Release v2.3.0

commit 183d8b8344122f25f77be79b1b698c71f48c1656
Author: Sukchan Lee <acetcom@gmail.com>
Date:   Fri May 28 23:44:26 2021 +0900

    [SMF] introduce new list API [#1019]

    Sometimes we may need two lists for same node.
    To do this, I created a new list API, and applied it this pull request.

.gitignore

@@ -1,3 +1,5 @@
 # This directory is fetched during first build and is present in this directory
 subprojects/freeDiameter
 subprojects/usrsctp
+
+webui/.next

README.md

@@ -11,6 +11,7 @@ If you find Open5GS useful for work, please consider supporting this Open Source
     <img width="260px" src="https://open5gs.org/assets/img/nextepc_logo.jpg">
   </a>
       </td>
+      <td width="20px"></td>
       <td align="center" valign="middle">
   <a href="https://sdr.eee.strath.ac.uk/" target="_blank">
     <img width="260px" src="https://open5gs.org/assets/img/strath.png">
@@ -24,19 +25,31 @@ If you find Open5GS useful for work, please consider supporting this Open Source
 <table>
   <tbody>
     <tr>
-      <td align="center" valign="middle">
+      <td align="center" valign="middle" height="100px" width="222px">
         <a href="https://www.auctionsoftware.com/" target="_blank">
-          <img width="222px" src="https://open5gs.org/assets/img/asLogonew.png">
+          <img src="https://open5gs.org/assets/img/asLogonew.png">
         </a>
       </td>
-      <td align="center" valign="middle">
+      <td align="center" valign="middle" height="100px" width="222px">
         <a href="https://www.wearetriple.com/" target="_blank">
-          <img width="222px" src="https://open5gs.org/assets/img/triple_logo.png">
+          <img src="https://open5gs.org/assets/img/triple_logo.png">
         </a>
       </td>
-      <td align="center" valign="middle">
+      <td align="center" valign="middle" height="100px" width="222px">
         <a href="https://www.accessparks.com/" target="_blank">
-          <img width="222px" src="https://open5gs.org/assets/img/AccessParks.png">
+          <img src="https://open5gs.org/assets/img/AccessParks.png">
+        </a>
+      </td>
+    </tr>
+    <tr>
+      <td align="center" valign="middle" height="100px" width="222px">
+        <a href="https://skylarkwireless.com/" target="_blank">
+          <img src="https://open5gs.org/assets/img/SkylarkWireless-420x78-Web2-R.png">
+        </a>
+      </td>
+      <td align="center" valign="middle" height="100px" width="222px">
+        <a href="https://sysmocom.de/" target="_blank">
+          <img src="https://open5gs.org/assets/img/sysmocom-logo.png">
         </a>
       </td>
     </tr>

configs/310014.yaml.in

@@ -10,6 +10,8 @@ parameter:
 #    no_ausf: true
 #    no_udm: true
 #    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
 #    no_udr: true
 #    no_mme: true
 #    no_sgwc: true
@@ -67,14 +69,17 @@ smf:
     sbi:
       - addr: 127.0.0.4
         port: 7777
+    pfcp:
+      - addr: 127.0.0.4
     gtpc:
       - addr: 127.0.0.4
       - addr: ::1
-    pfcp:
+    gtpu:
       - addr: 127.0.0.4
-    pdn:
+      - addr: ::1
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
     dns:
       - 8.8.8.8
       - 8.8.4.4
@@ -129,19 +134,19 @@ amf:
     amf_name: open5gs-amf0
 
 sgwu:
-    gtpu:
-      - addr: 127.0.0.6
     pfcp:
       - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
 
 upf:
     pfcp:
       - addr: 127.0.0.7
     gtpu:
       - addr: 127.0.0.7
-    pdn:
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
 
 hss:
     freeDiameter:
@@ -200,6 +205,21 @@ pcf:
       - addr: 127.0.0.13
         port: 7777
 
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
 udr:
     sbi:
       - addr: 127.0.0.20

configs/csfb.yaml.in

@@ -10,6 +10,8 @@ parameter:
 #    no_ausf: true
 #    no_udm: true
 #    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
 #    no_udr: true
 #    no_mme: true
 #    no_sgwc: true
@@ -101,14 +103,17 @@ smf:
 #    sbi:
 #      - addr: 127.0.0.4
 #        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
     gtpc:
       - addr: 127.0.0.4
       - addr: ::1
-    pfcp:
+    gtpu:
       - addr: 127.0.0.4
-    pdn:
+      - addr: ::1
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
     dns:
       - 8.8.8.8
       - 8.8.4.4
@@ -163,19 +168,19 @@ amf:
     amf_name: open5gs-amf0
 
 sgwu:
-    gtpu:
-      - addr: 127.0.0.6
     pfcp:
       - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
 
 upf:
     pfcp:
       - addr: 127.0.0.7
     gtpu:
       - addr: 127.0.0.7
-    pdn:
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
 
 hss:
     freeDiameter:
@@ -234,6 +239,21 @@ pcf:
       - addr: 127.0.0.13
         port: 7777
 
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
 udr:
     sbi:
       - addr: 127.0.0.20

configs/meson.build

@@ -39,7 +39,7 @@ example_conf = '''
     csfb.yaml
     volte.yaml
     vonr.yaml
-    minimal.yaml
+    slice.yaml
     srslte.yaml
     sample.yaml
 '''.split()

configs/open5gs/amf.yaml.in

@@ -37,7 +37,7 @@ logger:
 #
 #  o SBI Server(https://<all address avaiable>:443)
 #    sbi:
-#        tls:
+#      - tls:
 #          key: amf.key
 #          pem: amf.pem
 #
@@ -51,7 +51,7 @@ logger:
 #
 #  o SBI Server(http://amf.open5gs.org:80)
 #    sbi:
-#      name: amf.open5gs.org
+#      - name: amf.open5gs.org
 #
 #  o SBI Server(http://127.0.0.5:7777)
 #    sbi:
@@ -60,7 +60,18 @@ logger:
 #
 #  o SBI Server(http://<eth0 IP address>:80)
 #    sbi:
-#      dev: eth0
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-amf.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
 #
 #  <NGAP Server>>
 #
@@ -143,7 +154,7 @@ logger:
 #          mnc: 70
 #        s_nssai:
 #          - sst: 1
-#          - sd: 010000
+#            sd: 010000
 #      - plmn_id:
 #          mcc: 901
 #          mnc: 70
@@ -160,6 +171,10 @@ logger:
 #
 #    amf_name: amf1.open5gs.amf.5gc.mnc70.mcc901.3gppnetwork.org
 #
+#  <Relative Capacity> - Default(255)
+#
+#    relative_capacity: 100
+#
 amf:
     sbi:
       - addr: 127.0.0.5
@@ -227,9 +242,6 @@ nrf:
 #
 # parameter:
 #
-#  o Number of output streams per SCTP associations.
-#      sctp_streams: 30
-#
 #  o Disable use of IPv4 addresses (only IPv6)
 #      no_ipv4: true
 #
@@ -239,12 +251,6 @@ nrf:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
-#
 parameter:
 
 #
@@ -264,7 +270,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -272,7 +278,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512
@@ -281,6 +287,27 @@ max:
 #
 pool:
 
+#
+# sockopt:
+#    no_delay : true
+#
+sockopt:
+
+#
+# sctp:
+#    heartbit_interval : 5000 (5secs)
+#    sack_delay : 200 (200ms)
+#    rto_initial : 3000 (3secs)
+#    rto_min : 1000 (1sec)
+#    rto_max : 5000 (5secs)
+#    max_num_of_ostreams : 30
+#    max_num_of_istreams : 65535
+#    max_attempts : 4
+#    max_initial_timeout : 8000(8secs)
+#    usrsctp_udp_port : 9899
+#
+sctp:
+
 #
 # time:
 #
@@ -300,4 +327,12 @@ pool:
 #  o Message Wait Duration (3000 ms)
 #    message:
 #        duration: 3000
+#
+#  o Handover Wait Duration (Default : 300 ms)
+#    Time to wait for AMF to send UEContextReleaseCommand
+#    to the source gNB after receiving HandoverNotify
+#
+#  o Handover Wait Duration (500ms)
+#    handover:
+#        duration: 500
 time:

configs/open5gs/ausf.yaml.in

@@ -37,7 +37,7 @@ logger:
 #
 #  o SBI Server(https://<all address avaiable>:443)
 #    sbi:
-#        tls:
+#      - tls:
 #          key: ausf.key
 #          pem: ausf.pem
 #
@@ -51,7 +51,7 @@ logger:
 #
 #  o SBI Server(http://ausf.open5gs.org:80)
 #    sbi:
-#      name: ausf.open5gs.org
+#      - name: ausf.open5gs.org
 #
 #  o SBI Server(http://127.0.0.11:7777)
 #    sbi:
@@ -60,7 +60,18 @@ logger:
 #
 #  o SBI Server(http://<eth0 IP address>:80)
 #    sbi:
-#      dev: eth0
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-ausf.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
 #
 ausf:
     sbi:
@@ -115,12 +126,6 @@ nrf:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
-#
 parameter:
 
 #
@@ -140,7 +145,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -148,7 +153,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512

configs/open5gs/bsf.yaml.in

@@ -0,0 +1,186 @@
+db_uri: mongodb://localhost/open5gs
+
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,bsf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/bsf.log
+#
+# bsf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#      - tls:
+#          key: bsf.key
+#          pem: bsf.pem
+#
+#  o SBI Server(https://127.0.0.15:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.15
+#        tls:
+#          key: bsf.key
+#          pem: bsf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://bsf.open5gs.org:80)
+#    sbi:
+#      - name: bsf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.15:7777)
+#    sbi:
+#      - addr: 127.0.0.15
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-bsf.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fe80::1%@loopback_devname@]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fe80::1%@loopback_devname@
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/hss.yaml.in

@@ -41,12 +41,6 @@ hss:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
-#
 parameter:
 
 #
@@ -66,7 +60,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -74,7 +68,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512

configs/open5gs/meson.build

@@ -33,6 +33,8 @@ open5gs_conf = '''
     udm.yaml
     udr.yaml
     pcf.yaml
+    nssf.yaml
+    bsf.yaml
 '''.split()
 
 foreach file : open5gs_conf

configs/open5gs/mme.yaml.in

@@ -201,6 +201,10 @@ logger:
 #
 #    mme_name: open5gs-mme0
 #
+#  <Relative Capacity> - Default(255)
+#
+#    relative_capacity: 100
+#
 mme:
     freeDiameter: @sysconfdir@/freeDiameter/mme.conf
     s1ap:
@@ -331,9 +335,6 @@ smf:
 #
 # parameter:
 #
-#  o Number of output streams per SCTP associations.
-#      sctp_streams: 30
-#
 #  o Disable use of IPv4 addresses (only IPv6)
 #      no_ipv4: true
 #
@@ -343,12 +344,6 @@ smf:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
-#
 #  o Use OAI UE
 #    - Remove HashMME in Security-mode command message
 #    - Use the length 1 of EPS network feature support in Attach accept message
@@ -373,7 +368,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -381,7 +376,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512
@@ -391,17 +386,23 @@ max:
 pool:
 
 #
-# sctp:
+# sockopt:
+#    no_delay : true
 #
-#  o heartbit_interval : 5000 (5secs)
-#  o rto_initial : 3000 (3secs)
-#  o rto_min : 1000 (1sec)
-#  o rto_max : 5000 (5secs)
-#  o max_num_of_ostreams : 30
-#  o max_num_of_istreams : 65535
-#  o max_attempts : 4
-#  o max_initial_timeout : 8000(8secs)
-#  o usrsctp_udp_port : 9899
+sockopt:
+
+#
+# sctp:
+#    heartbit_interval : 5000 (5secs)
+#    sack_delay : 200 (200ms)
+#    rto_initial : 3000 (3secs)
+#    rto_min : 1000 (1sec)
+#    rto_max : 5000 (5secs)
+#    max_num_of_ostreams : 30
+#    max_num_of_istreams : 65535
+#    max_attempts : 4
+#    max_initial_timeout : 8000(8secs)
+#    usrsctp_udp_port : 9899
 #
 sctp:
 
@@ -413,4 +414,12 @@ sctp:
 #  o Message Wait Duration (3000 ms)
 #    message:
 #        duration: 3000
+#
+#  o Handover Wait Duration (Default : 300 ms)
+#    Time to wait for MME to send UEContextReleaseCommand
+#    to the source eNB after receiving HandoverNotify
+#
+#  o Handover Wait Duration (500ms)
+#    handover:
+#        duration: 500
 time:

configs/open5gs/nrf.yaml.in

@@ -87,12 +87,6 @@ nrf:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
-#
 parameter:
 
 #
@@ -112,7 +106,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -120,7 +114,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512

configs/open5gs/nssf.yaml.in

@@ -0,0 +1,234 @@
+#
+# logger:
+#
+#  o Set OGS_LOG_INFO to all domain level
+#   - If `level` is omitted, the default level is OGS_LOG_INFO)
+#   - If `domain` is omitted, the all domain level is set from 'level'
+#    (Nothing is needed)
+#
+#  o Set OGS_LOG_ERROR to all domain level
+#   - `level` can be set with none, fatal, error, warn, info, debug, trace
+#    level: error
+#
+#  o Set OGS_LOG_DEBUG to mme/emm domain level
+#    level: debug
+#    domain: mme,emm
+#
+#  o Set OGS_LOG_TRACE to all domain level
+#    level: trace
+#    domain: core,sbi,nssf,event,tlv,mem,sock
+#
+logger:
+    file: @localstatedir@/log/open5gs/nssf.log
+#
+# nssf:
+#
+#  <SBI Server>
+#
+#  o SBI Server(http://<all address available>:80)
+#    sbi:
+#
+#  o SBI Server(http://<any address>:80)
+#    sbi:
+#      - addr:
+#          - 0.0.0.0
+#          - ::0
+#        port: 7777
+#
+#  o SBI Server(https://<all address avaiable>:443)
+#    sbi:
+#      - tls:
+#          key: nssf.key
+#          pem: nssf.pem
+#
+#  o SBI Server(https://127.0.0.14:443, http://[::1]:80)
+#    sbi:
+#      - addr: 127.0.0.14
+#        tls:
+#          key: nssf.key
+#          pem: nssf.pem
+#      - addr: ::1
+#
+#  o SBI Server(http://nssf.open5gs.org:80)
+#    sbi:
+#      - name: nssf.open5gs.org
+#
+#  o SBI Server(http://127.0.0.14:7777)
+#    sbi:
+#      - addr: 127.0.0.14
+#        port: 7777
+#
+#  o SBI Server(http://<eth0 IP address>:80)
+#    sbi:
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-nssf.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
+#
+#  <List of avaiable Network Slice Instance(NSI)>
+#
+#  o One NSI
+#   - NRF[http://::1:7777/nnrf-nfm/v1/nf-instances]
+#     NSSAI[SST:1]
+#
+#    nsi:
+#      - addr: ::1
+#        port: 7777
+#        s_nssai:
+#          sst: 1
+#
+#  o Three NSI
+#   1. NRF[http://::1:7777/nnrf-nfm/v1/nf-instances]
+#      S-NSSAI[SST:1]
+#
+#   2. NRF[http://127.0.0.19:7777/nnrf-nfm/v1/nf-instances]
+#      NSSAI[SST:1, SD:000080]
+#
+#   2. NRF[http://127.0.0.10:7777/nnrf-nfm/v1/nf-instances]
+#      NSSAI[SST:1, SD:009000]
+#
+#    nsi:
+#      - addr: ::1
+#        port: 7777
+#        s_nssai:
+#          sst: 1
+#      - addr: 127.0.0.19
+#        port: 7777
+#        s_nssai:
+#          sst: 1
+#          sd: 000080
+#      - addr: 127.0.0.10
+#        port: 7777
+#        s_nssai:
+#          sst: 1
+#          sd: 009000
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+
+#
+# nrf:
+#
+#  <SBI Client>>
+#
+#  o SBI Client(http://127.0.0.10:7777)
+#    sbi:
+#      addr: 127.0.0.10
+#      port: 7777
+#
+#  o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+#    sbi:
+#      - addr: 127.0.0.10
+#        tls:
+#          key: nrf.key
+#          pem: nrf.pem
+#      - name: nrf.open5gs.org
+#
+#  o SBI Client(http://[fe80::1%@loopback_devname@]:80)
+#    If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+#    sbi:
+#      addr:
+#        - 127.0.0.10
+#        - fe80::1%@loopback_devname@
+#
+nrf:
+    sbi:
+      - addr:
+          - 127.0.0.10
+          - ::1
+        port: 7777
+
+#
+# parameter:
+#
+#  o Number of output streams per SCTP associations.
+#      sctp_streams: 30
+#
+#  o Disable use of IPv4 addresses (only IPv6)
+#      no_ipv4: true
+#
+#  o Disable use of IPv6 addresses (only IPv4)
+#      no_ipv6: true
+#
+#  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+#      prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+#    ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+#    gnb: 32
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+#   To connect more UEs, you need to increase the size further.
+#
+#   - Pool-size 128         => 65536 Number
+#   - Pool-size 256         => 16384 Number
+#   - Pool-size 512         => 4096 Number
+#   - Pool-size 1024        => 1024 Number
+#   - Pool-size 2048        => 512 Number
+#   - Pool-size 8192        => 128 Number
+#   - Pool-size 1024*1024   => 8 Number
+#
+#    128:  65536
+#    256:  16384
+#    512:  4096
+#    1024: 1024
+#    2048: 512
+#    8192: 128
+#    big:  8
+#
+pool:
+
+#
+# time:
+#
+#  o NF Instance Heartbeat (Default : 0)
+#    NFs will not send heart-beat timer in NFProfile
+#    NRF will send heart-beat timer in NFProfile
+#
+#  o NF Instance Heartbeat (20 seconds)
+#    NFs will send heart-beat timer (20 seconds) in NFProfile
+#    NRF can change heart-beat timer in NFProfile
+#
+#    nf_instance:
+#      heartbeat: 20
+#
+#  o NF Instance Heartbeat (Disabled)
+#    nf_instance:
+#      heartbeat: 0
+#
+#  o NF Instance Heartbeat (10 seconds)
+#    nf_instance:
+#      heartbeat: 10
+#
+#  o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+#  o Message Wait Duration (3000 ms)
+#    message:
+#        duration: 3000
+time:

configs/open5gs/pcf.yaml.in

@@ -39,7 +39,7 @@ logger:
 #
 #  o SBI Server(https://<all address avaiable>:443)
 #    sbi:
-#        tls:
+#      - tls:
 #          key: pcf.key
 #          pem: pcf.pem
 #
@@ -53,7 +53,7 @@ logger:
 #
 #  o SBI Server(http://pcf.open5gs.org:80)
 #    sbi:
-#      name: pcf.open5gs.org
+#      - name: pcf.open5gs.org
 #
 #  o SBI Server(http://127.0.0.13:7777)
 #    sbi:
@@ -62,7 +62,18 @@ logger:
 #
 #  o SBI Server(http://<eth0 IP address>:80)
 #    sbi:
-#      dev: eth0
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-pcf.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
 #
 pcf:
     sbi:
@@ -117,12 +128,6 @@ nrf:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
-#
 parameter:
 
 #
@@ -142,7 +147,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -150,7 +155,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512

configs/open5gs/pcrf.yaml.in

@@ -40,14 +40,9 @@ pcrf:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
-#
 #  o Legacy support for pre-release LTE 11 devices to do calling
-#    - Replace IPv4/v6 local addr field in AAR Media-Subcomponent AVP by any
+#    - Replace IPv4/v6 local addr field in AAR Media-Subcomponent AVP
+#      by 'any local port'
 #      no_ipv4v6_local_addr_in_packet_filter: true
 #
 parameter:
@@ -69,7 +64,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -77,7 +72,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512

configs/open5gs/sgwc.yaml.in

@@ -45,6 +45,10 @@ logger:
 #      - addr: 127.0.0.3
 #      - addr: ::1
 #
+#  o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+#    pfcp:
+#      name: localhost
+#
 sgwc:
     gtpc:
       - addr: 127.0.0.3
@@ -63,15 +67,10 @@ sgwc:
 #
 #  <SGWU_SELECTION_MODE - EPC only>
 #
-# o Round-Robin
-#   (note that round robin can be disabled for a particular node
-#     by setting flag 'rr' to 0)
-#
 #  sgwu:
 #    pfcp:
 #      - addr: 127.0.0.6
 #      - addr: 127.0.0.12
-#        rr: 0
 #      - addr: 127.0.0.18
 #
 # o SGWU selection by eNodeB TAC
@@ -122,11 +121,8 @@ sgwu:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
+#  o Disable selection of SGW-U PFCP in Round-Robin manner
+#      no_pfcp_rr_select: true
 #
 parameter:
 
@@ -147,7 +143,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -155,7 +151,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512

configs/open5gs/sgwu.yaml.in

@@ -24,16 +24,23 @@ logger:
 #
 # sgwu:
 #
-#  <GTP-U Server>
+#  <PFCP Server>
 #
-#  o GTP-U Server(all address available)
-#    gtpu:
+#  o PFCP Server(127.0.0.6:8805, ::1:8805)
+#    pfcp:
+#      - addr: 127.0.0.6
+#      - addr: ::1
+#
+#  o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+#    pfcp:
+#      - name: localhost
+#
+#  <GTP-U Server>
 #
 #  o GTP-U Server(127.0.0.6:2152, [::1]:2152)
 #    gtpu:
-#      - addr:
-#        - 127.0.0.6
-#        - ::1
+#      - addr: 127.0.0.6
+#      - addr: ::1
 #
 #  o GTP-U Server(127.0.0.1:2152, [::1]:2152)
 #    gtpu:
@@ -57,44 +64,37 @@ logger:
 #  o Provide custom SGW-U GTP-U address to be advertised inside S1AP messages
 #    gtpu:
 #      - addr: 10.4.128.21
-#        advertise_addr: 172.24.15.30
+#        advertise: 172.24.15.30
 #
 #    gtpu:
 #      - addr: 10.4.128.21
-#        advertise_addr:
+#        advertise:
 #        - 127.0.0.1
 #        - ::1
 #
 #    gtpu:
 #      - addr: 10.4.128.21
-#        advertise_name: sgw1.epc.mnc001.mcc001.3gppnetwork.org
+#        advertise: sgw1.epc.mnc001.mcc001.3gppnetwork.org
 #
 #    gtpu:
 #      - dev: ens3
-#        advertise_name: sgw1.epc.mnc001.mcc001.3gppnetwork.org
-#
-#  <PFCP Server>
-#
-#  o PFCP Server(127.0.0.6:8805, ::1:8805)
-#    pfcp:
-#      - addr: 127.0.0.6
-#      - addr: ::1
+#        advertise: sgw1.epc.mnc001.mcc001.3gppnetwork.org
 #
 sgwu:
-    gtpu:
-      - addr: 127.0.0.6
     pfcp:
       - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
 
 #
 # sgwc:
 #
 #  <PFCP Client>>
 #
-#  o PFCP Client(127.0.0.6:8805)
+#  o PFCP Client(127.0.0.3:8805)
 #
 #    pfcp:
-#      addr: 127.0.0.6
+#      addr: 127.0.0.3
 #
 sgwc:
 
@@ -113,12 +113,6 @@ sgwc:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
-#
 parameter:
 
 #
@@ -138,7 +132,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -146,7 +140,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512

configs/open5gs/smf.yaml.in

@@ -37,7 +37,7 @@ logger:
 #
 #  o SBI Server(https://<all address avaiable>:443)
 #    sbi:
-#        tls:
+#      - tls:
 #          key: smf.key
 #          pem: smf.pem
 #
@@ -51,7 +51,7 @@ logger:
 #
 #  o SBI Server(http://smf.open5gs.org:80)
 #    sbi:
-#      name: smf.open5gs.org
+#      - name: smf.open5gs.org
 #
 #  o SBI Server(http://127.0.0.4:7777)
 #    sbi:
@@ -60,7 +60,18 @@ logger:
 #
 #  o SBI Server(http://<eth0 IP address>:80)
 #    sbi:
-#      dev: eth0
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-smf.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
 #
 #  <PFCP Server>
 #
@@ -69,6 +80,10 @@ logger:
 #      - addr: 127.0.0.4
 #      - addr: ::1
 #
+#  o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+#    pfcp:
+#      name: localhost
+#
 #  <GTP-C Server>
 #
 #  o GTP-C Server(127.0.0.4:2123, [fe80::3%@loopback_devname@]:2123)
@@ -83,74 +98,78 @@ logger:
 #      - addr: 127.0.0.4
 #      - addr: fe80::3%@loopback_devname@
 #
-#  <PDN Configuration with UE Pool>
+#  <GTP-U Server>>
+#
+#  o GTP-U Server(127.0.0.4:2152, [::1]:2152)
+#    gtpu:
+#      - addr: 127.0.0.4
+#      - addr: ::1
+#
+#  o GTP-U Server(127.0.0.1:2152, [::1]:2152)
+#    gtpu:
+#      name: localhost
+#
+#  <Subnet for UE Pool>
 #
 #  o IPv4 Pool
-#    pdn:
+#    subnet:
 #      addr: 10.45.0.1/16
 #
 #  o IPv4/IPv6 Pool
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/16
-#      - addr: cafe:1::1/64
+#      - addr: 2001:230:cafe::1/48
 #
 #
-#  o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, cafe:2::1/64
-#    pdn:
+#  o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, 2001:230:babe::1/48
+#
+#    subnet:
 #      - addr: 10.45.0.1/16
 #        dnn: internet
-#      - addr: cafe:1::1/64
+#      - addr: 2001:230:cafe::1/48
 #        dnn: internet
 #      - addr: 10.46.0.1/16
 #        dnn: ims
-#      - addr: cafe:2::1/64
+#      - addr: 2001:230:babe::1/48
 #        dnn: ims
 #
-#  o Multiple Devices (default: ogstun)
-#    pdn:
-#      - addr: 10.45.0.1/16
-#        dnn: internet
-#      - addr: cafe:1::1/64
-#        dnn: internet
-#        dev: ogstun2
-#      - addr: 10.46.0.1/16
-#        dnn: ims
-#        dev: ogstun3
-#      - addr: cafe:2::1/64
-#        dnn: ims
-#        dev: ogstun3
-#
 #  o Pool Range Sample
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/24
 #        range: 10.45.0.100-10.45.0.200
 #
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/24
 #        range:
 #          - 10.45.0.5-10.45.0.50
 #          - 10.45.0.100-
 #
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/24
 #        range:
 #          - -10.45.0.200
 #          - 10.45.0.210-10.45.0.220
 #
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/16
 #        range:
 #          - 10.45.0.100-10.45.0.200
 #          - 10.45.1.100-10.45.1.200
-#      - addr: cafe::1/64
+#      - addr: 2001:230:cafe::1/48
 #        range:
-#          - cafe::a0-cafe:b0
-#          - cafe::c0-cafe:d0
+#          - 2001:230:cafe:a0::0-2001:230:cafe:b0::0
+#          - 2001:230:cafe:c0::0-2001:230:cafe:d0::0
 #
 #  <Domain Name Server>
 #
 #  o Primary/Secondary can be configured. Others are ignored.
 #
+#    dns:
+#      - 8.8.8.8
+#      - 8.8.4.4
+#      - 2001:4860:4860::8888
+#      - 2001:4860:4860::8844
+#
 #  <MTU Size>
 #
 #  o Provisioning a limit on the size of the packets sent by the MS
@@ -167,19 +186,152 @@ logger:
 #      - 127.0.0.1
 #      - ::1
 #
+#  <SMF Selection - 5G Core only>
+#  1. SMF sends SmfInfo(S-NSSAI, DNN, TAI) to the NRF
+#  2. NRF responds to AMF with SmfInfo during NF-Discovery.
+#  3. AMF selects SMF based on S-NSSAI, DNN and TAI in SmfInfo.
+#
+#  Note that if there is no SmfInfo, any AMF can select this SMF.
+#
+#  o S-NSSAI[SST:1] and DNN[internet] - At least 1 DNN is required in S-NSSAI
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            dnn:
+#              - internet
+#
+#  o S-NSSAI[SST:1 SD:009000] and DNN[internet or ims]
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            sd: 009000
+#            dnn:
+#              - internet
+#              - ims
+#
+#  o S-NSSAI[SST:1] and DNN[internet] and TAI[PLMN-ID:90170 TAC:1]
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            tac: 1
+#
+#  o If any of conditions below are met:
+#   - S-NSSAI[SST:1] and DNN[internet] and TAI[PLMN-ID:90170 TAC:1-9]
+#   - S-NSSAI[SST:2 SD:000080] and DNN[internet or ims]
+#   - S-NSSAI[SST:4] and DNN[internet] and TAI[PLMN-ID:90170 TAC:10-20,30-40]
+#
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            range:
+#              - 1-9
+#      - s_nssai:
+#          - sst: 2
+#            sd: 000080
+#            dnn:
+#              - internet
+#              - ims
+#      - s_nssai:
+#          - sst: 4
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            range:
+#              - 10-20
+#              - 30-40
+#
+#  o Complex Example
+#    info:
+#      - s_nssai:
+#          - sst: 1
+#            dnn:
+#              - internet
+#          - sst: 1
+#            sd: 000080
+#            dnn:
+#              - internet
+#              - ims
+#          - sst: 1
+#            sd: 009000
+#            dnn:
+#              [internet, ims]
+#          - sst: 2
+#            dnn:
+#              - internet
+#          - sst: 3
+#            sd: 123456
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            tac: [1, 2, 3]
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            tac: 4
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            tac:
+#              - 5
+#              - 6
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            range:
+#              - 100-200
+#              - 300-400
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            range:
+#              - 500-600
+#              - 700-800
+#              - 900-1000
+#      - s_nssai:
+#          - sst: 4
+#            dnn:
+#              - internet
+#        tai:
+#          - plmn_id:
+#              mcc: 901
+#              mnc: 70
+#            tac: 99
+# 
+
 smf:
     sbi:
       - addr: 127.0.0.4
         port: 7777
-    gtpc:
-      - addr: 127.0.0.4
-      - addr: ::1
     pfcp:
       - addr: 127.0.0.4
       - addr: ::1
-    pdn:
+    gtpc:
+      - addr: 127.0.0.4
+      - addr: ::1
+    gtpu:
+      - addr: 127.0.0.4
+      - addr: ::1
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
     dns:
       - 8.8.8.8
       - 8.8.4.4
@@ -231,10 +383,10 @@ nrf:
 #    pfcp:
 #      addr: 127.0.0.7
 #
-#  <UPF_SELECTION_MODE - EPC only>
+#  <UPF Selection>
 #
-# o Round-Robin
-#   (note that round robin can be disabled for a particular node
+#  o Round-Robin
+#    (note that round robin can be disabled for a particular node
 #     by setting flag 'rr' to 0)
 #
 #  upf:
@@ -244,8 +396,8 @@ nrf:
 #        rr: 0
 #      - addr: 127.0.0.19
 #
-# o UPF selection by eNodeB TAC
-#   (either single TAC or multiple TACs, DECIMAL representation)
+#  o UPF selection by eNodeB TAC
+#    (either single TAC or multiple TACs, DECIMAL representation)
 #
 #  upf:
 #    pfcp:
@@ -254,7 +406,7 @@ nrf:
 #      - addr: 127.0.0.12
 #        tac: [3,5,8]
 #
-# o UPF selection by UE's DNN/APN (either single DNN/APN or multiple DNNs/APNs)
+#  o UPF selection by UE's DNN/APN (either single DNN/APN or multiple DNNs/APNs)
 #
 #  upf:
 #    pfcp:
@@ -263,8 +415,8 @@ nrf:
 #      - addr: 127.0.0.12
 #        dnn: [internet, web]
 #
-# o UPF selection by CellID(e_cell_id: 28bit, nr_cell_id: 36bit)
-#   (either single enb_id or multiple enb_ids, HEX representation)
+#  o UPF selection by CellID(e_cell_id: 28bit, nr_cell_id: 36bit)
+#    (either single enb_id or multiple enb_ids, HEX representation)
 #
 #  upf:
 #    pfcp:
@@ -292,11 +444,8 @@ upf:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
+#  o Disable selection of UPF PFCP in Round-Robin manner
+#      no_pfcp_rr_select: true
 #
 parameter:
 
@@ -317,7 +466,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -325,7 +474,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512
@@ -353,4 +502,13 @@ pool:
 #  o Message Wait Duration (3000 ms)
 #    message:
 #        duration: 3000
+#
+#  o Handover Wait Duration (Default : 300 ms)
+#    Time to wait for SMF to send
+#    PFCP Session Modification Request(Remove Indirect Tunnel) to the UPF
+#    after sending Nsmf_PDUSession_UpdateSMContext Response(hoState:COMPLETED)
+#
+#  o Handover Wait Duration (500ms)
+#    handover:
+#        duration: 500
 time:

configs/open5gs/udm.yaml.in

@@ -37,7 +37,7 @@ logger:
 #
 #  o SBI Server(https://<all address avaiable>:443)
 #    sbi:
-#        tls:
+#      - tls:
 #          key: udm.key
 #          pem: udm.pem
 #
@@ -51,7 +51,7 @@ logger:
 #
 #  o SBI Server(http://udm.open5gs.org:80)
 #    sbi:
-#      name: udm.open5gs.org
+#      - name: udm.open5gs.org
 #
 #  o SBI Server(http://127.0.0.12:7777)
 #    sbi:
@@ -60,7 +60,18 @@ logger:
 #
 #  o SBI Server(http://<eth0 IP address>:80)
 #    sbi:
-#      dev: eth0
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-udm.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
 #
 udm:
     sbi:
@@ -115,12 +126,6 @@ nrf:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
-#
 parameter:
 
 #
@@ -140,7 +145,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -148,7 +153,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512

configs/open5gs/udr.yaml.in

@@ -39,7 +39,7 @@ logger:
 #
 #  o SBI Server(https://<all address avaiable>:443)
 #    sbi:
-#        tls:
+#      - tls:
 #          key: udr.key
 #          pem: udr.pem
 #
@@ -53,7 +53,7 @@ logger:
 #
 #  o SBI Server(http://udr.open5gs.org:80)
 #    sbi:
-#      name: udr.open5gs.org
+#      - name: udr.open5gs.org
 #
 #  o SBI Server(http://127.0.0.20:7777)
 #    sbi:
@@ -62,7 +62,18 @@ logger:
 #
 #  o SBI Server(http://<eth0 IP address>:80)
 #    sbi:
-#      dev: eth0
+#      - dev: eth0
+#
+#  o Provide custom SBI address to be advertised to NRF
+#    sbi:
+#      - dev: eth0
+#        advertise: open5gs-udr.svc.local
+#
+#    sbi:
+#      - addr: localhost
+#        advertise:
+#          - 127.0.0.99
+#          - ::1
 #
 udr:
     sbi:
@@ -117,12 +128,6 @@ nrf:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
-#
 parameter:
 
 #
@@ -142,7 +147,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -150,7 +155,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512

configs/open5gs/upf.yaml.in

@@ -31,16 +31,16 @@ logger:
 #      - addr: 127.0.0.7
 #      - addr: ::1
 #
-#  <GTP-U Server>>
+#  o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+#    pfcp:
+#      name: localhost
 #
-#  o GTP-U Server(all address available)
-#    gtpu:
+#  <GTP-U Server>>
 #
 #  o GTP-U Server(127.0.0.7:2152, [::1]:2152)
 #    gtpu:
-#      - addr:
-#        - 127.0.0.7
-#        - ::1
+#      - addr: 127.0.0.7
+#      - addr: ::1
 #
 #  o GTP-U Server(127.0.0.1:2152, [::1]:2152)
 #    gtpu:
@@ -64,121 +64,96 @@ logger:
 #  o Provide custom UPF GTP-U address to be advertised inside NGAP messages
 #    gtpu:
 #      - addr: 10.4.128.21
-#        advertise_addr: 172.24.15.30
+#        advertise: 172.24.15.30
 #
 #    gtpu:
 #      - addr: 10.4.128.21
-#        advertise_addr:
+#        advertise:
 #        - 127.0.0.1
 #        - ::1
 #
 #    gtpu:
 #      - addr: 10.4.128.21
-#        advertise_name: upf1.5gc.mnc001.mcc001.3gppnetwork.org
+#        advertise: upf1.5gc.mnc001.mcc001.3gppnetwork.org
 #
 #    gtpu:
 #      - dev: ens3
-#        advertise_name: upf1.5gc.mnc001.mcc001.3gppnetwork.org
+#        advertise: upf1.5gc.mnc001.mcc001.3gppnetwork.org
 #
+#  <Subnet for UE network>
 #
-#  <PDN Configuration with UE Pool>
+#  Note that you need to setup your UE network using TUN device.
+#  (ogstun, ogstun2, ogstunX, ..)
 #
 #  o IPv4 Pool
 #    $ sudo ip addr add 10.45.0.1/16 dev ogstun
 #
-#    pdn:
+#    subnet:
 #      addr: 10.45.0.1/16
 #
 #  o IPv4/IPv6 Pool
 #    $ sudo ip addr add 10.45.0.1/16 dev ogstun
-#    $ sudo ip addr add cafe:1::1/64 dev ogstun
+#    $ sudo ip addr add 2001:230:cafe::1/48 dev ogstun
 #
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/16
-#      - addr: cafe:1::1/64
+#      - addr: 2001:230:cafe::1/48
 #
 #
-#  o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, cafe:2::1/64
-#    All other APNs use 10.45.0.1/16, cafe:1::1/64
+#  o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, 2001:230:babe::1/48
+#    All other APNs use 10.45.0.1/16, 2001:230:cafe::1/48
 #    $ sudo ip addr add 10.45.0.1/16 dev ogstun
 #    $ sudo ip addr add 10.46.0.1/16 dev ogstun
-#    $ sudo ip addr add cafe:1::1/64 dev ogstun
-#    $ sudo ip addr add cafe:2::1/64 dev ogstun
+#    $ sudo ip addr add 2001:230:cafe::1/48 dev ogstun
+#    $ sudo ip addr add 2001:230:babe::1/48 dev ogstun
 #
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/16
 #        dnn: internet
-#      - addr: cafe:1::1/64
+#      - addr: 2001:230:cafe::1/48
 #        dnn: internet
 #      - addr: 10.46.0.1/16
 #        dnn: ims
-#      - addr: cafe:2::1/64
+#      - addr: 2001:230:babe::1/48
 #        dnn: ims
 #
 #  o Multiple Devices (default: ogstun)
 #    $ sudo ip addr add 10.45.0.1/16 dev ogstun
-#    $ sudo ip addr add cafe:1::1/64 dev ogstun2
+#    $ sudo ip addr add 2001:230:cafe::1/48 dev ogstun2
 #    $ sudo ip addr add 10.46.0.1/16 dev ogstun3
-#    $ sudo ip addr add cafe:2::1/64 dev ogstun3
+#    $ sudo ip addr add 2001:230:babe::1/48 dev ogstun3
 #
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/16
 #        dnn: internet
-#      - addr: cafe:1::1/64
+#      - addr: 2001:230:cafe::1/48
 #        dnn: internet
 #        dev: ogstun2
 #      - addr: 10.46.0.1/16
 #        dnn: ims
 #        dev: ogstun3
-#      - addr: cafe:2::1/64
+#      - addr: 2001:230:babe::1/48
 #        dnn: ims
 #        dev: ogstun3
 #
-#  o Pool Range Sample
-#    pdn:
-#      - addr: 10.45.0.1/24
-#        range: 10.45.0.100-10.45.0.200
-#
-#    pdn:
-#      - addr: 10.45.0.1/24
-#        range:
-#          - 10.45.0.5-10.45.0.50
-#          - 10.45.0.100-
-#
-#    pdn:
-#      - addr: 10.45.0.1/24
-#        range:
-#          - -10.45.0.200
-#          - 10.45.0.210-10.45.0.220
-#
-#    pdn:
-#      - addr: 10.45.0.1/16
-#        range:
-#          - 10.45.0.100-10.45.0.200
-#          - 10.45.1.100-10.45.1.200
-#      - addr: cafe::1/64
-#        range:
-#          - cafe::a0-cafe:b0
-#          - cafe::c0-cafe:d0
-#
 upf:
     pfcp:
       - addr: 127.0.0.7
     gtpu:
       - addr: 127.0.0.7
-    pdn:
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
 
 #
 # smf:
 #
 #  <PFCP Client>>
 #
-#  o PFCP Client(127.0.0.3:8805)
+#  o PFCP Client(127.0.0.4:8805)
 #
 #    pfcp:
-#      addr: 127.0.0.3
+#      addr: 127.0.0.4
 #
 smf:
 
@@ -197,13 +172,6 @@ smf:
 #  o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
 #      prefer_ipv4: true
 #
-#  o Enable Multicast traffic to the UE
-#      multicast: true
-#
-#  o Disable Stateless Address Autoconfiguration for IPv6
-#      no_slaac: true
-#
-#
 parameter:
 
 #
@@ -223,7 +191,7 @@ max:
 #   To connect more UEs, you need to increase the size further.
 #
 #   - Pool-size 128         => 65536 Number
-#   - Pool-size 256         => 8192 Number
+#   - Pool-size 256         => 16384 Number
 #   - Pool-size 512         => 4096 Number
 #   - Pool-size 1024        => 1024 Number
 #   - Pool-size 2048        => 512 Number
@@ -231,7 +199,7 @@ max:
 #   - Pool-size 1024*1024   => 8 Number
 #
 #    128:  65536
-#    256:  8192
+#    256:  16384
 #    512:  4096
 #    1024: 1024
 #    2048: 512

configs/sample.yaml.in

@@ -10,6 +10,8 @@ parameter:
 #    no_ausf: true
 #    no_udm: true
 #    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
 #    no_udr: true
 #    no_mme: true
 #    no_sgwc: true
@@ -67,14 +69,17 @@ smf:
     sbi:
       - addr: 127.0.0.4
         port: 7777
+    pfcp:
+      - addr: 127.0.0.4
     gtpc:
       - addr: 127.0.0.4
       - addr: ::1
-    pfcp:
+    gtpu:
       - addr: 127.0.0.4
-    pdn:
+      - addr: ::1
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
     dns:
       - 8.8.8.8
       - 8.8.4.4
@@ -129,19 +134,19 @@ amf:
     amf_name: open5gs-amf0
 
 sgwu:
-    gtpu:
-      - addr: 127.0.0.6
     pfcp:
       - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
 
 upf:
     pfcp:
       - addr: 127.0.0.7
     gtpu:
       - addr: 127.0.0.7
-    pdn:
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
 
 hss:
     freeDiameter:
@@ -200,6 +205,20 @@ pcf:
       - addr: 127.0.0.13
         port: 7777
 
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
 udr:
     sbi:
       - addr: 127.0.0.20

configs/slice.yaml.in

@@ -10,6 +10,8 @@ parameter:
 #    no_ausf: true
 #    no_udm: true
 #    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
 #    no_udr: true
 #    no_mme: true
 #    no_sgwc: true
@@ -67,14 +69,17 @@ smf:
     sbi:
       - addr: 127.0.0.4
         port: 7777
+    pfcp:
+      - addr: 127.0.0.4
     gtpc:
       - addr: 127.0.0.4
       - addr: ::1
-    pfcp:
+    gtpu:
       - addr: 127.0.0.4
-    pdn:
+      - addr: ::1
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
     dns:
       - 8.8.8.8
       - 8.8.4.4
@@ -105,25 +110,26 @@ amf:
       - addr: 127.0.0.5
     guami:
       - plmn_id:
-          mcc: 208
-          mnc: 93
+          mcc: 901
+          mnc: 70
         amf_id:
           region: 202
           set: 1016
     tai:
       - plmn_id:
-          mcc: 208
-          mnc: 93
+          mcc: 901
+          mnc: 70
         tac: 1
     plmn_support:
       - plmn_id:
-          mcc: 208
-          mnc: 93
+          mcc: 901
+          mnc: 70
         s_nssai:
           - sst: 1
-            sd: 010203
           - sst: 1
-            sd: 112233
+            sd: 000080
+          - sst: 1
+            sd: 009000
     security:
         integrity_order : [ NIA2, NIA1 ]
         ciphering_order : [ NEA0, NEA1, NEA2 ]
@@ -132,19 +138,19 @@ amf:
     amf_name: open5gs-amf0
 
 sgwu:
-    gtpu:
-      - addr: 127.0.0.6
     pfcp:
       - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
 
 upf:
     pfcp:
       - addr: 127.0.0.7
     gtpu:
       - addr: 127.0.0.7
-    pdn:
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
 
 hss:
     freeDiameter:
@@ -203,6 +209,31 @@ pcf:
       - addr: 127.0.0.13
         port: 7777
 
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+      - addr: 127.0.0.19
+        port: 7777
+        s_nssai:
+          sst: 1
+          sd: 000080
+      - addr: 127.0.0.10
+        port: 7777
+        s_nssai:
+          sst: 1
+          sd: 009000
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
 udr:
     sbi:
       - addr: 127.0.0.20

configs/srslte.yaml.in

@@ -10,6 +10,8 @@ parameter:
 #    no_ausf: true
 #    no_udm: true
 #    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
 #    no_udr: true
 #    no_mme: true
 #    no_sgwc: true
@@ -67,14 +69,17 @@ smf:
 #    sbi:
 #      - addr: 127.0.0.4
 #        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
     gtpc:
       - addr: 127.0.0.4
       - addr: ::1
-    pfcp:
+    gtpu:
       - addr: 127.0.0.4
-    pdn:
+      - addr: ::1
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
     dns:
       - 8.8.8.8
       - 8.8.4.4
@@ -129,19 +134,19 @@ amf:
     amf_name: open5gs-amf0
 
 sgwu:
-    gtpu:
-      - addr: 127.0.0.6
     pfcp:
       - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
 
 upf:
     pfcp:
       - addr: 127.0.0.7
     gtpu:
       - addr: 127.0.0.7
-    pdn:
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
 
 hss:
     freeDiameter:
@@ -200,6 +205,21 @@ pcf:
       - addr: 127.0.0.13
         port: 7777
 
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
 udr:
     sbi:
       - addr: 127.0.0.20

configs/systemd/99-open5gs.network

@@ -3,4 +3,4 @@ Name=ogstun
 
 [Network]
 Address=10.45.0.1/16
-Address=cafe::1/64
+Address=2001:230:cafe::1/48

configs/systemd/meson.build

@@ -28,6 +28,8 @@ systemd_conf_in = '''
     open5gs-ausfd.service
     open5gs-udmd.service
     open5gs-pcfd.service
+    open5gs-nssfd.service
+    open5gs-bsfd.service
     open5gs-udrd.service
 '''.split()
 

configs/systemd/open5gs-bsfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS BSF Daemon
+Wants=mongodb.service mongod.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-bsfd -c @sysconfdir@/open5gs/bsf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-nrfd.service.in

@@ -1,6 +1,6 @@
 [Unit]
 Description=Open5GS NRF Daemon
-After=networking.service
+Wants=mongodb.service mongod.service
 
 [Service]
 Type=simple

configs/systemd/open5gs-nssfd.service.in

@@ -0,0 +1,18 @@
+[Unit]
+Description=Open5GS NSSF Daemon
+After=networking.service
+
+[Service]
+Type=simple
+
+User=open5gs
+Group=open5gs
+
+Restart=always
+ExecStart=@bindir@/open5gs-nssfd -c @sysconfdir@/open5gs/nssf.yaml
+RestartSec=2
+RestartPreventExitStatus=1
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

configs/systemd/open5gs-pcfd.service.in

@@ -1,6 +1,6 @@
 [Unit]
 Description=Open5GS PCF Daemon
-After=networking.service
+Wants=mongodb.service mongod.service
 
 [Service]
 Type=simple

configs/systemd/open5gs-udrd.service.in

@@ -1,6 +1,6 @@
 [Unit]
 Description=Open5GS UDR Daemon
-After=networking.service
+Wants=mongodb.service mongod.service
 
 [Service]
 Type=simple

configs/volte.yaml.in

@@ -10,6 +10,8 @@ parameter:
 #    no_ausf: true
 #    no_udm: true
 #    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
 #    no_udr: true
 #    no_mme: true
 #    no_sgwc: true
@@ -67,14 +69,17 @@ smf:
 #    sbi:
 #      - addr: 127.0.0.4
 #        port: 7777
+    pfcp:
+      - addr: 127.0.0.4
     gtpc:
       - addr: 127.0.0.4
       - addr: ::1
-    pfcp:
+    gtpu:
       - addr: 127.0.0.4
-    pdn:
+      - addr: ::1
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
     dns:
       - 8.8.8.8
       - 8.8.4.4
@@ -132,19 +137,19 @@ amf:
     amf_name: open5gs-amf0
 
 sgwu:
-    gtpu:
-      - addr: 127.0.0.6
     pfcp:
       - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
 
 upf:
     pfcp:
       - addr: 127.0.0.7
     gtpu:
       - addr: 127.0.0.7
-    pdn:
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
 
 hss:
     freeDiameter:
@@ -163,6 +168,8 @@ hss:
       connect:
         - identity: mme.localdomain
           addr: 127.0.0.2
+        - identity: ims.localdomain
+          addr: 127.0.0.1
 pcrf:
     freeDiameter:
       identity: pcrf.localdomain
@@ -180,7 +187,7 @@ pcrf:
       connect:
         - identity: smf.localdomain
           addr: 127.0.0.4
-        - identity: pcscf.localdomain
+        - identity: ims.localdomain
           addr: 127.0.0.1
 
 #nrf:
@@ -205,6 +212,21 @@ pcf:
       - addr: 127.0.0.13
         port: 7777
 
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
 udr:
     sbi:
       - addr: 127.0.0.20

configs/vonr.yaml.in

@@ -10,6 +10,8 @@ parameter:
 #    no_ausf: true
 #    no_udm: true
 #    no_pcf: true
+#    no_nssf: true
+#    no_bsf: true
 #    no_udr: true
 #    no_mme: true
 #    no_sgwc: true
@@ -67,14 +69,17 @@ smf:
     sbi:
       - addr: 127.0.0.4
         port: 7777
+    pfcp:
+      - addr: 127.0.0.4
     gtpc:
       - addr: 127.0.0.4
       - addr: ::1
-    pfcp:
+    gtpu:
       - addr: 127.0.0.4
-    pdn:
+      - addr: ::1
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
     dns:
       - 8.8.8.8
       - 8.8.4.4
@@ -132,19 +137,19 @@ amf:
     amf_name: open5gs-amf0
 
 sgwu:
-    gtpu:
-      - addr: 127.0.0.6
     pfcp:
       - addr: 127.0.0.6
+    gtpu:
+      - addr: 127.0.0.6
 
 upf:
     pfcp:
       - addr: 127.0.0.7
     gtpu:
       - addr: 127.0.0.7
-    pdn:
+    subnet:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
 
 hss:
     freeDiameter:
@@ -205,6 +210,26 @@ pcf:
       - addr: 127.0.0.13
         port: 7777
 
+nssf:
+    sbi:
+      - addr: 127.0.0.14
+        port: 7777
+    nsi:
+      - addr: ::1
+        port: 7777
+        s_nssai:
+          sst: 1
+
+bsf:
+    sbi:
+      - addr: 127.0.0.15
+        port: 7777
+
+af:
+    sbi:
+      - addr: 127.0.0.16
+        port: 7777
+
 udr:
     sbi:
       - addr: 127.0.0.20

debian/changelog

@@ -1,3 +1,285 @@
+open5gs (2.3.0) unstable; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Tue, 08 Jun 2021 21:19:10 +0900
+
+open5gs (2.3.0~focal) focal; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Tue, 08 Jun 2021 21:18:10 +0900
+
+open5gs (2.3.0~bionic) bionic; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Tue, 08 Jun 2021 21:16:53 +0900
+
+open5gs (2.3.0~hirsute) hirsute; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Tue, 08 Jun 2021 21:15:17 +0900
+
+open5gs (2.2.9) unstable; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Wed, 19 May 2021 14:12:49 +0900
+
+open5gs (2.2.9~hirsute1) hirsute; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Wed, 19 May 2021 14:11:46 +0900
+
+open5gs (2.2.9~bionic1) bionic; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Wed, 19 May 2021 14:10:51 +0900
+
+open5gs (2.2.9~focal1) focal; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Wed, 19 May 2021 14:09:29 +0900
+
+open5gs (2.2.9~hirsute) hirsute; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Wed, 19 May 2021 14:06:05 +0900
+
+open5gs (2.2.9~bionic) bionic; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Wed, 19 May 2021 13:32:46 +0900
+
+open5gs (2.2.9~focal) focal; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Wed, 19 May 2021 13:31:08 +0900
+
+open5gs (2.2.8) unstable; urgency=medium
+
+  * Security Protection
+
+ -- Sukchan Lee <acetcom@gmail.com>  Sun, 09 May 2021 11:23:01 +0900
+
+open5gs (2.2.8~bionic) bionic; urgency=medium
+
+  * Security Protection
+
+ -- Sukchan Lee <acetcom@gmail.com>  Sun, 09 May 2021 11:22:02 +0900
+
+open5gs (2.2.8~focal) focal; urgency=medium
+
+  * Security Protection
+
+ -- Sukchan Lee <acetcom@gmail.com>  Sun, 09 May 2021 11:20:13 +0900
+
+open5gs (2.2.7) unstable; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Fri, 30 Apr 2021 14:20:47 +0900
+
+open5gs (2.2.7~focal3) focal; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Fri, 30 Apr 2021 14:19:39 +0900
+
+open5gs (2.2.7~bionic3) bionic; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Fri, 30 Apr 2021 14:17:11 +0900
+
+open5gs (2.2.6) unstable; urgency=medium
+
+  * HSS Cx Added
+
+ -- Sukchan Lee <acetcom@gmail.com>  Fri, 09 Apr 2021 21:10:43 +0900
+
+open5gs (2.2.6~bionic) bionic; urgency=medium
+
+  * HSS Cx Added
+
+ -- Sukchan Lee <acetcom@gmail.com>  Fri, 09 Apr 2021 21:09:14 +0900
+
+open5gs (2.2.6~focal) focal; urgency=medium
+
+  * HSS Cx Added
+
+ -- Sukchan Lee <acetcom@gmail.com>  Fri, 09 Apr 2021 21:07:19 +0900
+
+open5gs (2.2.5) unstable; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Sat, 03 Apr 2021 14:16:23 +0900
+
+open5gs (2.2.5~bionic) bionic; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Sat, 03 Apr 2021 14:14:53 +0900
+
+open5gs (2.2.5~focal) focal; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Sat, 03 Apr 2021 14:13:33 +0900
+
+open5gs (2.2.4) unstable; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Thu, 01 Apr 2021 16:45:22 +0900
+
+open5gs (2.2.4~bionic) bionic; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Thu, 01 Apr 2021 16:43:54 +0900
+
+open5gs (2.2.4~focal) focal; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Thu, 01 Apr 2021 16:42:31 +0900
+
+open5gs (2.2.3) unstable; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Mon, 29 Mar 2021 22:44:54 +0900
+
+open5gs (2.2.3~bionic) bionic; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Mon, 29 Mar 2021 22:43:54 +0900
+
+open5gs (2.2.3~focal) focal; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Mon, 29 Mar 2021 22:42:53 +0900
+
+open5gs (2.2.2) unstable; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Fri, 19 Mar 2021 21:48:13 +0900
+
+open5gs (2.2.2~bionic) bionic; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Fri, 19 Mar 2021 21:47:12 +0900
+
+open5gs (2.2.2~focal) focal; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Fri, 19 Mar 2021 21:45:47 +0900
+
+open5gs (2.2.1) unstable; urgency=medium
+
+  * UE IPv6 Support
+
+ -- Sukchan Lee <acetcom@gmail.com>  Mon, 15 Mar 2021 10:06:16 +0900
+
+open5gs (2.2.1~bionic) bionic; urgency=medium
+
+  * UE IPv6 Support
+
+ -- Sukchan Lee <acetcom@gmail.com>  Mon, 15 Mar 2021 10:05:00 +0900
+
+open5gs (2.2.1~focal) focal; urgency=medium
+
+  * UE IPv6 Support
+
+ -- Sukchan Lee <acetcom@gmail.com>  Mon, 15 Mar 2021 10:03:39 +0900
+
+open5gs (2.2.0) unstable; urgency=medium
+
+  * DB Schame Changes
+
+ -- Sukchan Lee <acetcom@gmail.com>  Mon, 08 Mar 2021 21:31:35 +0900
+
+open5gs (2.2.0~bionic) bionic; urgency=medium
+
+  * DB Schame Changes
+
+ -- Sukchan Lee <acetcom@gmail.com>  Mon, 08 Mar 2021 21:30:31 +0900
+
+open5gs (2.2.0~focal) focal; urgency=medium
+
+  * DB Schame Changes
+
+ -- Sukchan Lee <acetcom@gmail.com>  Mon, 08 Mar 2021 21:29:03 +0900
+
+open5gs (2.1.7) unstable; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Mon, 08 Feb 2021 22:27:23 -0500
+
+open5gs (2.1.7~bionic) bionic; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Mon, 08 Feb 2021 22:26:08 -0500
+
+open5gs (2.1.7~focal) focal; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Mon, 08 Feb 2021 22:23:55 -0500
+
+open5gs (2.1.6) unstable; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Thu, 04 Feb 2021 09:18:13 -0500
+
+open5gs (2.1.6~bionic1) bionic; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Thu, 04 Feb 2021 09:17:04 -0500
+
+open5gs (2.1.6~focal1) focal; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Thu, 04 Feb 2021 09:14:17 -0500
+
+open5gs (2.1.5) unstable; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Tue, 02 Feb 2021 14:47:59 -0500
+
+open5gs (2.1.5~bionic) bionic; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Tue, 02 Feb 2021 14:46:57 -0500
+
+open5gs (2.1.5~focal) focal; urgency=medium
+
+  * Bug Fixed
+
+ -- Sukchan Lee <acetcom@gmail.com>  Tue, 02 Feb 2021 14:45:48 -0500
+
 open5gs (2.1.4) unstable; urgency=medium
 
   * Paging was added

debian/control

@@ -20,6 +20,7 @@ Build-Depends: debhelper (>= 11),
                libmicrohttpd-dev,
                libcurl4-gnutls-dev,
                libnghttp2-dev,
+               libtins-dev,
 Standards-Version: 4.3.0
 Rules-Requires-Root: no
 Homepage: https://open5gs.org
@@ -199,6 +200,30 @@ Description: PCF (Policy Control Function)
  .
  This package provides the PCF (Policy Control Function)
 
+Package: open5gs-nssf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: NSSF (Network Slice Selection Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the NSSF (Network Slice Selection Function)
+
+Package: open5gs-bsf
+Architecture: any
+Multi-Arch: same
+Depends: ${shlibs:Depends},
+         ${misc:Depends},
+         open5gs-common (= ${binary:Version})
+Description: PCF (Policy Control Function)
+ Open5GS is a C-language implementation of 5G Core and EPC
+ Packet Core, i.e. the core network of an NR/LTE network (Release-16)
+ .
+ This package provides the BSF (Binding Support Function)
+
 Package: open5gs-udr
 Architecture: any
 Multi-Arch: same
@@ -228,6 +253,8 @@ Depends: ${misc:Depends},
          open5gs-ausf (= ${binary:Version}),
          open5gs-udm (= ${binary:Version}),
          open5gs-pcf (= ${binary:Version}),
+         open5gs-nssf (= ${binary:Version}),
+         open5gs-bsf (= ${binary:Version}),
          open5gs-udr (= ${binary:Version})
 Description: 5G Core and EPC (metapackage)
  Open5GS is a C-language implementation of 5G Core and EPC

debian/open5gs-bsf.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-bsfd
+configs/open5gs/bsf.yaml etc/open5gs
+configs/systemd/open5gs-bsfd.service lib/systemd/system

debian/open5gs-common.install

@@ -3,4 +3,4 @@ usr/lib/*/libfd*.so*
 usr/lib/*/freeDiameter/*.fdx
 configs/freeDiameter/cacert.pem /etc/freeDiameter
 configs/logrotate/open5gs /etc/logrotate.d
-misc/db/open5gs-dbctl /usr/bin
+#misc/db/open5gs-dbctl /usr/bin

debian/open5gs-nssf.install

@@ -0,0 +1,3 @@
+usr/bin/open5gs-nssfd
+configs/open5gs/nssf.yaml etc/open5gs
+configs/systemd/open5gs-nssfd.service lib/systemd/system

docker/README.md

@@ -1,76 +1,112 @@
 Docker running example
 ===========================================
 * Build Image
-  $ docker-compose build
+  
+  `$ docker-compose build`
 
 * Development 
-  $ docker-compose run dev
+  
+  `$ docker-compose run dev`
 
 * Runtime
+  ```
   $ docker-compose \
     -f docker-compose.yml -f docker-compose.run.yml run run
+  ```
 
 * Test
+  ```
   $ docker-compose \
     -f docker-compose.yml -f docker-compose.test.yml run test
+  ```
 
 * Test(ubuntu:artful)
+  ```
   $ TAG=eoan docker-compose build
   $ TAG=eoan docker-compose \
     -f docker-compose.yml -f docker-compose.test.yml run test
+  ```
 
 * Development(fedora:latest)
+  ```
   $ DIST=fedora docker-compose build
   $ DIST=fedora docker-compose run dev
+  ```
 
 * Runtime(debian:jessie)
+  ```
   $ DIST=debian TAG=stretch docker-compose build
   $ DIST=debian TAG=stretch docker-compose 
     -f docker-compose.yml -f docker-compose.run.yml run run
+  ```
 
 * All Test with All Environment
-  $ ./check.sh
+  
+  `$ ./check.sh`
 
 * Run WebUI 
-  $ docker-compose up -d
+  
+  `$ docker-compose up -d`
 
 For OpenSUSE Build Service Release
 ===========================================
 
 * Build Package
+  
+  ```
   $ ./build-aux/git-version-gen . > .tarball-version
   $ dpkg-source -b .
   $ rm -f .tarball-version
+  ```
 
 * Get Release Key
+  
+  ```
   $ wget http://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/xUbuntu_18.04/Release.key
   $ sudo apt-key add Release.key
+  ```
 
 * Setup Repository
+  ```
   $ sudo sh -c "echo 'deb https://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/xUbuntu_18.04/ ./' > /etc/apt/sources.list.d/open5gs-latest.list"
   $ sudo apt-get update
+  ```
   
 For Launchpad Release
 ===========================================
 
 * Run Docker
+  
+  ```
   $ docker-compose run dev
+  ```
 
 * Setup Debian Environment
+
+```
 export DEBFULLNAME='Sukchan Lee'
 export DEBEMAIL='acetcom@gmail.com'
+```
 
 * Transfer GPG key
+
+```
   $ gpg --export-secret-keys --armor --output private.asc
   $ gpg --import private.asc
   $ gpg --export > public.asc
   $ gpg --import public.asc
+  ```
 
 * Version Change
+  
+  ```
   $ vi meson.build
   $ ./misc/git-version-gen . > .tarball-version 2>/dev/null
+  ```
 
 * Upload OpenBuildService
+  
+  ```
   $ dch -i
   $ meson subprojects download freeDiameter
   $ debuild -S -uc -us -d
@@ -78,16 +114,25 @@ export DEBEMAIL='acetcom@gmail.com'
   $ cd home\:acetcom\:open5gs/latest/
   $ cp ~/git/open5gs_1.0.0.* .
   $ osc ci -m "Update it"
+  ```
 
 * Upload LaunchPad
+  
+  ```
   $ dch -i
   $ meson subprojects download freeDiameter
   $ debuild -S -d
   $ dput ppa:open5gs/latest *.source.changes
+  ```
 
 * Tagging
+  
+  ```
   $ git tag v1.x.x -a
+  ```
 
 * Build package
+  
+  ```
   $ dpkg-buildpackage -d
-
+  ```

docker/alpine/latest/base/Dockerfile

@@ -0,0 +1,26 @@
+ARG dist=alpine
+ARG tag=latest
+FROM ${dist}:${tag}
+
+MAINTAINER Sukchan Lee <acetcom@gmail.com>
+
+RUN apk update && \
+    apk add --no-cache \
+        alpine-sdk \
+        bison \
+        flex \
+        git \
+        meson \
+        bash \
+        linux-headers \
+        bsd-compat-headers \
+        yaml-dev \
+        lksctp-tools-dev \
+        gnutls-dev \
+        libgcrypt-dev \
+        libidn-dev \
+        mongo-c-driver-dev \
+        libmicrohttpd-dev \
+        curl-dev \
+        nghttp2-dev \
+        iproute2

docker/alpine/latest/dev/Dockerfile

@@ -1,21 +1,19 @@
-ARG dist=centos
+ARG dist=alpine
 ARG tag=latest
 ARG username=acetcom
 FROM ${username}/${dist}-${tag}-open5gs-base
 
 MAINTAINER Sukchan Lee <acetcom@gmail.com>
 
-RUN yum -y install \
-        cscope \
-        vim \
-        sudo \
-        iputils \
-        net-tools
-
 COPY setup.sh /root
 
+RUN apk update && \
+    apk add --no-cache \
+        vim \
+        sudo
+
 ARG username=acetcom
-RUN useradd -m --uid=1000 ${username} && \
+RUN adduser -u 1000 acetcom -D && \
     echo "${username} ALL=(root) NOPASSWD:ALL" > /etc/sudoers.d/${username} && \
     chmod 0440 /etc/sudoers.d/${username}
 

docker/alpine/latest/dev/setup.sh

@@ -5,6 +5,6 @@ if ! grep "ogstun" /proc/net/dev > /dev/null; then
 fi
 ip addr del 10.45.0.1/16 dev ogstun 2> /dev/null
 ip addr add 10.45.0.1/16 dev ogstun
-ip addr del cafe::1/64 dev ogstun 2> /dev/null
-ip addr add cafe::1/64 dev ogstun
+ip addr del 2001:230:cafe::1/48 dev ogstun 2> /dev/null
+ip addr add 2001:230:cafe::1/48 dev ogstun
 ip link set ogstun up

docker/build/Dockerfile

@@ -10,10 +10,10 @@ COPY setup.sh /root
 
 ARG USER=open5gs
 ARG REPO=open5gs
-ARG BRANCH=master
-RUN	git clone https://github.com/$USER/$REPO
+ARG BRANCH=main
+RUN git clone https://github.com/$USER/$REPO
 ADD https://api.github.com/repos/$USER/$REPO/git/refs/heads/$BRANCH /root/open5gs-ver.json
 
-RUN	cd $REPO && \
-	git fetch && git checkout -f -B $BRANCH origin/$BRANCH && \
+RUN cd $REPO && \
+    git fetch && git checkout -f -B $BRANCH origin/$BRANCH && \
     meson build && ninja -C build install

docker/build/setup.sh

@@ -5,6 +5,6 @@ if ! grep "ogstun" /proc/net/dev > /dev/null; then
 fi
 ip addr del 10.45.0.1/16 dev ogstun 2> /dev/null
 ip addr add 10.45.0.1/16 dev ogstun
-ip addr del cafe::1/64 dev ogstun 2> /dev/null
-ip addr add cafe::1/64 dev ogstun
+ip addr del 2001:230:cafe::1/48 dev ogstun 2> /dev/null
+ip addr add 2001:230:cafe::1/48 dev ogstun
 ip link set ogstun up

docker/centos/7/base/Dockerfile

@@ -1,30 +0,0 @@
-ARG dist=centos
-ARG tag=latest
-FROM ${dist}:${tag}
-
-MAINTAINER Sukchan Lee <acetcom@gmail.com>
-
-RUN yum -y install epel-release
-#RUN yum -y install https://centos7.iuscommunity.org/ius-release.rpm
-RUN yum -y update
-
-RUN yum -y install \
-        python3 \
-        ninja-build \
-        gcc \
-        flex \
-        bison \
-        git \
-        meson \
-        lksctp-tools-devel \
-        libidn-devel \
-        gnutls-devel \
-        libgcrypt-devel \
-        openssl-devel \
-        cyrus-sasl-devel \
-        libyaml-devel \
-        mongo-c-driver-devel \
-        libmicrohttpd-devel \
-        libcurl-devel \
-        libnghttp2-devel \
-        iproute

docker/centos/7/dev

@@ -1 +0,0 @@
-../8/dev

docker/centos/8

@@ -1 +0,0 @@
-latest

docker/centos/latest/base/Dockerfile

@@ -1,37 +0,0 @@
-ARG dist=centos
-ARG tag=latest
-FROM ${dist}:${tag}
-
-MAINTAINER Sukchan Lee <acetcom@gmail.com>
-
-RUN dnf -y install epel-release && \
-        dnf -y install 'dnf-command(config-manager)' && \
-        dnf config-manager --set-enabled PowerTools && \
-        dnf -y update
-
-RUN dnf -y install \
-        https://www.elrepo.org/elrepo-release-8.el8.elrepo.noarch.rpm && \
-        dnf config-manager --set-enabled elrepo-testing && \
-        dnf -y update
-
-RUN dnf -y install \
-        python3 \
-        ninja-build \
-        gcc \
-        flex \
-        bison \
-        git \
-        lksctp-tools-devel \
-        libidn-devel \
-        gnutls-devel \
-        libgcrypt-devel \
-        openssl-devel \
-        cyrus-sasl-devel \
-        libyaml-devel \
-        mongo-c-driver-devel \
-        libmicrohttpd-devel \
-        libcurl-devel \
-        libnghttp2-devel \
-        iproute
-
-RUN dnf -y install meson

docker/check.sh

@@ -9,9 +9,6 @@ TAG=bionic docker-compose -f docker-compose.yml -f docker-compose.test.yml run -
 DIST=fedora TAG=32 docker-compose build
 DIST=fedora TAG=32 docker-compose -f docker-compose.yml -f docker-compose.test.yml run --rm test
 
-DIST=centos docker-compose build
-DIST=centos docker-compose -f docker-compose.yml -f docker-compose.test.yml run --rm test
-
 DIST=debian docker-compose build
 DIST=debian docker-compose -f docker-compose.yml -f docker-compose.test.yml run --rm test
 

docker/debian/latest/base/Dockerfile

@@ -28,6 +28,7 @@ RUN apt-get update && \
         libmicrohttpd-dev \
         libcurl4-gnutls-dev \
         libnghttp2-dev \
+        libtins-dev \
         iproute2 \
         ca-certificates \
         netbase \

docker/debian/latest/dev/setup.sh

@@ -5,6 +5,6 @@ if ! grep "ogstun" /proc/net/dev > /dev/null; then
 fi
 ip addr del 10.45.0.1/16 dev ogstun 2> /dev/null
 ip addr add 10.45.0.1/16 dev ogstun
-ip addr del cafe::1/64 dev ogstun 2> /dev/null
-ip addr add cafe::1/64 dev ogstun
+ip addr del 2001:230:cafe::1/48 dev ogstun 2> /dev/null
+ip addr add 2001:230:cafe::1/48 dev ogstun
 ip link set ogstun up

docker/docker-compose.test.yml

@@ -15,4 +15,4 @@ services:
     sysctls:
       - net.ipv6.conf.all.disable_ipv6=0
     hostname: open5gs-test
-    command: /bin/bash -c "/root/setup.sh; cd open5gs && ninja -C build test"
+    command: /bin/bash -c "/root/setup.sh; cd open5gs/build && meson test -v"

docker/fedora/latest/base/Dockerfile

@@ -8,6 +8,7 @@ RUN dnf -y install \
         python3 \
         ninja-build \
         gcc \
+        gcc-c++ \
         flex \
         bison \
         git \

docker/fedora/latest/dev/setup.sh

@@ -5,6 +5,6 @@ if ! grep "ogstun" /proc/net/dev > /dev/null; then
 fi
 ip addr del 10.45.0.1/16 dev ogstun 2> /dev/null
 ip addr add 10.45.0.1/16 dev ogstun
-ip addr del cafe::1/64 dev ogstun 2> /dev/null
-ip addr add cafe::1/64 dev ogstun
+ip addr del 2001:230:cafe::1/48 dev ogstun 2> /dev/null
+ip addr add 2001:230:cafe::1/48 dev ogstun
 ip link set ogstun up

docker/ubuntu/latest/base/Dockerfile

@@ -28,6 +28,7 @@ RUN apt-get update && \
         libmicrohttpd-dev \
         libcurl4-gnutls-dev \
         libnghttp2-dev \
+        libtins-dev \
         iproute2 \
         ca-certificates \
         netbase \

docker/ubuntu/latest/dev/Dockerfile

@@ -23,12 +23,12 @@ RUN apt-get update && \
         net-tools && \
     apt-get clean
 
-RUN apt-get update && \
-    apt-get install -y software-properties-common && \
-    sudo add-apt-repository ppa:wireshark-dev/stable -y && \
-    apt-get update && \
-    DEBIAN_FRONTEND=noninteractive \
-    apt-get install -y wireshark
+#RUN apt-get update && \
+#    apt-get install -y software-properties-common && \
+#    sudo add-apt-repository ppa:wireshark-dev/stable -y && \
+#    apt-get update && \
+#    DEBIAN_FRONTEND=noninteractive \
+#    apt-get install -y wireshark
 
 COPY setup.sh /root
 

docker/ubuntu/latest/dev/setup.sh

@@ -5,6 +5,6 @@ if ! grep "ogstun" /proc/net/dev > /dev/null; then
 fi
 ip addr del 10.45.0.1/16 dev ogstun 2> /dev/null
 ip addr add 10.45.0.1/16 dev ogstun
-ip addr del cafe::1/64 dev ogstun 2> /dev/null
-ip addr add cafe::1/64 dev ogstun
+ip addr del 2001:230:cafe::1/48 dev ogstun 2> /dev/null
+ip addr add 2001:230:cafe::1/48 dev ogstun
 ip link set ogstun up

docker/webui/Dockerfile

@@ -3,7 +3,7 @@ FROM node:carbon
 MAINTAINER Sukchan Lee <acetcom@gmail.com>
 
 ARG PACKAGE=open5gs
-ARG VERSION=1.0.0
+ARG VERSION=2.2.6
 
 RUN set -e; \
     cd /usr/src; \

docs/Gemfile

@@ -9,7 +9,8 @@ source "https://rubygems.org"
 # This will help ensure the proper Jekyll version is running.
 # Happy Jekylling!
 
-gem "jekyll", "~> 3.8.5"
+gem "jekyll", "~> 4.2.0"
+gem "webrick", "~> 1.7.0"
 gem "minima", "~> 2.0"
 gem 'jekyll-seo-tag'
 

docs/Gemfile.lock

@@ -1,77 +1,83 @@
 GEM
   remote: https://rubygems.org/
   specs:
-    addressable (2.6.0)
-      public_suffix (>= 2.0.2, < 4.0)
+    addressable (2.7.0)
+      public_suffix (>= 2.0.2, < 5.0)
     colorator (1.1.0)
-    concurrent-ruby (1.1.5)
-    em-websocket (0.5.1)
+    concurrent-ruby (1.1.8)
+    em-websocket (0.5.2)
       eventmachine (>= 0.12.9)
       http_parser.rb (~> 0.6.0)
     eventmachine (1.2.7)
-    ffi (1.10.0)
+    ffi (1.15.0)
     forwardable-extended (2.6.0)
     http_parser.rb (0.6.0)
-    i18n (0.9.5)
+    i18n (1.8.9)
       concurrent-ruby (~> 1.0)
-    jekyll (3.8.5)
+    jekyll (4.2.0)
       addressable (~> 2.4)
       colorator (~> 1.0)
       em-websocket (~> 0.5)
-      i18n (~> 0.7)
-      jekyll-sass-converter (~> 1.0)
+      i18n (~> 1.0)
+      jekyll-sass-converter (~> 2.0)
       jekyll-watch (~> 2.0)
-      kramdown (~> 1.14)
+      kramdown (~> 2.3)
+      kramdown-parser-gfm (~> 1.0)
       liquid (~> 4.0)
-      mercenary (~> 0.3.3)
+      mercenary (~> 0.4.0)
       pathutil (~> 0.9)
-      rouge (>= 1.7, < 4)
+      rouge (~> 3.0)
       safe_yaml (~> 1.0)
-    jekyll-feed (0.12.1)
+      terminal-table (~> 2.0)
+    jekyll-feed (0.15.1)
       jekyll (>= 3.7, < 5.0)
-    jekyll-redirect-from (0.15.0)
+    jekyll-redirect-from (0.16.0)
       jekyll (>= 3.3, < 5.0)
-    jekyll-sass-converter (1.5.2)
-      sass (~> 3.4)
-    jekyll-seo-tag (2.6.0)
-      jekyll (~> 3.3)
+    jekyll-sass-converter (2.1.0)
+      sassc (> 2.0.1, < 3.0)
+    jekyll-seo-tag (2.7.1)
+      jekyll (>= 3.8, < 5.0)
     jekyll-watch (2.2.1)
       listen (~> 3.0)
-    kramdown (1.17.0)
+    kramdown (2.3.1)
+      rexml
+    kramdown-parser-gfm (1.1.0)
+      kramdown (~> 2.0)
     liquid (4.0.3)
-    listen (3.1.5)
-      rb-fsevent (~> 0.9, >= 0.9.4)
-      rb-inotify (~> 0.9, >= 0.9.7)
-      ruby_dep (~> 1.2)
-    mercenary (0.3.6)
-    minima (2.5.0)
-      jekyll (~> 3.5)
+    listen (3.5.0)
+      rb-fsevent (~> 0.10, >= 0.10.3)
+      rb-inotify (~> 0.9, >= 0.9.10)
+    mercenary (0.4.0)
+    minima (2.5.1)
+      jekyll (>= 3.5, < 5.0)
       jekyll-feed (~> 0.9)
       jekyll-seo-tag (~> 2.1)
     pathutil (0.16.2)
       forwardable-extended (~> 2.6)
-    public_suffix (3.0.3)
-    rb-fsevent (0.10.3)
-    rb-inotify (0.10.0)
+    public_suffix (4.0.6)
+    rb-fsevent (0.10.4)
+    rb-inotify (0.10.1)
       ffi (~> 1.0)
-    rouge (3.3.0)
-    ruby_dep (1.5.0)
+    rexml (3.2.4)
+    rouge (3.26.0)
     safe_yaml (1.0.5)
-    sass (3.7.4)
-      sass-listen (~> 4.0.0)
-    sass-listen (4.0.0)
-      rb-fsevent (~> 0.9, >= 0.9.4)
-      rb-inotify (~> 0.9, >= 0.9.7)
+    sassc (2.4.0)
+      ffi (~> 1.9)
+    terminal-table (2.0.0)
+      unicode-display_width (~> 1.1, >= 1.1.1)
+    unicode-display_width (1.7.0)
+    webrick (1.7.0)
 
 PLATFORMS
   ruby
 
 DEPENDENCIES
-  jekyll (~> 3.8.5)
+  jekyll (~> 4.2.0)
   jekyll-feed (~> 0.6)
   jekyll-redirect-from
   jekyll-seo-tag
   minima (~> 2.0)
+  webrick (~> 1.7.0)
 
 BUNDLED WITH
-   2.0.1
+   2.2.15

docs/_docs/guide/01-quickstart.md

@@ -34,7 +34,7 @@ The Open5GS 4G/ 5G NSA Core contains the following components:
 
 The core has two main planes: the control plane and the user plane. These are physically separated in Open5GS as CUPS (control/ user plane separation) is implemented.
 
-The MME is the main **control plane** hub of the core. It primarily manages sessions, mobilty, paging and bearers. It links to the HSS, which generates SIM authentication vectors and holds the subscriber profile; and also to the SGWC and PGWC/SMF, which are the control planes of the gateway servers. All the eNBs in the mobile network (4G basestations) connect to the MME. The final element of the control plane is the PCRF, which sits in-between the PGWC/SMF and the HSS, and handles charging and enforces subscriber policies.
+The MME is the main **control plane** hub of the core. It primarily manages sessions, mobility, paging and bearers. It links to the HSS, which generates SIM authentication vectors and holds the subscriber profile; and also to the SGWC and PGWC/SMF, which are the control planes of the gateway servers. All the eNBs in the mobile network (4G basestations) connect to the MME. The final element of the control plane is the PCRF, which sits in-between the PGWC/SMF and the HSS, and handles charging and enforces subscriber policies.
 
 The **user plane** carries user data packets between the eNB/ NSA gNB (5G NSA basestations) and the external WAN. The two user plane core components are the SGWU and PGWU/UPF. Each of these connect back to their control plane counterparts. eNBs/ NSA gNBs connect to the SGWU, which connects to the PGWU/UPF, and on to the WAN.  *By having the control and user planes physically separated like this, it means you can deploy multiple user plane servers in the field (eg somewhere with a high speed Internet connection), whilst keeping control functionality centralised. This enables support of MEC use cases, for example.*
 
@@ -52,8 +52,10 @@ The Open5GS 5G SA Core contains the following functions:
 * UDM - Unified Data Management
 * UDR - Unified Data Repository
 * PCF - Policy and Charging Function
+* NSSF - Network Slice Selection Function
+* BSF - Binding Support Function
 
-The 5G SA core works in a different way to the 4G core - it uses a **Service Based Architecture** (SBI). **Control plane** functions are configured to register with the NRF, and the NRF then helps them discover the other core functions. Running through the other functions: The AMF handles connection and mobility management; a subset of what the 4G MME is tasked with. gNBs (5G basestations) connect to the AMF. The UDM, AUSF and UDR carry out similar operations as the 4G HSS, generating SIM authentication vectors and holding the subscriber profile. Session management is all handled by the SMF (previously the responsibility of the 4G MME/ SGWC/ PGWC). Finally there is the PCF, used for charging and enforcing subscriber policies.
+The 5G SA core works in a different way to the 4G core - it uses a **Service Based Architecture** (SBI). **Control plane** functions are configured to register with the NRF, and the NRF then helps them discover the other core functions. Running through the other functions: The AMF handles connection and mobility management; a subset of what the 4G MME is tasked with. gNBs (5G basestations) connect to the AMF. The UDM, AUSF and UDR carry out similar operations as the 4G HSS, generating SIM authentication vectors and holding the subscriber profile. Session management is all handled by the SMF (previously the responsibility of the 4G MME/ SGWC/ PGWC). The NSSF provides a way to select the network slice. Finally there is the PCF, used for charging and enforcing subscriber policies.
 
 The 5G SA core **user plane** is much simpler, as it only contains a single function. The UPF carries user data packets between the gNB and the external WAN. It connects back to the SMF too. 
 
@@ -107,9 +109,9 @@ https://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/Debian
 https://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/Raspbian_10/
 https://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/xUbuntu_18.04/
 https://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/xUbuntu_19.04/
-https://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/xUbuntu_19.10/
 https://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/xUbuntu_20.04/
 https://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/xUbuntu_20.10/
+https://download.opensuse.org/repositories/home:/acetcom:/open5gs:/latest/xUbuntu_21.04/
 ```
 
 #### openSUSE
@@ -144,16 +146,16 @@ https://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_Unst
 https://download.opensuse.org/repositories/network:/osmocom:/nightly/Raspbian_10/
 https://download.opensuse.org/repositories/network:/osmocom:/nightly/xUbuntu_18.04/
 https://download.opensuse.org/repositories/network:/osmocom:/nightly/xUbuntu_19.04/
-https://download.opensuse.org/repositories/network:/osmocom:/nightly/xUbuntu_19.10/
 https://download.opensuse.org/repositories/network:/osmocom:/nightly/xUbuntu_20.04/
 https://download.opensuse.org/repositories/network:/osmocom:/nightly/xUbuntu_20.10/
+https://download.opensuse.org/repositories/network:/osmocom:/nightly/xUbuntu_21.04/
 ```
 
 
 ## 3. Install the  WebUI of Open5GS
 ---
 
-The WebUI allows you to interactively edit subscriber data. While it is not essential to use this, it makes things easier when you are just starting out on your Open5GS adventure. (A [command line tool](https://github.com/{{ site.github_username }}/open5gs/blob/master/misc/db/open5gs-dbctl) is available for advanced users).
+The WebUI allows you to interactively edit subscriber data. While it is not essential to use this, it makes things easier when you are just starting out on your Open5GS adventure. (A [command line tool](https://github.com/{{ site.github_username }}/open5gs/blob/main/misc/db/open5gs-dbctl) is available for advanced users).
 
 
 [Node.js](https://nodejs.org/) is required to install the WebUI of Open5GS
@@ -163,7 +165,7 @@ The WebUI allows you to interactively edit subscriber data. While it is not esse
     ```bash
     $ sudo apt update
     $ sudo apt install curl
-    $ curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash -
+    $ curl -fsSL https://deb.nodesource.com/setup_14.x | sudo -E bash -
     $ sudo apt install nodejs
     ```
 
@@ -176,7 +178,7 @@ The WebUI allows you to interactively edit subscriber data. While it is not esse
 You can now install WebUI of Open5GS.
 
 ```bash
-$ curl -sL {{ site.url }}{{ site.baseurl }}/assets/webui/install | sudo -E bash -
+$ curl -fsSL {{ site.url }}{{ site.baseurl }}/assets/webui/install | sudo -E bash -
 ```
 
 ## 4. Configure Open5GS
@@ -191,13 +193,14 @@ MongoDB   = 127.0.0.1 (subscriber data) - http://localhost:3000
 
 MME-s1ap  = 127.0.0.2 :36412 for S1-MME
 MME-gtpc  = 127.0.0.2 :2123 for S11
-MME-frDi  = 127.0.0.2 :3868 for S6a auth
+MME-frDi  = 127.0.0.2 :3868 for S6a
 
 SGWC-gtpc = 127.0.0.3 :2123 for S11
 SGWC-pfcp = 127.0.0.3 :8805 for Sxa
 
-SMF-gtpc  = 127.0.0.4 :2123 for S5/8c, N11
-SMF-pfcp  = 127.0.0.4 :8805 for N4
+SMF-gtpc  = 127.0.0.4 :2123 for S5c, N11
+SMF-gtpu  = 127.0.0.4 :2152 for N4u (Sxu)
+SMF-pfcp  = 127.0.0.4 :8805 for N4 (Sxb)
 SMF-frDi  = 127.0.0.4 :3868 for Gx auth
 SMF-sbi   = 127.0.0.4 :7777 for 5G SBI (N7,N10,N11)
 
@@ -205,19 +208,21 @@ AMF-ngap  = 127.0.0.5 :38412 for N2
 AMF-sbi   = 127.0.0.5 :7777 for 5G SBI (N8,N12,N11)
 
 SGWU-pfcp = 127.0.0.6 :8805 for Sxa
-SGWU-gtpu = 127.0.0.6 :2152 for S1-U, S5/8u
+SGWU-gtpu = 127.0.0.6 :2152 for S1-U, S5u
 
-UPF-pfcp  = 127.0.0.7 :8805 for N4
-UPF-gtpu  = 127.0.0.7 :2152 for S5/8u, N3
+UPF-pfcp  = 127.0.0.7 :8805 for N4 (Sxb)
+UPF-gtpu  = 127.0.0.7 :2152 for S5u, N3, N4u (Sxu)
 
-HSS-frDi  = 127.0.0.8 :3868 for S6a auth
+HSS-frDi  = 127.0.0.8 :3868 for S6a, Cx
 
-PCRF-frDi = 127.0.0.9 :3868 for Gx auth
+PCRF-frDi = 127.0.0.9 :3868 for Gx
 
 NRF-sbi   = 127.0.0.10:7777 for 5G SBI
 AUSF-sbi  = 127.0.0.11:7777 for 5G SBI
 UDM-sbi   = 127.0.0.12:7777 for 5G SBI
 PCF-sbi   = 127.0.0.13:7777 for 5G SBI
+NSSF-sbi  = 127.0.0.14:7777 for 5G SBI
+BSF-sbi   = 127.0.0.15:7777 for 5G SBI
 UDR-sbi   = 127.0.0.20:7777 for 5G SBI
 ```
 
@@ -228,7 +233,7 @@ You will need to modify your 4G MME config to support your PLMN and TAC. The int
 If you are aiming to connect an external eNB to your core, you will also need to change the S1AP bind address of the MME **and** the GTP-U bind address of the SGWU. If you are running an eNB stack locally, you will not need to make these changes.
 
 
-Modify [/etc/open5gs/mme.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/mme.yaml.in) to set the S1AP IP address, PLMN ID, and TAC.
+Modify [/etc/open5gs/mme.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/mme.yaml.in) to set the S1AP IP address, PLMN ID, and TAC.
 
 ```diff
 $ diff -u /etc/open5gs/mme.yaml.old /etc/open5gs/mme.yaml
@@ -260,7 +265,7 @@ $ diff -u /etc/open5gs/mme.yaml.old /etc/open5gs/mme.yaml
 
 ```
 
-Modify [/etc/open5gs/sgwu.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/sgwu.yaml.in) to set the GTP-U IP address.
+Modify [/etc/open5gs/sgwu.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/sgwu.yaml.in) to set the GTP-U IP address.
 ```diff
 $ diff -u /etc/open5gs/sgwu.yaml.old /etc/open5gs/sgwu.yaml
 
@@ -287,7 +292,7 @@ You will need to modify your 5G AMF config to support your PLMN and TAC. The int
 If you are aiming to connect an external gNB to your core, you will also need to change the NGAP bind address of the AMF **and** the GTPU bind address of the UPF. If you are running an gNB stack locally, you will not need to make these changes.
 
 
-Modify [/etc/open5gs/amf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/amf.yaml.in) to set the NGAP IP address, PLMN ID, TAC and NSSAI.
+Modify [/etc/open5gs/amf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/amf.yaml.in) to set the NGAP IP address, PLMN ID, TAC and NSSAI.
 
 ```diff
 $ diff -u /etc/open5gs/amf.yaml.old /etc/open5gs/amf.yaml
@@ -316,7 +321,7 @@ amf:
 +          mcc: 001 # set your PLMN-MCC
 +          mnc: 01  # set your PLMN-MNC
 +        tac: 2 # should match the TAC used by your gNB
-     plmn:
+     plmn_support:
        - plmn_id:
 -          mcc: 901
 -          mnc: 70
@@ -328,7 +333,7 @@ amf:
 
 ```
 
-Modify [/etc/open5gs/upf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/upf.yaml.in) to set the GTP-U address.
+Modify [/etc/open5gs/upf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/upf.yaml.in) to set the GTP-U address.
 ```diff
 $ diff -u /etc/open5gs/upf.yaml.old /etc/open5gs/upf.yaml
 
@@ -338,9 +343,9 @@ upf:
      gtpu:
 -      - addr: 127.0.0.7
 +      - addr: 10.11.0.7 # for external gNB - a local address that can be reached by the gNB
-     pdn:
+     subnet:
        - addr: 10.45.0.1/16
-       - addr: cafe::1/64
+       - addr: 2001:230:cafe::1/48
 
 ```
 
@@ -414,11 +419,13 @@ target     prot opt source               destination
 
 To enable forwarding and add the NAT rule, enter
 ```bash
-### Enable IPv4 Forwarding
-$ sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
+### Enable IPv4/IPv6 Forwarding
+$ sudo sysctl -w net.ipv4.ip_forward=1
+$ sudo sysctl -w net.ipv6.conf.all.forwarding=1
 
 ### Add NAT Rule
 $ sudo iptables -t nat -A POSTROUTING -s 10.45.0.0/16 ! -o ogstun -j MASQUERADE
+$ sudo ip6tables -t nat -A POSTROUTING -s 2001:230:cafe::/48 ! -o ogstun -j MASQUERADE
 ```
 
 
@@ -461,6 +468,8 @@ $ sudo systemctl stop open5gs-nrfd
 $ sudo systemctl stop open5gs-ausfd
 $ sudo systemctl stop open5gs-udmd
 $ sudo systemctl stop open5gs-pcfd
+$ sudo systemctl stop open5gs-nssfd
+$ sudo systemctl stop open5gs-bsfd
 $ sudo systemctl stop open5gs-udrd
 $ sudo systemctl stop open5gs-webui
 ```
@@ -478,6 +487,8 @@ $ sudo systemctl restart open5gs-nrfd
 $ sudo systemctl restart open5gs-ausfd
 $ sudo systemctl restart open5gs-udmd
 $ sudo systemctl restart open5gs-pcfd
+$ sudo systemctl restart open5gs-nssfd
+$ sudo systemctl restart open5gs-bsfd
 $ sudo systemctl restart open5gs-udrd
 $ sudo systemctl restart open5gs-webui
 ```
@@ -509,6 +520,6 @@ $ sudo rm -Rf /var/log/open5gs
 The WebUI of Open5GS can be removed as follows:
 
 ```bash
-curl -sL {{ site.url }}{{ site.baseurl }}/assets/webui/uninstall | sudo -E bash -
+curl -fsSL {{ site.url }}{{ site.baseurl }}/assets/webui/uninstall | sudo -E bash -
 ```
 

docs/_docs/guide/02-building-open5gs-from-sources.md

@@ -30,11 +30,11 @@ Create the TUN device with the interface name `ogstun`.
 ```bash
 $ sudo ip tuntap add name ogstun mode tun
 $ sudo ip addr add 10.45.0.1/16 dev ogstun
-$ sudo ip addr add cafe::1/64 dev ogstun
+$ sudo ip addr add 2001:230:cafe::1/48 dev ogstun
 $ sudo ip link set ogstun up
 ```
 
-**Tip:** The script provided in [$GIT_REPO/misc/netconf.sh](https://github.com/{{ site.github_username }}/open5gs/blob/master/misc/netconf.sh) makes it easy to configure the TUN device as follows:  
+**Tip:** The script provided in [$GIT_REPO/misc/netconf.sh](https://github.com/{{ site.github_username }}/open5gs/blob/main/misc/netconf.sh) makes it easy to configure the TUN device as follows:
 `$ sudo ./misc/netconf.sh`
 {: .notice--info}
 
@@ -44,7 +44,7 @@ $ sudo ip link set ogstun up
 Install the dependencies for building the source code.
 
 ```bash
-$ sudo apt install python3-pip python3-setuptools python3-wheel ninja-build build-essential flex bison git libsctp-dev libgnutls28-dev libgcrypt-dev libssl-dev libidn11-dev libmongoc-dev libbson-dev libyaml-dev libnghttp2-dev libmicrohttpd-dev libcurl4-gnutls-dev libnghttp2-dev meson
+$ sudo apt install python3-pip python3-setuptools python3-wheel ninja-build build-essential flex bison git libsctp-dev libgnutls28-dev libgcrypt-dev libssl-dev libidn11-dev libmongoc-dev libbson-dev libyaml-dev libnghttp2-dev libmicrohttpd-dev libcurl4-gnutls-dev libnghttp2-dev libtins-dev meson
 ```
 
 Git clone.
@@ -93,7 +93,7 @@ $ cd ../
 
 ##### 5G Core
 
-Modify [install/etc/open5gs/amf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/amf.yaml.in) to set the NGAP IP address, PLMN ID, TAC and NSSAI.
+Modify [install/etc/open5gs/amf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/amf.yaml.in) to set the NGAP IP address, PLMN ID, TAC and NSSAI.
 
 ```diff
 $ diff -u /etc/open5gs/amf.yaml.old /etc/open5gs/amf.yaml
@@ -122,7 +122,7 @@ $ diff -u /etc/open5gs/amf.yaml.old /etc/open5gs/amf.yaml
 +          mcc: 001
 +          mnc: 01
 +        tac: 2
-     plmn:
+     plmn_support:
        - plmn_id:
 -          mcc: 901
 -          mnc: 70
@@ -133,7 +133,7 @@ $ diff -u /etc/open5gs/amf.yaml.old /etc/open5gs/amf.yaml
      security:
 ```
 
-Modify [install/etc/open5gs/upf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/upf.yaml.in) to set the GTP-U and PFCP IP address.
+Modify [install/etc/open5gs/upf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/upf.yaml.in) to set the GTP-U and PFCP IP address.
 ```diff
 $ diff -u /etc/open5gs/upf.yaml.old /etc/open5gs/upf.yaml
 --- upf.yaml	2020-09-05 20:52:28.652234967 -0400
@@ -146,13 +146,13 @@ $ diff -u /etc/open5gs/upf.yaml.old /etc/open5gs/upf.yaml
 -        - 127.0.0.7
 -        - ::1
 +      - addr: 10.11.0.7
-     pdn:
+     subnet:
        - addr: 10.45.0.1/16
-       - addr: cafe::1/64
+       - addr: 2001:230:cafe::1/48
 ```
 ##### 4G EPC
 
-Modify [install/etc/open5gs/mme.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/mme.yaml.in) to set the S1AP IP address, PLMN ID, and TAC.
+Modify [install/etc/open5gs/mme.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/mme.yaml.in) to set the S1AP IP address, PLMN ID, and TAC.
 
 ```diff
 $ diff -u /etc/open5gs/mme.yaml.old /etc/open5gs/mme.yaml
@@ -187,7 +187,7 @@ $ diff -u /etc/open5gs/mme.yaml.old /etc/open5gs/mme.yaml
          ciphering_order : [ EEA0, EEA1, EEA2 ]
 ```
 
-Modify [install/etc/open5gs/sgwu.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/sgwu.yaml.in) to set the GTP-U IP address.
+Modify [install/etc/open5gs/sgwu.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/sgwu.yaml.in) to set the GTP-U IP address.
 ```diff
 $ diff -u /etc/open5gs/sgwu.yaml.old /etc/open5gs/sgwu.yaml
 --- sgwu.yaml	2020-09-05 20:50:39.393022566 -0400
@@ -211,7 +211,7 @@ If you modify the config files while Open5GS daemons are running, please restart
 
 ```bash
 $ cd install/bin/
-$ ./install/bin/open5gs-mmed 
+$ ./install/bin/open5gs-mmed
 Open5GS daemon v2.1.0
 
 08/21 22:53:47.328: [app] INFO: Configuration: '/home/acetcom/Documents/git/open5gs/install/etc/open5gs/mme.yaml' (../src/main.c:54)
@@ -221,7 +221,7 @@ Open5GS daemon v2.1.0
 08/21 22:53:47.365: [gtp] INFO: gtp_connect() [127.0.0.3]:2123 (../lib/gtp/path.c:59)
 08/21 22:53:47.366: [mme] INFO: s1ap_server() [127.0.0.2]:36412 (../src/mme/s1ap-sctp.c:57)
 
-$ ./install/bin/open5gs-sgwcd 
+$ ./install/bin/open5gs-sgwcd
 Open5GS daemon v2.1.0
 
 08/21 22:54:43.059: [app] INFO: Configuration: '/home/acetcom/Documents/git/open5gs/install/etc/open5gs/sgwc.yaml' (../src/main.c:54)
@@ -253,7 +253,7 @@ Open5GS daemon v2.1.0
 08/21 22:55:14.040: [sbi] INFO: sbi_server() [127.0.0.5]:7777 (../lib/sbi/server.c:298)
 08/21 22:55:14.040: [amf] INFO: ngap_server() [127.0.0.5]:38412 (../src/amf/ngap-sctp.c:56)
 
-$ ./install/bin/open5gs-sgwud 
+$ ./install/bin/open5gs-sgwud
 Open5GS daemon v2.1.0
 
 08/21 22:54:10.357: [app] INFO: Configuration: '/home/acetcom/Documents/git/open5gs/install/etc/open5gs/sgwu.yaml' (../src/main.c:54)
@@ -262,7 +262,7 @@ Open5GS daemon v2.1.0
 08/21 22:54:10.360: [app] INFO: SGW-U initialize...done (../src/sgwu/app.c:31)
 08/21 22:54:10.361: [gtp] INFO: gtp_server() [127.0.0.6]:2152 (../lib/gtp/path.c:32)
 
-$ ./install/bin/open5gs-upfd 
+$ ./install/bin/open5gs-upfd
 Open5GS daemon v2.1.0
 
 08/21 22:54:21.596: [app] INFO: Configuration: '/home/acetcom/Documents/git/open5gs/install/etc/open5gs/upf.yaml' (../src/main.c:54)
@@ -280,7 +280,7 @@ Open5GS daemon v2.1.0
 08/21 22:57:17.451: [dbi] INFO: MongoDB URI: 'mongodb://localhost/open5gs' (../lib/dbi/ogs-mongoc.c:99)
 08/21 22:57:17.519: [app] INFO: HSS initialize...done (../src/hss/app-init.c:31)
 
-$ ./install/bin/open5gs-pcrfd 
+$ ./install/bin/open5gs-pcrfd
 Open5GS daemon v2.1.0
 
 08/21 22:57:45.894: [app] INFO: Configuration: '/home/acetcom/Documents/git/open5gs/install/etc/open5gs/pcrf.yaml' (../src/main.c:54)
@@ -305,7 +305,7 @@ Open5GS daemon v2.1.0
 08/21 22:55:41.900: [app] INFO: AUSF initialize...done (../src/ausf/app.c:31)
 08/21 22:55:41.900: [sbi] INFO: sbi_server() [127.0.0.11]:7777 (../lib/sbi/server.c:298)
 
-$ ./install/bin/open5gs-udmd 
+$ ./install/bin/open5gs-udmd
 Open5GS daemon v2.1.0
 
 08/21 22:56:02.154: [app] INFO: Configuration: '/home/acetcom/Documents/git/open5gs/install/etc/open5gs/udm.yaml' (../src/main.c:54)
@@ -313,7 +313,7 @@ Open5GS daemon v2.1.0
 08/21 22:56:02.155: [app] INFO: UDM initialize...done (../src/udm/app.c:31)
 08/21 22:56:02.155: [sbi] INFO: sbi_server() [127.0.0.12]:7777 (../lib/sbi/server.c:298)
 
-$ ./install/bin/open5gs-pcfd 
+$ ./install/bin/open5gs-pcfd
 Open5GS daemon v2.1.0
 
 08/21 22:56:02.154: [app] INFO: Configuration: '/home/acetcom/Documents/git/open5gs/install/etc/open5gs/pcf.yaml' (../src/main.c:54)
@@ -321,7 +321,23 @@ Open5GS daemon v2.1.0
 08/21 22:56:02.155: [app] INFO: PCF initialize...done (../src/pcf/app.c:31)
 08/21 22:56:02.155: [sbi] INFO: sbi_server() [127.0.0.12]:7777 (../lib/sbi/server.c:298)
 
-$ ./install/bin/open5gs-udrd 
+$ ./install/bin/open5gs-nssfd
+Open5GS daemon v2.1.0
+
+08/21 22:56:02.154: [app] INFO: Configuration: '/home/acetcom/Documents/git/open5gs/install/etc/open5gs/nssfd.yaml' (../src/main.c:54)
+08/21 22:56:02.154: [app] INFO: File Logging: '/home/acetcom/Documents/git/open5gs/install/var/log/open5gs/nssfd.log' (../src/main.c:57)
+08/21 22:56:02.155: [app] INFO: NSSF initialize...done (../src/nssfd/app.c:31)
+08/21 22:56:02.155: [sbi] INFO: sbi_server() [127.0.0.12]:7777 (../lib/sbi/server.c:298)
+
+$ ./install/bin/open5gs-bsfd
+Open5GS daemon v2.1.0
+
+08/21 22:56:02.154: [app] INFO: Configuration: '/home/acetcom/Documents/git/open5gs/install/etc/open5gs/bsf.yaml' (../src/main.c:54)
+08/21 22:56:02.154: [app] INFO: File Logging: '/home/acetcom/Documents/git/open5gs/install/var/log/open5gs/bsf.log' (../src/main.c:57)
+08/21 22:56:02.155: [app] INFO: BSF initialize...done (../src/bsf/app.c:31)
+08/21 22:56:02.155: [sbi] INFO: sbi_server() [127.0.0.12]:7777 (../lib/sbi/server.c:298)
+
+$ ./install/bin/open5gs-udrd
 Open5GS daemon v2.1.0
 
 08/21 22:56:15.810: [app] INFO: Configuration: '/home/acetcom/Documents/git/open5gs/install/etc/open5gs/udr.yaml' (../src/main.c:54)
@@ -367,7 +383,7 @@ $ ./build/tests/app/app ## Both 5G Core and EPC with ./build/configs/sample.yaml
 
 ```bash
 $ sudo apt install curl
-$ curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash -
+$ curl -fsSL https://deb.nodesource.com/setup_14.x | sudo -E bash -
 $ sudo apt install nodejs
 ```
 
@@ -375,7 +391,7 @@ Install the dependencies to run WebUI
 
 ```bash
 $ cd webui
-$ npm install
+$ npm ci --no-optional
 ```
 
 The WebUI runs as an [npm](https://www.npmjs.com/) script.
@@ -444,11 +460,13 @@ target     prot opt source               destination
 Chain POSTROUTING (policy ACCEPT)
 target     prot opt source               destination
 
-### Enable IPv4 Forwarding
-$ sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
+### Enable IPv4/IPv6 Forwarding
+$ sudo sysctl -w net.ipv4.ip_forward=1
+$ sudo sysctl -w net.ipv6.conf.all.forwarding=1
 
 ### Add NAT Rule
 $ sudo iptables -t nat -A POSTROUTING -s 10.45.0.0/16 ! -o ogstun -j MASQUERADE
+$ sudo ip6tables -t nat -A POSTROUTING -s 2001:230:cafe::/48 ! -o ogstun -j MASQUERADE
 ```
 
 **Note:** The above assumes you do not have any existing rules in the filter and nat tables. If a program such as docker has already set up rules, you may need to add the Open5GS related rules differently.
@@ -460,6 +478,42 @@ $ sudo iptables -t nat -A POSTROUTING -s 10.45.0.0/16 ! -o ogstun -j MASQUERADE
 - You can see actual traffic through wireshark -- [[srsenb.pcapng]]({{ site.url }}{{ site.baseurl }}/assets/pcapng/srsenb.pcapng).
 - You can view the log at `$INSTALL_PREFIX/var/log/open5gs/*.log`.
 
+### Re-install with updated source code
+
+You need to update the Open5GS source and all subprojects.
+
+```bash
+$ cd open5gs
+$ git pull ## Update the Open5GS source
+$ meson subprojects update ## Update all subprojects
+```
+
+To compile with meson:
+
+```bash
+$ ninja -C build
+```
+
+Check whether the compilation is correct.
+```bash
+$ cd build
+$ meson test -v
+```
+
+Install Open5GS without making any configuration file changes.
+```bash
+$ ninja install
+```
+
+**Note:** The configuration files in the installation directory are not changed. If you want to initialize the configuration files as well, you need to delete the existing installation directory and install it.
+{: .notice--danger}
+
+Install Open5GS and initialize configuration files.
+```bash
+$ rm -Rf ../install
+$ ninja install
+```
+
 ### Troubleshooting
 ---
 

docs/_docs/guide/03-splitting-network-functions.md

@@ -33,7 +33,9 @@ PCRF-frDi = 127.0.0.9 :3868 for Gx auth
 NRF-sbi   = 127.0.0.10:7777 for 5G SBI
 AUSF-sbi  = 127.0.0.11:7777 for 5G SBI
 UDM-sbi   = 127.0.0.12:7777 for 5G SBI
-PCF-sbi   = 127.0.0.12:7777 for 5G SBI
+PCF-sbi   = 127.0.0.13:7777 for 5G SBI
+NSSF-sbi   = 127.0.0.14:7777 for 5G SBI
+BSF-sbi   = 127.0.0.15:7777 for 5G SBI
 UDR-sbi   = 127.0.0.20:7777 for 5G SBI
 ```
 
@@ -50,7 +52,7 @@ You can refer to the network settings at
 [{{ site.url }}{{ site.baseurl }}/assets/Open5GS-Diagram.pdf]({{ site.url }}{{ site.baseurl }}/assets/Open5GS-Diagram.pdf) provided by [@kbarlee](https://github.com/kbarlee) in issue [#528](https://github.com/{{ site.github_username }}/open5gs/issues/528)
 {: .notice--danger}
 
-Modify [install/etc/open5gs/mme.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/mme.yaml.in) to set the S1AP IP address, PLMN ID, and TAC.
+Modify [install/etc/open5gs/mme.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/mme.yaml.in) to set the S1AP IP address, PLMN ID, and TAC.
 
 ```diff
 $ diff -u /etc/open5gs/mme.yaml.old /etc/open5gs/mme.yaml
@@ -85,7 +87,7 @@ $ diff -u /etc/open5gs/mme.yaml.old /etc/open5gs/mme.yaml
          ciphering_order : [ EEA0, EEA1, EEA2 ]
 ```
 
-Modify [install/etc/open5gs/sgwc.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/sgwc.yaml.in) to set the PFCP IP address.
+Modify [install/etc/open5gs/sgwc.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/sgwc.yaml.in) to set the PFCP IP address.
 ```diff
 $ diff -u /etc/open5gs/sgwc.yaml.old /etc/open5gs/sgwc.yaml
 @@ -49,7 +49,7 @@
@@ -108,7 +110,7 @@ $ diff -u /etc/open5gs/sgwc.yaml.old /etc/open5gs/sgwc.yaml
  # parameter:
 ```
 
-Modify [install/etc/open5gs/smf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/smf.yaml.in) to set the PFCP IP address.
+Modify [install/etc/open5gs/smf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/smf.yaml.in) to set the PFCP IP address.
 ```diff
 $ diff -u /etc/open5gs/smf.yaml.old /etc/open5gs/smf.yaml
 --- smf.yaml.old	2020-08-22 11:37:39.990816411 -0400
@@ -120,9 +122,9 @@ $ diff -u /etc/open5gs/smf.yaml.old /etc/open5gs/smf.yaml
 -      - addr: 127.0.0.4
 -      - addr: ::1
 +      - addr: 10.10.0.4
-     pdn:
+     subnet:
        - addr: 10.45.0.1/16
-       - addr: cafe::1/64
+       - addr: 2001:230:cafe::1/48
 @@ -282,7 +281,7 @@
  #
  upf:
@@ -135,7 +137,7 @@ $ diff -u /etc/open5gs/smf.yaml.old /etc/open5gs/smf.yaml
 
 ```
 
-Modify [install/etc/open5gs/amf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/amf.yaml.in) to set the NGAP IP address, PLMN ID, TAC and NSSAI.
+Modify [install/etc/open5gs/amf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/amf.yaml.in) to set the NGAP IP address, PLMN ID, TAC and NSSAI.
 
 ```diff
 diff -u /etc/open5gs/amf.yaml.old /etc/open5gs/amf.yaml
@@ -164,7 +166,7 @@ diff -u /etc/open5gs/amf.yaml.old /etc/open5gs/amf.yaml
 +          mcc: 901
 +          mnc: 70
 +        tac: 1
-     plmn:
+     plmn_support:
        - plmn_id:
 -          mcc: 001
 -          mnc: 01
@@ -178,7 +180,7 @@ diff -u /etc/open5gs/amf.yaml.old /etc/open5gs/amf.yaml
          ciphering_order : [ NEA0, NEA1, NEA2 ]
 ```
 
-Modify [install/etc/open5gs/sgwu.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/sgwu.yaml.in) to set the GTP-U and PFCP IP address.
+Modify [install/etc/open5gs/sgwu.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/sgwu.yaml.in) to set the GTP-U and PFCP IP address.
 ```diff
 $ diff -u /etc/open5gs/sgwu.yaml.old /etc/open5gs/sgwu.yaml
 --- sgwu.yaml.old	2020-08-22 11:41:09.214670723 -0400
@@ -197,7 +199,7 @@ $ diff -u /etc/open5gs/sgwu.yaml.old /etc/open5gs/sgwu.yaml
  # sgwc:
 ```
 
-Modify [install/etc/open5gs/upf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/upf.yaml.in) to set the GTP-U and PFCP IP address.
+Modify [install/etc/open5gs/upf.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/upf.yaml.in) to set the GTP-U and PFCP IP address.
 ```diff
 $ diff -u /etc/open5gs/upf.yaml.old /etc/open5gs/upf.yaml
 --- upf.yaml.old	2020-08-22 11:42:57.781750067 -0400
@@ -213,9 +215,9 @@ $ diff -u /etc/open5gs/upf.yaml.old /etc/open5gs/upf.yaml
 -        - 127.0.0.7
 -        - ::1
 +      - addr: 10.11.0.7
-     pdn:
+     subnet:
        - addr: 10.45.0.1/16
-       - addr: cafe::1/64
+       - addr: 2001:230:cafe::1/48
 ```
 
 After changing conf files, please restart Open5GS daemons.

docs/_docs/hardware/01-genodebs.md

@@ -5,46 +5,43 @@ head_inline: "<style> .blue { color: blue; } .bold { font-weight: bold; } </styl
 
 This page lists Radio hardware that has been tested by members of the Open5GS community,
 
-Listed eNodeBs have at a minimum connected to Open5GS. This does not mean all functionality (dedicated bearers, GBRs, etc) has been tested.
-
 If you have tested radio hardware from a vendor not listed with Open5GS, please add it to this page [by creating a PR on GitHub.](https://github.com/open5gs/open5gs)
 
-### Commercial Macro BTS
----
-
- * Huawei BTS 3900 (S/W version V100R011C10SPC230)
-
-### Small Cells
+### Commercial 5G
+---
+ * Airspan 5G OpenRange vCU + Airspan 5G OpenRange vDU + Airspan 5G OpenRANGE06 AirVelocity 2700 RU
+ * NOKIA AEQE (SW: 5G20A)
+ * NOKIA AEQD (SW: 5G20A)
+ * Huawei BTS 5900
+
+### Commercial 4G
 ---
 
+ * Accelleran E1010 (LTE TDD B42)
+ * AirHarmony 4000
+ * AirHarmony 4200
+ * AirHarmony 4400
+ * Airspan AirSpeed 1030
+ * Airspan AirHarmony 1000
  * Baicells Neutrino
  * Baicells Nova 243
  * Baicells Nova 246
  * Baicells Nova 436Q
  * Baicells Nova 227 (EBS & CBRS)
  * Baicells Nova 233
- * Airspan AirSpeed 1030
- * Airspan AirHarmony 1000
- * AirHarmony 4000
- * AirHarmony 4200
- * AirHarmony 4400
  * Gemtek WLTGFC-101 (S/W version 2.1.1746.1116)
+ * Huawei BTS 3900 (S/W version V100R011C10SPC230)
  * NOKIA FW2PC BC28 Flexi Zone G2 Outdoor Micro FDD LTE 700 MHz High Power
  * NOKIA FWH1 B38 Flexi Zone Outdoor Micro TD LTE 2600 MHz
 
-### OpenRAN Hardware
----
-
-
 ### 4G/5G Software Stacks + SDRs
 ---
 
- * [srsLTE / srsENB](https://github.com/srsLTE/srsLTE) + LimeSDR, USRP, BladeRF x40 (BladeRF Not stable)
  * [Amarisoft](https://www.amarisoft.com/) + LimeSDR, USRP, Amarisoft PCI Express Card
+ * [srsLTE / srsENB](https://github.com/srsLTE/srsLTE) + LimeSDR, USRP, BladeRF x40 (BladeRF Not stable)
 
 ### Misc Radio Hardware
 ---
+ * [OpenAirInterface v1.0.3](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tree/v1.0.3) 4G RAN Simulator
  * [OsmoBTS](https://osmocom.org/projects/osmobts/wiki) controlled ip.access NanoBTS (Used for CSFB with Osmocom)
  * [UERANSIM](https://github.com/aligungr/UERANSIM) 5G RAN Simulator
- * [OpenAirInterface v1.0.3](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tree/v1.0.3) 4G RAN Simulator
- 

docs/_docs/platform/01-debian-ubuntu.md

@@ -67,7 +67,7 @@ $ sudo sh -c "cat << EOF > /etc/systemd/network/99-open5gs.network
 Name=ogstun
 [Network]
 Address=10.45.0.1/16
-Address=cafe::1/64
+Address=2001:230:cafe::1/48
 EOF"
 ```
 
@@ -84,7 +84,7 @@ Make sure it is set up properly.
 $ ifconfig ogstun
 ogstun: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1500
         inet 10.45.0.1  netmask 255.255.0.0  destination 10.45.0.1
-        inet6 cafe::1  prefixlen 64  scopeid 0x0<global>
+        inet6 2001:230:cafe::1  prefixlen 64  scopeid 0x0<global>
         inet6 fe80::e86e:86d8:ea24:f8ee  prefixlen 64  scopeid 0x20<link>
         unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 500  (UNSPEC)
         RX packets 0  bytes 0 (0.0 B)

docs/_docs/platform/02-centos.md

@@ -109,7 +109,7 @@ a base CentOS 8 installation.
 
 
 ```bash
-$ sudo dnf install python3 meson ninja-build gcc flex bison git lksctp-tools-devel libidn-devel gnutls-devel libgcrypt-devel openssl-devel cyrus-sasl-devel libyaml-devel mongo-c-driver-devel libmicrohttpd-devel libcurl-devel libnghttp2-devel
+$ sudo dnf install python3 meson ninja-build gcc gcc-c++ flex bison git lksctp-tools-devel libidn-devel gnutls-devel libgcrypt-devel openssl-devel cyrus-sasl-devel libyaml-devel mongo-c-driver-devel libmicrohttpd-devel libcurl-devel libnghttp2-devel
 ```
 
 ### Install the SCTP kernel module in kernel-modules-extra.
@@ -236,7 +236,7 @@ Set the IP address on the `ogstun` TUN interface.
 
 ```bash
 $ sudo ip addr add 10.45.0.1/16 dev ogstun
-$ sudo ip addr add cafe::1/64 dev ogstun
+$ sudo ip addr add 2001:230:cafe::1/48 dev ogstun
 ```
 
 Make sure it is set up properly.
@@ -247,7 +247,7 @@ $ ip link show
 
 **Notice:** This configuration is not persistent after rebooting. The
 script provided in [$GIT_REPO/misc/netconf.sh](https://github.com/{{
-site.github_username }}/open5gs/blob/master/misc/netconf.sh) makes it easy
+site.github_username }}/open5gs/blob/main/misc/netconf.sh) makes it easy
 to configure the TUN device as follows:
 `$ sudo ./misc/netconf.sh`
 {: .notice--info}
@@ -325,7 +325,7 @@ $ cd ../
 $ ls install/bin
 open5gs-amfd   open5gs-hssd  open5gs-nrfd   open5gs-sgwcd  open5gs-smfd  open5gs-udrd
 open5gs-ausfd  open5gs-mmed  open5gs-pcrfd  open5gs-sgwud  open5gs-udmd  open5gs-pcfd
-open5gs-upfd
+open5gs-upfd   open5gs-nssfd open5gs-bsfd
 ```
 
 ## Building WebUI of Open5GS
@@ -342,7 +342,7 @@ Install the dependencies to run WebUI
 ```bash
 $ cd ~/open5gs
 $ cd webui
-$ npm install
+$ npm ci --no-optional
 ```
 
 The WebUI runs as an [npm](https://www.npmjs.com/) script.

docs/_docs/platform/03-fedora.md

@@ -52,7 +52,7 @@ You are now ready to set the IP address on TUN device.
 
 ```bash
 $ sudo ip addr add 10.45.0.1/16 dev ogstun
-$ sudo ip addr add cafe::1/64 dev ogstun
+$ sudo ip addr add 2001:230:cafe::1/48 dev ogstun
 ```
 
 Make sure it is set up properly.
@@ -61,7 +61,7 @@ $ sudo ip link set ogstun up
 $ ip link show
 ```
 
-**Tip:** The script provided in [$GIT_REPO/misc/netconf.sh](https://github.com/{{ site.github_username }}/open5gs/blob/master/misc/netconf.sh) makes it easy to configure the TUN device as follows:  
+**Tip:** The script provided in [$GIT_REPO/misc/netconf.sh](https://github.com/{{ site.github_username }}/open5gs/blob/main/misc/netconf.sh) makes it easy to configure the TUN device as follows:
 `$ sudo ./misc/netconf.sh`
 {: .notice--info}
 
@@ -70,7 +70,7 @@ $ ip link show
 
 Install the depedencies for building the source code.
 ```bash
-$ sudo dnf install python3 ninja-build gcc flex bison git lksctp-tools-devel libidn-devel gnutls-devel libgcrypt-devel openssl-devel cyrus-sasl-devel libyaml-devel mongo-c-driver-devel libmicrohttpd-devel libcurl-devel libnghttp2-devel iproute
+$ sudo dnf install python3 ninja-build gcc gcc-c++ flex bison git lksctp-tools-devel libidn-devel gnutls-devel libgcrypt-devel openssl-devel cyrus-sasl-devel libyaml-devel mongo-c-driver-devel libmicrohttpd-devel libcurl-devel libnghttp2-devel iproute
 ```
 
 Install Meson
@@ -127,7 +127,7 @@ Install the dependencies to run WebUI
 
 ```bash
 $ cd webui
-$ npm install
+$ npm ci --no-optional
 ```
 
 The WebUI runs as an [npm](https://www.npmjs.com/) script.

docs/_docs/platform/05-macosx-apple-silicon.md

@@ -1,29 +1,53 @@
 ---
-title: FreeBSD
+title: Mac OS X
 head_inline: "<style> .blue { color: blue; } </style>"
 ---
 
-This guide is based on **FreeBSD Relase 11.1**.
+This guide is based on macOS Big Sur 11.2 on a Macbook Air(Apple M1 Chips) computer.
 {: .blue}
 
+### Install Xcode Command-Line Tools
+---
+
+Homebrew requires the Xcode command-line tools from Apple's Xcode.
+```bash
+$ xcode-select --install
+```
+
+### Installing Homebrew
+---
+
+Install brew using the official Homebrew installation instructions.
+```bash
+$ /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
+```
+
 ### Getting MongoDB
 ---
 
-Install MongoDB with package manager.
+Install MongoDB with Package Manager.
 ```bash
-$ sudo pkg install mongodb
+$ brew tap mongodb/brew
+$ brew install mongodb-community
 ```
 
 Run MongoDB server.
 ```bash
-$ mkdir -p ./data/db
-$ mongod --dbpath ./data/db
+$ mongod --config /usr/local/etc/mongod.conf
 ```
 
-### Setting up TUN device (No persistent after rebooting)
+**Tip:** MongoDB is persistent after rebooting with the following commands:
+`$ brew services start mongodb-community`
+{: .notice--info}
+
+
+### Setting up network (No persistent after rebooting)
 ---
 
-Configure the TUN device.
+Note that Open5GS uses built-in "utun" device driver. So, You don't have to install external TUN/TAP driver.
+{: .blue}
+
+Configure the loopback interface.
 ```bash
 $ sudo ifconfig lo0 alias 127.0.0.2 netmask 255.255.255.255
 $ sudo ifconfig lo0 alias 127.0.0.3 netmask 255.255.255.255
@@ -38,15 +62,26 @@ $ sudo ifconfig lo0 alias 127.0.0.10 netmask 255.255.255.255
 $ sudo ifconfig lo0 alias 127.0.0.11 netmask 255.255.255.255
 $ sudo ifconfig lo0 alias 127.0.0.12 netmask 255.255.255.255
 $ sudo ifconfig lo0 alias 127.0.0.13 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.14 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.15 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.16 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.17 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.18 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.19 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.20 netmask 255.255.255.255
 ```
 
-Enable IP forwarding
+Enable IP forwarding & Masquerading
 ```bash
 $ sudo sysctl -w net.inet.ip.forwarding=1
+$ sudo sysctl -w net.inet6.ip6.forwarding=1
+$ sudo sh -c "echo 'nat on {en0} from 10.45.0.0/16 to any -> {en0}' > /etc/pf.anchors/org.open5gs"
+$ sudo sh -c "echo 'nat on {en0} from 2001:230:cafe::1/48 to any -> {en0}' > /etc/pf.anchors/org.open5gs"
+$ sudo pfctl -e -f /etc/pf.anchors/org.open5gs
 ```
 
-**Tip:** The script provided in [$GIT_REPO/support/network/restart.sh](https://github.com/{{ site.github_username }}/open5gs/blob/master/support/network/restart.sh) makes it easy to configure the TUN device as follows:  
-`$ sudo ./support/network/restart.sh`
+**Tip:** The script provided in [$GIT_REPO/misc/netconf.sh](https://github.com/{{ site.github_username }}/open5gs/blob/main/misc/netconf.sh) makes it easy to configure the TUN device as follows:
+`$ sudo ./misc/netconf.sh`
 {: .notice--info}
 
 ### Building Open5GS
@@ -54,13 +89,20 @@ $ sudo sysctl -w net.inet.ip.forwarding=1
 
 Install the depedencies for building the source code.
 ```bash
-$ sudo pkg install py36-pip ninja gcc bison gsed pkgconf git mongo-c-driver gnutls libgcrypt libidn libyaml libmicrohttpd curl
+$ brew install mongo-c-driver gnutls libgcrypt libidn libyaml libmicrohttpd nghttp2 pkg-config bison libusrsctp libtins
 ```
 
-Install Meson using Python.
+Configure Homebrew PATH
 ```bash
-$ sudo pip install --upgrade pip
-$ sudo pip install meson
+$ export PATH="/opt/homebrew/opt/bison/bin:/opt/homebrew/bin:$PATH"
+$ export LIBRARY_PATH=/opt/homebrew/lib
+$ export C_INCLUDE_PATH=/opt/homebrew/include
+$ export CPLUS_INCLUDE_PATH=/opt/homebrew/include
+```
+
+Install Meson using Homebrew.
+```bash
+$ brew install meson
 ```
 
 Git clone.
@@ -107,20 +149,21 @@ $ ninja install
 $ cd ../
 ```
 
+
 ### Building WebUI of Open5GS
 ---
 
 [Node.js](https://nodejs.org/) is required to build WebUI of Open5GS
 
 ```bash
-$ sudo pkg install node
+$ brew install node
 ```
 
 Install the dependencies to run WebUI
 
 ```bash
 $ cd webui
-$ npm install
+$ npm ci --no-optional
 ```
 
 The WebUI runs as an [npm](https://www.npmjs.com/) script.
@@ -128,4 +171,3 @@ The WebUI runs as an [npm](https://www.npmjs.com/) script.
 ```bash
 $ npm run dev
 ```
-

docs/_docs/platform/06-macosx-intel.md

@@ -3,14 +3,23 @@ title: Mac OS X
 head_inline: "<style> .blue { color: blue; } </style>"
 ---
 
-This guide is based on **macOS Big Sur 11.0.1**.
+This guide is based on macOS Big Sur 11.2 on a Macbook Pro(Intel Chips) computer.
 {: .blue}
 
+### Install Xcode Command-Line Tools
+---
+
+Homebrew requires the Xcode command-line tools from Apple's Xcode.
+```bash
+$ xcode-select --install
+```
+
 ### Installing Homebrew
 ---
 
+Install brew using the official Homebrew installation instructions.
 ```bash
-$ /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+$ /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
 ```
 
 ### Getting MongoDB
@@ -32,14 +41,13 @@ $ mongod --config /usr/local/etc/mongod.conf
 {: .notice--info}
 
 
-### Setting up TUN device (No persistent after rebooting)
+### Setting up network (No persistent after rebooting)
 ---
 
-Install TUN/TAP driver
-- You can download it from [http://tuntaposx.sourceforge.net/](http://tuntaposx.sourceforge.net/)
-- And then, run tuntap_20150118.pkg to install TUN/TAP driver.
+Note that Open5GS uses built-in "utun" device driver. So, You don't have to install external TUN/TAP driver.
+{: .blue}
 
-Configure the TUN device.
+Configure the loopback interface.
 ```bash
 $ sudo ifconfig lo0 alias 127.0.0.2 netmask 255.255.255.255
 $ sudo ifconfig lo0 alias 127.0.0.3 netmask 255.255.255.255
@@ -54,16 +62,25 @@ $ sudo ifconfig lo0 alias 127.0.0.10 netmask 255.255.255.255
 $ sudo ifconfig lo0 alias 127.0.0.11 netmask 255.255.255.255
 $ sudo ifconfig lo0 alias 127.0.0.12 netmask 255.255.255.255
 $ sudo ifconfig lo0 alias 127.0.0.13 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.14 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.15 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.16 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.17 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.18 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.19 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.20 netmask 255.255.255.255
 ```
 
 Enable IP forwarding & Masquerading
 ```bash
 $ sudo sysctl -w net.inet.ip.forwarding=1
+$ sudo sysctl -w net.inet6.ip6.forwarding=1
 $ sudo sh -c "echo 'nat on {en0} from 10.45.0.0/16 to any -> {en0}' > /etc/pf.anchors/org.open5gs"
+$ sudo sh -c "echo 'nat on {en0} from 2001:230:cafe::1/48 to any -> {en0}' > /etc/pf.anchors/org.open5gs"
 $ sudo pfctl -e -f /etc/pf.anchors/org.open5gs
 ```
 
-**Tip:** The script provided in [$GIT_REPO/misc/netconf.sh](https://github.com/{{ site.github_username }}/open5gs/blob/master/misc/netconf.sh) makes it easy to configure the TUN device as follows:  
+**Tip:** The script provided in [$GIT_REPO/misc/netconf.sh](https://github.com/{{ site.github_username }}/open5gs/blob/main/misc/netconf.sh) makes it easy to configure the TUN device as follows:
 `$ sudo ./misc/netconf.sh`
 {: .notice--info}
 
@@ -72,7 +89,7 @@ $ sudo pfctl -e -f /etc/pf.anchors/org.open5gs
 
 Install the depedencies for building the source code.
 ```bash
-$ brew install mongo-c-driver gnutls libgcrypt libidn libyaml libmicrohttpd nghttp2 pkg-config
+$ brew install mongo-c-driver gnutls libgcrypt libidn libyaml libmicrohttpd nghttp2 pkg-config libusrsctp libtins
 ```
 
 Install Bison and Create soft link.
@@ -96,7 +113,7 @@ To compile with meson:
 
 ```bash
 $ cd open5gs
-$ meson build --prefix=`pwd`/install -D c_std=c99
+$ meson build --prefix=`pwd`/install
 $ ninja -C build
 ```
 
@@ -144,7 +161,7 @@ Install the dependencies to run WebUI
 
 ```bash
 $ cd webui
-$ npm install
+$ npm ci --no-optional
 ```
 
 The WebUI runs as an [npm](https://www.npmjs.com/) script.
@@ -152,4 +169,3 @@ The WebUI runs as an [npm](https://www.npmjs.com/) script.
 ```bash
 $ npm run dev
 ```
-

docs/_docs/platform/07-freebsd.md

@@ -0,0 +1,216 @@
+---
+title: FreeBSD
+head_inline: "<style> .blue { color: blue; } </style>"
+---
+
+This guide is based on **FreeBSD-11.4-STABLE**.
+{: .blue}
+
+## Install **FreeBSD-11.4-STABLE** from Vagrant box (optional)
+---
+Vagrant provides a simple way to create and deploy Virtual Machines from
+pre-built images using VirtualBox, libvirt, or VMWare as a hypervisor engine.
+This allows the user to quickly create a virtual machine without the hassle
+of installing the operating system by hand.
+
+### Install Vagrant
+---
+
+The instructions to install Vagrant are provided at
+[vagrantup.com](https://www.vagrantup.com/).
+
+
+### Create a FreeBSD-11.4-STABLE Virtual Machine using Vagrant
+---
+
+Use the supplied `Vagrantfile` in the `vagrant` directory to create the
+virtual machine.
+
+Note that this Vagrantfile is identical to the base FreeBSD 11 box, with
+the exception that the amount of virtual memory has been increased to 1GB:
+
+```bash
+cd vagrant/freebsd
+vagrant up --provider virtualbox
+```
+
+### Log into the newly created FreeBSD VM
+---
+
+Use SSH to log into the FreeBSD 11 VM:
+
+```bash
+vagrant ssh
+```
+
+Note that the Open5GS source is *not* copied into the VM.  The instructions
+below provide the step by step instructions for setting up Open5GS for
+either a bare metal or virtual FreeBSD 11 system.
+
+The rest of the commands below are performed inside the FreeBSD VM as the
+user 'vagrant', or on your bare metal FreeBSD 11 system as any normal user.
+
+### Getting MongoDB
+---
+
+Install MongoDB with package manager.
+```bash
+$ sudo pkg install mongodb44
+```
+
+Run MongoDB server.
+```bash
+$ mkdir -p ./data/db
+$ mongod --dbpath ./data/db
+```
+
+### Setting up network (No persistent after rebooting)
+---
+
+Configure the loopback interface.
+```bash
+$ sudo ifconfig lo0 alias 127.0.0.2 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.3 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.4 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.5 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.5 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.6 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.7 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.8 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.9 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.10 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.11 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.12 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.13 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.14 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.15 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.16 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.17 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.18 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.19 netmask 255.255.255.255
+$ sudo ifconfig lo0 alias 127.0.0.20 netmask 255.255.255.255
+```
+
+Enable IP forwarding
+```bash
+$ sudo sysctl -w net.inet.ip.forwarding=1
+$ sudo sysctl -w net.inet6.ip6.forwarding=1
+```
+
+**Tip:** The script provided in [$GIT_REPO/misc/netconf.sh](https://github.com/{{ site.github_username }}/open5gs/blob/main/misc/netconf.sh) makes it easy to configure the TUN device as follows:
+`$ sudo ./misc/netconf.sh`
+{: .notice--info}
+
+### Building Open5GS
+---
+
+Install the depedencies for building the source code.
+```bash
+$ sudo pkg install meson ninja gcc bison gsed pkgconf git mongo-c-driver gnutls libgcrypt libidn libyaml libmicrohttpd nghttp2
+```
+
+Configure gcc PATH
+```bash
+$ setenv LIBRARY_PATH /usr/local/lib
+$ setenv C_INCLUDE_PATH /usr/local/include
+```
+
+If you are using BASH instead of default CSH,
+```bash
+$ export LIBRARY_PATH=/usr/local/lib
+$ export C_INCLUDE_PATH=/usr/local/include
+```
+
+Git clone.
+
+```bash
+$ git clone https://github.com/{{ site.github_username }}/open5gs
+```
+
+To compile with meson:
+
+```bash
+$ cd open5gs
+$ meson build --prefix=`pwd`/install
+$ ninja -C build
+```
+
+**Note:** No source code changes are required for FreeBSD 11.x version. However, in FreeBSD 12.x version, we'll getting a crash with segmentation fault when calling basename(3). To avoid this, you need to change the freeDiameter source code as below.
+{: .blue}
+
+```diff
+$ cd open5gs/subprojects/freeDiameter
+
+$ diff --git a/include/freeDiameter/libfdproto.h b/include/freeDiameter/libfdproto.h
+index 52c11ef..cd7f383 100644
+--- a/include/freeDiameter/libfdproto.h
++++ b/include/freeDiameter/libfdproto.h
+@@ -293,7 +293,7 @@ extern int fd_g_debug_lvl;
+
+ /* A version of __FILE__ without the full path. This is specific to each C file being compiled */
+ static char * file_bname = NULL;
+-static char * file_bname_init(char * full) { file_bname = basename(full); return file_bname; }
++static char * file_bname_init(char * full) { file_bname = __old_basename(full); return file_bname; }
+ #define __STRIPPED_FILE__      (file_bname ?: file_bname_init((char *)__FILE__))
+
+```
+
+Now, compile again:
+{: .blue}
+
+```bash
+$ cd open5gs
+$ ninja -C build
+```
+
+Check whether the compilation is correct.
+
+**Note:** This should require *sudo* due to access `/dev/tun0`.
+{: .notice--danger}
+
+```bash
+$ sudo ./build/tests/attach/attach ## EPC Only
+$ sudo ./build/tests/registration/registration ## 5G Core Only
+```
+
+Run all test programs as below.
+
+**Note:** This should require *sudo* due to access `/dev/tun0`.
+{: .notice--danger}
+
+```bash
+$ cd build
+$ sudo meson test -v
+```
+
+**Tip:** You can also check the result of `ninja -C build test` with a tool that captures packets. If you are running `wireshark`, select the `loopback` interface and set FILTER to `s1ap || gtpv2 || pfcp || diameter || gtp || ngap || http2.data.data || http2.headers`.  You can see the virtually created packets. [testattach.pcapng]({{ site.url }}{{ site.baseurl }}/assets/pcapng/testattach.pcapng)/[testregistration.pcapng]({{ site.url }}{{ site.baseurl }}/assets/pcapng/testregistration.pcapng)
+{: .notice--info}
+
+You need to perform the **installation process**.
+```bash
+$ cd build
+$ ninja install
+$ cd ../
+```
+
+### Building WebUI of Open5GS
+---
+
+[Node.js](https://nodejs.org/) is required to build WebUI of Open5GS
+
+```bash
+$ sudo pkg install node
+```
+
+Install the dependencies to run WebUI
+
+```bash
+$ cd webui
+$ npm ci --no-optional
+```
+
+The WebUI runs as an [npm](https://www.npmjs.com/) script.
+
+```bash
+$ npm run dev
+```

docs/_docs/platform/08-alpine.md

@@ -0,0 +1,115 @@
+---
+title: Alpine
+head_inline: "<style> .blue { color: blue; } </style>"
+---
+
+This guide is based on **Alpine 3.13** Distribution.
+{: .blue}
+
+### Getting MongoDB
+---
+
+Install MongoDB with package manager.
+```bash
+$ sudo apk update
+$ sudo apk add mongodb
+```
+
+Run MongoDB server.
+```bash
+$ mkdir -p ./data/db
+$ mongod --dbpath ./data/db
+```
+
+### Setting up TUN device (No persistent after rebooting)
+---
+
+Create the TUN device. Interface name will be `ogstun`.
+```bash
+$ sudo apk add iproute2
+$ sudo ip tuntap add name ogstun mode tun
+$ ip link show
+```
+
+You are now ready to set the IP address on TUN device. 
+
+```bash
+$ sudo ip addr add 10.45.0.1/16 dev ogstun
+$ sudo ip addr add 2001:230:cafe::1/48 dev ogstun
+```
+
+Make sure it is set up properly.
+```bash
+$ sudo ip link set ogstun up
+$ ip link show
+```
+
+**Tip:** The script provided in [$GIT_REPO/misc/netconf.sh](https://github.com/{{ site.github_username }}/open5gs/blob/main/misc/netconf.sh) makes it easy to configure the TUN device as follows:
+`$ sudo ./misc/netconf.sh`
+{: .notice--info}
+
+### Building Open5GS
+---
+
+Install the depedencies for building the source code.
+```bash
+$ sudo apk add alpine-sdk bison flex git meson bash sudo linux-headers bsd-compat-headers yaml-dev lksctp-tools-dev gnutls-dev libgcrypt-dev libidn-dev mongo-c-driver-dev libmicrohttpd-dev curl-dev nghttp2-dev
+```
+
+Git clone.
+
+```bash
+$ git clone https://github.com/{{ site.github_username }}/open5gs
+```
+
+To compile with meson:
+
+```bash
+$ cd open5gs
+$ meson build --prefix=`pwd`/install
+$ ninja -C build
+```
+
+Check whether the compilation is correct.
+```bash
+$ ./build/tests/attach/attach ## EPC Only
+$ ./build/tests/registration/registration ## 5G Core Only
+```
+
+Run all test programs as below.
+```bash
+$ cd build
+$ meson test -v
+```
+
+**Tip:** You can also check the result of `ninja -C build test` with a tool that captures packets. If you are running `wireshark`, select the `loopback` interface and set FILTER to `s1ap || gtpv2 || pfcp || diameter || gtp || ngap || http2.data.data || http2.headers`.  You can see the virtually created packets. [testattach.pcapng]({{ site.url }}{{ site.baseurl }}/assets/pcapng/testattach.pcapng)/[testregistration.pcapng]({{ site.url }}{{ site.baseurl }}/assets/pcapng/testregistration.pcapng)
+{: .notice--info}
+
+You need to perform the **installation process**.
+```bash
+$ cd build
+$ ninja install
+$ cd ../
+```
+
+### Building WebUI of Open5GS
+---
+
+[Node.js](https://nodejs.org/) is required to build WebUI of Open5GS
+
+```bash
+$ sudo apk add nodejs
+```
+
+Install the dependencies to run WebUI
+
+```bash
+$ cd webui
+$ npm ci --no-optional
+```
+
+The WebUI runs as an [npm](https://www.npmjs.com/) script.
+
+```bash
+$ npm run dev
+```

docs/_docs/troubleshoot/01-simple-issues.md

@@ -24,10 +24,12 @@ open5gs  27485  0.0  0.0 243816 15064 ?        Ssl  12:13   0:00 /usr/bin/open5g
 open5gs  27543  0.0  0.0 222416  9672 ?        Ssl  12:13   0:00 /usr/bin/open5gs-ausfd -c /etc/open5gs/ausf.yaml
 open5gs  27600  0.0  0.0 222328  9668 ?        Ssl  12:13   0:00 /usr/bin/open5gs-udmd -c /etc/open5gs/udm.yaml
 open5gs  27600  0.0  0.0 222329  9669 ?        Ssl  12:13   0:00 /usr/bin/open5gs-pcfd -c /etc/open5gs/pcf.yaml
+open5gs  27600  0.0  0.0 222329  9669 ?        Ssl  12:13   0:00 /usr/bin/open5gs-nssfd -c /etc/open5gs/nssf.yaml
+open5gs  27600  0.0  0.0 222329  9669 ?        Ssl  12:13   0:00 /usr/bin/open5gs-bsfd -c /etc/open5gs/bsf.yaml
 open5gs  27697  0.0  0.0 243976 13716 ?        Ssl  12:13   0:00 /usr/bin/open5gs-udrd -c /etc/open5gs/udr.yaml
 ```
 
-You should see each of the above services, MME, SGW-C, SMF, AMF, SGW-U, UPF, HSS, PCRF, NRF, AUSF, UDM, PCF & UDR are all running.
+You should see each of the above services, MME, SGW-C, SMF, AMF, SGW-U, UPF, HSS, PCRF, NRF, AUSF, UDM, PCF, NSSF, BSF & UDR are all running.
 
 If your instance doesn't show this make sure you're started each service:
 ```bash
@@ -43,6 +45,8 @@ $ systemctl start open5gs-nrfd.service
 $ systemctl start open5gs-ausfd.service
 $ systemctl start open5gs-udmd.service
 $ systemctl start open5gs-pcfd.service
+$ systemctl start open5gs-nssfd.service
+$ systemctl start open5gs-bsfd.service
 $ systemctl start open5gs-udrd.service
 ```
 

docs/_docs/troubleshoot/02-now-in-github-issues.md

@@ -10,35 +10,384 @@ head_inline: "<style> .blue { color: blue; } </style>"
   }
 </style>
 
-#### Cannot open shared object file when running daemon
+#### MME sends Attach reject(EMM-Cause:15) with Diameter error(Result-Code:3002)
 
-An error occurred when running as follows.
+If you see the Attach reject(EMM-Cause:15] with Diameter error(Result-Code:3002), it means that HSS is not running.
 
 ```
-$ ./install/bin/open5gs-nrfd
-./install/bin/open5gs-nrfd: error while loading shared libraries: libogscrypt.so.2: cannot open shared object file: No such file or directory
-```
-
-You need to specify the absolute path to the shared library as follows.
-
-```bash
-$ echo $(cd $(dirname ./install/lib/x86_64-linux-gnu/) && pwd -P)/$(basename ./install/lib/x86_64-linux-gnu/)
-/home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu
-$ export LD_LIBRARY_PATH=/home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu
-$ ldd ./install/bin/open5gs-amfd
 ...
-	libogsapp.so.1 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogsapp.so.1 (0x00007f161ab51000)
-	libogscore.so.1 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogscore.so.1 (0x00007f161a922000)
-	libogssctp.so.1 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogssctp.so.1 (0x00007f161a71d000)
-	libogss1ap.so.1 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogss1ap.so.1 (0x00007f161a519000)
+5/08 18:22:23.584: [diam] ERROR: pid:Routing-OUT (0x563969fc2060) in md_hook_cb_tree@dbg_msg_dumps.c:113:         AVP: 'Vendor-Specific-Application-Id'(260) l=8 f=-M val=(grouped)
+ ((null):0)
+05/08 18:22:23.584: [diam] ERROR: pid:Routing-OUT (0x563969fc2060) in md_hook_cb_tree@dbg_msg_dumps.c:113:            AVP: 'Vendor-Id'(266) l=12 f=-M val=10415 (0x28af)
+ ((null):0)
+05/08 18:22:23.584: [diam] ERROR: pid:Routing-OUT (0x563969fc2060) in md_hook_cb_tree@dbg_msg_dumps.c:113:            AVP: 'Auth-Application-Id'(258) l=12 f=-M val=16777251 (0x1000023)
+ ((null):0)
+05/08 18:22:23.584: [mme] INFO:     Result Code: 3002 (../src/mme/mme-fd-path.c:301)
+05/08 18:22:23.585: [mme] INFO: [001010123456792] Attach reject [EMM_CAUSE:15] (../src/mme/mme-sm.c:448)
+05/08 18:22:23.612: [mme] INFO: UE Context Release [Action:3] (../src/mme/s1ap-handler.c:1328)
+05/08 18:22:23.612: [mme] INFO:     ENB_UE_S1AP_ID[1] MME_UE_S1AP_ID[1] (../src/mme/s1ap-handler.c:1330)
+05/08 18:22:23.612: [mme] INFO:     IMSI[001010123456792] (../src/mme/s1ap-handler.c:1332)
+05/08 18:22:23.612: [mme] INFO: [Removed] Number of eNB-UEs is now 0 (../src/mme/mme-context.c:3228)
 ...
 ```
 
-If you want to set the shared library path permanently, you can use ldconfig.
-```bash
-$ sudo sh -c "echo /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu > /etc/ld.so.conf.d/open5gs.conf"
-$ sudo ldconfig
+Please check the status of HSS and restart it.
 ```
+$ sudo systemctl status open5gs-hssd.service
+● open5gs-hssd.service - Open5GS HSS Daemon
+     Loaded: loaded (/lib/systemd/system/open5gs-hssd.service; disabled; vendor preset: enabled)
+     Active: inactive (dead)
+sudo systemctl status open5gs-hssd.service
+● open5gs-hssd.service - Open5GS HSS Daemon
+     Loaded: loaded (/lib/systemd/system/open5gs-hssd.service; disabled; vendor preset: enabled)
+     Active: active (running) since Sun 2021-05-09 18:36:49 KST; 1s ago
+   Main PID: 6011 (open5gs-hssd)
+      Tasks: 37 (limit: 19047)
+     Memory: 14.6M
+     CGroup: /system.slice/open5gs-hssd.service
+             └─6011 /usr/bin/open5gs-hssd -c /etc/open5gs/hss.yaml
+
+May 09 18:36:49 open5gs systemd[1]: Started Open5GS HSS Daemon.
+May 09 18:36:49 open5gs open5gs-hssd[6011]: Open5GS daemon v2.2.7
+May 09 18:36:49 open5gs open5gs-hssd[6011]: 05/09 18:36:49.987: [app] INFO: Configuration: '/etc/ope>
+May 09 18:36:49 open5gs open5gs-hssd[6011]: 05/09 18:36:49.987: [app] INFO: File Logging: '/var/log/>
+May 09 18:36:49 open5gs open5gs-hssd[6011]: 05/09 18:36:49.994: [dbi] INFO: MongoDB URI: 'mongodb://>
+May 09 18:36:50 open5gs open5gs-hssd[6011]: 05/09 18:36:50.116: [app] INFO: HSS initialize...done
+```
+
+#### MME Diameter-Error with HSS-crash using v2.2.x package
+
+If the following MME log occurs while connecting to the UE, it means that you may use the old format DB schema.
+
+```
+04/14 20:14:21.981: [diam] ERROR: pid:PSM/hss.localdomain in fd_psm_change_state@p_psm.c:287: 'STATE_OPEN' -> 'STATE_CLOSED' 'hss.localdomain'
+((null):0)
+04/14 20:14:21.982: [diam] ERROR: pid:PSM/hss.localdomain in md_hook_cb_tree@dbg_msg_dumps.c:89: FAILOVER from 'hss.localdomain':
+((null):0)
+04/14 20:14:21.982: [diam] ERROR: pid:PSM/hss.localdomain in md_hook_cb_tree@dbg_msg_dumps.c:90: 'Update-Location-Request'
+((null):0)
+```
+
+In this case, the HSS may crash as shown below.
+
+```
+04/12 10:13:45.025: [app] INFO: Configuration: '/home/open5gs/install/etc/open5gs/hss.yaml' (../lib/app/ogs-init.c:129)
+04/12 10:13:45.025: [app] INFO: File Logging: '/home/open5gs/install/var/log/open5gs/hss.log' (../lib/app/ogs-init.c:132)
+04/12 10:13:45.028: [dbi] INFO: MongoDB URI: 'mongodb://localhost/open5gs' (../lib/dbi/ogs-mongoc.c:129)
+04/12 10:13:45.068: [diam] INFO: CONNECTED TO 'mme.epc.mnc001.mcc001.3gppnetwork.org' (SCTP,soc#17): (../lib/diameter/common/logger.c:108)
+04/12 10:13:45.069: [app] INFO: HSS initialize...done (../src/hss/app-init.c:31)
+04/12 10:14:27.167: [core] FATAL: ogs_slice_find_by_s_nssai: Assertion `num_of_slice_data' failed. (../lib/core/ogs-3gpp-types.c:529)
+04/12 10:14:27.168: [core] FATAL: backtrace() returned 10 addresses (../lib/core/ogs-abort.c:37)
+/home/open5gs/install/lib/x86_64-linux-gnu/libogscore.so.2(ogs_slice_find_by_s_nssai+0xd2) [0x7f3b720a126e]
+./install/bin/open5gs-hssd(+0xd12e) [0x55a57bb6f12e]
+/home/open5gs/install/lib/x86_64-linux-gnu/libfdproto.so.7(fd_disp_call_cb_int+0x270) [0x7f3b7135acb3]
+/home/open5gs/install/lib/x86_64-linux-gnu/libfdproto.so.7(fd_msg_dispatch+0xdca) [0x7f3b7137442f]
+home/open5gs/install/lib/x86_64-linux-gnu/libfdcore.so.7(+0x67c3c) [0x7f3b715f9c3c]
+/home/open5gs/install/lib/x86_64-linux-gnu/libfdcore.so.7(+0x6ca99) [0x7f3b715fea99]
+/open5gs/install/lib/x86_64-linux-gnu/libfdcore.so.7(+0x6cd06) [0x7f3b715fed06]
+/lib/x86_64-linux-gnu/libpthread.so.0(+0x76db) [0x7f3b70d016db]
+/lib/x86_64-linux-gnu/libc.so.6(clone+0x3f) [0x7f3b70a2a71f]
+```
+
+At this time, you need to check the DB schema is in the form below by using the command the below.
+
+```
+$ mongo
+> use open5gs
+> db.subscribers.find().pretty()
+{
+	"_id" : ObjectId("60969fe79459f8b40d8d3f68"),
+	"imsi" : "901700000000001",
+	"__v" : 0,
+	"access_restriction_data" : 32,
+	"ambr" : {
+		"uplink" : {
+			"value" : 1,
+			"unit" : 3
+		},
+		"downlink" : {
+			"value" : 1,
+			"unit" : 3
+		}
+	},
+	"network_access_mode" : 2,
+	"security" : {
+		"k" : "465b5ce8b199b49faa5f0a2ee238a6bc",
+		"amf" : "8000",
+		"op" : null,
+		"opc" : "e8ed289deba952e4283b54e88e6183ca",
+		"sqn" : NumberLong(97)
+	},
+	"slice" : [
+		{
+			"sst" : 1,
+			"default_indicator" : true,
+			"_id" : ObjectId("60969fe7de8743b3c7b1a973"),
+			"session" : [
+				{
+					"name" : "internet",
+					"type" : 3,
+					"_id" : ObjectId("60969fe7de8743b3c7b1a974"),
+					"pcc_rule" : [ ],
+					"ambr" : {
+						"uplink" : {
+							"value" : 1,
+							"unit" : 3
+						},
+						"downlink" : {
+							"value" : 1,
+							"unit" : 3
+						}
+					},
+					"qos" : {
+						"index" : 9,
+						"arp" : {
+							"priority_level" : 8,
+							"pre_emption_capability" : 1,
+							"pre_emption_vulnerability" : 1
+						}
+					}
+				}
+			]
+		}
+	],
+	"subscribed_rau_tau_timer" : 12,
+	"subscriber_status" : 0
+}
+```
+
+If you see below, you are using the old format DB schema.
+
+```
+$ mongo
+> use open5gs
+> db.subscribers.find().pretty()
+{
+	"_id" : ObjectId("609715fda08851a0744e6ae7"),
+	"imsi" : "901700000021309",
+	"__v" : 0,
+	"access_restriction_data" : 32,
+	"ambr" : {
+		"downlink" : NumberLong(1024000),
+		"uplink" : NumberLong(1024000)
+	},
+	"network_access_mode" : 2,
+	"pdn" : [
+		{
+			"apn" : "internet",
+			"_id" : ObjectId("609715fd455bcd38c884ce85"),
+			"pcc_rule" : [ ],
+			"ambr" : {
+				"downlink" : NumberLong(1024000),
+				"uplink" : NumberLong(1024000)
+			},
+			"qos" : {
+				"qci" : 9,
+				"arp" : {
+					"priority_level" : 8,
+					"pre_emption_vulnerability" : 1,
+					"pre_emption_capability" : 0
+				}
+			},
+			"type" : 0
+		}
+	],
+	"security" : {
+		"k" : "70D49A71DD1A2B806A25ABE0EF749F1E",
+		"amf" : "8000",
+		"op" : null,
+		"opc" : "6F1BF53D624B3A43AF6592854E2444C7"
+	},
+	"subscribed_rau_tau_timer" : 12,
+	"subscriber_status" : 0
+}
+```
+
+If you are using old format DB schema, please perform the following step.
+
+1. First of all, it is recommended to use the following command to remove all existing subscription DB.
+```
+$ mongo
+> use open5gs
+switched to db open5gs
+> db.subscribers.drop()
+true
+```
+2. Then, if you are using a version of WebUI prior to v2.1.7, you need to do a WebUI logout from your web browser.
+3. Finally, install the latest version of WebUI with the following command.
+```
+$ curl -fsSL https://open5gs.org/open5gs/assets/webui/install | sudo -E bash -
+```
+4. Log in to the new WebUI and add new subscriber information using your web browser.
+5. Make sure it is a new DB schema as below:
+```
+$ mongo
+> use open5gs
+> db.subscribers.find().pretty()
+{
+...
+	"slice" : [
+		{
+			"sst" : 1,
+			"default_indicator" : true,
+			"_id" : ObjectId("60969fe7de8743b3c7b1a973"),
+			"session" : [
+...
+}
+```
+
+If the above problem still occurs, we recommend that you delete all Open5GS and start from scratch.
+
+#### 5G Core test failed (e.g. `./build/tests/registration/registration`)
+
+The AUSF(or SMF) has already been started, but NRF-discovery fails and the test program does not work as shown below.
+
+```
+$ ./build/tests/registration/registration
+
+...
+04/12 14:26:25.885: [app] ERROR: Cannot discover [AUSF] (../lib/sbi/path.c:119)
+...
+04/12 14:27:25.666: [app] ERROR: Cannot discover [SMF] (../lib/sbi/path.c:119)
+```
+
+This is a test program bug and has not yet been resolved.
+{: .blue}
+
+To restart the test program, first remove all subscriber information using MongoDB Client
+```
+$ mongo
+> use open5gs
+switched to db open5gs
+> db.subscribers.find()  ### Check the test subscriber
+> db.subscribers.drop()  ### Remove all subscriber
+> db.subscribers.find()  ### Check that all subscribers are empty
+```
+
+Kill all processes.
+```bash
+$ ps -ef | grep open5gs
+$ sudo pkill -9 open5gs-mmed
+$ sudo pkill -9 open5gs-sgwcd
+$ sudo pkill -9 open5gs-smfd
+$ sudo pkill -9 open5gs-amfd
+$ sudo pkill -9 open5gs-sgwud
+$ sudo pkill -9 open5gs-upfd
+$ sudo pkill -9 open5gs-hssd
+$ sudo pkill -9 open5gs-pcrfd
+$ sudo pkill -9 open5gs-nrfd
+$ sudo pkill -9 open5gs-ausfd
+$ sudo pkill -9 open5gs-udmd
+$ sudo pkill -9 open5gs-pcfd
+$ sudo pkill -9 open5gs-nssfd
+$ sudo pkill -9 open5gs-bsfd
+$ sudo pkill -9 open5gs-udrd
+```
+
+Run `./build/tests/registration/registration` again
+```
+$ ./build/tests/registration/registration
+guti-test           : SUCCESS
+auth-test           : SUCCESS
+idle-test           : SUCCESS
+dereg-test          : SUCCESS
+paging-test         : SUCCESS
+identity-test       : SUCCESS
+gmm-status-test     : SUCCESS
+ue-context-test     : SUCCESS
+reset-test          : SUCCESS
+All tests passed.
+```
+
+In general, if this test program succeeds at least once, you can assume that you have successfully built the development environment.
+
+#### How to use a different Slice for each SMF
+
+To add a slice with SST of 1 and SD of 000080, you need to update the configuration file as shown below.
+
+```diff
+### amf.yaml
+
+$ diff --git a/configs/open5gs/amf.yaml.in b/configs/open5gs/amf.yaml.in
+index 7e939e81..dfe4456d 100644
+--- a/configs/open5gs/amf.yaml.in
++++ b/configs/open5gs/amf.yaml.in
+@@ -199,6 +199,12 @@ amf:
+           mnc: 70
+         s_nssai:
+           - sst: 1
++      - plmn_id:
++          mcc: 901
++          mnc: 70
++        s_nssai:
++          - sst: 1
++            sd: 000080
+     security:
+         integrity_order : [ NIA2, NIA1, NIA0 ]
+         ciphering_order : [ NEA0, NEA1, NEA2 ]
+
+### FIRST smf.yaml
+
+$ diff --git a/configs/open5gs/smf.yaml.in b/configs/open5gs/smf.yaml.in
+index d45aa60f..701ee533 100644
+--- a/configs/open5gs/smf.yaml.in
++++ b/configs/open5gs/smf.yaml.in
+@@ -317,6 +317,11 @@ logger:
+ # 
+ 
+ smf:
++    info:
++      - s_nssai:
++          - sst: 1
++            dnn:
++              - internet
+     sbi:
+       - addr: 127.0.0.4
+         port: 7777
+
+### SECOND smf.yaml
+
+$ diff --git a/configs/open5gs/smf.yaml.in b/configs/open5gs/smf.yaml.in
+index d45aa60f..949da220 100644
+--- a/configs/open5gs/smf.yaml.in
++++ b/configs/open5gs/smf.yaml.in
+@@ -317,6 +317,12 @@ logger:
+ #
+
+ smf:
++    info:
++      - s_nssai:
++          - sst: 1
++            sd: 000080
++            dnn:
++              - internet
+     sbi:
+       - addr: 127.0.0.4
+         port: 7777
+
+### nssf.yaml
+$ diff --git a/configs/open5gs/nssf.yaml.in b/configs/open5gs/nssf.yaml.in
+index ecd4f7e2..04d9c4ba 100644
+--- a/configs/open5gs/nssf.yaml.in
++++ b/configs/open5gs/nssf.yaml.in
+@@ -119,6 +119,11 @@ nssf:
+         port: 7777
+         s_nssai:
+           sst: 1
++      - addr: 127.0.0.10
++        port: 7777
++        s_nssai:
++          sst: 1
++          sd: 000080
+ 
+ #
+ # nrf:
+```
+
+Then add a slice to MongoDB's subscriber info.
+
+![Subscriber Info]({{ site.url }}{{ site.baseurl }}/assets/images/subscriber_info_with_two_slice.png)
+
 
 #### Can I disable specific services if 5G functionally is not needed?
 
@@ -64,6 +413,8 @@ $ open5gs-amfd
 $ open5gs-ausfd
 $ open5gs-udmd
 $ open5gs-pcfd
+$ open5gs-nssfd
+$ open5gs-bsfd
 $ open5gs-udrd
 ```
 
@@ -133,7 +484,7 @@ $ diff -u /etc/systemd/network/99-open5gs.network /etc/systemd/network/99-open5g
  [Network]
 -Address=10.45.0.1/16
 +Address=10.46.0.1/16
- Address=cafe::1/64
+ Address=2001:230:cafe::1/48
 ```
 
 Restart systemd-networkd
@@ -141,6 +492,11 @@ Restart systemd-networkd
 $ sudo systemctl restart systemd-networkd
 ```
 
+And then, you need to chanage NAT table as below.
+```
+$ sudo iptables -t nat -A POSTROUTING -s 10.46.0.0/16 ! -o ogstun -j MASQUERADE
+```
+
 Now, you need to modify the configuration file of Open5GS to adjust the UE IP Pool. UE IP Pool can be allocated by SMF or UPF, but in this tutorial, we will modify both configuration files.
 
 ```diff
@@ -150,10 +506,10 @@ $ diff -u smf.yaml smf.yaml.new
 @@ -190,7 +190,7 @@
        - addr: 127.0.0.4
        - addr: ::1
-     pdn:
+     subnet:
 -      - addr: 10.45.0.1/16
 +      - addr: 10.46.0.1/16
-       - addr: cafe::1/64
+       - addr: 2001:230:cafe::1/48
      dns:
        - 8.8.8.8
 ```
@@ -165,10 +521,10 @@ $ diff -u upf.yaml upf.yaml.new
 @@ -139,7 +139,7 @@
      gtpu:
        - addr: 127.0.0.7
-     pdn:
+     subnet:
 -      - addr: 10.45.0.1/16
 +      - addr: 10.46.0.1/16
-       - addr: cafe::1/64
+       - addr: 2001:230:cafe::1/48
 
  #
 ```
@@ -263,6 +619,8 @@ $ sudo pkill -9 open5gs-nrfd
 $ sudo pkill -9 open5gs-ausfd
 $ sudo pkill -9 open5gs-udmd
 $ sudo pkill -9 open5gs-pcfd
+$ sudo pkill -9 open5gs-nssfd
+$ sudo pkill -9 open5gs-bsfd
 $ sudo pkill -9 open5gs-udrd
 ```
 
@@ -357,9 +715,10 @@ Timeout:               0
 
 #### Is it possible to setup IP/NAT table along with Docker?
 
-Enable IP Forward.
+Enable IPv4/IPv6 Forward.
 ```
-$ sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
+$ sudo sysctl -w net.ipv4.ip_forward=1
+$ sudo sysctl -w net.ipv6.conf.all.forwarding=1
 ```
 
 The following is the default docker IP/NAT table.
@@ -435,6 +794,11 @@ And then, apply **newtables** as below.
 $ sudo iptables-restore < newtables
 ```
 
+Docker doesn't have IPv6 NAT rules. In this case, you just add the NAT rule as below.
+```
+$ sudo ip6tables -t nat -A POSTROUTING -s 2001:230:cafe::/48 ! -o ogstun -j MASQUERADE
+```
+
 The above operation is the same as described in the following manuals.
 ```
 ### Check IP Tables
@@ -462,11 +826,13 @@ target     prot opt source               destination
 Chain POSTROUTING (policy ACCEPT)
 target     prot opt source               destination
 
-### Enable IPv4 Forwarding
-$ sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
+### Enable IPv4/IPv6 Forwarding
+$ sudo sysctl -w net.ipv4.ip_forward=1
+$ sudo sysctl -w net.ipv6.conf.all.forwarding=1
 
 ### Add NAT Rule
 $ sudo iptables -t nat -A POSTROUTING -s 10.45.0.0/16 ! -o ogstun -j MASQUERADE
+$ sudo ip6tables -t nat -A POSTROUTING -s 2001:230:cafe::/48 ! -o ogstun -j MASQUERADE
 ```
 
 #### How to use a different DNN/APN for each SMF
@@ -521,81 +887,64 @@ The IP address of the UE can also use a different UE pool depending on the DNN/A
 
 ```
 ### For reference, see `smf.yaml`
-#  <PDN Configuration with UE Pool>
+#  <Subnet for UE Pool>
 #
 #  o IPv4 Pool
 #    $ sudo ip addr add 10.45.0.1/16 dev ogstun
 #
-#    pdn:
+#    subnet:
 #      addr: 10.45.0.1/16
 #
 #  o IPv4/IPv6 Pool
 #    $ sudo ip addr add 10.45.0.1/16 dev ogstun
-#    $ sudo ip addr add cafe:1::1/64 dev ogstun
+#    $ sudo ip addr add 2001:230:cafe::1/48 dev ogstun
 #
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/16
-#      - addr: cafe:1::1/64
+#      - addr: 2001:230:cafe::1/48
 #
 #
-#  o Specific DNN/APN(e.g 'volte') uses 10.46.0.1/16, cafe:2::1/64
-#    All other DNNs/APNs use 10.45.0.1/16, cafe:1::1/64
+#  o Specific DNN/APN(e.g 'volte') uses 10.46.0.1/16, 2001:230:babe::1/48
+#    All other DNNs/APNs use 10.45.0.1/16, 2001:230:cafe::1/48
 #    $ sudo ip addr add 10.45.0.1/16 dev ogstun
 #    $ sudo ip addr add 10.46.0.1/16 dev ogstun
-#    $ sudo ip addr add cafe:1::1/64 dev ogstun
-#    $ sudo ip addr add cafe:2::1/64 dev ogstun
+#    $ sudo ip addr add 2001:230:cafe::1/48 dev ogstun
+#    $ sudo ip addr add 2001:230:babe::1/48 dev ogstun
 #
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/16
-#      - addr: cafe:1::1/64
+#      - addr: 2001:230:cafe::1/48
 #      - addr: 10.46.0.1/16
 #        dnn: volte
-#      - addr: cafe:2::1/64
+#      - addr: 2001:230:babe::1/48
 #        dnn: volte
 #
-#  o Multiple Devices (default: ogstun)
-#    $ sudo ip addr add 10.45.0.1/16 dev ogstun
-#    $ sudo ip addr add cafe:1::1/64 dev ogstun2
-#    $ sudo ip addr add 10.46.0.1/16 dev ogstun3
-#    $ sudo ip addr add cafe:2::1/64 dev ogstun3
-#
-#    pdn:
-#      - addr: 10.45.0.1/16
-#      - addr: cafe:1::1/64
-#        dev: ogstun2
-#      - addr: 10.46.0.1/16
-#        dnn: volte
-#        dev: ogstun3
-#      - addr: cafe:2::1/64
-#        dnn: volte
-#        dev: ogstun3
-#
 #  o Pool Range Sample
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/24
 #        range: 10.45.0.100-10.45.0.200
 #
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/24
 #        range:
 #          - 10.45.0.5-10.45.0.50
 #          - 10.45.0.100-
 #
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/24
 #        range:
 #          - -10.45.0.200
 #          - 10.45.0.210-10.45.0.220
 #
-#    pdn:
+#    subnet:
 #      - addr: 10.45.0.1/16
 #        range:
 #          - 10.45.0.100-10.45.0.200
 #          - 10.45.1.100-10.45.1.200
-#      - addr: cafe::1/64
+#      - addr: 2001:230:cafe::1/48
 #        range:
-#          - cafe::a0-cafe:b0
-#          - cafe::c0-cafe:d0
+#          - 2001:230:cafe:a0::0-2001:230:cafe:b0::0
+#          - 2001:230:cafe:c0::0-2001:230:cafe:d0::0
 #
 ```
 
@@ -693,7 +1042,7 @@ You should configure the domain name on your computer. Otherwise, freeDiameter r
 
 #### How many of UEs can Open5GS support?
 
-See the [lib/core/ogs-3gpp-types.h](https://github.com/{{ site.github_username }}/open5gs/blob/master/lib/core/ogs-3gpp-types.h).
+See the [lib/core/ogs-3gpp-types.h](https://github.com/{{ site.github_username }}/open5gs/blob/main/lib/core/ogs-3gpp-types.h).
 
 ```
 #define MAX_NUM_OF_ENB              128
@@ -731,6 +1080,8 @@ Currently, the number of UE is limited to `128*128`.
 * AUSF : 127.0.0.11
 * UDM : 127.0.0.12
 * PCF : 127.0.0.13
+* NSSF : 127.0.0.14
+* BSF : 127.0.0.15
 * UDR : 127.0.0.20
 ```
 
@@ -774,7 +1125,7 @@ Currently, the number of UE is limited to `128*128`.
 
 ```
 * IPv4 : 10.45.0.1/16
-* IPv6 : cafe::1/64
+* IPv6 : 2001:230:cafe::1/48
 ```
 
 - DNS
@@ -904,3 +1255,33 @@ getsockopt level=132 optname=0 not yet supported
 
 The SCTP module is not included in the QEMU kernel. I believe that if the Linux kernel installed on your target platform contains an SCTP module, it will work normally.
 {: .notice--warning}
+
+#### Cannot open shared object file when running daemon
+
+An error occurred when running as follows.
+
+```
+$ ./install/bin/open5gs-nrfd
+./install/bin/open5gs-nrfd: error while loading shared libraries: libogscrypt.so.2: cannot open shared object file: No such file or directory
+```
+
+You need to specify the absolute path to the shared library as follows.
+
+```bash
+$ echo $(cd $(dirname ./install/lib/x86_64-linux-gnu/) && pwd -P)/$(basename ./install/lib/x86_64-linux-gnu/)
+/home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu
+$ export LD_LIBRARY_PATH=/home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu
+$ ldd ./install/bin/open5gs-amfd
+...
+	libogsapp.so.1 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogsapp.so.1 (0x00007f161ab51000)
+	libogscore.so.1 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogscore.so.1 (0x00007f161a922000)
+	libogssctp.so.1 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogssctp.so.1 (0x00007f161a71d000)
+	libogss1ap.so.1 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogss1ap.so.1 (0x00007f161a519000)
+...
+```
+
+If you want to set the shared library path permanently, you can use ldconfig.
+```bash
+$ sudo sh -c "echo /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu > /etc/ld.so.conf.d/open5gs.conf"
+$ sudo ldconfig
+```

docs/_docs/tutorial/01-your-first-lte.md

@@ -173,9 +173,9 @@ $ sudo apt install open5gs
 The following shows how to install the Web UI of Open5GS.
 
 ```bash
-$ curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash -
+$ curl -fsSL https://deb.nodesource.com/setup_14.x | sudo -E bash -
 $ sudo apt install nodejs
-$ curl -sL https://open5gs.org/open5gs/assets/webui/install | sudo -E bash -
+$ curl -fsSL https://open5gs.org/open5gs/assets/webui/install | sudo -E bash -
 ```
 
 ### Configuration & Running
@@ -222,7 +222,7 @@ Then proceed as follows:
   3. Fill the IMSI, security context(K, OPc, AMF), and APN of the subscriber.
   4. Click `SAVE` Button
 
-Modify [install/etc/open5gs/mme.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/mme.yaml.in) to set the S1AP IP address, PLMN ID, and TAC. 
+Modify [install/etc/open5gs/mme.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/mme.yaml.in) to set the S1AP IP address, PLMN ID, and TAC.
 
 ```diff
 $ diff -u /etc/open5gs/mme.yaml.old /etc/open5gs/mme.yaml
@@ -257,7 +257,7 @@ $ diff -u /etc/open5gs/mme.yaml.old /etc/open5gs/mme.yaml
          ciphering_order : [ EEA0, EEA1, EEA2 ]
 ```
 
-Modify [install/etc/open5gs/sgwu.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/master/configs/open5gs/sgwu.yaml.in) to set the GTP-U IP address.
+Modify [install/etc/open5gs/sgwu.yaml](https://github.com/{{ site.github_username }}/open5gs/blob/main/configs/open5gs/sgwu.yaml.in) to set the GTP-U IP address.
 ```diff
 $ diff -u /etc/open5gs/sgwu.yaml.old /etc/open5gs/sgwu.yaml
 --- sgwu.yaml.old	2020-08-22 12:08:44.782880778 -0400
@@ -308,11 +308,13 @@ target     prot opt source               destination
 Chain POSTROUTING (policy ACCEPT)
 target     prot opt source               destination
 
-### Enable IPv4 Forwarding
-$ sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
+### Enable IPv4/IPv6 Forwarding
+$ sudo sysctl -w net.ipv4.ip_forward=1
+$ sudo sysctl -w net.ipv6.conf.all.forwarding=1
 
 ### Add NAT Rule
 $ sudo iptables -t nat -A POSTROUTING -s 10.45.0.0/16 ! -o ogstun -j MASQUERADE
+$ sudo ip6tables -t nat -A POSTROUTING -s 2001:230:cafe::/48 ! -o ogstun -j MASQUERADE
 ```
 
 **Note:** For the first time, it is a good condition if you do not have any rules in the IP/NAT tables. If a program such as docker has already set up a rule, you will need to add a rule differently.

docs/_docs/tutorial/02-VoLTE-setup.md

@@ -754,22 +754,22 @@ Below startup script can be used for setting up interfaces:
 ```
 #!/bin/bash
 
-sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
-sh -c "echo 1 > /proc/sys/net/ipv6/ip_forward"
+sudo sysctl -w net.ipv4.ip_forward=1
+sudo sysctl -w net.ipv6.conf.all.forwarding=1
 
 ip tuntap add name ogstun mode tun
 ip addr add 192.168.100.1/24 dev ogstun
-ip addr add fd84:6aea:c36e:2b69::/64 dev ogstun
+ip addr add fd84:6aea:c36e:2b69::/48 dev ogstun
 ip link set ogstun mtu 1400
 ip link set ogstun up
 iptables -t nat -A POSTROUTING -s 192.168.100.0/24 ! -o ogstun -j MASQUERADE
-ip6tables -t nat -A POSTROUTING -s fd84:6aea:c36e:2b69::/64 ! -o ogstun -j MASQUERADE
+ip6tables -t nat -A POSTROUTING -s fd84:6aea:c36e:2b69::/48 ! -o ogstun -j MASQUERADE
 iptables -I INPUT -i ogstun -j ACCEPT
 ip6tables -I INPUT -i ogstun -j ACCEPT
 
 ip tuntap add name ogstun2 mode tun
 ip addr add 192.168.101.1/24 dev ogstun2
-ip addr add fd1f:76f3:da9b:0101::/64 dev ogstun2
+ip addr add fd1f:76f3:da9b:0101::/48 dev ogstun2
 ip link set ogstun2 mtu 1400
 ip link set ogstun2 up
 iptables -I INPUT -i ogstun2 -j ACCEPT
@@ -787,6 +787,7 @@ APN Configuration:
 ---------------------------------------------------------------------------------------------------------------------
 | ims      | IPv4 | 5   | 1   | Disabled   | Disabled       | 3850/1530           |                 |               |
 |          |      | 1   | 2   | Enabled    | Enabled        | 128/128             | 128/128         |               |
+|          |      | 2   | 4   | Enabled    | Enabled        | 128/128             | 128/128         |               |
 ---------------------------------------------------------------------------------------------------------------------
 </pre>
 
@@ -1131,13 +1132,13 @@ Visited Network = ims.mnc001.mcc001.3gppnetwork.org
 Click Add
 
 Associate IMPI(s) to IMPU
-IMPI Identity = 001011234567891@ims.mnc001.mcc001.3gppnetwork.org
+IMPI Identity = 001010123456791@ims.mnc001.mcc001.3gppnetwork.org
 Click Add
 
-2. sip:0198765432100
+2. sip:0198765432100@ims.mnc001.mcc001.3gppnetwork.org
 
 Public User Identity -IMPU-
-Identity = sip:0198765432100
+Identity = sip:0198765432100@ims.mnc001.mcc001.3gppnetwork.org
 Service Profile = default_sp
 Charging-Info Set = default_charging_set
 Can Register = Yes
@@ -1150,12 +1151,12 @@ Visited Network = ims.mnc001.mcc001.3gppnetwork.org
 Click Add
 
 Associate IMPI(s) to IMPU
-IMPI Identity = 001011234567891@ims.mnc001.mcc001.3gppnetwork.org
+IMPI Identity = 001010123456791@ims.mnc001.mcc001.3gppnetwork.org
 Click Add
 
-And, finally add these IMPUs as implicit set of IMSI derived IMPU in HSS i.e sip:001011234567891@ims.mnc001.mcc001.3gppnetwork.org as follows:
+And, finally add these IMPUs as implicit set of IMSI derived IMPU in HSS i.e sip:001010123456791@ims.mnc001.mcc001.3gppnetwork.org as follows:
 
-1. Goto to IMPU sip:001011234567891@ims.mnc001.mcc001.3gppnetwork.org
+1. Goto to IMPU sip:001010123456791@ims.mnc001.mcc001.3gppnetwork.org
 2. In "Add IMPU(s) to Implicit-Set" section give IMPU Identity created above to be added to this IMPU
 ```
 

docs/_docs/tutorial/03-VoLTE-dockerized.md

@@ -14,42 +14,31 @@ Setup description:
 #### 0. Introduction
 
 This tutorial introduces an install-and-run lab for Open5GS + Kamailio IMS
-VoLTE study, a follow-up project of [Open5GS Tutorial: VoLTE Setup with Kamailio IMS and Open5GS](https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/). 
-The tutorial is based on Herle Supreeth's [docker_open5gs](https://github.com/herlesupreeth/docker_open5gs) and his fork of Open5GS and Kamailio.
+VoLTE study, a follow-up project of [Open5GS Tutorial: VoLTE Setup with Kamailio IMS and Open5GS](https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/).
 
 The main purpose is to save researchers' and students' time to debug for a
 minimum-viable environment before actual study can be proceeded.
 
 **Important notice before you start**
 
-1. Herle Supreeth's fork of Kamailio is used to support IPsec.
 1. Java 7 is downloaded from an alternative location.  You have to agree with
    Oracle's term of service and have an Oracle account, to legally use Java SDK
    7u80.  By using this repo, I assume you have the legal right to use it and
    hold no liability.
 
-You have to prepare IMSI, Ki, OP (yes, not **OPc**), SQN of your SIM cards.
-Even though Open5GS supports OPc, FHoSS merely takes OP.  You may also want to
-disable SQN checking in the SIM card (even though we are not sure whether it is
-effective.)  Check out https://github.com/herlesupreeth/sysmo-usim-tool for a
-slightly modified sysmo-usim-tool.
-
+You have to prepare IMSI, Ki, OP/OPc, SQN of your SIM cards.
 
 #### 1. Prepare SIM cards for VoLTE
 
-**N.B.**
 1. Wrong KIC / KID / KIK bricks your SIM card.
-1. Use MCC = 001, MNC = 01 for a testing network, unless you know your MCC/MNC is supported by Android Carrier Privileges.
+2. Use MCC = 001, MNC = 01 for a test network, unless you know your MCC/MNC is supported by Android Carrier Privileges.
 
-Refer to: https://osmocom.org/projects/cellular-infrastructure/wiki/VoLTE_IMS_Android_Carrier_Privileges
-* gp --key-enc KIC1 --key-mac KID1 --key-dek KIK1 -lvi
-* gp --key-enc KIC1 --key-mac KID1 --key-dek KIK1 --unlock
+Refer to: https://github.com/herlesupreeth/CoIMS_Wiki/blob/master/README.md
+* gp --key-enc <KIC1> --key-mac <KID1> --key-dek <KIK1> -lvi
+* gp --key-enc <KIC1> --key-mac <KID1> --key-dek <KIK1> --unlock
 * gp --install applet.cap
 * gp -a 00A4040009A00000015141434C0000 -a 80E2900033F031E22FE11E4F06FFFFFFFFFFFFC114E46872F28B350B7E1F140DE535C2A8D5804F0BE3E30DD00101DB080000000000000001
-* gp --acr-list
-
-If you use gp.jar from Herle Supreeth's [CoSIM Wiki](https://github.com/herlesupreeth/CoIMS_Wiki), replace `gp --acr-list` with `gp --acr-list-aram`.
-
+* gp --acr-list-aram
 
 #### 2. Build Open5GS, Kamailio with docker-compose
 
@@ -62,54 +51,76 @@ Install docker-compose and make sure it works before going forward.
 Clone the repository and build base docker images of open5gs and Kamailio:
 
 ```
-git clone https://github.com/miaoski/docker_open5gs
+git clone https://github.com/herlesupreeth/docker_open5gs
 cd docker_open5gs/base
 docker build --no-cache --force-rm -t docker_open5gs .
 
 cd ../kamailio_base
 docker build --no-cache --force-rm -t open5gs_kamailio .
-
-cd ..
-docker-compose build --no-cache
-
-# Copy DNS setting to containers.  Do this whenever you change IP in .env
-./copy-env.sh
-
-# Start MySQL and MongoDB first, in order to initialize the databases
-docker-compose up mongo mysql dns
-
-# To start Open5GS core network without IMS
-docker-compose up hss mme pcrf pgw sgw
-
-# To start IMS
-docker-compose up rtpengine fhoss pcscf icscf scscf
-
-# To test whether DNS is properly running
-./test-dns.sh
 ```
 
-You may want to review `.env` for IP allocation.
+#### 3. Configuring your setup
 
+`.env` is the only file most of them need to edit as per their deployment needs
+{: .notice--warning}
 
-#### 3. (Optional) Run srsENB in a separate container
+Edit only the following parameters in `.env` as per your setup
+
+```
+MCC
+MNC
+TEST_NETWORK --> Change this only if it clashes with the internal network at your home/office
+DOCKER_HOST_IP --> This is the IP address of the host running your docker setup
+SGWU_ADVERTISE_IP --> Change this to value of DOCKER_HOST_IP set above only if eNB is not running the same docker network/host
+```
+
+If eNB is NOT running in the same docker network/host as the host running the dockerized Core + IMS then follow the below additional steps
+
+Under `mme` section in docker compose file (`docker-compose.yaml`, `nsa-deploy.yaml`), uncomment the following part
+
+```
+...
+    # ports:
+    #   - "36412:36412/sctp"
+...
+```
+
+Under `sgwu` section in docker compose file (`docker-compose.yaml`, `nsa-deploy.yaml`), uncomment the following part
+
+```
+...
+    # ports:
+    #   - "2152:2152/udp"
+...
+```
+
+#### 4. Building 4G/5G Core + IMS related components images
+
+```
+cd docker_open5gs
+source .env
+docker-compose build --no-cache
+```
+
+#### 5. (Optional) Run srsENB in a separate container
 
 I use srsENB and USRP B210 in the lab.  Sometimes you may want to restart
 srsENB while keeping the core network running.  It is thus recommended to run
 srsENB separately.
 
-Edit `.env` first to set EARFCN, TX_GAIN, RX_GAIN.  Thereafter,
-
 ```
+cd docker_open5gs
+source .env
 docker-compose -f srsenb.yaml build --no-cache
 docker-compose -f srsenb.yaml up
 ```
 
+#### 6. Configuration and register two UE
 
-#### 4. Configuration and register two UE
-
-The configuration files for each of the Core Network component can be found
-under their respective folder. Edit the .yaml files of the components and run
+If there is a need to change the Core Network component configuration files
+found under their respective folder, make sure to re-compile images using
 `docker-compose build` again.
+{: .notice--warning}
 
 Open (http://<DOCKER_HOST_IP>:3000) in a web browser, where <DOCKER_HOST_IP> is
 the IP of the machine/VM running the open5gs containers. Login with following
@@ -129,14 +140,12 @@ Follow the instructions in [VoLTE Setup](https://open5gs.org/open5gs/docs/tutori
 ![Set both type to IPv4 only](https://raw.githubusercontent.com/miaoski/docker_open5gs/gh-pages/screenshots/subscriber-type-ipv4.png)
 
 For already running systems, copy SQN from Open5GS and type it in FHoSS.  You
-can type SQN in decimal.  FHoSS will automagically convert it to hex.
+can type SQN in decimal. FHoSS will automagically convert it to hex.
 
-Pay special attention to copy/paste.  You might have leading or trailing spaces
+Pay special attention to copy/paste. You might have leading or trailing spaces
 in FHoSS, resulting in failed connections!
 
-
-
-#### 5. Debugging with Wireshark
+#### 7. Debugging with Wireshark
 
 Thanks to Open5GS, the topology is super similar to [SAE on Wikipedia](https://en.wikipedia.org/wiki/System_Architecture_Evolution#/media/File:Evolved_Packet_Core.svg).
 
@@ -174,8 +183,7 @@ order to add xfrm state and policy.
 
 ![401 Unauthorized](https://raw.githubusercontent.com/miaoski/docker_open5gs/gh-pages/screenshots/401-unauthorized.png)
 
-
-#### 6. Successful calls
+#### 8. Successful calls
 
 Herle Supreeth has shared PCAP files of successful calls, including
 - [IPSec UE registration for VoLTE]({{ site.url }}{{ site.baseurl }}/assets/pcapng/ipsec_reg.pcapng)
@@ -230,14 +238,11 @@ Trying, a UE that does not support IPSec is sent a SIP INVITE in clear text:
 
 ![non-ipsec callee](https://raw.githubusercontent.com/miaoski/docker_open5gs/gh-pages/screenshots/ipsec-to-noipsec.png)
 
-
-
-#### 7. Known issues
+#### 9. Known issues
 
 - IPv6 is not supported.
 
-
-#### 8. References
+#### 10. References
 
 - [https://github.com/onmyway133/blog/issues/284](https://github.com/onmyway133/blog/issues/284)
 - [https://realtimecommunication.wordpress.com/2015/05/26/at-your-service/](https://realtimecommunication.wordpress.com/2015/05/26/at-your-service/)

docs/_pages/about.md

@@ -14,15 +14,17 @@ Open5GS is a C-language Open Source implementation of 5GC and EPC, i.e. the core
 - Support of USIM cards using Milenage
 - IPv6 support
 - Multiple PDU session
-- S1/X2 and Xn Handover
+- Handover(5GC Xn/N2 and EPC S1/X2)
 - CSFB(Circuit Switched Fall Back) and SMSoS(SMS Over SGs)
 - VoLTE(Voice over LTE)
 
 #### Known Limitations
 ---
 
-- No OCS/OFCS
+- No VoNR(Voice over NR)
+- No Interworking with EPC
 - No NB-IoT
+- No OCS/OFCS
 - No eMBMS
 - No SRVCC
 - No Roaming

docs/_pages/docs.md

@@ -8,19 +8,11 @@ head_inline: "<style> ul { padding-bottom: 1em; } </style>"
 - User's Guide
   - [Quickstart](guide/01-quickstart)
   - [Building Open5GS from Sources](guide/02-building-open5gs-from-sources)
-  - [Splitting Network Functions](guide/03-splitting-network-functions)
 
 - Tutorials
   - [Your First LTE](tutorial/01-your-first-lte)
-  - [EPC Advanced Example with OpenAirInterface UE/RAN](https://github.com/s5uishida/open5gs_epc_oai_sample_config)
   - [VoLTE Setup with Kamailio IMS and Open5GS](tutorial/02-VoLTE-setup)
   - [Dockerized VoLTE Setup](tutorial/03-VoLTE-dockerized)
-  - [My first 5G Core : Open5GS and UERANSIM](http://nickvsnetworking.com/my-first-5g-core-open5gs-and-ueransim/)
-  - [5GC Advanced Example with UERANSIM](https://github.com/s5uishida/open5gs_5gc_ueransim_sample_config)
-  - [Sending SMS in Open5GS LTE Networks using the SGs Interface and OsmoMSC](https://nickvsnetworking.com/sending-sms-in-open5gs-lte-networks-using-the-sgs-interface-and-osmomsc-with-smsos/)
-  - [OsmoMSC and Open5GS MME – SGs Interface for CSCF / InterRAT Handover](https://nickvsnetworking.com/osmomsc-and-open5gs-mme-sgs-interface-for-cscf-interran-handover/)
-  - [Static IPs for UEs](http://nickvsnetworking.com/open5gs-epc-static-ip-addresses-for-ues-apns-subscribers/)
-  - [Kubernetes Open5GS Deployment](https://dev.to/infinitydon/virtual-4g-simulation-using-kubernetes-and-gns3-3b7k?fbclid=IwAR1p99h13a-mCfejanbBQe0H0-jp5grXkn5mWf1WrTHf47UtegB2-UHGGZQ)
 
 - Troubleshooting
   - [Simple Issues](troubleshoot/01-simple-issues)
@@ -30,8 +22,24 @@ head_inline: "<style> ul { padding-bottom: 1em; } </style>"
   - [Debian/Ubuntu](platform/01-debian-ubuntu)
   - [CentOS](platform/02-centos)
   - [Fedora](platform/03-fedora)
-  - [MacOSX](platform/05-macosx)
+  - [MacOSX(Apple Silicon)](platform/05-macosx-apple-silicon)
+  - [MacOSX(Intel)](platform/06-macosx-intel)
+  - [FreeBSD](platform/07-freebsd)
+  - [Alpine](platform/08-alpine)
   
 - Hardware Specific Notes
-  - [Tested e/gNodeBs](hardware/01-genodebs)
+  - [eNodeBs/gNodeBs tested on Open5GS](hardware/01-genodebs)
   
+- @infinitydon
+  - [Kubernetes Open5GS Deployment](https://dev.to/infinitydon/virtual-4g-simulation-using-kubernetes-and-gns3-3b7k?fbclid=IwAR1p99h13a-mCfejanbBQe0H0-jp5grXkn5mWf1WrTHf47UtegB2-UHGGZQ)
+
+- @nickvsnetworking
+  - [My first 5G Core : Open5GS and UERANSIM](http://nickvsnetworking.com/my-first-5g-core-open5gs-and-ueransim/)
+  - [Sending SMS in Open5GS LTE Networks using the SGs Interface and OsmoMSC](https://nickvsnetworking.com/sending-sms-in-open5gs-lte-networks-using-the-sgs-interface-and-osmomsc-with-smsos/)
+  - [OsmoMSC and Open5GS MME – SGs Interface for CSCF / InterRAT Handover](https://nickvsnetworking.com/osmomsc-and-open5gs-mme-sgs-interface-for-cscf-interran-handover/)
+  - [Static IPs for UEs](http://nickvsnetworking.com/open5gs-epc-static-ip-addresses-for-ues-apns-subscribers/)
+
+- @s5uishida
+  - [EPC Advanced Example with OpenAirInterface UE/RAN](https://github.com/s5uishida/open5gs_epc_oai_sample_config)
+  - [5GC Advanced Example with UERANSIM](https://github.com/s5uishida/open5gs_5gc_ueransim_sample_config)
+

docs/_posts/2020-03-25-release-v1.2.2.md

@@ -79,7 +79,7 @@ pgw:
       - addr: ::1
     ue_pool:
       - addr: 10.45.0.1/16
-      - addr: cafe::1/64
+      - addr: 2001:230:cafe::1/48
     dns:
       - 8.8.8.8
       - 8.8.4.4

docs/_posts/2021-01-18-release-v2.1.4.md

@@ -0,0 +1,23 @@
+---
+title: "v2.1.4 - Paging was added"
+date: 2021-01-18 21:23:00 -0500
+categories:
+  - Release
+tags:
+  - News
+  - Release
+head_inline: "<style> ul { padding-bottom: 1em; } </style>"
+---
+
+#### New feature
+- [5GC] Paging ([c9363b1](https://github.com/open5gs/open5gs/commit/c9363b132093581b6fd2ce794aa63cd597bf83a6))
+
+#### Enhancement
+- [PFCP] Legacy support for pre-release LTE11 devices while performing VoLTE call([#757](https://github.com/open5gs/open5gs/pull/757)) -- [herlesupreeth](https://github.com/herlesupreeth)
+
+#### Bug Fixes
+- [EPC] Use ESM cause(43:Invalid EPS bearer identity) if SGW-C sends GTP cause(Context Not Found) ([#755](https://github.com/open5gs/open5gs/issues/755)) -- [herlesupreeth](https://github.com/herlesupreeth)
+- [MME] fix a bug where SCTP stream number was not set while sending S1-Paging message. ([c9363b1](https://github.com/open5gs/open5gs/commit/c9363b132093581b6fd2ce794aa63cd597bf83a6))
+
+Download -- [v2.1.4.tar.gz](https://github.com/open5gs/open5gs/archive/v2.1.4.tar.gz)
+{: .notice--info}

docs/_posts/2021-02-02-release-v2.1.5.md

@@ -0,0 +1,29 @@
+---
+title: "v2.1.5 - 5G Core N2 based handover"
+date: 2021-02-02 14:52:00 -0500
+categories:
+  - Release
+tags:
+  - News
+  - Release
+head_inline: "<style> ul { padding-bottom: 1em; } </style>"
+---
+
+#### New feature
+- [5GC] N2 Handver ([49a9e58](https://github.com/open5gs/open5gs/commit/49a9e58efe3f6ecd482c3b77b98cd0841688b647), [ff5236f](https://github.com/open5gs/open5gs/commit/ff5236f3e01ee6984bc78eaacc7d84e08c321266))
+
+#### Enhancement
+- [AMF/MME] Check IMEISV length == 16 digits ([388e642](https://github.com/open5gs/open5gs/commit/388e64213fcebc257eb7bd0223105c3055c56252))
+- [AMF] Add Handling Duplicated PDU Session ID ([d9417be](https://github.com/open5gs/open5gs/commit/d9417be9a62255efa91a11ee2c424ec1e739b919))
+- [ASN] S1AP/NGAP update to v16.4.0(2021-01-04) ([ada01fc](https://github.com/open5gs/open5gs/commit/ada01fca8ffaea029d2ae04e6bc1bb499ab37894))
+- [AMF/MME] Add UserLocation Handling in UplinkNASTransport ([#772](https://github.com/open5gs/open5gs/pull/772)) -- [zhonglin6666](https://github.com/zhonglin6666)
+
+#### Bug Fixes
+- [UDR] Modify SmfSelectionSubscriptionData ([#785](https://github.com/open5gs/open5gs/pull/785)) -- [zhonglin6666](https://github.com/zhonglin6666)
+- [MME] ENBDirectInformationTransfer decoding problem ([#783](https://github.com/open5gs/open5gs/issues/783)) -- [kuanghanqian](https://github.com/kuanghanqian)
+- [AMF] PartOfNG-Interface in NGReset decoding problem ([#773](https://github.com/open5gs/open5gs/issues/773)) -- [acetcom](https://github.com/acetcom)
+- [AMF] Fix UE Context Request IE Handling ([#771](https://github.com/open5gs/open5gs/issues/771)) -- [kuanghanqian](https://github.com/kuanghanqian)
+- [5GC] Fix the AMF/SMF/UDM crash issues ([#770](https://github.com/open5gs/open5gs/issues/770), [#771](https://github.com/open5gs/open5gs/issues/771)) -- [kuanghanqian](https://github.com/kuanghanqian)
+
+Download -- [v2.1.5.tar.gz](https://github.com/open5gs/open5gs/archive/v2.1.5.tar.gz)
+{: .notice--info}

docs/_posts/2021-02-08-release-v2.1.7.md

@@ -0,0 +1,22 @@
+---
+title: "v2.1.7 - 5G Core Hotfix"
+date: 2021-02-07 22:31:00 -0500
+categories:
+  - Release
+tags:
+  - News
+  - Release
+head_inline: "<style> ul { padding-bottom: 1em; } </style>"
+---
+
+#### Bug Fixes
+- [5GC/EPC] Pool size adjusted to support 1,024 UEs ([#753](https://github.com/open5gs/open5gs/issues/753)) -- [zhouxiang93123](https://github.com/zhouxiang93123)
+- [AMF] Crash during handling Duplicated PDU Session ID ([#793](https://github.com/open5gs/open5gs/issues/783)) -- [kuanghanqian](https://github.com/kuanghanqian)
+
+#### New Platform
+- MacOSX with Apple M1 Silicon ([7901a1](https://github.com/open5gs/open5gs/commit/7901a1164fdaa04cf72a5a944f50474d569f619d))
+- FreeBSD ([852756](https://github.com/open5gs/open5gs/commit/852756f90222a8e0821f6e1994baa32eafbdc47c))
+
+
+Download -- [v2.1.7.tar.gz](https://github.com/open5gs/open5gs/archive/v2.1.7.tar.gz)
+{: .notice--info}

docs/_posts/2021-03-08-release-v2.2.0.md

@@ -0,0 +1,30 @@
+---
+title: "v2.2.0 - DB Schema Changes"
+date: 2021-03-08 21:35:00 +0900
+categories:
+  - Release
+tags:
+  - News
+  - Release
+head_inline: "<style> ul { padding-bottom: 1em; } </style>"
+---
+
+#### DB Schema Changes
+- No backward compatibility. If you are using an old subscription DB, you should change to the new DB schema.
+
+#### New features
+- NSSF(Network Slice Selection Function) is added.
+- SMF selection is added.
+
+#### Enhancement
+- [DB] Masking MongoDB credentials when logging ([#827](https://github.com/open5gs/open5gs/pull/827)) -- [cglewis](https://github.com/cglewis)
+- [EPC/5GC] Branch name changes from master to main ([#811](https://github.com/open5gs/open5gs/pull/811)) -- [PawelMack](https://github.com/PawelMack)
+- [AMF] Cause of UEContextRelaseCommand uses Cause of UEContextReleaseRequest ([#789](https://github.com/open5gs/open5gs/issues/789)) -- [PawelMack](https://github.com/PawelMack)
+
+#### Bug Fixes
+- [SMF] Fix the bug for DataForwardingNotPossible ([31977bf](https://github.com/open5gs/open5gs/commit/31977bf30a396389557c8be0f82cfdfb8152d580))
+- [AMF] Fix the exception handling routine when UE/gNB repeatedly sends NGAP messages ([#804](https://github.com/open5gs/open5gs/issues/804)) -- [strongcourage](https://github.com/strongcourage)
+
+
+Download -- [v2.2.0.tar.gz](https://github.com/open5gs/open5gs/archive/v2.2.0.tar.gz)
+{: .notice--info}

docs/_posts/2021-03-15-release-v2.2.1.md

@@ -0,0 +1,31 @@
+---
+title: "v2.2.1 - UE IPv6 Support"
+date: 2021-03-15 09:38:00 +0900
+categories:
+  - Release
+tags:
+  - News
+  - Release
+head_inline: "<style> ul { padding-bottom: 1em; } .blue { color: blue; }</style>"
+---
+
+#### IMPORTANT
+
+To use the new WebUI v2.2.1, you have to log out and log back in to reset your browser token information.
+{: .blue}
+
+#### UE IPv6 Support
+- If the SMF receives Router Solicitation Message through UPF, it sends Router Advertisement Message to the UE through UPF.
+- If the UPF matches the IPv6 Prefix instead of Full IPv6 address, it forwards the packet to the UE. ([#808](https://github.com/open5gs/open5gs/issues/808)) -- [kbarlee](https://github.com/kbarlee), [byteburner](https://github.com/byteburner) 
+
+#### Enhancement
+- Adding API tokens to WebUI to improve security vulnerabilities ([#838](https://github.com/open5gs/open5gs/pull/838)) -- [rashley-iqt](https://github.com/rashley-iqt)
+
+#### Bug Fixes
+- [AMF] Fixed a problem that occurs when the UE does not send S-NSSAI in UL NAS Transport message ([#845](https://github.com/open5gs/open5gs/issues/845)) -- [mcatalancid](https://github.com/mcatalancid)
+- [AMF] Fixed a problem that occurs when the UE does not send Request-NSSAI in Registration request([#844](https://github.com/open5gs/open5gs/issues/844)) -- [ggardikis](https://github.com/ggardikis)
+- [MME] Fixed the infinit loop related to Delete-Session-Request ([#568](https://github.com/open5gs/open5gs/issues/568)) -- [domgth](https://github.com/domgth)
+
+
+Download -- [v2.2.1.tar.gz](https://github.com/open5gs/open5gs/archive/v2.2.1.tar.gz)
+{: .notice--info}

docs/_posts/2021-04-09-release-v2.2.6.md

@@ -0,0 +1,93 @@
+---
+title: "v2.2.6 - HSS Cx Added"
+date: 2021-04-09 21:15:00 +0900
+categories:
+  - Release
+tags:
+  - News
+  - Release
+head_inline: "<style> ul { padding-bottom: 1em; } .blue { color: blue; }</style>"
+---
+
+#### New Features
+- [HSS] Cx Interface Added
+- [EPC] Added E-RABModificationIndication/E-RABModificationConfirm ([#834](https://github.com/open5gs/open5gs/issues/834)) -- [alf-askey](https://github.com/alf-askey) 
+- [ALL] Advertising address for all SBI and GTP-U interfaces ([#825](https://github.com/open5gs/open5gs/issues/825)) -- [infinitydon](https://github.com/infinitydon) 
+
+#### Enhancement
+- [MME/AMF] Added SACK_DELAY_TIME in the AMF/MME configuration files ([#895](https://github.com/open5gs/open5gs/issues/895)) -- [RafalArciszewski](https://github.com/RafalArciszewski) 
+- [DB] Updated Python Lib docs and script to migrate DB data to new format ([#889](https://github.com/open5gs/open5gs/pull/889)) -- [nickvsnetworking](https://github.com/nickvsnetworking) 
+
+#### Bug Fixes
+- [AMF] Fixed a crash when gNB with 40+ connected UE's disconnect ([#925](https://github.com/open5gs/open5gs/issues/925)) -- [Spectranis](https://github.com/Spectranis)
+- [WebUI] Fixed the installation script for solving the debian mongod dependency problem ([#915](https://github.com/open5gs/open5gs/issues/915)) -- [iman432](https://github.com/iman432)
+- [AMF] Fixed a crash for unknown timezone offset  ([#914](https://github.com/open5gs/open5gs/issues/914)) -- [iman432](https://github.com/iman432)
+- [AMF] Always Include Allow NSSAI in Registration accept ([#910](https://github.com/open5gs/open5gs/issues/910)) -- [chliny2016](https://github.com/chliny2016)
+- [freeDiameter] A crash has been fixed when using a version prior to v2.2.3 ([#898](https://github.com/open5gs/open5gs/issues/898)) -- [Nour963](https://github.com/Nour963), [kbarlee](https://github.com/kbarlee)
+- [AMF] Fixed a crash when a lot of number simultaneous connections occur. ([#886](https://github.com/open5gs/open5gs/issues/886)) -- [dongzx666](https://github.com/dongzx666)
+- [MME/AMF] Fixed a bug when S-TMSI does not exist in InitialUEMessage ([#890](https://github.com/open5gs/open5gs/issues/890)) -- [chliny2016](https://github.com/chliny2016) 
+- [MME] Fix an issue where Modify Bearer Request was not sent ([#885](https://github.com/open5gs/open5gs/issues/885)) -- [RafalArciszewski](https://github.com/RafalArciszewski) 
+- [PFCP/GTP] Fix to be able to ignore unknown TLV type ([#871](https://github.com/open5gs/open5gs/issues/871)) -- [infinitydon](https://github.com/infinitydon) 
+- [IMS] Fix the problem with managingg multiple calls ([#869](https://github.com/open5gs/open5gs/issues/869)) -- [ngvoice](https://github.com/ngvoice) 
+- [AMF] Fix creating allowed-NSSAI ([#859](https://github.com/open5gs/open5gs/issues/859)) -- [AniketTiw](https://github.com/AniketTiw) 
+- [5GC] When PDR is created without deleting session, there is a bug to create new PDR. ([#860](https://github.com/open5gs/open5gs/issues/860)) -- [kbarlee](https://github.com/kbarlee) 
+- [NSSF] Add default NSI configuration for NSSF ([#859](https://github.com/open5gs/open5gs/issues/859)) -- [AniketTiw](https://github.com/AniketTiw) 
+- [MME] Fixed the MME crash during HandoverCancel without Target eNB ([#855](https://github.com/open5gs/open5gs/issues/855)) -- [kuanghanqian](https://github.com/kuanghanqian) 
+
+#### IMPORTANT Using v2.2.x
+
+- **DB Schema Changes:** If you are using an existing subscription DB, you should delete the existing DB. Then you can add a new subscription DB.
+{: .blue}
+```
+$ mongo
+> use open5gs
+switched to db open5gs
+> db.subscribers.drop()
+true
+```
+
+- **The New WebUI:** You have to log out using the old WebUI backend/frontend. Then, you can log back in again using the new WebUI backend/frontend.
+{: .blue}
+```
+$ git checkout v2.1.7
+$ cd webui
+$ rm -Rf ./node_modules
+$ npm ci --no-optional
+$ npm run dev
+
+## You should log out
+
+$ git checkout main
+$ cd webui
+$ rm -Rf ./node_modules
+$ npm ci --no-optional
+$ npm run dev
+
+## You can log back in
+```
+
+- freeDiameter version has changed from 1.3.2 to 1.5.0. If you want to compile the source code, you need to update meson subprojects as shown below.
+{: .blue}
+
+```
+$ cd open5gs
+$ git pull
+$ meson subprojects update
+$ cd build
+$ ninja
+```
+
+Or just use a clean github repository.
+
+```
+$ rm -Rf open5gs
+$ git clone https://github.com/open5gs/open5gs
+$ cd open5gs
+$ meson build --prefix=`pwd`/install
+$ cd build
+$ ninja
+```
+
+
+Download -- [v2.2.6.tar.gz](https://github.com/open5gs/open5gs/archive/v2.2.6.tar.gz)
+{: .notice--info}

docs/_posts/2021-04-30-release-v2.2.7.md

@@ -0,0 +1,87 @@
+---
+title: "v2.2.7 - Tested with 500 UEs simultaneous connection"
+date: 2021-04-30 14:29:00 +0900
+categories:
+  - Release
+tags:
+  - News
+  - Release
+head_inline: "<style> ul { padding-bottom: 1em; } .blue { color: blue; }</style>"
+---
+
+#### Bug Fixes
+- [ALL] 500 UEs simultaneous connection test with [UERANSIM](https://github.com/aligungr/UERANSIM) ([#949](https://github.com/open5gs/open5gs/issues/949)) -- [chenhao5651](https://github.com/chenhao5651)
+- [MME] Fix the Invalid AMBR Unit ([#967](https://github.com/open5gs/open5gs/issues/967)) -- [matt9j](https://github.com/matt9j)
+- [PFCP] Fix the DNS delay during PFCP association ([#891](https://github.com/open5gs/open5gs/issues/891)) -- [DendoD96](https://github.com/DendoD96)
+- [Cx] Change the order of IMPUs sent in XML ([#921](https://github.com/open5gs/open5gs/issues/921)) -- [herlesupreeth](https://github.com/herlesupreeth)
+- [PFCP] Changed the PFCP RR selection method ([#953](https://github.com/open5gs/open5gs/issues/953)) -- [infinitydon](https://github.com/infinitydon)
+- [ALL] Changed the terminate sequence to avoid crash when an invalid IP address is configured ([#938](https://github.com/open5gs/open5gs/issues/938)) -- [myonlystarWang](https://github.com/myonlystarWang)
+- [Docker] Update WebUI version to latest ([#945](https://github.com/open5gs/open5gs/issues/945)) -- [rriggio](https://github.com/rriggio)
+
+#### Enhancement
+- [MME/AMF] Retransmission on timer expiration for Registration accept / Attach accept
+- [MME/AMF] GUTI generation changed ([#910](https://github.com/open5gs/open5gs/issues/910)) -- [chliny2016](https://github.com/chliny2016) 
+- [DB] Update open5gs-dbctl ([#940](https://github.com/open5gs/open5gs/pull/940)) -- [Spectranis](https://github.com/Spectranis) 
+
+#### New Features
+- [DB] Added DB migration script ([#956](https://github.com/open5gs/open5gs/pull/956), [#968](https://github.com/open5gs/open5gs/pull/968)) -- [matt9j](https://github.com/matt9j) 
+- [AMF] Added RANConfigurationUpdate ([#943](https://github.com/open5gs/open5gs/issues/943)) -- [navidsol9](https://github.com/navidsol9) 
+
+
+#### IMPORTANT Using v2.2.x
+
+- **DB Schema Changes:** If you are using an existing subscription DB, you should delete the existing DB. Then you can add a new subscription DB.
+{: .blue}
+```
+$ mongo
+> use open5gs
+switched to db open5gs
+> db.subscribers.drop()
+true
+```
+
+- **The New WebUI:** You have to log out using the old WebUI backend/frontend. Then, you can log back in again using the new WebUI backend/frontend.
+{: .blue}
+```
+$ git checkout v2.1.7
+$ cd webui
+$ rm -Rf ./node_modules
+$ npm ci --no-optional
+$ npm run dev
+
+## You should log out
+
+$ git checkout main
+$ cd webui
+$ rm -Rf ./node_modules
+$ npm ci --no-optional
+$ npm run dev
+
+## You can log back in
+```
+
+- freeDiameter version has changed from 1.3.2 to 1.5.0. If you want to compile the source code, you need to update meson subprojects as shown below.
+{: .blue}
+
+```
+$ cd open5gs
+$ git pull
+$ meson subprojects update
+$ cd build
+$ ninja
+```
+
+Or just use a clean github repository.
+
+```
+$ rm -Rf open5gs
+$ git clone https://github.com/open5gs/open5gs
+$ cd open5gs
+$ meson build --prefix=`pwd`/install
+$ cd build
+$ ninja
+```
+
+
+Download -- [v2.2.7.tar.gz](https://github.com/open5gs/open5gs/archive/v2.2.7.tar.gz)
+{: .notice--info}

docs/_posts/2021-05-09-release-v2.2.8.md

@@ -0,0 +1,83 @@
+---
+title: "v2.2.8 - Security Protection"
+date: 2021-05-09 11:27:00 +0900
+categories:
+  - Release
+tags:
+  - News
+  - Release
+head_inline: "<style> ul { padding-bottom: 1em; } .blue { color: blue; }</style>"
+---
+
+#### Bug Fixes
+- [AMF] Distinguish between Cleartext and Non-cleartext IEs ([#958](https://github.com/open5gs/open5gs/issues/958), [UERANSIM#316](https://github.com/aligungr/UERANSIM/issues/316)) -- [p1-bmu](https://github.com/p1-bmu), [aligungr](https://github.com/aligungr)
+- [AMF] Fix SBI convert error for ng_ap_cause ([UERANSIM#316](https://github.com/aligungr/UERANSIM/issues/316)) -- [aligungr](https://github.com/aligungr)
+- [AMF] Allocate ngKSI other than the value already used ([UERANSIM#316](https://github.com/aligungr/UERANSIM/issues/316)) -- [aligungr](https://github.com/aligungr)
+- [AMF] fix the UE-AMBR usage in NGAP message ([#979](https://github.com/open5gs/open5gs/issues/979)) -- [mcatalancid](https://github.com/mcatalancid)
+- [SMF/UPF] Add assertion for getprotobyname() error when decoding IPFilterRule ([#977](https://github.com/open5gs/open5gs/issues/977)) -- [herlesupreeth](https://github.com/herlesupreeth)
+- [MME/SGW-C] Fix the bug of encoding GTPv2 PLMN-ID ([#969](https://github.com/open5gs/open5gs/issues/969)) -- [gusbourg](https://github.com/gusbourg)
+- [MME] Fix the bug of encoding NAS AMBR ([#967](https://github.com/open5gs/open5gs/issues/967)) -- [matt9j](https://github.com/matt9j)
+- [AMF] Protetion of malformed NGAP message ([#960](https://github.com/open5gs/open5gs/issues/960)) -- [p1-bmu](https://github.com/p1-bmu)
+- [AMF] Protetion of malformed NAS message ([#959](https://github.com/open5gs/open5gs/issues/959)) -- [p1-bmu](https://github.com/p1-bmu)
+- [WebUI] fix the security flaw in default admin account ([#764](https://github.com/open5gs/open5gs/issues/764)) -- [martinzhou2015](https://github.com/martinzhou2015)
+
+#### New Features
+- [OS] Support Alpine ([#957](https://github.com/open5gs/open5gs/pull/957), [#968](https://github.com/open5gs/open5gs/pull/968)) -- [venkatpilla](https://github.com/venkatpilla)
+
+#### IMPORTANT Using v2.2.x
+
+- **DB Schema Changes:** If you are using an existing subscription DB, you should delete the existing DB. Then you can add a new subscription DB.
+{: .blue}
+```
+$ mongo
+> use open5gs
+switched to db open5gs
+> db.subscribers.drop()
+true
+```
+
+- **The New WebUI:** You have to log out using the old WebUI backend/frontend. Then, you can log back in again using the new WebUI backend/frontend.
+{: .blue}
+```
+$ git checkout v2.1.7
+$ cd webui
+$ rm -Rf ./node_modules
+$ npm ci --no-optional
+$ npm run dev
+
+## You should log out
+
+$ git checkout main
+$ cd webui
+$ rm -Rf ./node_modules
+$ npm ci --no-optional
+$ npm run dev
+
+## You can log back in
+```
+
+- freeDiameter version has changed from 1.3.2 to 1.5.0. If you want to compile the source code, you need to update meson subprojects as shown below.
+{: .blue}
+
+```
+$ cd open5gs
+$ git pull
+$ meson subprojects update
+$ cd build
+$ ninja
+```
+
+Or just use a clean github repository.
+
+```
+$ rm -Rf open5gs
+$ git clone https://github.com/open5gs/open5gs
+$ cd open5gs
+$ meson build --prefix=`pwd`/install
+$ cd build
+$ ninja
+```
+
+
+Download -- [v2.2.8.tar.gz](https://github.com/open5gs/open5gs/archive/v2.2.8.tar.gz)
+{: .notice--info}

docs/_posts/2021-05-19-release-v2.2.9.md

@@ -0,0 +1,77 @@
+---
+title: "v2.2.9 - Ubuntu 21.04(hirsute) Release"
+date: 2021-05-19 14:13:00 +0900
+categories:
+  - Release
+tags:
+  - News
+  - Release
+head_inline: "<style> ul { padding-bottom: 1em; } .blue { color: blue; }</style>"
+---
+
+#### Bug Fixes
+- [AMF] Fix the bug related to Cleartext and Non-cleartext IEs 
+([#1006](https://github.com/open5gs/open5gs/issues/1006), [#958](https://github.com/open5gs/open5gs/issues/958), [UERANSIM#316](https://github.com/aligungr/UERANSIM/issues/316)) -- [ramonss](https://github.com/ramonss), [p1-bmu](https://github.com/p1-bmu), [aligungr](https://github.com/aligungr)
+- [AMF] Add protection code for message(asn1c, nas, gtp, pfcp) encoding ([#991](https://github.com/open5gs/open5gs/issues/991)) -- [shuimoshusheng](https://github.com/shuimoshusheng)
+- [MME] Packet filter (flow) precedence should be assigned within the session, not bearer. ([#1001](https://github.com/open5gs/open5gs/pull/1001)) -- [herlesupreeth](https://github.com/herlesupreeth)
+- [MME/SGW-C/SGW-U/SMF/UPF] Force shutdown when UDP port duplicated with other process ([#986](https://github.com/open5gs/open5gs/issues/986), [#992](https://github.com/open5gs/open5gs/issues/992)) -- [ybouhamza](https://github.com/ybouhamza), [polhenarejos](https://github.com/polhenarejos)
+- [AMF] Fix the error of decoding Extended-RANNodeName ([#994](https://github.com/open5gs/open5gs/issues/994)) -- [fefer](https://github.com/fefer)
+- [AMF] Add more buffer for 5GMM capability ([#959](https://github.com/open5gs/open5gs/issues/959)) -- [p1-bmu](https://github.com/p1-bmu)
+
+#### IMPORTANT Using v2.2.x
+
+- **DB Schema Changes:** If you are using an existing subscription DB, you should delete the existing DB. Then you can add a new subscription DB.
+{: .blue}
+```
+$ mongo
+> use open5gs
+switched to db open5gs
+> db.subscribers.drop()
+true
+```
+
+- **The New WebUI:** You have to log out using the old WebUI backend/frontend. Then, you can log back in again using the new WebUI backend/frontend.
+{: .blue}
+```
+$ git checkout v2.1.7
+$ cd webui
+$ rm -Rf ./node_modules
+$ npm ci --no-optional
+$ npm run dev
+
+## You should log out
+
+$ git checkout main
+$ cd webui
+$ rm -Rf ./node_modules
+$ npm ci --no-optional
+$ npm run dev
+
+## You can log back in
+```
+
+- freeDiameter version has changed from 1.3.2 to 1.5.0. If you want to compile the source code, you need to update meson subprojects as shown below.
+{: .blue}
+
+```
+$ cd open5gs
+$ git pull
+$ meson subprojects update
+$ cd build
+$ ninja
+```
+
+Or just use a clean github repository.
+
+```
+$ rm -Rf open5gs
+$ git clone https://github.com/open5gs/open5gs
+$ cd open5gs
+$ meson build --prefix=`pwd`/install
+$ cd build
+$ ninja
+```
+
+
+Download -- [v2.2.9.tar.gz](https://github.com/open5gs/open5gs/archive/v2.2.9.tar.gz)
+{: .notice--info}

docs/_posts/2021-06-08-release-v2.3.0.md

@@ -0,0 +1,27 @@
+---
+title: "v2.3.0 - BSF Added in 5G Core"
+date: 2021-06-08 21:37:00 +0900
+categories:
+  - Release
+tags:
+  - News
+  - Release
+head_inline: "<style> ul { padding-bottom: 1em; } .blue { color: blue; }</style>"
+---
+
+#### New Features
+- [BSF] New NF is added ([commit-6119867](https://github.com/open5gs/open5gs/commit/fe89f7cd11d415ae89da2724fc67aa573efa83c3))
+- [UPF] Support TAP interfaces with ARP/ND ([#1022](https://github.com/open5gs/open5gs/pull/1022)) -- [anarkiwi](https://github.com/anarkiwi)
+
+#### Enhancement
+- [ALL] Add more memory log ([commit-118d62d](https://github.com/open5gs/open5gs/commit/118d62d42df5037665b93698cfaa67d34a7519ec))
+- [ALL] Add more error log ([commit-80a9497](https://github.com/open5gs/open5gs/commit/80a9497afdefe72e9deacbaa66ebc1c203de23ea))
+
+#### Bug Fixes
+- [SMF] Fix the crash bug ([#1034](https://github.com/open5gs/open5gs/issues/1034), [#1006](https://github.com/open5gs/open5gs/issues/1006)) -- [mcatalancid](https://github.com/mcatalancid), [ramonss](https://github.com/ramonss)
+- [SBI] Fix the default SBI port number([#1008](https://github.com/open5gs/open5gs/issues/1008), [#997](https://github.com/open5gs/open5gs/issues/997)) -- [mmailand](https://github.com/mmailand), [plutec](https://github.com/plutec)
+- [SMF] Fix DRB lost issue when additional TFTs needs to be added to existing bearer with TFTs ([#1019](https://github.com/open5gs/open5gs/pull/1019)) -- [herlesupreeth](https://github.com/herlesupreeth)
+
+
+Download -- [v2.3.0.tar.gz](https://github.com/open5gs/open5gs/archive/v2.3.0.tar.gz)
+{: .notice--info}

docs/assets/webui/install

@@ -4,13 +4,13 @@
 #
 # Run as root or insert `sudo -E` before `bash`:
 #
-# curl -sL http://open5gs.org/static/setup_3.x | bash -
+# curl -fsSL https://open5gs.org/open5gs/assets/webui/install | sudo -E bash -
 #   or
-# wget -qO- http://open5gs.org/static/setup_3.x | bash -
+# wget -qO- https://open5gs.org/open5gs/assets/webui/install | sudo -E bash -
 #
 
 PACKAGE="open5gs"
-VERSION="2.0.0"
+VERSION="2.2.8"
 
 print_status() {
     echo
@@ -68,16 +68,28 @@ exec_cmd() {
 }
 
 uninstall() {
-exec_cmd_nobail "deb-systemd-invoke stop open5gs-webui"
-exec_cmd_nobail "systemctl disable open5gs-webui"
-exec_cmd_nobail "rm -f /lib/systemd/system/${PACKAGE}-webui.service"
-exec_cmd_nobail "systemctl daemon-reload"
+if [ -f /lib/systemd/system/${PACKAGE}-webui.service ]; then
+    STATUS="$(systemctl is-active open5gs-webui.service)"
+    if [ "${STATUS}" = "active" ]; then
+        exec_cmd_nobail "deb-systemd-invoke stop open5gs-webui"
+    fi
+
+    STATUS="$(systemctl is-enabled open5gs-webui.service)"
+    if [ "${STATUS}" = "enabled" ]; then
+        exec_cmd_nobail "systemctl disable open5gs-webui"
+    fi
+
+    exec_cmd_nobail "rm -f /lib/systemd/system/${PACKAGE}-webui.service"
+    exec_cmd_nobail "systemctl daemon-reload"
+fi
+
+if [ -d /usr/lib/node_modules/${PACKAGE} ]; then
+    exec_cmd_nobail "rm -rf /usr/lib/node_modules/${PACKAGE}"
+fi
 
-exec_cmd "rm -rf ./${PACKAGE}-${VERSION}"
-exec_cmd "rm -rf /usr/lib/node_modules/${PACKAGE}"
 }
 
-setup() {
+preinstall() {
 
 PRE_INSTALL_PKGS=""
 
@@ -228,7 +240,7 @@ if [[ $RC != 0 ]]; then
 fi
 
 print_status "Build the Open5GS WebUI..."
-exec_cmd "cd ./${PACKAGE}-${VERSION}/webui && npm install && npm run build"
+exec_cmd "cd ./${PACKAGE}-${VERSION}/webui && npm ci --no-optional && npm run build"
 
 print_status "Install the Open5GS WebUI..."
 exec_cmd "mv ./${PACKAGE}-${VERSION}/webui /usr/lib/node_modules/${PACKAGE}"
@@ -237,8 +249,7 @@ exec_cmd_nobail "chown -R open5gs:open5gs /usr/lib/node_modules/${PACKAGE}"
 exec_cmd "cat << EOF > /lib/systemd/system/open5gs-webui.service
 [Unit]
 Description=Open5GS WebUI
-BindTo=mongodb.service
-After=networking.service mongodb.service
+Wants=mongodb.service mongod.service
 
 [Service]
 Type=simple
@@ -260,6 +271,23 @@ exec_cmd "deb-systemd-invoke start open5gs-webui"
 exec_cmd "rm -rf ./${PACKAGE}-${VERSION}"
 }
 
+postinstall() {
+
+print_status "Default Administrator Account [Username:admin, Password:1423]..."
+
+exec_cmd "cat << EOF > ./account.js
+db = db.getSiblingDB('open5gs')
+cursor = db.accounts.find()
+if ( cursor.count() == 0 ) {
+    db.accounts.insert({ salt: 'f5c15fa72622d62b6b790aa8569b9339729801ab8bda5d13997b5db6bfc1d997', hash: '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', username: 'admin', roles: [ 'admin' ], "__v" : 0})
+}
+EOF"
+exec_cmd "mongo open5gs ./account.js"
+exec_cmd "rm -f ./account.js"
+}
+
 ## Defer setup until we have the complete script
-setup
+uninstall
+preinstall
 install
+postinstall

docs/assets/webui/uninstall

@@ -4,9 +4,9 @@
 #
 # Run as root or insert `sudo -E` before `bash`:
 #
-# curl -sL http://open5gs.org/static/uninstall_webui.sh | bash -
+# curl -fsSL https://open5gs.org/open5gs/assets/webui/uninstall | sudo -E bash -
 #   or
-# wget -qO- http://open5gs.org/static/uninstall_webui.shx | bash -
+# wget -qO- https://open5gs.org/open5gs/assets/webui/uninstall | sudo -E bash -
 #
 
 exec_cmd_nobail() {

lib/app/ogs-app.h

@@ -78,6 +78,12 @@ void ausf_terminate(void);
 int pcf_initialize(void);
 void pcf_terminate(void);
 
+int nssf_initialize(void);
+void nssf_terminate(void);
+
+int bsf_initialize(void);
+void bsf_terminate(void);
+
 int upf_initialize(void);
 void upf_terminate(void);
 

lib/app/ogs-context.c

@@ -71,9 +71,12 @@ static void recalculate_pool_size(void)
 
 #define MAX_NUM_OF_TIMER        16
     self.pool.timer = self.max.ue * MAX_NUM_OF_TIMER;
+    self.pool.message = self.max.ue;
+    self.pool.event = self.max.ue;
+
+    self.pool.packet = self.max.ue * OGS_MAX_NUM_OF_PACKET_BUFFER;
 
     self.pool.nf = self.max.gnb;
-    self.pool.packet = self.max.ue * OGS_MAX_NUM_OF_PACKET_BUFFER;
 
 #define MAX_NUM_OF_SOCKET       4   /* Num of socket per NF */
     self.pool.socket = self.pool.nf * MAX_NUM_OF_SOCKET;
@@ -86,17 +89,17 @@ static void recalculate_pool_size(void)
     self.pool.pfcp_node = self.pool.nf;
 
 #define MAX_NUM_OF_NF_SERVICE   16  /* Num of NF Service per NF Instance */
-#define MAX_NUM_OF_SBI_MESSAGE  8   /* Num of HTTP(s) Request/Response per NF */
+#define MAX_NUM_OF_SBI_MESSAGE  4   /* Num of HTTP(s) Request/Response per NF */
 #define MAX_NUM_OF_NF_SUBSCRIPTION  4 /* Num of Subscription per NF */
     self.pool.nf_service = self.pool.nf * MAX_NUM_OF_NF_SERVICE;
-    self.pool.sbi_message = self.pool.nf * MAX_NUM_OF_SBI_MESSAGE;
     self.pool.nf_subscription = self.pool.nf * MAX_NUM_OF_NF_SUBSCRIPTION;
 
-#define MAX_EVENT_POOL          32
-    self.pool.event = MAX_EVENT_POOL;
-
 #define MAX_CSMAP_POOL          128
     self.pool.csmap = MAX_CSMAP_POOL;   /* Num of TAI-LAI Mapping Table */
+
+#define MAX_NUM_OF_IMPU         8
+    self.pool.impi = self.max.ue;
+    self.pool.impu = self.pool.impi * MAX_NUM_OF_IMPU;
 }
 
 static void regenerate_all_timer_duration(void)
@@ -173,6 +176,18 @@ static void app_context_prepare(void)
 #define USRSCTP_LOCAL_UDP_PORT      9899
     self.usrsctp.udp_port = USRSCTP_LOCAL_UDP_PORT;
 
+    self.sctp.heartbit_interval = 5000;     /* 5 seconds */
+    self.sctp.sack_delay = 200;             /* 200 ms */
+    self.sctp.rto_initial = 3000;           /* 3 seconds */
+    self.sctp.rto_min = 1000;               /* 1 seconds */
+    self.sctp.rto_max = 5000;               /* 5 seconds */
+    self.sctp.max_num_of_ostreams = OGS_DEFAULT_SCTP_MAX_NUM_OF_OSTREAMS;
+    self.sctp.max_num_of_istreams = 65535;
+    self.sctp.max_attempts = 4;
+    self.sctp.max_initial_timeout = 8000;   /* 8 seconds */
+
+    self.sockopt.no_delay = true;
+
 #define MAX_NUM_OF_UE               1024    /* Num of UE per AMF/MME */
 #define MAX_NUM_OF_GNB              32      /* Num of gNB per AMF/MME */
 
@@ -203,6 +218,14 @@ static void app_context_prepare(void)
      */
     self.time.message.duration = ogs_time_from_sec(10);
 
+    /*
+     * Handover Wait Duration : 300 ms (Default)
+     *
+     * Time to wait for AMF/MME to send UEContextReleaseCommand
+     * to the source gNB/eNB after receiving HandoverNotify
+     */
+    self.time.handover.duration = ogs_time_from_msec(300);
+
     regenerate_all_timer_duration();
 }
  
@@ -306,6 +329,12 @@ int ogs_app_context_parse_config(void)
                 } else if (!strcmp(parameter_key, "no_pcf")) {
                     self.parameter.no_pcf =
                         ogs_yaml_iter_bool(&parameter_iter);
+                } else if (!strcmp(parameter_key, "no_nssf")) {
+                    self.parameter.no_nssf =
+                        ogs_yaml_iter_bool(&parameter_iter);
+                } else if (!strcmp(parameter_key, "no_bsf")) {
+                    self.parameter.no_bsf =
+                        ogs_yaml_iter_bool(&parameter_iter);
                 } else if (!strcmp(parameter_key, "no_udr")) {
                     self.parameter.no_udr =
                         ogs_yaml_iter_bool(&parameter_iter);
@@ -321,9 +350,6 @@ int ogs_app_context_parse_config(void)
                 } else if (!strcmp(parameter_key, "multicast")) {
                     self.parameter.multicast =
                         ogs_yaml_iter_bool(&parameter_iter);
-                } else if (!strcmp(parameter_key, "no_slaac")) {
-                    self.parameter.no_slaac =
-                        ogs_yaml_iter_bool(&parameter_iter);
                 } else if (!strcmp(parameter_key, "use_openair")) {
                     self.parameter.use_openair =
                         ogs_yaml_iter_bool(&parameter_iter);
@@ -331,9 +357,28 @@ int ogs_app_context_parse_config(void)
                     parameter_key, "no_ipv4v6_local_addr_in_packet_filter")) {
                     self.parameter.no_ipv4v6_local_addr_in_packet_filter =
                         ogs_yaml_iter_bool(&parameter_iter);
+                } else if (!strcmp(parameter_key, "no_pfcp_rr_select")) {
+                    self.parameter.no_pfcp_rr_select =
+                        ogs_yaml_iter_bool(&parameter_iter);
                 } else
                     ogs_warn("unknown key `%s`", parameter_key);
             }
+        } else if (!strcmp(root_key, "sockopt")) {
+            ogs_yaml_iter_t sockopt_iter;
+            ogs_yaml_iter_recurse(&root_iter, &sockopt_iter);
+            while (ogs_yaml_iter_next(&sockopt_iter)) {
+                const char *sockopt_key = ogs_yaml_iter_key(&sockopt_iter);
+                ogs_assert(sockopt_key);
+                if (!strcmp(sockopt_key, "no_delay")) {
+                    self.sockopt.no_delay =
+                        ogs_yaml_iter_bool(&sockopt_iter);
+                } else if (!strcmp(sockopt_key, "linger")) {
+                    const char *v = ogs_yaml_iter_value(&sockopt_iter);
+                    if (v) self.sockopt.l_linger = atoi(v);
+                    self.sockopt.l_onoff = true;
+                } else
+                    ogs_warn("unknown key `%s`", sockopt_key);
+            }
         } else if (!strcmp(root_key, "sctp")) {
             ogs_yaml_iter_t sctp_iter;
             ogs_yaml_iter_recurse(&root_iter, &sctp_iter);
@@ -342,31 +387,34 @@ int ogs_app_context_parse_config(void)
                 ogs_assert(sctp_key);
                 if (!strcmp(sctp_key, "heartbit_interval")) {
                     const char *v = ogs_yaml_iter_value(&sctp_iter);
-                    if (v) self.sockopt.sctp.heartbit_interval = atoi(v);
+                    if (v) self.sctp.heartbit_interval = atoi(v);
+                } else if (!strcmp(sctp_key, "sack_delay")) {
+                    const char *v = ogs_yaml_iter_value(&sctp_iter);
+                    if (v) self.sctp.sack_delay = atoi(v);
                 } else if (!strcmp(sctp_key, "rto_initial")) {
                     const char *v = ogs_yaml_iter_value(&sctp_iter);
-                    if (v) self.sockopt.sctp.rto_initial = atoi(v);
+                    if (v) self.sctp.rto_initial = atoi(v);
                 } else if (!strcmp(sctp_key, "rto_min")) {
                     const char *v = ogs_yaml_iter_value(&sctp_iter);
-                    if (v) self.sockopt.sctp.rto_min = atoi(v);
+                    if (v) self.sctp.rto_min = atoi(v);
                 } else if (!strcmp(sctp_key, "rto_max")) {
                     const char *v = ogs_yaml_iter_value(&sctp_iter);
-                    if (v) self.sockopt.sctp.rto_max = atoi(v);
+                    if (v) self.sctp.rto_max = atoi(v);
                 } else if (!strcmp(sctp_key, "max_num_of_ostreams")) {
                     const char *v = ogs_yaml_iter_value(&sctp_iter);
                     if (v)
-                        self.sockopt.sctp.max_num_of_ostreams = atoi(v);
+                        self.sctp.max_num_of_ostreams = atoi(v);
                 } else if (!strcmp(sctp_key, "max_num_of_istreams")) {
                     const char *v = ogs_yaml_iter_value(&sctp_iter);
                     if (v)
-                        self.sockopt.sctp.max_num_of_istreams = atoi(v);
+                        self.sctp.max_num_of_istreams = atoi(v);
                 } else if (!strcmp(sctp_key, "max_attempts")) {
                     const char *v = ogs_yaml_iter_value(&sctp_iter);
-                    if (v) self.sockopt.sctp.max_attempts = atoi(v);
+                    if (v) self.sctp.max_attempts = atoi(v);
                 } else if (!strcmp(sctp_key, "max_initial_timeout")) {
                     const char *v = ogs_yaml_iter_value(&sctp_iter);
                     if (v)
-                        self.sockopt.sctp.max_initial_timeout = atoi(v);
+                        self.sctp.max_initial_timeout = atoi(v);
                 } else if (!strcmp(sctp_key, "usrsctp_udp_port")) {
                     const char *v = ogs_yaml_iter_value(&sctp_iter);
                     if (v) self.usrsctp.udp_port = atoi(v);
@@ -482,13 +530,31 @@ int ogs_app_context_parse_config(void)
                         if (!strcmp(msg_key, "duration")) {
                             const char *v = ogs_yaml_iter_value(&msg_iter);
                             if (v) {
-                                self.time.message.duration = 
+                                self.time.message.duration =
                                     ogs_time_from_msec(atoll(v));
                                 regenerate_all_timer_duration();
                             }
                         } else
                             ogs_warn("unknown key `%s`", msg_key);
                     }
+                } else if (!strcmp(time_key, "handover")) {
+                    ogs_yaml_iter_t msg_iter;
+                    ogs_yaml_iter_recurse(&time_iter, &msg_iter);
+
+                    while (ogs_yaml_iter_next(&msg_iter)) {
+                        const char *msg_key =
+                            ogs_yaml_iter_key(&msg_iter);
+                        ogs_assert(msg_key);
+
+                        if (!strcmp(msg_key, "duration")) {
+                            const char *v = ogs_yaml_iter_value(&msg_iter);
+                            if (v) {
+                                self.time.handover.duration =
+                                    ogs_time_from_msec(atoll(v));
+                            }
+                        } else
+                            ogs_warn("unknown key `%s`", msg_key);
+                    }
                 } else
                     ogs_warn("unknown key `%s`", time_key);
             }

lib/app/ogs-context.h

@@ -63,6 +63,8 @@ typedef struct ogs_app_context_s {
         int no_ausf;
         int no_udm;
         int no_pcf;
+        int no_nssf;
+        int no_bsf;
         int no_udr;
         int no_nrf;
 
@@ -71,13 +73,31 @@ typedef struct ogs_app_context_s {
         int no_ipv6;
         int prefer_ipv4;
         int multicast;
-        int no_slaac;
 
         int use_openair;
         int no_ipv4v6_local_addr_in_packet_filter;
+
+        int no_pfcp_rr_select;
     } parameter;
 
-    ogs_sockopt_t sockopt;
+    struct {
+        int no_delay;
+        int l_onoff;
+        int l_linger;
+    } sockopt;
+
+    struct {
+        int heartbit_interval;
+        int sack_delay;
+        int rto_initial;
+        int rto_min;
+        int rto_max;
+        int max_num_of_ostreams;
+        int max_num_of_istreams;
+        int max_attempts;
+        int max_initial_timeout;
+    } sctp;
+
     struct {
         int udp_port;
     } usrsctp;
@@ -98,17 +118,21 @@ typedef struct ogs_app_context_s {
         uint64_t tunnel;
         uint64_t nf_service;
         uint64_t nf_subscription;
-        uint64_t sbi_message;
 
         uint64_t csmap;
 
+        uint64_t message;
         uint64_t event;
         uint64_t timer;
+
         uint64_t socket;
         uint64_t gtp_xact;
         uint64_t gtp_node;
         uint64_t pfcp_xact;
         uint64_t pfcp_node;
+
+        uint64_t impi;
+        uint64_t impu;
     } pool;
 
     struct {
@@ -146,6 +170,12 @@ typedef struct ogs_app_context_s {
                 ogs_time_t no_heartbeat_duration;
             } pfcp;
         } message;
+
+        struct {
+            ogs_time_t duration;
+            ogs_time_t complete_delay;
+        } handover;
+
     } time;
 } ogs_app_context_t;
 

lib/asn1c/common/ANY.c

@@ -4,447 +4,72 @@
  */
 #include <asn_internal.h>
 #include <ANY.h>
-#include <errno.h>
 
 asn_OCTET_STRING_specifics_t asn_SPC_ANY_specs = {
-	sizeof(ANY_t),
-	offsetof(ANY_t, _asn_ctx),
-	ASN_OSUBV_ANY
+    sizeof(ANY_t),
+    offsetof(ANY_t, _asn_ctx),
+    ASN_OSUBV_ANY
 };
 asn_TYPE_operation_t asn_OP_ANY = {
-	OCTET_STRING_free,
-	OCTET_STRING_print,
-	OCTET_STRING_compare,
-	OCTET_STRING_decode_ber,
-	OCTET_STRING_encode_der,
-	OCTET_STRING_decode_xer_hex,
-	ANY_encode_xer,
-#ifdef	ASN_DISABLE_OER_SUPPORT
-	0,
-	0,
+    OCTET_STRING_free,
+#if !defined(ASN_DISABLE_PRINT_SUPPORT)
+    OCTET_STRING_print,
 #else
-	0,
-	0,
-#endif  /* ASN_DISABLE_OER_SUPPORT */
-#ifdef	ASN_DISABLE_PER_SUPPORT
-	0, 0, 0, 0,
+    0,
+#endif  /* !defined(ASN_DISABLE_PRINT_SUPPORT) */
+    OCTET_STRING_compare,
+#if !defined(ASN_DISABLE_BER_SUPPORT)
+    OCTET_STRING_decode_ber,
+    OCTET_STRING_encode_der,
 #else
-	ANY_decode_uper,
-	ANY_encode_uper,
-	ANY_decode_aper,
-	ANY_encode_aper,
-#endif  /* ASN_DISABLE_PER_SUPPORT */
-	0,	/* Random fill is not defined for ANY type */
-	0	/* Use generic outmost tag fetcher */
+    0,
+    0,
+#endif  /* !defined(ASN_DISABLE_BER_SUPPORT) */
+#if !defined(ASN_DISABLE_XER_SUPPORT)
+    OCTET_STRING_decode_xer_hex,
+    ANY_encode_xer,
+#else
+    0,
+    0,
+#endif  /* !defined(ASN_DISABLE_XER_SUPPORT) */
+#if !defined(ASN_DISABLE_OER_SUPPORT)
+    0,
+    0,
+#else
+    0,
+    0,
+#endif  /* !defined(ASN_DISABLE_OER_SUPPORT) */
+#if !defined(ASN_DISABLE_UPER_SUPPORT)
+    ANY_decode_uper,
+    ANY_encode_uper,
+#else
+    0,
+    0,
+#endif  /* !defined(ASN_DISABLE_UPER_SUPPORT) */
+#if !defined(ASN_DISABLE_APER_SUPPORT)
+    ANY_decode_aper,
+    ANY_encode_aper,
+#else
+    0,
+    0,
+#endif  /* !defined(ASN_DISABLE_APER_SUPPORT) */
+    0,  /* Random fill is not defined for ANY type */
+    0  /* Use generic outmost tag fetcher */
 };
 asn_TYPE_descriptor_t asn_DEF_ANY = {
-	"ANY",
-	"ANY",
-	&asn_OP_ANY,
-	0, 0, 0, 0,
-	{ 0, 0, asn_generic_no_constraint },	/* No constraints */
-	0, 0,	/* No members */
-	&asn_SPC_ANY_specs,
+    "ANY",
+    "ANY",
+    &asn_OP_ANY,
+    0, 0, 0, 0,
+    {
+#if !defined(ASN_DISABLE_OER_SUPPORT)
+        0,
+#endif  /* !defined(ASN_DISABLE_OER_SUPPORT) */
+#if !defined(ASN_DISABLE_UPER_SUPPORT) || !defined(ASN_DISABLE_APER_SUPPORT)
+        0,
+#endif  /* !defined(ASN_DISABLE_UPER_SUPPORT) || !defined(ASN_DISABLE_APER_SUPPORT) */
+        asn_generic_no_constraint
+    },  /* No constraints */
+    0, 0,  /* No members */
+    &asn_SPC_ANY_specs,
 };
-
-#undef RETURN
-#define RETURN(_code)                       \
-    do {                                    \
-        asn_dec_rval_t tmprval;             \
-        tmprval.code = _code;               \
-        tmprval.consumed = consumed_myself; \
-        return tmprval;                     \
-    } while(0)
-
-asn_enc_rval_t
-ANY_encode_xer(const asn_TYPE_descriptor_t *td, const void *sptr, int ilevel,
-               enum xer_encoder_flags_e flags, asn_app_consume_bytes_f *cb,
-               void *app_key) {
-    if(flags & XER_F_CANONICAL) {
-		/*
-		 * Canonical XER-encoding of ANY type is not supported.
-		 */
-		ASN__ENCODE_FAILED;
-	}
-
-	/* Dump as binary */
-	return OCTET_STRING_encode_xer(td, sptr, ilevel, flags, cb, app_key);
-}
-
-struct _callback_arg {
-	uint8_t *buffer;
-	size_t offset;
-	size_t size;
-};
-
-static int ANY__consume_bytes(const void *buffer, size_t size, void *key);
-
-int
-ANY_fromType(ANY_t *st, asn_TYPE_descriptor_t *td, void *sptr) {
-	struct _callback_arg arg;
-	asn_enc_rval_t erval = {0,0,0};
-
-	if(!st || !td) {
-		errno = EINVAL;
-		return -1;
-	}
-
-	if(!sptr) {
-		if(st->buf) FREEMEM(st->buf);
-		st->size = 0;
-		return 0;
-	}
-
-	arg.offset = arg.size = 0;
-	arg.buffer = 0;
-
-	erval = der_encode(td, sptr, ANY__consume_bytes, &arg);
-	if(erval.encoded == -1) {
-		if(arg.buffer) FREEMEM(arg.buffer);
-		return -1;
-	}
-	assert((size_t)erval.encoded == arg.offset);
-
-	if(st->buf) FREEMEM(st->buf);
-	st->buf = arg.buffer;
-	st->size = arg.offset;
-
-	return 0;
-}
-
-int
-ANY_fromType_aper(ANY_t *st, asn_TYPE_descriptor_t *td, void *sptr) {
-	uint8_t *buffer = NULL;
-	ssize_t erval;
-
-	if(!st || !td) {
-		errno = EINVAL;
-		return -1;
-	}
-
-	if(!sptr) {
-		if(st->buf) FREEMEM(st->buf);
-		st->size = 0;
-		return 0;
-	}
-
-	erval = aper_encode_to_new_buffer(td, td->encoding_constraints.per_constraints, sptr, (void**)&buffer);
-
-	if(erval == -1) {
-		if(buffer) FREEMEM(buffer);
-		return -1;
-	}
-	assert((size_t)erval > 0);
-
-	if(st->buf) FREEMEM(st->buf);
-	st->buf = buffer;
-	st->size = erval;
-
-	return 0;
-}
-
-ANY_t *
-ANY_new_fromType(asn_TYPE_descriptor_t *td, void *sptr) {
-	ANY_t tmp;
-	ANY_t *st;
-
-	if(!td || !sptr) {
-		errno = EINVAL;
-		return 0;
-	}
-
-	memset(&tmp, 0, sizeof(tmp));
-
-	if(ANY_fromType(&tmp, td, sptr)) return 0;
-
-	st = (ANY_t *)CALLOC(1, sizeof(ANY_t));
-	if(st) {
-		*st = tmp;
-		return st;
-	} else {
-		FREEMEM(tmp.buf);
-		return 0;
-	}
-}
-
-ANY_t *
-ANY_new_fromType_aper(asn_TYPE_descriptor_t *td, void *sptr) {
-	ANY_t tmp;
-	ANY_t *st;
-
-	if(!td || !sptr) {
-		errno = EINVAL;
-		return 0;
-	}
-
-	memset(&tmp, 0, sizeof(tmp));
-
-	if(ANY_fromType_aper(&tmp, td, sptr)) return 0;
-
-	st = (ANY_t *)CALLOC(1, sizeof(ANY_t));
-	if(st) {
-		*st = tmp;
-		return st;
-	} else {
-		FREEMEM(tmp.buf);
-		return 0;
-	}
-}
-
-int
-ANY_to_type(ANY_t *st, asn_TYPE_descriptor_t *td, void **struct_ptr) {
-	asn_dec_rval_t rval;
-	void *newst = 0;
-
-	if(!st || !td || !struct_ptr) {
-		errno = EINVAL;
-		return -1;
-	}
-
-	if(st->buf == 0) {
-		/* Nothing to convert, make it empty. */
-		*struct_ptr = (void *)0;
-		return 0;
-	}
-
-	rval = ber_decode(0, td, (void **)&newst, st->buf, st->size);
-	if(rval.code == RC_OK) {
-		*struct_ptr = newst;
-		return 0;
-	} else {
-		/* Remove possibly partially decoded data. */
-		ASN_STRUCT_FREE(*td, newst);
-		return -1;
-	}
-}
-
-int
-ANY_to_type_aper(ANY_t *st, asn_TYPE_descriptor_t *td, void **struct_ptr) {
-	asn_dec_rval_t rval;
-	void *newst = 0;
-
-	if(!st || !td || !struct_ptr) {
-		errno = EINVAL;
-		return -1;
-	}
-
-	if(st->buf == 0) {
-		/* Nothing to convert, make it empty. */
-		*struct_ptr = (void *)0;
-		return 0;
-	}
-
-	rval = aper_decode(0, td, (void **)&newst, st->buf, st->size, 0, 0);
-	if(rval.code == RC_OK) {
-		*struct_ptr = newst;
-		return 0;
-	} else {
-		/* Remove possibly partially decoded data. */
-		ASN_STRUCT_FREE(*td, newst);
-		return -1;
-	}
-}
-
-static int ANY__consume_bytes(const void *buffer, size_t size, void *key) {
-	struct _callback_arg *arg = (struct _callback_arg *)key;
-
-	if((arg->offset + size) >= arg->size) {
-		size_t nsize = (arg->size ? arg->size << 2 : 16) + size;
-		void *p = REALLOC(arg->buffer, nsize);
-		if(!p) return -1;
-		arg->buffer = (uint8_t *)p;
-		arg->size = nsize;
-	}
-
-	memcpy(arg->buffer + arg->offset, buffer, size);
-	arg->offset += size;
-	assert(arg->offset < arg->size);
-
-	return 0;
-}
-
-#ifndef ASN_DISABLE_PER_SUPPORT
-
-asn_dec_rval_t
-ANY_decode_uper(const asn_codec_ctx_t *opt_codec_ctx,
-                const asn_TYPE_descriptor_t *td,
-                const asn_per_constraints_t *constraints, void **sptr,
-                asn_per_data_t *pd) {
-    const asn_OCTET_STRING_specifics_t *specs =
-        td->specifics ? (const asn_OCTET_STRING_specifics_t *)td->specifics
-                      : &asn_SPC_ANY_specs;
-    size_t consumed_myself = 0;
-    int repeat;
-    ANY_t *st = (ANY_t *)*sptr;
-
-    (void)opt_codec_ctx;
-    (void)constraints;
-
-    /*
-     * Allocate the structure.
-     */
-    if(!st) {
-        st = (ANY_t *)(*sptr = CALLOC(1, specs->struct_size));
-        if(!st) RETURN(RC_FAIL);
-    }
-
-    ASN_DEBUG("UPER Decoding ANY type");
-
-    st->size = 0;
-    do {
-        ssize_t raw_len;
-        ssize_t len_bytes;
-        ssize_t len_bits;
-        void *p;
-        int ret;
-
-        /* Get the PER length */
-        raw_len = uper_get_length(pd, -1, 0, &repeat);
-        if(raw_len < 0) RETURN(RC_WMORE);
-        if(raw_len == 0 && st->buf) break;
-
-        ASN_DEBUG("Got PER length len %" ASN_PRI_SIZE ", %s (%s)", raw_len,
-                  repeat ? "repeat" : "once", td->name);
-        len_bytes = raw_len;
-        len_bits = len_bytes * 8;
-
-        p = REALLOC(st->buf, st->size + len_bytes + 1);
-        if(!p) RETURN(RC_FAIL);
-        st->buf = (uint8_t *)p;
-
-        ret = per_get_many_bits(pd, &st->buf[st->size], 0, len_bits);
-        if(ret < 0) RETURN(RC_WMORE);
-        consumed_myself += len_bits;
-        st->size += len_bytes;
-    } while(repeat);
-    st->buf[st->size] = 0; /* nul-terminate */
-
-    RETURN(RC_OK);
-}
-
-asn_enc_rval_t
-ANY_encode_uper(const asn_TYPE_descriptor_t *td,
-                const asn_per_constraints_t *constraints, const void *sptr,
-                asn_per_outp_t *po) {
-    const ANY_t *st = (const ANY_t *)sptr;
-    asn_enc_rval_t er = {0, 0, 0};
-    const uint8_t *buf;
-    size_t size;
-    int ret;
-
-    (void)constraints;
-
-    if(!st || (!st->buf && st->size)) ASN__ENCODE_FAILED;
-
-    buf = st->buf;
-    size = st->size;
-    do {
-        int need_eom = 0;
-        ssize_t may_save = uper_put_length(po, size, &need_eom);
-        if(may_save < 0) ASN__ENCODE_FAILED;
-
-        ret = per_put_many_bits(po, buf, may_save * 8);
-        if(ret) ASN__ENCODE_FAILED;
-
-        buf += may_save;
-        size -= may_save;
-        assert(!(may_save & 0x07) || !size);
-        if(need_eom && uper_put_length(po, 0, 0))
-            ASN__ENCODE_FAILED; /* End of Message length */
-    } while(size);
-
-    ASN__ENCODED_OK(er);
-}
-
-asn_dec_rval_t
-ANY_decode_aper(const asn_codec_ctx_t *opt_codec_ctx,
-                const asn_TYPE_descriptor_t *td,
-                const asn_per_constraints_t *constraints, void **sptr,
-                asn_per_data_t *pd) {
-    const asn_OCTET_STRING_specifics_t *specs =
-        td->specifics ? (const asn_OCTET_STRING_specifics_t *)td->specifics
-                      : &asn_SPC_ANY_specs;
-    size_t consumed_myself = 0;
-    int repeat;
-    ANY_t *st = (ANY_t *)*sptr;
-
-    (void)opt_codec_ctx;
-    (void)constraints;
-
-    /*
-     * Allocate the structure.
-     */
-    if(!st) {
-        st = (ANY_t *)(*sptr = CALLOC(1, specs->struct_size));
-        if(!st) RETURN(RC_FAIL);
-    }
-
-    ASN_DEBUG("APER Decoding ANY type");
-
-    st->size = 0;
-    do {
-        ssize_t raw_len;
-        ssize_t len_bytes;
-        ssize_t len_bits;
-        void *p;
-        int ret;
-
-        /* Get the PER length */
-        raw_len = aper_get_length(pd, -1, 0, &repeat);
-        if(raw_len < 0) RETURN(RC_WMORE);
-        if(raw_len == 0 && st->buf) break;
-
-        ASN_DEBUG("Got PER length len %" ASN_PRI_SIZE ", %s (%s)", raw_len,
-                  repeat ? "repeat" : "once", td->name);
-        len_bytes = raw_len;
-        len_bits = len_bytes * 8;
-
-        p = REALLOC(st->buf, st->size + len_bytes + 1);
-        if(!p) RETURN(RC_FAIL);
-        st->buf = (uint8_t *)p;
-
-        ret = per_get_many_bits(pd, &st->buf[st->size], 0, len_bits);
-        if(ret < 0) RETURN(RC_WMORE);
-        consumed_myself += len_bits;
-        st->size += len_bytes;
-    } while(repeat);
-    st->buf[st->size] = 0; /* nul-terminate */
-
-    RETURN(RC_OK);
-}
-
-asn_enc_rval_t
-ANY_encode_aper(const asn_TYPE_descriptor_t *td,
-                const asn_per_constraints_t *constraints, const void *sptr,
-                asn_per_outp_t *po) {
-    const ANY_t *st = (const ANY_t *)sptr;
-    asn_enc_rval_t er = {0, 0, 0};
-    const uint8_t *buf;
-    size_t size;
-    int ret;
-
-    (void)constraints;
-
-    if(!st || (!st->buf && st->size)) ASN__ENCODE_FAILED;
-
-    buf = st->buf;
-    size = st->size;
-    do {
-        int need_eom = 0;
-        ssize_t may_save = uper_put_length(po, size, &need_eom);
-        if(may_save < 0) ASN__ENCODE_FAILED;
-
-        ret = per_put_many_bits(po, buf, may_save * 8);
-        if(ret) ASN__ENCODE_FAILED;
-
-        buf += may_save;
-        size -= may_save;
-        assert(!(may_save & 0x07) || !size);
-        if(need_eom && uper_put_length(po, 0, 0))
-            ASN__ENCODE_FAILED; /* End of Message length */
-    } while(size);
-
-    ASN__ENCODED_OK(er);
-}
-#endif /* ASN_DISABLE_PER_SUPPORT */
-

lib/asn1c/common/ANY.h

@@ -22,23 +22,34 @@ extern asn_TYPE_descriptor_t asn_DEF_ANY;
 extern asn_TYPE_operation_t asn_OP_ANY;
 extern asn_OCTET_STRING_specifics_t asn_SPC_ANY_specs;
 
-asn_struct_free_f ANY_free;
-asn_struct_print_f ANY_print;
-ber_type_decoder_f ANY_decode_ber;
-der_type_encoder_f ANY_encode_der;
+#define ANY_free OCTET_STRING_free
+
+#if !defined(ASN_DISABLE_PRINT_SUPPORT)
+#define ANY_print OCTET_STRING_print
+#endif  /* !defined(ASN_DISABLE_PRINT_SUPPORT) */
+
+#define ANY_compare OCTET_STRING_compare
+
+#define ANY_constraint asn_generic_no_constraint
+
+#if !defined(ASN_DISABLE_BER_SUPPORT)
+#define ANY_decode_ber OCTET_STRING_decode_ber
+#define ANY_encode_der OCTET_STRING_encode_der
+#endif  /* !defined(ASN_DISABLE_BER_SUPPORT) */
+
+#if !defined(ASN_DISABLE_XER_SUPPORT)
+#define ANY_decode_xer OCTET_STRING_decode_xer_hex
 xer_type_encoder_f ANY_encode_xer;
+#endif  /* !defined(ASN_DISABLE_XER_SUPPORT) */
+
+#if !defined(ASN_DISABLE_UPER_SUPPORT)
 per_type_decoder_f ANY_decode_uper;
 per_type_encoder_f ANY_encode_uper;
+#endif  /* !defined(ASN_DISABLE_UPER_SUPPORT) */
+#if !defined(ASN_DISABLE_APER_SUPPORT)
 per_type_decoder_f ANY_decode_aper;
 per_type_encoder_f ANY_encode_aper;
-
-#define ANY_free         OCTET_STRING_free
-#define ANY_print        OCTET_STRING_print
-#define ANY_compare      OCTET_STRING_compare
-#define ANY_constraint   asn_generic_no_constraint
-#define ANY_decode_ber   OCTET_STRING_decode_ber
-#define ANY_encode_der   OCTET_STRING_encode_der
-#define ANY_decode_xer   OCTET_STRING_decode_xer_hex
+#endif  /* !defined(ASN_DISABLE_APER_SUPPORT) */
 
 /******************************
  * Handy conversion routines. *
@@ -46,13 +57,17 @@ per_type_encoder_f ANY_encode_aper;
 
 /* Convert another ASN.1 type into the ANY. This implies DER encoding. */
 int ANY_fromType(ANY_t *, asn_TYPE_descriptor_t *td, void *struct_ptr);
-int ANY_fromType_aper(ANY_t *st, asn_TYPE_descriptor_t *td, void *sptr);
 ANY_t *ANY_new_fromType(asn_TYPE_descriptor_t *td, void *struct_ptr);
+#if !defined(ASN_DISABLE_APER_SUPPORT)
+int ANY_fromType_aper(ANY_t *st, asn_TYPE_descriptor_t *td, void *sptr);
 ANY_t *ANY_new_fromType_aper(asn_TYPE_descriptor_t *td, void *sptr);
+#endif  /* !defined(ASN_DISABLE_APER_SUPPORT) */
 
 /* Convert the contents of the ANY type into the specified type. */
 int ANY_to_type(ANY_t *, asn_TYPE_descriptor_t *td, void **struct_ptr);
+#if !defined(ASN_DISABLE_APER_SUPPORT)
 int ANY_to_type_aper(ANY_t *, asn_TYPE_descriptor_t *td, void **struct_ptr);
+#endif  /* !defined(ASN_DISABLE_APER_SUPPORT) */
 
 #define	ANY_fromBuf(s, buf, size)	OCTET_STRING_fromBuf((s), (buf), (size))
 #define	ANY_new_fromBuf(buf, size)	OCTET_STRING_new_fromBuf(	\

lib/asn1c/common/ANY_aper.c

@@ -0,0 +1,190 @@
+/*
+ * Copyright (c) 2017 Lev Walkin <vlm@lionet.info>.
+ * All rights reserved.
+ * Redistribution and modifications are permitted subject to BSD license.
+ */
+#include <asn_internal.h>
+#include <ANY.h>
+#include <errno.h>
+
+#undef RETURN
+#define RETURN(_code)                       \
+    do {                                    \
+        asn_dec_rval_t tmprval;             \
+        tmprval.code = _code;               \
+        tmprval.consumed = consumed_myself; \
+        return tmprval;                     \
+    } while(0)
+
+int
+ANY_fromType_aper(ANY_t *st, asn_TYPE_descriptor_t *td, void *sptr) {
+    uint8_t *buffer = NULL;
+    ssize_t erval;
+
+    if(!st || !td) {
+        errno = EINVAL;
+        return -1;
+    }
+
+    if(!sptr) {
+        if(st->buf) FREEMEM(st->buf);
+        st->size = 0;
+        return 0;
+    }
+
+    erval = aper_encode_to_new_buffer(td, td->encoding_constraints.per_constraints, sptr, (void**)&buffer);
+
+    if(erval == -1) {
+        if(buffer) FREEMEM(buffer);
+        return -1;
+    }
+    assert((size_t)erval > 0);
+
+    if(st->buf) FREEMEM(st->buf);
+    st->buf = buffer;
+    st->size = erval;
+
+    return 0;
+}
+
+ANY_t *
+ANY_new_fromType_aper(asn_TYPE_descriptor_t *td, void *sptr) {
+    ANY_t tmp;
+    ANY_t *st;
+
+    if(!td || !sptr) {
+        errno = EINVAL;
+        return 0;
+    }
+
+    memset(&tmp, 0, sizeof(tmp));
+
+    if(ANY_fromType_aper(&tmp, td, sptr)) return 0;
+
+    st = (ANY_t *)CALLOC(1, sizeof(ANY_t));
+    if(st) {
+        *st = tmp;
+        return st;
+    } else {
+        FREEMEM(tmp.buf);
+        return 0;
+    }
+}
+
+int
+ANY_to_type_aper(ANY_t *st, asn_TYPE_descriptor_t *td, void **struct_ptr) {
+    asn_dec_rval_t rval;
+    void *newst = 0;
+
+    if(!st || !td || !struct_ptr) {
+        errno = EINVAL;
+        return -1;
+    }
+
+    if(st->buf == 0) {
+        /* Nothing to convert, make it empty. */
+        *struct_ptr = (void *)0;
+        return 0;
+    }
+
+    rval = aper_decode(0, td, (void **)&newst, st->buf, st->size, 0, 0);
+    if(rval.code == RC_OK) {
+        *struct_ptr = newst;
+        return 0;
+    } else {
+        /* Remove possibly partially decoded data. */
+        ASN_STRUCT_FREE(*td, newst);
+        return -1;
+    }
+}
+
+asn_dec_rval_t
+ANY_decode_aper(const asn_codec_ctx_t *opt_codec_ctx,
+                const asn_TYPE_descriptor_t *td,
+                const asn_per_constraints_t *constraints, void **sptr,
+                asn_per_data_t *pd) {
+    const asn_OCTET_STRING_specifics_t *specs =
+        td->specifics ? (const asn_OCTET_STRING_specifics_t *)td->specifics
+                      : &asn_SPC_ANY_specs;
+    size_t consumed_myself = 0;
+    int repeat;
+    ANY_t *st = (ANY_t *)*sptr;
+
+    (void)opt_codec_ctx;
+    (void)constraints;
+
+    /*
+     * Allocate the structure.
+     */
+    if(!st) {
+        st = (ANY_t *)(*sptr = CALLOC(1, specs->struct_size));
+        if(!st) RETURN(RC_FAIL);
+    }
+
+    ASN_DEBUG("APER Decoding ANY type");
+
+    st->size = 0;
+    do {
+        ssize_t raw_len;
+        ssize_t len_bytes;
+        ssize_t len_bits;
+        void *p;
+        int ret;
+
+        /* Get the PER length */
+        raw_len = aper_get_length(pd, -1, 0, &repeat);
+        if(raw_len < 0) RETURN(RC_WMORE);
+        if(raw_len == 0 && st->buf) break;
+
+        ASN_DEBUG("Got PER length len %" ASN_PRI_SIZE ", %s (%s)", raw_len,
+                  repeat ? "repeat" : "once", td->name);
+        len_bytes = raw_len;
+        len_bits = len_bytes * 8;
+
+        p = REALLOC(st->buf, st->size + len_bytes + 1);
+        if(!p) RETURN(RC_FAIL);
+        st->buf = (uint8_t *)p;
+
+        ret = per_get_many_bits(pd, &st->buf[st->size], 0, len_bits);
+        if(ret < 0) RETURN(RC_WMORE);
+        consumed_myself += len_bits;
+        st->size += len_bytes;
+    } while(repeat);
+    st->buf[st->size] = 0; /* nul-terminate */
+
+    RETURN(RC_OK);
+}
+
+asn_enc_rval_t
+ANY_encode_aper(const asn_TYPE_descriptor_t *td,
+                const asn_per_constraints_t *constraints, const void *sptr,
+                asn_per_outp_t *po) {
+    const ANY_t *st = (const ANY_t *)sptr;
+    asn_enc_rval_t er = {0, 0, 0};
+    const uint8_t *buf;
+    size_t size;
+    int ret;
+
+    (void)constraints;
+
+    if(!st || (!st->buf && st->size)) ASN__ENCODE_FAILED;
+
+    buf = st->buf;
+    size = st->size;
+    do {
+        int need_eom = 0;
+        ssize_t may_save = aper_put_length(po, -1, size, &need_eom);
+        if(may_save < 0) ASN__ENCODE_FAILED;
+
+        ret = per_put_many_bits(po, buf, may_save * 8);
+        if(ret) ASN__ENCODE_FAILED;
+
+        buf += may_save;
+        size -= may_save;
+        assert(!(may_save & 0x07) || !size);
+        if(need_eom && aper_put_length(po, -1, 0, 0))
+            ASN__ENCODE_FAILED; /* End of Message length */
+    } while(size);
+
+    ASN__ENCODED_OK(er);
+}