mirror of
https://gitea.osmocom.org/cellular-infrastructure/osmo-mgw.git
synced 2025-10-23 08:12:01 +00:00
5e101c9fed
Do not refuse IuUP Initialization messages coming in on an RTP port if the remote IP address is not yet known. If an IUFP conn is not yet configured (pre-Initialization), allow rx from any remote address if the remote IP address is not yet known. If we refuse the IuUP Initialization, a 3G RNC may fail to set up a RAB. We will know the remote address only *after* assigning a RAB succeeded. So the IuUP Initialization must be allowed before knowing all addresses. At the time of writing, CRCX for IUFP are sent to osmo-mgw in either LOOPBACK or in RECVONLY mode: - current osmo-msc: recvonly - osmo-msc <= v1.10.0: loopback - osmo-hnbgw: loopback IuUP Initialization should work regardless of that. See also next patch I158dd046fdfcb10392cde3de8cc88dd095a05b40 IuUP is one layer below the loopback/send/recv decision for RTP; IuUP is always terminated at the MGW, while the AMR payload carries through. Related: alternative patch Idd833997abce46886e9664505b2776fa5dadc8db Related: SYS#6657 Change-Id: I6c365559a7bd197349f0ea99f7a13b56a4bb580b
About OsmoMGW ============= OsmoMGW originated from the OpenBSC project, which started as a minimalistic all-in-one implementation of the GSM Network. In 2017, OpenBSC had reached maturity and diversity (including M3UA SIGTRAN and 3G support in the form of IuCS and IuPS interfaces) that naturally lead to a separation of the all-in-one approach to fully independent separate programs as in typical GSM networks. OsmoMGW was one of the parts split off from the old openbsc.git. It originated as a solution to merely navigate RTP streams through a NAT, but has since matured to a Media Gateway implementation that is capable of streaming RTP for 2G (AoIP) and 3G (IuCS) GSM networks as well as (still not implemented at time of writing) transcoding between TRAU, various RTP payloads and IuUP. The OsmoMGW program exposes an MGCP interface towards clients like OsmoMSC and OsmoBSC, and receives and sends RTP streams as configured via MGCP. The libosmo-mgcp-client library exposes utilities used by e.g. OsmoMSC (found in osmo-msc.git) to instruct OsmoMGW via its MGCP service. Find OsmoMGW issue tracker and wiki online at https://osmocom.org/projects/osmo-mgw https://osmocom.org/projects/osmo-mgw/wiki