fpga: WIP refactoring

2025-11-03 21:43:15 +00:00 · 2017-08-04 16:01:59 +03:00
11 changed files with 1123 additions and 57 deletions
--- a/fpga/control_lib/s6_icap_wb.v
+++ b/fpga/control_lib/s6_icap_wb.v
@@ -21,50 +21,52 @@
 module s6_icap_wb
  (input clk, input clk_icap, input reset,
   input cyc_i, input stb_i, input we_i, output reg ack_o,
-   input [31:0] dat_i, output reg[31:0] dat_o);//, output [31:0] debug_out);
+   input [31:0] dat_i, output [31:0] dat_o);//, output [31:0] debug_out);

-    reg slow_clk_icap;
-    always @(posedge clk_icap) slow_clk_icap <= ~slow_clk_icap;
+//    reg slow_clk_icap;
+//    always @(posedge clk_icap) slow_clk_icap <= ~slow_clk_icap;
 	
 	wire 	BUSY, CE, WRITE;
-	wire[31:0] s1_dat_i;
-	reg[31:0] s_dat_o;
-	wire[31:0] s1_dat_o;
+	wire[15:0] s1_dat_i;
+//	reg[31:0] s_dat_o;
+//	wire[31:0] s1_dat_o;
 	
-   assign s1_dat_o[31:16] = 16'd0;
-  
+//   assign s1_dat_o[31:16] = 16'd0;
+assign dat_o = 0;
+
+
   wire  full, empty;

-   fifo_xlnx_16x40_2clk icap_fifo
+   fifo_xlnx_32x36_2clk icap_fifo
     (.rst(reset),
-      .wr_clk(clk), .din(dat_i), .wr_en(we_i & stb_i & ~ack_o & ~full), .full(full),
-      .rd_clk(slow_clk_icap), .dout(s1_dat_i), .rd_en(~empty), .empty(empty));
+      .wr_clk(clk), .din(dat_i[15:0]), .wr_en(we_i & cyc_i & stb_i & ~ack_o & ~full), .full(full),
+      .rd_clk(clk_icap), .dout(s1_dat_i), .rd_en(~empty), .empty(empty));

-   assign WRITE 	 = empty;
+//   assign WRITE 	 = empty;
   assign CE 		 = empty;
   
   ICAP_SPARTAN6 ICAP_SPARTAN6_inst
-     (.BUSY(BUSY),          // Busy output
-      .O(s1_dat_o[15:0]),            // 16-bit data output
-      .CE(CE),              // Clock enable input
-      .CLK(slow_clk_icap),            // Clock input
-      .I(s1_dat_i[15:0]),            // 16-bit data input
-      .WRITE(WRITE)         // Write input
+     (.BUSY(),         // Busy output, active high
+      .O(),            // 16-bit data output
+      .CE(CE),         // Clock enable input, active low
+      .CLK(clk_icap),  // Clock input
+      .I(s1_dat_i),    // 16-bit data input
+      .WRITE(1'b0)     // Write input, 0 - WRITE, 1 - READ
      );

 //cross back to Wishbone clock domain
 	always @(posedge clk)
 	if (reset)
   	begin
-			s_dat_o <= 32'd0;
-		   dat_o <= 32'd0;
-			ack_o <= 1'b0;
+		//s_dat_o <= 32'd0;
+		//dat_o <= 32'd0;
+		ack_o <= 1'b0;
 		end
 	else 
 		begin
-		   s_dat_o <= s1_dat_o;
-		   dat_o[15:0] <= s_dat_o[15:0];
-         ack_o <= stb_i & ~ack_o;
+		// s_dat_o <= s1_dat_o;
+		// dat_o[15:0] <= s_dat_o[15:0];
+		ack_o <= cyc_i & stb_i & ~ack_o;
 		end
 		
 endmodule // s6_icap_wb
--- a/fpga/coregen/pll_rx.v
+++ b/fpga/coregen/pll_rx.v
@@ -58,6 +58,7 @@
 // CLK_OUT1   125.000      0.000      50.0      200.000     50.000
 // CLK_OUT2   125.000    180.000      50.0      300.000     50.000
 // CLK_OUT3   125.000      0.000      50.0      200.000     50.000
+// CLK_OUT4    62.500      0.000      50.0      200.000     50.000
 //
 //----------------------------------------------------------------------------
 // Input Clock   Input Freq (MHz)   Input Jitter (UI)
@@ -73,7 +74,8 @@ module pll_rx
  // Clock out ports
  output        clk_rx,
  output        clk_rx_180,
-  output        clk_to_mac
+  output        clk_to_mac,
+  output        clk_rx_div2
 );

  // Input buffering
@@ -95,6 +97,7 @@ module pll_rx
  wire clkfb;
  wire clk0;
  wire clk180;
+  wire clkdv;

  DCM_SP
  #(.CLKDV_DIVIDE          (2.000),
@@ -120,7 +123,7 @@ module pll_rx
    .CLK2X180              (),
    .CLKFX                 (),
    .CLKFX180              (),
-    .CLKDV                 (),
+    .CLKDV                 (clkdv),
    // Ports for dynamic phase shift
    .PSCLK                 (1'b0),
    .PSEN                  (1'b0),
@@ -151,6 +154,9 @@ module pll_rx
   (.O   (clk_to_mac),
    .I   (clk0));

+  BUFG clkout4_buf
+   (.O   (clk_rx_div2),
+    .I   (clkdv));


 endmodule
--- a/fpga/coregen/pll_rx.xco
+++ b/fpga/coregen/pll_rx.xco
@@ -1,7 +1,7 @@
 ##############################################################
 #
-# Xilinx Core Generator version 13.1
-# Date: Sat Jan 07 20:42:05 2012
+# Xilinx Core Generator version 14.7
+# Date: Wed Aug  2 17:45:53 2017
 #
 ##############################################################
 #
@@ -12,12 +12,16 @@
 #
 ##############################################################
 #
+#  Generated from component: xilinx.com:ip:Clocking_Wizard:3.6
+#
+##############################################################
+#
 # BEGIN Project Options
 SET addpads = false
 SET asysymbol = true
 SET busformat = BusFormatAngleBracketNotRipped
 SET createndf = false
-SET designentry = Advanced
+SET designentry = Verilog
 SET device = xc6slx75
 SET devicefamily = spartan6
 SET flowvendor = Other
@@ -27,12 +31,12 @@ SET implementationfiletype = Ngc
 SET package = fgg484
 SET removerpms = false
 SET simulationfiles = Behavioral
-SET speedgrade = -3
+SET speedgrade = -2
 SET verilogsim = true
-SET vhdlsim = true
+SET vhdlsim = false
 # END Project Options
 # BEGIN Select
-SELECT Clocking_Wizard family Xilinx,_Inc. 3.1
+SELECT Clocking_Wizard xilinx.com:ip:Clocking_Wizard:3.6
 # END Select
 # BEGIN Parameters
 CSET calc_done=DONE
@@ -79,9 +83,9 @@ CSET clkout3_requested_phase=0.000
 CSET clkout3_used=true
 CSET clkout4_drives=BUFG
 CSET clkout4_requested_duty_cycle=50.000
-CSET clkout4_requested_out_freq=100.000
+CSET clkout4_requested_out_freq=62.500
 CSET clkout4_requested_phase=0.000
-CSET clkout4_used=false
+CSET clkout4_used=true
 CSET clkout5_drives=BUFG
 CSET clkout5_requested_duty_cycle=50.000
 CSET clkout5_requested_out_freq=100.000
@@ -114,6 +118,7 @@ CSET dcm_clkfx_multiply=4
 CSET dcm_clkgen_clk_out1_port=CLKFX
 CSET dcm_clkgen_clk_out2_port=CLKFX
 CSET dcm_clkgen_clk_out3_port=CLKFX
+CSET dcm_clkgen_clk_out4_port=CLKDV
 CSET dcm_clkgen_clkfx_divide=1
 CSET dcm_clkgen_clkfx_md_max=0.000
 CSET dcm_clkgen_clkfx_multiply=4
@@ -165,7 +170,7 @@ CSET mmcm_clkout3_duty_cycle=0.500
 CSET mmcm_clkout3_phase=0.000
 CSET mmcm_clkout3_use_fine_ps=false
 CSET mmcm_clkout4_cascade=false
-CSET mmcm_clkout4_divide=1
+CSET mmcm_clkout4_divide=2
 CSET mmcm_clkout4_duty_cycle=0.500
 CSET mmcm_clkout4_phase=0.000
 CSET mmcm_clkout4_use_fine_ps=false
@@ -207,7 +212,7 @@ CSET pll_clkout2_phase=0.000
 CSET pll_clkout3_divide=1
 CSET pll_clkout3_duty_cycle=0.500
 CSET pll_clkout3_phase=0.000
-CSET pll_clkout4_divide=1
+CSET pll_clkout4_divide=2
 CSET pll_clkout4_duty_cycle=0.500
 CSET pll_clkout4_phase=0.000
 CSET pll_clkout5_divide=1
@@ -253,4 +258,4 @@ CSET use_spread_spectrum=false
 CSET use_status=false
 # END Parameters
 GENERATE
-# CRC: 681ed89a
+# CRC: 42b0e01c
--- a/fpga/top/UmTRX/Makefile.UmTRXv2_nosram
+++ b/fpga/top/UmTRX/Makefile.UmTRXv2_nosram
@@ -0,0 +1,121 @@
+#
+# Copyright 2012 Fairwaves
+#
+
+##################################################
+# Project Setup
+##################################################
+TOP_MODULE = u2plus_umtrx_v2
+BUILD_DIR = $(abspath build$(ISE)_UmTRXv2_nosram)
+
+##################################################
+# Include other makefiles
+##################################################
+
+include ../Makefile.common
+include ../../fifo/Makefile.srcs
+include ../../control_lib/Makefile.srcs
+include ../../sdr_lib/Makefile.srcs
+include ../../serdes/Makefile.srcs
+include ../../simple_gemac/Makefile.srcs
+include ../../timing/Makefile.srcs
+include ../../opencores/Makefile.srcs
+include ../../vrt/Makefile.srcs
+include ../../udp/Makefile.srcs
+include ../../coregen/Makefile.srcs
+include ../../extramfifo/Makefile.srcs
+include ../../gpsdo/Makefile.srcs
+
+
+##################################################
+# Project Properties
+##################################################
+export PROJECT_PROPERTIES := \
+family "Spartan6" \
+device xc6slx75 \
+package fgg484 \
+speed -2 \
+top_level_module_type "HDL" \
+synthesis_tool "XST (VHDL/Verilog)" \
+simulator "ISE Simulator (VHDL/Verilog)" \
+"Preferred Language" "Verilog" \
+"Enable Message Filtering" FALSE \
+"Display Incremental Messages" FALSE 
+
+##################################################
+# Sources
+##################################################
+TOP_SRCS = \
+capture_ddrlvds.v \
+umtrx_core.v \
+umtrx_tx_chain.v \
+umtrx_rx_chain.v \
+umtrx_router.v \
+umtrx_packet_dispatcher.v \
+coregen/chipscope_icon.v \
+coregen/chipscope_icon.xco \
+coregen/chipscope_ila.v \
+coregen/chipscope_ila.xco \
+coregen/fifo_short_2clk.v \
+coregen/fifo_short_2clk.xco \
+coregen/fifo_4k_2clk.v \
+coregen/fifo_4k_2clk.xco \
+coregen/fifo_axi_36.v \
+coregen/fifo_axi_36.xco \
+u2plus_umtrx_v2.v \
+u2plus_umtrx_v2.ucf
+
+
+
+SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \
+$(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \
+$(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \
+$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \
+$(GPSDO_SRCS)
+
+##################################################
+# Process Properties
+##################################################
+SYNTHESIZE_PROPERTIES = \
+"Number of Clock Buffers" 8 \
+"Pack I/O Registers into IOBs" Yes \
+"Optimization Effort" High \
+"Optimize Instantiated Primitives" TRUE \
+"Register Balancing" Yes \
+"Use Clock Enable" Auto \
+"Use Synchronous Reset" Auto \
+"Use Synchronous Set" Auto \
+"Verilog Macros" "LVDS=1 | NO_SERDES=1 | UMTRX=1 | LMS602D_FRONTEND=1 | SPARTAN6=1 | LMS_DSP=1 | NUMDDC=2 | NUMDUC=2 | NO_EXT_FIFO=1 | INTERNAL_FIFOS=1"
+
+TRANSLATE_PROPERTIES = \
+"Macro Search Path" "$(shell pwd)/../../coregen/"
+
+MAP_PROPERTIES = \
+"Generate Detailed MAP Report" TRUE \
+"Allow Logic Optimization Across Hierarchy" TRUE \
+"Map to Input Functions" 4 \
+"Global Optimization" Speed\
+"Optimization Strategy (Cover Mode)" Speed \
+"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \
+"Perform Timing-Driven Packing and Placement" TRUE \
+"Map Effort Level" High \
+"Extra Effort" Normal \
+"Combinatorial Logic Optimization" TRUE \
+"Register Duplication" TRUE
+
+PLACE_ROUTE_PROPERTIES = \
+"Place & Route Effort Level (Overall)" High \
+"Place & Route Extra Effort (Highest PAR level only)" NORMAL
+
+STATIC_TIMING_PROPERTIES = \
+"Number of Paths in Error/Verbose Report" 10 \
+"Report Type" "Error Report"
+
+GEN_PROG_FILE_PROPERTIES = \
+"Configuration Rate" 6 \
+"Create Binary Configuration File" TRUE \
+"Done (Output Events)" 5 \
+"Enable Bitstream Compression" TRUE \
+"Enable Outputs (Output Events)" 6 
+
+SIM_MODEL_PROPERTIES = ""
--- a/fpga/top/UmTRX/coregen/fifo_axi_36.gise
+++ b/fpga/top/UmTRX/coregen/fifo_axi_36.gise
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="fifo_axi_36.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="fifo_axi_36.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="fifo_axi_36.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema">
+    <transform xil_pn:end_ts="1501582277" xil_pn:name="TRAN_copyInitialToXSTAbstractSynthesis" xil_pn:start_ts="1501582277">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1501588912" xil_pn:name="TRAN_schematicsToHdl" xil_pn:prop_ck="-8970095556748691462" xil_pn:start_ts="1501588912">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1501588912" xil_pn:name="TRAN_regenerateCores" xil_pn:prop_ck="1830686490926110834" xil_pn:start_ts="1501588912">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1501588912" xil_pn:name="TRAN_SubProjectAbstractToPreProxy" xil_pn:start_ts="1501588912">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1501588912" xil_pn:name="TRAN_xawsTohdl" xil_pn:prop_ck="5214082714422500266" xil_pn:start_ts="1501588912">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+  </transforms>
+
+</generated_project>
--- a/fpga/top/UmTRX/coregen/fifo_axi_36.v
+++ b/fpga/top/UmTRX/coregen/fifo_axi_36.v
@@ -0,0 +1,491 @@
+/*******************************************************************************
+*     This file is owned and controlled by Xilinx and must be used solely      *
+*     for design, simulation, implementation and creation of design files      *
+*     limited to Xilinx devices or technologies. Use with non-Xilinx           *
+*     devices or technologies is expressly prohibited and immediately          *
+*     terminates your license.                                                 *
+*                                                                              *
+*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY     *
+*     FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY     *
+*     PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE              *
+*     IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS       *
+*     MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY       *
+*     CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY        *
+*     RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY        *
+*     DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE    *
+*     IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR           *
+*     REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF          *
+*     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A    *
+*     PARTICULAR PURPOSE.                                                      *
+*                                                                              *
+*     Xilinx products are not intended for use in life support appliances,     *
+*     devices, or systems.  Use in such applications are expressly             *
+*     prohibited.                                                              *
+*                                                                              *
+*     (c) Copyright 1995-2017 Xilinx, Inc.                                     *
+*     All rights reserved.                                                     *
+*******************************************************************************/
+// You must compile the wrapper file fifo_axi_36.v when simulating
+// the core, fifo_axi_36. When compiling the wrapper file, be sure to
+// reference the XilinxCoreLib Verilog simulation library. For detailed
+// instructions, please refer to the "CORE Generator Help".
+
+// The synthesis directives "translate_off/translate_on" specified below are
+// supported by Xilinx, Mentor Graphics and Synplicity synthesis
+// tools. Ensure they are correct for your synthesis tool(s).
+
+`timescale 1ns/1ps
+
+module fifo_axi_36(
+  m_aclk,
+  s_aclk,
+  s_aresetn,
+  s_axis_tvalid,
+  s_axis_tready,
+  s_axis_tdata,
+  s_axis_tuser,
+  m_axis_tvalid,
+  m_axis_tready,
+  m_axis_tdata,
+  m_axis_tuser
+);
+
+input m_aclk;
+input s_aclk;
+input s_aresetn;
+input s_axis_tvalid;
+output s_axis_tready;
+input [31 : 0] s_axis_tdata;
+input [3 : 0] s_axis_tuser;
+output m_axis_tvalid;
+input m_axis_tready;
+output [31 : 0] m_axis_tdata;
+output [3 : 0] m_axis_tuser;
+
+// synthesis translate_off
+
+  FIFO_GENERATOR_V9_3 #(
+    .C_ADD_NGC_CONSTRAINT(0),
+    .C_APPLICATION_TYPE_AXIS(0),
+    .C_APPLICATION_TYPE_RACH(0),
+    .C_APPLICATION_TYPE_RDCH(0),
+    .C_APPLICATION_TYPE_WACH(0),
+    .C_APPLICATION_TYPE_WDCH(0),
+    .C_APPLICATION_TYPE_WRCH(0),
+    .C_AXI_ADDR_WIDTH(32),
+    .C_AXI_ARUSER_WIDTH(1),
+    .C_AXI_AWUSER_WIDTH(1),
+    .C_AXI_BUSER_WIDTH(1),
+    .C_AXI_DATA_WIDTH(64),
+    .C_AXI_ID_WIDTH(4),
+    .C_AXI_RUSER_WIDTH(1),
+    .C_AXI_TYPE(0),
+    .C_AXI_WUSER_WIDTH(1),
+    .C_AXIS_TDATA_WIDTH(32),
+    .C_AXIS_TDEST_WIDTH(4),
+    .C_AXIS_TID_WIDTH(8),
+    .C_AXIS_TKEEP_WIDTH(4),
+    .C_AXIS_TSTRB_WIDTH(4),
+    .C_AXIS_TUSER_WIDTH(4),
+    .C_AXIS_TYPE(0),
+    .C_COMMON_CLOCK(0),
+    .C_COUNT_TYPE(0),
+    .C_DATA_COUNT_WIDTH(10),
+    .C_DEFAULT_VALUE("BlankString"),
+    .C_DIN_WIDTH(18),
+    .C_DIN_WIDTH_AXIS(36),
+    .C_DIN_WIDTH_RACH(32),
+    .C_DIN_WIDTH_RDCH(64),
+    .C_DIN_WIDTH_WACH(32),
+    .C_DIN_WIDTH_WDCH(64),
+    .C_DIN_WIDTH_WRCH(2),
+    .C_DOUT_RST_VAL("0"),
+    .C_DOUT_WIDTH(18),
+    .C_ENABLE_RLOCS(0),
+    .C_ENABLE_RST_SYNC(1),
+    .C_ERROR_INJECTION_TYPE(0),
+    .C_ERROR_INJECTION_TYPE_AXIS(0),
+    .C_ERROR_INJECTION_TYPE_RACH(0),
+    .C_ERROR_INJECTION_TYPE_RDCH(0),
+    .C_ERROR_INJECTION_TYPE_WACH(0),
+    .C_ERROR_INJECTION_TYPE_WDCH(0),
+    .C_ERROR_INJECTION_TYPE_WRCH(0),
+    .C_FAMILY("spartan6"),
+    .C_FULL_FLAGS_RST_VAL(1),
+    .C_HAS_ALMOST_EMPTY(0),
+    .C_HAS_ALMOST_FULL(0),
+    .C_HAS_AXI_ARUSER(0),
+    .C_HAS_AXI_AWUSER(0),
+    .C_HAS_AXI_BUSER(0),
+    .C_HAS_AXI_RD_CHANNEL(0),
+    .C_HAS_AXI_RUSER(0),
+    .C_HAS_AXI_WR_CHANNEL(0),
+    .C_HAS_AXI_WUSER(0),
+    .C_HAS_AXIS_TDATA(1),
+    .C_HAS_AXIS_TDEST(0),
+    .C_HAS_AXIS_TID(0),
+    .C_HAS_AXIS_TKEEP(0),
+    .C_HAS_AXIS_TLAST(0),
+    .C_HAS_AXIS_TREADY(1),
+    .C_HAS_AXIS_TSTRB(0),
+    .C_HAS_AXIS_TUSER(1),
+    .C_HAS_BACKUP(0),
+    .C_HAS_DATA_COUNT(0),
+    .C_HAS_DATA_COUNTS_AXIS(0),
+    .C_HAS_DATA_COUNTS_RACH(0),
+    .C_HAS_DATA_COUNTS_RDCH(0),
+    .C_HAS_DATA_COUNTS_WACH(0),
+    .C_HAS_DATA_COUNTS_WDCH(0),
+    .C_HAS_DATA_COUNTS_WRCH(0),
+    .C_HAS_INT_CLK(0),
+    .C_HAS_MASTER_CE(0),
+    .C_HAS_MEMINIT_FILE(0),
+    .C_HAS_OVERFLOW(0),
+    .C_HAS_PROG_FLAGS_AXIS(0),
+    .C_HAS_PROG_FLAGS_RACH(0),
+    .C_HAS_PROG_FLAGS_RDCH(0),
+    .C_HAS_PROG_FLAGS_WACH(0),
+    .C_HAS_PROG_FLAGS_WDCH(0),
+    .C_HAS_PROG_FLAGS_WRCH(0),
+    .C_HAS_RD_DATA_COUNT(0),
+    .C_HAS_RD_RST(0),
+    .C_HAS_RST(1),
+    .C_HAS_SLAVE_CE(0),
+    .C_HAS_SRST(0),
+    .C_HAS_UNDERFLOW(0),
+    .C_HAS_VALID(0),
+    .C_HAS_WR_ACK(0),
+    .C_HAS_WR_DATA_COUNT(0),
+    .C_HAS_WR_RST(0),
+    .C_IMPLEMENTATION_TYPE(0),
+    .C_IMPLEMENTATION_TYPE_AXIS(11),
+    .C_IMPLEMENTATION_TYPE_RACH(12),
+    .C_IMPLEMENTATION_TYPE_RDCH(11),
+    .C_IMPLEMENTATION_TYPE_WACH(12),
+    .C_IMPLEMENTATION_TYPE_WDCH(11),
+    .C_IMPLEMENTATION_TYPE_WRCH(12),
+    .C_INIT_WR_PNTR_VAL(0),
+    .C_INTERFACE_TYPE(1),
+    .C_MEMORY_TYPE(1),
+    .C_MIF_FILE_NAME("BlankString"),
+    .C_MSGON_VAL(1),
+    .C_OPTIMIZATION_MODE(0),
+    .C_OVERFLOW_LOW(0),
+    .C_PRELOAD_LATENCY(1),
+    .C_PRELOAD_REGS(0),
+    .C_PRIM_FIFO_TYPE("4kx4"),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL(2),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_AXIS(32765),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_RACH(13),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_RDCH(1021),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_WACH(13),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_WDCH(1021),
+    .C_PROG_EMPTY_THRESH_ASSERT_VAL_WRCH(13),
+    .C_PROG_EMPTY_THRESH_NEGATE_VAL(3),
+    .C_PROG_EMPTY_TYPE(0),
+    .C_PROG_EMPTY_TYPE_AXIS(0),
+    .C_PROG_EMPTY_TYPE_RACH(0),
+    .C_PROG_EMPTY_TYPE_RDCH(0),
+    .C_PROG_EMPTY_TYPE_WACH(0),
+    .C_PROG_EMPTY_TYPE_WDCH(0),
+    .C_PROG_EMPTY_TYPE_WRCH(0),
+    .C_PROG_FULL_THRESH_ASSERT_VAL(1022),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_AXIS(32767),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_RACH(15),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_RDCH(1023),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_WACH(15),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_WDCH(1023),
+    .C_PROG_FULL_THRESH_ASSERT_VAL_WRCH(15),
+    .C_PROG_FULL_THRESH_NEGATE_VAL(1021),
+    .C_PROG_FULL_TYPE(0),
+    .C_PROG_FULL_TYPE_AXIS(0),
+    .C_PROG_FULL_TYPE_RACH(0),
+    .C_PROG_FULL_TYPE_RDCH(0),
+    .C_PROG_FULL_TYPE_WACH(0),
+    .C_PROG_FULL_TYPE_WDCH(0),
+    .C_PROG_FULL_TYPE_WRCH(0),
+    .C_RACH_TYPE(0),
+    .C_RD_DATA_COUNT_WIDTH(10),
+    .C_RD_DEPTH(1024),
+    .C_RD_FREQ(1),
+    .C_RD_PNTR_WIDTH(10),
+    .C_RDCH_TYPE(0),
+    .C_REG_SLICE_MODE_AXIS(0),
+    .C_REG_SLICE_MODE_RACH(0),
+    .C_REG_SLICE_MODE_RDCH(0),
+    .C_REG_SLICE_MODE_WACH(0),
+    .C_REG_SLICE_MODE_WDCH(0),
+    .C_REG_SLICE_MODE_WRCH(0),
+    .C_SYNCHRONIZER_STAGE(2),
+    .C_UNDERFLOW_LOW(0),
+    .C_USE_COMMON_OVERFLOW(0),
+    .C_USE_COMMON_UNDERFLOW(0),
+    .C_USE_DEFAULT_SETTINGS(0),
+    .C_USE_DOUT_RST(1),
+    .C_USE_ECC(0),
+    .C_USE_ECC_AXIS(0),
+    .C_USE_ECC_RACH(0),
+    .C_USE_ECC_RDCH(0),
+    .C_USE_ECC_WACH(0),
+    .C_USE_ECC_WDCH(0),
+    .C_USE_ECC_WRCH(0),
+    .C_USE_EMBEDDED_REG(0),
+    .C_USE_FIFO16_FLAGS(0),
+    .C_USE_FWFT_DATA_COUNT(0),
+    .C_VALID_LOW(0),
+    .C_WACH_TYPE(0),
+    .C_WDCH_TYPE(0),
+    .C_WR_ACK_LOW(0),
+    .C_WR_DATA_COUNT_WIDTH(10),
+    .C_WR_DEPTH(1024),
+    .C_WR_DEPTH_AXIS(32768),
+    .C_WR_DEPTH_RACH(16),
+    .C_WR_DEPTH_RDCH(1024),
+    .C_WR_DEPTH_WACH(16),
+    .C_WR_DEPTH_WDCH(1024),
+    .C_WR_DEPTH_WRCH(16),
+    .C_WR_FREQ(1),
+    .C_WR_PNTR_WIDTH(10),
+    .C_WR_PNTR_WIDTH_AXIS(15),
+    .C_WR_PNTR_WIDTH_RACH(4),
+    .C_WR_PNTR_WIDTH_RDCH(10),
+    .C_WR_PNTR_WIDTH_WACH(4),
+    .C_WR_PNTR_WIDTH_WDCH(10),
+    .C_WR_PNTR_WIDTH_WRCH(4),
+    .C_WR_RESPONSE_LATENCY(1),
+    .C_WRCH_TYPE(0)
+  )
+  inst (
+    .M_ACLK(m_aclk),
+    .S_ACLK(s_aclk),
+    .S_ARESETN(s_aresetn),
+    .S_AXIS_TVALID(s_axis_tvalid),
+    .S_AXIS_TREADY(s_axis_tready),
+    .S_AXIS_TDATA(s_axis_tdata),
+    .S_AXIS_TUSER(s_axis_tuser),
+    .M_AXIS_TVALID(m_axis_tvalid),
+    .M_AXIS_TREADY(m_axis_tready),
+    .M_AXIS_TDATA(m_axis_tdata),
+    .M_AXIS_TUSER(m_axis_tuser),
+    .BACKUP(),
+    .BACKUP_MARKER(),
+    .CLK(),
+    .RST(),
+    .SRST(),
+    .WR_CLK(),
+    .WR_RST(),
+    .RD_CLK(),
+    .RD_RST(),
+    .DIN(),
+    .WR_EN(),
+    .RD_EN(),
+    .PROG_EMPTY_THRESH(),
+    .PROG_EMPTY_THRESH_ASSERT(),
+    .PROG_EMPTY_THRESH_NEGATE(),
+    .PROG_FULL_THRESH(),
+    .PROG_FULL_THRESH_ASSERT(),
+    .PROG_FULL_THRESH_NEGATE(),
+    .INT_CLK(),
+    .INJECTDBITERR(),
+    .INJECTSBITERR(),
+    .DOUT(),
+    .FULL(),
+    .ALMOST_FULL(),
+    .WR_ACK(),
+    .OVERFLOW(),
+    .EMPTY(),
+    .ALMOST_EMPTY(),
+    .VALID(),
+    .UNDERFLOW(),
+    .DATA_COUNT(),
+    .RD_DATA_COUNT(),
+    .WR_DATA_COUNT(),
+    .PROG_FULL(),
+    .PROG_EMPTY(),
+    .SBITERR(),
+    .DBITERR(),
+    .M_ACLK_EN(),
+    .S_ACLK_EN(),
+    .S_AXI_AWID(),
+    .S_AXI_AWADDR(),
+    .S_AXI_AWLEN(),
+    .S_AXI_AWSIZE(),
+    .S_AXI_AWBURST(),
+    .S_AXI_AWLOCK(),
+    .S_AXI_AWCACHE(),
+    .S_AXI_AWPROT(),
+    .S_AXI_AWQOS(),
+    .S_AXI_AWREGION(),
+    .S_AXI_AWUSER(),
+    .S_AXI_AWVALID(),
+    .S_AXI_AWREADY(),
+    .S_AXI_WID(),
+    .S_AXI_WDATA(),
+    .S_AXI_WSTRB(),
+    .S_AXI_WLAST(),
+    .S_AXI_WUSER(),
+    .S_AXI_WVALID(),
+    .S_AXI_WREADY(),
+    .S_AXI_BID(),
+    .S_AXI_BRESP(),
+    .S_AXI_BUSER(),
+    .S_AXI_BVALID(),
+    .S_AXI_BREADY(),
+    .M_AXI_AWID(),
+    .M_AXI_AWADDR(),
+    .M_AXI_AWLEN(),
+    .M_AXI_AWSIZE(),
+    .M_AXI_AWBURST(),
+    .M_AXI_AWLOCK(),
+    .M_AXI_AWCACHE(),
+    .M_AXI_AWPROT(),
+    .M_AXI_AWQOS(),
+    .M_AXI_AWREGION(),
+    .M_AXI_AWUSER(),
+    .M_AXI_AWVALID(),
+    .M_AXI_AWREADY(),
+    .M_AXI_WID(),
+    .M_AXI_WDATA(),
+    .M_AXI_WSTRB(),
+    .M_AXI_WLAST(),
+    .M_AXI_WUSER(),
+    .M_AXI_WVALID(),
+    .M_AXI_WREADY(),
+    .M_AXI_BID(),
+    .M_AXI_BRESP(),
+    .M_AXI_BUSER(),
+    .M_AXI_BVALID(),
+    .M_AXI_BREADY(),
+    .S_AXI_ARID(),
+    .S_AXI_ARADDR(),
+    .S_AXI_ARLEN(),
+    .S_AXI_ARSIZE(),
+    .S_AXI_ARBURST(),
+    .S_AXI_ARLOCK(),
+    .S_AXI_ARCACHE(),
+    .S_AXI_ARPROT(),
+    .S_AXI_ARQOS(),
+    .S_AXI_ARREGION(),
+    .S_AXI_ARUSER(),
+    .S_AXI_ARVALID(),
+    .S_AXI_ARREADY(),
+    .S_AXI_RID(),
+    .S_AXI_RDATA(),
+    .S_AXI_RRESP(),
+    .S_AXI_RLAST(),
+    .S_AXI_RUSER(),
+    .S_AXI_RVALID(),
+    .S_AXI_RREADY(),
+    .M_AXI_ARID(),
+    .M_AXI_ARADDR(),
+    .M_AXI_ARLEN(),
+    .M_AXI_ARSIZE(),
+    .M_AXI_ARBURST(),
+    .M_AXI_ARLOCK(),
+    .M_AXI_ARCACHE(),
+    .M_AXI_ARPROT(),
+    .M_AXI_ARQOS(),
+    .M_AXI_ARREGION(),
+    .M_AXI_ARUSER(),
+    .M_AXI_ARVALID(),
+    .M_AXI_ARREADY(),
+    .M_AXI_RID(),
+    .M_AXI_RDATA(),
+    .M_AXI_RRESP(),
+    .M_AXI_RLAST(),
+    .M_AXI_RUSER(),
+    .M_AXI_RVALID(),
+    .M_AXI_RREADY(),
+    .S_AXIS_TSTRB(),
+    .S_AXIS_TKEEP(),
+    .S_AXIS_TLAST(),
+    .S_AXIS_TID(),
+    .S_AXIS_TDEST(),
+    .M_AXIS_TSTRB(),
+    .M_AXIS_TKEEP(),
+    .M_AXIS_TLAST(),
+    .M_AXIS_TID(),
+    .M_AXIS_TDEST(),
+    .AXI_AW_INJECTSBITERR(),
+    .AXI_AW_INJECTDBITERR(),
+    .AXI_AW_PROG_FULL_THRESH(),
+    .AXI_AW_PROG_EMPTY_THRESH(),
+    .AXI_AW_DATA_COUNT(),
+    .AXI_AW_WR_DATA_COUNT(),
+    .AXI_AW_RD_DATA_COUNT(),
+    .AXI_AW_SBITERR(),
+    .AXI_AW_DBITERR(),
+    .AXI_AW_OVERFLOW(),
+    .AXI_AW_UNDERFLOW(),
+    .AXI_AW_PROG_FULL(),
+    .AXI_AW_PROG_EMPTY(),
+    .AXI_W_INJECTSBITERR(),
+    .AXI_W_INJECTDBITERR(),
+    .AXI_W_PROG_FULL_THRESH(),
+    .AXI_W_PROG_EMPTY_THRESH(),
+    .AXI_W_DATA_COUNT(),
+    .AXI_W_WR_DATA_COUNT(),
+    .AXI_W_RD_DATA_COUNT(),
+    .AXI_W_SBITERR(),
+    .AXI_W_DBITERR(),
+    .AXI_W_OVERFLOW(),
+    .AXI_W_UNDERFLOW(),
+    .AXI_B_INJECTSBITERR(),
+    .AXI_W_PROG_FULL(),
+    .AXI_W_PROG_EMPTY(),
+    .AXI_B_INJECTDBITERR(),
+    .AXI_B_PROG_FULL_THRESH(),
+    .AXI_B_PROG_EMPTY_THRESH(),
+    .AXI_B_DATA_COUNT(),
+    .AXI_B_WR_DATA_COUNT(),
+    .AXI_B_RD_DATA_COUNT(),
+    .AXI_B_SBITERR(),
+    .AXI_B_DBITERR(),
+    .AXI_B_OVERFLOW(),
+    .AXI_B_UNDERFLOW(),
+    .AXI_AR_INJECTSBITERR(),
+    .AXI_B_PROG_FULL(),
+    .AXI_B_PROG_EMPTY(),
+    .AXI_AR_INJECTDBITERR(),
+    .AXI_AR_PROG_FULL_THRESH(),
+    .AXI_AR_PROG_EMPTY_THRESH(),
+    .AXI_AR_DATA_COUNT(),
+    .AXI_AR_WR_DATA_COUNT(),
+    .AXI_AR_RD_DATA_COUNT(),
+    .AXI_AR_SBITERR(),
+    .AXI_AR_DBITERR(),
+    .AXI_AR_OVERFLOW(),
+    .AXI_AR_UNDERFLOW(),
+    .AXI_AR_PROG_FULL(),
+    .AXI_AR_PROG_EMPTY(),
+    .AXI_R_INJECTSBITERR(),
+    .AXI_R_INJECTDBITERR(),
+    .AXI_R_PROG_FULL_THRESH(),
+    .AXI_R_PROG_EMPTY_THRESH(),
+    .AXI_R_DATA_COUNT(),
+    .AXI_R_WR_DATA_COUNT(),
+    .AXI_R_RD_DATA_COUNT(),
+    .AXI_R_SBITERR(),
+    .AXI_R_DBITERR(),
+    .AXI_R_OVERFLOW(),
+    .AXI_R_UNDERFLOW(),
+    .AXIS_INJECTSBITERR(),
+    .AXI_R_PROG_FULL(),
+    .AXI_R_PROG_EMPTY(),
+    .AXIS_INJECTDBITERR(),
+    .AXIS_PROG_FULL_THRESH(),
+    .AXIS_PROG_EMPTY_THRESH(),
+    .AXIS_DATA_COUNT(),
+    .AXIS_WR_DATA_COUNT(),
+    .AXIS_RD_DATA_COUNT(),
+    .AXIS_SBITERR(),
+    .AXIS_DBITERR(),
+    .AXIS_OVERFLOW(),
+    .AXIS_UNDERFLOW(),
+    .AXIS_PROG_FULL(),
+    .AXIS_PROG_EMPTY()
+  );
+
+// synthesis translate_on
+
+endmodule
--- a/fpga/top/UmTRX/coregen/fifo_axi_36.xco
+++ b/fpga/top/UmTRX/coregen/fifo_axi_36.xco
@@ -0,0 +1,213 @@
+##############################################################
+#
+# Xilinx Core Generator version 14.7
+# Date: Tue Aug  1 09:18:38 2017
+#
+##############################################################
+#
+#  This file contains the customisation parameters for a
+#  Xilinx CORE Generator IP GUI. It is strongly recommended
+#  that you do not manually alter this file as it may cause
+#  unexpected and unsupported behavior.
+#
+##############################################################
+#
+#  Generated from component: xilinx.com:ip:fifo_generator:9.3
+#
+##############################################################
+#
+# BEGIN Project Options
+SET addpads = false
+SET asysymbol = true
+SET busformat = BusFormatAngleBracketNotRipped
+SET createndf = false
+SET designentry = Verilog
+SET device = xc6slx75
+SET devicefamily = spartan6
+SET flowvendor = Other
+SET formalverification = false
+SET foundationsym = false
+SET implementationfiletype = Ngc
+SET package = fgg484
+SET removerpms = false
+SET simulationfiles = Behavioral
+SET speedgrade = -2
+SET verilogsim = true
+SET vhdlsim = false
+# END Project Options
+# BEGIN Select
+SELECT FIFO_Generator xilinx.com:ip:fifo_generator:9.3
+# END Select
+# BEGIN Parameters
+CSET add_ngc_constraint_axi=false
+CSET almost_empty_flag=false
+CSET almost_full_flag=false
+CSET aruser_width=1
+CSET awuser_width=1
+CSET axi_address_width=32
+CSET axi_data_width=64
+CSET axi_type=AXI4_Stream
+CSET axis_type=FIFO
+CSET buser_width=1
+CSET clock_enable_type=Slave_Interface_Clock_Enable
+CSET clock_type_axi=Independent_Clock
+CSET component_name=fifo_axi_36
+CSET data_count=false
+CSET data_count_width=10
+CSET disable_timing_violations=false
+CSET disable_timing_violations_axi=false
+CSET dout_reset_value=0
+CSET empty_threshold_assert_value=2
+CSET empty_threshold_assert_value_axis=32765
+CSET empty_threshold_assert_value_rach=13
+CSET empty_threshold_assert_value_rdch=1021
+CSET empty_threshold_assert_value_wach=13
+CSET empty_threshold_assert_value_wdch=1021
+CSET empty_threshold_assert_value_wrch=13
+CSET empty_threshold_negate_value=3
+CSET enable_aruser=false
+CSET enable_awuser=false
+CSET enable_buser=false
+CSET enable_common_overflow=false
+CSET enable_common_underflow=false
+CSET enable_data_counts_axis=false
+CSET enable_data_counts_rach=false
+CSET enable_data_counts_rdch=false
+CSET enable_data_counts_wach=false
+CSET enable_data_counts_wdch=false
+CSET enable_data_counts_wrch=false
+CSET enable_ecc=false
+CSET enable_ecc_axis=false
+CSET enable_ecc_rach=false
+CSET enable_ecc_rdch=false
+CSET enable_ecc_wach=false
+CSET enable_ecc_wdch=false
+CSET enable_ecc_wrch=false
+CSET enable_read_channel=false
+CSET enable_read_pointer_increment_by2=false
+CSET enable_reset_synchronization=true
+CSET enable_ruser=false
+CSET enable_tdata=true
+CSET enable_tdest=false
+CSET enable_tid=false
+CSET enable_tkeep=false
+CSET enable_tlast=false
+CSET enable_tready=true
+CSET enable_tstrobe=false
+CSET enable_tuser=true
+CSET enable_write_channel=false
+CSET enable_wuser=false
+CSET fifo_application_type_axis=Data_FIFO
+CSET fifo_application_type_rach=Data_FIFO
+CSET fifo_application_type_rdch=Data_FIFO
+CSET fifo_application_type_wach=Data_FIFO
+CSET fifo_application_type_wdch=Data_FIFO
+CSET fifo_application_type_wrch=Data_FIFO
+CSET fifo_implementation=Common_Clock_Block_RAM
+CSET fifo_implementation_axis=Independent_Clocks_Block_RAM
+CSET fifo_implementation_rach=Independent_Clocks_Distributed_RAM
+CSET fifo_implementation_rdch=Independent_Clocks_Block_RAM
+CSET fifo_implementation_wach=Independent_Clocks_Distributed_RAM
+CSET fifo_implementation_wdch=Independent_Clocks_Block_RAM
+CSET fifo_implementation_wrch=Independent_Clocks_Distributed_RAM
+CSET full_flags_reset_value=1
+CSET full_threshold_assert_value=1022
+CSET full_threshold_assert_value_axis=32767
+CSET full_threshold_assert_value_rach=15
+CSET full_threshold_assert_value_rdch=1023
+CSET full_threshold_assert_value_wach=15
+CSET full_threshold_assert_value_wdch=1023
+CSET full_threshold_assert_value_wrch=15
+CSET full_threshold_negate_value=1021
+CSET id_width=4
+CSET inject_dbit_error=false
+CSET inject_dbit_error_axis=false
+CSET inject_dbit_error_rach=false
+CSET inject_dbit_error_rdch=false
+CSET inject_dbit_error_wach=false
+CSET inject_dbit_error_wdch=false
+CSET inject_dbit_error_wrch=false
+CSET inject_sbit_error=false
+CSET inject_sbit_error_axis=false
+CSET inject_sbit_error_rach=false
+CSET inject_sbit_error_rdch=false
+CSET inject_sbit_error_wach=false
+CSET inject_sbit_error_wdch=false
+CSET inject_sbit_error_wrch=false
+CSET input_data_width=18
+CSET input_depth=1024
+CSET input_depth_axis=32768
+CSET input_depth_rach=16
+CSET input_depth_rdch=1024
+CSET input_depth_wach=16
+CSET input_depth_wdch=1024
+CSET input_depth_wrch=16
+CSET interface_type=AXI4
+CSET output_data_width=18
+CSET output_depth=1024
+CSET overflow_flag=false
+CSET overflow_flag_axi=false
+CSET overflow_sense=Active_High
+CSET overflow_sense_axi=Active_High
+CSET performance_options=Standard_FIFO
+CSET programmable_empty_type=No_Programmable_Empty_Threshold
+CSET programmable_empty_type_axis=No_Programmable_Empty_Threshold
+CSET programmable_empty_type_rach=No_Programmable_Empty_Threshold
+CSET programmable_empty_type_rdch=No_Programmable_Empty_Threshold
+CSET programmable_empty_type_wach=No_Programmable_Empty_Threshold
+CSET programmable_empty_type_wdch=No_Programmable_Empty_Threshold
+CSET programmable_empty_type_wrch=No_Programmable_Empty_Threshold
+CSET programmable_full_type=No_Programmable_Full_Threshold
+CSET programmable_full_type_axis=No_Programmable_Full_Threshold
+CSET programmable_full_type_rach=No_Programmable_Full_Threshold
+CSET programmable_full_type_rdch=No_Programmable_Full_Threshold
+CSET programmable_full_type_wach=No_Programmable_Full_Threshold
+CSET programmable_full_type_wdch=No_Programmable_Full_Threshold
+CSET programmable_full_type_wrch=No_Programmable_Full_Threshold
+CSET rach_type=FIFO
+CSET rdch_type=FIFO
+CSET read_clock_frequency=1
+CSET read_data_count=false
+CSET read_data_count_width=10
+CSET register_slice_mode_axis=Fully_Registered
+CSET register_slice_mode_rach=Fully_Registered
+CSET register_slice_mode_rdch=Fully_Registered
+CSET register_slice_mode_wach=Fully_Registered
+CSET register_slice_mode_wdch=Fully_Registered
+CSET register_slice_mode_wrch=Fully_Registered
+CSET reset_pin=true
+CSET reset_type=Asynchronous_Reset
+CSET ruser_width=1
+CSET synchronization_stages=2
+CSET synchronization_stages_axi=2
+CSET tdata_width=32
+CSET tdest_width=4
+CSET tid_width=8
+CSET tkeep_width=4
+CSET tstrb_width=4
+CSET tuser_width=4
+CSET underflow_flag=false
+CSET underflow_flag_axi=false
+CSET underflow_sense=Active_High
+CSET underflow_sense_axi=Active_High
+CSET use_clock_enable=false
+CSET use_dout_reset=true
+CSET use_embedded_registers=false
+CSET use_extra_logic=false
+CSET valid_flag=false
+CSET valid_sense=Active_High
+CSET wach_type=FIFO
+CSET wdch_type=FIFO
+CSET wrch_type=FIFO
+CSET write_acknowledge_flag=false
+CSET write_acknowledge_sense=Active_High
+CSET write_clock_frequency=1
+CSET write_data_count=false
+CSET write_data_count_width=10
+CSET wuser_width=1
+# END Parameters
+# BEGIN Extra information
+MISC pkg_timestamp=2012-11-19T12:39:56Z
+# END Extra information
+GENERATE
+# CRC: ef6b9ccd
--- a/fpga/top/UmTRX/coregen/fifo_axi_36.xise
+++ b/fpga/top/UmTRX/coregen/fifo_axi_36.xise
@@ -0,0 +1,73 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <header>
+    <!-- ISE source project file created by Project Navigator.             -->
+    <!--                                                                   -->
+    <!-- This file contains project source information including a list of -->
+    <!-- project source files, project and process properties.  This file, -->
+    <!-- along with the project source files, is sufficient to open and    -->
+    <!-- implement in ISE Project Navigator.                               -->
+    <!--                                                                   -->
+    <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+  </header>
+
+  <version xil_pn:ise_version="14.7" xil_pn:schema_version="2"/>
+
+  <files>
+    <file xil_pn:name="fifo_axi_36.ngc" xil_pn:type="FILE_NGC">
+      <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="2"/>
+      <association xil_pn:name="Implementation" xil_pn:seqID="1"/>
+    </file>
+    <file xil_pn:name="fifo_axi_36.v" xil_pn:type="FILE_VERILOG">
+      <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="4"/>
+      <association xil_pn:name="Implementation" xil_pn:seqID="0"/>
+      <association xil_pn:name="PostMapSimulation" xil_pn:seqID="4"/>
+      <association xil_pn:name="PostRouteSimulation" xil_pn:seqID="4"/>
+      <association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="4"/>
+    </file>
+  </files>
+
+  <properties>
+    <property xil_pn:name="Auto Implementation Top" xil_pn:value="false" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="Device" xil_pn:value="xc6slx75" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="Device Family" xil_pn:value="Spartan6" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="true" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="Implementation Stop View" xil_pn:value="PreSynthesis" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="Implementation Top" xil_pn:value="Module|fifo_axi_36" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="Implementation Top File" xil_pn:value="fifo_axi_36.ngc" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="Implementation Top Instance Path" xil_pn:value="/fifo_axi_36" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="Package" xil_pn:value="fgg484" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="Preferred Language" xil_pn:value="Verilog" xil_pn:valueState="default"/>
+    <property xil_pn:name="Project Generator" xil_pn:value="CoreGen" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/>
+    <property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/>
+    <property xil_pn:name="Speed Grade" xil_pn:value="-2" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/>
+    <property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/>
+    <property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/>
+    <!--                                                                                  -->
+    <!-- The following properties are for internal use only. These should not be modified.-->
+    <!--                                                                                  -->
+    <property xil_pn:name="PROP_DesignName" xil_pn:value="fifo_axi_36" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan6" xil_pn:valueState="default"/>
+    <property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2017-08-01T12:21:22" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="3A42A837D86A509961F66E126F05239A" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/>
+    <property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/>
+  </properties>
+
+  <bindings/>
+
+  <libraries/>
+
+  <autoManagedFiles>
+    <!-- The following files are identified by `include statements in verilog -->
+    <!-- source files and are automatically managed by Project Navigator.     -->
+    <!--                                                                      -->
+    <!-- Do not hand-edit this section, as it will be overwritten when the    -->
+    <!-- project is analyzed based on files automatically identified as       -->
+    <!-- include files.                                                       -->
+  </autoManagedFiles>
+
+</project>
--- a/fpga/top/UmTRX/u2plus_umtrx_v2.v
+++ b/fpga/top/UmTRX/u2plus_umtrx_v2.v
@@ -216,15 +216,18 @@ wire DivSw1, DivSw2;
    // Status and control signals
    .LOCKED_OUT(led_stat));      // OUT

+   wire clk_rx_div2;
+
   pll_rx pll_rx_instance
   (// Clock in ports
    .gmii_rx_clk(GMII_RX_CLK),      // IN
    // Clock out ports
    .clk_rx(clk_rx),     // OUT
    .clk_to_mac(CLK_TO_MAC_int2), // OUT
-    .clk_rx_180(clk_rx_180));    // OUT
-
+    .clk_rx_180(clk_rx_180),
+    .clk_rx_div2(clk_rx_div2));    // OUT

+`ifndef NO_EXT_FIFO
   OFDDRRSE RAM_CLK_i1 (.Q(RAM_CLK),
 			.C0(clk270_100_buf),
 			.C1(~clk270_100_buf),
@@ -233,7 +236,17 @@ wire DivSw1, DivSw2;
 			.D1(1'b0),
 			.R(1'b0),
 			.S(1'b0));
-  
+`else
+   assign RAM_A    = 0;
+   assign RAM_BWn  = ~0;
+   assign RAM_ZZ   = 1;
+   assign RAM_LDn  = 1;
+   assign RAM_OEn  = 1;
+   assign RAM_WEn  = 1;
+   assign RAM_CENn = 1;
+   assign RAM_CLK  = 1;
+`endif
+
   // I2C -- Don't use external transistors for open drain, the FPGA implements this
   IOBUF scl_pin(.O(scl_pad_i), .IO(SCL), .I(scl_pad_o), .T(scl_pad_oen_o));
   IOBUF sda_pin(.O(sda_pad_i), .IO(SDA), .I(sda_pad_o), .T(sda_pad_oen_o));
@@ -276,7 +289,7 @@ wire DivSw1, DivSw2;
      .R(0),      // Synchronous reset input
      .S(0)       // Synchronous preset input
      );
-   
+

   //
   // Instantiate IO for Bidirectional bus to SRAM
@@ -335,7 +348,7 @@ wire DivSw1, DivSw2;
   end

   umtrx_core u2p_c(
-		     .sys_clk           (dsp_clk),
+		     .sys_clk           (clk_rx_div2),
 		     .dsp_clk           (lms_clk),
 		     .fe_clk            (clk_icap), //1/2 dsp rate
 		     .wb_clk            (wb_clk),
--- a/fpga/top/UmTRX/umtrx_core.v
+++ b/fpga/top/UmTRX/umtrx_core.v
@@ -624,8 +624,13 @@ module umtrx_core
     (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.changed(sfc_clear));

   wire sram_clear;
+`ifdef INTERNAL_FIFOS
+   setting_reg #(.my_addr(SR_MISC+2),.width(1)) sr_sram_clear
+     (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.changed(sram_clear));
+`else
   setting_reg #(.my_addr(SR_MISC+2),.width(1)) sr_sram_clear
     (.clk(sys_clk),.rst(sys_rst),.strobe(set_stb_sys),.addr(set_addr_sys),.in(set_data_sys),.changed(sram_clear));
+`endif

   setting_reg #(.my_addr(SR_MISC+4),.width(1)) sr_phy
     (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),.in(set_data),.out(phy_reset),.changed());
@@ -896,10 +901,15 @@ module umtrx_core
    );

   // /////////////////////////////////////////////////////////////////////////
-   // TX chains
-    wire [35:0] sram0_data, sram1_data;
-    wire sram0_valid, sram1_valid;
-    wire sram0_ready, sram1_ready;
+   // TX chains 
+	 wire [35:0] vita0_data_dsp;
+    wire vita0_valid_dsp;
+    wire vita0_ready_dsp;
+
+    wire [35:0] vita1_data_dsp;
+    wire vita1_valid_dsp;
+    wire vita1_ready_dsp;
+	 
    wire run_tx_dsp0, run_tx_dsp1;

    //switch to select frontend used per DSP
@@ -931,12 +941,12 @@ module umtrx_core
        .set_stb_dsp(set_stb_dsp), .set_addr_dsp(set_addr_dsp), .set_data_dsp(set_data_dsp),
        .set_stb_fe(set_stb_fe), .set_addr_fe(set_addr_fe), .set_data_fe(set_data_fe),
        .front_i(dac0_a_int), .front_q(dac0_b_int), .dac_stb(dac0_strobe), .run(run_tx_dsp0),
-        .vita_data_sys(sram0_data), .vita_valid_sys(sram0_valid), .vita_ready_sys(sram0_ready),
+        .vita_data_dsp(vita0_data_dsp), .vita_valid_dsp(vita0_valid_dsp), .vita_ready_dsp(vita0_ready_dsp),
        .err_data_sys(err_tx0_data), .err_valid_sys(err_tx0_valid), .err_ready_sys(err_tx0_ready),
        .vita_time(vita_time)
    );
    end else begin
-        assign sram0_ready = 1;
+        assign vita0_ready_dsp = 1;
        assign err_tx0_valid = 0;
        assign run_tx_dsp0 = 0;
    end
@@ -957,12 +967,12 @@ module umtrx_core
        .set_stb_dsp(set_stb_dsp), .set_addr_dsp(set_addr_dsp), .set_data_dsp(set_data_dsp),
        .set_stb_fe(set_stb_fe), .set_addr_fe(set_addr_fe), .set_data_fe(set_data_fe),
        .front_i(dac1_a_int), .front_q(dac1_b_int), .dac_stb(dac1_strobe), .run(run_tx_dsp1),
-        .vita_data_sys(sram1_data), .vita_valid_sys(sram1_valid), .vita_ready_sys(sram1_ready),
+        .vita_data_dsp(vita1_data_dsp), .vita_valid_dsp(vita1_valid_dsp), .vita_ready_dsp(vita1_ready_dsp),
        .err_data_sys(err_tx1_data), .err_valid_sys(err_tx1_valid), .err_ready_sys(err_tx1_ready),
        .vita_time(vita_time)
    );
    end else begin
-        assign sram1_ready = 1;
+        assign vita1_ready_dsp = 1;
        assign err_tx1_valid = 0;
        assign run_tx_dsp1 = 0;
    end
@@ -986,6 +996,77 @@ module umtrx_core

   // ///////////////////////////////////////////////////////////////////////////////////
   // DSP TX
+//`define INTERNAL_FIFOS
+
+`ifdef INTERNAL_FIFOS
+    wire [35:0] vita0_data_cc;
+    wire [35:0] vita1_data_cc;
+    wire vita0_valid_cc, vita1_valid_cc;
+    wire vita0_ready_cc, vita1_ready_cc;
+
+    axi_fifo_2clk #(.WIDTH(36), .SIZE(9)) fifo_tx0_sys_dsp
+    (
+        .i_aclk(sys_clk), .i_tdata(dsp_tx0_data), .i_tvalid(dsp_tx0_valid), .i_tready(dsp_tx0_ready),
+        .o_aclk(dsp_clk), .o_tdata(vita0_data_cc), .o_tvalid(vita0_valid_cc), .o_tready(vita0_ready_cc),
+        .reset(dsp_rst | sys_rst | sram_clear)
+    );
+
+    axi_fifo_2clk #(.WIDTH(36), .SIZE(9)) fifo_tx1_sys_dsp
+    (
+        .i_aclk(sys_clk), .i_tdata(dsp_tx1_data), .i_tvalid(dsp_tx1_valid), .i_tready(dsp_tx1_ready),
+        .o_aclk(dsp_clk), .o_tdata(vita1_data_cc), .o_tvalid(vita1_valid_cc), .o_tready(vita1_ready_cc),
+        .reset(dsp_rst | sys_rst | sram_clear)
+    );
+
+   fifo_axi_36 ififo0(
+		.s_aclk(dsp_clk),
+		.s_aresetn(~((dsp_rst | sram_clear))),
+
+		.s_axis_tvalid(vita0_valid_cc),
+		.s_axis_tready(vita0_ready_cc),
+		.s_axis_tdata(vita0_data_cc[31:0]),
+		.s_axis_tuser(vita0_data_cc[35:32]),
+
+		.m_aclk(dsp_clk),
+		.m_axis_tvalid(vita0_valid_dsp),
+		.m_axis_tready(vita0_ready_dsp),
+		.m_axis_tdata(vita0_data_dsp[31:0]),
+		.m_axis_tuser(vita0_data_dsp[35:32])
+	);
+	
+   fifo_axi_36 ififo1(
+		.s_aclk(dsp_clk),
+		.s_aresetn(~((dsp_rst | sram_clear))),
+
+		.s_axis_tvalid(vita1_valid_cc),
+		.s_axis_tready(vita1_ready_cc),
+		.s_axis_tdata(vita1_data_cc[31:0]),
+		.s_axis_tuser(vita1_data_cc[35:32]),
+
+		.m_aclk(dsp_clk),
+		.m_axis_tvalid(vita1_valid_dsp),
+		.m_axis_tready(vita1_ready_dsp),
+		.m_axis_tdata(vita1_data_dsp[31:0]),
+		.m_axis_tuser(vita1_data_dsp[35:32])
+	);
+`else
+    wire [35:0] sram0_data, sram1_data;
+    wire sram0_valid, sram1_valid;
+    wire sram0_ready, sram1_ready;
+
+    axi_fifo_2clk #(.WIDTH(36), .SIZE(0)) fifo_tx0_2clock_vita
+    (
+        .i_aclk(sys_clk), .i_tdata(sram0_data), .i_tvalid(sram0_valid), .i_tready(sram0_ready),
+        .o_aclk(dsp_clk), .o_tdata(vita0_data_dsp), .o_tvalid(vita0_valid_dsp), .o_tready(vita0_ready_dsp),
+        .reset(dsp_rst | sys_rst)
+    );
+
+    axi_fifo_2clk #(.WIDTH(36), .SIZE(0)) fifo_tx1_2clock_vita
+    (
+        .i_aclk(sys_clk), .i_tdata(sram1_data), .i_tvalid(sram1_valid), .i_tready(sram1_ready),
+        .o_aclk(dsp_clk), .o_tdata(vita1_data_dsp), .o_tvalid(vita1_valid_dsp), .o_tready(vita1_ready_dsp),
+        .reset(dsp_rst | sys_rst)
+    );

 `ifndef NO_EXT_FIFO
   assign 	 RAM_A[20:19] = 2'b0;
@@ -1030,6 +1111,7 @@ module umtrx_core
 	.dataout_1(sram1_data),
 	.debug(debug_extfifo),
 	.debug2(debug_extfifo2) );
+`endif

   // /////////////////////////////////////////////////////////////////////////
   // VITA Timing
--- a/fpga/top/UmTRX/umtrx_tx_chain.v
+++ b/fpga/top/UmTRX/umtrx_tx_chain.v
@@ -37,10 +37,10 @@ module umtrx_tx_chain
    input dac_stb,
    output run,

-    //sys clock domain
-    input [35:0] vita_data_sys,
-    input vita_valid_sys,
-    output vita_ready_sys,
+    //dsp clock domain
+    input [35:0] vita_data_dsp,
+    input vita_valid_dsp,
+    output vita_ready_dsp,

    //sys clock domain
    output [35:0] err_data_sys,
@@ -91,9 +91,15 @@ module umtrx_tx_chain
    /*******************************************************************
     * TX VITA deframer
     ******************************************************************/
-    wire [35:0] vita_data_dsp, err_data_dsp;
-    wire vita_valid_dsp, err_valid_dsp;
-    wire vita_ready_dsp, err_ready_dsp;
+	  /*
+    wire [35:0] vita_data_dsp;
+    wire vita_valid_dsp;
+    wire vita_ready_dsp;
+	 */
+	 
+	 wire [35:0] err_data_dsp;
+	 wire err_valid_dsp;
+    wire err_ready_dsp;

    vita_tx_chain #(.BASE(CTRL_BASE), .UNIT(PROT_DEST), .FIFOSIZE(FIFOSIZE),
        .REPORT_ERROR(1), .DO_FLOW_CONTROL(1),
@@ -114,12 +120,14 @@ module umtrx_tx_chain
    /*******************************************************************
     * Cross clock fifo from sys to dsp clock domain
     ******************************************************************/
+	  /*
    axi_fifo_2clk #(.WIDTH(36), .SIZE(0)) fifo_2clock_vita
    (
        .i_aclk(sys_clk), .i_tdata(vita_data_sys), .i_tvalid(vita_valid_sys), .i_tready(vita_ready_sys),
        .o_aclk(dsp_clk), .o_tdata(vita_data_dsp), .o_tvalid(vita_valid_dsp), .o_tready(vita_ready_dsp),
        .reset(dsp_rst | sys_rst)
    );
+	 */
    axi_fifo_2clk #(.WIDTH(36), .SIZE(0)) fifo_2clock_err
    (
        .i_aclk(dsp_clk), .i_tdata(err_data_dsp), .i_tvalid(err_valid_dsp), .i_tready(err_ready_dsp),