
-            vtag=`echo "$v" | sed 's/-.*//'`
-            commit_list=`git rev-list "$vtag"..HEAD 2>/dev/null` \
-                || { commit_list=failed;
-                     echo "$0: WARNING: git rev-list failed" 1>&2; }
-            numcommits=`echo "$commit_list" | wc -l`
-            v=`echo "$v" | sed "s/\(.*\)-\(.*\)/\1-$numcommits-\2/"`;
-            test "$commit_list" = failed && v=UNKNOWN
-            ;;
-    esac
-
-    # Change the penultimate "-" to ".", for version-comparing tools.
-    # Remove the "g" to save a byte.
-    v=`echo "$v" | sed 's/-\([^-]*\)-g\([^-]*\)$/.\1-\2/'`;
-    v_from_git=1
-elif test "x$fallback" = x || git --version >/dev/null 2>&1; then
-    v=UNKNOWN
-else
-    v=$fallback
-fi
-
-v=`echo "$v" |sed "s/^$prefix//"`
-
-# Test whether to append the "-dirty" suffix only if the version
-# string we're using came from git.  I.e., skip the test if it's "UNKNOWN"
-# or if it came from .tarball-version.
-if test "x$v_from_git" != x; then
-  # Don't declare a version "dirty" merely because a timestamp has changed.
-  git update-index --refresh > /dev/null 2>&1
-
-  dirty=`exec 2>/dev/null;git diff-index --name-only HEAD` || dirty=
-  case "$dirty" in
-      '') ;;
-      *) # Append the suffix only if there isn't one already.
-          case $v in
-            *-dirty) ;;
-            *) v="$v-dirty" ;;
-          esac ;;
-  esac
-fi
-
-# Omit the trailing newline, so that m4_esyscmd can use the result directly.
-printf %s "$v"
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:

configs/310014.yaml.in

@@ -0,0 +1,259 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+sbi:
+    server:
+      no_tls: true
+      cacert: @build_configs_dir@/open5gs/tls/ca.crt
+      key: @build_configs_dir@/open5gs/tls/testserver.key
+      cert: @build_configs_dir@/open5gs/tls/testserver.crt
+    client:
+      no_tls: true
+      cacert: @build_configs_dir@/open5gs/tls/ca.crt
+      key: @build_configs_dir@/open5gs/tls/testclient.key
+      cert: @build_configs_dir@/open5gs/tls/testclient.crt
+
+parameter:
+#    no_nrf: true
+#    no_scp: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+#    use_mongodb_change_stream: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 310
+        mnc: 014
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 310
+        mnc: 014
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:db8:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 310
+          mnc: 014
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 310
+          mnc: 014
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 310
+          mnc: 014
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:db8:cafe::1/48
+    metrics:
+      - addr: 127.0.0.7
+        port: 9090
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+scp:
+    sbi:
+      - addr: 127.0.1.10
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+    metrics:
+      - addr: 127.0.0.13
+        port: 9090
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: 127.0.0.10
+        port: 7777
+        s_nssai:
+          sst: 1
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777
+
+time:
+  t3512:
+    value: 540     # 9 mintues * 60 = 540 seconds

configs/csfb.yaml.in

@@ -0,0 +1,288 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+sbi:
+    server:
+      no_tls: true
+      cacert: @build_configs_dir@/open5gs/tls/ca.crt
+      key: @build_configs_dir@/open5gs/tls/testserver.key
+      cert: @build_configs_dir@/open5gs/tls/testserver.crt
+    client:
+      no_tls: true
+      cacert: @build_configs_dir@/open5gs/tls/ca.crt
+      key: @build_configs_dir@/open5gs/tls/testclient.key
+      cert: @build_configs_dir@/open5gs/tls/testclient.crt
+
+parameter:
+#    no_nrf: true
+#    no_scp: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+#    use_mongodb_change_stream: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    sgsap:
+      - addr: 127.0.0.2
+        map:
+          tai:
+            plmn_id:
+              mcc: 999
+              mnc: 70
+            tac: 7
+          lai:
+            plmn_id:
+              mcc: 999
+              mnc: 70
+            lac: 2342
+        map:
+          tai:
+            plmn_id:
+              mcc: 724
+              mnc: 21
+            tac: 12345
+          lai:
+            plmn_id:
+              mcc: 724
+              mnc: 21
+            lac: 51544
+    gummei:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        mme_gid: 2
+        mme_code: 1
+      - plmn_id:
+          mcc: 724
+          mnc: 21
+        mme_gid: 2
+        mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 999
+        mnc: 70
+      tac: 7
+    tai:
+      plmn_id:
+        mcc: 724
+        mnc: 21
+      tac: 12345
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:db8:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:db8:cafe::1/48
+    metrics:
+      - addr: 127.0.0.7
+        port: 9090
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+#nrf:
+#    sbi:
+#      - addr:
+#        - 127.0.0.10
+#        - ::1
+#        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+    metrics:
+      - addr: 127.0.0.13
+        port: 9090
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: 127.0.0.10
+        port: 7777
+        s_nssai:
+          sst: 1
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777
+
+time:
+  t3512:
+    value: 540     # 9 mintues * 60 = 540 seconds

configs/freeDiameter/hss.conf.in

@@ -0,0 +1,266 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included file(s) 
+# where the "include" keyword is found.
+
+
+##############################################################
+##  Peer identity and realm 
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "hss.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+##  Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+#Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections (TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+#SecPort = 5868;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed 
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the 
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections. 
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+##  Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "127.0.0.8";
+
+
+##############################################################
+##  Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+##  TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
+TLS_Cred = "@sysconfdir@/open5gs/tls/hss.crt", "@sysconfdir@/open5gs/tls/hss.key";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+TLS_CA = "@sysconfdir@/open5gs/tls/ca.crt";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have been verified before. 
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges 
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+#   http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function, 
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start 
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+##  Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+##  Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing 
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA 
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+##  Extensions configuration
+
+#  The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+#  These extensions may in addition receive the name of a 
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_*  for extensions useful only to retrieve more information on the framework execution.
+# acl_*  : Access control list, to control which peers are allowed to connect.
+# rt_*   : routing extensions that impact how messages are forwarded to other peers.
+# app_*  : applications, these extensions usually register callbacks to handle specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter displays some
+# information about some events. This extension does not actually use a configuration file
+# but receives directly a parameter in the string passed to the extension. Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information about sent and received messages.
+# The four digits respectively control: connections, routing decisions, sent/received messages, errors.
+# The values for each digit are:
+#  0 - default - keep the default behavior
+#  1 - quiet   - remove any specific log
+#  2 - compact - display only a summary of the information
+#  4 - full    - display the complete information on a single long line
+#  8 - tree    - display the complete information in an easier to read format spanning several lines.
+
+LoadExtension = "@libdir@/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "@libdir@/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca_3gpp.fdx";
+
+
+##############################################################
+##  Peers configuration
+
+#  The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this behavior (e.g., acl_wl).
+# 
+#  In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some 
+# Diameter nodes and allow connections from these nodes.
+#  This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+#  No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+#  No_TLS;       # assume transparent security instead of TLS. DTLS is not supported yet (will change in future versions).
+#  Port = 5868;  # The port to connect to
+#  TcTimer = 30;
+#  TwTimer = 30;
+#  ConnectTo = "202.249.37.5";
+#  ConnectTo = "2001:200:903:2::202:1";
+#  TLS_Prio = "NORMAL";
+#  Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
+ConnectPeer = "mme.localdomain" { ConnectTo = "127.0.0.2"; No_TLS; };
+
+##############################################################

configs/freeDiameter/meson.build

@@ -0,0 +1,36 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+freediameter_sysconfdir = join_paths(sysconfdir, 'freeDiameter')
+meson.add_install_script(python3_exe, '-c',
+        mkdir_p.format(freediameter_sysconfdir))
+
+freediameter_conf = '''
+    mme.conf
+    hss.conf
+    smf.conf
+    pcrf.conf
+'''.split()
+
+foreach file : freediameter_conf
+    gen = configure_file(
+            input : file + '.in',
+            output : file,
+            configuration : conf_data)
+    meson.add_install_script(python3_exe, '-c',
+            install_conf.format(gen, freediameter_sysconfdir))
+endforeach

configs/freeDiameter/mme.conf.in

@@ -0,0 +1,267 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included file(s) 
+# where the "include" keyword is found.
+
+
+##############################################################
+##  Peer identity and realm 
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "mme.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+##  Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+#Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections (TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+#SecPort = 5868;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed 
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the 
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections. 
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+##  Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "127.0.0.2";
+
+
+##############################################################
+##  Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+##  TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
+TLS_Cred = "@sysconfdir@/open5gs/tls/mme.crt", "@sysconfdir@/open5gs/tls/mme.key";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+TLS_CA = "@sysconfdir@/open5gs/tls/ca.crt";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have been verified before. 
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges 
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+#   http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function, 
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start 
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+##  Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+##  Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing 
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA 
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+##  Extensions configuration
+
+#  The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+#  These extensions may in addition receive the name of a 
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_*  for extensions useful only to retrieve more information on the framework execution.
+# acl_*  : Access control list, to control which peers are allowed to connect.
+# rt_*   : routing extensions that impact how messages are forwarded to other peers.
+# app_*  : applications, these extensions usually register callbacks to handle specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter displays some
+# information about some events. This extension does not actually use a configuration file
+# but receives directly a parameter in the string passed to the extension. Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information about sent and received messages.
+# The four digits respectively control: connections, routing decisions, sent/received messages, errors.
+# The values for each digit are:
+#  0 - default - keep the default behavior
+#  1 - quiet   - remove any specific log
+#  2 - compact - display only a summary of the information
+#  4 - full    - display the complete information on a single long line
+#  8 - tree    - display the complete information in an easier to read format spanning several lines.
+
+LoadExtension = "@libdir@/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "@libdir@/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca_3gpp.fdx";
+
+
+##############################################################
+##  Peers configuration
+
+#  The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this behavior (e.g., acl_wl).
+# 
+#  In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some 
+# Diameter nodes and allow connections from these nodes.
+#  This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+#  No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+#  No_TLS;       # assume transparent security instead of TLS. DTLS is not supported yet (will change in future versions).
+#  Port = 5868;  # The port to connect to
+#  TcTimer = 30;
+#  TwTimer = 30;
+#  ConnectTo = "202.249.37.5";
+#  ConnectTo = "2001:200:903:2::202:1";
+#  TLS_Prio = "NORMAL";
+#  Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
+ConnectPeer = "hss.localdomain" { ConnectTo = "127.0.0.8"; No_TLS; };
+
+
+##############################################################

configs/freeDiameter/pcrf.conf.in

@@ -0,0 +1,266 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included file(s) 
+# where the "include" keyword is found.
+
+
+##############################################################
+##  Peer identity and realm 
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "pcrf.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+##  Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+#Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections (TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+#SecPort = 5868;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed 
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the 
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections. 
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+##  Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "127.0.0.9";
+
+
+##############################################################
+##  Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+##  TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
+TLS_Cred = "@sysconfdir@/open5gs/tls/pcrf.crt", "@sysconfdir@/open5gs/tls/pcrf.key";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+TLS_CA = "@sysconfdir@/open5gs/tls/ca.crt";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have been verified before. 
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges 
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+#   http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function, 
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start 
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+##  Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+##  Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing 
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA 
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+##  Extensions configuration
+
+#  The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+#  These extensions may in addition receive the name of a 
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_*  for extensions useful only to retrieve more information on the framework execution.
+# acl_*  : Access control list, to control which peers are allowed to connect.
+# rt_*   : routing extensions that impact how messages are forwarded to other peers.
+# app_*  : applications, these extensions usually register callbacks to handle specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter displays some
+# information about some events. This extension does not actually use a configuration file
+# but receives directly a parameter in the string passed to the extension. Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information about sent and received messages.
+# The four digits respectively control: connections, routing decisions, sent/received messages, errors.
+# The values for each digit are:
+#  0 - default - keep the default behavior
+#  1 - quiet   - remove any specific log
+#  2 - compact - display only a summary of the information
+#  4 - full    - display the complete information on a single long line
+#  8 - tree    - display the complete information in an easier to read format spanning several lines.
+
+LoadExtension = "@libdir@/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "@libdir@/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca_3gpp.fdx";
+
+
+##############################################################
+##  Peers configuration
+
+#  The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this behavior (e.g., acl_wl).
+# 
+#  In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some 
+# Diameter nodes and allow connections from these nodes.
+#  This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+#  No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+#  No_TLS;       # assume transparent security instead of TLS. DTLS is not supported yet (will change in future versions).
+#  Port = 5868;  # The port to connect to
+#  TcTimer = 30;
+#  TwTimer = 30;
+#  ConnectTo = "202.249.37.5";
+#  ConnectTo = "2001:200:903:2::202:1";
+#  TLS_Prio = "NORMAL";
+#  Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
+ConnectPeer = "smf.localdomain" { ConnectTo = "127.0.0.4"; No_TLS; };
+
+##############################################################

configs/freeDiameter/smf.conf.in

@@ -0,0 +1,267 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included file(s) 
+# where the "include" keyword is found.
+
+
+##############################################################
+##  Peer identity and realm 
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "smf.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+##  Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+#Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections (TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+#SecPort = 5868;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed 
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the 
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections. 
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+##  Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "127.0.0.4";
+
+
+##############################################################
+##  Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+##  TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
+TLS_Cred = "@sysconfdir@/open5gs/tls/smf.crt", "@sysconfdir@/open5gs/tls/smf.key";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+TLS_CA = "@sysconfdir@/open5gs/tls/ca.crt";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have been verified before. 
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges 
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+#   http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function, 
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start 
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+##  Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+##  Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing 
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA 
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+##  Extensions configuration
+
+#  The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+#  These extensions may in addition receive the name of a 
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_*  for extensions useful only to retrieve more information on the framework execution.
+# acl_*  : Access control list, to control which peers are allowed to connect.
+# rt_*   : routing extensions that impact how messages are forwarded to other peers.
+# app_*  : applications, these extensions usually register callbacks to handle specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter displays some
+# information about some events. This extension does not actually use a configuration file
+# but receives directly a parameter in the string passed to the extension. Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information about sent and received messages.
+# The four digits respectively control: connections, routing decisions, sent/received messages, errors.
+# The values for each digit are:
+#  0 - default - keep the default behavior
+#  1 - quiet   - remove any specific log
+#  2 - compact - display only a summary of the information
+#  4 - full    - display the complete information on a single long line
+#  8 - tree    - display the complete information in an easier to read format spanning several lines.
+
+LoadExtension = "@libdir@/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "@libdir@/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca.fdx";
+LoadExtension = "@libdir@/freeDiameter/dict_dcca_3gpp.fdx";
+
+
+##############################################################
+##  Peers configuration
+
+#  The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this behavior (e.g., acl_wl).
+# 
+#  In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some 
+# Diameter nodes and allow connections from these nodes.
+#  This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+#  No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+#  No_TLS;       # assume transparent security instead of TLS. DTLS is not supported yet (will change in future versions).
+#  Port = 5868;  # The port to connect to
+#  TcTimer = 30;
+#  TwTimer = 30;
+#  ConnectTo = "202.249.37.5";
+#  ConnectTo = "2001:200:903:2::202:1";
+#  TLS_Prio = "NORMAL";
+#  Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
+ConnectPeer = "pcrf.localdomain" { ConnectTo = "127.0.0.9"; No_TLS; };
+
+
+##############################################################

configs/logrotate/meson.build

@@ -0,0 +1,19 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+file = 'open5gs'
+configure_file(input : file + '.in', output : file, configuration : conf_data)

configs/logrotate/open5gs.in

@@ -0,0 +1,14 @@
+@localstatedir@/log/open5gs/*.log {
+    daily
+    sharedscripts
+    missingok
+    compress
+    rotate 14
+    create 640 open5gs open5gs
+
+    postrotate
+        for i in nrfd scpd pcrfd hssd ausfd udmd udrd upfd sgwcd sgwud smfd mmed amfd; do
+            systemctl reload open5gs-$i
+        done
+    endscript
+}

configs/meson.build

@@ -0,0 +1,55 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+conf_data = configuration_data()
+
+conf_data.set('bindir', bindir)
+conf_data.set('sysconfdir', sysconfdir)
+conf_data.set('libdir', libdir)
+conf_data.set('localstatedir', localstatedir)
+
+build_configs_dir = join_paths(open5gs_build_dir, 'configs')
+conf_data.set('build_configs_dir', build_configs_dir)
+
+build_subprojects_freeDiameter_extensions_dir = join_paths(
+        open5gs_build_dir, 'subprojects', 'freeDiameter', 'extensions')
+conf_data.set('build_subprojects_freeDiameter_extensions_dir',
+        build_subprojects_freeDiameter_extensions_dir)
+
+example_conf = '''
+    sample.yaml
+    310014.yaml
+    csfb.yaml
+    volte.yaml
+    vonr.yaml
+    slice.yaml
+    srsenb.yaml
+    non3gpp.yaml
+'''.split()
+
+foreach file : example_conf
+    gen = configure_file(
+            input : file + '.in',
+            output : file,
+            configuration : conf_data)
+endforeach
+
+subdir('open5gs')
+subdir('freeDiameter')
+subdir('systemd')
+subdir('logrotate')
+subdir('newsyslog')

configs/newsyslog/meson.build

@@ -0,0 +1,19 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+file = 'open5gs.conf'
+configure_file(input : file + '.in', output : file, configuration : conf_data)

configs/newsyslog/open5gs.conf.in

@@ -0,0 +1,16 @@
+# truncate rails logs every day at midnight, keep 14 previous logs, compress previous logs
+#
+# logfilename                         [owner:group] mode count size  when  flags [/pid_file]        [sig_num]
+@localstatedir@/log/open5gs/nrf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-nrfd/pid`
+@localstatedir@/log/open5gs/scp.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-scpd/pid`
+@localstatedir@/log/open5gs/pcrf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-pcrfd/pid`
+@localstatedir@/log/open5gs/hss.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-hssd/pid`
+@localstatedir@/log/open5gs/ausf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-ausfd/pid`
+@localstatedir@/log/open5gs/udm.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-udmd/pid`
+@localstatedir@/log/open5gs/udr.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-udrd/pid`
+@localstatedir@/log/open5gs/upf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-upfd/pid`
+@localstatedir@/log/open5gs/sgwc.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-sgwcd/pid`
+@localstatedir@/log/open5gs/sgwu.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-sgwud/pid`
+@localstatedir@/log/open5gs/smf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-smfd/pid`
+@localstatedir@/log/open5gs/mme.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-mmed/pid`
+@localstatedir@/log/open5gs/amf.log               644  14    *     $D0   GZ    @localstatedir@/run/open5gs-amfd/pid`

configs/non3gpp.yaml.in

@@ -0,0 +1,257 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+sbi:
+    server:
+      no_tls: true
+      cacert: @build_configs_dir@/open5gs/tls/ca.crt
+      key: @build_configs_dir@/open5gs/tls/testserver.key
+      cert: @build_configs_dir@/open5gs/tls/testserver.crt
+    client:
+      no_tls: true
+      cacert: @build_configs_dir@/open5gs/tls/ca.crt
+      key: @build_configs_dir@/open5gs/tls/testclient.key
+      cert: @build_configs_dir@/open5gs/tls/testclient.crt
+
+parameter:
+#    no_nrf: true
+#    no_scp: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+#    use_mongodb_change_stream: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 999
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 999
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:db8:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+        - identity: aaa.localdomain
+          addr: 127.0.0.1
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:db8:cafe::1/48
+    metrics:
+      - addr: 127.0.0.7
+        port: 9090
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+        - identity: aaa.localdomain
+          addr: 127.0.0.1
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+    metrics:
+      - addr: 127.0.0.13
+        port: 9090
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: 127.0.0.10
+        port: 7777
+        s_nssai:
+          sst: 1
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777
+
+time:
+  t3512:
+    value: 540     # 9 mintues * 60 = 540 seconds

configs/open5gs/amf.yaml.in

@@ -0,0 +1,656 @@
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/amf.log
+
+#
+#  o TLS enable/disable
+#  sbi:
+#    server|client:
+#      no_tls: false|true
+#    - false: (Default) Use TLS
+#    - true:  TLS disabled
+#
+#  o Verification enable/disable
+#  sbi:
+#    server|client:
+#      no_verify: false|true
+#    - false: (Default) Verify the PEER
+#    - true:  Skip the verification step
+#
+#  o Server-side does not use TLS
+#  sbi:
+#    server:
+#      no_tls: true
+#
+#  o Client-side skips the verification step
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#
+#  o Use the specified certificate while verifying the client
+#  sbi:
+#    server
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+#  o Use the specified certificate while verifying the server
+#  sbi:
+#    client
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+sbi:
+    server:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/amf.key
+      cert: @sysconfdir@/open5gs/tls/amf.crt
+    client:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/amf.key
+      cert: @sysconfdir@/open5gs/tls/amf.crt
+
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  amf:
+#    sbi:
+#
+#  o SBI Server(http://<any address>:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  amf:
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address available>:443)
+#  sbi:
+#    server:
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  amf:
+#    sbi:
+#
+#  o SBI Server(https://127.0.0.5:443, https://[::1]:443) without verification
+#  sbi:
+#    server:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  amf:
+#    sbi:
+#      - addr: 127.0.0.5
+#      - addr: ::1
+#
+#  o SBI Server(https://amf.open5gs.org:443)
+#    Use the specified certificate while verifying the client
+#
+#  sbi:
+#    server:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  amf:
+#    sbi:
+#      - name: amf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.5:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  amf:
+#    sbi:
+#      - addr: 127.0.0.5
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  amf:
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  amf:
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-amf.svc.local
+#
+#  o Another example of advertising on NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  amf:
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  amf:
+#    sbi:
+#      addr: 127.0.0.5
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#  <NF Service>
+#
+#  o NF Service Name(Default : all NF services available)
+#  amf:
+#    service_name:
+#
+#  o NF Service Name(Only some NF services are available)
+#  amf:
+#    service_name:
+#      - namf-comm
+#
+#  <NF Discovery Query Parameter>
+#
+#  o (Default) If you do not set Query Parameter as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  amf:
+#    sbi:
+#      - addr: 127.0.0.5
+#        port: 7777
+#
+#    - 'service-names' is included.
+#
+#  o Service-Names are not included
+#  sbi:
+#    server:
+#      no_tls: true
+#  amf:
+#    sbi:
+#      - addr: 127.0.0.5
+#        port: 7777
+#    discovery:
+#      option:
+#        no_service_names: false
+#
+#  o To remove 'service-names' from URI query parameters in NS Discovery
+#         no_service_names: true
+#
+#    * For Indirect Communication with Delegated Discovery,
+#      'service-names' is always included in the URI query parameter.
+#    * That is, 'no_service_names' has no effect.
+#
+#  <For Indirect Communication with Delegated Discovery>
+#
+#  o (Default) If you do not set Delegated Discovery as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  amf:
+#    sbi:
+#      - addr: 127.0.0.5
+#        port: 7777
+#
+#    - Use SCP if SCP avaiable. Otherwise NRF is used.
+#      => App fails if both NRF and SCP are unavailable.
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  amf:
+#    sbi:
+#      - addr: 127.0.0.5
+#        port: 7777
+#    discovery:
+#      delegated: auto
+#
+#  o To use SCP always => App fails if no SCP available.
+#      delegated: yes
+#
+#  o Don't use SCP server => App fails if no NRF available.
+#      delegated: no
+#
+#  <NGAP Server>>
+#
+#  o NGAP Server(all address available)
+#  amf:
+#    ngap:
+#
+#  o NGAP Server(0.0.0.0:38412)
+#  amf:
+#    ngap:
+#      addr: 0.0.0.0
+#
+#  o NGAP Server(127.0.0.5:38412, [::1]:38412)
+#  amf:
+#    ngap:
+#      - addr: 127.0.0.5
+#      - addr: ::1
+#
+#  o NGAP Server(different port)
+#  amf:
+#    ngap:
+#      - addr: 127.0.0.5
+#        port: 38413
+#
+#  o NGAP Server(address available in `eth0` interface)
+#  amf:
+#    ngap:
+#      dev: eth0
+#
+#  o NGAP Option (Default)
+#    - sctp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  amf:
+#    ngap:
+#      addr: 127.0.0.5
+#      option:
+#        stcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#  o NGAP SCTP Option (Default)
+#    - spp_hbinterval : 5000 (5secs)
+#    - spp_sackdelay : 200 (200ms)
+#    - srto_initial : 3000 (3secs)
+#    - srto_min : 1000 (1sec)
+#    - srto_max : 5000 (5secs)
+#    - sinit_num_ostreams : 30
+#    - sinit_max_instreams : 65535
+#    - sinit_max_attempts : 4
+#    - sinit_max_init_timeo : 8000(8secs)
+#
+#  amf:
+#    ngap:
+#      addr: 127.0.0.5
+#      option:
+#        sctp:
+#          spp_hbinterval : 5000
+#          spp_sackdelay : 200
+#          srto_initial : 3000
+#          srto_min : 1000
+#          srto_max : 5000
+#          sinit_num_ostreams : 30
+#          sinit_max_instreams : 65535
+#          sinit_max_attempts : 4
+#          sinit_max_init_timeo : 8000
+#
+#  <Metrics Server>
+#
+#  o Metrics Server(http://<any address>:9090)
+#  amf:
+#    metrics:
+#      - addr: 0.0.0.0
+#        port: 9090
+#
+#  <GUAMI>
+#
+#  o Multiple GUAMI
+#  amf:
+#    guami:
+#      - plmn_id:
+#          mcc: 999
+#          mnc: 70
+#        amf_id:
+#          region: 2
+#          set: 1
+#          pointer: 4
+#      - plmn_id:
+#          mcc: 001
+#          mnc: 01
+#        amf_id:
+#          region: 5
+#          set: 2
+#
+#  <TAI>
+#
+#  o Multiple TAI
+#  amf:
+#    tai:
+#      - plmn_id:
+#          mcc: 001
+#          mnc: 01
+#        tac: [1, 2, 3]
+#    tai:
+#      - plmn_id:
+#          mcc: 002
+#          mnc: 02
+#        tac: 4
+#      - plmn_id:
+#          mcc: 003
+#          mnc: 03
+#        tac: 5
+#    tai:
+#      - plmn_id:
+#          mcc: 004
+#          mnc: 04
+#        tac: [6, 7]
+#      - plmn_id:
+#          mcc: 005
+#          mnc: 05
+#        tac: 8
+#      - plmn_id:
+#          mcc: 006
+#          mnc: 06
+#        tac: [9, 10]
+#
+#  <PLMN Support>
+#
+#  o Multiple PLMN Support
+#  amf:
+#    plmn_support:
+#      - plmn_id:
+#          mcc: 999
+#          mnc: 70
+#        s_nssai:
+#          - sst: 1
+#            sd: 010000
+#      - plmn_id:
+#          mcc: 999
+#          mnc: 70
+#        s_nssai:
+#          - sst: 1
+#
+#  <Network Name>
+#
+#  amf:
+#    network_name:
+#        full: Open5GS
+#        short: Next
+#
+#  <AMF Name>
+#
+#  amf:
+#    amf_name: amf1.open5gs.amf.5gc.mnc70.mcc999.3gppnetwork.org
+#
+#  <Relative Capacity> - Default(255)
+#
+#  amf:
+#    relative_capacity: 100
+#
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    metrics:
+      - addr: 127.0.0.5
+        port: 9090
+    guami:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.1.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.1.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#      - addr: ::1
+#
+#  o SBI Client(https://scp.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - name: scp.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fb::1]:80)
+#    If prefer_ipv4 is true, http://127.0.1.10:80 is selected.
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr:
+#        - 127.0.1.10
+#        - fd69:f21d:873c:fb::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#
+scp:
+    sbi:
+      - addr: 127.0.1.10
+        port: 7777
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - addr: 127.0.0.10
+#      - addr: ::1
+#
+#  o SBI Client(https://nrf.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#nrf:
+#    sbi:
+#      - addr:
+#          - 127.0.0.10
+#          - ::1
+#        port: 7777
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:
+
+#
+# usrsctp:
+#    udp_port : 9899
+#
+usrsctp:
+
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#    (Default values are used, so no configuration is required)
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#  time:
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+#
+#  o Handover Wait Duration (Default : 300 ms)
+#    Time to wait for AMF to send UEContextReleaseCommand
+#    to the source gNB after receiving HandoverNotify
+#    (Default values are used, so no configuration is required)
+#
+#  o Handover Wait Duration (500ms)
+#  time:
+#    handover:
+#        duration: 500
+#
+#  o Timers of 5GS mobility/session management
+#  time:
+#    t3502:
+#      value: 720  # 12 minutes * 60 = 720 seconds
+#    t3512:
+#      value: 3240 # 54 minutes * 60 = 3240 seconds
+#
+time:
+  t3512:
+    value: 540     # 9 mintues * 60 = 540 seconds

configs/open5gs/ausf.yaml.in

@@ -0,0 +1,441 @@
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/ausf.log
+
+#
+#  o TLS enable/disable
+#  sbi:
+#    server|client:
+#      no_tls: false|true
+#    - false: (Default) Use TLS
+#    - true:  TLS disabled
+#
+#  o Verification enable/disable
+#  sbi:
+#    server|client:
+#      no_verify: false|true
+#    - false: (Default) Verify the PEER
+#    - true:  Skip the verification step
+#
+#  o Server-side does not use TLS
+#  sbi:
+#    server:
+#      no_tls: true
+#
+#  o Client-side skips the verification step
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#
+#  o Use the specified certificate while verifying the client
+#  sbi:
+#    server
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+#  o Use the specified certificate while verifying the server
+#  sbi:
+#    client
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+sbi:
+    server:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/ausf.key
+      cert: @sysconfdir@/open5gs/tls/ausf.crt
+    client:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/ausf.key
+      cert: @sysconfdir@/open5gs/tls/ausf.crt
+
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  ausf:
+#    sbi:
+#
+#  o SBI Server(http://<any address>:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  ausf:
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address available>:443)
+#  sbi:
+#    server:
+#      key: /etc/open5gs/tls/ausf.key
+#      cert: /etc/open5gs/tls/ausf.crt
+#  ausf:
+#    sbi:
+#
+#  o SBI Server(https://127.0.0.11:443, https://[::1]:443) without verification
+#  sbi:
+#    server:
+#      no_verify: true
+#      key: /etc/open5gs/tls/ausf.key
+#      cert: /etc/open5gs/tls/ausf.crt
+#  ausf:
+#    sbi:
+#      - addr: 127.0.0.11
+#      - addr: ::1
+#
+#  o SBI Server(https://ausf.open5gs.org:443)
+#    Use the specified certificate while verifying the client
+#
+#  sbi:
+#    server:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/ausf.key
+#      cert: /etc/open5gs/tls/ausf.crt
+#  ausf:
+#    sbi:
+#      - name: ausf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.11:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  ausf:
+#    sbi:
+#      - addr: 127.0.0.11
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  ausf:
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  ausf:
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-ausf.svc.local
+#
+#  o Another example of advertising on NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  ausf:
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  ausf:
+#    sbi:
+#      addr: 127.0.0.11
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#  <NF Service>
+#
+#  o NF Service Name(Default : all NF services available)
+#  ausf:
+#    service_name:
+#
+#  o NF Service Name(Only some NF services are available)
+#  ausf:
+#    service_name:
+#      - nausf-auth
+#
+#  <NF Discovery Query Parameter>
+#
+#  o (Default) If you do not set Query Parameter as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  ausf:
+#    sbi:
+#      - addr: 127.0.0.11
+#        port: 7777
+#
+#    - 'service-names' is included.
+#
+#  o Service-Names are not included
+#  sbi:
+#    server:
+#      no_tls: true
+#  ausf:
+#    sbi:
+#      - addr: 127.0.0.11
+#        port: 7777
+#    discovery:
+#      option:
+#        no_service_names: false
+#
+#  o To remove 'service-names' from URI query parameters in NS Discovery
+#         no_service_names: true
+#
+#    * For Indirect Communication with Delegated Discovery,
+#      'service-names' is always included in the URI query parameter.
+#    * That is, 'no_service_names' has no effect.
+#
+#  <For Indirect Communication with Delegated Discovery>
+#
+#  o (Default) If you do not set Delegated Discovery as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  ausf:
+#    sbi:
+#      - addr: 127.0.0.11
+#        port: 7777
+#
+#    - Use SCP if SCP avaiable. Otherwise NRF is used.
+#      => App fails if both NRF and SCP are unavailable.
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  ausf:
+#    sbi:
+#      - addr: 127.0.0.11
+#        port: 7777
+#    discovery:
+#      delegated: auto
+#
+#  o To use SCP always => App fails if no SCP available.
+#      delegated: yes
+#
+#  o Don't use SCP server => App fails if no NRF available.
+#      delegated: no
+#
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.1.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.1.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#      - addr: ::1
+#
+#  o SBI Client(https://scp.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - name: scp.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fb::1]:80)
+#    If prefer_ipv4 is true, http://127.0.1.10:80 is selected.
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr:
+#        - 127.0.1.10
+#        - fd69:f21d:873c:fb::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#
+scp:
+    sbi:
+      - addr: 127.0.1.10
+        port: 7777
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - addr: 127.0.0.10
+#      - addr: ::1
+#
+#  o SBI Client(https://nrf.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#nrf:
+#    sbi:
+#      - addr:
+#          - 127.0.0.10
+#          - ::1
+#        port: 7777
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:
+
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#    (Default values are used, so no configuration is required)
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#  time:
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+time:

configs/open5gs/bsf.yaml.in

@@ -0,0 +1,443 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/bsf.log
+
+#
+#  o TLS enable/disable
+#  sbi:
+#    server|client:
+#      no_tls: false|true
+#    - false: (Default) Use TLS
+#    - true:  TLS disabled
+#
+#  o Verification enable/disable
+#  sbi:
+#    server|client:
+#      no_verify: false|true
+#    - false: (Default) Verify the PEER
+#    - true:  Skip the verification step
+#
+#  o Server-side does not use TLS
+#  sbi:
+#    server:
+#      no_tls: true
+#
+#  o Client-side skips the verification step
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#
+#  o Use the specified certificate while verifying the client
+#  sbi:
+#    server
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+#  o Use the specified certificate while verifying the server
+#  sbi:
+#    client
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+sbi:
+    server:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/bsf.key
+      cert: @sysconfdir@/open5gs/tls/bsf.crt
+    client:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/bsf.key
+      cert: @sysconfdir@/open5gs/tls/bsf.crt
+
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#
+#  o SBI Server(http://<any address>:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address available>:443)
+#  sbi:
+#    server:
+#      key: /etc/open5gs/tls/bsf.key
+#      cert: /etc/open5gs/tls/bsf.crt
+#  bsf:
+#    sbi:
+#
+#  o SBI Server(https://127.0.0.15:443, https://[::1]:443) without verification
+#  sbi:
+#    server:
+#      no_verify: true
+#      key: /etc/open5gs/tls/bsf.key
+#      cert: /etc/open5gs/tls/bsf.crt
+#  bsf:
+#    sbi:
+#      - addr: 127.0.0.15
+#      - addr: ::1
+#
+#  o SBI Server(https://bsf.open5gs.org:443)
+#    Use the specified certificate while verifying the client
+#
+#  sbi:
+#    server:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/bsf.key
+#      cert: /etc/open5gs/tls/bsf.crt
+#  bsf:
+#    sbi:
+#      - name: bsf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.15:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - addr: 127.0.0.15
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-bsf.svc.local
+#
+#  o Another example of advertising on NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      addr: 127.0.0.15
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#  <NF Service>
+#
+#  o NF Service Name(Default : all NF services available)
+#  bsf:
+#    service_name:
+#
+#  o NF Service Name(Only some NF services are available)
+#  bsf:
+#    service_name:
+#      - nbsf-management
+#
+#  <NF Discovery Query Parameter>
+#
+#  o (Default) If you do not set Query Parameter as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - addr: 127.0.0.15
+#        port: 7777
+#
+#    - 'service-names' is included.
+#
+#  o Service-Names are not included
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - addr: 127.0.0.15
+#        port: 7777
+#    discovery:
+#      option:
+#        no_service_names: false
+#
+#  o To remove 'service-names' from URI query parameters in NS Discovery
+#         no_service_names: true
+#
+#    * For Indirect Communication with Delegated Discovery,
+#      'service-names' is always included in the URI query parameter.
+#    * That is, 'no_service_names' has no effect.
+#
+#  <For Indirect Communication with Delegated Discovery>
+#
+#  o (Default) If you do not set Delegated Discovery as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - addr: 127.0.0.15
+#        port: 7777
+#
+#    - Use SCP if SCP avaiable. Otherwise NRF is used.
+#      => App fails if both NRF and SCP are unavailable.
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - addr: 127.0.0.15
+#        port: 7777
+#    discovery:
+#      delegated: auto
+#
+#  o To use SCP always => App fails if no SCP available.
+#      delegated: yes
+#
+#  o Don't use SCP server => App fails if no NRF available.
+#      delegated: no
+#
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.1.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.1.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#      - addr: ::1
+#
+#  o SBI Client(https://scp.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - name: scp.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fb::1]:80)
+#    If prefer_ipv4 is true, http://127.0.1.10:80 is selected.
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr:
+#        - 127.0.1.10
+#        - fd69:f21d:873c:fb::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#
+scp:
+    sbi:
+      - addr: 127.0.1.10
+        port: 7777
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - addr: 127.0.0.10
+#      - addr: ::1
+#
+#  o SBI Client(https://nrf.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#nrf:
+#    sbi:
+#      - addr:
+#          - 127.0.0.10
+#          - ::1
+#        port: 7777
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:
+
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#    (Default values are used, so no configuration is required)
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#  time:
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+time:

configs/open5gs/hnet/curve25519-1.key

@@ -0,0 +1,3 @@
+-----BEGIN PRIVATE KEY-----
+MC4CAQAwBQYDK2VuBCIEIBDJxn6GGlYloduPaEEjiW2bNQYZnT3xlo4HtshEi7FH
+-----END PRIVATE KEY-----

configs/open5gs/hnet/curve25519-3.key

@@ -0,0 +1,3 @@
+-----BEGIN PRIVATE KEY-----
+MC4CAQAwBQYDK2VuBCIEIFAK2WjCQjB8TU7COXwdIKVhKGjPa+SJuyOVObjfW9hM
+-----END PRIVATE KEY-----

configs/open5gs/hnet/curve25519-5.key

@@ -0,0 +1,3 @@
+-----BEGIN PRIVATE KEY-----
+MC4CAQAwBQYDK2VuBCIEIHh8rsYF8otbnyb8bcrhD1AAV5C9iBtjTlYJY3k5k0dt
+-----END PRIVATE KEY-----

configs/open5gs/hnet/meson.build

@@ -0,0 +1,38 @@
+# Copyright (C) 2022 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+hnet_sysconfdir = join_paths(open5gs_sysconfdir, 'hnet')
+meson.add_install_script(python3_exe, '-c',
+        mkdir_p.format(hnet_sysconfdir))
+
+hnet_security = '''
+  curve25519-1.key
+  secp256r1-2.key
+  curve25519-3.key
+  secp256r1-4.key
+  curve25519-5.key
+  secp256r1-6.key
+'''.split()
+
+foreach file : hnet_security
+    gen = configure_file(
+            input : file,
+            output : file,
+            configuration : conf_data)
+    meson.add_install_script(python3_exe, '-c',
+            install_conf.format(gen, hnet_sysconfdir))
+endforeach

configs/open5gs/hnet/secp256r1-2.key

@@ -0,0 +1,8 @@
+-----BEGIN EC PARAMETERS-----
+BggqhkjOPQMBBw==
+-----END EC PARAMETERS-----
+-----BEGIN EC PRIVATE KEY-----
+MHcCAQEEIHSp+RhHH1bzvv2lxR1zij+U9aUtS8nbl5n1Il+8zd5BoAoGCCqGSM49
+AwEHoUQDQgAEre/NExfRzoVi7CW5G0gAEg4SNtbiZh6kI1qE48hdokS8QqWUz1YS
+9J6PvihX2OSZ+RMixzf8zxu9tuTUJKgKlQ==
+-----END EC PRIVATE KEY-----

configs/open5gs/hnet/secp256r1-4.key

@@ -0,0 +1,8 @@
+-----BEGIN EC PARAMETERS-----
+BggqhkjOPQMBBw==
+-----END EC PARAMETERS-----
+-----BEGIN EC PRIVATE KEY-----
+MHcCAQEEIAGZvsOAU0YMHhBK33hRkGMPkA3Xefq5b5hPQD6qnf5goAoGCCqGSM49
+AwEHoUQDQgAEdXfTAGY+0ibQoO9bfmk7+M/l//BiMzO6lNIUEMSj1k3k9SQPygGY
+jAuUHpVM4Uo6cWxuyurEn8pWn1vF3tVhbg==
+-----END EC PRIVATE KEY-----

configs/open5gs/hnet/secp256r1-6.key

@@ -0,0 +1,8 @@
+-----BEGIN EC PARAMETERS-----
+BggqhkjOPQMBBw==
+-----END EC PARAMETERS-----
+-----BEGIN EC PRIVATE KEY-----
+MHcCAQEEIG3VKSXh/3WK0HzCkN1DgeUjF7TSLgAUyMn/WGHsxrZ3oAoGCCqGSM49
+AwEHoUQDQgAENU1ibHe7oWu4m6M8P0XoA78ZNKtdIsJgVU0nCk/c5sC3V+/4GuxU
+owtbASEXQZg4SGvts+1Yqz0p4WwCAAcwpQ==
+-----END EC PRIVATE KEY-----

configs/open5gs/hss.yaml.in

@@ -0,0 +1,63 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/hss.log
+
+hss:
+    freeDiameter: @sysconfdir@/freeDiameter/hss.conf
+
+#
+#  hss:
+#    sms_over_ims: "sip:smsc.mnc001.mcc001.3gppnetwork.org:7060;transport=tcp"
+#
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+#  o Use MongoDB Change Stream
+#  parameter:
+#    use_mongodb_change_stream: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:

configs/open5gs/meson.build

@@ -0,0 +1,51 @@
+# Copyright (C) 2019 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+open5gs_sysconfdir = join_paths(sysconfdir, 'open5gs')
+meson.add_install_script(python3_exe, '-c',
+        mkdir_p.format(open5gs_sysconfdir))
+
+open5gs_conf = '''
+    mme.yaml
+    sgwc.yaml
+    sgwu.yaml
+    smf.yaml
+    amf.yaml
+    upf.yaml
+    hss.yaml
+    pcrf.yaml
+    nrf.yaml
+    scp.yaml
+    ausf.yaml
+    udm.yaml
+    udr.yaml
+    pcf.yaml
+    nssf.yaml
+    bsf.yaml
+'''.split()
+
+foreach file : open5gs_conf
+    gen = configure_file(
+            input : file + '.in',
+            output : file,
+            configuration : conf_data)
+    meson.add_install_script(python3_exe, '-c',
+            install_conf.format(gen, open5gs_sysconfdir))
+endforeach
+
+subdir('tls')
+subdir('hnet')

configs/open5gs/mme.yaml.in

@@ -0,0 +1,461 @@
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/mme.log
+
+#
+#  <S1AP Server>>
+#
+#  o S1AP Server(all address available)
+#  mme:
+#    s1ap:
+#
+#  o S1AP Server(0.0.0.0:36412)
+#  mme:
+#    s1ap:
+#      addr: 0.0.0.0
+#
+#  o S1AP Server(127.0.0.2:36412, [::1]:36412)
+#  mme:
+#    s1ap:
+#      - addr: 127.0.0.2
+#      - addr: ::1
+#
+#  o S1AP Server(different port)
+#  mme:
+#    s1ap:
+#      - addr: 127.0.0.2
+#        port: 36413
+#
+#  o S1AP Server(address available in `eth0` interface)
+#  mme:
+#    s1ap:
+#      dev: eth0
+#
+#  o S1AP Option (Default)
+#    - sctp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  mme:
+#    s1ap:
+#      addr: 127.0.0.2
+#      option:
+#        stcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#  o S1AP SCTP Option (Default)
+#    - spp_hbinterval : 5000 (5secs)
+#    - spp_sackdelay : 200 (200ms)
+#    - srto_initial : 3000 (3secs)
+#    - srto_min : 1000 (1sec)
+#    - srto_max : 5000 (5secs)
+#    - sinit_num_ostreams : 30
+#    - sinit_max_instreams : 65535
+#    - sinit_max_attempts : 4
+#    - sinit_max_init_timeo : 8000(8secs)
+#
+#  mme:
+#    s1ap:
+#      addr: 127.0.0.2
+#      option:
+#        sctp:
+#          spp_hbinterval : 5000
+#          spp_sackdelay : 200
+#          srto_initial : 3000
+#          srto_min : 1000
+#          srto_max : 5000
+#          sinit_num_ostreams : 30
+#          sinit_max_instreams : 65535
+#          sinit_max_attempts : 4
+#          sinit_max_init_timeo : 8000
+#
+#  <GTP-C Server>>
+#
+#  o GTP-C Server(all address available)
+#  mme:
+#    gtpc:
+#
+#  o GTP-C Server(127.0.0.2:2123, [::1]:2123)
+#  mme:
+#    gtpc:
+#      - addr: 127.0.0.2
+#      - addr: ::1
+#
+#  <SGsAP>
+#
+#  o Single MSC/VLR(127.0.0.2)
+#  mme:
+#    sgsap:
+#      addr: 127.0.0.2
+#      map:
+#        tai:
+#          plmn_id:
+#            mcc: 001
+#            mnc: 01
+#          tac: 4130
+#        lai:
+#          plmn_id:
+#            mcc: 001
+#            mnc: 01
+#          lac: 43690
+#      map:
+#        tai:
+#          plmn_id:
+#            mcc: 002
+#            mnc: 02
+#          tac: 4132
+#        lai:
+#          plmn_id:
+#            mcc: 002
+#            mnc: 02
+#          lac: 43692
+#
+#  o Multiple MSC/VLR
+#  mme:
+#    sgsap:
+#      - addr: 127.0.0.2
+#        port: 29119
+#        map:
+#          tai:
+#            plmn_id:
+#              mcc: 001
+#              mnc: 01
+#            tac: 4131
+#          lai:
+#            plmn_id:
+#              mcc: 001
+#              mnc: 01
+#            lac: 43691
+#        map:
+#          tai:
+#            plmn_id:
+#              mcc: 002
+#              mnc: 02
+#            tac: 4132
+#          lai:
+#            plmn_id:
+#              mcc: 002
+#              mnc: 02
+#            lac: 43692
+#      - addr
+#         - 127.0.0.4
+#         - fd69:f21d:873c:fa::2
+#        map:
+#          tai:
+#            plmn_id:
+#              mcc: 001
+#              mnc: 01
+#            tac: 4132
+#          lai:
+#            plmn_id:
+#              mcc: 002
+#              mnc: 02
+#            lac: 43692
+#      - name: msc.open5gs.org
+#        map:
+#          tai:
+#            plmn_id:
+#              mcc: 001
+#              mnc: 01
+#            tac: 4133
+#          lai:
+#            plmn_id:
+#              mcc: 002
+#              mnc: 02
+#            lac: 43693
+#
+#  <Metrics Server>
+#
+#  o Metrics Server(http://<any address>:9090)
+#  mme:
+#    metrics:
+#      - addr: 0.0.0.0
+#        port: 9090
+#
+#  <GUMMEI>
+#
+#  o Multiple GUMMEI
+#  mme:
+#    gummei:
+#      - plmn_id:
+#          mcc: 001
+#          mnc: 01
+#        mme_gid: 2
+#        mme_code: 1
+#      - plmn_id:
+#          - mcc: 002
+#            mnc: 02
+#          - mcc: 003
+#            mnc: 03
+#        mme_gid: [3, 4]
+#        mme_code:
+#          - 2
+#          - 3
+#
+#
+#  <TAI>
+#
+#  o Multiple TAI
+#  mme:
+#    tai:
+#      - plmn_id:
+#          mcc: 001
+#          mnc: 01
+#        tac: [1, 2, 3]
+#    tai:
+#      - plmn_id:
+#          mcc: 002
+#          mnc: 02
+#        tac: 4
+#      - plmn_id:
+#          mcc: 003
+#          mnc: 03
+#        tac: 5
+#    tai:
+#      - plmn_id:
+#          mcc: 004
+#          mnc: 04
+#        tac: [6, 7]
+#      - plmn_id:
+#          mcc: 005
+#          mnc: 05
+#        tac: 8
+#      - plmn_id:
+#          mcc: 006
+#          mnc: 06
+#        tac: [9, 10]
+#
+#
+#  <Network Name>
+#  mme:
+#    network_name:
+#        full: Open5GS
+#        short: Next
+#
+#  <MME Name>
+#  mme:
+#    mme_name: open5gs-mme0
+#
+#  <Relative Capacity> - Default(255)
+#  mme:
+#    relative_capacity: 100
+#
+mme:
+    freeDiameter: @sysconfdir@/freeDiameter/mme.conf
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    metrics:
+      - addr: 127.0.0.2
+        port: 9090
+    gummei:
+      plmn_id:
+        mcc: 999
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 999
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+    network_name:
+        full: Open5GS
+    mme_name: open5gs-mme0
+
+#
+# <GTP-C Client>
+#
+#  o Specify SGW addresses the GTP-C must connect to
+#
+#  o One SGW is defined.
+#    If prefer_ipv4 is not true, [fd69:f21d:873c:fa::2] is selected.
+#  sgwc:
+#    gtpc:
+#      addr:
+#        - 127.0.0.3
+#        - fd69:f21d:873c:fa::2
+#
+#  o Two SGW are defined. MME selects SGW with round-robin manner per UE
+#  sgwc:
+#    gtpc:
+#      - addr: 127.0.0.3
+#      - addr: fd69:f21d:873c:fa::2
+#
+#  o Three SGW are defined. MME selects SGW with round-robin manner per UE
+#  sgwc:
+#    gtpc:
+#      - addr
+#        - 127.0.0.3
+#        - fd69:f21d:873c:fa::2
+#      - addr
+#        - 127.0.0.22
+#        - fd69:f21d:873c:fa::12
+#      - name: sgw3.open5gs.org
+#
+# <SGW Selection Mode>
+#
+#  o Round-Robin
+#  sgwc:
+#    gtpc:
+#      addr: 127.0.0.3
+#      addr: 127.0.2.2
+#      addr: 127.0.4.2
+#
+#  o SGW selection by eNodeB TAC
+#   (either single TAC or multiple TACs, DECIMAL representation)
+#
+#  sgwc:
+#    gtpc:
+#      - addr: 127.0.0.3
+#        tac: 26000
+#      - addr: 127.0.2.2
+#        tac: [25000, 27000, 28000]
+#
+# o SGW selection by e_cell_id(28bit)
+#   (either single or multiple e_cell_id, HEX representation)
+#
+#  sgwc:
+#    gtpc:
+#      - addr: 127.0.0.3
+#        e_cell_id: abcde01
+#      - addr: 127.0.2.2
+#        e_cell_id: [12345, a9413, 98765]
+#
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+
+#
+# smf:
+#
+#  <GTP-C Client>
+#
+#  o By default, the SMF uses the first SMF node.
+#    - To use a different APN for each SMF, specify gtpc.apn as the APN name.
+#    - If the HSS uses WebUI to set the SMF IP for each UE,
+#      you can use a specific SMF node for each UE.
+#    (Default values are used, so no configuration is required)
+#
+#  o Two SMF are defined. 127.0.0.4:2123 is used.
+#    [fd69:f21d:873c:fa::3]:2123 is ignored.
+#  smf:
+#    gtpc:
+#      - addr: 127.0.0.4
+#      - addr: fd69:f21d:873c:fa::3
+#
+#  o One SMF is defined. if prefer_ipv4 is not true,
+#    [fd69:f21d:873c:fa::3] is selected.
+#  smf:
+#    gtpc:
+#      - addr:
+#        - 127.0.0.4
+#        - fd69:f21d:873c:fa::3
+#
+#  o Two SMF are defined with a different APN.
+#    - Note that if SMF IP for UE is configured in HSS,
+#      the following configurion for this UE is ignored.
+#  smf:
+#    gtpc:
+#      - addr: 127.0.0.4
+#        apn: internet
+#      - addr: 127.0.0.5
+#        apn: volte
+#
+#  o If APN is omitted, the default APN uses the first SMF node.
+#  smf:
+#    gtpc:
+#      - addr: 127.0.0.4
+#      - addr: 127.0.0.5
+#        apn: volte
+smf:
+    gtpc:
+      - addr:
+        - 127.0.0.4
+        - ::1
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:
+
+#
+# usrsctp:
+#    udp_port : 9899
+#
+usrsctp:
+
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+#
+#  o Handover Wait Duration (Default : 300 ms)
+#    Time to wait for MME to send UEContextReleaseCommand
+#    to the source eNB after receiving HandoverNotify
+#    (Default values are used, so no configuration is required)
+#
+#  o Handover Wait Duration (500ms)
+#  time:
+#    handover:
+#        duration: 500
+#
+#  o Timers of EPS mobility/session management
+#  time:
+#    t3402:
+#      value: 720  # 12 minutes * 60 = 720 seconds
+#    t3412:
+#      value: 3240 # 54 minutes * 60 = 3240 seconds
+#    t3423:
+#      value: 720  # 12 minutes * 60 = 720 seconds
+time:

configs/open5gs/nrf.yaml.in

@@ -0,0 +1,337 @@
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/nrf.log
+
+#
+#  o TLS enable/disable
+#  sbi:
+#    server|client:
+#      no_tls: false|true
+#    - false: (Default) Use TLS
+#    - true:  TLS disabled
+#
+#  o Verification enable/disable
+#  sbi:
+#    server|client:
+#      no_verify: false|true
+#    - false: (Default) Verify the PEER
+#    - true:  Skip the verification step
+#
+#  o Server-side does not use TLS
+#  sbi:
+#    server:
+#      no_tls: true
+#
+#  o Client-side skips the verification step
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#
+#  o Use the specified certificate while verifying the client
+#  sbi:
+#    server
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+#  o Use the specified certificate while verifying the server
+#  sbi:
+#    client
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+sbi:
+    server:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/nrf.key
+      cert: @sysconfdir@/open5gs/tls/nrf.crt
+    client:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/nrf.key
+      cert: @sysconfdir@/open5gs/tls/nrf.crt
+
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#
+#  o SBI Server(http://<any address>:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address available>:443)
+#  sbi:
+#    server:
+#      key: /etc/open5gs/tls/nrf.key
+#      cert: /etc/open5gs/tls/nrf.crt
+#  nrf:
+#    sbi:
+#
+#  o SBI Server(https://127.0.0.10:443, https://[::1]:443) without verification
+#  sbi:
+#    server:
+#      no_verify: true
+#      key: /etc/open5gs/tls/nrf.key
+#      cert: /etc/open5gs/tls/nrf.crt
+#  nrf:
+#    sbi:
+#      - addr: 127.0.0.10
+#      - addr: ::1
+#
+#  o SBI Server(https://nrf.open5gs.org:443)
+#    Use the specified certificate while verifying the client
+#
+#  sbi:
+#    server:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/nrf.key
+#      cert: /etc/open5gs/tls/nrf.crt
+#  nrf:
+#    sbi:
+#      - name: nrf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.10:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      - addr: 127.0.0.10
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-nrf.svc.local
+#
+#  o Another example of advertising on NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#  <NF Service>
+#
+#  o NF Service Name(Default : all NF services available)
+#  nrf:
+#    service_name:
+#
+#  o NF Service Name(Only some NF services are available)
+#  nrf:
+#    service_name:
+#      - nnrf-nfm
+#      - nnrf-disc
+#
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.1.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.1.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#      - addr: ::1
+#
+#  o SBI Client(https://scp.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - name: scp.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fb::1]:80)
+#    If prefer_ipv4 is true, http://127.0.1.10:80 is selected.
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr:
+#        - 127.0.1.10
+#        - fd69:f21d:873c:fb::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#
+scp:
+    sbi:
+      - addr: 127.0.1.10
+        port: 7777
+
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:
+
+#
+#
+#  o NF Instance Heartbeat (Default : 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o NF Instance Heartbeat (Disabled)
+#  time:
+#    nf_instance:
+#      heartbeat: 0
+#
+#  o NF Instance Heartbeat (5 seconds)
+#  time:
+#    nf_instance:
+#      heartbeat: 5
+#
+#  o NF Instance Validity (Default : 3600 seconds = 1 hour)
+#    (Default values are used, so no configuration is required)
+#
+#  o NF Instance Validity (10 seconds)
+#  time:
+#    nf_instance:
+#      validity: 10
+#
+#  o Subscription Validity (Default : 86400 seconds = 1 day)
+#    (Default values are used, so no configuration is required)
+#
+#  o Subscription Validity (Disabled)
+#  time:
+#    subscription:
+#      validity: 0
+#
+#  o Subscription Validity (3600 seconds = 1 hour)
+#  time:
+#    subscription:
+#      validity: 3600
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+time:

configs/open5gs/nssf.yaml.in

@@ -0,0 +1,499 @@
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/nssf.log
+
+#
+#  o TLS enable/disable
+#  sbi:
+#    server|client:
+#      no_tls: false|true
+#    - false: (Default) Use TLS
+#    - true:  TLS disabled
+#
+#  o Verification enable/disable
+#  sbi:
+#    server|client:
+#      no_verify: false|true
+#    - false: (Default) Verify the PEER
+#    - true:  Skip the verification step
+#
+#  o Server-side does not use TLS
+#  sbi:
+#    server:
+#      no_tls: true
+#
+#  o Client-side skips the verification step
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#
+#  o Use the specified certificate while verifying the client
+#  sbi:
+#    server
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+#  o Use the specified certificate while verifying the server
+#  sbi:
+#    client
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+sbi:
+    server:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/nssf.key
+      cert: @sysconfdir@/open5gs/tls/nssf.crt
+    client:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/nssf.key
+      cert: @sysconfdir@/open5gs/tls/nssf.crt
+
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  nssf:
+#    sbi:
+#
+#  o SBI Server(http://<any address>:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  nssf:
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address available>:443)
+#  sbi:
+#    server:
+#      key: /etc/open5gs/tls/nssf.key
+#      cert: /etc/open5gs/tls/nssf.crt
+#  nssf:
+#    sbi:
+#
+#  o SBI Server(https://127.0.0.14:443, https://[::1]:443) without verification
+#  sbi:
+#    server:
+#      no_verify: true
+#      key: /etc/open5gs/tls/nssf.key
+#      cert: /etc/open5gs/tls/nssf.crt
+#  nssf:
+#    sbi:
+#      - addr: 127.0.0.14
+#      - addr: ::1
+#
+#  o SBI Server(https://nssf.open5gs.org:443)
+#    Use the specified certificate while verifying the client
+#
+#  sbi:
+#    server:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/nssf.key
+#      cert: /etc/open5gs/tls/nssf.crt
+#  nssf:
+#    sbi:
+#      - name: nssf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.14:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  nssf:
+#    sbi:
+#      - addr: 127.0.0.14
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  nssf:
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  nssf:
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-nssf.svc.local
+#
+#  o Another example of advertising on NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  nssf:
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  nssf:
+#    sbi:
+#      addr: 127.0.0.14
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#  <List of available Network Slice Instance(NSI)>
+#
+#  o One NSI
+#   - NRF[http://::1:7777/nnrf-nfm/v1/nf-instances]
+#     NSSAI[SST:1]
+#
+#  nssf:
+#    nsi:
+#      - addr: ::1
+#        port: 7777
+#        s_nssai:
+#          sst: 1
+#
+#  o Three NSI
+#   1. NRF[http://::1:7777/nnrf-nfm/v1/nf-instances]
+#      S-NSSAI[SST:1]
+#
+#   2. NRF[http://127.0.0.19:7777/nnrf-nfm/v1/nf-instances]
+#      NSSAI[SST:1, SD:000080]
+#
+#   2. NRF[http://127.0.0.10:7777/nnrf-nfm/v1/nf-instances]
+#      NSSAI[SST:1, SD:009000]
+#
+#  nssf:
+#    nsi:
+#      - addr: ::1
+#        port: 7777
+#        s_nssai:
+#          sst: 1
+#      - addr: 127.0.0.19
+#        port: 7777
+#        s_nssai:
+#          sst: 1
+#          sd: 000080
+#      - addr: 127.0.0.10
+#        port: 7777
+#        s_nssai:
+#          sst: 1
+#          sd: 009000
+#
+#  o NSI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  nssf:
+#    nsi:
+#      addr: ::1
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#  <NF Service>
+#
+#  o NF Service Name(Default : all NF services available)
+#  nssf:
+#    service_name:
+#
+#  o NF Service Name(Only some NF services are available)
+#  nssf:
+#    service_name:
+#      - nnssf-nsselection
+#
+#  <NF Discovery Query Parameter>
+#
+#  o (Default) If you do not set Query Parameter as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  nssf:
+#    sbi:
+#      - addr: 127.0.0.14
+#        port: 7777
+#
+#    - 'service-names' is included.
+#
+#  o Service-Names are not included
+#  sbi:
+#    server:
+#      no_tls: true
+#  nssf:
+#    sbi:
+#      - addr: 127.0.0.14
+#        port: 7777
+#    discovery:
+#      option:
+#        no_service_names: false
+#
+#  o To remove 'service-names' from URI query parameters in NS Discovery
+#         no_service_names: true
+#
+#    * For Indirect Communication with Delegated Discovery,
+#      'service-names' is always included in the URI query parameter.
+#    * That is, 'no_service_names' has no effect.
+#
+#  <For Indirect Communication with Delegated Discovery>
+#
+#  o (Default) If you do not set Delegated Discovery as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  nssf:
+#    sbi:
+#      - addr: 127.0.0.14
+#        port: 7777
+#
+#    - Use SCP if SCP avaiable. Otherwise NRF is used.
+#      => App fails if both NRF and SCP are unavailable.
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  nssf:
+#    sbi:
+#      - addr: 127.0.0.14
+#        port: 7777
+#    discovery:
+#      delegated: auto
+#
+#  o To use SCP always => App fails if no SCP available.
+#      delegated: yes
+#
+#  o Don't use SCP server => App fails if no NRF available.
+#      delegated: no
+#
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: 127.0.0.10
+        port: 7777
+        s_nssai:
+          sst: 1
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.1.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.1.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#      - addr: ::1
+#
+#  o SBI Client(https://scp.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - name: scp.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fb::1]:80)
+#    If prefer_ipv4 is true, http://127.0.1.10:80 is selected.
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr:
+#        - 127.0.1.10
+#        - fd69:f21d:873c:fb::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#
+scp:
+    sbi:
+      - addr: 127.0.1.10
+        port: 7777
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - addr: 127.0.0.10
+#      - addr: ::1
+#
+#  o SBI Client(https://nrf.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#nrf:
+#    sbi:
+#      - addr:
+#          - 127.0.0.10
+#          - ::1
+#        port: 7777
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:
+
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#    (Default values are used, so no configuration is required)
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#  time:
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+time:

configs/open5gs/pcf.yaml.in

@@ -0,0 +1,427 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/pcf.log
+
+#
+#  o TLS enable/disable
+#  sbi:
+#    server|client:
+#      no_tls: false|true
+#    - false: (Default) Use TLS
+#    - true:  TLS disabled
+#
+#  o Verification enable/disable
+#  sbi:
+#    server|client:
+#      no_verify: false|true
+#    - false: (Default) Verify the PEER
+#    - true:  Skip the verification step
+#
+#  o Server-side does not use TLS
+#  sbi:
+#    server:
+#      no_tls: true
+#
+#  o Client-side skips the verification step
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#
+#  o Use the specified certificate while verifying the client
+#  sbi:
+#    server
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+#  o Use the specified certificate while verifying the server
+#  sbi:
+#    client
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+sbi:
+    server:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/pcf.key
+      cert: @sysconfdir@/open5gs/tls/pcf.crt
+    client:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/pcf.key
+      cert: @sysconfdir@/open5gs/tls/pcf.crt
+
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  pcf:
+#    sbi:
+#
+#  o SBI Server(http://<any address>:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  pcf:
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address available>:443)
+#  sbi:
+#    server:
+#      key: /etc/open5gs/tls/pcf.key
+#      cert: /etc/open5gs/tls/pcf.crt
+#  pcf:
+#    sbi:
+#
+#  o SBI Server(https://127.0.0.13:443, https://[::1]:443) without verification
+#  sbi:
+#    server:
+#      no_verify: true
+#      key: /etc/open5gs/tls/pcf.key
+#      cert: /etc/open5gs/tls/pcf.crt
+#  pcf:
+#    sbi:
+#      - addr: 127.0.0.13
+#      - addr: ::1
+#
+#  o SBI Server(https://pcf.open5gs.org:443)
+#    Use the specified certificate while verifying the client
+#
+#  sbi:
+#    server:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/pcf.key
+#      cert: /etc/open5gs/tls/pcf.crt
+#  pcf:
+#    sbi:
+#      - name: pcf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.13:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  pcf:
+#    sbi:
+#      - addr: 127.0.0.13
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  pcf:
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  pcf:
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-pcf.svc.local
+#
+#  o Another example of advertising on NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  pcf:
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  pcf:
+#    sbi:
+#      addr: 127.0.0.13
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#  <NF Service>
+#
+#  o NF Service Name(Default : all NF services available)
+#  pcf:
+#    service_name:
+#
+#  o NF Service Name(Only some NF services are available)
+#  pcf:
+#    service_name:
+#      - npcf-am-policy-control
+#      - npcf-smpolicycontrol
+#      - npcf-policyauthorization
+#
+#  == NOTE ==
+#  Placing npcf-smpolicycontrol and pcf-policyauthorization
+#  in different NFs is not supported. Both npcf-smpolicycontrol
+#  and pcf-policyauthorization should be placed in the same NF.
+#
+#  <NF Discovery Query Parameter>
+#
+#  o (Default) If you do not set Query Parameter as shown below,
+#
+#    sbi:
+#      - addr: 127.0.0.13
+#        port: 7777
+#
+#    - 'service-names' is included.
+#
+#    sbi:
+#      - addr: 127.0.0.13
+#        port: 7777
+#    discovery:
+#      option:
+#        no_service_names: false
+#
+#  o To remove 'service-names' from URI query parameters in NS Discovery
+#         no_service_names: true
+#
+#    * For Indirect Communication with Delegated Discovery,
+#      'service-names' is always included in the URI query parameter.
+#    * That is, 'no_service_names' has no effect.
+#
+#  <For Indirect Communication with Delegated Discovery>
+#
+#  o (Default) If you do not set Delegated Discovery as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  pcf:
+#    sbi:
+#      - addr: 127.0.0.13
+#        port: 7777
+#
+#    - Use SCP if SCP avaiable. Otherwise NRF is used.
+#      => App fails if both NRF and SCP are unavailable.
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  pcf:
+#    sbi:
+#      - addr: 127.0.0.13
+#        port: 7777
+#    discovery:
+#      delegated: auto
+#
+#  o To use SCP always => App fails if no SCP available.
+#      delegated: yes
+#
+#  o Don't use SCP server => App fails if no NRF available.
+#      delegated: no
+#
+#
+#  <Metrics Server>
+#
+#  o Metrics Server(http://<any address>:9090)
+#  pcf:
+#    metrics:
+#    - addr: 0.0.0.0
+#      port: 9090
+#
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+    metrics:
+      - addr: 127.0.0.13
+        port: 9090
+
+#
+# scp:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.1.10:7777)
+#    sbi:
+#      addr: 127.0.1.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.1.10:443, http://scp.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.1.10
+#        tls:
+#          key: /etc/open5gs/tls/pcf.key
+#          cert: /etc/open5gs/tls/pcf.crt
+#      - name: scp.open5gs.org
+#
+#  o SBI Client(https://scp.open5gs.org:443)
+#    Use the specified certificate to verify peer
+#
+#    sbi:
+#      - name: scp.open5gs.org
+#        tls:
+#          cacert: /etc/open5gs/tls/ca.crt
+#
+#  o SBI Client(http://[fd69:f21d:873c:fb::1]:80)
+#    If prefer_ipv4 is true, http://127.0.1.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.1.10
+#        - fd69:f21d:873c:fb::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#    sbi:
+#      addr: 127.0.1.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#
+scp:
+    sbi:
+      - addr: 127.0.1.10
+        port: 7777
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, https://[::1]:443)
+#  tls:
+#    client:
+#      key: /etc/open5gs/tls/pcf.key
+#      cert: /etc/open5gs/tls/pcf.crt
+#  nrf:
+#    sbi:
+#      - addr: 127.0.0.10
+#      - addr: ::1
+#
+#  o SBI Client(https://nrf.open5gs.org:443)
+#    Use the specified certificate to verify server
+#
+#  tls:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#  nrf:
+#    sbi:
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#    sbi:
+#      addr: 127.0.0.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#nrf:
+#    sbi:
+#      - addr:
+#          - 127.0.0.10
+#          - ::1
+#        port: 7777
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:
+
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#    (Default values are used, so no configuration is required)
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#  time:
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+time:

configs/open5gs/pcrf.yaml.in

@@ -0,0 +1,54 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/pcrf.log
+
+pcrf:
+    freeDiameter: @sysconfdir@/freeDiameter/pcrf.conf
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:

configs/open5gs/scp.yaml.in

@@ -0,0 +1,394 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/scp.log
+
+#
+#  o TLS enable/disable
+#  sbi:
+#    server|client:
+#      no_tls: false|true
+#    - false: (Default) Use TLS
+#    - true:  TLS disabled
+#
+#  o Verification enable/disable
+#  sbi:
+#    server|client:
+#      no_verify: false|true
+#    - false: (Default) Verify the PEER
+#    - true:  Skip the verification step
+#
+#  o Server-side does not use TLS
+#  sbi:
+#    server:
+#      no_tls: true
+#
+#  o Client-side skips the verification step
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#
+#  o Use the specified certificate while verifying the client
+#  sbi:
+#    server
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+#  o Use the specified certificate while verifying the server
+#  sbi:
+#    client
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+sbi:
+    server:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/scp.key
+      cert: @sysconfdir@/open5gs/tls/scp.crt
+    client:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/scp.key
+      cert: @sysconfdir@/open5gs/tls/scp.crt
+
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  scp:
+#    sbi:
+#
+#  o SBI Server(http://<any address>:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address available>:443)
+#  sbi:
+#    server:
+#      key: /etc/open5gs/tls/scp.key
+#      cert: /etc/open5gs/tls/scp.crt
+#  scp:
+#    sbi:
+#
+#  o SBI Server(https://127.0.1.10:443, https://[::1]:443) without verification
+#  sbi:
+#    server:
+#      no_verify: true
+#      key: /etc/open5gs/tls/scp.key
+#      cert: /etc/open5gs/tls/scp.crt
+#  scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#      - addr: ::1
+#
+#  o SBI Server(https://scp.open5gs.org:443)
+#    Use the specified certificate while verifying the client
+#
+#  sbi:
+#    server:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/scp.key
+#      cert: /etc/open5gs/tls/scp.crt
+#  scp:
+#    sbi:
+#      - name: scp.open5gs.org
+#
+#  o SBI Server(http://127.0.1.10:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-scp.svc.local
+#
+#  o Another example of advertising on NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#  <For Indirect Communication with Delegated Discovery>
+#
+#  o (Default) If you do not set Delegated Discovery as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#        port: 7777
+#
+#    - Use SCP if SCP avaiable. Otherwise NRF is used.
+#      => App fails if both NRF and SCP are unavailable.
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#        port: 7777
+#    discovery:
+#      delegated: auto
+#
+#  o To use SCP always => App fails if no SCP available.
+#      delegated: yes
+#
+#  o Don't use SCP server => App fails if no NRF available.
+#      delegated: no
+#
+scp:
+    sbi:
+      - addr: 127.0.1.10
+        port: 7777
+
+#  <Next hop SCP>
+#
+#  o SBI Client(http://127.0.1.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  next_scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.1.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  next_scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#      - addr: ::1
+#
+#  o SBI Client(https://scp.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  next_scp:
+#    sbi:
+#      - name: scp.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fb::1]:80)
+#    If prefer_ipv4 is true, http://127.0.1.10:80 is selected.
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  next_scp:
+#    sbi:
+#      addr:
+#        - 127.0.1.10
+#        - fd69:f21d:873c:fb::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  next_scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - addr: 127.0.0.10
+#      - addr: ::1
+#
+#  o SBI Client(https://nrf.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:
+
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#    (Default values are used, so no configuration is required)
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#  time:
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+time:

configs/open5gs/sgwc.yaml.in

@@ -0,0 +1,177 @@
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/sgwc.log
+
+#
+#  <GTP-C Server>
+#
+#  o GTP-C Server(127.0.0.3:2123, [fd69:f21d:873c:fa::2]:2123)
+#  sgwc:
+#    gtpc:
+#      addr:
+#        - 127.0.0.3
+#        - fd69:f21d:873c:fa::2
+#
+#  o On SGW, Same Configuration(127.0.0.3:2123,
+#  [fd69:f21d:873c:fa::2]:2123) as below.
+#  sgwc:
+#    gtpc:
+#      - addr: 127.0.0.3
+#      - addr: fd69:f21d:873c:fa::2
+#
+#  o GTP-C Option (Default)
+#    - so_bindtodevice : NULL
+#
+#  sgwc:
+#    gtpc:
+#      addr: 127.0.0.3
+#      option:
+#        so_bindtodevice: vrf-blue
+#
+#  <PFCP Server>
+#
+#  o PFCP Server(127.0.0.3:8805, ::1:8805)
+#  sgwc:
+#    pfcp:
+#      - addr: 127.0.0.3
+#      - addr: ::1
+#
+#  o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+#  sgwc:
+#    pfcp:
+#      name: localhost
+#
+#  o PFCP Option (Default)
+#    - so_bindtodevice : NULL
+#
+#  sgwc:
+#    pfcp:
+#      addr: 127.0.0.3
+#      option:
+#        so_bindtodevice: vrf-blue
+#
+#  o Provide custom PFCP address to be advertised in PFCP association
+#      request/respond
+#  sgwc:
+#    pfcp:
+#      - addr: 0.0.0.0
+#        advertise: open5gs-smf.svc.local
+#
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+#
+#  <PFCP Client>>
+#
+#  o PFCP Client(127.0.0.6:8805)
+#  sgwu:
+#    pfcp:
+#      addr: 127.0.0.6
+#
+#  <SGWU_SELECTION_MODE - EPC only>
+#
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#      - addr: 127.0.0.12
+#      - addr: 127.0.0.18
+#
+# o SGWU selection by eNodeB TAC
+#   (either single TAC or multiple TACs, DECIMAL representation)
+#
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#        tac: 1
+#      - addr: 127.0.0.12
+#        tac: [3,5,8]
+#
+# o SGWU selection by UE's APN (either single APN or multiple APNs)
+#
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#        apn: ims
+#      - addr: 127.0.0.12
+#        apn: [internet, web]
+#
+# o SGWU selection by CellID(e_cell_id: 28bit)
+#   (either single e_cell_id or multiple e_cell_id, HEX representation)
+#
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#        e_cell_id: 463
+#      - addr: 127.0.0.12
+#        e_cell_id: [123456789, 9413]
+#
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+#  o Disable selection of SGW-U PFCP in Round-Robin manner
+#  parameter:
+#    no_pfcp_rr_select: true
+#
+parameter:
+
+#
+# o Maximum Number of UE
+# max:
+#   ue: 1024
+#
+# o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+# max:
+#   peer: 64
+#
+# o Maximum Number of GTP peer nodes per SGWC/SMF
+# max:
+#   gtp_peer: 64
+#
+max:
+
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+time:

configs/open5gs/sgwu.yaml.in

@@ -0,0 +1,166 @@
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/sgwu.log
+
+#
+#  <PFCP Server>
+#
+#  o PFCP Server(127.0.0.6:8805, ::1:8805)
+#  sgwu:
+#    pfcp:
+#      - addr: 127.0.0.6
+#      - addr: ::1
+#
+#  o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+#  sgwu:
+#    pfcp:
+#      - name: localhost
+#
+#  o PFCP Option (Default)
+#    - so_bindtodevice : NULL
+#
+#  sgwu:
+#    pfcp:
+#      addr: 127.0.0.6
+#      option:
+#        so_bindtodevice: vrf-blue
+#
+#  o Provide custom PFCP address to be advertised in PFCP association
+#      request/respond
+#  sgwc:
+#    pfcp:
+#      - addr: 0.0.0.0
+#        advertise: open5gs-smf.svc.local
+#
+#  <GTP-U Server>
+#
+#  o GTP-U Server(127.0.0.6:2152, [::1]:2152)
+#    gtpu:
+#      - addr: 127.0.0.6
+#      - addr: ::1
+#
+#  o GTP-U Server(127.0.0.1:2152, [::1]:2152)
+#  sgwu:
+#    gtpu:
+#      - name: localhost
+#
+#  o User Plane IP Resource information
+#  sgwu:
+#    gtpu:
+#      - addr:
+#        - 127.0.0.6
+#        - ::1
+#        teid_range_indication: 4
+#        teid_range: 10
+#        network_instance: internet
+#        source_interface: 0
+#      - addr: 127.0.10.4
+#        teid_range_indication: 4
+#        teid_range: 5
+#        network_instance: ims
+#        source_interface: 1
+#
+#  o Provide custom SGW-U GTP-U address to be advertised inside S1AP messages
+#  sgwu:
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise: 172.24.15.30
+#
+#  sgwu:
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise:
+#        - 127.0.0.1
+#        - ::1
+#
+#  sgwu:
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise: sgw1.epc.mnc001.mcc001.3gppnetwork.org
+#
+#  sgwu:
+#    gtpu:
+#      - dev: ens3
+#        advertise: sgw1.epc.mnc001.mcc001.3gppnetwork.org
+#
+#  o GTP-U Option (Default)
+#    - so_bindtodevice : NULL
+#
+#  sgwu:
+#    gtpu:
+#      addr: 127.0.0.6
+#      option:
+#        so_bindtodevice: vrf-blue
+#
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+#
+#  <PFCP Client>>
+#
+#  o PFCP Client(127.0.0.3:8805)
+#  sgwc:
+#    pfcp:
+#      addr: 127.0.0.3
+#
+sgwc:
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+# o Maximum Number of UE
+# max:
+#   ue: 1024
+#
+# o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+# max:
+#   peer: 64
+#
+max:
+
+#
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+time:

configs/open5gs/smf.yaml.in

@@ -0,0 +1,888 @@
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/smf.log
+
+#
+#  o TLS enable/disable
+#  sbi:
+#    server|client:
+#      no_tls: false|true
+#    - false: (Default) Use TLS
+#    - true:  TLS disabled
+#
+#  o Verification enable/disable
+#  sbi:
+#    server|client:
+#      no_verify: false|true
+#    - false: (Default) Verify the PEER
+#    - true:  Skip the verification step
+#
+#  o Server-side does not use TLS
+#  sbi:
+#    server:
+#      no_tls: true
+#
+#  o Client-side skips the verification step
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#
+#  o Use the specified certificate while verifying the client
+#  sbi:
+#    server
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+#  o Use the specified certificate while verifying the server
+#  sbi:
+#    client
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+sbi:
+    server:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/smf.key
+      cert: @sysconfdir@/open5gs/tls/smf.crt
+    client:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/smf.key
+      cert: @sysconfdir@/open5gs/tls/smf.crt
+
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  smf:
+#    sbi:
+#
+#  o SBI Server(http://<any address>:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  smf:
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address available>:443)
+#  sbi:
+#    server:
+#      key: /etc/open5gs/tls/smf.key
+#      cert: /etc/open5gs/tls/smf.crt
+#  smf:
+#    sbi:
+#
+#  o SBI Server(https://127.0.0.4:443, https://[::1]:443) without verification
+#  sbi:
+#    server:
+#      no_verify: true
+#      key: /etc/open5gs/tls/smf.key
+#      cert: /etc/open5gs/tls/smf.crt
+#  smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#      - addr: ::1
+#
+#  o SBI Server(https://smf.open5gs.org:443)
+#    Use the specified certificate while verifying the client
+#
+#  sbi:
+#    server:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/smf.key
+#      cert: /etc/open5gs/tls/smf.crt
+#  smf:
+#    sbi:
+#      - name: smf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.4:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  smf:
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  smf:
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-smf.svc.local
+#
+#  o Another example of advertising on NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  smf:
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  smf:
+#    sbi:
+#      addr: 127.0.0.4
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#
+#  <NF Service>
+#
+#  o NF Service Name(Default : all NF services available)
+#  smf:
+#    service_name:
+#
+#  o NF Service Name(Only some NF services are available)
+#  smf:
+#    service_name:
+#      - nsmf-pdusession
+#
+#  <NF Discovery Query Parameter>
+#
+#  o (Default) If you do not set Query Parameter as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+#
+#    - 'service-names' is included.
+#
+#  o Service-Names are not included
+#  sbi:
+#    server:
+#      no_tls: true
+#  smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+#    discovery:
+#      option:
+#        no_service_names: false
+#
+#  o To remove 'service-names' from URI query parameters in NS Discovery
+#         no_service_names: true
+#
+#    * For Indirect Communication with Delegated Discovery,
+#      'service-names' is always included in the URI query parameter.
+#    * That is, 'no_service_names' has no effect.
+#
+#  <For Indirect Communication with Delegated Discovery>
+#
+#  o (Default) If you do not set Delegated Discovery as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+#
+#    - Use SCP if SCP avaiable. Otherwise NRF is used.
+#      => App fails if both NRF and SCP are unavailable.
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  smf:
+#    sbi:
+#      - addr: 127.0.0.4
+#        port: 7777
+#    discovery:
+#      delegated: auto
+#
+#  o To use SCP always => App fails if no SCP available.
+#      delegated: yes
+#
+#  o Don't use SCP server => App fails if no NRF available.
+#      delegated: no
+#
+#  <PFCP Server>
+#
+#  o PFCP Server(127.0.0.4:8805, ::1:8805)
+#  smf:
+#    pfcp:
+#      - addr: 127.0.0.4
+#      - addr: ::1
+#
+#  o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+#  smf:
+#    pfcp:
+#      name: localhost
+#
+#  o PFCP Option (Default)
+#    - so_bindtodevice : NULL
+#
+#  smf:
+#    pfcp:
+#      addr: 127.0.0.4
+#      option:
+#        so_bindtodevice: vrf-blue
+#
+#  o Provide custom PFCP address to be advertised to UPF in PFCP association
+#      request/respond
+#  smf:
+#    pfcp:
+#      - addr: 0.0.0.0
+#        advertise: open5gs-smf.svc.local
+#
+#  <GTP-C Server>
+#
+#  o GTP-C Server(127.0.0.4:2123, [fd69:f21d:873c:fa::3]:2123)
+#  smf:
+#    gtpc:
+#      addr:
+#        - 127.0.0.4
+#        - fd69:f21d:873c:fa::3
+#
+#  o On SMF, Same configuration
+#    (127.0.0.4:2123, [fd69:f21d:873c:fa::3]:2123).
+#  smf:
+#    gtpc:
+#      - addr: 127.0.0.4
+#      - addr: fd69:f21d:873c:fa::3
+#
+#  o GTP-C Option (Default)
+#    - so_bindtodevice : NULL
+#
+#  smf:
+#    gtpc:
+#      addr: 127.0.0.4
+#      option:
+#        so_bindtodevice: vrf-blue
+#
+#  <GTP-U Server>>
+#
+#  o GTP-U Server(127.0.0.4:2152, [::1]:2152)
+#  smf:
+#    gtpu:
+#      - addr: 127.0.0.4
+#      - addr: ::1
+#
+#  o GTP-U Server(127.0.0.1:2152, [::1]:2152)
+#  smf:
+#    gtpu:
+#      name: localhost
+#
+#  o GTP-U Option (Default)
+#    - so_bindtodevice : NULL
+#
+#  smf:
+#    gtpu:
+#      addr: 127.0.0.4
+#      option:
+#        so_bindtodevice: vrf-blue
+#
+#  <Metrics Server>
+#
+#  o Metrics Server(http://<any address>:9090)
+#  smf:
+#    metrics:
+#      - addr: 0.0.0.0
+#        port: 9090
+#
+#  <Subnet for UE Pool>
+#
+#  o IPv4 Pool
+#  smf:
+#    subnet:
+#      addr: 10.45.0.1/16
+#
+#  o IPv4/IPv6 Pool
+#  smf:
+#    subnet:
+#      - addr: 10.45.0.1/16
+#      - addr: 2001:db8:cafe::1/48
+#
+#
+#  o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, 2001:db8:babe::1/48
+#    ; If the UE has unknown DNN/APN(not internet/ims), SMF/UPF will crash.
+#
+#  smf:
+#    subnet:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: 2001:db8:cafe::1/48
+#        dnn: internet
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#      - addr: 2001:db8:babe::1/48
+#        dnn: ims
+#
+#  o Specific DNN/APN with the FALLBACK SUBNET(10.47.0.1/16)
+#    ; Note that put the FALLBACK SUBNET last to avoid SMF/UPF crash.
+#
+#  smf:
+#    subnet:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#      - addr: 10.50.0.1/16 ## FALLBACK SUBNET
+#
+#  o Pool Range Sample
+#  smf:
+#    subnet:
+#      - addr: 10.45.0.1/24
+#        range: 10.45.0.100-10.45.0.200
+#
+#  smf:
+#    subnet:
+#      - addr: 10.45.0.1/24
+#        range:
+#          - 10.45.0.5-10.45.0.50
+#          - 10.45.0.100-
+#
+#  smf:
+#    subnet:
+#      - addr: 10.45.0.1/24
+#        range:
+#          - -10.45.0.200
+#          - 10.45.0.210-10.45.0.220
+#
+#  smf:
+#    subnet:
+#      - addr: 10.45.0.1/16
+#        range:
+#          - 10.45.0.100-10.45.0.200
+#          - 10.45.1.100-10.45.1.200
+#      - addr: 2001:db8:cafe::1/48
+#        range:
+#          - 2001:db8:cafe:a0::0-2001:db8:cafe:b0::0
+#          - 2001:db8:cafe:c0::0-2001:db8:cafe:d0::0
+#
+#  <Domain Name Server>
+#
+#  o Primary/Secondary can be configured. Others are ignored.
+#
+#  smf:
+#    dns:
+#      - 8.8.8.8
+#      - 8.8.4.4
+#      - 2001:4860:4860::8888
+#      - 2001:4860:4860::8844
+#
+#  <MTU Size>
+#
+#  o Provisioning a limit on the size of the packets sent by the MS
+#    to avoid packet fragmentation in the backbone network
+#    between the MS and the GGSN/PGW and/or across the (S)Gi reference point)
+#    when some of the backbone links does not support
+#    packets larger then 1500 octets
+#
+#  <P-CSCF>
+#
+#  o Proxy Call Session Control Function
+#
+#  smf:
+#    p-cscf:
+#      - 127.0.0.1
+#      - ::1
+#
+#  <CTF>
+#
+#  o Gy interface parameters towards OCS.
+#  o enabled:
+#    o auto: Default. Use Gy only if OCS available among Diameter peers
+#    o yes:  Use Gy always;
+#            reject subscribers if no OCS available among Diameter peers
+#    o no:   Don't use Gy interface if there is an OCS available
+#
+#  smf:
+#    ctf:
+#      enabled: auto|yes|no
+#
+#
+#  <SMF Selection - 5G Core only>
+#  1. SMF sends SmfInfo(S-NSSAI, DNN, TAI) to the NRF
+#  2. NRF responds to AMF with SmfInfo during NF-Discovery.
+#  3. AMF selects SMF based on S-NSSAI, DNN and TAI in SmfInfo.
+#
+#  Note that if there is no SmfInfo, any AMF can select this SMF.
+#
+#  o S-NSSAI[SST:1] and DNN[internet] - At least 1 DNN is required in S-NSSAI
+#  smf:
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            dnn:
+#              - internet
+#
+#  o S-NSSAI[SST:1 SD:009000] and DNN[internet or ims]
+#  smf:
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            sd: 009000
+#            dnn:
+#              - internet
+#              - ims
+#
+#  o S-NSSAI[SST:1] and DNN[internet] and TAI[PLMN-ID:99970 TAC:1]
+#  smf:
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 999
+#              mnc: 70
+#            tac: 1
+#
+#  o If any of conditions below are met:
+#   - S-NSSAI[SST:1] and DNN[internet] and TAI[PLMN-ID:99970 TAC:1-9]
+#   - S-NSSAI[SST:2 SD:000080] and DNN[internet or ims]
+#   - S-NSSAI[SST:4] and DNN[internet] and TAI[PLMN-ID:99970 TAC:10-20,30-40]
+#
+#  smf:
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 999
+#              mnc: 70
+#            range:
+#              - 1-9
+#      - s_nssai:
+#          - sst: 2
+#            sd: 000080
+#            dnn:
+#              - internet
+#              - ims
+#      - s_nssai:
+#          - sst: 4
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 999
+#              mnc: 70
+#            range:
+#              - 10-20
+#              - 30-40
+#
+#  o Complex Example
+#  smf:
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            dnn:
+#              - internet
+#          - sst: 1
+#            sd: 000080
+#            dnn:
+#              - internet
+#              - ims
+#          - sst: 1
+#            sd: 009000
+#            dnn:
+#              [internet, ims]
+#          - sst: 2
+#            dnn:
+#              - internet
+#          - sst: 3
+#            sd: 123456
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 999
+#              mnc: 70
+#            tac: [1, 2, 3]
+#          - plmn_id:
+#              mcc: 999
+#              mnc: 70
+#            tac: 4
+#          - plmn_id:
+#              mcc: 999
+#              mnc: 70
+#            tac:
+#              - 5
+#              - 6
+#          - plmn_id:
+#              mcc: 999
+#              mnc: 70
+#            range:
+#              - 100-200
+#              - 300-400
+#          - plmn_id:
+#              mcc: 999
+#              mnc: 70
+#            range:
+#              - 500-600
+#              - 700-800
+#              - 900-1000
+#      - s_nssai:
+#          - sst: 4
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 999
+#              mnc: 70
+#            tac: 99
+#
+#  <Security Indication - 5G Core only>
+#
+#   According to 3GPP TS38.413 Section 9.3.1.27,
+#   Security Indication IE may be instructed to 5G gNB.
+#
+#   If you set the security_indication in smf.yaml,
+#   this information is delivered using PDU Session Resource Request Transfer IE
+#
+#  smf:
+#    security_indication:
+#      integrity_protection_indication: required|preferred|not-needed
+#      confidentiality_protection_indication: required|preferred|not-needed
+#      maximum_integrity_protected_data_rate_uplink: bitrate64kbs|maximum-UE-rate
+#      maximum_integrity_protected_data_rate_downlink: bitrate64kbs|maximum-UE-rate
+#
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    metrics:
+      - addr: 127.0.0.4
+        port: 9090
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:db8:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    ctf:
+      enabled: auto
+    freeDiameter: @sysconfdir@/freeDiameter/smf.conf
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.1.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.1.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#      - addr: ::1
+#
+#  o SBI Client(https://scp.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - name: scp.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fb::1]:80)
+#    If prefer_ipv4 is true, http://127.0.1.10:80 is selected.
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr:
+#        - 127.0.1.10
+#        - fd69:f21d:873c:fb::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#
+scp:
+    sbi:
+      - addr: 127.0.1.10
+        port: 7777
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - addr: 127.0.0.10
+#      - addr: ::1
+#
+#  o SBI Client(https://nrf.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#nrf:
+#    sbi:
+#      - addr:
+#          - 127.0.0.10
+#          - ::1
+#        port: 7777
+
+#
+#  <PFCP Client>>
+#
+#  o PFCP Client(127.0.0.7:8805)
+#  upf:
+#    pfcp:
+#      addr: 127.0.0.7
+#
+#  <UPF Selection>
+#
+#  o Round-Robin
+#    (note that round robin can be disabled for a particular node
+#     by setting flag 'rr' to 0)
+#
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#      - addr: 127.0.0.12
+#        rr: 0
+#      - addr: 127.0.0.19
+#
+#  o UPF selection by eNodeB TAC
+#    (either single TAC or multiple TACs, DECIMAL representation)
+#
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#        tac: 1
+#      - addr: 127.0.0.12
+#        tac: [3,5,8]
+#
+#  o UPF selection by UE's DNN/APN (either single DNN/APN or multiple DNNs/APNs)
+#
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#        dnn: ims
+#      - addr: 127.0.0.12
+#        dnn: [internet, web]
+#
+#  o UPF selection by CellID(e_cell_id: 28bit, nr_cell_id: 36bit)
+#    (either single enb_id or multiple enb_ids, HEX representation)
+#
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#        e_cell_id: 463
+#      - addr: 127.0.0.12
+#        nr_cell_id: [123456789, 9413]
+#
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+#  o Disable selection of UPF PFCP in Round-Robin manner
+#  parameter:
+#    no_pfcp_rr_select: true
+#
+#  o Legacy support for pre-release LTE 11 devices
+#    - Omits adding local address in packet filters for compatibility
+#  parameter:
+#    no_ipv4v6_local_addr_in_packet_filter: true
+#
+parameter:
+
+#
+# o Maximum Number of UE
+# max:
+#   ue: 1024
+#
+# o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+# max:
+#   peer: 64
+#
+# o Maximum Number of GTP peer nodes per SGWC/SMF
+# max:
+#   gtp_peer: 64
+#
+max:
+
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#    (Default values are used, so no configuration is required)
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#  time:
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+#
+#  o Handover Wait Duration (Default : 300 ms)
+#    Time to wait for SMF to send
+#    PFCP Session Modification Request(Remove Indirect Tunnel) to the UPF
+#    after sending Nsmf_PDUSession_UpdateSMContext Response(hoState:COMPLETED)
+#    (Default values are used, so no configuration is required)
+#
+#  o Handover Wait Duration (500ms)
+#  time:
+#    handover:
+#        duration: 500
+time:

configs/open5gs/tls/amf.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

configs/open5gs/tls/amf.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/amf.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/tls/ausf.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

configs/open5gs/tls/ausf.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/ausf.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/tls/bsf.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

configs/open5gs/tls/bsf.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/bsf.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/tls/ca.crt

@@ -0,0 +1,21 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

configs/open5gs/tls/ca.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/tls/hss.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

configs/open5gs/tls/hss.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/hss.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/tls/meson.build

@@ -0,0 +1,63 @@
+# Copyright (C) 2022 by Sukchan Lee <acetcom@gmail.com>
+
+# This file is part of Open5GS.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+tls_sysconfdir = join_paths(open5gs_sysconfdir, 'tls')
+meson.add_install_script(python3_exe, '-c',
+        mkdir_p.format(tls_sysconfdir))
+
+tls_security = '''
+    ca.crt
+    amf.key
+    ausf.key
+    bsf.key
+    hss.key
+    mme.key
+    nrf.key
+    nssf.key
+    pcf.key
+    pcrf.key
+    scp.key
+    smf.key
+    udm.key
+    udr.key
+    amf.crt
+    ausf.crt
+    bsf.crt
+    hss.crt
+    mme.crt
+    nrf.crt
+    nssf.crt
+    pcf.crt
+    pcrf.crt
+    scp.crt
+    smf.crt
+    udm.crt
+    udr.crt
+    testserver.key
+    testserver.crt
+    testclient.key
+    testclient.crt
+'''.split()
+
+foreach file : tls_security
+    gen = configure_file(
+            input : file,
+            output : file,
+            configuration : conf_data)
+    meson.add_install_script(python3_exe, '-c',
+            install_conf.format(gen, tls_sysconfdir))
+endforeach

configs/open5gs/tls/mme.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

configs/open5gs/tls/mme.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/mme.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----
+MIIEvgIBADANBgkqhkiG9w0BAQEFAASCBKgwggSkAgEAAoIBAQDn0WGAEZEH9enX
+o63pzr/VWzQCJyix+QQckaGwvxV2LP9WRKRNukEKYxJUmX3XPa4urZRpvCc7FnXq
+LKUddGmx/cLv/NJXq6ziRbBgCguebS2ztDe9TnZZNFGZrPxH3rbPuGNjf7m4KtUU
+rZeiIapJlDoH271+vYe/qaODyCxjIsW2YkE1vQ8B/mmSfRm92EnHsIpBNyehNET3
++NwAV/a6CNaFNO/J9p4+6mZQjXdMyfbzl0IkDnXFt/Dyh5a6G7pTGIeUphuQEonW
+c3sR8unLCoh/0a9hAuJmU2AXqW90GcvPmnfW+Qpe+MrgnChn/ecbotRPmKhgTPRo
+ufhzXa9xAgMBAAECggEAHPsdqSueXzQ8pZ32XjkKiCtXP1T9mZur38B1yjQRWaKl
+fKJR4iUWACzuO+UBM6P9PyOp3rrMMsRg6G49aYcbYZ+mZmdL3/RRRZZ4cYE//kXg
+RUuTU6zX+dijF5xl4RGe9tgH64aqcAjsIPd/cfWrJXi3n9zg/f5xgUy9aaUK+4zp
+K77vv6ir3PjtHdQOqDTHblLdXJBDtNprF6Q3kvzWLdVptM2jhtsfhoZ5J4RnrkGm
+e9VwUksWnWK6NU3ezYndN2zDe8fkwRKWmLD/DLMrWxOd/E+1T2sUsiTYytxhCMpR
++x9hQZ8P1ogWivYZe0aEwzEcr9SR7sOafdnF+pFnswKBgQD/4fFSHI+c/nL0d0TR
+72BfNieuelnaxWzbsPDC8/7YzRd4g25uWCwoyMxzVntVSAdADmI2aD6REfIejLro
+m27AvEkMvXCBJIn6ZD6a/GVvLGAiJt060Y3znyRm2xCsynnfw+4RAK3Rs3Vqu4EC
+igHytUCKRsU1F3PeFYBABSKdswKBgQDn7JyG4uFl8YB3dm47SiaVxSNHVNnIKQJD
+kULqgxLV0jWbMyXx/brS+tp0ABwavRFYxhl3f1wm/ZBk7YnFCTxrpwG3E1MPu4bn
+fMJqVEbGFfJEkBePpB+3o2VFGYCrC8wsQx9+RsM98+f+jETqIn7J/j8W9Ht4Y1J/
+2mlWubqUSwKBgQDFugBSJQPMmsqVobwqRUFBEYXkS2M3rCsMMFQ7MXQSb5jdZSJm
+XffxpAhob8FqCvifRP4bcL44N5fSh4i+yazxfg0srQ5MnMGKHQBLnxF6sN2wRjvZ
+gaihQq5MVKcz/lni0XIa7V1jl7r5uN5d6erLc8flkf49olvElvS9g7pWBQKBgBNX
+3q45WgdAnzBXhlYXlyRCrvCSGR/im7e689PPXtDKmYH6QB3wxZY3KeUm5TEtt7ap
+vxICY1M1LsfcL/NpE8r+wNveFr1nLJc+BpELumNnDS++vNhUHfkY/adHuz2I3FyM
+tKG5kSsnnp/SXyUP/3clZ2motmuSDR1wv/xlvTQFAoGBAKDDpj2v3u6R5qWWWb4C
++kO41YOGAlx52pcukmPV682CQZyJHdWFG3YHNeJaSBMVayHN+roIbnZQHJGTbS0B
+jOMxgRyt6a86uGBHQ9PUDRrtOH8hcM4Wg5RnKip5GGHWnZYXH421p2ErpDE3ZAO2
+nt+0/3cXT4rENRXogOlzP3aG
+-----END PRIVATE KEY-----

configs/open5gs/tls/nrf.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

configs/open5gs/tls/nrf.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/nrf.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----
+MIIEvQIBADANBgkqhkiG9w0BAQEFAASCBKcwggSjAgEAAoIBAQCWMLTvpCEsCmY0
+kJUPXkDbRdfw6VBYvKq7qXHkbj7ZQMLBBWpcvAUYh2wrgXEXRo6yIB7aMhSQ1t8I
+t73ip/sZFKEk3CHR2oRsKJ+p68ltOPXn+bVdgrTan0aL4FQAnSoe0CK7iMqlISVB
+A/pZuLNfGiYym/EGJ3uI5dfLpzOcUJHR3y9m0YewngWVffxsY2MjRnC0FFn9UJnt
+3ai76ud/VwAsQa/DapmEgyRpa0kRtIuM9BWmtmZ553qTk8kbrbQa0YLHm87M4dXr
+4P81oHOYbDA6+A6D1Tn1nwIoTZF5qtixeZGbAal3a5EEuq2bMVeCkRdcp2nzDcad
+BNiO+vGRAgMBAAECggEADL0D06F5mMknAwVSRzPoz1A8sPew813JI1KLUOMS3I1U
+F1f0vfnKetqdj5ESfPVki/ISe9IskV5QG2auKceykd2Aj2ZGTgy5F41YgWp4spVW
+sf6pZc18tmA09Q8pQMYTuPpRP9Op0Fif1sRWGv8B46qNm9RDHJEDtsg7xc+gHn1L
+oeMNin1jZvypm/ZHv0gv2s+/ziOP9ZLcEsI/Zp8ljlGMJJ4Gv5bpZyZB6MCrC1xI
+2EOBIeQbO/DnvKw5tiflIiiE+UoTcLvRiX0yxS9IpcYTpV65uwsBsmj+yeg9eunh
+ZhoQNnEYeTwHpdzCX0ZO0IwTacb/gElutJ1n/FlMUwKBgQDKHh9UZYx1ejPrCzKT
+jyoiXClNEt14Ze3bh3hIgDLaENq24jadNYOfTyCwPd1CGYYkgnNlY8VWBtisafRW
+g7e28VGrzaEoYZ0S8p1vNsMabM1oWnq/P/oy0vY9YFvth7lZdlegDj8om+7tA0L/
+q0bDpcU0rQhLzxGExJaLJUjlIwKBgQC+OrTxkfrPvK/CIXole2Gu/Se/5smWNxGc
+LNuX39vgIzPvSf1I9rHCr4omqHoeFooujTckfNKR1yc6x/a0jPjDD35ztmPmSKs+
+8PCmhaq3yfjYnt2+0oZd3KVZ9acayNJ205/YVYxG27Gn8s2V2TnEHMXO18NZxPnL
+KHKDCGm7uwKBgDf7L+JIXicLueWYLGICfUEXFblrSDxYvxDW7NHn8C3GDU4qScYx
+VEuDtyIZgHcWarkiCKREhhvVuZ3Hmw17Xh8lp+FWCxUMNF1TJZfwKwneqOYGaYkf
+R0VceSd20P9xYD0PMiX6zDOLPRoYlS4LWoZGG+EDLBETQV7stGXF5fLRAoGAa4xN
+WHYr0t7ej2bV4/MJmyFNI9WbCu4/aoiB7i+F5AaDCjpOlL3EaklMVebSg8hCf2cf
+UeWwNvvpFfaPqCw7SCyuVUU83akgCAm4RK01g4sQwYev3n6vsMlaQq37t8zqEHw8
+1tYm5Li4jDddu+aAHjwWKYcaztnqT82iUCqlfJkCgYEAyK8xQfiWNPWADHILRDy0
+xtI415k+skYDx77dSmancF/10PGaZRO+UWI/EfweV8lR6ChSf9MuJxKZXOGupv/N
+2MY5qTAJ0WluunA/bGRS7VSzetq0ZC2LOLlARqvZQQSVINq406eUjhLzdwJZaR8z
+dtlKQ+91L56ELsd1XZ5DZfQ=
+-----END PRIVATE KEY-----

configs/open5gs/tls/nssf.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

configs/open5gs/tls/nssf.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/nssf.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/tls/pcf.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

configs/open5gs/tls/pcf.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----
+MIICjzCCAXcCAQAwSjEYMBYGA1UEAwwPcGNmLmxvY2FsZG9tYWluMQswCQYDVQQG
+EwJLTzEOMAwGA1UECAwFU2VvdWwxETAPBgNVBAoMCE5lb1BsYW5lMIIBIjANBgkq
+hkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA0kPOxtn3XQaqwlNLZn4Uq7cqc0e09S+0
+nj+ld3Ppvaz0QKbRs+lOh9Ds3XvK+/UaYSgGIISmjPXerpln8IJbg8tdRNdDMqwH
+cdVubuW4kD0nOIptedKsaelJCT3sdY3VFh1MpAqLjoloSDwx/IiZ6inIdBSZhvKD
+qglKb/wnJdP0sCKXwEl4uBImk4a+ET4+6zX7tdL2GzCv/PP/qOLLaLoJzkArEXVC
+nWqnr3/wQwEU9G3GIeTCdBGMxLcDuyTw3jPY/omVHHe4Ee+sBy1LtDYgBRkcKoY8
+75q11aM+lmYMlNOSIFw8GJ3E0EzV5/LjG0JsmbdtdBK1WAQt1fFnCQIDAQABoAAw
+DQYJKoZIhvcNAQELBQADggEBACom4xjdCg4uDodIeninSNXwaOFK4g3zI6aIDyi2
+FhBxDcutDAAJHnXTOxVNWHan09UiYUeCRlh22NXfOXTAkR2cWDDizIGlcw7IUPal
+5+AqgyoBqZ1sD51+oDkZArZad07HbaBgkHoCDBDnGcWC7E6tpd1MniVuv5xPGp+g
+TIEKR9wEiHsUEePON9rrIqntgvpq8LpHVv9+BDdn6AEbkAim0U/IvHcmCjIzwp+8
+N2iFBuqngt/P/v/A0/eL06qqWIpVuVpBIYDdd6JrMMM3QWcATiFTVX19Dpov0dRN
+2iR9zsWC2Z/NYPQzGoJyKees7prTXpOyS/s8LLMTAKGnxdY=
+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/pcf.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----
+MIIEvAIBADANBgkqhkiG9w0BAQEFAASCBKYwggSiAgEAAoIBAQDSQ87G2fddBqrC
+U0tmfhSrtypzR7T1L7SeP6V3c+m9rPRAptGz6U6H0Ozde8r79RphKAYghKaM9d6u
+mWfwgluDy11E10MyrAdx1W5u5biQPSc4im150qxp6UkJPex1jdUWHUykCouOiWhI
+PDH8iJnqKch0FJmG8oOqCUpv/Ccl0/SwIpfASXi4EiaThr4RPj7rNfu10vYbMK/8
+8/+o4stougnOQCsRdUKdaqevf/BDART0bcYh5MJ0EYzEtwO7JPDeM9j+iZUcd7gR
+76wHLUu0NiAFGRwqhjzvmrXVoz6WZgyU05IgXDwYncTQTNXn8uMbQmyZt210ErVY
+BC3V8WcJAgMBAAECggEAEobL/ORuscEpIZcyQRUh4CFy+ZZbYPEzom/sNfK+KSrI
+mLu6JXaMp1Xm0Psb3whxKxdaNtpJTIlLdinpKR1rT9kG3k5zSs8ylrqeEOJn2Tmy
+L36u97ly3KAkAc71e0Qkft7VBm0xb702tYqsQtqMaUAGPAgmoOfUZxKLfwOCNYhn
+FvD76Qvv2jOwO0UvDzrlOdDsLiDPqYGR+4VhJOGEBVzZnQeQswbhTEj9JTBNc6Dn
+Gvh5ZxhaV82yxpB8J0JVWESb3w6KDnDpCskW8IVznjr4D2hxjQRjDXx4IMcWtCVg
+BnEknKR74uSaKZza5jwGf6XwoA1YlkCNbEmGeZn8yQKBgQDlFGx/KkSNIeDOUuFQ
+9la4jBjBf0RQkost9h10SVgk7UhnUOdhAzd8gygAdL8opesoVyY2lbIhv62iH+94
+5Eoh0mLT9siKjR/d56wyQRccrjoHLt91GnD6qKeGO0hbI5QeeKbdDrbCgzEpm385
+u0HYLhlkM+bpPnMDaai5wgnPpQKBgQDq+Vx2K9lNHN/Gdz7vq0xn/oGeiT0EWQAl
+nGD9E03f1QYsSA0DqX3MWJ+7rmXHxZcT4HC1DNcgpG27mEnIVxw3n3JoPWaY5DKd
+BXvQEA+SaNfXj+nEQft/mFgVGmadhnS8IgTk3obAQXVWXrgV/0xO4YaQH4D/08Zp
+eeWr7neclQKBgBceZoy24VA0+REZgC/BjKL3UJBGnchb4bvzuKlBtamUYNg8a/14
+a6MfQWw6XAhoJkFd+jdMCDwrsgRIoMxcjba4Gs01fKuu7mZguRohQ4nbc3PCIT8a
+Ogix+KYtWXIJNyuUFZL9pygeQVnnnYFgCpccn+di7Yzgho7znNmSYZcZAoGASOpi
+r+UBhLVuF5dPd24vwqGutXSe86durT0ut7ny03+2b61YJIfHGs9xmfsPaIO/UxK1
+xukaJO4Bg1JJqxqlDfmztfc/zDgcIK/f8Pva6TMRr7nf7+AN3FV5F+teZomf1fW0
+kRUgua5WbBvughz8IApKCJVOIZUlH/wMsmLIyVUCgYBL9vzRI1RliwBWZRRHGuuX
+Eg2x3GUvIAMbA7Yfpd08VCkxPGrNtPjb+nPbV5zHf0lSrKsBzCtgy6WAulhUGTBw
+tfcU//wg+1MDb7OY3ZBy0+8e0FDfS674DnD4YT7E+RoEqSrNPJ7v+Z1+LjkQPU/k
+58Nf0K4LaLiLah5T6dNIeA==
+-----END PRIVATE KEY-----

configs/open5gs/tls/pcrf.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

configs/open5gs/tls/pcrf.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/pcrf.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/tls/scp.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

configs/open5gs/tls/scp.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/scp.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/tls/smf.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

configs/open5gs/tls/smf.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/smf.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/tls/testclient.crt

@@ -0,0 +1,21 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

configs/open5gs/tls/testclient.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/testclient.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/tls/testserver.crt

@@ -0,0 +1,21 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

configs/open5gs/tls/testserver.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----
+MIICljCCAX4CAQAwUTEfMB0GA1UEAwwWdGVzdHNlcnZlci5sb2NhbGRvbWFpbjEL
+MAkGA1UEBhMCS08xDjAMBgNVBAgMBVNlb3VsMREwDwYDVQQKDAhOZW9QbGFuZTCC
+ASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMr+ZHEDu8UN61JHsnnylP51
+4Kld2MfqsXJ5sqw9GSWrpqo/x4syPcJgbrjUEc0WgzKCcrVIS49fGgupVgU5/Vpm
+H70528s+MoHftl+KTNdHlrM9G8Yo471sz6WC+Jm+aCcTawRVi2gEkB4r5ldCQ9RD
+5DdAGx3JlcUq7i5Bm6RbtQ6yn4gZDmC4KL4wCSmkH9PpZu5OXsevvCMt394Urmse
+KTnsPQ3V/V9fsbn4rWN8W706xVgOynd/ssHVCNme0B8Tt2d12YBd0PPcUI+buR4t
+Kt2xhJj1Dm1WoGXnJHMxyrYLgNBfslypYJ+kaObwadziCYPIpXjNk9pBeJevpPMC
+AwEAAaAAMA0GCSqGSIb3DQEBCwUAA4IBAQACkHItCrvQWANviVk27ntZE/Ze1/NF
+W8jPeJG3V9Zemwp2QWE530gdhNy717kGJzW0Udvx57By4tS1bORlKDL7ikpPaIm3
+q2YLXzusJ3JXyD2aYoaY+uP6+gt1541aLep8eSQPgG0jJlo8VbbsrPrXj9T15Nsb
+MhDlKDLZhW+JCwp53/IB8Az3s6oCUelwENOTDkmuaksTbo9NX9TJ68ByAtSqroT3
+/jHqvSpD+VVnQcWn6XE6lLNyXcFcQ/jQLKLVbdV+CLPrUORNCyB5Vy7Qxm49g4lB
+H9Cx2fPDBpYw7BlFIrNU9bxLAem2lE2x+H5NbbFoMfi8Bq3q+2MWZg+a
+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/testserver.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/tls/udm.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

configs/open5gs/tls/udm.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/udm.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/tls/udr.crt

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

configs/open5gs/tls/udr.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----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+-----END CERTIFICATE REQUEST-----

configs/open5gs/tls/udr.key

@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----

configs/open5gs/udm.yaml.in

@@ -0,0 +1,505 @@
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/udm.log
+
+#
+#  o TLS enable/disable
+#  sbi:
+#    server|client:
+#      no_tls: false|true
+#    - false: (Default) Use TLS
+#    - true:  TLS disabled
+#
+#  o Verification enable/disable
+#  sbi:
+#    server|client:
+#      no_verify: false|true
+#    - false: (Default) Verify the PEER
+#    - true:  Skip the verification step
+#
+#  o Server-side does not use TLS
+#  sbi:
+#    server:
+#      no_tls: true
+#
+#  o Client-side skips the verification step
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#
+#  o Use the specified certificate while verifying the client
+#  sbi:
+#    server
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+#  o Use the specified certificate while verifying the server
+#  sbi:
+#    client
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+sbi:
+    server:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/udm.key
+      cert: @sysconfdir@/open5gs/tls/udm.crt
+    client:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/udm.key
+      cert: @sysconfdir@/open5gs/tls/udm.crt
+
+#
+#  <Home Network Public Key>
+#
+#  o Generate the private key as below.
+#    $ openssl genpkey -algorithm X25519 -out /etc/open5gs/hnet/curve25519-1.key
+#    $ openssl ecparam -name prime256v1 -genkey -conv_form compressed -out /etc/open5gs/hnet/secp256r1-2.key
+#
+#  o The private and public keys can be viewed with the command.
+#    The public key is used when creating the SIM.
+#    $ openssl pkey -in /etc/open5gs/hnet/curve25519-1.key -text
+#    $ openssl ec -in /etc/open5gs/hnet/secp256r1-2.key -conv_form compressed -text
+#
+#  o Home network public key identifier(PKI) value : 1
+#    Protection scheme identifier : ECIES scheme profile A
+#  udm:
+#    hnet:
+#      - id: 1
+#        scheme: 1
+#        key: /etc/open5gs/hnet/curve25519-1.key
+#
+#  o Home network public key identifier(PKI) value : 2
+#    Protection scheme identifier : ECIES scheme profile B
+#  udm:
+#    hnet:
+#      - id: 2
+#        scheme: 2
+#        key: /etc/open5gs/hnet/secp256r1-2.key
+#
+#  o Home network public key identifier(PKI) value : 3
+#    Protection scheme identifier : ECIES scheme profile A
+#  udm:
+#    hnet:
+#      - id: 3
+#        scheme: 1
+#        key: /etc/open5gs/hnet/curve25519-1.key
+#
+#  o Home network public key identifier(PKI) value : 4
+#    Protection scheme identifier : ECIES scheme profile B
+#  udm:
+#    hnet:
+#      - id: 4
+#        scheme: 2
+#        key: /etc/open5gs/hnet/secp256r1-2.key
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  udm:
+#    sbi:
+#
+#  o SBI Server(http://<any address>:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  udm:
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address available>:443)
+#  sbi:
+#    server:
+#      key: /etc/open5gs/tls/udm.key
+#      cert: /etc/open5gs/tls/udm.crt
+#  udm:
+#    sbi:
+#
+#  o SBI Server(https://127.0.0.12:443, https://[::1]:443) without verification
+#  sbi:
+#    server:
+#      no_verify: true
+#      key: /etc/open5gs/tls/udm.key
+#      cert: /etc/open5gs/tls/udm.crt
+#  udm:
+#    sbi:
+#      - addr: 127.0.0.12
+#      - addr: ::1
+#
+#  o SBI Server(https://udm.open5gs.org:443)
+#    Use the specified certificate while verifying the client
+#
+#  sbi:
+#    server:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/udm.key
+#      cert: /etc/open5gs/tls/udm.crt
+#  udm:
+#    sbi:
+#      - name: udm.open5gs.org
+#
+#  o SBI Server(http://127.0.0.12:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  udm:
+#    sbi:
+#      - addr: 127.0.0.12
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  udm:
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  udm:
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-udm.svc.local
+#
+#  o Another example of advertising on NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  udm:
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  udm:
+#    sbi:
+#      addr: 127.0.0.12
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#  <NF Service>
+#
+#  o NF Service Name(Default : all NF services available)
+#  udm:
+#    service_name:
+#
+#  o NF Service Name(Only some NF services are available)
+#  udm:
+#    service_name:
+#      - nudm-sdm
+#      - nudm-uecm
+#      - nudm-ueau
+#
+#  <NF Discovery Query Parameter>
+#
+#  o (Default) If you do not set Query Parameter as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  udm:
+#    sbi:
+#      - addr: 127.0.0.12
+#        port: 7777
+#
+#    - 'service-names' is included.
+#
+#  o Service-Names are not included
+#  sbi:
+#    server:
+#      no_tls: true
+#  udm:
+#    sbi:
+#      - addr: 127.0.0.12
+#        port: 7777
+#    discovery:
+#      option:
+#        no_service_names: false
+#
+#  o To remove 'service-names' from URI query parameters in NS Discovery
+#         no_service_names: true
+#
+#    * For Indirect Communication with Delegated Discovery,
+#      'service-names' is always included in the URI query parameter.
+#    * That is, 'no_service_names' has no effect.
+#
+#  <For Indirect Communication with Delegated Discovery>
+#
+#  o (Default) If you do not set Delegated Discovery as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  udm:
+#    sbi:
+#      - addr: 127.0.0.12
+#        port: 7777
+#
+#    - Use SCP if SCP avaiable. Otherwise NRF is used.
+#      => App fails if both NRF and SCP are unavailable.
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  udm:
+#    sbi:
+#      - addr: 127.0.0.12
+#        port: 7777
+#    discovery:
+#      delegated: auto
+#
+#  o To use SCP always => App fails if no SCP available.
+#      delegated: yes
+#
+#  o Don't use SCP server => App fails if no NRF available.
+#      delegated: no
+#
+udm:
+    hnet:
+      - id: 1
+        scheme: 1
+        key: @sysconfdir@/open5gs/hnet/curve25519-1.key
+      - id: 2
+        scheme: 2
+        key: @sysconfdir@/open5gs/hnet/secp256r1-2.key
+      - id: 3
+        scheme: 1
+        key: @sysconfdir@/open5gs/hnet/curve25519-3.key
+      - id: 4
+        scheme: 2
+        key: @sysconfdir@/open5gs/hnet/secp256r1-4.key
+      - id: 5
+        scheme: 1
+        key: @sysconfdir@/open5gs/hnet/curve25519-5.key
+      - id: 6
+        scheme: 2
+        key: @sysconfdir@/open5gs/hnet/secp256r1-6.key
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.1.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.1.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#      - addr: ::1
+#
+#  o SBI Client(https://scp.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - name: scp.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fb::1]:80)
+#    If prefer_ipv4 is true, http://127.0.1.10:80 is selected.
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr:
+#        - 127.0.1.10
+#        - fd69:f21d:873c:fb::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#
+scp:
+    sbi:
+      - addr: 127.0.1.10
+        port: 7777
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - addr: 127.0.0.10
+#      - addr: ::1
+#
+#  o SBI Client(https://nrf.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#nrf:
+#    sbi:
+#      - addr:
+#          - 127.0.0.10
+#          - ::1
+#        port: 7777
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:
+
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#    (Default values are used, so no configuration is required)
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#  time:
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+time:

configs/open5gs/udr.yaml.in

@@ -0,0 +1,444 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/udr.log
+
+#
+#  o TLS enable/disable
+#  sbi:
+#    server|client:
+#      no_tls: false|true
+#    - false: (Default) Use TLS
+#    - true:  TLS disabled
+#
+#  o Verification enable/disable
+#  sbi:
+#    server|client:
+#      no_verify: false|true
+#    - false: (Default) Verify the PEER
+#    - true:  Skip the verification step
+#
+#  o Server-side does not use TLS
+#  sbi:
+#    server:
+#      no_tls: true
+#
+#  o Client-side skips the verification step
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#
+#  o Use the specified certificate while verifying the client
+#  sbi:
+#    server
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+#  o Use the specified certificate while verifying the server
+#  sbi:
+#    client
+#      cacert: /etc/open5gs/tls/ca.crt
+#
+sbi:
+    server:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/udr.key
+      cert: @sysconfdir@/open5gs/tls/udr.crt
+    client:
+      no_tls: true
+      cacert: @sysconfdir@/open5gs/tls/ca.crt
+      key: @sysconfdir@/open5gs/tls/udr.key
+      cert: @sysconfdir@/open5gs/tls/udr.crt
+
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#
+#  o SBI Server(http://<any address>:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address available>:443)
+#  sbi:
+#    server:
+#      key: /etc/open5gs/tls/bsf.key
+#      cert: /etc/open5gs/tls/bsf.crt
+#  bsf:
+#    sbi:
+#
+#  o SBI Server(https://127.0.0.15:443, https://[::1]:443) without verification
+#  sbi:
+#    server:
+#      no_verify: true
+#      key: /etc/open5gs/tls/bsf.key
+#      cert: /etc/open5gs/tls/bsf.crt
+#  bsf:
+#    sbi:
+#      - addr: 127.0.0.15
+#      - addr: ::1
+#
+#  o SBI Server(https://bsf.open5gs.org:443)
+#    Use the specified certificate while verifying the client
+#
+#  sbi:
+#    server:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/bsf.key
+#      cert: /etc/open5gs/tls/bsf.crt
+#  bsf:
+#    sbi:
+#      - name: bsf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.15:7777)
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - addr: 127.0.0.15
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-bsf.svc.local
+#
+#  o Another example of advertising on NRF
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  bsf:
+#    sbi:
+#      addr: 127.0.0.15
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#
+#  <NF Service>
+#
+#  o NF Service Name(Default : all NF services available)
+#  udr:
+#    service_name:
+#
+#  o NF Service Name(Only some NF services are available)
+#  udr:
+#    service_name:
+#      - nudr-dr
+#
+#  <NF Discovery Query Parameter>
+#
+#  o (Default) If you do not set Query Parameter as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  udr:
+#    sbi:
+#      - addr: 127.0.0.20
+#        port: 7777
+#
+#    - 'service-names' is included.
+#
+#  o Service-Names are not included
+#  sbi:
+#    server:
+#      no_tls: true
+#  udr:
+#    sbi:
+#      - addr: 127.0.0.20
+#        port: 7777
+#    discovery:
+#      option:
+#        no_service_names: false
+#
+#  o To remove 'service-names' from URI query parameters in NS Discovery
+#         no_service_names: true
+#
+#    * For Indirect Communication with Delegated Discovery,
+#      'service-names' is always included in the URI query parameter.
+#    * That is, 'no_service_names' has no effect.
+#
+#  <For Indirect Communication with Delegated Discovery>
+#
+#  o (Default) If you do not set Delegated Discovery as shown below,
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  udr:
+#    sbi:
+#      - addr: 127.0.0.20
+#        port: 7777
+#
+#    - Use SCP if SCP avaiable. Otherwise NRF is used.
+#      => App fails if both NRF and SCP are unavailable.
+#
+#  sbi:
+#    server:
+#      no_tls: true
+#  udr:
+#    sbi:
+#      - addr: 127.0.0.20
+#        port: 7777
+#    discovery:
+#      delegated: auto
+#
+#  o To use SCP always => App fails if no SCP available.
+#      delegated: yes
+#
+#  o Don't use SCP server => App fails if no NRF available.
+#      delegated: no
+#
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.1.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.1.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - addr: 127.0.1.10
+#      - addr: ::1
+#
+#  o SBI Client(https://scp.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  scp:
+#    sbi:
+#      - name: scp.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fb::1]:80)
+#    If prefer_ipv4 is true, http://127.0.1.10:80 is selected.
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr:
+#        - 127.0.1.10
+#        - fd69:f21d:873c:fb::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  scp:
+#    sbi:
+#      addr: 127.0.1.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#
+scp:
+    sbi:
+      - addr: 127.0.1.10
+        port: 7777
+
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, https://[::1]:443) without verification
+#  sbi:
+#    client:
+#      no_verify: true
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - addr: 127.0.0.10
+#      - addr: ::1
+#
+#  o SBI Client(https://nrf.open5gs.org:443)
+#    Use the specified certificate while verifying the server
+#
+#  sbi:
+#    client:
+#      cacert: /etc/open5gs/tls/ca.crt
+#      key: /etc/open5gs/tls/amf.key
+#      cert: /etc/open5gs/tls/amf.crt
+#  nrf:
+#    sbi:
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fd69:f21d:873c:fa::1
+#
+#  o SBI Option (Default)
+#    - tcp_nodelay : true
+#    - so_linger.l_onoff : false
+#
+#  sbi:
+#    client:
+#      no_tls: true
+#  nrf:
+#    sbi:
+#      addr: 127.0.0.10
+#      option:
+#        tcp_nodelay: false
+#        so_linger:
+#          l_onoff: true
+#          l_linger: 10
+#
+#nrf:
+#    sbi:
+#      - addr:
+#          - 127.0.0.10
+#          - ::1
+#        port: 7777
+
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+#  o Maximum Number of UE
+#  max:
+#    ue: 1024
+#
+#  o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+#  max:
+#    peer: 64
+#
+max:
+
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#    (Default values are used, so no configuration is required)
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#  time:
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+time:

configs/open5gs/upf.yaml.in

@@ -0,0 +1,257 @@
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Default values are used, so no configuration is required)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#  logger:
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#  logger:
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#  logger:
+#    level: trace
+#    domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/upf.log
+
+#
+#  <PFCP Server>
+#
+#  o PFCP Server(127.0.0.7:8805, ::1:8805)
+#  upf:
+#    pfcp:
+#      - addr: 127.0.0.7
+#      - addr: ::1
+#
+#  o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+#  upf:
+#    pfcp:
+#      name: localhost
+#
+#  o PFCP Option (Default)
+#    - so_bindtodevice : NULL
+#
+#  upf:
+#    pfcp:
+#      addr: 127.0.0.7
+#      option:
+#        so_bindtodevice: vrf-blue
+#
+#  o Provide custom PFCP address to be advertised to SMF in PFCP association
+#      request/respond
+#  upf:
+#    pfcp:
+#      - addr: 0.0.0.0
+#        advertise: open5gs-smf.svc.local
+#
+#  <GTP-U Server>>
+#
+#  o GTP-U Server(127.0.0.7:2152, [::1]:2152)
+#  upf:
+#    gtpu:
+#      - addr: 127.0.0.7
+#      - addr: ::1
+#
+#  o GTP-U Server(127.0.0.1:2152, [::1]:2152)
+#  upf:
+#    gtpu:
+#      name: localhost
+#
+#  o User Plane IP Resource information
+#  upf:
+#    gtpu:
+#      - addr:
+#        - 127.0.0.7
+#        - ::1
+#        teid_range_indication: 4
+#        teid_range: 10
+#        network_instance: internet
+#        source_interface: 0
+#      - addr: 127.0.10.4
+#        teid_range_indication: 4
+#        teid_range: 5
+#        network_instance: ims
+#        source_interface: 1
+#
+#  o Provide custom UPF GTP-U address to be advertised inside NGAP messages
+#  upf:
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise: 172.24.15.30
+#
+#  upf:
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise:
+#        - 127.0.0.1
+#        - ::1
+#
+#  upf:
+#    gtpu:
+#      - addr: 10.4.128.21
+#        advertise: upf1.5gc.mnc001.mcc001.3gppnetwork.org
+#
+#  upf:
+#    gtpu:
+#      - dev: ens3
+#        advertise: upf1.5gc.mnc001.mcc001.3gppnetwork.org
+#
+#  o GTP-U Option (Default)
+#    - so_bindtodevice : NULL
+#
+#  upf:
+#    gtpu:
+#      addr: 127.0.0.7
+#      option:
+#        so_bindtodevice: vrf-blue
+#
+#  <Subnet for UE network>
+#
+#  Note that you need to setup your UE network using TUN device.
+#  (ogstun, ogstun2, ogstunX, ..)
+#
+#  o IPv4 Pool
+#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#
+#  upf:
+#    subnet:
+#      addr: 10.45.0.1/16
+#
+#  o IPv4/IPv6 Pool
+#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#    $ sudo ip addr add 2001:db8:cafe::1/48 dev ogstun
+#
+#  upf:
+#    subnet:
+#      - addr: 10.45.0.1/16
+#      - addr: 2001:db8:cafe::1/48
+#
+#
+#  o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, 2001:db8:babe::1/48
+#    All other APNs use 10.45.0.1/16, 2001:db8:cafe::1/48
+#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#    $ sudo ip addr add 10.46.0.1/16 dev ogstun
+#    $ sudo ip addr add 2001:db8:cafe::1/48 dev ogstun
+#    $ sudo ip addr add 2001:db8:babe::1/48 dev ogstun
+#
+#    ; If the UE has unknown DNN/APN(not internet/ims), SMF/UPF will crash.
+#
+#  upf:
+#    subnet:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: 2001:db8:cafe::1/48
+#        dnn: internet
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#      - addr: 2001:db8:babe::1/48
+#        dnn: ims
+#
+#  o Specific DNN/APN with the FALLBACK SUBNET(10.47.0.1/16)
+#    ; Note that put the FALLBACK SUBNET last to avoid SMF/UPF crash.
+#
+#  upf:
+#    subnet:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#      - addr: 10.50.0.1/16 ## FALLBACK SUBNET
+#
+#  o Multiple Devices (default: ogstun)
+#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#    $ sudo ip addr add 2001:db8:cafe::1/48 dev ogstun2
+#    $ sudo ip addr add 10.46.0.1/16 dev ogstun3
+#    $ sudo ip addr add 2001:db8:babe::1/48 dev ogstun3
+#
+#  upf:
+#    subnet:
+#      - addr: 10.45.0.1/16
+#        dnn: internet
+#      - addr: 2001:db8:cafe::1/48
+#        dnn: internet
+#        dev: ogstun2
+#      - addr: 10.46.0.1/16
+#        dnn: ims
+#        dev: ogstun3
+#      - addr: 2001:db8:babe::1/48
+#        dnn: ims
+#        dev: ogstun3
+#
+#  <Metrics Server>
+#
+#  o Metrics Server(http://<any address>:9090)
+#  upf:
+#    metrics:
+#    - addr: 0.0.0.0
+#      port: 9090
+#
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:db8:cafe::1/48
+    metrics:
+      - addr: 127.0.0.7
+        port: 9090
+
+#
+#  <PFCP Client>>
+#
+#  o PFCP Client(127.0.0.4:8805)
+#  smf:
+#    pfcp:
+#      addr: 127.0.0.4
+#
+smf:
+
+#
+#  o Number of output streams per SCTP associations.
+#  parameter:
+#    sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#  parameter:
+#    no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#  parameter:
+#    no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#  parameter:
+#    prefer_ipv4: true
+#
+parameter:
+
+#
+# o Maximum Number of UE
+# max:
+#   ue: 1024
+#
+# o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+# max:
+#   peer: 64
+#
+max:
+
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#    (Default values are used, so no configuration is required)
+#
+#  o Message Wait Duration (3000 ms)
+#  time:
+#    message:
+#        duration: 3000
+time:

configs/sample.yaml.in

@@ -0,0 +1,299 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+sbi:
+    server:
+      no_tls: true
+      cacert: @build_configs_dir@/open5gs/tls/ca.crt
+      key: @build_configs_dir@/open5gs/tls/testserver.key
+      cert: @build_configs_dir@/open5gs/tls/testserver.crt
+    client:
+      no_tls: true
+      cacert: @build_configs_dir@/open5gs/tls/ca.crt
+      key: @build_configs_dir@/open5gs/tls/testclient.key
+      cert: @build_configs_dir@/open5gs/tls/testclient.crt
+
+parameter:
+#    no_nrf: true
+#    no_scp: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+#    use_mongodb_change_stream: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    metrics:
+      addr: 127.0.0.2
+      port: 9090
+    gummei:
+      plmn_id:
+        mcc: 999
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 999
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    metrics:
+      addr: 127.0.0.4
+      port: 9090
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:db8:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+
+#
+#  <For Indirect Communication with Delegated Discovery>
+#
+#  o (Default) If you do not set Delegated Discovery as shown below,
+#
+#    sbi:
+#      - addr: 127.0.0.5
+#        port: 7777
+#
+#    - Use SCP if SCP avaiable. Otherwise NRF is used.
+#      => App fails if both NRF and SCP are unavailable.
+#
+#    sbi:
+#      - addr: 127.0.0.5
+#        port: 7777
+#    discovery:
+#      delegated: auto
+#
+#  o To use SCP always => App fails if no SCP available.
+#      delegated: yes
+#
+#  o Don't use SCP server => App fails if no NRF available.
+#      delegated: no
+#
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    metrics:
+      addr: 127.0.0.5
+      port: 9090
+    guami:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        amf_id:
+          region: 2
+          set: 1
+    tai:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        s_nssai:
+          - sst: 1
+    security:
+        integrity_order : [ NIA2, NIA1, NIA0 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:db8:cafe::1/48
+    metrics:
+      - addr: 127.0.0.7
+        port: 9090
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+scp:
+    sbi:
+      - addr: 127.0.1.10
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    hnet:
+      - id: 1
+        scheme: 1
+        key: @build_configs_dir@/open5gs/hnet/curve25519-1.key
+      - id: 2
+        scheme: 2
+        key: @build_configs_dir@/open5gs/hnet/secp256r1-2.key
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+    metrics:
+      - addr: 127.0.0.13
+        port: 9090
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: 127.0.0.10
+        port: 7777
+        s_nssai:
+          sst: 1
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777
+
+time:
+  t3512:
+    value: 540     # 9 mintues * 60 = 540 seconds

configs/slice.yaml.in

@@ -0,0 +1,268 @@
+db_uri: mongodb://localhost/open5gs
+
+logger:
+
+sbi:
+    server:
+      no_tls: true
+      cacert: @build_configs_dir@/open5gs/tls/ca.crt
+      key: @build_configs_dir@/open5gs/tls/testserver.key
+      cert: @build_configs_dir@/open5gs/tls/testserver.crt
+    client:
+      no_tls: true
+      cacert: @build_configs_dir@/open5gs/tls/ca.crt
+      key: @build_configs_dir@/open5gs/tls/testclient.key
+      cert: @build_configs_dir@/open5gs/tls/testclient.crt
+
+parameter:
+#    no_nrf: true
+    no_scp: true
+#    no_amf: true
+#    no_smf: true
+#    no_upf: true
+#    no_ausf: true
+#    no_udm: true
+#    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
+#    no_udr: true
+#    no_mme: true
+#    no_sgwc: true
+#    no_sgwu: true
+#    no_pcrf: true
+#    no_hss: true
+#    use_mongodb_change_stream: true
+
+mme:
+    freeDiameter:
+      identity: mme.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.2
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: hss.localdomain
+          addr: 127.0.0.8
+
+    s1ap:
+      - addr: 127.0.0.2
+    gtpc:
+      - addr: 127.0.0.2
+    gummei:
+      plmn_id:
+        mcc: 999
+        mnc: 70
+      mme_gid: 2
+      mme_code: 1
+    tai:
+      plmn_id:
+        mcc: 999
+        mnc: 70
+      tac: 1
+    security:
+        integrity_order : [ EIA2, EIA1, EIA0 ]
+        ciphering_order : [ EEA0, EEA1, EEA2 ]
+
+    network_name:
+        full: Open5GS
+
+sgwc:
+    gtpc:
+      - addr: 127.0.0.3
+    pfcp:
+      - addr: 127.0.0.3
+
+smf:
+    sbi:
+      - addr: 127.0.0.4
+        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:db8:cafe::1/48
+    dns:
+      - 8.8.8.8
+      - 8.8.4.4
+      - 2001:4860:4860::8888
+      - 2001:4860:4860::8844
+    mtu: 1400
+    freeDiameter:
+      identity: smf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.4
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: pcrf.localdomain
+          addr: 127.0.0.9
+amf:
+    sbi:
+      - addr: 127.0.0.5
+        port: 7777
+    ngap:
+      - addr: 127.0.0.5
+    guami:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        amf_id:
+          region: 202
+          set: 1016
+    tai:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        tac: 1
+    plmn_support:
+      - plmn_id:
+          mcc: 999
+          mnc: 70
+        s_nssai:
+          - sst: 1
+          - sst: 1
+            sd: 000080
+          - sst: 1
+            sd: 009000
+    security:
+        integrity_order : [ NIA2, NIA1 ]
+        ciphering_order : [ NEA0, NEA1, NEA2 ]
+    network_name:
+        full: Open5GS
+    amf_name: open5gs-amf0
+
+sgwu:
+    pfcp:
+      - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
+
+upf:
+    pfcp:
+      - addr: 127.0.0.7
+    gtpu:
+      - addr: 127.0.0.7
+    subnet:
+      - addr: 10.45.0.1/16
+      - addr: 2001:db8:cafe::1/48
+    metrics:
+      - addr: 127.0.0.7
+        port: 9090
+
+hss:
+    freeDiameter:
+      identity: hss.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.8
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: mme.localdomain
+          addr: 127.0.0.2
+pcrf:
+    freeDiameter:
+      identity: pcrf.localdomain
+      realm: localdomain
+      listen_on: 127.0.0.9
+      no_fwd: true
+      load_extension:
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dbg_msg_dumps.fdx
+          conf: 0x8888
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_rfc5777.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_mip6i.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nasreq.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_nas_mipv6.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca.fdx
+        - module: @build_subprojects_freeDiameter_extensions_dir@/dict_dcca_3gpp/dict_dcca_3gpp.fdx
+      connect:
+        - identity: smf.localdomain
+          addr: 127.0.0.4
+
+nrf:
+    sbi:
+      - addr:
+        - 127.0.0.10
+        - ::1
+        port: 7777
+
+ausf:
+    sbi:
+      - addr: 127.0.0.11
+        port: 7777
+
+udm:
+    sbi:
+      - addr: 127.0.0.12
+        port: 7777
+
+pcf:
+    sbi:
+      - addr: 127.0.0.13
+        port: 7777
+    metrics:
+      - addr: 127.0.0.13
+        port: 9090
+
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+      - addr: 127.0.0.19
+        port: 7777
+        s_nssai:
+          sst: 1
+          sd: 000080
+      - addr: 127.0.0.10
+        port: 7777
+        s_nssai:
+          sst: 1
+          sd: 009000
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+udr:
+    sbi:
+      - addr: 127.0.0.20
+        port: 7777
+
+time:
+  t3512:
+    value: 540     # 9 mintues * 60 = 540 seconds